Probe bounds based on bed size

Marlin/Configuration.h

@@ -926,15 +926,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 

Marlin/src/config/default/Configuration.h

@@ -926,15 +926,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 

Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h

@@ -946,15 +946,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 

Marlin/src/config/examples/AliExpress/CL-260/Configuration.h

@@ -926,15 +926,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 

Marlin/src/config/examples/Anet/A6/Configuration.h

@@ -1038,9 +1038,9 @@
 
   // Set the boundaries for probing (where the probe can reach).
   //#define LEFT_PROBE_BED_POSITION 15
-  //#define RIGHT_PROBE_BED_POSITION 170
+  //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
-  //#define FRONT_PROBE_BED_POSITION 20
+  //#define FRONT_PROBE_BED_POSITION 15
-  //#define BACK_PROBE_BED_POSITION 170
+  //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
 
   // ANET A6
   //#define LEFT_PROBE_BED_POSITION 20

Marlin/src/config/examples/Anet/A8/Configuration.h

@@ -933,15 +933,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 190
-  #define FRONT_PROBE_BED_POSITION 15
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 

Marlin/src/config/examples/Azteeg/X5GT/Configuration.h

@@ -926,15 +926,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 

Marlin/src/config/examples/BQ/Hephestos/Configuration.h

@@ -914,15 +914,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 

Marlin/src/config/examples/BQ/WITBOX/Configuration.h

@@ -914,15 +914,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 

Marlin/src/config/examples/Cartesio/Configuration.h

@@ -925,15 +925,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 

Marlin/src/config/examples/Creality/CR-10/Configuration.h

@@ -936,15 +936,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 

Marlin/src/config/examples/Creality/CR-10S/Configuration.h

@@ -918,15 +918,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 

Marlin/src/config/examples/Creality/Ender/Configuration.h

@@ -921,15 +921,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 

Marlin/src/config/examples/Felix/Configuration.h

@@ -908,15 +908,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 180
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 

Marlin/src/config/examples/Felix/DUAL/Configuration.h

@@ -908,15 +908,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 180
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 

Marlin/src/config/examples/Geeetech/GT2560/Configuration.h

@@ -941,15 +941,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 

Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h

@@ -926,15 +926,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 8
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 

Marlin/src/config/examples/Infitary/i3-M508/Configuration.h

@@ -930,15 +930,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 

Marlin/src/config/examples/MakerParts/Configuration.h

@@ -933,15 +933,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 

Marlin/src/config/examples/Malyan/M200/Configuration.h

@@ -916,15 +916,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 

Marlin/src/config/examples/Micromake/C1/basic/Configuration.h

@@ -930,15 +930,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 

Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h

@@ -930,15 +930,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 

Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h

@@ -926,15 +926,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 

Marlin/src/config/examples/RigidBot/Configuration.h

@@ -924,15 +924,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 

Marlin/src/config/examples/SCARA/Configuration.h

@@ -938,15 +938,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 

Marlin/src/config/examples/STM32F10/Configuration.h

@@ -929,15 +929,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 

Marlin/src/config/examples/Sanguinololu/Configuration.h

@@ -957,15 +957,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 

Marlin/src/config/examples/TinyBoy2/Configuration.h

@@ -982,15 +982,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 

Marlin/src/config/examples/Tronxy/X1/Configuration.h

@@ -917,15 +917,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 

Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h

@@ -917,15 +917,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 

Marlin/src/config/examples/Velleman/K8200/Configuration.h

@@ -956,15 +956,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 

Marlin/src/config/examples/Velleman/K8400/Configuration.h

@@ -926,15 +926,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 

Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h

@@ -926,15 +926,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 

Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h

@@ -927,15 +927,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 

Marlin/src/config/examples/adafruit/ST7565/Configuration.h

@@ -926,15 +926,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 

Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h

@@ -1057,6 +1057,9 @@
   #define GRID_MAX_POINTS_X 7
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  // The Z probe minimum outer margin (to validate G29 parameters).
+  #define MIN_PROBE_EDGE 20
+
   // Set the boundaries for probing (where the probe can reach).
   #define DELTA_PROBEABLE_RADIUS (DELTA_PRINTABLE_RADIUS - 15)
   #define LEFT_PROBE_BED_POSITION -(DELTA_PROBEABLE_RADIUS)
@@ -1064,9 +1067,6 @@
   #define FRONT_PROBE_BED_POSITION -(DELTA_PROBEABLE_RADIUS)
   #define BACK_PROBE_BED_POSITION DELTA_PROBEABLE_RADIUS
 
-  // The Z probe minimum outer margin (to validate G29 parameters).
-  #define MIN_PROBE_EDGE 20
-
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 

Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h

@@ -1048,6 +1048,9 @@
   #define GRID_MAX_POINTS_X 7
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  // The Z probe minimum outer margin (to validate G29 parameters).
+  #define MIN_PROBE_EDGE 20
+
   // Set the boundaries for probing (where the probe can reach).
   #define DELTA_PROBEABLE_RADIUS (DELTA_PRINTABLE_RADIUS - 15)
   #define LEFT_PROBE_BED_POSITION -(DELTA_PROBEABLE_RADIUS)
@@ -1055,9 +1058,6 @@
   #define FRONT_PROBE_BED_POSITION -(DELTA_PROBEABLE_RADIUS)
   #define BACK_PROBE_BED_POSITION DELTA_PROBEABLE_RADIUS
 
