Consolidate setting of RAMPS High Voltage PWM outputs

This commit is contained in:
Scott Lahteine 2016-07-29 16:13:19 -07:00
parent bdac2eb13a
commit 3865843283
7 changed files with 88 additions and 49 deletions

View file

@ -24,9 +24,13 @@
* AZTEEG_X3 Arduino Mega with RAMPS v1.4 pin assignments
*/
#if HOTENDS > 2
#error "Azteeg X3 supports up to 2 hotends. Comment this line to keep going."
#endif
#define BOARD_NAME "Azteeg X3"
#include "pins_RAMPS_14_EFB.h"
#include "pins_RAMPS_14.h"
#if ENABLED(VIKI2) || ENABLED(miniVIKI)

View file

@ -24,9 +24,13 @@
* BAM&DICE Due (Arduino Mega) pin assignments
*/
#if HOTENDS > 2
#error "2PrintBeta Due supports up to 2 hotends. Comment this line to keep going."
#endif
#define BOARD_NAME "2PrintBeta Due"
#include "pins_RAMPS_14_EFB.h"
#include "pins_RAMPS_14.h"
#undef TEMP_0_PIN
#undef TEMP_1_PIN

View file

@ -24,12 +24,15 @@
* FELIXprinters v2.0/3.0 (RAMPS v1.4) pin assignments
*/
#if HOTENDS > 2
#error "Felix 2.0+ supports up to 2 hotends. Comment this line to keep going."
#endif
#define BOARD_NAME "Felix 2.0+"
#include "pins_RAMPS_14_EFB.h"
#define HI_VOLT_PIN_D 7
#undef HEATER_1_PIN
#define HEATER_1_PIN 7 // EXTRUDER 2
#include "pins_RAMPS_14_EFB.h"
#undef SDPOWER
#define SDPOWER 1

View file

@ -29,12 +29,15 @@
* MKS v1.4 (Extruder, Extruder, Fan, Bed)
*/
#if HOTENDS > 2
#error "MKS 1.3/1.4 supports up to 2 hotends. Comment this line to keep going."
#endif
#define BOARD_NAME "MKS > v1.3"
#include "pins_RAMPS_14_EFB.h"
#define HI_VOLT_PIN_D 7
#undef HEATER_1_PIN
#define HEATER_1_PIN 7 // EXTRUDER 2 (-1 on RAMPS 1.4)
#include "pins_RAMPS_14_EFB.h"
#if ENABLED(VIKI2) || ENABLED(miniVIKI)
/**

View file

@ -24,9 +24,12 @@
* MKS BASE 1.0 Arduino Mega2560 with RAMPS v1.4 pin assignments
*/
#if HOTENDS > 2
#error "MKS BASE 1.0 supports up to 2 hotends. Comment this line to keep going."
#endif
#define BOARD_NAME "MKS BASE 1.0"
#include "pins_RAMPS_14_EFB.h"
#define HI_VOLT_PIN_D 7
#undef HEATER_1_PIN
#define HEATER_1_PIN 7
#include "pins_RAMPS_14_EFB.h"

