diff --git a/Marlin/src/HAL/HAL_DUE/usb/compiler.h b/Marlin/src/HAL/HAL_DUE/usb/compiler.h
index cecdd256f..7719c129c 100644
--- a/Marlin/src/HAL/HAL_DUE/usb/compiler.h
+++ b/Marlin/src/HAL/HAL_DUE/usb/compiler.h
@@ -230,7 +230,7 @@
 
 /* Define NO_INIT attribute */
 #if 0 //ndef NO_INIT
-#if defined   ( __CC_ARM   )
+#ifdef __CC_ARM
 #   define NO_INIT __attribute__((zero_init))
 #elif defined ( __ICCARM__ )
 #   define NO_INIT __no_init
@@ -262,7 +262,7 @@
 //! @{
 typedef unsigned char           Bool; //!< Boolean.
 #ifndef __cplusplus
-#if !defined(__bool_true_false_are_defined)
+#ifndef __bool_true_false_are_defined
 typedef unsigned char           bool; //!< Boolean.
 #endif
 #endif
@@ -443,7 +443,7 @@ typedef struct
 #define DISABLE   0
 #define ENABLE    1
 #ifndef __cplusplus
-#if !defined(__bool_true_false_are_defined)
+#ifndef __bool_true_false_are_defined
 #define false 0
 #define true 1
 #endif
diff --git a/Marlin/src/HAL/HAL_DUE/usb/osc.h b/Marlin/src/HAL/HAL_DUE/usb/osc.h
index fe09d6fd3..3a9543507 100644
--- a/Marlin/src/HAL/HAL_DUE/usb/osc.h
+++ b/Marlin/src/HAL/HAL_DUE/usb/osc.h
@@ -61,27 +61,27 @@ extern "C" {
  * Below BOARD_XXX macros are related to the specific board, and
  * should be defined by the board code, otherwise default value are used.
  */
-#if !defined(BOARD_FREQ_SLCK_XTAL)
+#ifndef BOARD_FREQ_SLCK_XTAL
 #  warning The board slow clock xtal frequency has not been defined.
 #  define BOARD_FREQ_SLCK_XTAL      (32768UL)
 #endif
 
-#if !defined(BOARD_FREQ_SLCK_BYPASS)
+#ifndef BOARD_FREQ_SLCK_BYPASS
 #  warning The board slow clock bypass frequency has not been defined.
 #  define BOARD_FREQ_SLCK_BYPASS    (32768UL)
 #endif
 
-#if !defined(BOARD_FREQ_MAINCK_XTAL)
+#ifndef BOARD_FREQ_MAINCK_XTAL
 #  warning The board main clock xtal frequency has not been defined.
 #  define BOARD_FREQ_MAINCK_XTAL    (12000000UL)
 #endif
 
-#if !defined(BOARD_FREQ_MAINCK_BYPASS)
+#ifndef BOARD_FREQ_MAINCK_BYPASS
 #  warning The board main clock bypass frequency has not been defined.
 #  define BOARD_FREQ_MAINCK_BYPASS  (12000000UL)
 #endif
 
-#if !defined(BOARD_OSC_STARTUP_US)
+#ifndef BOARD_OSC_STARTUP_US
 #  warning The board main clock xtal startup time has not been defined.
 #  define BOARD_OSC_STARTUP_US      (15625UL)
 #endif
diff --git a/Marlin/src/HAL/HAL_DUE/usb/spc_protocol.h b/Marlin/src/HAL/HAL_DUE/usb/spc_protocol.h
index e5e7603c9..6fadb9f36 100644
--- a/Marlin/src/HAL/HAL_DUE/usb/spc_protocol.h
+++ b/Marlin/src/HAL/HAL_DUE/usb/spc_protocol.h
@@ -43,12 +43,12 @@
  * \asf_license_stop
  *
  */
+
 /*
  * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
  */
-#ifndef  _SPC_PROTOCOL_H_
-#define  _SPC_PROTOCOL_H_
-
+#ifndef _SPC_PROTOCOL_H_
+#define _SPC_PROTOCOL_H_
 
 /**
  * \ingroup usb_msc_protocol
diff --git a/Marlin/src/HAL/HAL_DUE/usb/udi_cdc.h b/Marlin/src/HAL/HAL_DUE/usb/udi_cdc.h
index 45c5cef5a..526419c86 100644
--- a/Marlin/src/HAL/HAL_DUE/usb/udi_cdc.h
+++ b/Marlin/src/HAL/HAL_DUE/usb/udi_cdc.h
@@ -55,7 +55,7 @@
 #include "udi.h"
 
 // Check the number of port
-#ifndef  UDI_CDC_PORT_NB
+#ifndef UDI_CDC_PORT_NB
 # define  UDI_CDC_PORT_NB 1
 #endif
 #if (UDI_CDC_PORT_NB < 1) || (UDI_CDC_PORT_NB > 7)
diff --git a/Marlin/src/HAL/HAL_DUE/usb/udi_cdc_conf.h b/Marlin/src/HAL/HAL_DUE/usb/udi_cdc_conf.h
index b99d61117..cbd3eb00a 100644
--- a/Marlin/src/HAL/HAL_DUE/usb/udi_cdc_conf.h
+++ b/Marlin/src/HAL/HAL_DUE/usb/udi_cdc_conf.h
@@ -50,7 +50,7 @@
 #include "usb_protocol_cdc.h"
 #include "conf_usb.h"
 
-#ifndef  UDI_CDC_PORT_NB
+#ifndef UDI_CDC_PORT_NB
 # define  UDI_CDC_PORT_NB 1
 #endif
 
diff --git a/Marlin/src/HAL/HAL_STM32F1/SPI.h b/Marlin/src/HAL/HAL_STM32F1/SPI.h
index 1e77bf106..4f6841697 100644
--- a/Marlin/src/HAL/HAL_STM32F1/SPI.h
+++ b/Marlin/src/HAL/HAL_STM32F1/SPI.h
@@ -58,7 +58,7 @@
 #define SPI_2XCLOCK_MASK 0x01  // SPI2X = bit 0 on SPSR
 
 // define SPI_AVR_EIMSK for AVR boards with external interrupt pins
-#if defined(EIMSK)
+#ifdef EIMSK
   #define SPI_AVR_EIMSK EIMSK
 #elif defined(GICR)
   #define SPI_AVR_EIMSK GICR
diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h
index 66db197ec..0f4de7e8c 100644
--- a/Marlin/src/inc/SanityCheck.h
+++ b/Marlin/src/inc/SanityCheck.h
@@ -892,7 +892,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
  * Switching Toolhead requirements
  */
 #if ENABLED(SWITCHING_TOOLHEAD)
-  #if !defined(SWITCHING_TOOLHEAD_SERVO_NR)
+  #ifndef SWITCHING_TOOLHEAD_SERVO_NR
     #error "SWITCHING_TOOLHEAD requires SWITCHING_TOOLHEAD_SERVO_NR."
   #elif EXTRUDERS < 2
     #error "SWITCHING_TOOLHEAD requires at least 2 EXTRUDERS."
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/ftdi_basic.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/ftdi_basic.h
index 3d6541e70..e8f9f424d 100644
--- a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/ftdi_basic.h
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/ftdi_basic.h
@@ -24,7 +24,7 @@
 
 #include "../compat.h"
 
-#if !defined(__MARLIN_FIRMWARE__)
+#ifndef __MARLIN_FIRMWARE__
   #define FTDI_BASIC
 #endif
 
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/spi.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/spi.cpp
index af33b5f05..74b739aaf 100644
--- a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/spi.cpp
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/spi.cpp
@@ -27,7 +27,7 @@
 /********************************* SPI Functions *********************************/
 
 namespace FTDI {
-  #if !defined(CLCD_USE_SOFT_SPI)
+  #ifndef CLCD_USE_SOFT_SPI
     SPISettings SPI::spi_settings(SPI_FREQUENCY, MSBFIRST, SPI_MODE0);
   #endif
 
@@ -108,7 +108,7 @@ namespace FTDI {
 
   void SPI::spi_read_bulk (void *data, uint16_t len) {
     uint8_t* p = (uint8_t *)data;
-    #if !defined(CLCD_USE_SOFT_SPI)
+    #ifndef CLCD_USE_SOFT_SPI
       ::SPI.transfer(p, len);
     #else
       while (len--) *p++ = spi_recv();
@@ -123,7 +123,7 @@ namespace FTDI {
 
   // CLCD SPI - Chip Select
   void SPI::spi_ftdi_select (void) {
-    #if !defined(CLCD_USE_SOFT_SPI)
+    #ifndef CLCD_USE_SOFT_SPI
       ::SPI.beginTransaction(spi_settings);
     #endif
     WRITE(CLCD_SPI_CS, 0);
@@ -133,7 +133,7 @@ namespace FTDI {
   // CLCD SPI - Chip Deselect
   void SPI::spi_ftdi_deselect (void) {
     WRITE(CLCD_SPI_CS, 1);
-    #if !defined(CLCD_USE_SOFT_SPI)
+    #ifndef CLCD_USE_SOFT_SPI
       ::SPI.endTransaction();
     #endif
   }
@@ -141,7 +141,7 @@ namespace FTDI {
   #ifdef SPI_FLASH_SS
   // Serial SPI Flash SPI - Chip Select
   void SPI::spi_flash_select () {
-    #if !defined(CLCD_USE_SOFT_SPI)
+    #ifndef CLCD_USE_SOFT_SPI
     ::SPI.beginTransaction(spi_settings);
     #endif
     WRITE(SPI_FLASH_SS, 0);
@@ -151,7 +151,7 @@ namespace FTDI {
   // Serial SPI Flash SPI - Chip Deselect
   void SPI::spi_flash_deselect () {
     WRITE(SPI_FLASH_SS, 1);
-    #if !defined(CLCD_USE_SOFT_SPI)
+    #ifndef CLCD_USE_SOFT_SPI
     ::SPI.endTransaction();
     #endif
   }
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/spi.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/spi.h
index c5564eda0..18c9955a6 100644
--- a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/spi.h
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/spi.h
@@ -22,13 +22,13 @@
 
 #pragma once
 
-#if !defined(CLCD_USE_SOFT_SPI)
+#ifndef CLCD_USE_SOFT_SPI
   #include <SPI.h>
 #endif
 
 namespace FTDI {
   namespace SPI {
-    #if !defined(CLCD_USE_SOFT_SPI)
+    #ifndef CLCD_USE_SOFT_SPI
       extern SPISettings spi_settings;
     #endif
 
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/compat.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/compat.h
index bbce85c87..808c33276 100644
--- a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/compat.h
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/compat.h
@@ -31,7 +31,7 @@
 
   #include <Arduino.h>
 
-  #if !defined(CLCD_USE_SOFT_SPI)
+  #ifndef CLCD_USE_SOFT_SPI
     #include <SPI.h>
   #endif
 
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/ftdi_extended.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/ftdi_extended.h
index 43e390c1a..02a8738e9 100644
--- a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/ftdi_extended.h
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/ftdi_extended.h
@@ -25,7 +25,7 @@
 #include "../compat.h"
 #include "../basic/ftdi_basic.h"
 
-#if !defined(__MARLIN_FIRMWARE__)
+#ifndef __MARLIN_FIRMWARE__
   #define FTDI_EXTENDED
 #endif
 
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/screens.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/screens.h
index 2687089e8..6d50509f6 100644
--- a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/screens.h
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/screens.h
@@ -209,7 +209,7 @@ class SpinnerDialogBox : public DialogBoxBaseClass, public CachedScreen<SPINNER_
     static void enqueueAndWait_P(const progmem_str message, const progmem_str commands);
 };
 
-#if !defined(LULZBOT_USE_BIOPRINTER_UI)
+#ifndef LULZBOT_USE_BIOPRINTER_UI
 class StatusScreen : public BaseScreen, public CachedScreen<STATUS_SCREEN_CACHE,STATUS_SCREEN_DL_SIZE> {
   private:
     static void draw_axis_position(draw_mode_t);
diff --git a/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h b/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h
index 8e4bfeb8b..bc8037da0 100644
--- a/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h
+++ b/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h
@@ -128,7 +128,7 @@
   // P2_08 E1-Step
   // P2_13 E1-Dir
 
-  #ifndef  X_SERIAL_TX_PIN
+  #ifndef X_SERIAL_TX_PIN
     #define X_SERIAL_TX_PIN  P0_01
   #endif
   #ifndef X_SERIAL_RX_PIN
diff --git a/Marlin/src/pins/ramps/pins_Z_BOLT_X_SERIES.h b/Marlin/src/pins/ramps/pins_Z_BOLT_X_SERIES.h
index aa8081857..8545dc488 100644
--- a/Marlin/src/pins/ramps/pins_Z_BOLT_X_SERIES.h
+++ b/Marlin/src/pins/ramps/pins_Z_BOLT_X_SERIES.h
@@ -25,7 +25,7 @@
  *  Z-Bolt X Series board – based on Arduino Mega2560
  */
 
-#if !defined(__AVR_ATmega2560__)
+#ifndef __AVR_ATmega2560__
   #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
 #elif HOTENDS > 4 || E_STEPPERS > 4
   #error "Z-Bolt X Series board supports up to 4 hotends / E-steppers."
diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs2/settings.h b/Marlin/src/sd/usb_flashdrive/lib-uhs2/settings.h
index dc7782f2a..41821173d 100644
--- a/Marlin/src/sd/usb_flashdrive/lib-uhs2/settings.h
+++ b/Marlin/src/sd/usb_flashdrive/lib-uhs2/settings.h
@@ -153,7 +153,7 @@
 // define XMEM_ACQUIRE_SPI and XMEM_RELEASE_SPI to point to your lock and unlock.
 // NOTE: NO argument is passed. You have to do this within your routine for
 // whatever you are using to lock and unlock.
-#if !defined(XMEM_ACQUIRE_SPI)
+#ifndef XMEM_ACQUIRE_SPI
   #if USE_XMEM_SPI_LOCK || defined(USE_MULTIPLE_APP_API)
     #include <xmem.h>
   #else
diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_BULK_STORAGE/UHS_BULK_STORAGE.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_BULK_STORAGE/UHS_BULK_STORAGE.h
index 54458d116..a1f84d48a 100644
--- a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_BULK_STORAGE/UHS_BULK_STORAGE.h
+++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_BULK_STORAGE/UHS_BULK_STORAGE.h
@@ -24,7 +24,7 @@ Web      :  http://www.circuitsathome.com
 e-mail   :  support@circuitsathome.com
  */
 
