diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index d5072c070..87146750b 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/Marlin/src/Marlin.cpp b/Marlin/src/Marlin.cpp
index a60c62501..e73066fab 100644
--- a/Marlin/src/Marlin.cpp
+++ b/Marlin/src/Marlin.cpp
@@ -153,7 +153,7 @@
   #include "feature/fanmux.h"
 #endif
 
-#if DO_SWITCH_EXTRUDER || ANY(SWITCHING_NOZZLE, PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
+#if DO_SWITCH_EXTRUDER || ANY(SWITCHING_NOZZLE, PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #include "module/tool_change.h"
 #endif
 
@@ -1078,6 +1078,10 @@ void setup() {
     pe_solenoid_init();
   #endif
 
+  #if ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    est_init();
+  #endif
+
   #if ENABLED(POWER_LOSS_RECOVERY)
     recovery.check();
   #endif
diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h
index 6f5d51af1..97b6087db 100644
--- a/Marlin/src/inc/SanityCheck.h
+++ b/Marlin/src/inc/SanityCheck.h
@@ -835,48 +835,42 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
   );
 #endif
 
+/**
+ * Special tool-changing options
+ */
+#if 1 < 0 \
+  + ENABLED(SINGLENOZZLE) \
+  + ENABLED(DUAL_X_CARRIAGE) \
+  + ENABLED(PARKING_EXTRUDER) \
+  + ENABLED(MAGNETIC_PARKING_EXTRUDER) \
+  + ENABLED(SWITCHING_TOOLHEAD) \
+  + ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) \
+  + ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+  #error "Please select only one of SINGLENOZZLE, DUAL_X_CARRIAGE, PARKING_EXTRUDER, SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, or ELECTROMAGNETIC_SWITCHING_TOOLHEAD."
+#endif
+
 /**
  * (Magnetic) Parking Extruder requirements
  */
-#if ENABLED(PARKING_EXTRUDER)
-  #if ENABLED(DUAL_X_CARRIAGE)
-    #error "PARKING_EXTRUDER and DUAL_X_CARRIAGE are incompatible."
-  #elif ENABLED(SINGLENOZZLE)
-    #error "PARKING_EXTRUDER and SINGLENOZZLE are incompatible."
-  #elif ENABLED(EXT_SOLENOID)
-    #error "PARKING_EXTRUDER and EXT_SOLENOID are incompatible. (Pins are used twice.)"
-  #elif ENABLED(MAGNETIC_PARKING_EXTRUDER)
-    #error "Enable only one of PARKING_EXTRUDER and MAGNETIC_PARKING_EXTRUDER."
+#if ANY(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
+  #if ENABLED(EXT_SOLENOID)
+    #error "(MAGNETIC_)PARKING_EXTRUDER and EXT_SOLENOID are incompatible. (Pins are used twice.)"
   #elif EXTRUDERS != 2
-    #error "PARKING_EXTRUDER requires exactly 2 EXTRUDERS."
-  #elif !PIN_EXISTS(SOL0, SOL1)
-    #error "PARKING_EXTRUDER requires SOL0_PIN and SOL1_PIN."
+    #error "(MAGNETIC_)PARKING_EXTRUDER requires exactly 2 EXTRUDERS."
   #elif !defined(PARKING_EXTRUDER_PARKING_X)
-    #error "PARKING_EXTRUDER requires PARKING_EXTRUDER_PARKING_X."
+    #error "(MAGNETIC_)PARKING_EXTRUDER requires PARKING_EXTRUDER_PARKING_X."
   #elif !defined(TOOLCHANGE_ZRAISE)
-    #error "PARKING_EXTRUDER requires TOOLCHANGE_ZRAISE."
-  #elif TOOLCHANGE_ZRAISE < 0
-    #error "TOOLCHANGE_ZRAISE must be 0 or higher."
-  #elif !defined(PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE) || !WITHIN(PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE, LOW, HIGH)
-    #error "PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE must be defined as HIGH or LOW."
-  #elif !defined(PARKING_EXTRUDER_SOLENOIDS_DELAY) || !WITHIN(PARKING_EXTRUDER_SOLENOIDS_DELAY, 0, 2000)
-    #error "PARKING_EXTRUDER_SOLENOIDS_DELAY must be between 0 and 2000 (ms)."
-  #endif
-#elif ENABLED(MAGNETIC_PARKING_EXTRUDER)
-  #if ENABLED(DUAL_X_CARRIAGE)
-    #error "MAGNETIC_PARKING_EXTRUDER and DUAL_X_CARRIAGE are incompatible."
-  #elif ENABLED(SINGLENOZZLE)
-    #error "MAGNETIC_PARKING_EXTRUDER and SINGLENOZZLE are incompatible."
-  #elif ENABLED(EXT_SOLENOID)
-    #error "MAGNETIC_PARKING_EXTRUDER and EXT_SOLENOID are incompatible. (Pins are used twice.)"
-  #elif EXTRUDERS != 2
-    #error "MAGNETIC_PARKING_EXTRUDER requires exactly 2 EXTRUDERS."
-  #elif !defined(PARKING_EXTRUDER_PARKING_X)
-    #error "MAGNETIC_PARKING_EXTRUDER requires PARKING_EXTRUDER_PARKING_X."
-  #elif !defined(TOOLCHANGE_ZRAISE)
-    #error "MAGNETIC_PARKING_EXTRUDER requires TOOLCHANGE_ZRAISE."
+    #error "(MAGNETIC_)PARKING_EXTRUDER requires TOOLCHANGE_ZRAISE."
   #elif TOOLCHANGE_ZRAISE < 0
     #error "TOOLCHANGE_ZRAISE must be 0 or higher."
+  #elif ENABLED(PARKING_EXTRUDER)
+    #if !PIN_EXISTS(SOL0, SOL1)
+      #error "PARKING_EXTRUDER requires SOL0_PIN and SOL1_PIN."
+    #elif !defined(PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE) || !WITHIN(PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE, LOW, HIGH)
+      #error "PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE must be defined as HIGH or LOW."
+    #elif !defined(PARKING_EXTRUDER_SOLENOIDS_DELAY) || !WITHIN(PARKING_EXTRUDER_SOLENOIDS_DELAY, 0, 2000)
+      #error "PARKING_EXTRUDER_SOLENOIDS_DELAY must be between 0 and 2000 (ms)."
+    #endif
   #endif
 #endif
 