-  // The Z probe minimum outer margin (to validate G29 parameters).
-  #define MIN_PROBE_EDGE 20
-
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 

Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h

@@ -1056,6 +1056,9 @@
   #define GRID_MAX_POINTS_X 9
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  // The Z probe minimum outer margin (to validate G29 parameters).
+  #define MIN_PROBE_EDGE 10
+
   // Set the boundaries for probing (where the probe can reach).
   #define DELTA_PROBEABLE_RADIUS (DELTA_PRINTABLE_RADIUS - 15)
   #define LEFT_PROBE_BED_POSITION -(DELTA_PROBEABLE_RADIUS)
@@ -1063,9 +1066,6 @@
   #define FRONT_PROBE_BED_POSITION -(DELTA_PROBEABLE_RADIUS)
   #define BACK_PROBE_BED_POSITION DELTA_PROBEABLE_RADIUS
 
-  // The Z probe minimum outer margin (to validate G29 parameters).
-  #define MIN_PROBE_EDGE 10
-
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 

Marlin/src/config/examples/delta/generic/Configuration.h

@@ -1047,14 +1047,14 @@
   #define GRID_MAX_POINTS_X 9
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  // The Z probe minimum outer margin (to validate G29 parameters).
+  #define MIN_PROBE_EDGE 10
+
   #define LEFT_PROBE_BED_POSITION -(DELTA_PROBEABLE_RADIUS)
   #define RIGHT_PROBE_BED_POSITION DELTA_PROBEABLE_RADIUS
   #define FRONT_PROBE_BED_POSITION -(DELTA_PROBEABLE_RADIUS)
   #define BACK_PROBE_BED_POSITION DELTA_PROBEABLE_RADIUS
 
-  // The Z probe minimum outer margin (to validate G29 parameters).
-  #define MIN_PROBE_EDGE 10
-
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 

Marlin/src/config/examples/delta/kossel_mini/Configuration.h

@@ -1050,14 +1050,14 @@
   #define GRID_MAX_POINTS_X 9
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  // The Z probe minimum outer margin (to validate G29 parameters).
+  #define MIN_PROBE_EDGE 10
+
   #define LEFT_PROBE_BED_POSITION -(DELTA_PROBEABLE_RADIUS)
   #define RIGHT_PROBE_BED_POSITION DELTA_PROBEABLE_RADIUS
   #define FRONT_PROBE_BED_POSITION -(DELTA_PROBEABLE_RADIUS)
   #define BACK_PROBE_BED_POSITION DELTA_PROBEABLE_RADIUS
 
-  // The Z probe minimum outer margin (to validate G29 parameters).
-  #define MIN_PROBE_EDGE 10
-
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 

Marlin/src/config/examples/delta/kossel_pro/Configuration.h

@@ -1050,14 +1050,14 @@
   #define GRID_MAX_POINTS_X 7
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  // The Z probe minimum outer margin (to validate G29 parameters).
+  #define MIN_PROBE_EDGE 10
+
   #define LEFT_PROBE_BED_POSITION -(DELTA_PROBEABLE_RADIUS)
   #define RIGHT_PROBE_BED_POSITION DELTA_PROBEABLE_RADIUS
   #define FRONT_PROBE_BED_POSITION -(DELTA_PROBEABLE_RADIUS)
   #define BACK_PROBE_BED_POSITION DELTA_PROBEABLE_RADIUS
 
-  // The Z probe minimum outer margin (to validate G29 parameters).
-  #define MIN_PROBE_EDGE 10
-
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 

Marlin/src/config/examples/delta/kossel_xl/Configuration.h

@@ -1059,14 +1059,14 @@
   #define GRID_MAX_POINTS_X 5
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  // The Z probe minimum outer margin (to validate G29 parameters).
+  #define MIN_PROBE_EDGE 10
+
   #define LEFT_PROBE_BED_POSITION -(DELTA_PROBEABLE_RADIUS)
   #define RIGHT_PROBE_BED_POSITION DELTA_PROBEABLE_RADIUS
   #define FRONT_PROBE_BED_POSITION - (DELTA_PROBEABLE_RADIUS - 20)
   #define BACK_PROBE_BED_POSITION DELTA_PROBEABLE_RADIUS - 40
 
-  // The Z probe minimum outer margin (to validate G29 parameters).
-  #define MIN_PROBE_EDGE 10
-
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 

Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h

@@ -940,15 +940,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 

Marlin/src/config/examples/makibox/Configuration.h

@@ -929,15 +929,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 

Marlin/src/config/examples/stm32f103ret6/Configuration.h

@@ -862,15 +862,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 

Marlin/src/config/examples/tvrrug/Round2/Configuration.h

@@ -921,15 +921,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
 

Marlin/src/config/examples/wt150/Configuration.h

@@ -931,15 +931,15 @@
   #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
   // The Z probe minimum outer margin (to validate G29 parameters).
   #define MIN_PROBE_EDGE 10
 
+  // Set the boundaries for probing (where the probe can reach).
+  #define LEFT_PROBE_BED_POSITION 15
+  #define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15)
+  #define FRONT_PROBE_BED_POSITION 15
+  #define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15)
+
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST