Merge pull request #383 from dob71/jeff

Hotend offset handling for multi-extruder machines
This commit is contained in:
daid 2013-02-27 03:10:18 -08:00
commit 3e9cd334a4
4 changed files with 1542 additions and 1460 deletions

View file

@ -286,7 +286,13 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th
#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E max acceleration in mm/s^2 for printing moves #define DEFAULT_ACCELERATION 3000 // X, Y, Z and E max acceleration in mm/s^2 for printing moves
#define DEFAULT_RETRACT_ACCELERATION 3000 // X, Y, Z and E max acceleration in mm/s^2 for r retracts #define DEFAULT_RETRACT_ACCELERATION 3000 // X, Y, Z and E max acceleration in mm/s^2 for r retracts
// // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
// For the other hotends it is their distance from the extruder 0 hotend.
// #define EXTRUDER_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis
// #define EXTRUDER_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis
// The speed change that does not require acceleration (i.e. the software might assume it can be done instanteneously)
#define DEFAULT_XYJERK 20.0 // (mm/sec) #define DEFAULT_XYJERK 20.0 // (mm/sec)
#define DEFAULT_ZJERK 0.4 // (mm/sec) #define DEFAULT_ZJERK 0.4 // (mm/sec)
#define DEFAULT_EJERK 5.0 // (mm/sec) #define DEFAULT_EJERK 5.0 // (mm/sec)

View file

@ -113,6 +113,7 @@
// M207 - set retract length S[positive mm] F[feedrate mm/sec] Z[additional zlift/hop] // M207 - set retract length S[positive mm] F[feedrate mm/sec] Z[additional zlift/hop]
// M208 - set recover=unretract length S[positive mm surplus to the M207 S*] F[feedrate mm/sec] // M208 - set recover=unretract length S[positive mm surplus to the M207 S*] F[feedrate mm/sec]
// M209 - S<1=true/0=false> enable automatic retract detect if the slicer did not support G10/11: every normal extrude-only move will be classified as retract depending on the direction. // M209 - S<1=true/0=false> enable automatic retract detect if the slicer did not support G10/11: every normal extrude-only move will be classified as retract depending on the direction.
// M218 - set hotend offset (in mm): T<extruder_number> X<offset_on_X> Y<offset_on_Y>
// M220 S<factor in percent>- set speed factor override percentage // M220 S<factor in percent>- set speed factor override percentage
// M221 S<factor in percent>- set extrude factor override percentage // M221 S<factor in percent>- set extrude factor override percentage
// M240 - Trigger a camera to take a photograph // M240 - Trigger a camera to take a photograph
@ -124,7 +125,7 @@
// M500 - stores paramters in EEPROM // M500 - stores paramters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// M503 - print the current settings (from memory not from eeprom) // M503 - print the current settings (from memory not from eeprom)
// M540 - Use S[0|1] to enable or disable the stop SD card print on endstop hit (requires ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) // M540 - Use S[0|1] to enable or disable the stop SD card print on endstop hit (requires ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED)
// M600 - Pause for filament change X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal] // M600 - Pause for filament change X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal]
// M907 - Set digital trimpot motor current using axis codes. // M907 - Set digital trimpot motor current using axis codes.
@ -155,6 +156,12 @@ float current_position[NUM_AXIS] = { 0.0, 0.0, 0.0, 0.0 };
float add_homeing[3]={0,0,0}; float add_homeing[3]={0,0,0};
float min_pos[3] = { X_MIN_POS, Y_MIN_POS, Z_MIN_POS }; float min_pos[3] = { X_MIN_POS, Y_MIN_POS, Z_MIN_POS };
float max_pos[3] = { X_MAX_POS, Y_MAX_POS, Z_MAX_POS }; float max_pos[3] = { X_MAX_POS, Y_MAX_POS, Z_MAX_POS };
// Extruder offset, only in XY plane
float extruder_offset[2][EXTRUDERS] = {
#if defined(EXTRUDER_OFFSET_X) && defined(EXTRUDER_OFFSET_Y)
EXTRUDER_OFFSET_X, EXTRUDER_OFFSET_Y
#endif
};
uint8_t active_extruder = 0; uint8_t active_extruder = 0;
int fanSpeed=0; int fanSpeed=0;
@ -1353,7 +1360,6 @@ void process_commands()
retract_recover_feedrate = code_value() ; retract_recover_feedrate = code_value() ;
} }
}break; }break;
case 209: // M209 - S<1=true/0=false> enable automatic retract detect if the slicer did not support G10/11: every normal extrude-only move will be classified as retract depending on the direction. case 209: // M209 - S<1=true/0=false> enable automatic retract detect if the slicer did not support G10/11: every normal extrude-only move will be classified as retract depending on the direction.
{ {
if(code_seen('S')) if(code_seen('S'))
@ -1372,7 +1378,31 @@ void process_commands()
} }
}break; }break;
#endif #endif // FWRETRACT
case 218: // M218 - set hotend offset (in mm), T<extruder_number> X<offset_on_X> Y<offset_on_Y>
{
if(setTargetedHotend(218)){
break;
}
if(code_seen('X'))
{
extruder_offset[X_AXIS][tmp_extruder] = code_value();
}
if(code_seen('Y'))
{
extruder_offset[Y_AXIS][tmp_extruder] = code_value();
}
SERIAL_ECHO_START;
SERIAL_ECHOPGM(MSG_HOTEND_OFFSET);
for(tmp_extruder = 0; tmp_extruder < EXTRUDERS; tmp_extruder++)
{
SERIAL_ECHO(" ");
SERIAL_ECHO(extruder_offset[X_AXIS][tmp_extruder]);
SERIAL_ECHO(",");
SERIAL_ECHO(extruder_offset[Y_AXIS][tmp_extruder]);
}
SERIAL_ECHOLN("");
}break;
case 220: // M220 S<factor in percent>- set speed factor override percentage case 220: // M220 S<factor in percent>- set speed factor override percentage
{ {
if(code_seen('S')) if(code_seen('S'))
@ -1499,13 +1529,13 @@ void process_commands()
{ {
Config_PrintSettings(); Config_PrintSettings();
} }
break; break;
#ifdef ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED #ifdef ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
case 540: case 540:
{ {
if(code_seen('S')) abort_on_endstop_hit = code_value() > 0; if(code_seen('S')) abort_on_endstop_hit = code_value() > 0;
} }
break; break;
#endif #endif
#ifdef FILAMENTCHANGEENABLE #ifdef FILAMENTCHANGEENABLE
case 600: //Pause for filament change X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal] case 600: //Pause for filament change X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal]
@ -1696,7 +1726,32 @@ void process_commands()
SERIAL_ECHOLN(MSG_INVALID_EXTRUDER); SERIAL_ECHOLN(MSG_INVALID_EXTRUDER);
} }
else { else {
active_extruder = tmp_extruder; boolean make_move = false;
if(code_seen('F')) {
make_move = true;
next_feedrate = code_value();
if(next_feedrate > 0.0) {
feedrate = next_feedrate;
}
}
if(tmp_extruder != active_extruder) {
// Save current position to return to after applying extruder offset
memcpy(destination, current_position, sizeof(destination));
// Offset extruder (only by XY)
int i;
for(i = 0; i < 2; i++) {
current_position[i] = current_position[i] -
extruder_offset[i][active_extruder] +
extruder_offset[i][tmp_extruder];
}
// Set the new active extruder and position
active_extruder = tmp_extruder;
plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
// Move to the old position if 'F' was in the parameters
if(make_move && Stopped == false) {
prepare_move();
}
}
SERIAL_ECHO_START; SERIAL_ECHO_START;
SERIAL_ECHO(MSG_ACTIVE_EXTRUDER); SERIAL_ECHO(MSG_ACTIVE_EXTRUDER);
SERIAL_PROTOCOLLN((int)active_extruder); SERIAL_PROTOCOLLN((int)active_extruder);
@ -2059,6 +2114,9 @@ bool setTargetedHotend(int code){
case 109: case 109:
SERIAL_ECHO(MSG_M109_INVALID_EXTRUDER); SERIAL_ECHO(MSG_M109_INVALID_EXTRUDER);
break; break;
case 218:
SERIAL_ECHO(MSG_M218_INVALID_EXTRUDER);
break;
} }
SERIAL_ECHOLN(tmp_extruder); SERIAL_ECHOLN(tmp_extruder);
return true; return true;

View file

@ -1,1446 +1,1464 @@
#ifndef LANGUAGE_H #ifndef LANGUAGE_H
#define LANGUAGE_H #define LANGUAGE_H
// NOTE: IF YOU CHANGE THIS FILE / MERGE THIS FILE WITH CHANGES // NOTE: IF YOU CHANGE THIS FILE / MERGE THIS FILE WITH CHANGES
// //
// ==> ALWAYS TRY TO COMPILE MARLIN WITH/WITHOUT "ULTIPANEL" / "ULTRALCD" / "SDSUPPORT" #define IN "Configuration.h" // ==> ALWAYS TRY TO COMPILE MARLIN WITH/WITHOUT "ULTIPANEL" / "ULTRALCD" / "SDSUPPORT" #define IN "Configuration.h"
// ==> ALSO TRY ALL AVAILABLE "LANGUAGE_CHOICE" OPTIONS // ==> ALSO TRY ALL AVAILABLE "LANGUAGE_CHOICE" OPTIONS
// Languages // Languages
// 1 English // 1 English
// 2 Polish // 2 Polish
// 3 French (awaiting translation!) // 3 French (awaiting translation!)
// 4 German // 4 German
// 5 Spanish // 5 Spanish
// 6 Russian // 6 Russian
// 7 Italian // 7 Italian
// 8 Portuguese // 8 Portuguese
// 9 Finnish // 9 Finnish
#ifndef LANGUAGE_CHOICE #ifndef LANGUAGE_CHOICE
#define LANGUAGE_CHOICE 1 // Pick your language from the list above #define LANGUAGE_CHOICE 1 // Pick your language from the list above
#endif #endif
#define PROTOCOL_VERSION "1.0" #define PROTOCOL_VERSION "1.0"
#if MOTHERBOARD == 7 || MOTHERBOARD == 71 #if MOTHERBOARD == 7 || MOTHERBOARD == 71
#define MACHINE_NAME "Ultimaker" #define MACHINE_NAME "Ultimaker"
#define FIRMWARE_URL "http://firmware.ultimaker.com" #define FIRMWARE_URL "http://firmware.ultimaker.com"
#else #else
#define MACHINE_NAME "Mendel" #define MACHINE_NAME "Mendel"
#define FIRMWARE_URL "http://www.mendel-parts.com" #define FIRMWARE_URL "http://www.mendel-parts.com"
#endif #endif
#define STRINGIFY_(n) #n #define STRINGIFY_(n) #n
#define STRINGIFY(n) STRINGIFY_(n) #define STRINGIFY(n) STRINGIFY_(n)
#if LANGUAGE_CHOICE == 1 #if LANGUAGE_CHOICE == 1
// LCD Menu Messages // LCD Menu Messages
#define WELCOME_MSG MACHINE_NAME " Ready." #define WELCOME_MSG MACHINE_NAME " Ready."
#define MSG_SD_INSERTED "Card inserted" #define MSG_SD_INSERTED "Card inserted"
#define MSG_SD_REMOVED "Card removed" #define MSG_SD_REMOVED "Card removed"
#define MSG_MAIN "Main" #define MSG_MAIN "Main"
#define MSG_AUTOSTART "Autostart" #define MSG_AUTOSTART "Autostart"
#define MSG_DISABLE_STEPPERS "Disable Steppers" #define MSG_DISABLE_STEPPERS "Disable Steppers"
#define MSG_AUTO_HOME "Auto Home" #define MSG_AUTO_HOME "Auto Home"
#define MSG_SET_ORIGIN "Set Origin" #define MSG_SET_ORIGIN "Set Origin"
#define MSG_PREHEAT_PLA "Preheat PLA" #define MSG_PREHEAT_PLA "Preheat PLA"
#define MSG_PREHEAT_PLA_SETTINGS "Preheat PLA Conf" #define MSG_PREHEAT_PLA_SETTINGS "Preheat PLA Conf"
#define MSG_PREHEAT_ABS "Preheat ABS" #define MSG_PREHEAT_ABS "Preheat ABS"
#define MSG_PREHEAT_ABS_SETTINGS "Preheat ABS Conf" #define MSG_PREHEAT_ABS_SETTINGS "Preheat ABS Conf"
#define MSG_COOLDOWN "Cooldown" #define MSG_COOLDOWN "Cooldown"
#define MSG_EXTRUDE "Extrude" #define MSG_EXTRUDE "Extrude"
#define MSG_RETRACT "Retract" #define MSG_RETRACT "Retract"
#define MSG_MOVE_AXIS "Move Axis" #define MSG_MOVE_AXIS "Move Axis"
#define MSG_SPEED "Speed" #define MSG_SPEED "Speed"
#define MSG_NOZZLE "Nozzle" #define MSG_NOZZLE "Nozzle"
#define MSG_NOZZLE1 "Nozzle2" #define MSG_NOZZLE1 "Nozzle2"
#define MSG_NOZZLE2 "Nozzle3" #define MSG_NOZZLE2 "Nozzle3"
#define MSG_BED "Bed" #define MSG_BED "Bed"
#define MSG_FAN_SPEED "Fan speed" #define MSG_FAN_SPEED "Fan speed"
#define MSG_FLOW "Flow" #define MSG_FLOW "Flow"
#define MSG_CONTROL "Control" #define MSG_CONTROL "Control"
#define MSG_MIN " \002 Min" #define MSG_MIN " \002 Min"
#define MSG_MAX " \002 Max" #define MSG_MAX " \002 Max"
#define MSG_FACTOR " \002 Fact" #define MSG_FACTOR " \002 Fact"
#define MSG_AUTOTEMP "Autotemp" #define MSG_AUTOTEMP "Autotemp"
#define MSG_ON "On " #define MSG_ON "On "
#define MSG_OFF "Off" #define MSG_OFF "Off"
#define MSG_PID_P "PID-P" #define MSG_PID_P "PID-P"
#define MSG_PID_I "PID-I" #define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D" #define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C" #define MSG_PID_C "PID-C"
#define MSG_ACC "Accel" #define MSG_ACC "Accel"
#define MSG_VXY_JERK "Vxy-jerk" #define MSG_VXY_JERK "Vxy-jerk"
#define MSG_VMAX "Vmax " #define MSG_VMAX "Vmax "
#define MSG_X "x" #define MSG_X "x"
#define MSG_Y "y" #define MSG_Y "y"
#define MSG_Z "z" #define MSG_Z "z"
#define MSG_E "e" #define MSG_E "e"
#define MSG_VMIN "Vmin" #define MSG_VMIN "Vmin"
#define MSG_VTRAV_MIN "VTrav min" #define MSG_VTRAV_MIN "VTrav min"
#define MSG_AMAX "Amax " #define MSG_AMAX "Amax "
#define MSG_A_RETRACT "A-retract" #define MSG_A_RETRACT "A-retract"
#define MSG_XSTEPS "Xsteps/mm" #define MSG_XSTEPS "Xsteps/mm"
#define MSG_YSTEPS "Ysteps/mm" #define MSG_YSTEPS "Ysteps/mm"
#define MSG_ZSTEPS "Zsteps/mm" #define MSG_ZSTEPS "Zsteps/mm"
#define MSG_ESTEPS "Esteps/mm" #define MSG_ESTEPS "Esteps/mm"
#define MSG_RECTRACT "Rectract" #define MSG_RECTRACT "Rectract"
#define MSG_TEMPERATURE "Temperature" #define MSG_TEMPERATURE "Temperature"
#define MSG_MOTION "Motion" #define MSG_MOTION "Motion"
#define MSG_STORE_EPROM "Store memory" #define MSG_STORE_EPROM "Store memory"
#define MSG_LOAD_EPROM "Load memory" #define MSG_LOAD_EPROM "Load memory"
#define MSG_RESTORE_FAILSAFE "Restore Failsafe" #define MSG_RESTORE_FAILSAFE "Restore Failsafe"
#define MSG_REFRESH "Refresh" #define MSG_REFRESH "Refresh"
#define MSG_WATCH "Watch" #define MSG_WATCH "Watch"
#define MSG_PREPARE "Prepare" #define MSG_PREPARE "Prepare"
#define MSG_TUNE "Tune" #define MSG_TUNE "Tune"
#define MSG_PAUSE_PRINT "Pause Print" #define MSG_PAUSE_PRINT "Pause Print"
#define MSG_RESUME_PRINT "Resume Print" #define MSG_RESUME_PRINT "Resume Print"
#define MSG_STOP_PRINT "Stop Print" #define MSG_STOP_PRINT "Stop Print"
#define MSG_CARD_MENU "Card Menu" #define MSG_CARD_MENU "Card Menu"
#define MSG_NO_CARD "No Card" #define MSG_NO_CARD "No Card"
#define MSG_DWELL "Sleep..." #define MSG_DWELL "Sleep..."
#define MSG_USERWAIT "Wait for user..." #define MSG_USERWAIT "Wait for user..."
#define MSG_RESUMING "Resuming print" #define MSG_RESUMING "Resuming print"
#define MSG_NO_MOVE "No move." #define MSG_NO_MOVE "No move."
#define MSG_KILLED "KILLED. " #define MSG_KILLED "KILLED. "
#define MSG_STOPPED "STOPPED. " #define MSG_STOPPED "STOPPED. "
#define MSG_CONTROL_RETRACT "Retract mm" #define MSG_CONTROL_RETRACT "Retract mm"
#define MSG_CONTROL_RETRACTF "Retract F" #define MSG_CONTROL_RETRACTF "Retract F"
#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm" #define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm" #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet F" #define MSG_CONTROL_RETRACT_RECOVERF "UnRet F"
#define MSG_AUTORETRACT "AutoRetr." #define MSG_AUTORETRACT "AutoRetr."
#define MSG_FILAMENTCHANGE "Change filament" #define MSG_FILAMENTCHANGE "Change filament"
#define MSG_INIT_SDCARD "Init. SD-Card" #define MSG_INIT_SDCARD "Init. SD-Card"
#define MSG_CNG_SDCARD "Change SD-Card" #define MSG_CNG_SDCARD "Change SD-Card"
// Serial Console Messages // Serial Console Messages
#define MSG_Enqueing "enqueing \"" #define MSG_Enqueing "enqueing \""
#define MSG_POWERUP "PowerUp" #define MSG_POWERUP "PowerUp"
#define MSG_EXTERNAL_RESET " External Reset" #define MSG_EXTERNAL_RESET " External Reset"
#define MSG_BROWNOUT_RESET " Brown out Reset" #define MSG_BROWNOUT_RESET " Brown out Reset"
#define MSG_WATCHDOG_RESET " Watchdog Reset" #define MSG_WATCHDOG_RESET " Watchdog Reset"
#define MSG_SOFTWARE_RESET " Software Reset" #define MSG_SOFTWARE_RESET " Software Reset"
#define MSG_MARLIN "Marlin " #define MSG_MARLIN "Marlin "
#define MSG_AUTHOR " | Author: " #define MSG_AUTHOR " | Author: "
#define MSG_CONFIGURATION_VER " Last Updated: " #define MSG_CONFIGURATION_VER " Last Updated: "
#define MSG_FREE_MEMORY " Free Memory: " #define MSG_FREE_MEMORY " Free Memory: "
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
#define MSG_OK "ok" #define MSG_OK "ok"
#define MSG_FILE_SAVED "Done saving file." #define MSG_FILE_SAVED "Done saving file."
#define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line: " #define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line: "
#define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line: " #define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line: "
#define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line: " #define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line: "
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line: " #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line: "
#define MSG_FILE_PRINTED "Done printing file" #define MSG_FILE_PRINTED "Done printing file"
#define MSG_BEGIN_FILE_LIST "Begin file list" #define MSG_BEGIN_FILE_LIST "Begin file list"
#define MSG_END_FILE_LIST "End file list" #define MSG_END_FILE_LIST "End file list"
#define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder " #define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
#define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder " #define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
#define MSG_ERR_NO_THERMISTORS "No thermistors - no temperature" #define MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder "
#define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder " #define MSG_ERR_NO_THERMISTORS "No thermistors - no temperature"
#define MSG_HEATING "Heating..." #define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
#define MSG_HEATING_COMPLETE "Heating done." #define MSG_HEATING "Heating..."
#define MSG_BED_HEATING "Bed Heating." #define MSG_HEATING_COMPLETE "Heating done."
#define MSG_BED_DONE "Bed done." #define MSG_BED_HEATING "Bed Heating."
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" #define MSG_BED_DONE "Bed done."
#define MSG_COUNT_X " Count X: " #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
#define MSG_ERR_KILLED "Printer halted. kill() called!" #define MSG_COUNT_X " Count X: "
#define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)" #define MSG_ERR_KILLED "Printer halted. kill() called!"
#define MSG_RESEND "Resend: " #define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
#define MSG_UNKNOWN_COMMAND "Unknown command: \"" #define MSG_RESEND "Resend: "
#define MSG_ACTIVE_EXTRUDER "Active Extruder: " #define MSG_UNKNOWN_COMMAND "Unknown command: \""
#define MSG_INVALID_EXTRUDER "Invalid extruder" #define MSG_ACTIVE_EXTRUDER "Active Extruder: "
#define MSG_X_MIN "x_min: " #define MSG_INVALID_EXTRUDER "Invalid extruder"
#define MSG_X_MAX "x_max: " #define MSG_X_MIN "x_min: "
#define MSG_Y_MIN "y_min: " #define MSG_X_MAX "x_max: "
#define MSG_Y_MAX "y_max: " #define MSG_Y_MIN "y_min: "
#define MSG_Z_MIN "z_min: " #define MSG_Y_MAX "y_max: "
#define MSG_Z_MAX "z_max: " #define MSG_Z_MIN "z_min: "
#define MSG_M119_REPORT "Reporting endstop status" #define MSG_Z_MAX "z_max: "
#define MSG_ENDSTOP_HIT "TRIGGERED" #define MSG_M119_REPORT "Reporting endstop status"
#define MSG_ENDSTOP_OPEN "open" #define MSG_ENDSTOP_HIT "TRIGGERED"
#define MSG_ENDSTOP_OPEN "open"
#define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir" #define MSG_HOTEND_OFFSET "Hotend offsets:"
#define MSG_SD_INIT_FAIL "SD init fail"
#define MSG_SD_VOL_INIT_FAIL "volume.init failed" #define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
#define MSG_SD_OPENROOT_FAIL "openRoot failed" #define MSG_SD_INIT_FAIL "SD init fail"
#define MSG_SD_CARD_OK "SD card ok" #define MSG_SD_VOL_INIT_FAIL "volume.init failed"
#define MSG_SD_WORKDIR_FAIL "workDir open failed" #define MSG_SD_OPENROOT_FAIL "openRoot failed"
#define MSG_SD_OPEN_FILE_FAIL "open failed, File: " #define MSG_SD_CARD_OK "SD card ok"
#define MSG_SD_FILE_OPENED "File opened: " #define MSG_SD_WORKDIR_FAIL "workDir open failed"
#define MSG_SD_SIZE " Size: " #define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
#define MSG_SD_FILE_SELECTED "File selected" #define MSG_SD_FILE_OPENED "File opened: "
#define MSG_SD_WRITE_TO_FILE "Writing to file: " #define MSG_SD_SIZE " Size: "
#define MSG_SD_PRINTING_BYTE "SD printing byte " #define MSG_SD_FILE_SELECTED "File selected"
#define MSG_SD_NOT_PRINTING "Not SD printing" #define MSG_SD_WRITE_TO_FILE "Writing to file: "
#define MSG_SD_ERR_WRITE_TO_FILE "error writing to file" #define MSG_SD_PRINTING_BYTE "SD printing byte "
#define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir: " #define MSG_SD_NOT_PRINTING "Not SD printing"
#define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
#define MSG_STEPPER_TO_HIGH "Steprate to high: " #define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir: "
#define MSG_ENDSTOPS_HIT "endstops hit: "
#define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented" #define MSG_STEPPER_TO_HIGH "Steprate to high: "
#define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented" #define MSG_ENDSTOPS_HIT "endstops hit: "
#define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
#endif #define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"
#endif
#if LANGUAGE_CHOICE == 2
// LCD Menu Messages #if LANGUAGE_CHOICE == 2
#define WELCOME_MSG MACHINE_NAME " Gotowe."
#define MSG_SD_INSERTED "Karta wlozona" // LCD Menu Messages
#define MSG_SD_REMOVED "Karta usunieta" #define WELCOME_MSG MACHINE_NAME " Gotowe."