@@ -884,13 +878,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
  * Switching Toolhead requirements
  */
 #if ENABLED(SWITCHING_TOOLHEAD)
-  #if ENABLED(DUAL_X_CARRIAGE)
-    #error "SWITCHING_TOOLHEAD and DUAL_X_CARRIAGE are incompatible."
-  #elif ENABLED(SINGLENOZZLE)
-    #error "SWITCHING_TOOLHEAD and SINGLENOZZLE are incompatible."
-  #elif ENABLED(PARKING_EXTRUDER)
-    #error "SWITCHING_TOOLHEAD and PARKING_EXTRUDER are incompatible."
-  #elif !defined(SWITCHING_TOOLHEAD_SERVO_NR)
+  #if !defined(SWITCHING_TOOLHEAD_SERVO_NR)
     #error "SWITCHING_TOOLHEAD requires SWITCHING_TOOLHEAD_SERVO_NR."
   #elif EXTRUDERS < 2
     #error "SWITCHING_TOOLHEAD requires at least 2 EXTRUDERS."
@@ -911,6 +899,22 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
   #endif
 #endif
 
+#if ANY(MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+  #if ENABLED(EXT_SOLENOID)
+    #error "(ELECTRO)MAGNETIC_SWITCHING_TOOLHEAD and EXT_SOLENOID are incompatible. (Pins are used twice.)"
+  #elif !PIN_EXISTS(SOL0)
+    #error "(ELECTRO)MAGNETIC_SWITCHING_TOOLHEAD requires SOL0_PIN."
+  #elif !defined(SWITCHING_TOOLHEAD_Y_POS)
+    #error "(ELECTRO)MAGNETIC_SWITCHING_TOOLHEAD requires SWITCHING_TOOLHEAD_Y_POS"
+  #elif !defined(SWITCHING_TOOLHEAD_X_POS)
+    #error "(ELECTRO)MAGNETIC_SWITCHING_TOOLHEAD requires SWITCHING_TOOLHEAD_X_POS"
+  #elif !defined(SWITCHING_TOOLHEAD_Z_HOP)
+    #error "(ELECTRO)MAGNETIC_SWITCHING_TOOLHEAD requires SWITCHING_TOOLHEAD_Z_HOP."
+  #elif !defined(SWITCHING_TOOLHEAD_Y_CLEAR)
+    #error "(ELECTRO)MAGNETIC_SWITCHING_TOOLHEAD requires SWITCHING_TOOLHEAD_Y_CLEAR."
+  #endif
+#endif
+
 /**
  * Part-Cooling Fan Multiplexer requirements
  */
@@ -1348,7 +1352,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
  * Dual X Carriage requirements
  */
 #if ENABLED(DUAL_X_CARRIAGE)
-  #if EXTRUDERS == 1
+  #if EXTRUDERS < 2
     #error "DUAL_X_CARRIAGE requires 2 (or more) extruders."
   #elif CORE_IS_XY || CORE_IS_XZ
     #error "DUAL_X_CARRIAGE cannot be used with COREXY, COREYX, COREXZ, or COREZX."
@@ -1361,7 +1365,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
   #elif X_HOME_DIR != -1 || X2_HOME_DIR != 1
     #error "DUAL_X_CARRIAGE requires X_HOME_DIR -1 and X2_HOME_DIR 1."
   #endif
-#endif // DUAL_X_CARRIAGE
+#endif
 
 /**
  * Make sure auto fan pins don't conflict with the fan pin
@@ -2286,7 +2290,7 @@ static_assert(   _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2)
 /**
  * Require soft endstops for certain setups
  */
-#if DISABLED(MIN_SOFTWARE_ENDSTOPS) || DISABLED(MAX_SOFTWARE_ENDSTOPS)
+#if !BOTH(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   #if ENABLED(DUAL_X_CARRIAGE)
     #error "DUAL_X_CARRIAGE requires both MIN_ and MAX_SOFTWARE_ENDSTOPS."
   #elif HAS_HOTEND_OFFSET
diff --git a/Marlin/src/module/tool_change.cpp b/Marlin/src/module/tool_change.cpp
index 9ab6db921..5c6d37ad9 100644
--- a/Marlin/src/module/tool_change.cpp
+++ b/Marlin/src/module/tool_change.cpp
@@ -310,7 +310,7 @@ inline void fast_line_to_current(const AxisEnum fr_axis) {
 
       // STEP 3
 
-      if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("(3) Move to position near new extruder");
+      if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("(3) Move near new extruder");
 
       current_position[X_AXIS] += active_extruder ? -10 : 10; // move 10mm away from parked extruder
 
@@ -370,8 +370,8 @@ inline void fast_line_to_current(const AxisEnum fr_axis) {
 
     constexpr uint16_t angles[2] = SWITCHING_TOOLHEAD_SERVO_ANGLES;
 
-    const float toolheadposx[] = SWITCHING_TOOLHEAD_X_POS,
-                placexpos = toolheadposx[active_extruder],
+    constexpr float toolheadposx[] = SWITCHING_TOOLHEAD_X_POS;
+    const float placexpos = toolheadposx[active_extruder],
                 grabxpos = toolheadposx[tmp_extruder];
 
     /**
@@ -465,15 +465,13 @@ inline void fast_line_to_current(const AxisEnum fr_axis) {
     if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("Toolhead change done.");
   }
 
-#endif // SWITCHING_TOOLHEAD
-
-#if ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
+#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
 
   inline void magnetic_switching_toolhead_tool_change(const uint8_t tmp_extruder, bool no_move/*=false*/) {
     if (no_move) return;
 
-    const float toolheadposx[] = SWITCHING_TOOLHEAD_X_POS,
-                placexpos = toolheadposx[active_extruder],
+    constexpr float toolheadposx[] = SWITCHING_TOOLHEAD_X_POS;
+    const float placexpos = toolheadposx[active_extruder],
                 grabxpos = toolheadposx[tmp_extruder];
 
     /**
@@ -582,7 +580,138 @@ inline void fast_line_to_current(const AxisEnum fr_axis) {
     planner.synchronize();
   }
 
