Malyan M200 fix E0_AUTO_FAN_PIN (#9580)

Fixes #8794
This commit is contained in:
Scott Lahteine 2018-02-10 20:04:09 -06:00 committed by GitHub
parent 33752de12d
commit 3e384b60ce
Signed by: GitHub
GPG key ID: 4AEE18F83AFDEB23
6 changed files with 50 additions and 31 deletions

View file

@ -106,6 +106,15 @@
*/
#define SERIAL_PORT 0
/**
* Select a secondary serial port on the board to use for communication with the host.
* This allows the connection of wireless adapters (for instance) to non-default port pins.
* Serial port -1 is the USB emulated serial port, if avaialble.
*
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
*/
#define SERIAL_PORT_2 -1
/**
* This setting determines the communication speed of the printer.
*

View file

@ -214,7 +214,7 @@
* Multiple extruders can be assigned to the same pin in which case
* the fan will turn on when any selected extruder is above the threshold.
*/
#define E0_AUTO_FAN_PIN PB8
//#define E0_AUTO_FAN_PIN -1
#define E1_AUTO_FAN_PIN -1
#define E2_AUTO_FAN_PIN -1
#define E3_AUTO_FAN_PIN -1

View file

@ -550,20 +550,40 @@
//
// Assign auto fan pins if needed
//
#if !defined(E0_AUTO_FAN_PIN) && defined(ORIG_E0_AUTO_FAN_PIN)
#define E0_AUTO_FAN_PIN ORIG_E0_AUTO_FAN_PIN
#ifndef E0_AUTO_FAN_PIN
#ifdef ORIG_E0_AUTO_FAN_PIN
#define E0_AUTO_FAN_PIN ORIG_E0_AUTO_FAN_PIN
#else
#define E0_AUTO_FAN_PIN -1
#endif
#endif
#if !defined(E1_AUTO_FAN_PIN) && defined(ORIG_E1_AUTO_FAN_PIN)
#define E1_AUTO_FAN_PIN ORIG_E1_AUTO_FAN_PIN
#ifndef E1_AUTO_FAN_PIN
#ifdef ORIG_E1_AUTO_FAN_PIN
#define E1_AUTO_FAN_PIN ORIG_E1_AUTO_FAN_PIN
#else
#define E1_AUTO_FAN_PIN -1
#endif
#endif
#if !defined(E2_AUTO_FAN_PIN) && defined(ORIG_E2_AUTO_FAN_PIN)
#define E2_AUTO_FAN_PIN ORIG_E2_AUTO_FAN_PIN
#ifndef E2_AUTO_FAN_PIN
#ifdef ORIG_E2_AUTO_FAN_PIN
#define E2_AUTO_FAN_PIN ORIG_E2_AUTO_FAN_PIN
#else
#define E2_AUTO_FAN_PIN -1
#endif
#endif
#if !defined(E3_AUTO_FAN_PIN) && defined(ORIG_E3_AUTO_FAN_PIN)
#define E3_AUTO_FAN_PIN ORIG_E3_AUTO_FAN_PIN
#ifndef E3_AUTO_FAN_PIN
#ifdef ORIG_E3_AUTO_FAN_PIN
#define E3_AUTO_FAN_PIN ORIG_E3_AUTO_FAN_PIN
#else
#define E3_AUTO_FAN_PIN -1
#endif
#endif
#if !defined(E4_AUTO_FAN_PIN) && defined(ORIG_E4_AUTO_FAN_PIN)
#define E4_AUTO_FAN_PIN ORIG_E4_AUTO_FAN_PIN
#ifndef E4_AUTO_FAN_PIN
#ifdef ORIG_E4_AUTO_FAN_PIN
#define E4_AUTO_FAN_PIN ORIG_E4_AUTO_FAN_PIN
#else
#define E4_AUTO_FAN_PIN -1
#endif
#endif
// List of pins which to ignore when asked to change by gcode, 0 and 1 are RX and TX, do not mess with those!

View file

@ -79,8 +79,10 @@
// This board has only the controller fan and the extruder fan
// If someone hacks to put a direct power fan on the controller, PB3 could
// be used as a separate print cooling fan.
// FAN_PIN is commented out because in configuration_adv, we have
// it set to E0_AUTO_FAN_PIN
// #define FAN_PIN PB8 // FAN1 header on board - PRINT FAN
#define ORIG_E0_AUTO_FAN_PIN PB8
// FAN_PIN is commented out here because the M200 example
// Configuration_adv.h does NOT override E0_AUTO_FAN_PIN.
//#define FAN_PIN PB8 // FAN1 header on board - PRINT FAN
#define FAN1_PIN PB3 // FAN2 header on board - CONTROLLER FAN
#define FAN2_PIN -1 // FAN3 header on board - EXTRUDER0 FAN

View file

@ -1,4 +1,4 @@
/*
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -60,7 +60,7 @@
#define HEATER_0_PIN 7
#define E0_AUTO_FAN_PIN 3
#define ORIG_E0_AUTO_FAN_PIN 3 // Use this by NOT overriding E0_AUTO_FAN_PIN
#define CONTROLLER_FAN_PIN 2
#define TEMP_0_PIN 7 // Analog Input

View file

@ -48,7 +48,6 @@
#define _STM32_PIN(_PORT,_PIN) ((_PORT * 16) + _PIN)
//
// Limit Switches
//
@ -60,6 +59,7 @@
#define Z_MAX_PIN _STM32_PIN(PORTG, 0)
#define E_MIN_PIN _STM32_PIN(PORTE, 2)
#define E_MAX_PIN _STM32_PIN(PORTE, 3)
//
// Z Probe (when not Z_MIN_PIN)
//
@ -70,7 +70,6 @@
//
// Steppers
//
#define STEPPER_ENABLE_PIN _STM32_PIN(PORTE, 0)
#define X_STEP_PIN _STM32_PIN(PORTC, 6) //96, 39 in arduino
@ -106,11 +105,6 @@
#define Z2_ENABLE_PIN _STM32_PIN(PORTC, 15)
#define SCK_PIN _STM32_PIN(PORTA, 5)
#define MISO_PIN _STM32_PIN(PORTA, 6)
#define MOSI_PIN _STM32_PIN(PORTA, 7)
@ -123,9 +117,6 @@
#define SPI6_MISO_PIN _STM32_PIN(PORTG, 12)
#define SPI6_MOSI_PIN _STM32_PIN(PORTG, 14)
//
// Temperature Sensors
//
@ -139,7 +130,6 @@
#define TEMP_5_PIN _STM32_PIN(PORTE, 12) // Analog Input, Probe temp
//
// Heaters / Fans
//
@ -151,7 +141,7 @@
#define FAN1_PIN _STM32_PIN(PORTA, 0)
#define FAN2_PIN _STM32_PIN(PORTA, 1)
//#define E0_AUTO_FAN_PIN _STM32_PIN(PORTA, 1)
#define ORIG_E0_AUTO_FAN_PIN _STM32_PIN(PORTA, 1) // Use this by NOT overriding E0_AUTO_FAN_PIN
//
// Misc. Functions
@ -184,14 +174,12 @@
#define PWR_LOSS _STM32_PIN(PORTG, 5) //Power loss / nAC_FAULT
//
//MAX7219_DEBUG
// MAX7219_DEBUG
//
#define MAX7219_CLK_PIN _STM32_PIN(PORTG, 10) //EXP1-1
#define MAX7219_DIN_PIN _STM32_PIN(PORTD, 7) //EXP1-3
#define MAX7219_LOAD_PIN _STM32_PIN(PORTD, 1) //EXP1-5
//#define NEOPIXEL_PIN 4
//
// LCD / Controller
//