#define MSG_MAIN "Main" #define MSG_SD_INSERTED "Karta wlozona"
#define MSG_AUTOSTART "Autostart" #define MSG_SD_REMOVED "Karta usunieta"
#define MSG_DISABLE_STEPPERS "Wylacz silniki" #define MSG_MAIN "Main"
#define MSG_AUTO_HOME "Auto. poz. zerowa" #define MSG_AUTOSTART "Autostart"
#define MSG_SET_ORIGIN "Ustaw punkt zerowy" #define MSG_DISABLE_STEPPERS "Wylacz silniki"
#define MSG_PREHEAT_PLA "Rozgrzej PLA" #define MSG_AUTO_HOME "Auto. poz. zerowa"
#define MSG_PREHEAT_PLA_SETTINGS "Ustawienia roz. PLA" #define MSG_SET_ORIGIN "Ustaw punkt zerowy"
#define MSG_PREHEAT_ABS "Rozgrzej ABS" #define MSG_PREHEAT_PLA "Rozgrzej PLA"
#define MSG_PREHEAT_ABS_SETTINGS "Ustawienia roz. ABS" #define MSG_PREHEAT_PLA_SETTINGS "Ustawienia roz. PLA"
#define MSG_COOLDOWN "Chlodzenie" #define MSG_PREHEAT_ABS "Rozgrzej ABS"
#define MSG_EXTRUDE "Ekstruzja" #define MSG_PREHEAT_ABS_SETTINGS "Ustawienia roz. ABS"
#define MSG_RETRACT "Cofanie" #define MSG_COOLDOWN "Chlodzenie"
#define MSG_MOVE_AXIS "Ruch osi" #define MSG_EXTRUDE "Ekstruzja"
#define MSG_SPEED "Predkosc" #define MSG_RETRACT "Cofanie"
#define MSG_NOZZLE "Dysza" #define MSG_MOVE_AXIS "Ruch osi"
#define MSG_NOZZLE1 "Dysza2" #define MSG_SPEED "Predkosc"
#define MSG_NOZZLE2 "Dysza3" #define MSG_NOZZLE "Dysza"
#define MSG_BED "Loze" #define MSG_NOZZLE1 "Dysza2"
#define MSG_FAN_SPEED "Obroty wiatraka" #define MSG_NOZZLE2 "Dysza3"
#define MSG_FLOW "Przeplyw" #define MSG_BED "Loze"
#define MSG_CONTROL "Kontrola" #define MSG_FAN_SPEED "Obroty wiatraka"
#define MSG_MIN " \002 Min" #define MSG_FLOW "Przeplyw"
#define MSG_MAX " \002 Max" #define MSG_CONTROL "Kontrola"
#define MSG_FACTOR " \002 Mnoznik" #define MSG_MIN " \002 Min"
#define MSG_AUTOTEMP "Auto. temp." #define MSG_MAX " \002 Max"
#define MSG_ON "Wl. " #define MSG_FACTOR " \002 Mnoznik"
#define MSG_OFF "Wyl." #define MSG_AUTOTEMP "Auto. temp."
#define MSG_PID_P "PID-P" #define MSG_ON "Wl. "
#define MSG_PID_I "PID-I" #define MSG_OFF "Wyl."
#define MSG_PID_D "PID-D" #define MSG_PID_P "PID-P"
#define MSG_PID_C "PID-C" #define MSG_PID_I "PID-I"
#define MSG_ACC "Acc" #define MSG_PID_D "PID-D"
#define MSG_VXY_JERK "Zryw Vxy" #define MSG_PID_C "PID-C"
#define MSG_VMAX "Vmax" #define MSG_ACC "Acc"
#define MSG_X "x" #define MSG_VXY_JERK "Zryw Vxy"
#define MSG_Y "y" #define MSG_VMAX "Vmax"
#define MSG_Z "z" #define MSG_X "x"
#define MSG_E "e" #define MSG_Y "y"
#define MSG_VMIN "Vmin" #define MSG_Z "z"
#define MSG_VTRAV_MIN "Vskok min" #define MSG_E "e"
#define MSG_AMAX "Amax" #define MSG_VMIN "Vmin"
#define MSG_A_RETRACT "A-wycofanie" #define MSG_VTRAV_MIN "Vskok min"
#define MSG_XSTEPS "krokiX/mm" #define MSG_AMAX "Amax"
#define MSG_YSTEPS "krokiY/mm" #define MSG_A_RETRACT "A-wycofanie"
#define MSG_ZSTEPS "krokiZ/mm" #define MSG_XSTEPS "krokiX/mm"
#define MSG_ESTEPS "krokiE/mm" #define MSG_YSTEPS "krokiY/mm"
#define MSG_RECTRACT "Wycofanie" #define MSG_ZSTEPS "krokiZ/mm"
#define MSG_TEMPERATURE "Temperatura" #define MSG_ESTEPS "krokiE/mm"
#define MSG_MOTION "Ruch" #define MSG_RECTRACT "Wycofanie"
#define MSG_STORE_EPROM "Zapisz w pamieci" #define MSG_TEMPERATURE "Temperatura"
#define MSG_LOAD_EPROM "Wczytaj z pamieci" #define MSG_MOTION "Ruch"
#define MSG_RESTORE_FAILSAFE " Ustawienia fabryczne" #define MSG_STORE_EPROM "Zapisz w pamieci"
#define MSG_REFRESH "\004Odswiez" #define MSG_LOAD_EPROM "Wczytaj z pamieci"
#define MSG_WATCH "Obserwuj" #define MSG_RESTORE_FAILSAFE " Ustawienia fabryczne"
#define MSG_PREPARE "Przygotuj" #define MSG_REFRESH "\004Odswiez"
#define MSG_CONTROL "Kontroluj" #define MSG_WATCH "Obserwuj"
#define MSG_TUNE "Strojenie" #define MSG_PREPARE "Przygotuj"
#define MSG_PAUSE_PRINT "Pauza" #define MSG_CONTROL "Kontroluj"
#define MSG_RESUME_PRINT "Wznowienie" #define MSG_TUNE "Strojenie"
#define MSG_STOP_PRINT "Stop" #define MSG_PAUSE_PRINT "Pauza"
#define MSG_CARD_MENU "Menu SDCard" #define MSG_RESUME_PRINT "Wznowienie"
#define MSG_NO_CARD "Brak karty" #define MSG_STOP_PRINT "Stop"
#define MSG_DWELL "Uspij..." #define MSG_CARD_MENU "Menu SDCard"
#define MSG_USERWAIT "Czekaj na uzytkownika..." #define MSG_NO_CARD "Brak karty"
#define MSG_RESUMING "Wznawiam drukowanie" #define MSG_DWELL "Uspij..."
#define MSG_NO_MOVE "Brak ruchu." #define MSG_USERWAIT "Czekaj na uzytkownika..."
#define MSG_PART_RELEASE "Czesciowe zwolnienie" #define MSG_RESUMING "Wznawiam drukowanie"
#define MSG_KILLED "Ubity. " #define MSG_NO_MOVE "Brak ruchu."
#define MSG_STOPPED "Zatrzymany. " #define MSG_PART_RELEASE "Czesciowe zwolnienie"
#define MSG_STEPPER_RELEASED "Zwolniony." #define MSG_KILLED "Ubity. "
#define MSG_CONTROL_RETRACT "Wycofaj mm" #define MSG_STOPPED "Zatrzymany. "
#define MSG_CONTROL_RETRACTF "Wycofaj F" #define MSG_STEPPER_RELEASED "Zwolniony."
#define MSG_CONTROL_RETRACT_ZLIFT "Skok Z mm:" #define MSG_CONTROL_RETRACT "Wycofaj mm"
#define MSG_CONTROL_RETRACT_RECOVER "Cof. wycof. +mm" #define MSG_CONTROL_RETRACTF "Wycofaj F"
#define MSG_CONTROL_RETRACT_RECOVERF "Cof. wycof. F" #define MSG_CONTROL_RETRACT_ZLIFT "Skok Z mm:"
#define MSG_AUTORETRACT "Auto. wycofanie" #define MSG_CONTROL_RETRACT_RECOVER "Cof. wycof. +mm"
#define MSG_FILAMENTCHANGE "Change filament" #define MSG_CONTROL_RETRACT_RECOVERF "Cof. wycof. F"
#define MSG_AUTORETRACT "Auto. wycofanie"
// Serial Console Messages #define MSG_FILAMENTCHANGE "Change filament"
#define MSG_Enqueing "Kolejkowanie \"" // Serial Console Messages
#define MSG_POWERUP "Zasilanie wlaczone"
#define MSG_EXTERNAL_RESET " Reset (zewnetrzny)" #define MSG_Enqueing "Kolejkowanie \""
#define MSG_BROWNOUT_RESET " Reset (spadek napiecia)" #define MSG_POWERUP "Zasilanie wlaczone"
#define MSG_WATCHDOG_RESET " Reset (watchdog)" #define MSG_EXTERNAL_RESET " Reset (zewnetrzny)"
#define MSG_SOFTWARE_RESET " Reset (programowy)" #define MSG_BROWNOUT_RESET " Reset (spadek napiecia)"
#define MSG_MARLIN "Marlin " #define MSG_WATCHDOG_RESET " Reset (watchdog)"
#define MSG_AUTHOR " | Autor: " #define MSG_SOFTWARE_RESET " Reset (programowy)"
#define MSG_CONFIGURATION_VER " Ostatnia aktualizacja: " #define MSG_MARLIN "Marlin "
#define MSG_FREE_MEMORY " Wolna pamiec: " #define MSG_AUTHOR " | Autor: "
#define MSG_PLANNER_BUFFER_BYTES " Bufor planisty krokow (w bajtach): " #define MSG_CONFIGURATION_VER " Ostatnia aktualizacja: "
#define MSG_OK "ok" #define MSG_FREE_MEMORY " Wolna pamiec: "
#define MSG_FILE_SAVED "Plik zapisany." #define MSG_PLANNER_BUFFER_BYTES " Bufor planisty krokow (w bajtach): "
#define MSG_ERR_LINE_NO "Numer linijki nie jest ostatnim numerem linijki+1; ostatnia linijka:" #define MSG_OK "ok"
#define MSG_ERR_CHECKSUM_MISMATCH "Niezgodna suma kontrolna; ostatnia linijka: " #define MSG_FILE_SAVED "Plik zapisany."
#define MSG_ERR_NO_CHECKSUM "Brak sumy kontrolnej w linijce; ostatnia linijka:" #define MSG_ERR_LINE_NO "Numer linijki nie jest ostatnim numerem linijki+1; ostatnia linijka:"
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Brak numery linijki przy sumie kontrolnej; ostatnia linijka:" #define MSG_ERR_CHECKSUM_MISMATCH "Niezgodna suma kontrolna; ostatnia linijka: "
#define MSG_FILE_PRINTED "Ukonczono wydruk z pliku" #define MSG_ERR_NO_CHECKSUM "Brak sumy kontrolnej w linijce; ostatnia linijka:"
#define MSG_BEGIN_FILE_LIST "Start listy plikow" #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Brak numery linijki przy sumie kontrolnej; ostatnia linijka:"
#define MSG_END_FILE_LIST "Koniec listy plikow" #define MSG_FILE_PRINTED "Ukonczono wydruk z pliku"
#define MSG_M104_INVALID_EXTRUDER "M104 Niepoprawny ekstruder " #define MSG_BEGIN_FILE_LIST "Start listy plikow"
#define MSG_M105_INVALID_EXTRUDER "M105 Niepoprawny ekstruder " #define MSG_END_FILE_LIST "Koniec listy plikow"
#define MSG_ERR_NO_THERMISTORS "Brak termistorow - brak temperatury :(" #define MSG_M104_INVALID_EXTRUDER "M104 Niepoprawny ekstruder "
#define MSG_M109_INVALID_EXTRUDER "M109 Niepoprawny ekstruder " #define MSG_M105_INVALID_EXTRUDER "M105 Niepoprawny ekstruder "
#define MSG_HEATING "Nagrzewanie ekstrudera..." #define MSG_M218_INVALID_EXTRUDER "M218 Niepoprawny ekstruder "
#define MSG_HEATING_COMPLETE "Nagrzewanie ekstrudera zakonczone." #define MSG_ERR_NO_THERMISTORS "Brak termistorow - brak temperatury :("
#define MSG_BED_HEATING "Nagrzewanie loza..." #define MSG_M109_INVALID_EXTRUDER "M109 Niepoprawny ekstruder "
#define MSG_BED_DONE "Nagrzewanie loza zakonczone." #define MSG_HEATING "Nagrzewanie ekstrudera..."
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" #define MSG_HEATING_COMPLETE "Nagrzewanie ekstrudera zakonczone."
