Clean up trailing whitespace

Marlin/Configuration_adv.h

@@ -1949,14 +1949,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/default/Configuration_adv.h

@@ -1949,14 +1949,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/3DFabXYZ/Migbot/Configuration_adv.h

@@ -1951,14 +1951,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h

@@ -1948,14 +1948,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/Anet/A2/Configuration_adv.h

@@ -1948,14 +1948,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h

@@ -1948,14 +1948,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/Anet/A6/Configuration_adv.h

@@ -1947,14 +1947,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/Anet/A8/Configuration_adv.h

@@ -1948,14 +1948,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/AnyCubic/i3/Configuration_adv.h

@@ -1949,14 +1949,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/ArmEd/Configuration_adv.h

@@ -1953,14 +1953,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h

@@ -1947,14 +1947,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h

@@ -1948,14 +1948,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h

@@ -1948,14 +1948,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h

@@ -1956,14 +1956,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h

@@ -1948,14 +1948,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/Cartesio/Configuration_adv.h

@@ -1948,14 +1948,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h

@@ -1951,14 +1951,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h

@@ -1948,14 +1948,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h

@@ -1948,14 +1948,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h

@@ -1948,14 +1948,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h

@@ -1948,14 +1948,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h

@@ -1948,14 +1948,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h

@@ -1948,14 +1948,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/Einstart-S/Configuration_adv.h

@@ -1948,14 +1948,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/Felix/Configuration_adv.h

@@ -1948,14 +1948,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/FlashForge/CreatorPro/Configuration_adv.h

@@ -1947,14 +1947,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h

@@ -1948,14 +1948,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h

@@ -1952,14 +1952,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h

@@ -1953,14 +1953,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h

@@ -1948,14 +1948,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/Geeetech/MeCreator2/Configuration_adv.h

@@ -1934,14 +1934,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h

@@ -1948,14 +1948,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h

@@ -1948,14 +1948,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h

@@ -1948,14 +1948,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h

@@ -1948,14 +1948,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/MakerParts/Configuration_adv.h

@@ -1948,14 +1948,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/Malyan/M150/Configuration_adv.h

@@ -1948,14 +1948,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/Malyan/M200/Configuration_adv.h

@@ -1948,14 +1948,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h

@@ -1948,14 +1948,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/Mks/Robin/Configuration_adv.h

@@ -1949,14 +1949,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h

@@ -1956,14 +1956,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/RapideLite/RL200/Configuration_adv.h

@@ -1949,14 +1949,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/RigidBot/Configuration_adv.h

@@ -1948,14 +1948,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/SCARA/Configuration_adv.h

@@ -1948,14 +1948,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/Sanguinololu/Configuration_adv.h

@@ -1948,14 +1948,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/TheBorg/Configuration_adv.h

@@ -1948,14 +1948,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/TinyBoy2/Configuration_adv.h

@@ -1948,14 +1948,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h

@@ -1948,14 +1948,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/UltiMachine/Archim1/Configuration_adv.h

@@ -1949,14 +1949,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h

@@ -1948,14 +1948,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/VORONDesign/Configuration_adv.h

@@ -1949,14 +1949,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h

@@ -1961,14 +1961,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h

@@ -1948,14 +1948,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/WASP/PowerWASP/Configuration_adv.h

@@ -1949,14 +1949,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h

@@ -1950,14 +1950,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h

@@ -1950,14 +1950,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h

@@ -1950,14 +1950,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h

@@ -1950,14 +1950,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h

@@ -1950,14 +1950,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h

@@ -1951,14 +1951,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/delta/MKS/SBASE/Configuration_adv.h

@@ -1950,14 +1950,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/delta/Tevo Little Monster/Configuration_adv.h

@@ -1938,14 +1938,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/delta/generic/Configuration_adv.h

@@ -1950,14 +1950,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h

@@ -1950,14 +1950,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h

@@ -1950,14 +1950,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h

@@ -1948,14 +1948,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/makibox/Configuration_adv.h

@@ -1948,14 +1948,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h

@@ -1948,14 +1948,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/config/examples/wt150/Configuration_adv.h

@@ -1949,14 +1949,14 @@
  * Specify an action command to send to the host on pause and resume.
  * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
  * The host must be configured to handle the action command.
- * 
+ *
  *   PAUSE / RESUME : Used in non-parking scenarios where the host handles the
  *                    action while Marlin continues to process G-Code. (M24/M25)
- * 
+ *
  * PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
  *                    change actions and the host needs to stop sending commands
  *                    until the machine is ready to resume. (M125/M600)
- * 
+ *
  *           CANCEL : Instructs the host to abort the print job. Used when the
  *                    print is canceled from the LCD menu.
  */

Marlin/src/feature/prusa_MMU2/mmu2.cpp

@@ -228,7 +228,7 @@ void MMU2::mmuLoop() {
       }
       break;
 
-    case -4: 
+    case -4:
       if (rx_ok()) {
         sscanf(rx_buffer, "%hhuok\n", &finda);