From 31eb487da5778f653c771331bcef6b57e3511404 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Fri, 22 May 2020 02:02:03 -0500 Subject: [PATCH] whitespace --- Marlin/Configuration_adv.h | 2 +- Marlin/src/feature/direct_stepping.cpp | 2 +- Marlin/src/module/temperature.cpp | 2 +- Marlin/src/pins/ramps/pins_RAMPS_CREALITY.h | 3 +-- Marlin/src/pins/ramps/pins_TRIGORILLA_14.h | 4 ++-- Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_V1_1.h | 4 ++-- 6 files changed, 8 insertions(+), 9 deletions(-) diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index db89a1d5e..22755f812 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -47,7 +47,7 @@ * is reported. This allows us to ignore intermittent error conditions while * still detecting an actual failure, which should result in a continuous * stream of errors from the sensor. - * + * * Set this value to 0 to fail on the first error to occur. */ #define THERMOCOUPLE_MAX_ERRORS 15 diff --git a/Marlin/src/feature/direct_stepping.cpp b/Marlin/src/feature/direct_stepping.cpp index 7bed075b8..76dfac7de 100644 --- a/Marlin/src/feature/direct_stepping.cpp +++ b/Marlin/src/feature/direct_stepping.cpp @@ -61,7 +61,7 @@ namespace DirectStepping { template uint8_t SerialPageManager::pages[Cfg::NUM_PAGES][Cfg::PAGE_SIZE]; - + template uint8_t SerialPageManager::checksum; diff --git a/Marlin/src/module/temperature.cpp b/Marlin/src/module/temperature.cpp index 0b073bc16..6121a5a0a 100644 --- a/Marlin/src/module/temperature.cpp +++ b/Marlin/src/module/temperature.cpp @@ -2075,7 +2075,7 @@ void Temperature::disable_all_heaters() { // Needed to return the correct temp when this is called too soon static uint16_t max6675_temp_previous[COUNT_6675] = { 0 }; #endif - + static uint8_t max6675_errors[COUNT_6675] = { 0 }; #define MAX6675_HEAT_INTERVAL 250UL diff --git a/Marlin/src/pins/ramps/pins_RAMPS_CREALITY.h b/Marlin/src/pins/ramps/pins_RAMPS_CREALITY.h index dd4cb4ea0..601edc83d 100644 --- a/Marlin/src/pins/ramps/pins_RAMPS_CREALITY.h +++ b/Marlin/src/pins/ramps/pins_RAMPS_CREALITY.h @@ -47,7 +47,6 @@ #define PS_ON_PIN 40 // Used by CR2020 Industrial series #endif - #if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN) #define CASE_LIGHT_PIN 65 #endif @@ -65,5 +64,5 @@ #define SUICIDE_PIN 12 // Used by CR2020 Industrial series #ifndef SUICIDE_PIN_INVERTING - #define SUICIDE_PIN_INVERTING true + #define SUICIDE_PIN_INVERTING true #endif diff --git a/Marlin/src/pins/ramps/pins_TRIGORILLA_14.h b/Marlin/src/pins/ramps/pins_TRIGORILLA_14.h index cfb9acb05..a512aa835 100644 --- a/Marlin/src/pins/ramps/pins_TRIGORILLA_14.h +++ b/Marlin/src/pins/ramps/pins_TRIGORILLA_14.h @@ -59,7 +59,7 @@ #define RAMPS_D10_PIN TG_HEATER_0_PIN // HEATER_0_PIN is always RAMPS_D10_PIN in pins_RAMPS.h -#if HAS_MULTI_HOTEND // EEF and EEB +#if HAS_MULTI_HOTEND // EEF and EEB #define RAMPS_D9_PIN TG_HEATER_1_PIN #if !TEMP_SENSOR_BED // EEF @@ -79,7 +79,7 @@ #define RAMPS_D8_PIN TG_FAN0_PIN #endif -#if HAS_MULTI_HOTEND || TEMP_SENSOR_BED // EEF, EEB, EFB +#if HAS_MULTI_HOTEND || TEMP_SENSOR_BED // EEF, EEB, EFB #define FAN1_PIN TG_FAN1_PIN #endif #define FAN2_PIN TG_FAN2_PIN diff --git a/Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_V1_1.h b/Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_V1_1.h index 3df81a784..ba1ea0879 100644 --- a/Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_V1_1.h +++ b/Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_V1_1.h @@ -352,8 +352,8 @@ * ￣￣ * W1 */ -#define ESP_WIFI_MODULE_COM 6 // Must also set either SERIAL_PORT or SERIAL_PORT_2 to this -#define ESP_WIFI_MODULE_BAUDRATE BAUDRATE // Must use same BAUDRATE as SERIAL_PORT & SERIAL_PORT_2 +#define ESP_WIFI_MODULE_COM 6 // Must also set either SERIAL_PORT or SERIAL_PORT_2 to this +#define ESP_WIFI_MODULE_BAUDRATE BAUDRATE // Must use same BAUDRATE as SERIAL_PORT & SERIAL_PORT_2 #define ESP_WIFI_MODULE_RESET_PIN PG0 #define ESP_WIFI_MODULE_ENABLE_PIN PG1 #define ESP_WIFI_MODULE_GPIO0_PIN PF14