-#if !defined(__UHS_BULK_STORAGE_H__)
+#ifndef __UHS_BULK_STORAGE_H__
 #define __UHS_BULK_STORAGE_H__
 
 
diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_UsbCore.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_UsbCore.h
index cad84fba1..190077d17 100644
--- a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_UsbCore.h
+++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_UsbCore.h
@@ -33,11 +33,11 @@ e-mail   :  support@circuitsathome.com
 #define                UHS_HOST_MAX_INTERFACE_DRIVERS 0x10U // Default maximum number of USB interface drivers
 #endif
 
-#if !defined(SYSTEM_OR_SPECIAL_YIELD)
+#ifndef SYSTEM_OR_SPECIAL_YIELD
 #define SYSTEM_OR_SPECIAL_YIELD(...) VOID0
 #endif
 
-#if !defined(SYSTEM_OR_SPECIAL_YIELD_FROM_ISR)
+#ifndef SYSTEM_OR_SPECIAL_YIELD_FROM_ISR
 #define SYSTEM_OR_SPECIAL_YIELD_FROM_ISR(...) SYSTEM_OR_SPECIAL_YIELD
 #endif
 
diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_address.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_address.h
index ce60e44ec..62d55af6f 100644
--- a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_address.h
+++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_address.h
@@ -226,7 +226,7 @@ public:
                 }
                 thePool[index].address = addr;
 #if DEBUG_PRINTF_EXTRA_HUGE
-#if defined(UHS_DEBUG_USB_ADDRESS)
+#ifdef UHS_DEBUG_USB_ADDRESS
                 printf("Address: %x (%x.%x.%x)\r\n", addr.devAddress, addr.bmHub, addr.bmParent, addr.bmAddress);
 #endif
 #endif
diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_host.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_host.h
index 36ca2bfc4..7f7d18116 100644
--- a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_host.h
+++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_host.h
@@ -58,7 +58,7 @@ e-mail   :  support@circuitsathome.com
 #include "UHS_host_INLINE.h"
 #include "UHS_printf_HELPER.h"
 
-#if defined(LOAD_USB_HOST_SHIELD)
+#ifdef LOAD_USB_HOST_SHIELD
 #include "USB_HOST_SHIELD/USB_HOST_SHIELD.h"
 #endif
 
@@ -72,24 +72,24 @@ e-mail   :  support@circuitsathome.com
 
 // Load USB drivers and multiplexers
 
-#if defined(LOAD_UHS_HUB)
+#ifdef LOAD_UHS_HUB
 #include "UHS_HUB/UHS_HUB.h"
 #endif // HUB loaded
 
-#if defined(LOAD_UHS_BULK_STORAGE)
+#ifdef LOAD_UHS_BULK_STORAGE
 #include "UHS_BULK_STORAGE/UHS_BULK_STORAGE.h"
 #endif
 
-#if defined(LOAD_GENERIC_STORAGE)
+#ifdef LOAD_GENERIC_STORAGE
 #include "../UHS_FS/UHS_FS.h"
 #endif
 // Add BT and optionally HID if directed to do so
-#if defined(LOAD_UHS_BT)
+#ifdef LOAD_UHS_BT
 #include "UHS_BT/UHS_BT.h"
 #endif // BT and optionally HID loaded
 
 // Add HID
-#if defined(LOAD_UHS_HID)
+#ifdef LOAD_UHS_HID
 #include "UHS_HID/UHS_HID.h"
 #endif // HID loaded
 
@@ -98,11 +98,11 @@ e-mail   :  support@circuitsathome.com
 #include "UHS_CDC/UHS_CDC.h"
 #endif // CDC loaded
 
-#if defined(LOAD_UHS_ADK)
+#ifdef LOAD_UHS_ADK
 #include "UHS_ADK/UHS_ADK.h"
 #endif
 
-#if defined(LOAD_UHS_MIDI)
+#ifdef LOAD_UHS_MIDI
 #include "UHS_MIDI/UHS_MIDI.h"
 #endif
 
diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_macros.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_macros.h
index afa20f30d..34eaed646 100644
--- a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_macros.h
+++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_macros.h
@@ -24,7 +24,7 @@ Web      :  http://www.circuitsathome.com
 e-mail   :  support@circuitsathome.com
  */
 
-#if !defined(MACROS_H)
+#ifndef MACROS_H
 #define MACROS_H
 #include "macro_logic.h"
 /*
@@ -49,18 +49,18 @@ e-mail   :  support@circuitsathome.com
 
 // Nuke screwed up macro junk from the IDE.
 #ifdef __cplusplus
-#if defined(true)
+#ifdef true
 #undef true
 #endif
-#if defined(false)
+#ifdef false
 #undef false
 #endif
 #endif
 
 
-#if !defined(UHS_DEVICE_WINDOWS_USB_SPEC_VIOLATION_DESCRIPTOR_DEVICE)
+#ifndef UHS_DEVICE_WINDOWS_USB_SPEC_VIOLATION_DESCRIPTOR_DEVICE
 
-#if !defined(UHS_BIG_FLASH)
+#ifndef UHS_BIG_FLASH
 
 #if defined(FLASHEND) && defined(FLASHSTART)
 #if (FLASHEND - FLASHSTART) > 0x0FFFFU
@@ -122,10 +122,10 @@ e-mail   :  support@circuitsathome.com
 // TODO: Fast inline code for AVR and SAM based microcontrollers
 //       This can be done pretty easily.
 //       For now, this will just work out-of-the-box.
-#if !defined(UHS_PIN_WRITE)
+#ifndef UHS_PIN_WRITE
 #define UHS_PIN_WRITE(p, v) digitalWrite(p, v)
 #endif
-#if !defined(UHS_PIN_READ)
+#ifndef UHS_PIN_READ
 #define UHS_PIN_READ(p) digitalRead(p)
 #endif
 
@@ -134,8 +134,8 @@ e-mail   :  support@circuitsathome.com
 #edfine noInterrupts() __builtin_disable_interrupts()
 #endif
 
-#if !defined(ARDUINO_SAMD_ZERO)
-#if defined(ARDUINO_AVR_ADK)
+#ifndef ARDUINO_SAMD_ZERO
+#ifdef ARDUINO_AVR_ADK
 #define UHS_GET_DPI(x) (x == 54 ? 6 : digitalPinToInterrupt(x))
 #else
 #define UHS_GET_DPI(x) digitalPinToInterrupt(x)
@@ -386,7 +386,7 @@ e-mail   :  support@circuitsathome.com
 #define USBTRACE2X(s,r) (USBTRACE3X((s),(r),0x80)); USB_HOST_SERIAL.flush()
 