-#endif // MAGNETIC_SWITCHING_TOOLHEAD
+#elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+
+  inline void est_activate_solenoid()   { OUT_WRITE(SOL0_PIN, HIGH); }
+  inline void est_deactivate_solenoid() { OUT_WRITE(SOL0_PIN, LOW); }
+  void est_init() { est_activate_solenoid(); }
+
+  inline void electromagnetic_switching_toolhead(const uint8_t tmp_extruder, bool no_move) {
+    if (no_move) return;
+
+    constexpr float toolheadposx[] = SWITCHING_TOOLHEAD_X_POS;
+    const float placexpos = toolheadposx[active_extruder],
+                grabxpos = toolheadposx[tmp_extruder];
+
+    /**
+     * 1. Raise Z-Axis to give enough clearance
+     * 2. Move to position near active extruder parking
+     * 3. Move gently to park position of active extruder
+     * 4. Disengage magnetic field, wait for delay
+     * 5. Leave extruder and move to position near new extruder parking
+     * 6. Move gently to park position of new extruder
+     * 7. Engage magnetic field for new extruder parking
+     * 8. Unpark extruder
+     * 9. Apply Z hotend offset to current position
+     */
+
+    #if ENABLED(DEBUG_LEVELING_FEATURE)
+      if (DEBUGGING(LEVELING)) DEBUG_POS("Starting Autopark", current_position);
+    #endif
+
+    // 1. Raise Z-Axis to give enough clearance
+
+    current_position[Z_AXIS] += SWITCHING_TOOLHEAD_Z_HOP;
+    #if ENABLED(DEBUG_LEVELING_FEATURE)
+      if (DEBUGGING(LEVELING)) DEBUG_POS("(1) Raise Z-Axis ", current_position);
+    #endif
+    planner.buffer_line(current_position, planner.settings.max_feedrate_mm_s[Z_AXIS], active_extruder);
+
+    // 2. Move to position near active extruder parking
+
+    #if ENABLED(DEBUG_LEVELING_FEATURE)
+      if (DEBUGGING(LEVELING)) {
+        planner.synchronize();
+        SERIAL_ECHOLNPAIR("(2) Move near active extruder parking", active_extruder);
+        DEBUG_POS("Moving ParkPos", current_position);
+      }
+    #endif
+    current_position[X_AXIS] = placexpos + hotend_offset[X_AXIS][active_extruder];
+    current_position[Y_AXIS] = SWITCHING_TOOLHEAD_Y_POS + SWITCHING_TOOLHEAD_Y_CLEAR + hotend_offset[Y_AXIS][active_extruder];
+    planner.buffer_line(current_position, planner.settings.max_feedrate_mm_s[X_AXIS], active_extruder);
+
+    // 3. Move gently to park position of active extruder
+
+    #if ENABLED(DEBUG_LEVELING_FEATURE)
+      if (DEBUGGING(LEVELING)) {
+        planner.synchronize();
+        SERIAL_ECHOLNPAIR("(3) Move gently to park position of active extruder", active_extruder);
+        DEBUG_POS("Moving ParkPos", current_position);
+      }
+    #endif
+
+    current_position[Y_AXIS] -= SWITCHING_TOOLHEAD_Y_CLEAR;
+    planner.buffer_line(current_position, planner.settings.max_feedrate_mm_s[Y_AXIS] * 0.5, active_extruder);
+
+    // 4. Disengage magnetic field, wait for delay
+
+    #if ENABLED(DEBUG_LEVELING_FEATURE)
+      if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("(4) Disengage magnet");
+    #endif
+
+    planner.synchronize();
+    est_deactivate_solenoid();
+
+    // 5. Leave extruder and move to position near new extruder parking
+
+    #if ENABLED(DEBUG_LEVELING_FEATURE)
+      if (DEBUGGING(LEVELING)) {
+        SERIAL_ECHOLNPGM("(5) Move near new extruder parking");
+        DEBUG_POS("Moving ParkPos", current_position);
+      }
+    #endif
+
+    current_position[Y_AXIS] += SWITCHING_TOOLHEAD_Y_CLEAR;
+    planner.buffer_line(current_position, planner.settings.max_feedrate_mm_s[Y_AXIS] * 0.5f, active_extruder);
+
+    current_position[X_AXIS] = grabxpos + hotend_offset[X_AXIS][active_extruder];
+    current_position[Y_AXIS] = SWITCHING_TOOLHEAD_Y_POS + SWITCHING_TOOLHEAD_Y_CLEAR  + hotend_offset[Y_AXIS][active_extruder];
+    planner.buffer_line(current_position, planner.settings.max_feedrate_mm_s[X_AXIS], active_extruder);
+
+    // 6. Move gently to park position of new extruder
+
+    #if ENABLED(DEBUG_LEVELING_FEATURE)
+      if (DEBUGGING(LEVELING)) {
+        planner.synchronize();
+        SERIAL_ECHOLNPGM("(6) Move near new extruder");
+      }
+    #endif
+
+    current_position[Y_AXIS] -= SWITCHING_TOOLHEAD_Y_CLEAR;
+    planner.buffer_line(current_position, planner.settings.max_feedrate_mm_s[Y_AXIS] * 0.5f, active_extruder);
+
+    // 7. Engage magnetic field for new extruder parking
+
+    #if ENABLED(DEBUG_LEVELING_FEATURE)
+      if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("(7) Engage magnetic field");
+    #endif
+
+    planner.synchronize();
+    est_activate_solenoid();
+
+    // 8. Unpark extruder
+
+    #if ENABLED(DEBUG_LEVELING_FEATURE)
+      if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("(8) Unpark extruder");
+    #endif
+
+    current_position[Y_AXIS] += SWITCHING_TOOLHEAD_Y_CLEAR;
+
+    planner.buffer_line(current_position, planner.settings.max_feedrate_mm_s[X_AXIS] * 0.5f, active_extruder);
+
+    // 9. Apply Z hotend offset to current position
+
+    current_position[Z_AXIS] += hotend_offset[Z_AXIS][active_extruder] - hotend_offset[Z_AXIS][tmp_extruder];
+
+    #if ENABLED(DEBUG_LEVELING_FEATURE)
+      if (DEBUGGING(LEVELING)) {
+        planner.synchronize();
+        DEBUG_POS("(9) Applying Z-offset", current_position);
+      }
+    #endif
+  }
+
+#endif // ELECTROMAGNETIC_SWITCHING_TOOLHEAD
 
 inline void invalid_extruder_error(const uint8_t e) {
   SERIAL_ECHO_START();
@@ -800,15 +929,17 @@ void tool_change(const uint8_t tmp_extruder, bool no_move/*=false*/) {
 