#define MSG_COUNT_X " Liczenie X: " #define MSG_BED_HEATING "Nagrzewanie loza..."
#define MSG_ERR_KILLED "Drukarka zatrzymana. Wywolano kill()" #define MSG_BED_DONE "Nagrzewanie loza zakonczone."
#define MSG_ERR_STOPPED "Drukarka zatrzymana z powodu bledu. Usun problem i zrestartuj drukartke komenda M999. (temperatura zostala zresetowana; ustaw temperature po restarcie)" #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
#define MSG_RESEND "Wyslij ponownie: " #define MSG_COUNT_X " Liczenie X: "
#define MSG_UNKNOWN_COMMAND "Nieznane polecenie: \"" #define MSG_ERR_KILLED "Drukarka zatrzymana. Wywolano kill()"
#define MSG_ACTIVE_EXTRUDER "Aktywny ekstruder: " #define MSG_ERR_STOPPED "Drukarka zatrzymana z powodu bledu. Usun problem i zrestartuj drukartke komenda M999. (temperatura zostala zresetowana; ustaw temperature po restarcie)"
#define MSG_INVALID_EXTRUDER "Niepoprawny ekstruder" #define MSG_RESEND "Wyslij ponownie: "
#define MSG_X_MIN "x_min: " #define MSG_UNKNOWN_COMMAND "Nieznane polecenie: \""
#define MSG_X_MAX "x_max: " #define MSG_ACTIVE_EXTRUDER "Aktywny ekstruder: "
#define MSG_Y_MIN "y_min: " #define MSG_INVALID_EXTRUDER "Niepoprawny ekstruder"
#define MSG_Y_MAX "y_max: " #define MSG_X_MIN "x_min: "
#define MSG_Z_MIN "z_min: " #define MSG_X_MAX "x_max: "
#define MSG_Z_MAX "z_max: " #define MSG_Y_MIN "y_min: "
#define MSG_M119_REPORT "Zgloszenie statusu wylacznikow krancowych" #define MSG_Y_MAX "y_max: "
#define MSG_ENDSTOP_HIT "WYZWOLONY" #define MSG_Z_MIN "z_min: "
#define MSG_ENDSTOP_OPEN "otwarty" #define MSG_Z_MAX "z_max: "
#define MSG_M119_REPORT "Zgloszenie statusu wylacznikow krancowych"
#define MSG_SD_CANT_OPEN_SUBDIR "Nie mozna otworzyc podkatalogu" #define MSG_ENDSTOP_HIT "WYZWOLONY"
#define MSG_SD_INIT_FAIL "Blad inicjalizacji karty SD" #define MSG_ENDSTOP_OPEN "otwarty"
#define MSG_SD_VOL_INIT_FAIL "Blad inizjalizacji wolumenu" #define MSG_HOTEND_OFFSET "Hotend offsets:"
#define MSG_SD_OPENROOT_FAIL "Blad odczytywania katalogu glownego"
#define MSG_SD_CARD_OK "Karta SD zainicjalizowana" #define MSG_SD_CANT_OPEN_SUBDIR "Nie mozna otworzyc podkatalogu"
#define MSG_SD_WORKDIR_FAIL "Blad odczytywania katalogu roboczego" #define MSG_SD_INIT_FAIL "Blad inicjalizacji karty SD"
#define MSG_SD_OPEN_FILE_FAIL "Nie mozna otworzyc pliku: " #define MSG_SD_VOL_INIT_FAIL "Blad inizjalizacji wolumenu"
#define MSG_SD_FILE_OPENED "Otwarto plik:" #define MSG_SD_OPENROOT_FAIL "Blad odczytywania katalogu glownego"
#define MSG_SD_SIZE " Rozmiar:" #define MSG_SD_CARD_OK "Karta SD zainicjalizowana"
#define MSG_SD_FILE_SELECTED "Wybrano plik" #define MSG_SD_WORKDIR_FAIL "Blad odczytywania katalogu roboczego"
#define MSG_SD_WRITE_TO_FILE "Zapisywanie do pliku: " #define MSG_SD_OPEN_FILE_FAIL "Nie mozna otworzyc pliku: "
#define MSG_SD_PRINTING_BYTE "Drukowanie z karty SD, bajt " #define MSG_SD_FILE_OPENED "Otwarto plik:"
#define MSG_SD_NOT_PRINTING "Nie trwa drukowanie z karty SD" #define MSG_SD_SIZE " Rozmiar:"
#define MSG_SD_ERR_WRITE_TO_FILE "blad podczas zapisu do pliku" #define MSG_SD_FILE_SELECTED "Wybrano plik"
#define MSG_SD_CANT_ENTER_SUBDIR "Nie mozna odczytac podkatalogu: " #define MSG_SD_WRITE_TO_FILE "Zapisywanie do pliku: "
#define MSG_SD_PRINTING_BYTE "Drukowanie z karty SD, bajt "
#define MSG_STEPPER_TO_HIGH "Za duza czestotliwosc krokow: " #define MSG_SD_NOT_PRINTING "Nie trwa drukowanie z karty SD"
#define MSG_ENDSTOPS_HIT "Wylacznik krancowy zostal wyzwolony na pozycji: " #define MSG_SD_ERR_WRITE_TO_FILE "blad podczas zapisu do pliku"
#define MSG_ERR_COLD_EXTRUDE_STOP " uniemozliwiono zimna ekstruzje" #define MSG_SD_CANT_ENTER_SUBDIR "Nie mozna odczytac podkatalogu: "
#define MSG_ERR_LONG_EXTRUDE_STOP " uniemozliwiono zbyt dluga ekstruzje"
#define MSG_STEPPER_TO_HIGH "Za duza czestotliwosc krokow: "
#endif #define MSG_ENDSTOPS_HIT "Wylacznik krancowy zostal wyzwolony na pozycji: "
#define MSG_ERR_COLD_EXTRUDE_STOP " uniemozliwiono zimna ekstruzje"
#define MSG_ERR_LONG_EXTRUDE_STOP " uniemozliwiono zbyt dluga ekstruzje"
#if LANGUAGE_CHOICE == 3
#endif
#define WELCOME_MSG MACHINE_NAME " Pret."
#define MSG_SD_INSERTED "Carte inseree"
#define MSG_SD_REMOVED "Carte retiree" #if LANGUAGE_CHOICE == 3
#define MSG_MAIN " Principal \003"
#define MSG_AUTOSTART " Demarrage auto." #define WELCOME_MSG MACHINE_NAME " Pret."
#define MSG_DISABLE_STEPPERS " Desactiver moteurs" #define MSG_SD_INSERTED "Carte inseree"
#define MSG_AUTO_HOME " Home auto." #define MSG_SD_REMOVED "Carte retiree"
#define MSG_SET_ORIGIN " Regler origine" #define MSG_MAIN " Principal \003"
#define MSG_PREHEAT_PLA " Prechauffage PLA" #define MSG_AUTOSTART " Demarrage auto."
#define MSG_PREHEAT_PLA_SETTINGS " Regl. prechauffe PLA" #define MSG_DISABLE_STEPPERS " Desactiver moteurs"
#define MSG_PREHEAT_ABS " Prechauffage ABS" #define MSG_AUTO_HOME " Home auto."
#define MSG_PREHEAT_ABS_SETTINGS " Regl. prechauffe ABS" #define MSG_SET_ORIGIN " Regler origine"
#define MSG_COOLDOWN " Refroidissement" #define MSG_PREHEAT_PLA " Prechauffage PLA"
#define MSG_EXTRUDE " Extrusion" #define MSG_PREHEAT_PLA_SETTINGS " Regl. prechauffe PLA"
#define MSG_RETRACT " Retractation" #define MSG_PREHEAT_ABS " Prechauffage ABS"
#define MSG_PREHEAT_PLA " Prechauffage PLA" #define MSG_PREHEAT_ABS_SETTINGS " Regl. prechauffe ABS"
#define MSG_PREHEAT_ABS " Prechauffage ABS" #define MSG_COOLDOWN " Refroidissement"
#define MSG_MOVE_AXIS " Deplacer axe \x7E" #define MSG_EXTRUDE " Extrusion"
#define MSG_SPEED " Vitesse:" #define MSG_RETRACT " Retractation"
#define MSG_NOZZLE " \002Buse:" #define MSG_PREHEAT_PLA " Prechauffage PLA"
#define MSG_NOZZLE1 " \002Buse2:" #define MSG_PREHEAT_ABS " Prechauffage ABS"
#define MSG_NOZZLE2 " \002Buse3:" #define MSG_MOVE_AXIS " Deplacer axe \x7E"
#define MSG_BED " \002Lit:" #define MSG_SPEED " Vitesse:"
#define MSG_FAN_SPEED " Vitesse ventilateur:" #define MSG_NOZZLE " \002Buse:"
#define MSG_FLOW " Flux:" #define MSG_NOZZLE1 " \002Buse2:"
#define MSG_CONTROL " Controle \003" #define MSG_NOZZLE2 " \002Buse3:"
#define MSG_MIN " \002 Min:" #define MSG_BED " \002Lit:"
#define MSG_MAX " \002 Max:" #define MSG_FAN_SPEED " Vitesse ventilateur:"
#define MSG_FACTOR " \002 Facteur:" #define MSG_FLOW " Flux:"
#define MSG_AUTOTEMP " Temp. Auto.:" #define MSG_CONTROL " Controle \003"
#define MSG_ON "Marche " #define MSG_MIN " \002 Min:"
#define MSG_OFF "Arret" #define MSG_MAX " \002 Max:"
#define MSG_PID_P " PID-P: " #define MSG_FACTOR " \002 Facteur:"
#define MSG_PID_I " PID-I: " #define MSG_AUTOTEMP " Temp. Auto.:"
#define MSG_PID_D " PID-D: " #define MSG_ON "Marche "
#define MSG_PID_C " PID-C: " #define MSG_OFF "Arret"
#define MSG_ACC " Acc:" #define MSG_PID_P " PID-P: "
#define MSG_VXY_JERK " Vxy-jerk: " #define MSG_PID_I " PID-I: "
#define MSG_VMAX " Vmax " #define MSG_PID_D " PID-D: "
#define MSG_X "x:" #define MSG_PID_C " PID-C: "
#define MSG_Y "y:" #define MSG_ACC " Acc:"
#define MSG_Z "z:" #define MSG_VXY_JERK " Vxy-jerk: "
#define MSG_E "e:" #define MSG_VMAX " Vmax "
#define MSG_VMIN " Vmin:" #define MSG_X "x:"
#define MSG_VTRAV_MIN " Vdepl min:" #define MSG_Y "y:"
#define MSG_AMAX " Amax " #define MSG_Z "z:"
#define MSG_A_RETRACT " A-retract:" #define MSG_E "e:"
#define MSG_XSTEPS " Xpas/mm:" #define MSG_VMIN " Vmin:"
#define MSG_YSTEPS " Ypas/mm:" #define MSG_VTRAV_MIN " Vdepl min:"
#define MSG_ZSTEPS " Zpas/mm:" #define MSG_AMAX " Amax "
#define MSG_ESTEPS " Epas/mm:" #define MSG_A_RETRACT " A-retract:"
#define MSG_MAIN_WIDE " Principal \003" #define MSG_XSTEPS " Xpas/mm:"
#define MSG_RECTRACT_WIDE " Rectractater \x7E" #define MSG_YSTEPS " Ypas/mm:"
#define MSG_TEMPERATURE_WIDE " Temperature \x7E" #define MSG_ZSTEPS " Zpas/mm:"
#define MSG_TEMPERATURE_RTN " Temperature \003" #define MSG_ESTEPS " Epas/mm:"
#define MSG_MOTION_WIDE " Mouvement \x7E" #define MSG_MAIN_WIDE " Principal \003"
#define MSG_STORE_EPROM " Sauvegarder memoire" #define MSG_RECTRACT_WIDE " Rectractater \x7E"
#define MSG_LOAD_EPROM " Lire memoire" #define MSG_TEMPERATURE_WIDE " Temperature \x7E"
#define MSG_RESTORE_FAILSAFE " Restaurer memoire" #define MSG_TEMPERATURE_RTN " Temperature \003"
#define MSG_REFRESH "\004Actualiser" #define MSG_MOTION_WIDE " Mouvement \x7E"
#define MSG_WATCH " Surveiller \003" #define MSG_STORE_EPROM " Sauvegarder memoire"
#define MSG_PREPARE " Preparer \x7E" #define MSG_LOAD_EPROM " Lire memoire"
#define MSG_PREPARE_ALT " Prepare \003" #define MSG_RESTORE_FAILSAFE " Restaurer memoire"
#define MSG_CONTROL_ARROW " Controle \x7E" #define MSG_REFRESH "\004Actualiser"
#define MSG_RETRACT_ARROW " Retracter \x7E" #define MSG_WATCH " Surveiller \003"
#define MSG_TUNE " Regler \x7E" #define MSG_PREPARE " Preparer \x7E"
#define MSG_PAUSE_PRINT " Pause impression \x7E" #define MSG_PREPARE_ALT " Prepare \003"
#define MSG_RESUME_PRINT " Reprendre impression \x7E" #define MSG_CONTROL_ARROW " Controle \x7E"
#define MSG_STOP_PRINT " Arreter impression \x7E" #define MSG_RETRACT_ARROW " Retracter \x7E"
#define MSG_CARD_MENU " Menu carte \x7E" #define MSG_TUNE " Regler \x7E"
#define MSG_NO_CARD " Pas de carte" #define MSG_PAUSE_PRINT " Pause impression \x7E"
#define MSG_DWELL "Repos..." #define MSG_RESUME_PRINT " Reprendre impression \x7E"
#define MSG_USERWAIT "Attente de l'utilisateur..." #define MSG_STOP_PRINT " Arreter impression \x7E"
#define MSG_NO_MOVE "Aucun mouvement." #define MSG_CARD_MENU " Menu carte \x7E"
#define MSG_PART_RELEASE "Relache partielle" #define MSG_NO_CARD " Pas de carte"
#define MSG_KILLED "TUE." #define MSG_DWELL "Repos..."
#define MSG_STOPPED "STOPPE." #define MSG_USERWAIT "Attente de l'utilisateur..."
#define MSG_STEPPER_RELEASED "RELACHE." #define MSG_NO_MOVE "Aucun mouvement."
#define MSG_CONTROL_RETRACT " Retractation mm:" #define MSG_PART_RELEASE "Relache partielle"
#define MSG_CONTROL_RETRACTF " Retractation F:" #define MSG_KILLED "TUE."
#define MSG_CONTROL_RETRACT_ZLIFT " Hop mm:" #define MSG_STOPPED "STOPPE."
#define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:" #define MSG_STEPPER_RELEASED "RELACHE."
#define MSG_CONTROL_RETRACT_RECOVERF " UnRet F:" #define MSG_CONTROL_RETRACT " Retractation mm:"
#define MSG_AUTORETRACT " Retract. Auto.:" #define MSG_CONTROL_RETRACTF " Retractation F:"
#define MSG_FILAMENTCHANGE "Change filament" #define MSG_CONTROL_RETRACT_ZLIFT " Hop mm:"
#define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:"
// Serial Console Messages #define MSG_CONTROL_RETRACT_RECOVERF " UnRet F:"
#define MSG_AUTORETRACT " Retract. Auto.:"
#define MSG_Enqueing "Mise en tampon \"" #define MSG_FILAMENTCHANGE "Change filament"
#define MSG_POWERUP "Allumage"
#define MSG_EXTERNAL_RESET " RAZ Externe" // Serial Console Messages
#define MSG_BROWNOUT_RESET " RAZ defaut alim."
#define MSG_WATCHDOG_RESET " RAZ Watchdog" #define MSG_Enqueing "Mise en tampon \""
#define MSG_SOFTWARE_RESET " RAZ logicielle" #define MSG_POWERUP "Allumage"
#define MSG_MARLIN "Marlin " #define MSG_EXTERNAL_RESET " RAZ Externe"
#define MSG_AUTHOR " | Auteur: " #define MSG_BROWNOUT_RESET " RAZ defaut alim."
#define MSG_CONFIGURATION_VER " Derniere MaJ: " #define MSG_WATCHDOG_RESET " RAZ Watchdog"
#define MSG_FREE_MEMORY " Memoire libre: " #define MSG_SOFTWARE_RESET " RAZ logicielle"
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " #define MSG_MARLIN "Marlin "
#define MSG_OK "ok" #define MSG_AUTHOR " | Auteur: "
#define MSG_FILE_SAVED "Fichier enregistre." #define MSG_CONFIGURATION_VER " Derniere MaJ: "
#define MSG_ERR_LINE_NO "Le numero de ligne n'est pas la derniere ligne + 1, derniere ligne: " #define MSG_FREE_MEMORY " Memoire libre: "
#define MSG_ERR_CHECKSUM_MISMATCH "Erreur somme de controle, derniere ligne: " #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
#define MSG_ERR_NO_CHECKSUM "Pas de somme de controle avec le numero de ligne, derniere ligne: " #define MSG_OK "ok"
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Pas de numero de ligne avec somme de controle, derniere ligne: " #define MSG_FILE_SAVED "Fichier enregistre."
#define MSG_FILE_PRINTED "Impression terminee" #define MSG_ERR_LINE_NO "Le numero de ligne n'est pas la derniere ligne + 1, derniere ligne: "
#define MSG_BEGIN_FILE_LIST "Debut de la liste de fichiers" #define MSG_ERR_CHECKSUM_MISMATCH "Erreur somme de controle, derniere ligne: "
#define MSG_END_FILE_LIST "Fin de la liste de fichiers" #define MSG_ERR_NO_CHECKSUM "Pas de somme de controle avec le numero de ligne, derniere ligne: "
#define MSG_M104_INVALID_EXTRUDER "M104 Extruder invalide" #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Pas de numero de ligne avec somme de controle, derniere ligne: "
#define MSG_M105_INVALID_EXTRUDER "M105 Extruder invalide" #define MSG_FILE_PRINTED "Impression terminee"
#define MSG_ERR_NO_THERMISTORS "Pas de thermistor, pas de temperature" #define MSG_BEGIN_FILE_LIST "Debut de la liste de fichiers"
#define MSG_M109_INVALID_EXTRUDER "M109 Extruder invalide " #define MSG_END_FILE_LIST "Fin de la liste de fichiers"
#define MSG_HEATING "En chauffe..." #define MSG_M104_INVALID_EXTRUDER "M104 Extruder invalide"
#define MSG_HEATING_COMPLETE "Chauffe terminee." #define MSG_M105_INVALID_EXTRUDER "M105 Extruder invalide"
#define MSG_BED_HEATING "Chauffe du lit." #define MSG_M218_INVALID_EXTRUDER "M218 Extruder invalide"
#define MSG_BED_DONE "Chauffe du lit terminee." #define MSG_ERR_NO_THERMISTORS "Pas de thermistor, pas de temperature"
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" #define MSG_M109_INVALID_EXTRUDER "M109 Extruder invalide "
#define MSG_COUNT_X " Compteur X: " #define MSG_HEATING "En chauffe..."
#define MSG_ERR_KILLED "Impression arretee. kill() appelee!" #define MSG_HEATING_COMPLETE "Chauffe terminee."
#define MSG_ERR_STOPPED "Impression arretee a cause d'erreurs. Corriger les erreurs et utiliser M999 pour la reprendre. (Temperature remise a zero. Reactivez la apres redemarrage)" #define MSG_BED_HEATING "Chauffe du lit."
#define MSG_RESEND "Renvoie: " #define MSG_BED_DONE "Chauffe du lit terminee."
#define MSG_UNKNOWN_COMMAND "Commande inconnue: \"" #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
#define MSG_ACTIVE_EXTRUDER "Extrudeur actif: " #define MSG_COUNT_X " Compteur X: "
#define MSG_INVALID_EXTRUDER "Extrudeur invalide" #define MSG_ERR_KILLED "Impression arretee. kill() appelee!"
#define MSG_X_MIN "x_min: " #define MSG_ERR_STOPPED "Impression arretee a cause d'erreurs. Corriger les erreurs et utiliser M999 pour la reprendre. (Temperature remise a zero. Reactivez la apres redemarrage)"
#define MSG_X_MAX "x_max: " #define MSG_RESEND "Renvoie: "
#define MSG_Y_MIN "y_min: " #define MSG_UNKNOWN_COMMAND "Commande inconnue: \""
#define MSG_Y_MAX "y_max: " #define MSG_ACTIVE_EXTRUDER "Extrudeur actif: "
#define MSG_Z_MIN "z_min: " #define MSG_INVALID_EXTRUDER "Extrudeur invalide"
#define MSG_Z_MAX "z_max: " #define MSG_X_MIN "x_min: "
#define MSG_M119_REPORT "Affichage du status des fin de course" #define MSG_X_MAX "x_max: "
#define MSG_ENDSTOP_HIT "DECLENCHE" #define MSG_Y_MIN "y_min: "
#define MSG_ENDSTOP_OPEN "OUVERT" #define MSG_Y_MAX "y_max: "
#define MSG_Z_MIN "z_min: "
#define MSG_SD_CANT_OPEN_SUBDIR "Impossible d'ouvrir le sous-repertoire" #define MSG_Z_MAX "z_max: "
#define MSG_SD_INIT_FAIL "Echec de l'initialisation de la SD" #define MSG_M119_REPORT "Affichage du status des fin de course"
#define MSG_SD_VOL_INIT_FAIL "Echec de volume.init" #define MSG_ENDSTOP_HIT "DECLENCHE"
#define MSG_SD_OPENROOT_FAIL "Echec openRoot" #define MSG_ENDSTOP_OPEN "OUVERT"
#define MSG_SD_CARD_OK "Carte SD Ok" #define MSG_HOTEND_OFFSET "Hotend offsets:"
#define MSG_SD_WORKDIR_FAIL "Echec d'ouverture workDir"
#define MSG_SD_OPEN_FILE_FAIL "Echec d'ouverture, Fichier: " #define MSG_SD_CANT_OPEN_SUBDIR "Impossible d'ouvrir le sous-repertoire"
#define MSG_SD_FILE_OPENED "Fichier ouvert: " #define MSG_SD_INIT_FAIL "Echec de l'initialisation de la SD"
#define MSG_SD_SIZE " Taille: " #define MSG_SD_VOL_INIT_FAIL "Echec de volume.init"
#define MSG_SD_FILE_SELECTED "Fichier selectionne" #define MSG_SD_OPENROOT_FAIL "Echec openRoot"
#define MSG_SD_WRITE_TO_FILE "Ecriture dans le fichier: " #define MSG_SD_CARD_OK "Carte SD Ok"
#define MSG_SD_PRINTING_BYTE "Octet impression SD " #define MSG_SD_WORKDIR_FAIL "Echec d'ouverture workDir"
#define MSG_SD_NOT_PRINTING "Pas d'impression SD" #define MSG_SD_OPEN_FILE_FAIL "Echec d'ouverture, Fichier: "
#define MSG_SD_ERR_WRITE_TO_FILE "Erreur d'ecriture dans le fichier" #define MSG_SD_FILE_OPENED "Fichier ouvert: "
#define MSG_SD_CANT_ENTER_SUBDIR "Impossible d'entrer dans le sous-repertoire: " #define MSG_SD_SIZE " Taille: "
#define MSG_SD_FILE_SELECTED "Fichier selectionne"
#define MSG_STEPPER_TO_HIGH "Steprate trop eleve: " #define MSG_SD_WRITE_TO_FILE "Ecriture dans le fichier: "
#define MSG_ENDSTOPS_HIT "Fin de course atteint: " #define MSG_SD_PRINTING_BYTE "Octet impression SD "
#define MSG_ERR_COLD_EXTRUDE_STOP " Extrusion a froid evitee" #define MSG_SD_NOT_PRINTING "Pas d'impression SD"
#define MSG_ERR_LONG_EXTRUDE_STOP " Extrusion longue evitee" #define MSG_SD_ERR_WRITE_TO_FILE "Erreur d'ecriture dans le fichier"
#define MSG_SD_CANT_ENTER_SUBDIR "Impossible d'entrer dans le sous-repertoire: "
#endif
#define MSG_STEPPER_TO_HIGH "Steprate trop eleve: "
#define MSG_ENDSTOPS_HIT "Fin de course atteint: "
#if LANGUAGE_CHOICE == 4 #define MSG_ERR_COLD_EXTRUDE_STOP " Extrusion a froid evitee"
#define MSG_ERR_LONG_EXTRUDE_STOP " Extrusion longue evitee"
// LCD Menu Messages
#endif
#define WELCOME_MSG MACHINE_NAME " Bereit."
#define MSG_SD_INSERTED "SDKarte erkannt" #if LANGUAGE_CHOICE == 4
#define MSG_SD_REMOVED "SDKarte entfernt"
#define MSG_MAIN "Hauptmneü" // LCD Menu Messages
#define MSG_AUTOSTART "Autostart"
#define MSG_DISABLE_STEPPERS "Stepper abschalten" #define WELCOME_MSG MACHINE_NAME " Bereit."