 #define VOID0 ((void)0)
-#if !defined(NOTUSED)
+#ifndef NOTUSED
 #define NOTUSED(...)  __VA_ARGS__ __attribute__((unused))
 #endif
 #endif /* MACROS_H */
diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_printf_HELPER.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_printf_HELPER.h
index c5f87739c..f9ff21f25 100644
--- a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_printf_HELPER.h
+++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_printf_HELPER.h
@@ -27,7 +27,7 @@ e-mail   :  support@circuitsathome.com
 #ifndef UHS_PRINTF_HELPER_H
 #define	UHS_PRINTF_HELPER_H
 
-#if defined(LOAD_UHS_PRINTF_HELPER)
+#ifdef LOAD_UHS_PRINTF_HELPER
 #include <Arduino.h>
 #ifdef true
 #undef true
@@ -36,14 +36,14 @@ e-mail   :  support@circuitsathome.com
 #undef false
 #endif
 
-#if !defined(STDIO_IS_OK_TO_USE_AS_IS)
+#ifndef STDIO_IS_OK_TO_USE_AS_IS
 #if defined(ARDUINO_SAMD_ZERO) || defined(ARDUINO_SAM_DUE) || defined(ARDUINO_spresense_ast)
 // STDIO patching not required.
 #define STDIO_IS_OK_TO_USE_AS_IS
 #endif
 #endif
 
-#if !defined(STDIO_IS_OK_TO_USE_AS_IS)
+#ifndef STDIO_IS_OK_TO_USE_AS_IS
 // We need to patch STDIO so it can be used.
 
 #ifndef SERIAL_PORT_MONITOR
@@ -64,7 +64,7 @@ e-mail   :  support@circuitsathome.com
 #endif
 #endif
 
-#if !defined(NOTUSED)
+#ifndef NOTUSED
 #define NOTUSED(...)  __VA_ARGS__ __attribute__((unused))
 #endif
 
@@ -74,7 +74,7 @@ e-mail   :  support@circuitsathome.com
 #endif
 #endif
 
-#if defined(ARDUINO_ARCH_PIC32)
+#ifdef ARDUINO_ARCH_PIC32
 /*
  * For printf() output with pic32 Arduino
  */
@@ -169,7 +169,7 @@ extern "C" {
 
 
 
-#if defined(__AVR__)
+#ifdef __AVR__
 // The only wierdo in the bunch...
 void UHS_AVR_printf_HELPER_init(void) {
         // Set up stdio/stderr
@@ -194,7 +194,7 @@ void UHS_AVR_printf_HELPER_init(void) {
 #endif /* STDIO_IS_OK_TO_USE_AS_IS */
 #endif  /* load.... */
 
-#if !defined(UHS_printf_HELPER_init)
+#ifndef UHS_printf_HELPER_init
 #define UHS_printf_HELPER_init() (void(0))
 #endif
 #endif	/* UHS_PRINTF_HELPER_H */
diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_usbhost.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_usbhost.h
index 6db65c00a..b4fd4e4df 100644
--- a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_usbhost.h
+++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_usbhost.h
@@ -24,19 +24,19 @@ Web      :  http://www.circuitsathome.com
 e-mail   :  support@circuitsathome.com
  */
 
-#if !defined(_UHS_host_h_)
+#ifndef _UHS_host_h_
 #error "Never include UHS_usbhost.h directly; include UHS_host.h instead"
 #else
-#if !defined(_USBHOST_H_)
+#ifndef _USBHOST_H_
 #define _USBHOST_H_
 
 // Very early prototypes
-#if defined(UHS_LOAD_BT)
+#ifdef UHS_LOAD_BT
 void UHS_BT_SetUSBInterface(UHS_USB_HOST_BASE *host, ENUMERATION_INFO *ei);
 void UHS_BT_ScanUninitialized(UHS_USB_HOST_BASE *host);
 void UHS_BT_Poll(UHS_USB_HOST_BASE *host);
 #endif
-#if defined(UHS_LOAD_HID)
+#ifdef UHS_LOAD_HID
 void UHS_HID_SetUSBInterface(UHS_USB_HOST_BASE *host, ENUMERATION_INFO *ei);
 void UHS_HID_ScanUninitialized(UHS_USB_HOST_BASE *host);
 void UHS_HID_Poll(UHS_USB_HOST_BASE *host);
@@ -185,10 +185,10 @@ public:
         /////////////////////////////////////////////
         // these two probably will go away, and won't be used, TBD
         inline void Poll_Others(void) {
-#if defined(UHS_LOAD_BT)
+#ifdef UHS_LOAD_BT
                 UHS_BT_Poll(this);
 #endif
-#if defined(UHS_LOAD_HID)
+#ifdef UHS_LOAD_HID
                 UHS_HID_Poll(this);
 #endif
         }
diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/USB_HOST_SHIELD/USB_HOST_SHIELD.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/USB_HOST_SHIELD/USB_HOST_SHIELD.h
index ab80f6541..40831bca6 100644
--- a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/USB_HOST_SHIELD/USB_HOST_SHIELD.h
+++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/USB_HOST_SHIELD/USB_HOST_SHIELD.h
@@ -28,10 +28,10 @@ e-mail   :  support@circuitsathome.com
 #include <SPI.h>
 
 
-#if !defined(SPI_HAS_TRANSACTION)
+#ifndef SPI_HAS_TRANSACTION
 #error "Your SPI library installation is too old."
 #else
-#if !defined(SPI_ATOMIC_VERSION)
+#ifndef SPI_ATOMIC_VERSION
 #warning "Your SPI library installation lacks 'SPI_ATOMIC_VERSION'. Please complain to the maintainer."
 #elif SPI_ATOMIC_VERSION < 1
 #error "Your SPI library installation is too old."
@@ -48,8 +48,8 @@ e-mail   :  support@circuitsathome.com
 #define MAX_HOST_DEBUG(...) VOID0
 #endif
 
-#if !defined(USB_HOST_SHIELD_USE_ISR)
-#if defined(USE_MULTIPLE_APP_API)
+#ifndef USB_HOST_SHIELD_USE_ISR
+#ifdef USE_MULTIPLE_APP_API
 #define USB_HOST_SHIELD_USE_ISR 0
 #else
 #define USB_HOST_SHIELD_USE_ISR 1
@@ -66,7 +66,7 @@ e-mail   :  support@circuitsathome.com
 //
 // Polled defaults
 //
-#if defined(BOARD_BLACK_WIDDOW)
+#ifdef BOARD_BLACK_WIDDOW
 #define UHS_MAX3421E_SS_ 6
 #define UHS_MAX3421E_INT_ 3
 #elif defined(CORE_TEENSY) && (defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__))
@@ -91,7 +91,7 @@ e-mail   :  support@circuitsathome.com
 #endif
 
 #else
-#if defined(ARDUINO_ARCH_PIC32)
+#ifdef ARDUINO_ARCH_PIC32
 // PIC32 only allows edge interrupts, isn't that lovely? We'll emulate it...
 #if CHANGE < 2
 #error core too old.
@@ -113,8 +113,8 @@ e-mail   :  support@circuitsathome.com
 #endif
 
