_buffer_line => buffer_segment

This commit is contained in:
Scott Lahteine 2017-12-09 07:41:19 -06:00
parent a71d2f3f40
commit 3db5303bfe
3 changed files with 23 additions and 23 deletions

View file

@ -139,7 +139,7 @@
// Note: There is no Z Correction in this case. We are off the grid and don't know what
// a reasonable correction would be.
planner._buffer_line(end[X_AXIS], end[Y_AXIS], end[Z_AXIS], end[E_AXIS], feed_rate, extruder);
planner.buffer_segment(end[X_AXIS], end[Y_AXIS], end[Z_AXIS], end[E_AXIS], feed_rate, extruder);
set_current_from_destination();
if (g26_debug_flag)
@ -183,7 +183,7 @@
*/
if (isnan(z0)) z0 = 0.0;
planner._buffer_line(end[X_AXIS], end[Y_AXIS], end[Z_AXIS] + z0, end[E_AXIS], feed_rate, extruder);
planner.buffer_segment(end[X_AXIS], end[Y_AXIS], end[Z_AXIS] + z0, end[E_AXIS], feed_rate, extruder);
if (g26_debug_flag)
debug_current_and_destination(PSTR("FINAL_MOVE in ubl.line_to_destination()"));
@ -274,7 +274,7 @@
* Without this check, it is possible for the algorithm to generate a zero length move in the case
* where the line is heading down and it is starting right on a Mesh Line boundary. For how often that
* happens, it might be best to remove the check and always 'schedule' the move because
* the planner._buffer_line() routine will filter it if that happens.
* the planner.buffer_segment() routine will filter it if that happens.
*/
if (ry != start[Y_AXIS]) {
if (!inf_normalized_flag) {
@ -287,7 +287,7 @@
z_position = end[Z_AXIS];
}
planner._buffer_line(rx, ry, z_position + z0, e_position, feed_rate, extruder);
planner.buffer_segment(rx, ry, z_position + z0, e_position, feed_rate, extruder);
} //else printf("FIRST MOVE PRUNED ");
}
@ -338,7 +338,7 @@
* Without this check, it is possible for the algorithm to generate a zero length move in the case
* where the line is heading left and it is starting right on a Mesh Line boundary. For how often
* that happens, it might be best to remove the check and always 'schedule' the move because
* the planner._buffer_line() routine will filter it if that happens.
* the planner.buffer_segment() routine will filter it if that happens.
*/
if (rx != start[X_AXIS]) {
if (!inf_normalized_flag) {
@ -351,7 +351,7 @@
z_position = end[Z_AXIS];
}
planner._buffer_line(rx, ry, z_position + z0, e_position, feed_rate, extruder);
planner.buffer_segment(rx, ry, z_position + z0, e_position, feed_rate, extruder);
} //else printf("FIRST MOVE PRUNED ");
}
@ -413,7 +413,7 @@
e_position = end[E_AXIS];
z_position = end[Z_AXIS];
}
planner._buffer_line(rx, next_mesh_line_y, z_position + z0, e_position, feed_rate, extruder);
planner.buffer_segment(rx, next_mesh_line_y, z_position + z0, e_position, feed_rate, extruder);
current_yi += dyi;
yi_cnt--;
}
@ -441,7 +441,7 @@
z_position = end[Z_AXIS];
}
planner._buffer_line(next_mesh_line_x, ry, z_position + z0, e_position, feed_rate, extruder);
planner.buffer_segment(next_mesh_line_x, ry, z_position + z0, e_position, feed_rate, extruder);
current_xi += dxi;
xi_cnt--;
}
@ -465,14 +465,14 @@
#endif
// We don't want additional apply_leveling() performed by regular buffer_line or buffer_line_kinematic,
// so we call _buffer_line directly here. Per-segmented leveling and kinematics performed first.
// so we call buffer_segment directly here. Per-segmented leveling and kinematics performed first.
inline void _O2 ubl_buffer_segment_raw(const float (&raw)[XYZE], const float &fr) {
#if ENABLED(DELTA) // apply delta inverse_kinematics
DELTA_RAW_IK();
planner._buffer_line(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], raw[E_AXIS], fr, active_extruder);
planner.buffer_segment(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], raw[E_AXIS], fr, active_extruder);
#elif IS_SCARA // apply scara inverse_kinematics (should be changed to save raw->logical->raw)
@ -485,11 +485,11 @@
scara_oldB = delta[B_AXIS];
float s_feedrate = max(adiff, bdiff) * scara_feed_factor;
planner._buffer_line(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], raw[E_AXIS], s_feedrate, active_extruder);
planner.buffer_segment(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], raw[E_AXIS], s_feedrate, active_extruder);
#else // CARTESIAN
planner._buffer_line(raw[X_AXIS], raw[Y_AXIS], raw[Z_AXIS], raw[E_AXIS], fr, active_extruder);
planner.buffer_segment(raw[X_AXIS], raw[Y_AXIS], raw[Z_AXIS], raw[E_AXIS], fr, active_extruder);
#endif
}
@ -508,7 +508,7 @@
/**
* Prepare a segmented linear move for DELTA/SCARA/CARTESIAN with UBL and FADE semantics.
* This calls planner._buffer_line multiple times for small incremental moves.
* This calls planner.buffer_segment multiple times for small incremental moves.
* Returns true if did NOT move, false if moved (requires current_position update).
*/