#define MSG_AUTO_HOME "Auto Nullpunkt"
#define MSG_SET_ORIGIN "Setze Nullpunkt" #define MSG_SD_INSERTED "SDKarte erkannt"
#define MSG_PREHEAT_PLA "Vorwärmen PLA" #define MSG_SD_REMOVED "SDKarte entfernt"
#define MSG_PREHEAT_PLA_SETTINGS "Vorwärmen PLA Einstellungen" #define MSG_MAIN "Hauptmneü"
#define MSG_PREHEAT_ABS "Vorwärmen ABS" #define MSG_AUTOSTART "Autostart"
#define MSG_PREHEAT_ABS_SETTINGS "Vorwärmen ABS Einstellungen" #define MSG_DISABLE_STEPPERS "Stepper abschalten"
#define MSG_COOLDOWN "Abkühlen" #define MSG_AUTO_HOME "Auto Nullpunkt"
#define MSG_EXTRUDE "Extrude" #define MSG_SET_ORIGIN "Setze Nullpunkt"
#define MSG_RETRACT "Retract" #define MSG_PREHEAT_PLA "Vorwärmen PLA"
#define MSG_MOVE_AXIS "Achsen bewegen" #define MSG_PREHEAT_PLA_SETTINGS "Vorwärmen PLA Einstellungen"
#define MSG_SPEED "Geschw" #define MSG_PREHEAT_ABS "Vorwärmen ABS"
#define MSG_NOZZLE "Düse" #define MSG_PREHEAT_ABS_SETTINGS "Vorwärmen ABS Einstellungen"
#define MSG_NOZZLE1 "Düse2" #define MSG_COOLDOWN "Abkühlen"
#define MSG_NOZZLE2 "Düse3" #define MSG_EXTRUDE "Extrude"
#define MSG_BED "Bett" #define MSG_RETRACT "Retract"
#define MSG_FAN_SPEED "Lüftergeschw." #define MSG_MOVE_AXIS "Achsen bewegen"
#define MSG_FLOW "Fluß" #define MSG_SPEED "Geschw"
#define MSG_CONTROL "Einstellungen" #define MSG_NOZZLE "Düse"
#define MSG_MIN "\002 Min" #define MSG_NOZZLE1 "Düse2"
#define MSG_MAX "\002 Max" #define MSG_NOZZLE2 "Düse3"
#define MSG_FACTOR "\002 Faktor" #define MSG_BED "Bett"
#define MSG_AUTOTEMP "AutoTemp" #define MSG_FAN_SPEED "Lüftergeschw."
#define MSG_ON "Ein" #define MSG_FLOW "Fluß"
#define MSG_OFF "Aus" #define MSG_CONTROL "Einstellungen"
#define MSG_PID_P "PID-P" #define MSG_MIN "\002 Min"
#define MSG_PID_I "PID-I" #define MSG_MAX "\002 Max"
#define MSG_PID_D "PID-D" #define MSG_FACTOR "\002 Faktor"
#define MSG_PID_C "PID-C" #define MSG_AUTOTEMP "AutoTemp"
#define MSG_ACC "Acc" #define MSG_ON "Ein"
#define MSG_VXY_JERK "Vxy-jerk" #define MSG_OFF "Aus"
#define MSG_VMAX "Vmax " #define MSG_PID_P "PID-P"
#define MSG_X "x" #define MSG_PID_I "PID-I"
#define MSG_Y "y" #define MSG_PID_D "PID-D"
#define MSG_Z "z" #define MSG_PID_C "PID-C"
#define MSG_E "e" #define MSG_ACC "Acc"
#define MSG_VMIN "Vmin" #define MSG_VXY_JERK "Vxy-jerk"
#define MSG_VTRAV_MIN "VTrav min" #define MSG_VMAX "Vmax "
#define MSG_AMAX "Amax " #define MSG_X "x"
#define MSG_A_RETRACT "A-Retract" #define MSG_Y "y"
#define MSG_XSTEPS "Xsteps/mm" #define MSG_Z "z"
#define MSG_YSTEPS "Ysteps/mm" #define MSG_E "e"
#define MSG_ZSTEPS "Zsteps/mm" #define MSG_VMIN "Vmin"
#define MSG_ESTEPS "Esteps/mm" #define MSG_VTRAV_MIN "VTrav min"
#define MSG_RECTRACT_WIDE "Rectract" #define MSG_AMAX "Amax "
#define MSG_WATCH "Beobachten" #define MSG_A_RETRACT "A-Retract"
#define MSG_TEMPERATURE "Temperatur" #define MSG_XSTEPS "Xsteps/mm"
#define MSG_MOTION "Bewegung" #define MSG_YSTEPS "Ysteps/mm"
#define MSG_STORE_EPROM "EPROM speichern" #define MSG_ZSTEPS "Zsteps/mm"
#define MSG_LOAD_EPROM "EPROM laden" #define MSG_ESTEPS "Esteps/mm"
#define MSG_RESTORE_FAILSAFE "Standardkonfig." #define MSG_RECTRACT_WIDE "Rectract"
#define MSG_REFRESH "Aktualisieren" #define MSG_WATCH "Beobachten"
#define MSG_PREPARE "Vorbereitung" #define MSG_TEMPERATURE "Temperatur"
#define MSG_CONTROL "Einstellungen" #define MSG_MOTION "Bewegung"
#define MSG_TUNE "Justierung" #define MSG_STORE_EPROM "EPROM speichern"
#define MSG_PAUSE_PRINT "Druck anhalten" #define MSG_LOAD_EPROM "EPROM laden"
#define MSG_RESUME_PRINT "Druck fortsetz" #define MSG_RESTORE_FAILSAFE "Standardkonfig."
#define MSG_STOP_PRINT "Druck stoppen" #define MSG_REFRESH "Aktualisieren"
#define MSG_CARD_MENU "SDKarten Menü" #define MSG_PREPARE "Vorbereitung"
#define MSG_NO_CARD "Keine SDKarte" #define MSG_CONTROL "Einstellungen"
#define MSG_DWELL "Warten..." #define MSG_TUNE "Justierung"
#define MSG_USERWAIT "Warte auf Nutzer..." #define MSG_PAUSE_PRINT "Druck anhalten"
#define MSG_RESUMING "Druck fortsetzung" #define MSG_RESUME_PRINT "Druck fortsetz"
#define MSG_NO_MOVE "Kein Zug." #define MSG_STOP_PRINT "Druck stoppen"
#define MSG_PART_RELEASE "Stepper tlw frei" #define MSG_CARD_MENU "SDKarten Menü"
#define MSG_KILLED "KILLED" #define MSG_NO_CARD "Keine SDKarte"
#define MSG_STOPPED "GESTOPPT" #define MSG_DWELL "Warten..."
#define MSG_STEPPER_RELEASED "Stepper frei" #define MSG_USERWAIT "Warte auf Nutzer..."
#define MSG_CONTROL_RETRACT "Retract mm" #define MSG_RESUMING "Druck fortsetzung"
#define MSG_CONTROL_RETRACTF "Retract F" #define MSG_NO_MOVE "Kein Zug."
#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm" #define MSG_PART_RELEASE "Stepper tlw frei"
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm" #define MSG_KILLED "KILLED"
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet F" #define MSG_STOPPED "GESTOPPT"
#define MSG_AUTORETRACT "AutoRetr." #define MSG_STEPPER_RELEASED "Stepper frei"
#define MSG_FILAMENTCHANGE "Filament wechseln" #define MSG_CONTROL_RETRACT "Retract mm"
#define MSG_CONTROL_RETRACTF "Retract F"
// Serial Console Messages #define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
#define MSG_Enqueing "enqueing \"" #define MSG_CONTROL_RETRACT_RECOVERF "UnRet F"
#define MSG_POWERUP "PowerUp" #define MSG_AUTORETRACT "AutoRetr."
#define MSG_EXTERNAL_RESET " External Reset" #define MSG_FILAMENTCHANGE "Filament wechseln"
#define MSG_BROWNOUT_RESET " Brown out Reset"
#define MSG_WATCHDOG_RESET " Watchdog Reset" // Serial Console Messages
#define MSG_SOFTWARE_RESET " Software Reset"
#define MSG_MARLIN "Marlin: " #define MSG_Enqueing "enqueing \""
#define MSG_AUTHOR " | Author: " #define MSG_POWERUP "PowerUp"
#define MSG_CONFIGURATION_VER " Last Updated: " #define MSG_EXTERNAL_RESET " External Reset"
#define MSG_FREE_MEMORY " Free Memory: " #define MSG_BROWNOUT_RESET " Brown out Reset"
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " #define MSG_WATCHDOG_RESET " Watchdog Reset"
#define MSG_OK "ok" #define MSG_SOFTWARE_RESET " Software Reset"
#define MSG_FILE_SAVED "Done saving file." #define MSG_MARLIN "Marlin: "
#define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line:" #define MSG_AUTHOR " | Author: "
#define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line:" #define MSG_CONFIGURATION_VER " Last Updated: "
#define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line:" #define MSG_FREE_MEMORY " Free Memory: "
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line:" #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
#define MSG_FILE_PRINTED "Done printing file" #define MSG_OK "ok"
#define MSG_BEGIN_FILE_LIST "Begin file list" #define MSG_FILE_SAVED "Done saving file."
#define MSG_END_FILE_LIST "End file list" #define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line:"
#define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder " #define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line:"
#define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder " #define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line:"
#define MSG_ERR_NO_THERMISTORS "No thermistors - no temp" #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line:"
#define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder " #define MSG_FILE_PRINTED "Done printing file"
#define MSG_HEATING "Heating..." #define MSG_BEGIN_FILE_LIST "Begin file list"
#define MSG_HEATING_COMPLETE "Heating done." #define MSG_END_FILE_LIST "End file list"
#define MSG_BED_HEATING "Bed Heating." #define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
#define MSG_BED_DONE "Bed done." #define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" #define MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder "
#define MSG_COUNT_X " Count X:" #define MSG_ERR_NO_THERMISTORS "No thermistors - no temp"
#define MSG_ERR_KILLED "Printer halted. kill() called !!" #define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
#define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart!" #define MSG_HEATING "Heating..."
#define MSG_RESEND "Resend:" #define MSG_HEATING_COMPLETE "Heating done."
#define MSG_UNKNOWN_COMMAND "Unknown command:\"" #define MSG_BED_HEATING "Bed Heating."
#define MSG_ACTIVE_EXTRUDER "Active Extruder: " #define MSG_BED_DONE "Bed done."
#define MSG_INVALID_EXTRUDER "Invalid extruder" #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
#define MSG_X_MIN "x_min: " #define MSG_COUNT_X " Count X:"
#define MSG_X_MAX "x_max: " #define MSG_ERR_KILLED "Printer halted. kill() called !!"
#define MSG_Y_MIN "y_min: " #define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart!"