 // More stupidity from our friends @ Sony...
-#if defined(ARDUINO_spresense_ast)
-#if !defined(NOT_AN_INTERRUPT)
+#ifdef ARDUINO_spresense_ast
+#ifndef NOT_AN_INTERRUPT
 #define NOT_AN_INTERRUPT -1
 #endif
 #endif
@@ -158,7 +158,7 @@ e-mail   :  support@circuitsathome.com
 #else
 #define UHS_MAX3421E_SS_ 10
 #ifdef __AVR__
-#if defined(__AVR_ATmega32U4__)
+#ifdef __AVR_ATmega32U4__
 #define INT_FOR_PIN2 1
 #define INT_FOR_PIN3 0
 #else
@@ -169,7 +169,7 @@ e-mail   :  support@circuitsathome.com
 #define UHS_MAX3421E_INT_ 3
 #else
 // Non-avr
-#if defined(ARDUINO_ARCH_PIC32)
+#ifdef ARDUINO_ARCH_PIC32
 // UNO32 External Interrupts:
 // Pin 38 (INT0), Pin 2 (INT1), Pin 7 (INT2), Pin 8 (INT3), Pin 35 (INT4)
 #define UHS_MAX3421E_INT_ 7
@@ -182,7 +182,7 @@ e-mail   :  support@circuitsathome.com
 
 
 
-#if defined(NO_AUTO_SPEED)
+#ifdef NO_AUTO_SPEED
 // Ugly details section...
 // MAX3421E characteristics
 // SPI Serial - Clock Input. An external SPI master supplies SCLK with frequencies up to 26MHz. The
@@ -195,8 +195,8 @@ e-mail   :  support@circuitsathome.com
 // Theoretical deadline for reply 17.7ns
 // 26MHz 38.4615ns period <-- MAX3421E theoretical maximum
 
-#if !defined(UHS_MAX3421E_SPD)
-#if defined(ARDUINO_SAMD_ZERO)
+#ifndef UHS_MAX3421E_SPD
+#ifdef ARDUINO_SAMD_ZERO
 // Zero violates spec early, needs a long setup time, or doesn't like high latency.
 #define UHS_MAX3421E_SPD 10000000
 #elif defined(ARDUINO_ARCH_PIC32)
@@ -225,7 +225,7 @@ e-mail   :  support@circuitsathome.com
 // Why not 26MHz? Because I have not found any MCU board that
 // can actually go that fast without problems.
 // Could be a shield limitation too.
-#if !defined(UHS_MAX3421E_SPD)
+#ifndef UHS_MAX3421E_SPD
 #define UHS_MAX3421E_SPD 25000000
 #endif
 #endif
@@ -271,7 +271,7 @@ e-mail   :  support@circuitsathome.com
 //      |______|         |______| |______| |______________|
 //
 #define IRQ_SENSE FALLING
-#if defined(ARDUINO_ARCH_PIC32)
+#ifdef ARDUINO_ARCH_PIC32
 //#define bmPULSEWIDTH PUSLEWIDTH10_6
 #define bmPULSEWIDTH 0
 #define bmIRQ_SENSE 0
@@ -280,20 +280,20 @@ e-mail   :  support@circuitsathome.com
 #define bmIRQ_SENSE 0
 #endif
 #else
-#if !defined(IRQ_SENSE)
+#ifndef IRQ_SENSE
 #define IRQ_SENSE LOW
 #endif
-#if !defined(bmPULSEWIDTH)
+#ifndef bmPULSEWIDTH
 #define bmPULSEWIDTH 0
 #endif
-#if !defined(bmIRQ_SENSE)
+#ifndef bmIRQ_SENSE
 #define bmIRQ_SENSE bmINTLEVEL
 #endif
 #endif
 
 class MAX3421E_HOST :
 public UHS_USB_HOST_BASE
-#if defined(SWI_IRQ_NUM)
+#ifdef SWI_IRQ_NUM
 , public dyn_SWI
 #endif
 {
@@ -487,7 +487,7 @@ public:
         uint8_t* bytesRd(uint8_t reg, uint8_t nbytes, uint8_t* data_p);
 
         // ARM/NVIC specific, used to emulate reentrant ISR.
-#if defined(SWI_IRQ_NUM)
+#ifdef SWI_IRQ_NUM
 
         void dyn_SWISR(void) {
                 ISRbottom();
@@ -498,7 +498,7 @@ public:
                 // Used on MCU that lack control of IRQ priority (AVR).
                 // Suspends ISRs, for critical code. IRQ will be serviced after it is resumed.
                 // NOTE: you must track the state yourself!
-#if defined(__AVR__)
+#ifdef __AVR__
                 noInterrupts();
                 detachInterrupt(UHS_GET_DPI(irq_pin));
                 interrupts();
@@ -507,10 +507,10 @@ public:
 
         virtual void UHS_NI resume_host(void);
 };
-#if !defined(SPIclass)
+#ifndef SPIclass
 #define SPIclass SPI
 #endif
-#if !defined(USB_HOST_SHIELD_LOADED)
+#ifndef USB_HOST_SHIELD_LOADED
 #include "USB_HOST_SHIELD_INLINE.h"
 #endif
 #else
diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/USB_HOST_SHIELD/USB_HOST_SHIELD_INLINE.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/USB_HOST_SHIELD/USB_HOST_SHIELD_INLINE.h
index 78669305d..f32d60445 100644
--- a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/USB_HOST_SHIELD/USB_HOST_SHIELD_INLINE.h
+++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/USB_HOST_SHIELD/USB_HOST_SHIELD_INLINE.h
@@ -21,7 +21,7 @@ e-mail   :  support@circuitsathome.com
 #define USB_HOST_SHIELD_LOADED
 #include <Arduino.h>
 
-#if !defined(digitalPinToInterrupt)
+#ifndef digitalPinToInterrupt
 #error digitalPinToInterrupt not defined, complain to your board maintainer.
 #endif
 
@@ -49,7 +49,7 @@ void UHS_NI MAX3421E_HOST::resume_host(void) {
                 // Used on MCU that lack control of IRQ priority (AVR).
                 // Resumes ISRs.
                 // NOTE: you must track the state yourself!
-#if defined(__AVR__)
+#ifdef __AVR__
                 noInterrupts();
                 if(irq_pin & 1) {
                         ISRodd = this;
@@ -314,7 +314,7 @@ int16_t UHS_NI MAX3421E_HOST::Init(int16_t mseconds) {
 #if USB_HOST_SHIELD_USE_ISR
         int intr = digitalPinToInterrupt(irq_pin);
         if(intr == NOT_AN_INTERRUPT) {
-#if defined(ARDUINO_AVR_ADK)
+#ifdef ARDUINO_AVR_ADK
                 if(irq_pin == 54)
                         intr = 6;
                 else
@@ -325,7 +325,7 @@ int16_t UHS_NI MAX3421E_HOST::Init(int16_t mseconds) {
 #else
         SPIclass.usingInterrupt(255);
 #endif
-#if !defined(NO_AUTO_SPEED)
+#ifndef NO_AUTO_SPEED
         // test to get to reset acceptance.
         uint32_t spd = UHS_MAX3421E_SPD;
 again:
@@ -901,7 +901,7 @@ void UHS_NI MAX3421E_HOST::ISRTask(void)
 {
         DDSB();
 
