Detab some HAL files
This commit is contained in:
parent
1c41de16d4
commit
3319765034
2 changed files with 62 additions and 62 deletions
|
@ -89,25 +89,25 @@ void HardwareSerial::begin(uint32_t baudrate) {
|
||||||
PINSEL_ConfigPin(&PinCfg);
|
PINSEL_ConfigPin(&PinCfg);
|
||||||
}
|
}
|
||||||
|
|
||||||
/* Initialize UART Configuration parameter structure to default state:
|
/* Initialize UART Configuration parameter structure to default state:
|
||||||
* Baudrate = 9600bps
|
* Baudrate = 9600bps
|
||||||
* 8 data bit
|
* 8 data bit
|
||||||
* 1 Stop bit
|
* 1 Stop bit
|
||||||
* None parity
|
* None parity
|
||||||
*/
|
*/
|
||||||
UART_ConfigStructInit(&UARTConfigStruct);
|
UART_ConfigStructInit(&UARTConfigStruct);
|
||||||
|
|
||||||
// Re-configure baudrate
|
// Re-configure baudrate
|
||||||
UARTConfigStruct.Baud_rate = baudrate;
|
UARTConfigStruct.Baud_rate = baudrate;
|
||||||
|
|
||||||
// Initialize eripheral with given to corresponding parameter
|
// Initialize eripheral with given to corresponding parameter
|
||||||
UART_Init(UARTx, &UARTConfigStruct);
|
UART_Init(UARTx, &UARTConfigStruct);
|
||||||
|
|
||||||
// Enable and reset the TX and RX FIFOs
|
// Enable and reset the TX and RX FIFOs
|
||||||
UART_FIFOConfigStructInit(&FIFOConfig);
|
UART_FIFOConfigStructInit(&FIFOConfig);
|
||||||
UART_FIFOConfig(UARTx, &FIFOConfig);
|
UART_FIFOConfig(UARTx, &FIFOConfig);
|
||||||
|
|
||||||
// Enable UART Transmit
|
// Enable UART Transmit
|
||||||
UART_TxCmd(UARTx, ENABLE);
|
UART_TxCmd(UARTx, ENABLE);
|
||||||
|
|
||||||
// Configure Interrupts
|
// Configure Interrupts
|
||||||
|
@ -234,9 +234,9 @@ void HardwareSerial::IRQHandler() {
|
||||||
uint8_t LSRValue, byte;
|
uint8_t LSRValue, byte;
|
||||||
|
|
||||||
IIRValue = UART_GetIntId(UARTx);
|
IIRValue = UART_GetIntId(UARTx);
|
||||||
IIRValue &= UART_IIR_INTID_MASK; /* check bit 1~3, interrupt identification */
|
IIRValue &= UART_IIR_INTID_MASK; /* check bit 1~3, interrupt identification */
|
||||||
|
|
||||||
if ( IIRValue == UART_IIR_INTID_RLS ) /* Receive Line Status */
|
if ( IIRValue == UART_IIR_INTID_RLS ) /* Receive Line Status */
|
||||||
{
|
{
|
||||||
LSRValue = UART_GetLineStatus(UARTx);
|
LSRValue = UART_GetLineStatus(UARTx);
|
||||||
|
|
||||||
|
@ -246,13 +246,13 @@ void HardwareSerial::IRQHandler() {
|
||||||
/* There are errors or break interrupt */
|
/* There are errors or break interrupt */
|
||||||
/* Read LSR will clear the interrupt */
|
/* Read LSR will clear the interrupt */
|
||||||
Status = LSRValue;
|
Status = LSRValue;
|
||||||
byte = UART_ReceiveByte(UARTx); /* Dummy read on RX to clear
|
byte = UART_ReceiveByte(UARTx); /* Dummy read on RX to clear
|
||||||
interrupt, then bail out */
|
interrupt, then bail out */
|
||||||
return;
|
return;
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
if ( IIRValue == UART_IIR_INTID_RDA ) /* Receive Data Available */
|
if ( IIRValue == UART_IIR_INTID_RDA ) /* Receive Data Available */
|
||||||
{
|
{
|
||||||
/* Clear the FIFO */
|
/* Clear the FIFO */
|
||||||
while ( UART_Receive(UARTx, &byte, 1, NONE_BLOCKING) ) {
|
while ( UART_Receive(UARTx, &byte, 1, NONE_BLOCKING) ) {
|
||||||
|
@ -265,10 +265,10 @@ void HardwareSerial::IRQHandler() {
|
||||||
break;
|
break;
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
else if ( IIRValue == UART_IIR_INTID_CTI ) /* Character timeout indicator */