       #if ENABLED(DUAL_X_CARRIAGE)
         dualx_tool_change(tmp_extruder, no_move);
-      #elif ENABLED(PARKING_EXTRUDER) // Dual Parking extruder
+      #elif ENABLED(PARKING_EXTRUDER)                                   // Dual Parking extruder
         parking_extruder_tool_change(tmp_extruder, no_move);
-      #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) // Magnetic Parking extruder
+      #elif ENABLED(MAGNETIC_PARKING_EXTRUDER)                          // Magnetic Parking extruder
         magnetic_parking_extruder_tool_change(tmp_extruder);
-      #elif ENABLED(SWITCHING_TOOLHEAD) // Switching Toolhead
+      #elif ENABLED(SWITCHING_TOOLHEAD)                                 // Switching Toolhead
         switching_toolhead_tool_change(tmp_extruder, no_move);
-      #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) // Magnetic Switching Toolhead
+      #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)                        // Magnetic Switching Toolhead
         magnetic_switching_toolhead_tool_change(tmp_extruder, no_move);
-      #elif ENABLED(SWITCHING_NOZZLE) && !SWITCHING_NOZZLE_TWO_SERVOS
+      #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)                 // Magnetic Switching ToolChanger
+        electromagnetic_switching_toolhead(tmp_extruder, no_move);
+      #elif ENABLED(SWITCHING_NOZZLE) && !SWITCHING_NOZZLE_TWO_SERVOS   // Switching Nozzle (single servo)
         // Raise by a configured distance to avoid workpiece, except with
         // SWITCHING_NOZZLE_TWO_SERVOS, as both nozzles will lift instead.
         current_position[Z_AXIS] += MAX(-zdiff, 0.0) + toolchange_settings.z_raise;
diff --git a/Marlin/src/module/tool_change.h b/Marlin/src/module/tool_change.h
index 5d5503818..87be78b3a 100644
--- a/Marlin/src/module/tool_change.h
+++ b/Marlin/src/module/tool_change.h
@@ -92,6 +92,10 @@
   #endif
 #endif
 
+#if ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+  void est_init();
+#endif
+
 /**
  * Perform a tool-change, which may result in moving the
  * previous tool out of the way and the new tool into place.
diff --git a/config/default/Configuration.h b/config/default/Configuration.h
index d5072c070..87146750b 100644
--- a/config/default/Configuration.h
+++ b/config/default/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h
index 5f2a7b48c..76a27afc2 100644
--- a/config/examples/3DFabXYZ/Migbot/Configuration.h
+++ b/config/examples/3DFabXYZ/Migbot/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/AlephObjects/TAZ4/Configuration.h b/config/examples/AlephObjects/TAZ4/Configuration.h
index c92f8c45f..cf0291378 100644
--- a/config/examples/AlephObjects/TAZ4/Configuration.h
+++ b/config/examples/AlephObjects/TAZ4/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h
index bd78687bf..35d77f9fa 100644
--- a/config/examples/AliExpress/CL-260/Configuration.h
+++ b/config/examples/AliExpress/CL-260/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h
index 31d2eb289..24547ee1c 100644
--- a/config/examples/AliExpress/UM2pExt/Configuration.h
+++ b/config/examples/AliExpress/UM2pExt/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h
index 3c9d85424..2df542e06 100644
--- a/config/examples/Anet/A2/Configuration.h
+++ b/config/examples/Anet/A2/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Anet/A2plus/Configuration.h b/config/examples/Anet/A2plus/Configuration.h
index 7fbbff435..a07bb04eb 100644
--- a/config/examples/Anet/A2plus/Configuration.h
+++ b/config/examples/Anet/A2plus/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Anet/A6/Configuration.h b/config/examples/Anet/A6/Configuration.h
index 8723ce289..57f46c5f1 100644
--- a/config/examples/Anet/A6/Configuration.h
+++ b/config/examples/Anet/A6/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Anet/A8/Configuration.h b/config/examples/Anet/A8/Configuration.h
index d8fb879e0..630f9142d 100644
--- a/config/examples/Anet/A8/Configuration.h
+++ b/config/examples/Anet/A8/Configuration.h
@@ -259,7 +259,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -270,6 +279,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Anet/A8plus/Configuration.h b/config/examples/Anet/A8plus/Configuration.h
index c7386a3b0..9f30d7330 100644
--- a/config/examples/Anet/A8plus/Configuration.h
+++ b/config/examples/Anet/A8plus/Configuration.h
@@ -259,7 +259,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -270,6 +279,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Anet/E16/Configuration.h b/config/examples/Anet/E16/Configuration.h
index c6e3b5750..fbf5b9c79 100644
--- a/config/examples/Anet/E16/Configuration.h
+++ b/config/examples/Anet/E16/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/AnyCubic/i3/Configuration.h b/config/examples/AnyCubic/i3/Configuration.h
index 334780362..a931f8aef 100644
--- a/config/examples/AnyCubic/i3/Configuration.h
+++ b/config/examples/AnyCubic/i3/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/ArmEd/Configuration.h b/config/examples/ArmEd/Configuration.h
index 89c31adde..254e0cf2c 100644
--- a/config/examples/ArmEd/Configuration.h
+++ b/config/examples/ArmEd/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Azteeg/X5GT/Configuration.h b/config/examples/Azteeg/X5GT/Configuration.h
index 64ced5da8..b67f1eebd 100644
--- a/config/examples/Azteeg/X5GT/Configuration.h
+++ b/config/examples/Azteeg/X5GT/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration.h b/config/examples/BIBO/TouchX/cyclops/Configuration.h
index 10a315bc6..b18b7d183 100644
--- a/config/examples/BIBO/TouchX/cyclops/Configuration.h
+++ b/config/examples/BIBO/TouchX/cyclops/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/BIBO/TouchX/default/Configuration.h b/config/examples/BIBO/TouchX/default/Configuration.h
index 071b9e0b2..20315662e 100644
--- a/config/examples/BIBO/TouchX/default/Configuration.h
+++ b/config/examples/BIBO/TouchX/default/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/BQ/Hephestos/Configuration.h b/config/examples/BQ/Hephestos/Configuration.h
index 3c606c8b5..70a4a55a3 100644
--- a/config/examples/BQ/Hephestos/Configuration.h
+++ b/config/examples/BQ/Hephestos/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/BQ/Hephestos_2/Configuration.h b/config/examples/BQ/Hephestos_2/Configuration.h
index 5ef6db5f1..f859e4e04 100644
--- a/config/examples/BQ/Hephestos_2/Configuration.h
+++ b/config/examples/BQ/Hephestos_2/Configuration.h
@@ -266,7 +266,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -277,6 +286,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/BQ/WITBOX/Configuration.h b/config/examples/BQ/WITBOX/Configuration.h
index 8c73a702c..0ac0f9491 100644
--- a/config/examples/BQ/WITBOX/Configuration.h
+++ b/config/examples/BQ/WITBOX/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Cartesio/Configuration.h b/config/examples/Cartesio/Configuration.h
index e8f631b6c..9be1e8474 100644
--- a/config/examples/Cartesio/Configuration.h
+++ b/config/examples/Cartesio/Configuration.h
@@ -259,7 +259,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -270,6 +279,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Creality/CR-10/Configuration.h b/config/examples/Creality/CR-10/Configuration.h
index 877a18f19..358cb17e1 100644
--- a/config/examples/Creality/CR-10/Configuration.h
+++ b/config/examples/Creality/CR-10/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Creality/CR-10S/Configuration.h b/config/examples/Creality/CR-10S/Configuration.h
index 5850118f6..e7dbee1ae 100644
--- a/config/examples/Creality/CR-10S/Configuration.h
+++ b/config/examples/Creality/CR-10S/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Creality/CR-10_5S/Configuration.h b/config/examples/Creality/CR-10_5S/Configuration.h
index 66aff4642..32c2f7b3a 100644
--- a/config/examples/Creality/CR-10_5S/Configuration.h
+++ b/config/examples/Creality/CR-10_5S/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Creality/CR-10mini/Configuration.h b/config/examples/Creality/CR-10mini/Configuration.h
index 6eb84f899..fbe4b1b19 100644
--- a/config/examples/Creality/CR-10mini/Configuration.h
+++ b/config/examples/Creality/CR-10mini/Configuration.h
@@ -267,7 +267,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -278,6 +287,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Creality/CR-20 Pro/Configuration.h b/config/examples/Creality/CR-20 Pro/Configuration.h
index e20f8debc..c635c075f 100644
--- a/config/examples/Creality/CR-20 Pro/Configuration.h	
+++ b/config/examples/Creality/CR-20 Pro/Configuration.h	
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Creality/CR-20/Configuration.h b/config/examples/Creality/CR-20/Configuration.h
index 056fb3088..fb9ff5e8e 100644
--- a/config/examples/Creality/CR-20/Configuration.h
+++ b/config/examples/Creality/CR-20/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Creality/CR-8/Configuration.h b/config/examples/Creality/CR-8/Configuration.h
index a0ba761ed..a81f4604d 100644
--- a/config/examples/Creality/CR-8/Configuration.h
+++ b/config/examples/Creality/CR-8/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Creality/Ender-2/Configuration.h b/config/examples/Creality/Ender-2/Configuration.h
index 579926667..00b2ec26a 100644
--- a/config/examples/Creality/Ender-2/Configuration.h
+++ b/config/examples/Creality/Ender-2/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Creality/Ender-3/Configuration.h b/config/examples/Creality/Ender-3/Configuration.h
index 504edce56..4e22d87d1 100644
--- a/config/examples/Creality/Ender-3/Configuration.h
+++ b/config/examples/Creality/Ender-3/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Creality/Ender-4/Configuration.h b/config/examples/Creality/Ender-4/Configuration.h
index 16b2b7da1..80a9ad776 100644
--- a/config/examples/Creality/Ender-4/Configuration.h
+++ b/config/examples/Creality/Ender-4/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Creality/Ender-5/Configuration.h b/config/examples/Creality/Ender-5/Configuration.h
index 2520455da..7e3c63250 100644
--- a/config/examples/Creality/Ender-5/Configuration.h
+++ b/config/examples/Creality/Ender-5/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration.h b/config/examples/Dagoma/Disco Ultimate/Configuration.h
index 6e56e05b6..2e58ba81f 100644
--- a/config/examples/Dagoma/Disco Ultimate/Configuration.h	
+++ b/config/examples/Dagoma/Disco Ultimate/Configuration.h	
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h
index 31adecda7..2127385df 100755
--- a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h	
+++ b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h	
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Einstart-S/Configuration.h b/config/examples/Einstart-S/Configuration.h
index b1de172f7..e083805b4 100644
--- a/config/examples/Einstart-S/Configuration.h
+++ b/config/examples/Einstart-S/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Felix/Configuration.h b/config/examples/Felix/Configuration.h
index 51c504acf..5ecaadb73 100644
--- a/config/examples/Felix/Configuration.h
+++ b/config/examples/Felix/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Felix/DUAL/Configuration.h b/config/examples/Felix/DUAL/Configuration.h
index 14f08169c..d7d62565d 100644
--- a/config/examples/Felix/DUAL/Configuration.h
+++ b/config/examples/Felix/DUAL/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/FlashForge/CreatorPro/Configuration.h b/config/examples/FlashForge/CreatorPro/Configuration.h
index 91ac68b2e..e9d5833e6 100644
--- a/config/examples/FlashForge/CreatorPro/Configuration.h
+++ b/config/examples/FlashForge/CreatorPro/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/FolgerTech/i3-2020/Configuration.h b/config/examples/FolgerTech/i3-2020/Configuration.h
index 543d94cd1..f33cbef3a 100644