View file

@ -1365,7 +1365,7 @@ void Planner::_buffer_steps(const int32_t (&target)[XYZE], float fr_mm_s, const
} // _buffer_steps()
/**
* Planner::_buffer_line
* Planner::buffer_segment
*
* Add a new linear movement to the buffer in axis units.
*
@ -1375,7 +1375,7 @@ void Planner::_buffer_steps(const int32_t (&target)[XYZE], float fr_mm_s, const
* fr_mm_s - (target) speed of the move
* extruder - target extruder
*/
void Planner::_buffer_line(const float &a, const float &b, const float &c, const float &e, const float &fr_mm_s, const uint8_t extruder) {
void Planner::buffer_segment(const float &a, const float &b, const float &c, const float &e, const float &fr_mm_s, const uint8_t extruder) {
// When changing extruders recalculate steps corresponding to the E position
#if ENABLED(DISTINCT_E_FACTORS)
if (last_extruder != extruder && axis_steps_per_mm[E_AXIS_N] != axis_steps_per_mm[E_AXIS + last_extruder]) {
@ -1394,7 +1394,7 @@ void Planner::_buffer_line(const float &a, const float &b, const float &c, const
};
/* <-- add a slash to enable
SERIAL_ECHOPAIR(" _buffer_line FR:", fr_mm_s);
SERIAL_ECHOPAIR(" buffer_segment FR:", fr_mm_s);
#if IS_KINEMATIC
SERIAL_ECHOPAIR(" A:", a);
SERIAL_ECHOPAIR(" (", position[A_AXIS]);
@ -1441,7 +1441,7 @@ void Planner::_buffer_line(const float &a, const float &b, const float &c, const
stepper.wake_up();
} // _buffer_line()
} // buffer_segment()
/**
* Directly set the planner XYZ position (and stepper positions)

View file

@ -146,7 +146,7 @@ class Planner {
* head!=tail : blocks are in the buffer
* head==(tail-1)%size : the buffer is full
*
* Writer of head is Planner::_buffer_line().
* Writer of head is Planner::buffer_segment().
* Reader of tail is Stepper::isr(). Always consider tail busy / read-only
*/
static block_t block_buffer[BLOCK_BUFFER_SIZE];
@ -379,7 +379,7 @@ class Planner {
static void _buffer_steps(const int32_t (&target)[XYZE], float fr_mm_s, const uint8_t extruder);
/**
* Planner::_buffer_line
* Planner::buffer_segment
*
* Add a new linear movement to the buffer in axis units.
*
@ -389,7 +389,7 @@ class Planner {
* fr_mm_s - (target) speed of the move
* extruder - target extruder
*/
static void _buffer_line(const float &a, const float &b, const float &c, const float &e, const float &fr_mm_s, const uint8_t extruder);
static void buffer_segment(const float &a, const float &b, const float &c, const float &e, const float &fr_mm_s, const uint8_t extruder);
static void _set_position_mm(const float &a, const float &b, const float &c, const float &e);
@ -409,7 +409,7 @@ class Planner {
#if PLANNER_LEVELING && IS_CARTESIAN
apply_leveling(rx, ry, rz);
#endif
_buffer_line(rx, ry, rz, e, fr_mm_s, extruder);
buffer_segment(rx, ry, rz, e, fr_mm_s, extruder);
}
/**
@ -430,9 +430,9 @@ class Planner {
#endif
#if IS_KINEMATIC
inverse_kinematics(raw);
_buffer_line(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], cart[E_AXIS], fr_mm_s, extruder);
buffer_segment(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], cart[E_AXIS], fr_mm_s, extruder);
#else
_buffer_line(raw[X_AXIS], raw[Y_AXIS], raw[Z_AXIS], cart[E_AXIS], fr_mm_s, extruder);
buffer_segment(raw[X_AXIS], raw[Y_AXIS], raw[Z_AXIS], cart[E_AXIS], fr_mm_s, extruder);
#endif
}