#define MSG_Y_MAX "y_max: " #define MSG_RESEND "Resend:"
#define MSG_Z_MIN "z_min: " #define MSG_UNKNOWN_COMMAND "Unknown command:\""
#define MSG_Z_MAX "z_max: " #define MSG_ACTIVE_EXTRUDER "Active Extruder: "
#define MSG_M119_REPORT "Reporting endstop status" #define MSG_INVALID_EXTRUDER "Invalid extruder"
#define MSG_ENDSTOP_HIT "TRIGGERED" #define MSG_X_MIN "x_min: "
#define MSG_ENDSTOP_OPEN "open" #define MSG_X_MAX "x_max: "
#define MSG_Y_MIN "y_min: "
#define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir" #define MSG_Y_MAX "y_max: "
#define MSG_SD_INIT_FAIL "SD init fail" #define MSG_Z_MIN "z_min: "
#define MSG_SD_VOL_INIT_FAIL "volume.init failed" #define MSG_Z_MAX "z_max: "
#define MSG_SD_OPENROOT_FAIL "openRoot failed" #define MSG_M119_REPORT "Reporting endstop status"
#define MSG_SD_CARD_OK "SD card ok" #define MSG_ENDSTOP_HIT "TRIGGERED"
#define MSG_SD_WORKDIR_FAIL "workDir open failed" #define MSG_ENDSTOP_OPEN "open"
#define MSG_SD_OPEN_FILE_FAIL "open failed, File: " #define MSG_HOTEND_OFFSET "Hotend offsets:"
#define MSG_SD_FILE_OPENED "File opened:"
#define MSG_SD_SIZE " Size:" #define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
#define MSG_SD_FILE_SELECTED "File selected" #define MSG_SD_INIT_FAIL "SD init fail"
#define MSG_SD_WRITE_TO_FILE "Writing to file: " #define MSG_SD_VOL_INIT_FAIL "volume.init failed"
#define MSG_SD_PRINTING_BYTE "SD printing byte " #define MSG_SD_OPENROOT_FAIL "openRoot failed"
#define MSG_SD_NOT_PRINTING "Not SD printing" #define MSG_SD_CARD_OK "SD card ok"
#define MSG_SD_ERR_WRITE_TO_FILE "error writing to file" #define MSG_SD_WORKDIR_FAIL "workDir open failed"
#define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir:" #define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
#define MSG_SD_FILE_OPENED "File opened:"
#define MSG_STEPPER_TO_HIGH "Steprate to high : " #define MSG_SD_SIZE " Size:"
#define MSG_ENDSTOPS_HIT "endstops hit: " #define MSG_SD_FILE_SELECTED "File selected"
#define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented" #define MSG_SD_WRITE_TO_FILE "Writing to file: "
#define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented" #define MSG_SD_PRINTING_BYTE "SD printing byte "
#define MSG_SD_NOT_PRINTING "Not SD printing"
#endif #define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
#define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir:"
#if LANGUAGE_CHOICE == 5 #define MSG_STEPPER_TO_HIGH "Steprate to high : "
#define MSG_ENDSTOPS_HIT "endstops hit: "
// LCD Menu Messages #define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
#define WELCOME_MSG MACHINE_NAME " Lista." #define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"
#define MSG_SD_INSERTED "Tarjeta SD Colocada"
#define MSG_SD_REMOVED "Tarjeta SD Retirada" #endif
#define MSG_MAIN " Menu Principal \003"
#define MSG_AUTOSTART " Autostart"
#define MSG_DISABLE_STEPPERS " Apagar Motores" #if LANGUAGE_CHOICE == 5
#define MSG_AUTO_HOME " Llevar Ejes al Cero"
#define MSG_SET_ORIGIN " Establecer Cero" // LCD Menu Messages
#define MSG_COOLDOWN " Enfriar" #define WELCOME_MSG MACHINE_NAME " Lista."
#define MSG_EXTRUDE " Extruir" #define MSG_SD_INSERTED "Tarjeta SD Colocada"
#define MSG_RETRACT " Retraer" #define MSG_SD_REMOVED "Tarjeta SD Retirada"
#define MSG_PREHEAT_PLA " Precalentar PLA" #define MSG_MAIN " Menu Principal \003"
#define MSG_PREHEAT_PLA_SETTINGS " Ajustar temp. PLA" #define MSG_AUTOSTART " Autostart"
#define MSG_PREHEAT_ABS " Precalentar ABS" #define MSG_DISABLE_STEPPERS " Apagar Motores"
#define MSG_PREHEAT_ABS_SETTINGS " Ajustar temp. ABS" #define MSG_AUTO_HOME " Llevar Ejes al Cero"
#define MSG_MOVE_AXIS " Mover Ejes \x7E" #define MSG_SET_ORIGIN " Establecer Cero"
#define MSG_SPEED " Velocidad:" #define MSG_COOLDOWN " Enfriar"
#define MSG_NOZZLE " \002Nozzle:" #define MSG_EXTRUDE " Extruir"
#define MSG_NOZZLE1 " \002Nozzle2:" #define MSG_RETRACT " Retraer"
#define MSG_NOZZLE2 " \002Nozzle3:" #define MSG_PREHEAT_PLA " Precalentar PLA"
#define MSG_BED " \002Base:" #define MSG_PREHEAT_PLA_SETTINGS " Ajustar temp. PLA"
#define MSG_FAN_SPEED " Ventilador:" #define MSG_PREHEAT_ABS " Precalentar ABS"
#define MSG_FLOW " Flujo:" #define MSG_PREHEAT_ABS_SETTINGS " Ajustar temp. ABS"
#define MSG_CONTROL " Control \003" #define MSG_MOVE_AXIS " Mover Ejes \x7E"
#define MSG_MIN " \002 Min:" #define MSG_SPEED " Velocidad:"
#define MSG_MAX " \002 Max:" #define MSG_NOZZLE " \002Nozzle:"
#define MSG_FACTOR " \002 Fact:" #define MSG_NOZZLE1 " \002Nozzle2:"
#define MSG_AUTOTEMP " Autotemp:" #define MSG_NOZZLE2 " \002Nozzle3:"
#define MSG_ON "On " #define MSG_BED " \002Base:"
#define MSG_OFF "Off" #define MSG_FAN_SPEED " Ventilador:"
#define MSG_PID_P " PID-P: " #define MSG_FLOW " Flujo:"
#define MSG_PID_I " PID-I: " #define MSG_CONTROL " Control \003"
#define MSG_PID_D " PID-D: " #define MSG_MIN " \002 Min:"
#define MSG_PID_C " PID-C: " #define MSG_MAX " \002 Max:"
#define MSG_ACC " Acc:" #define MSG_FACTOR " \002 Fact:"
#define MSG_VXY_JERK " Vxy-jerk: " #define MSG_AUTOTEMP " Autotemp:"
#define MSG_VMAX " Vmax " #define MSG_ON "On "
#define MSG_X "x:" #define MSG_OFF "Off"
#define MSG_Y "y:" #define MSG_PID_P " PID-P: "
#define MSG_Z "z:" #define MSG_PID_I " PID-I: "
#define MSG_E "e:" #define MSG_PID_D " PID-D: "
#define MSG_VMIN " Vmin:" #define MSG_PID_C " PID-C: "
#define MSG_VTRAV_MIN " VTrav min:" #define MSG_ACC " Acc:"
#define MSG_AMAX " Amax " #define MSG_VXY_JERK " Vxy-jerk: "
#define MSG_A_RETRACT " A-retrac.:" #define MSG_VMAX " Vmax "
#define MSG_XSTEPS " Xpasos/mm:" #define MSG_X "x:"
#define MSG_YSTEPS " Ypasos/mm:" #define MSG_Y "y:"
#define MSG_ZSTEPS " Zpasos/mm:" #define MSG_Z "z:"
#define MSG_ESTEPS " Epasos/mm:" #define MSG_E "e:"
#define MSG_MAIN_WIDE " Menu Principal \003" #define MSG_VMIN " Vmin:"
#define MSG_RECTRACT_WIDE " Retraer \x7E" #define MSG_VTRAV_MIN " VTrav min:"
#define MSG_TEMPERATURE_WIDE " Temperatura \x7E" #define MSG_AMAX " Amax "
#define MSG_TEMPERATURE_RTN " Temperatura \003" #define MSG_A_RETRACT " A-retrac.:"
#define MSG_MOTION_WIDE " Movimiento \x7E" #define MSG_XSTEPS " Xpasos/mm:"
#define MSG_STORE_EPROM " Guardar Memoria" #define MSG_YSTEPS " Ypasos/mm:"
#define MSG_LOAD_EPROM " Cargar Memoria" #define MSG_ZSTEPS " Zpasos/mm:"
#define MSG_RESTORE_FAILSAFE " Rest. de emergencia" #define MSG_ESTEPS " Epasos/mm:"
#define MSG_REFRESH "\004Volver a cargar" #define MSG_MAIN_WIDE " Menu Principal \003"
#define MSG_WATCH " Monitorizar \003" #define MSG_RECTRACT_WIDE " Retraer \x7E"
#define MSG_PREPARE " Preparar \x7E" #define MSG_TEMPERATURE_WIDE " Temperatura \x7E"
#define MSG_PREPARE_ALT " Preparar \003" #define MSG_TEMPERATURE_RTN " Temperatura \003"
#define MSG_CONTROL_ARROW " Control \x7E" #define MSG_MOTION_WIDE " Movimiento \x7E"
#define MSG_RETRACT_ARROW " Retraer \x7E" #define MSG_STORE_EPROM " Guardar Memoria"
#define MSG_TUNE " Ajustar \x7E" #define MSG_LOAD_EPROM " Cargar Memoria"
#define MSG_PAUSE_PRINT " Pausar Impresion \x7E" #define MSG_RESTORE_FAILSAFE " Rest. de emergencia"
#define MSG_RESUME_PRINT " Reanudar Impresion \x7E" #define MSG_REFRESH "\004Volver a cargar"
#define MSG_STOP_PRINT " Detener Impresion \x7E" #define MSG_WATCH " Monitorizar \003"
#define MSG_CARD_MENU " Menu de SD \x7E" #define MSG_PREPARE " Preparar \x7E"
#define MSG_NO_CARD " No hay Tarjeta SD" #define MSG_PREPARE_ALT " Preparar \003"
#define MSG_DWELL "Reposo..." #define MSG_CONTROL_ARROW " Control \x7E"
#define MSG_USERWAIT "Esperando Ordenes..." #define MSG_RETRACT_ARROW " Retraer \x7E"
#define MSG_NO_MOVE "Sin movimiento" #define MSG_TUNE " Ajustar \x7E"
#define MSG_PART_RELEASE "Desacople Parcial" #define MSG_PAUSE_PRINT " Pausar Impresion \x7E"
#define MSG_KILLED "PARADA DE EMERGENCIA. " #define MSG_RESUME_PRINT " Reanudar Impresion \x7E"
#define MSG_STOPPED "PARADA. " #define MSG_STOP_PRINT " Detener Impresion \x7E"
#define MSG_STEPPER_RELEASED "Desacoplada." #define MSG_CARD_MENU " Menu de SD \x7E"
#define MSG_CONTROL_RETRACT " Retraer mm:" #define MSG_NO_CARD " No hay Tarjeta SD"
#define MSG_CONTROL_RETRACTF " Retraer F:" #define MSG_DWELL "Reposo..."
#define MSG_CONTROL_RETRACT_ZLIFT " Levantar mm:" #define MSG_USERWAIT "Esperando Ordenes..."
#define MSG_CONTROL_RETRACT_RECOVER " DesRet +mm:" #define MSG_NO_MOVE "Sin movimiento"
#define MSG_CONTROL_RETRACT_RECOVERF " DesRet F:" #define MSG_PART_RELEASE "Desacople Parcial"
#define MSG_AUTORETRACT " AutoRetr.:" #define MSG_KILLED "PARADA DE EMERGENCIA. "
#define MSG_FILAMENTCHANGE "Change filament" #define MSG_STOPPED "PARADA. "
// Serial Console Messages #define MSG_STEPPER_RELEASED "Desacoplada."
#define MSG_CONTROL_RETRACT " Retraer mm:"
#define MSG_Enqueing "En cola \"" #define MSG_CONTROL_RETRACTF " Retraer F:"
#define MSG_POWERUP "PowerUp" #define MSG_CONTROL_RETRACT_ZLIFT " Levantar mm:"
#define MSG_EXTERNAL_RESET " Reset Externo" #define MSG_CONTROL_RETRACT_RECOVER " DesRet +mm:"
#define MSG_BROWNOUT_RESET " Reset por Voltaje Incorrecto" #define MSG_CONTROL_RETRACT_RECOVERF " DesRet F:"
#define MSG_WATCHDOG_RESET " Reset por Bloqueo" #define MSG_AUTORETRACT " AutoRetr.:"
#define MSG_SOFTWARE_RESET " Reset por Software" #define MSG_FILAMENTCHANGE "Change filament"
#define MSG_MARLIN "Marlin " // Serial Console Messages
#define MSG_AUTHOR " | Autor: "
#define MSG_CONFIGURATION_VER " Ultima actualizacion: " #define MSG_Enqueing "En cola \""
#define MSG_FREE_MEMORY " Memoria libre: " #define MSG_POWERUP "PowerUp"
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " #define MSG_EXTERNAL_RESET " Reset Externo"
#define MSG_OK "ok" #define MSG_BROWNOUT_RESET " Reset por Voltaje Incorrecto"
#define MSG_FILE_SAVED "Guardado." #define MSG_WATCHDOG_RESET " Reset por Bloqueo"
#define MSG_ERR_LINE_NO "El Numero de Linea no es igual al Ultimo Numero de Linea+1, Ultima Linea:" #define MSG_SOFTWARE_RESET " Reset por Software"
#define MSG_ERR_CHECKSUM_MISMATCH "el checksum no coincide, Ultima Linea:" #define MSG_MARLIN "Marlin "
#define MSG_ERR_NO_CHECKSUM "No se pudo hallar el Checksum con el numero de linea, Ultima Linea:" #define MSG_AUTHOR " | Autor: "
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No se hallo el Numero de Linea con el Checksum, Ultima Linea:" #define MSG_CONFIGURATION_VER " Ultima actualizacion: "
#define MSG_FILE_PRINTED "Impresion terminada" #define MSG_FREE_MEMORY " Memoria libre: "
#define MSG_BEGIN_FILE_LIST "Comienzo de la lista de archivos" #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
#define MSG_END_FILE_LIST "Fin de la lista de archivos" #define MSG_OK "ok"
#define MSG_M104_INVALID_EXTRUDER "M104 Extrusor Invalido " #define MSG_FILE_SAVED "Guardado."