--- a/config/examples/FolgerTech/i3-2020/Configuration.h
+++ b/config/examples/FolgerTech/i3-2020/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Formbot/Raptor/Configuration.h b/config/examples/Formbot/Raptor/Configuration.h
index 68d7012fe..946aeedc7 100644
--- a/config/examples/Formbot/Raptor/Configuration.h
+++ b/config/examples/Formbot/Raptor/Configuration.h
@@ -299,7 +299,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -310,6 +319,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Formbot/T_Rex_2+/Configuration.h b/config/examples/Formbot/T_Rex_2+/Configuration.h
index 96d74c0fe..331aa1a8c 100644
--- a/config/examples/Formbot/T_Rex_2+/Configuration.h
+++ b/config/examples/Formbot/T_Rex_2+/Configuration.h
@@ -261,7 +261,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -272,6 +281,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Formbot/T_Rex_3/Configuration.h b/config/examples/Formbot/T_Rex_3/Configuration.h
index 675836487..128d606da 100644
--- a/config/examples/Formbot/T_Rex_3/Configuration.h
+++ b/config/examples/Formbot/T_Rex_3/Configuration.h
@@ -262,7 +262,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -273,6 +282,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Fysetc/AIO_II/Configuration.h b/config/examples/Fysetc/AIO_II/Configuration.h
index 6dd32ba73..155921f20 100644
--- a/config/examples/Fysetc/AIO_II/Configuration.h
+++ b/config/examples/Fysetc/AIO_II/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Fysetc/CHEETAH/Configuration.h b/config/examples/Fysetc/CHEETAH/Configuration.h
index 9ab0ea124..8c71da871 100644
--- a/config/examples/Fysetc/CHEETAH/Configuration.h
+++ b/config/examples/Fysetc/CHEETAH/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Fysetc/F6_13/Configuration.h b/config/examples/Fysetc/F6_13/Configuration.h
index c22bbe3d7..85007d4f2 100644
--- a/config/examples/Fysetc/F6_13/Configuration.h
+++ b/config/examples/Fysetc/F6_13/Configuration.h
@@ -260,7 +260,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -271,6 +280,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Geeetech/A10/Configuration.h b/config/examples/Geeetech/A10/Configuration.h
index 4a0d1d24d..9d2e996e5 100644
--- a/config/examples/Geeetech/A10/Configuration.h
+++ b/config/examples/Geeetech/A10/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Geeetech/A10M/Configuration.h b/config/examples/Geeetech/A10M/Configuration.h
index f5d4f24d0..97a14c553 100644
--- a/config/examples/Geeetech/A10M/Configuration.h
+++ b/config/examples/Geeetech/A10M/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Geeetech/A20M/Configuration.h b/config/examples/Geeetech/A20M/Configuration.h
index 787967eab..bac5dc600 100644
--- a/config/examples/Geeetech/A20M/Configuration.h
+++ b/config/examples/Geeetech/A20M/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Geeetech/GT2560/Configuration.h b/config/examples/Geeetech/GT2560/Configuration.h
index 5dedca746..567626943 100644
--- a/config/examples/Geeetech/GT2560/Configuration.h
+++ b/config/examples/Geeetech/GT2560/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
index e02d41d41..a82215a78 100644
--- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
+++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Geeetech/MeCreator2/Configuration.h b/config/examples/Geeetech/MeCreator2/Configuration.h
index 222eaf070..19c1f4387 100644
--- a/config/examples/Geeetech/MeCreator2/Configuration.h
+++ b/config/examples/Geeetech/MeCreator2/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
index 6acad5ce5..07cbe6888 100644
--- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h	
+++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h	
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
index 42ebb992a..e3281a660 100644
--- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h	
+++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h	
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h
index d3dbe0a69..3c3c0a097 100644
--- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h	
+++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h	
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h
index 1b3f0465a..a5dad4fac 100644
--- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h	
+++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h	
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Infitary/i3-M508/Configuration.h b/config/examples/Infitary/i3-M508/Configuration.h
index 58e4fb405..b495c5823 100644
--- a/config/examples/Infitary/i3-M508/Configuration.h
+++ b/config/examples/Infitary/i3-M508/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/JGAurora/A1/Configuration.h b/config/examples/JGAurora/A1/Configuration.h
index b3a2d861b..98e7d37f8 100644
--- a/config/examples/JGAurora/A1/Configuration.h
+++ b/config/examples/JGAurora/A1/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/JGAurora/A5/Configuration.h b/config/examples/JGAurora/A5/Configuration.h
index e4f35aa0b..46f4928d6 100644
--- a/config/examples/JGAurora/A5/Configuration.h
+++ b/config/examples/JGAurora/A5/Configuration.h
@@ -263,7 +263,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -274,6 +283,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/JGAurora/A5S/Configuration.h b/config/examples/JGAurora/A5S/Configuration.h
index d473cc12d..3dcdb0d39 100644
--- a/config/examples/JGAurora/A5S/Configuration.h
+++ b/config/examples/JGAurora/A5S/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/MakerParts/Configuration.h b/config/examples/MakerParts/Configuration.h
index 2dcfb9172..58a3838f4 100644
--- a/config/examples/MakerParts/Configuration.h
+++ b/config/examples/MakerParts/Configuration.h
@@ -278,7 +278,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -289,6 +298,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Malyan/M150/Configuration.h b/config/examples/Malyan/M150/Configuration.h
index 31a3f7f27..7f121d3f3 100644
--- a/config/examples/Malyan/M150/Configuration.h
+++ b/config/examples/Malyan/M150/Configuration.h
@@ -263,7 +263,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -274,6 +283,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Malyan/M200/Configuration.h b/config/examples/Malyan/M200/Configuration.h
index 149615a5d..d1ff509eb 100644
--- a/config/examples/Malyan/M200/Configuration.h
+++ b/config/examples/Malyan/M200/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Micromake/C1/basic/Configuration.h b/config/examples/Micromake/C1/basic/Configuration.h
index ac46bd63a..dd36127e6 100644
--- a/config/examples/Micromake/C1/basic/Configuration.h
+++ b/config/examples/Micromake/C1/basic/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Micromake/C1/enhanced/Configuration.h b/config/examples/Micromake/C1/enhanced/Configuration.h
index b930622ad..a86c0ddcc 100644
--- a/config/examples/Micromake/C1/enhanced/Configuration.h
+++ b/config/examples/Micromake/C1/enhanced/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Mks/Robin/Configuration.h b/config/examples/Mks/Robin/Configuration.h
index 4895617b2..6fc05643f 100644
--- a/config/examples/Mks/Robin/Configuration.h
+++ b/config/examples/Mks/Robin/Configuration.h
@@ -259,7 +259,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -270,6 +279,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Mks/Sbase/Configuration.h b/config/examples/Mks/Sbase/Configuration.h
index f93dc3545..f739c44b2 100644
--- a/config/examples/Mks/Sbase/Configuration.h
+++ b/config/examples/Mks/Sbase/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration.h b/config/examples/Printrbot/PrintrboardG2/Configuration.h
index 1ad91c78c..3af921567 100644
--- a/config/examples/Printrbot/PrintrboardG2/Configuration.h
+++ b/config/examples/Printrbot/PrintrboardG2/Configuration.h
@@ -259,7 +259,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -270,6 +279,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/RapideLite/RL200/Configuration.h b/config/examples/RapideLite/RL200/Configuration.h
index 675a068de..131be8fcd 100644
--- a/config/examples/RapideLite/RL200/Configuration.h
+++ b/config/examples/RapideLite/RL200/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/RepRapPro/Huxley/Configuration.h b/config/examples/RepRapPro/Huxley/Configuration.h
index 12212f8bf..2fc377d76 100644
--- a/config/examples/RepRapPro/Huxley/Configuration.h
+++ b/config/examples/RepRapPro/Huxley/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/RepRapWorld/Megatronics/Configuration.h b/config/examples/RepRapWorld/Megatronics/Configuration.h
index 2fd954ccf..c621253a4 100644
--- a/config/examples/RepRapWorld/Megatronics/Configuration.h
+++ b/config/examples/RepRapWorld/Megatronics/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/RigidBot/Configuration.h b/config/examples/RigidBot/Configuration.h
index 551314076..dad1fe9c8 100644
--- a/config/examples/RigidBot/Configuration.h
+++ b/config/examples/RigidBot/Configuration.h
@@ -261,7 +261,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -272,6 +281,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/SCARA/Configuration.h b/config/examples/SCARA/Configuration.h
index b6ef81087..ad7cdb447 100644
--- a/config/examples/SCARA/Configuration.h
+++ b/config/examples/SCARA/Configuration.h
@@ -289,7 +289,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -300,6 +309,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration.h b/config/examples/STM32/Black_STM32F407VET6/Configuration.h
index cb60be3bd..f4fc9aa93 100644
--- a/config/examples/STM32/Black_STM32F407VET6/Configuration.h
+++ b/config/examples/STM32/Black_STM32F407VET6/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/STM32/STM32F10/Configuration.h b/config/examples/STM32/STM32F10/Configuration.h
index 5427a24a3..a0012d471 100644
--- a/config/examples/STM32/STM32F10/Configuration.h