View file

@ -105,32 +105,7 @@
// define digital pin 4 for the filament runout sensor. Use the RAMPS 1.4 digital input 4 on the servos connector
#define FIL_RUNOUT_PIN 4
#if MB(RAMPS_14_EFF) || MB(RAMPS_13_EFF) || ENABLED(IS_RAMPS_EFB)
#define FAN_PIN 9 // (Sprinter config)
#if MB(RAMPS_14_EFF) || MB(RAMPS_13_EFF)
#define CONTROLLERFAN_PIN -1 // Pin used for the fan to cool controller
#endif
#elif MB(RAMPS_14_EEF) || MB(RAMPS_14_SF) || MB(RAMPS_13_EEF) || MB(RAMPS_13_SF)
#define FAN_PIN 8
#else
#define FAN_PIN 4 // IO pin. Buffer needed
#endif
#define PS_ON_PIN 12
#if MB(RAMPS_14_EFF) || MB(RAMPS_13_EFF)
#define HEATER_0_PIN 8
#else
#define HEATER_0_PIN 10 // EXTRUDER 1
#if !MB(RAMPS_14_EEF) && !MB(RAMPS_13_EEF) && !MB(RAMPS_14_SF) && !MB(RAMPS_13_SF)
#define HEATER_BED_PIN 8 // BED
#endif
#endif
#if !MB(RAMPS_14_SF) && !MB(RAMPS_13_SF) && !ENABLED(IS_RAMPS_EFB)
#define HEATER_1_PIN 9 // EXTRUDER 2 (FAN On Sprinter)
#endif
#define TEMP_0_PIN 13 // ANALOG NUMBERING
#define TEMP_1_PIN 15 // ANALOG NUMBERING
#define TEMP_BED_PIN 14 // ANALOG NUMBERING
@ -139,6 +114,56 @@
#define SLED_PIN -1
#endif
/**
* Hi Voltage PWM Pin Assignments
*/
#ifndef HI_VOLT_PIN_D
#define HI_VOLT_PIN_D -1
#endif
#ifndef HI_VOLT_PIN_C
#define HI_VOLT_PIN_C 8
#endif
#ifndef HI_VOLT_PIN_B
#define HI_VOLT_PIN_B 9
#endif
#ifndef HI_VOLT_PIN_A
#define HI_VOLT_PIN_A 10
#endif
#if ENABLED(IS_RAMPS_EFB) // Hotend, Fan, Bed
#define HEATER_0_PIN HI_VOLT_PIN_A
#define FAN_PIN HI_VOLT_PIN_B
#define HEATER_BED_PIN HI_VOLT_PIN_C
#if EXTRUDERS == 1
#define FAN1_PIN HI_VOLT_PIN_D
#else
#define HEATER_1_PIN HI_VOLT_PIN_D
#endif
#elif MB(RAMPS_13_EEF) || MB(RAMPS_14_EEF) // Hotend, Hotend, Fan
#define HEATER_0_PIN HI_VOLT_PIN_A
#define HEATER_1_PIN HI_VOLT_PIN_B
#define FAN_PIN HI_VOLT_PIN_C
#elif MB(RAMPS_13_EEB) || MB(RAMPS_14_EEB) // Hotend, Hotend, Bed
#define HEATER_0_PIN HI_VOLT_PIN_A
#define HEATER_1_PIN HI_VOLT_PIN_B
#define HEATER_BED_PIN HI_VOLT_PIN_C
#define FAN_PIN 4 // IO pin. Buffer needed
#elif MB(RAMPS_13_EFF) || MB(RAMPS_14_EFF) // Hotend, Fan, Fan (EFF is reversed?)
#define HEATER_0_PIN HI_VOLT_PIN_C
#define FAN_PIN HI_VOLT_PIN_B
#define FAN1_PIN HI_VOLT_PIN_A
#define CONTROLLERFAN_PIN -1
#elif MB(RAMPS_13_SF) || MB(RAMPS_14_SF) // Spindle, Fan
#define FAN_PIN HI_VOLT_PIN_C
#endif
/**
* LCD Controller Pin Assignments
*/
#if ENABLED(ULTRA_LCD)
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
@ -301,4 +326,3 @@
#else
#define MAX6675_SS 66 // Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
#endif

View file

@ -24,16 +24,14 @@
* Sainsmart 2-in-1 pin assignments
*/
#if HOTENDS > 2
#error "Sainsmart 2-in-1 supports up to 2 hotends. Comment this line to keep going."
#endif
#define BOARD_NAME "Sainsmart"
#define HI_VOLT_PIN_A 9
#define HI_VOLT_PIN_B 7 // PART FAN in front of board next to Extruder heat
#define HI_VOLT_PIN_D 10
#include "pins_RAMPS_14_EFB.h"
#undef BOARD_NAME
#define BOARD_NAME "Sainsmart"
#undef FAN_PIN
#define FAN_PIN 7 // PART FAN in front of board next to Extruder heat
#undef HEATER_0_PIN
#define HEATER_0_PIN 9 // EXTRUDER 1
#undef HEATER_1_PIN
#define HEATER_1_PIN 10 // EXTRUDER 2