-#if !defined(SWI_IRQ_NUM)
+#ifndef SWI_IRQ_NUM
         suspend_host();
 #if USB_HOST_SHIELD_USE_ISR
         // Enable interrupts
@@ -965,7 +965,7 @@ void UHS_NI MAX3421E_HOST::ISRTask(void)
                 //        usb_task_polling_disabled? "T" : "F");
                 DDSB();
                 regWr(rHIRQ, HIRQ_sendback);
-#if !defined(SWI_IRQ_NUM)
+#ifndef SWI_IRQ_NUM
         resume_host();
 #if USB_HOST_SHIELD_USE_ISR
         // Disable interrupts
@@ -981,7 +981,7 @@ void UHS_NI MAX3421E_HOST::ISRTask(void)
                         UHS_PIN_WRITE(USB_HOST_SHIELD_TIMING_PIN, HIGH);
 #endif
 
-#if defined(SWI_IRQ_NUM)
+#ifdef SWI_IRQ_NUM
                         // MAX_HOST_DEBUG(PSTR("--------------- Doing SWI ----------------"));
                         exec_SWI(this);
 #else
diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/macro_logic.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/macro_logic.h
index 9b2b5a374..f368604a9 100644
--- a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/macro_logic.h
+++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/macro_logic.h
@@ -139,7 +139,7 @@ AJK_IIF(AJK_BITAND(AJK_IS_COMPARABLE(x))(AJK_IS_COMPARABLE(y)) ) \
 
 #define AJK_FUN(AJK_count, AJK_v, AJK_args, AJK_body) AJK_v ## AJK_count (AJK_args) { AJK_body(AJK_count) }
 #define AJK_MAKE_FUNS(AJK_v, AJK_args, AJK_count, AJK_body) AJK_EVAL(AJK_REPEAT(AJK_count, AJK_FUN, AJK_v, AJK_args, AJK_body))
-#if defined(AJK_TEST_MACRO_LOGIC)
+#ifdef AJK_TEST_MACRO_LOGIC
 
 #define BODY(AJKindex) some(C, statement); contaning(a, test[AJKindex]);
 #define ZERO_TIMES_TEST 0
diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/dyn_SWI/SWI_INLINE.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/dyn_SWI/SWI_INLINE.h
index 5516fbf12..65f1e74fc 100644
--- a/Marlin/src/sd/usb_flashdrive/lib-uhs3/dyn_SWI/SWI_INLINE.h
+++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/dyn_SWI/SWI_INLINE.h
@@ -35,8 +35,8 @@
 static char dyn_SWI_initied = 0;
 static dyn_SWI* dyn_SWI_LIST[SWI_MAXIMUM_ALLOWED];
 static dyn_SWI* dyn_SWI_EXEC[SWI_MAXIMUM_ALLOWED];
-#if defined(__arm__)
-#if defined(__USE_CMSIS_VECTORS__)
+#ifdef __arm__
+#ifdef __USE_CMSIS_VECTORS__
 extern "C" {
         void (*_VectorsRam[VECTORTABLE_SIZE])(void)__attribute__((aligned(VECTORTABLE_ALIGNMENT)));
 }
@@ -55,20 +55,20 @@ __attribute__((always_inline)) static inline void __DSB(void) {
 /**
  * Execute queued class ISR routines.
  */
-#if defined(ARDUINO_ARCH_PIC32)
+#ifdef ARDUINO_ARCH_PIC32
 static p32_regset *ifs = ((p32_regset *) & IFS0) + (SWI_IRQ_NUM / 32); //interrupt flag register set
 static p32_regset *iec = ((p32_regset *) & IEC0) + (SWI_IRQ_NUM / 32); //interrupt enable control reg set
 static uint32_t swibit = 1 << (SWI_IRQ_NUM % 32);
 
 void
-#if defined(__PIC32MZXX__)
+#ifdef __PIC32MZXX__
         __attribute__((nomips16,at_vector(SWI_VECTOR),interrupt(SWI_IPL)))
 #else
         __attribute__((interrupt(),nomips16))
 #endif
         softISR(void) {
 #else
-#if defined(ARDUINO_spresense_ast)
+#ifdef ARDUINO_spresense_ast
 unsigned int softISR(void) {
 #else
 void softISR(void) {
@@ -82,7 +82,7 @@ void softISR(void) {
 
         // Make a working copy, while clearing the queue.
         noInterrupts();
-#if defined(ARDUINO_ARCH_PIC32)
+#ifdef ARDUINO_ARCH_PIC32
         //ifs->clr = swibit;
 #endif
         for(int i = 0; i < SWI_MAXIMUM_ALLOWED; i++) {
@@ -95,21 +95,21 @@ void softISR(void) {
         // Execute each class SWI
         for(int i = 0; i < SWI_MAXIMUM_ALLOWED; i++) {
                 if(dyn_SWI_EXEC[i]) {
-#if defined(__DYN_SWI_DEBUG_LED__)
+#ifdef __DYN_SWI_DEBUG_LED__
                         digitalWrite(__DYN_SWI_DEBUG_LED__, HIGH);
 #endif
                         dyn_SWI_EXEC[i]->dyn_SWISR();
-#if defined(__DYN_SWI_DEBUG_LED__)
+#ifdef __DYN_SWI_DEBUG_LED__
                         digitalWrite(__DYN_SWI_DEBUG_LED__, LOW);
 #endif
                 }
         }
-#if defined(ARDUINO_ARCH_PIC32)
+#ifdef ARDUINO_ARCH_PIC32
         noInterrupts();
         if(!dyn_SWI_EXEC[0]) ifs->clr = swibit;
         interrupts();
 #endif
-#if defined(ARDUINO_spresense_ast)
+#ifdef ARDUINO_spresense_ast
         return 0;
 #endif
 }
@@ -118,7 +118,7 @@ void softISR(void) {
 #endif
 