+++ b/config/examples/STM32/STM32F10/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/STM32/STM32F4/Configuration.h b/config/examples/STM32/STM32F4/Configuration.h
index 1eb78788b..718e41e86 100644
--- a/config/examples/STM32/STM32F4/Configuration.h
+++ b/config/examples/STM32/STM32F4/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/STM32/stm32f103ret6/Configuration.h b/config/examples/STM32/stm32f103ret6/Configuration.h
index 0cb48a423..2078e53f5 100644
--- a/config/examples/STM32/stm32f103ret6/Configuration.h
+++ b/config/examples/STM32/stm32f103ret6/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Sanguinololu/Configuration.h b/config/examples/Sanguinololu/Configuration.h
index c13f43e5d..2f66ba246 100644
--- a/config/examples/Sanguinololu/Configuration.h
+++ b/config/examples/Sanguinololu/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Tevo/Tarantula Pro/Configuration.h b/config/examples/Tevo/Tarantula Pro/Configuration.h
index 6dde8660c..f102c100a 100644
--- a/config/examples/Tevo/Tarantula Pro/Configuration.h	
+++ b/config/examples/Tevo/Tarantula Pro/Configuration.h	
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/TheBorg/Configuration.h b/config/examples/TheBorg/Configuration.h
index 6d069b415..d90f111b4 100644
--- a/config/examples/TheBorg/Configuration.h
+++ b/config/examples/TheBorg/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/TinyBoy2/Configuration.h b/config/examples/TinyBoy2/Configuration.h
index b76539122..868a2fe4d 100644
--- a/config/examples/TinyBoy2/Configuration.h
+++ b/config/examples/TinyBoy2/Configuration.h
@@ -280,7 +280,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -291,6 +300,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Tronxy/X1/Configuration.h b/config/examples/Tronxy/X1/Configuration.h
index 119b62b77..664f077a6 100644
--- a/config/examples/Tronxy/X1/Configuration.h
+++ b/config/examples/Tronxy/X1/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Tronxy/X3A/Configuration.h b/config/examples/Tronxy/X3A/Configuration.h
index 9cd483e19..a30409963 100644
--- a/config/examples/Tronxy/X3A/Configuration.h
+++ b/config/examples/Tronxy/X3A/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Tronxy/X5S-2E/Configuration.h b/config/examples/Tronxy/X5S-2E/Configuration.h
index 2c8546521..a78205324 100644
--- a/config/examples/Tronxy/X5S-2E/Configuration.h
+++ b/config/examples/Tronxy/X5S-2E/Configuration.h
@@ -260,7 +260,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -271,6 +280,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Tronxy/X5S/Configuration.h b/config/examples/Tronxy/X5S/Configuration.h
index 9ef1ad269..24a16a004 100644
--- a/config/examples/Tronxy/X5S/Configuration.h
+++ b/config/examples/Tronxy/X5S/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Tronxy/XY100/Configuration.h b/config/examples/Tronxy/XY100/Configuration.h
index 34f0fdfa1..4458f6e8a 100644
--- a/config/examples/Tronxy/XY100/Configuration.h
+++ b/config/examples/Tronxy/XY100/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/UltiMachine/Archim1/Configuration.h b/config/examples/UltiMachine/Archim1/Configuration.h
index 262acdc5d..c9a0e4f61 100644
--- a/config/examples/UltiMachine/Archim1/Configuration.h
+++ b/config/examples/UltiMachine/Archim1/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/UltiMachine/Archim2/Configuration.h b/config/examples/UltiMachine/Archim2/Configuration.h
index 8eaa3f39a..b8d16958c 100644
--- a/config/examples/UltiMachine/Archim2/Configuration.h
+++ b/config/examples/UltiMachine/Archim2/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/VORONDesign/Configuration.h b/config/examples/VORONDesign/Configuration.h
index efc96688d..b5b6f6bb6 100644
--- a/config/examples/VORONDesign/Configuration.h
+++ b/config/examples/VORONDesign/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Velleman/K8200/Configuration.h b/config/examples/Velleman/K8200/Configuration.h
index 38c7f5921..80ffc8307 100644
--- a/config/examples/Velleman/K8200/Configuration.h
+++ b/config/examples/Velleman/K8200/Configuration.h
@@ -278,7 +278,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -289,6 +298,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Velleman/K8400/Configuration.h b/config/examples/Velleman/K8400/Configuration.h
index 97f8794f9..cd61a6d2c 100644
--- a/config/examples/Velleman/K8400/Configuration.h
+++ b/config/examples/Velleman/K8400/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration.h b/config/examples/Velleman/K8400/Dual-head/Configuration.h
index 95321280c..fd730158a 100644
--- a/config/examples/Velleman/K8400/Dual-head/Configuration.h
+++ b/config/examples/Velleman/K8400/Dual-head/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/WASP/PowerWASP/Configuration.h b/config/examples/WASP/PowerWASP/Configuration.h
index 49a126dd3..5969076fc 100644
--- a/config/examples/WASP/PowerWASP/Configuration.h
+++ b/config/examples/WASP/PowerWASP/Configuration.h
@@ -277,7 +277,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -288,6 +297,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/Wanhao/Duplicator 6/Configuration.h b/config/examples/Wanhao/Duplicator 6/Configuration.h
index e650f44db..04b2c2396 100644
--- a/config/examples/Wanhao/Duplicator 6/Configuration.h	
+++ b/config/examples/Wanhao/Duplicator 6/Configuration.h	
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/adafruit/ST7565/Configuration.h b/config/examples/adafruit/ST7565/Configuration.h
index c12208213..34be2875d 100644
--- a/config/examples/adafruit/ST7565/Configuration.h
+++ b/config/examples/adafruit/ST7565/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/delta/Anycubic/Kossel/Configuration.h b/config/examples/delta/Anycubic/Kossel/Configuration.h
index f1196c57f..535ed74a6 100644
--- a/config/examples/delta/Anycubic/Kossel/Configuration.h
+++ b/config/examples/delta/Anycubic/Kossel/Configuration.h
@@ -273,7 +273,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -284,6 +293,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
index 92fc1c4ca..c889bb4b8 100644
--- a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
+++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/delta/FLSUN/kossel/Configuration.h b/config/examples/delta/FLSUN/kossel/Configuration.h
index 105e5a64c..1f4f347e7 100644
--- a/config/examples/delta/FLSUN/kossel/Configuration.h
+++ b/config/examples/delta/FLSUN/kossel/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/config/examples/delta/FLSUN/kossel_mini/Configuration.h
index aae89384e..6304993e6 100644
--- a/config/examples/delta/FLSUN/kossel_mini/Configuration.h
+++ b/config/examples/delta/FLSUN/kossel_mini/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration.h b/config/examples/delta/Geeetech/Rostock 301/Configuration.h
index a2474f1d8..ae0e194a1 100644
--- a/config/examples/delta/Geeetech/Rostock 301/Configuration.h	
+++ b/config/examples/delta/Geeetech/Rostock 301/Configuration.h	
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration.h b/config/examples/delta/Hatchbox_Alpha/Configuration.h
index 4920e8503..23e595630 100644
--- a/config/examples/delta/Hatchbox_Alpha/Configuration.h
+++ b/config/examples/delta/Hatchbox_Alpha/Configuration.h
@@ -263,7 +263,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -274,6 +283,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/delta/MKS/SBASE/Configuration.h b/config/examples/delta/MKS/SBASE/Configuration.h
index fda81e964..79cfebbe1 100644
--- a/config/examples/delta/MKS/SBASE/Configuration.h
+++ b/config/examples/delta/MKS/SBASE/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/delta/Tevo Little Monster/Configuration.h b/config/examples/delta/Tevo Little Monster/Configuration.h
index ae432c0d2..74f45c70f 100644
--- a/config/examples/delta/Tevo Little Monster/Configuration.h	
+++ b/config/examples/delta/Tevo Little Monster/Configuration.h	
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/delta/generic/Configuration.h b/config/examples/delta/generic/Configuration.h
index 5ca059c77..3aff0ccdd 100644
--- a/config/examples/delta/generic/Configuration.h
+++ b/config/examples/delta/generic/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/delta/kossel_mini/Configuration.h b/config/examples/delta/kossel_mini/Configuration.h
index f87a7df17..f316cb43f 100644
--- a/config/examples/delta/kossel_mini/Configuration.h
+++ b/config/examples/delta/kossel_mini/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/delta/kossel_pro/Configuration.h b/config/examples/delta/kossel_pro/Configuration.h
index 562396041..0b4f4a188 100644
--- a/config/examples/delta/kossel_pro/Configuration.h
+++ b/config/examples/delta/kossel_pro/Configuration.h
@@ -262,7 +262,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -273,6 +282,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/delta/kossel_xl/Configuration.h b/config/examples/delta/kossel_xl/Configuration.h
index 148395e29..b33e3924d 100644
--- a/config/examples/delta/kossel_xl/Configuration.h
+++ b/config/examples/delta/kossel_xl/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/gCreate/gMax1.5+/Configuration.h b/config/examples/gCreate/gMax1.5+/Configuration.h
index 7bf6a55b5..6d872909b 100644
--- a/config/examples/gCreate/gMax1.5+/Configuration.h
+++ b/config/examples/gCreate/gMax1.5+/Configuration.h
@@ -263,7 +263,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -274,6 +283,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/makibox/Configuration.h b/config/examples/makibox/Configuration.h
index 4866a96b9..6148b640c 100644
--- a/config/examples/makibox/Configuration.h
+++ b/config/examples/makibox/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/tvrrug/Round2/Configuration.h b/config/examples/tvrrug/Round2/Configuration.h
index bfd1ef616..80308e6eb 100644
--- a/config/examples/tvrrug/Round2/Configuration.h
+++ b/config/examples/tvrrug/Round2/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif
 
diff --git a/config/examples/wt150/Configuration.h b/config/examples/wt150/Configuration.h
index 9709bf369..46e5458cd 100644
--- a/config/examples/wt150/Configuration.h
+++ b/config/examples/wt150/Configuration.h
@@ -258,7 +258,16 @@
  */
 //#define MAGNETIC_SWITCHING_TOOLHEAD
 
-#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
+/**
+ * Electromagnetic Switching Toolhead
+ *
+ * Parking for CoreXY / HBot kinematics.
+ * Toolheads are parked at one edge and held with an electromagnet.
+ * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
+ */
+//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
+
+#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
   #define SWITCHING_TOOLHEAD_Y_POS          235         // (mm) Y position of the toolhead dock
   #define SWITCHING_TOOLHEAD_Y_SECURITY      10         // (mm) Security distance Y axis
   #define SWITCHING_TOOLHEAD_Y_CLEAR         60         // (mm) Minimum distance from dock for unobstructed X axis
@@ -269,6 +278,8 @@
   #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
     #define SWITCHING_TOOLHEAD_Y_RELEASE      5         // (mm) Security distance Y axis
     #define SWITCHING_TOOLHEAD_X_SECURITY   -35         // (mm) Security distance X axis
+  #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
+    #define SWITCHING_TOOLHEAD_Z_HOP          2         // (mm) Z raise for switching
   #endif
 #endif