|
else if ( IIRValue == UART_IIR_INTID_CTI ) /* Character timeout indicator */
|
||||||
{
|
{
|
||||||
/* Character Time-out indicator */
|
/* Character Time-out indicator */
|
||||||
Status |= 0x100; /* Bit 9 as the CTI error */
|
Status |= 0x100; /* Bit 9 as the CTI error */
|
||||||
}
|
}
|
||||||
|
|
||||||
#if TX_BUFFER_SIZE > 0
|
#if TX_BUFFER_SIZE > 0
|
||||||
|
@ -302,12 +302,12 @@ extern "C" {
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
/*****************************************************************************
|
/*****************************************************************************
|
||||||
** Function name: UART0_IRQHandler
|
** Function name: UART0_IRQHandler
|
||||||
**
|
**
|
||||||
** Descriptions: UART0 interrupt handler
|
** Descriptions: UART0 interrupt handler
|
||||||
**
|
**
|
||||||
** parameters: None
|
** parameters: None
|
||||||
** Returned value: None
|
** Returned value: None
|
||||||
**
|
**
|
||||||
*****************************************************************************/
|
*****************************************************************************/
|
||||||
void UART0_IRQHandler (void)
|
void UART0_IRQHandler (void)
|
||||||
|
@ -316,12 +316,12 @@ void UART0_IRQHandler (void)
|
||||||
}
|
}
|
||||||
|
|
||||||
/*****************************************************************************
|
/*****************************************************************************
|
||||||
** Function name: UART1_IRQHandler
|
** Function name: UART1_IRQHandler
|
||||||
**
|
**
|
||||||
** Descriptions: UART1 interrupt handler
|
** Descriptions: UART1 interrupt handler
|
||||||
**
|
**
|
||||||
** parameters: None
|
** parameters: None
|
||||||
** Returned value: None
|
** Returned value: None
|
||||||
**
|
**
|
||||||
*****************************************************************************/
|
*****************************************************************************/
|
||||||
void UART1_IRQHandler (void)
|
void UART1_IRQHandler (void)
|
||||||
|
@ -330,12 +330,12 @@ void UART1_IRQHandler (void)
|
||||||
}
|
}
|
||||||
|
|
||||||
/*****************************************************************************
|
/*****************************************************************************
|
||||||
** Function name: UART2_IRQHandler
|
** Function name: UART2_IRQHandler
|
||||||
**
|
**
|
||||||
** Descriptions: UART2 interrupt handler
|
** Descriptions: UART2 interrupt handler
|
||||||
**
|
**
|
||||||
** parameters: None
|
** parameters: None
|
||||||
** Returned value: None
|
** Returned value: None
|
||||||
**
|
**
|
||||||
*****************************************************************************/
|
*****************************************************************************/
|
||||||
void UART2_IRQHandler (void)
|
void UART2_IRQHandler (void)
|
||||||
|
@ -344,12 +344,12 @@ void UART2_IRQHandler (void)
|
||||||
}
|
}
|
||||||
|
|
||||||
/*****************************************************************************
|
/*****************************************************************************
|
||||||
** Function name: UART3_IRQHandler
|
** Function name: UART3_IRQHandler
|
||||||
**
|
**
|
||||||
** Descriptions: UART3 interrupt handler
|
** Descriptions: UART3 interrupt handler
|
||||||
**
|
**
|
||||||
** parameters: None
|