 
-#if defined(__arm__)
+#ifdef __arm__
 #ifndef interruptsStatus
 #define interruptsStatus() __interruptsStatus()
 static inline unsigned char __interruptsStatus(void) __attribute__((always_inline, unused));
@@ -136,7 +136,7 @@ static inline unsigned char __interruptsStatus(void) {
  */
 static void Init_dyn_SWI(void) {
         if(!dyn_SWI_initied) {
-#if defined(__USE_CMSIS_VECTORS__)
+#ifdef __USE_CMSIS_VECTORS__
                 uint32_t *X_Vectors = (uint32_t*)SCB->VTOR;
                 for(int i = 0; i < VECTORTABLE_SIZE; i++) {
                         _VectorsRam[i] = reinterpret_cast<void (*)()>(X_Vectors[i]); /* copy vector table to RAM */
@@ -147,7 +147,7 @@ static void Init_dyn_SWI(void) {
                 DDSB();
                 interrupts();
 #endif
-#if !defined(ARDUINO_spresense_ast)
+#ifndef ARDUINO_spresense_ast
                 for(int i = 0; i < SWI_MAXIMUM_ALLOWED; i++) dyn_SWI_LIST[i] = NULL;
                 noInterrupts();
                 _VectorsRam[SWI_IRQ_NUM + 16] = reinterpret_cast<void (*)()>(softISR);
@@ -156,7 +156,7 @@ static void Init_dyn_SWI(void) {
                 NVIC_SET_PRIORITY(SWI_IRQ_NUM, 255);
                 NVIC_ENABLE_IRQ(SWI_IRQ_NUM);
 #endif
-#if defined(__DYN_SWI_DEBUG_LED__)
+#ifdef __DYN_SWI_DEBUG_LED__
                 pinMode(__DYN_SWI_DEBUG_LED__, OUTPUT);
                 digitalWrite(__DYN_SWI_DEBUG_LED__, LOW);
 #endif
@@ -180,7 +180,7 @@ int exec_SWI(const dyn_SWI* klass) {
                 if(!dyn_SWI_LIST[i]) {
                         rc = 1 + i; // Success!
                         dyn_SWI_LIST[i] = (dyn_SWI*)klass;
-#if !defined(ARDUINO_spresense_ast)
+#ifndef ARDUINO_spresense_ast
                         if(!NVIC_GET_PENDING(SWI_IRQ_NUM)) NVIC_SET_PENDING(SWI_IRQ_NUM);
 #else
                         // Launch 1-shot timer as an emulated SWI
@@ -211,7 +211,7 @@ static void Init_dyn_SWI(void) {
                 iec->clr = swibit;
                 iec->set = swibit;
                 restoreInterrupts(sreg);
-#if defined(__DYN_SWI_DEBUG_LED__)
+#ifdef __DYN_SWI_DEBUG_LED__
                 pinMode(__DYN_SWI_DEBUG_LED__, OUTPUT);
                 UHS_PIN_WRITE(__DYN_SWI_DEBUG_LED__, LOW);
 #endif
diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/dyn_SWI/dyn_SWI.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/dyn_SWI/dyn_SWI.h
index 93118a6d7..3ff839c80 100644
--- a/Marlin/src/sd/usb_flashdrive/lib-uhs3/dyn_SWI/dyn_SWI.h
+++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/dyn_SWI/dyn_SWI.h
@@ -24,26 +24,26 @@
 
 
 #if defined(__arm__) || defined(ARDUINO_ARCH_PIC32)
-#if defined(ARDUINO_ARCH_PIC32)
+#ifdef ARDUINO_ARCH_PIC32
 #include <p32xxxx.h>
 #endif
 #ifdef __cplusplus
 
-#if defined(true)
+#ifdef true
 #undef true
 #endif
 
-#if defined(false)
+#ifdef false
 #undef false
 #endif
 
 #endif
 
-#if defined(ARDUINO_spresense_ast)
+#ifdef ARDUINO_spresense_ast
 #define SWI_IRQ_NUM 666 // because this board is totally evil.
 #elif defined(ARDUINO_ARCH_PIC32)
 #ifndef SWI_IRQ_NUM
-#if defined(_DSPI0_IPL_ISR)
+#ifdef _DSPI0_IPL_ISR
 #define SWI_IPL _DSPI0_IPL_ISR
 #define SWI_VECTOR _DSPI0_ERR_IRQ
 #define SWI_IRQ_NUM _DSPI0_ERR_IRQ
@@ -57,7 +57,7 @@
 extern "C"
 {
         void
-#if defined(__PIC32MZXX__)
+#ifdef __PIC32MZXX__
                 __attribute__((nomips16,at_vector(SWI_VECTOR),interrupt(SWI_IPL)))
 #else
                 __attribute__((interrupt(),nomips16))
@@ -69,7 +69,7 @@ extern "C"
 #elif !defined(NVIC_NUM_INTERRUPTS)
 // Assume CMSIS
 #define __USE_CMSIS_VECTORS__
-#if defined(NUMBER_OF_INT_VECTORS)
+#ifdef NUMBER_OF_INT_VECTORS
 #define NVIC_NUM_INTERRUPTS (NUMBER_OF_INT_VECTORS-16)
 #else
 #define NVIC_NUM_INTERRUPTS ((int)PERIPH_COUNT_IRQn)
@@ -114,7 +114,7 @@ extern "C"
 #ifndef NVIC_GET_PENDING
 #define NVIC_GET_PENDING(n)	(*((volatile uint32_t *)0xE000E200 + ((n) >> 5)) & (1 << ((n) & 31)))
 #ifndef SWI_IRQ_NUM
-#if defined(__MK20DX256__)
+#ifdef __MK20DX256__
 #define SWI_IRQ_NUM 17
 #elif defined(__MK20DX128__)
 #define SWI_IRQ_NUM 5
@@ -165,7 +165,7 @@ extern int exec_SWI(const dyn_SWI* klass);
 // if no SWI for CPU (e.g. AVR) make a void stub.
 #ifndef SWI_NO_STUB
 #define Init_dyn_SWI() (void(0))
-#if !defined(DDSB)
+#ifndef DDSB
 #define DDSB() (void(0))
 #endif
 #endif
diff --git a/buildroot/share/PlatformIO/variants/BIGTREE_GENERIC_STM32F407_5X/stm32f4xx_hal_conf.h b/buildroot/share/PlatformIO/variants/BIGTREE_GENERIC_STM32F407_5X/stm32f4xx_hal_conf.h
index 36d69b64c..50d59af3b 100644
--- a/buildroot/share/PlatformIO/variants/BIGTREE_GENERIC_STM32F407_5X/stm32f4xx_hal_conf.h
+++ b/buildroot/share/PlatformIO/variants/BIGTREE_GENERIC_STM32F407_5X/stm32f4xx_hal_conf.h
@@ -87,11 +87,11 @@ extern "C" {
   *        This value is used by the RCC HAL module to compute the system frequency
   *        (when HSE is used as system clock source, directly or through the PLL).
   */
-#if !defined  (HSE_VALUE)
+#ifndef HSE_VALUE
 #define HSE_VALUE    ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */
 #endif /* HSE_VALUE */
 
-#if !defined  (HSE_STARTUP_TIMEOUT)
+#ifndef HSE_STARTUP_TIMEOUT
 #define HSE_STARTUP_TIMEOUT    ((uint32_t)100U)   /*!< Time out for HSE start up, in ms */
 #endif /* HSE_STARTUP_TIMEOUT */
 
@@ -100,14 +100,14 @@ extern "C" {
   *        This value is used by the RCC HAL module to compute the system frequency
   *        (when HSI is used as system clock source, directly or through the PLL).
   */
-#if !defined  (HSI_VALUE)
+#ifndef HSI_VALUE
 #define HSI_VALUE    ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
 #endif /* HSI_VALUE */
 
  /**
   * @brief Internal Low Speed oscillator (LSI) value.
   */
-#if !defined  (LSI_VALUE)
+#ifndef LSI_VALUE
 #define LSI_VALUE  ((uint32_t)32000U)       /*!< LSI Typical Value in Hz*/
 #endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
 The real value may vary depending on the variations
@@ -115,11 +115,11 @@ in voltage and temperature.*/
  /**
   * @brief External Low Speed oscillator (LSE) value.
   */
-#if !defined  (LSE_VALUE)
+#ifndef LSE_VALUE
 #define LSE_VALUE  ((uint32_t)32768U)    /*!< Value of the External Low Speed oscillator in Hz */
 #endif /* LSE_VALUE */
 
-#if !defined  (LSE_STARTUP_TIMEOUT)
+#ifndef LSE_STARTUP_TIMEOUT
 #define LSE_STARTUP_TIMEOUT    ((uint32_t)5000U)   /*!< Time out for LSE start up, in ms */
 #endif /* LSE_STARTUP_TIMEOUT */
 
@@ -128,7 +128,7 @@ in voltage and temperature.*/
   *        This value is used by the I2S HAL module to compute the I2S clock source
   *        frequency, this source is inserted directly through I2S_CKIN pad.
   */
-#if !defined  (EXTERNAL_CLOCK_VALUE)
+#ifndef EXTERNAL_CLOCK_VALUE
 #define EXTERNAL_CLOCK_VALUE    ((uint32_t)12288000U) /*!< Value of the External audio frequency in Hz*/
 #endif /* EXTERNAL_CLOCK_VALUE */
 
@@ -455,7 +455,7 @@ in voltage and temperature.*/
 #endif /* HAL_MMC_MODULE_ENABLED */
 
 /* Exported macro ------------------------------------------------------------*/
-#ifdef  USE_FULL_ASSERT
+#ifdef USE_FULL_ASSERT
  /**
   * @brief  The assert_param macro is used for function's parameters check.
   * @param  expr: If expr is false, it calls assert_failed function
diff --git a/buildroot/share/PlatformIO/variants/MARLIN_F407VE/stm32f4xx_hal_conf.h b/buildroot/share/PlatformIO/variants/MARLIN_F407VE/stm32f4xx_hal_conf.h
index 36d69b64c..50d59af3b 100644
--- a/buildroot/share/PlatformIO/variants/MARLIN_F407VE/stm32f4xx_hal_conf.h
+++ b/buildroot/share/PlatformIO/variants/MARLIN_F407VE/stm32f4xx_hal_conf.h
@@ -87,11 +87,11 @@ extern "C" {
   *        This value is used by the RCC HAL module to compute the system frequency
   *        (when HSE is used as system clock source, directly or through the PLL).
   */
-#if !defined  (HSE_VALUE)
+#ifndef HSE_VALUE
 #define HSE_VALUE    ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */
 #endif /* HSE_VALUE */
 
-#if !defined  (HSE_STARTUP_TIMEOUT)
+#ifndef HSE_STARTUP_TIMEOUT
 #define HSE_STARTUP_TIMEOUT    ((uint32_t)100U)   /*!< Time out for HSE start up, in ms */
 #endif /* HSE_STARTUP_TIMEOUT */
 
@@ -100,14 +100,14 @@ extern "C" {
   *        This value is used by the RCC HAL module to compute the system frequency
   *        (when HSI is used as system clock source, directly or through the PLL).
   */
-#if !defined  (HSI_VALUE)
+#ifndef HSI_VALUE
 #define HSI_VALUE    ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
 #endif /* HSI_VALUE */
 
  /**
   * @brief Internal Low Speed oscillator (LSI) value.
   */
-#if !defined  (LSI_VALUE)
+#ifndef LSI_VALUE
 #define LSI_VALUE  ((uint32_t)32000U)       /*!< LSI Typical Value in Hz*/
 #endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
 The real value may vary depending on the variations
@@ -115,11 +115,11 @@ in voltage and temperature.*/
  /**
   * @brief External Low Speed oscillator (LSE) value.
   */
-#if !defined  (LSE_VALUE)
+#ifndef LSE_VALUE
 #define LSE_VALUE  ((uint32_t)32768U)    /*!< Value of the External Low Speed oscillator in Hz */
 #endif /* LSE_VALUE */
 
-#if !defined  (LSE_STARTUP_TIMEOUT)
+#ifndef LSE_STARTUP_TIMEOUT
 #define LSE_STARTUP_TIMEOUT    ((uint32_t)5000U)   /*!< Time out for LSE start up, in ms */
 #endif /* LSE_STARTUP_TIMEOUT */
 
@@ -128,7 +128,7 @@ in voltage and temperature.*/
   *        This value is used by the I2S HAL module to compute the I2S clock source
   *        frequency, this source is inserted directly through I2S_CKIN pad.
   */
-#if !defined  (EXTERNAL_CLOCK_VALUE)
+#ifndef EXTERNAL_CLOCK_VALUE
 #define EXTERNAL_CLOCK_VALUE    ((uint32_t)12288000U) /*!< Value of the External audio frequency in Hz*/
 #endif /* EXTERNAL_CLOCK_VALUE */
 
@@ -455,7 +455,7 @@ in voltage and temperature.*/
 #endif /* HAL_MMC_MODULE_ENABLED */
 
 /* Exported macro ------------------------------------------------------------*/
-#ifdef  USE_FULL_ASSERT
+#ifdef USE_FULL_ASSERT
  /**
   * @brief  The assert_param macro is used for function's parameters check.
   * @param  expr: If expr is false, it calls assert_failed function
diff --git a/config/examples/Alfawise/U20-bltouch/Configuration.h b/config/examples/Alfawise/U20-bltouch/Configuration.h
index 73709f237..cd35306c0 100644
--- a/config/examples/Alfawise/U20-bltouch/Configuration.h
+++ b/config/examples/Alfawise/U20-bltouch/Configuration.h
@@ -592,7 +592,7 @@
   #define DEFAULT_bedKd 1164.25
 #endif
 
-#if defined(U20_PLUS)
+#ifdef U20_PLUS
   // These PID setting MUST be updated.
   // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
   #define DEFAULT_bedKp 841.68
@@ -1114,7 +1114,7 @@
 #define Z_MACHINE_MAX 400
 #endif
 
-#if defined(U20_PLUS)
+#ifdef U20_PLUS
 #define X_BED_SIZE 400
 #define Y_BED_SIZE 400
 #define Z_MACHINE_MAX 500
diff --git a/config/examples/Alfawise/U20/Configuration.h b/config/examples/Alfawise/U20/Configuration.h
index 2ecd3f8ae..a8fe4d2bb 100644
--- a/config/examples/Alfawise/U20/Configuration.h
+++ b/config/examples/Alfawise/U20/Configuration.h
@@ -592,7 +592,7 @@
   #define DEFAULT_bedKd 1164.25
 #endif
 
-#if defined(U20_PLUS)
+#ifdef U20_PLUS
   // These PID setting MUST be updated.
   // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
   #define DEFAULT_bedKp 841.68
@@ -1114,7 +1114,7 @@
 #define Z_MACHINE_MAX 400
 #endif
 
-#if defined(U20_PLUS)
+#ifdef U20_PLUS
 #define X_BED_SIZE 400
 #define Y_BED_SIZE 400
 #define Z_MACHINE_MAX 500