** parameters: None
|
||||||
** Returned value: None
|
** Returned value: None
|
||||||
**
|
**
|
||||||
*****************************************************************************/
|
*****************************************************************************/
|
||||||
void UART3_IRQHandler (void)
|
void UART3_IRQHandler (void)
|
||||||
|
|
|
@ -49,45 +49,45 @@ namespace PersistentStore {
|
||||||
char HAL_STM32F1_eeprom_content[HAL_STM32F1_EEPROM_SIZE];
|
char HAL_STM32F1_eeprom_content[HAL_STM32F1_EEPROM_SIZE];
|
||||||
|
|
||||||
bool access_start() {
|
bool access_start() {
|
||||||
if (!card.cardOK) return false;
|
if (!card.cardOK) return false;
|
||||||
int16_t bytes_read = 0;
|
int16_t bytes_read = 0;
|
||||||
const char eeprom_zero = 0xFF;
|
const char eeprom_zero = 0xFF;
|
||||||
card.openFile((char *)CONFIG_FILE_NAME,true);
|
card.openFile((char *)CONFIG_FILE_NAME,true);
|
||||||
bytes_read = card.read (HAL_STM32F1_eeprom_content, HAL_STM32F1_EEPROM_SIZE);
|
bytes_read = card.read (HAL_STM32F1_eeprom_content, HAL_STM32F1_EEPROM_SIZE);
|
||||||
if (bytes_read == -1) return false;
|
if (bytes_read == -1) return false;
|
||||||
for (; bytes_read < HAL_STM32F1_EEPROM_SIZE; bytes_read++) {
|
for (; bytes_read < HAL_STM32F1_EEPROM_SIZE; bytes_read++) {
|
||||||
HAL_STM32F1_eeprom_content[bytes_read] = eeprom_zero;
|
HAL_STM32F1_eeprom_content[bytes_read] = eeprom_zero;
|
||||||
}
|
}
|
||||||
card.closefile();
|
card.closefile();
|
||||||
return true;
|
return true;
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
||||||
bool access_finish(){
|
bool access_finish(){
|
||||||
if (!card.cardOK) return false;
|
if (!card.cardOK) return false;
|
||||||
int16_t bytes_written = 0;
|
int16_t bytes_written = 0;
|
||||||
card.openFile((char *)CONFIG_FILE_NAME,true);
|
card.openFile((char *)CONFIG_FILE_NAME,true);
|
||||||
bytes_written = card.write (HAL_STM32F1_eeprom_content, HAL_STM32F1_EEPROM_SIZE);
|
bytes_written = card.write (HAL_STM32F1_eeprom_content, HAL_STM32F1_EEPROM_SIZE);
|
||||||
card.closefile();
|
card.closefile();
|
||||||
return (bytes_written == HAL_STM32F1_EEPROM_SIZE);
|
return (bytes_written == HAL_STM32F1_EEPROM_SIZE);
|
||||||
}
|
}
|
||||||
|
|
||||||
bool write_data(int &pos, const uint8_t *value, uint16_t size, uint16_t *crc) {
|
bool write_data(int &pos, const uint8_t *value, uint16_t size, uint16_t *crc) {
|
||||||
for (int i = 0; i < size; i++) {
|
for (int i = 0; i < size; i++) {
|
||||||
HAL_STM32F1_eeprom_content [pos + i] = value[i];
|
HAL_STM32F1_eeprom_content [pos + i] = value[i];
|
||||||
}
|
}
|
||||||
crc16(crc, value, size);
|
crc16(crc, value, size);
|
||||||
pos += size;
|
pos += size;
|
||||||
return false;
|
return false;
|
||||||
}
|
}
|
||||||
|
|
||||||
bool read_data(int &pos, uint8_t* value, uint16_t size, uint16_t *crc) {
|
bool read_data(int &pos, uint8_t* value, uint16_t size, uint16_t *crc) {
|
||||||
for (int i = 0; i < size; i++) {
|
for (int i = 0; i < size; i++) {
|
||||||
value[i] = HAL_STM32F1_eeprom_content [pos + i];
|
value[i] = HAL_STM32F1_eeprom_content [pos + i];
|
||||||
}
|
}
|
||||||
crc16(crc, value, size);
|
crc16(crc, value, size);
|
||||||
pos += size;
|
pos += size;
|
||||||
return false;
|
return false;
|
||||||
}
|
}
|
||||||
|
|
||||||
} // PersistentStore::
|
} // PersistentStore::
|
||||||
|
|
Reference in a new issue