#define MSG_M105_INVALID_EXTRUDER "M105 Extrusor Invalido " #define MSG_ERR_LINE_NO "El Numero de Linea no es igual al Ultimo Numero de Linea+1, Ultima Linea:"
#define MSG_ERR_NO_THERMISTORS "No hay termistores - no temp" #define MSG_ERR_CHECKSUM_MISMATCH "el checksum no coincide, Ultima Linea:"
#define MSG_M109_INVALID_EXTRUDER "M109 Extrusor Invalido " #define MSG_ERR_NO_CHECKSUM "No se pudo hallar el Checksum con el numero de linea, Ultima Linea:"
#define MSG_HEATING "Calentando..." #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No se hallo el Numero de Linea con el Checksum, Ultima Linea:"
#define MSG_HEATING_COMPLETE "Calentamiento Hecho." #define MSG_FILE_PRINTED "Impresion terminada"
#define MSG_BED_HEATING "Calentando la base." #define MSG_BEGIN_FILE_LIST "Comienzo de la lista de archivos"
#define MSG_BED_DONE "Base Caliente." #define MSG_END_FILE_LIST "Fin de la lista de archivos"
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" #define MSG_M104_INVALID_EXTRUDER "M104 Extrusor Invalido "
#define MSG_COUNT_X " Cuenta X:" #define MSG_M105_INVALID_EXTRUDER "M105 Extrusor Invalido "
#define MSG_ERR_KILLED "¡¡Impresora Parada con kill()!!" #define MSG_M218_INVALID_EXTRUDER "M218 Extrusor Invalido "
#define MSG_ERR_STOPPED "¡Impresora parada por errores. Arregle el error y use M999 Para reiniciar!. (La temperatura se reestablece. Ajustela antes de continuar)" #define MSG_ERR_NO_THERMISTORS "No hay termistores - no temp"
#define MSG_RESEND "Reenviar:" #define MSG_M109_INVALID_EXTRUDER "M109 Extrusor Invalido "
#define MSG_UNKNOWN_COMMAND "Comando Desconocido:\"" #define MSG_HEATING "Calentando..."
#define MSG_ACTIVE_EXTRUDER "Extrusor Activo: " #define MSG_HEATING_COMPLETE "Calentamiento Hecho."
#define MSG_INVALID_EXTRUDER "Extrusor Invalido" #define MSG_BED_HEATING "Calentando la base."
#define MSG_X_MIN "x_min: " #define MSG_BED_DONE "Base Caliente."
#define MSG_X_MAX "x_max: " #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
#define MSG_Y_MIN "y_min: " #define MSG_COUNT_X " Cuenta X:"
#define MSG_Y_MAX "y_max: " #define MSG_ERR_KILLED "¡¡Impresora Parada con kill()!!"
#define MSG_Z_MIN "z_min: " #define MSG_ERR_STOPPED "¡Impresora parada por errores. Arregle el error y use M999 Para reiniciar!. (La temperatura se reestablece. Ajustela antes de continuar)"
#define MSG_M119_REPORT "Comprobando fines de carrera." #define MSG_RESEND "Reenviar:"
#define MSG_ENDSTOP_HIT "PULSADO" #define MSG_UNKNOWN_COMMAND "Comando Desconocido:\""
#define MSG_ENDSTOP_OPEN "abierto" #define MSG_ACTIVE_EXTRUDER "Extrusor Activo: "
#define MSG_INVALID_EXTRUDER "Extrusor Invalido"
#define MSG_SD_CANT_OPEN_SUBDIR "No se pudo abrir la subcarpeta." #define MSG_X_MIN "x_min: "
#define MSG_SD_INIT_FAIL "Fallo al iniciar la SD" #define MSG_X_MAX "x_max: "
#define MSG_SD_VOL_INIT_FAIL "Fallo al montar el volumen" #define MSG_Y_MIN "y_min: "
#define MSG_SD_OPENROOT_FAIL "Fallo al abrir la carpeta raiz" #define MSG_Y_MAX "y_max: "
#define MSG_SD_CARD_OK "Tarjeta SD OK" #define MSG_Z_MIN "z_min: "
#define MSG_SD_WORKDIR_FAIL "Fallo al abrir la carpeta de trabajo" #define MSG_M119_REPORT "Comprobando fines de carrera."
#define MSG_SD_OPEN_FILE_FAIL "Error al abrir, Archivo: " #define MSG_ENDSTOP_HIT "PULSADO"
#define MSG_SD_FILE_OPENED "Archivo abierto:" #define MSG_ENDSTOP_OPEN "abierto"
#define MSG_SD_SIZE " Tamaño:" #define MSG_HOTEND_OFFSET "Hotend offsets:"
#define MSG_SD_FILE_SELECTED "Archivo Seleccionado"
#define MSG_SD_WRITE_TO_FILE "Escribiendo en el archivo: " #define MSG_SD_CANT_OPEN_SUBDIR "No se pudo abrir la subcarpeta."
#define MSG_SD_PRINTING_BYTE "SD imprimiendo el byte " #define MSG_SD_INIT_FAIL "Fallo al iniciar la SD"
#define MSG_SD_NOT_PRINTING "No se esta imprimiendo con SD" #define MSG_SD_VOL_INIT_FAIL "Fallo al montar el volumen"
#define MSG_SD_ERR_WRITE_TO_FILE "Error al escribir en el archivo" #define MSG_SD_OPENROOT_FAIL "Fallo al abrir la carpeta raiz"
#define MSG_SD_CANT_ENTER_SUBDIR "No se puede abrir la carpeta:" #define MSG_SD_CARD_OK "Tarjeta SD OK"
#define MSG_SD_WORKDIR_FAIL "Fallo al abrir la carpeta de trabajo"
#define MSG_STEPPER_TO_HIGH "Steprate demasiado alto : " #define MSG_SD_OPEN_FILE_FAIL "Error al abrir, Archivo: "
#define MSG_ENDSTOPS_HIT "Se ha tocado el fin de carril: " #define MSG_SD_FILE_OPENED "Archivo abierto:"
#define MSG_ERR_COLD_EXTRUDE_STOP " extrusion fria evitada" #define MSG_SD_SIZE " Tamaño:"
#define MSG_ERR_LONG_EXTRUDE_STOP " extrusion demasiado larga evitada" #define MSG_SD_FILE_SELECTED "Archivo Seleccionado"
#define MSG_SD_WRITE_TO_FILE "Escribiendo en el archivo: "
#endif #define MSG_SD_PRINTING_BYTE "SD imprimiendo el byte "
#define MSG_SD_NOT_PRINTING "No se esta imprimiendo con SD"
#if LANGUAGE_CHOICE == 6 #define MSG_SD_ERR_WRITE_TO_FILE "Error al escribir en el archivo"
#define MSG_SD_CANT_ENTER_SUBDIR "No se puede abrir la carpeta:"
// LCD Menu Messages
#define WELCOME_MSG MACHINE_NAME " Готов" #define MSG_STEPPER_TO_HIGH "Steprate demasiado alto : "
#define MSG_SD_INSERTED "Карта вставлена" #define MSG_ENDSTOPS_HIT "Se ha tocado el fin de carril: "
#define MSG_SD_REMOVED "Карта извлечена" #define MSG_ERR_COLD_EXTRUDE_STOP " extrusion fria evitada"
#define MSG_MAIN " Меню \003" #define MSG_ERR_LONG_EXTRUDE_STOP " extrusion demasiado larga evitada"
#define MSG_AUTOSTART " Автостарт "
#define MSG_DISABLE_STEPPERS " Выключить двигатели" #endif
#define MSG_AUTO_HOME " Парковка "
#define MSG_SET_ORIGIN " Запомнить ноль " #if LANGUAGE_CHOICE == 6
#define MSG_PREHEAT_PLA " Преднагрев PLA "
#define MSG_PREHEAT_PLA_SETTINGS " Настр. преднагр.PLA" // LCD Menu Messages
#define MSG_PREHEAT_ABS " Преднагрев ABS " #define WELCOME_MSG MACHINE_NAME " Готов"
#define MSG_PREHEAT_ABS_SETTINGS " Настр. преднагр.ABS" #define MSG_SD_INSERTED "Карта вставлена"
#define MSG_COOLDOWN " Охлаждение " #define MSG_SD_REMOVED "Карта извлечена"
#define MSG_EXTRUDE " Экструзия " #define MSG_MAIN " Меню \003"
#define MSG_RETRACT " Откат" #define MSG_AUTOSTART " Автостарт "
#define MSG_MOVE_AXIS " Движение по осям \x7E" #define MSG_DISABLE_STEPPERS " Выключить двигатели"
#define MSG_SPEED " Скорость:" #define MSG_AUTO_HOME " Парковка "
#define MSG_NOZZLE " \002 Фильера:" #define MSG_SET_ORIGIN " Запомнить ноль "
#define MSG_NOZZLE1 " \002 Фильера2:" #define MSG_PREHEAT_PLA " Преднагрев PLA "
#define MSG_NOZZLE2 " \002 Фильера3:" #define MSG_PREHEAT_PLA_SETTINGS " Настр. преднагр.PLA"
#define MSG_BED " \002 Кровать:" #define MSG_PREHEAT_ABS " Преднагрев ABS "
#define MSG_FAN_SPEED " Куллер:" #define MSG_PREHEAT_ABS_SETTINGS " Настр. преднагр.ABS"
#define MSG_FLOW " Поток:" #define MSG_COOLDOWN " Охлаждение "
#define MSG_CONTROL " Настройки \003" #define MSG_EXTRUDE " Экструзия "
#define MSG_MIN " \002 Минимум:" #define MSG_RETRACT " Откат"
#define MSG_MAX " \002 Максимум:" #define MSG_MOVE_AXIS " Движение по осям \x7E"
#define MSG_FACTOR " \002 Фактор:" #define MSG_SPEED " Скорость:"
#define MSG_AUTOTEMP " Autotemp:" #define MSG_NOZZLE " \002 Фильера:"
#define MSG_ON "Вкл. " #define MSG_NOZZLE1 " \002 Фильера2:"
#define MSG_OFF "Выкл. " #define MSG_NOZZLE2 " \002 Фильера3:"
#define MSG_PID_P " PID-P: " #define MSG_BED " \002 Кровать:"
#define MSG_PID_I " PID-I: " #define MSG_FAN_SPEED " Куллер:"
#define MSG_PID_D " PID-D: " #define MSG_FLOW " Поток:"
#define MSG_PID_C " PID-C: " #define MSG_CONTROL " Настройки \003"
#define MSG_ACC " Acc:" #define MSG_MIN " \002 Минимум:"
#define MSG_VXY_JERK " Vxy-jerk: " #define MSG_MAX " \002 Максимум:"
#define MSG_VMAX " Vmax " #define MSG_FACTOR " \002 Фактор:"
#define MSG_X "x:" #define MSG_AUTOTEMP " Autotemp:"
#define MSG_Y "y:" #define MSG_ON "Вкл. "
#define MSG_Z "z:" #define MSG_OFF "Выкл. "
#define MSG_E "e:" #define MSG_PID_P " PID-P: "
#define MSG_VMIN " Vmin:" #define MSG_PID_I " PID-I: "
#define MSG_VTRAV_MIN " VTrav min:" #define MSG_PID_D " PID-D: "
#define MSG_AMAX " Amax " #define MSG_PID_C " PID-C: "
#define MSG_A_RETRACT " A-retract:" #define MSG_ACC " Acc:"
#define MSG_XSTEPS " X шаг/mm:" #define MSG_VXY_JERK " Vxy-jerk: "
#define MSG_YSTEPS " Y шаг/mm:" #define MSG_VMAX " Vmax "
#define MSG_ZSTEPS " Z шаг/mm:" #define MSG_X "x:"
#define MSG_ESTEPS " E шаг/mm:" #define MSG_Y "y:"
#define MSG_RECTRACT " Откат подачи \x7E" #define MSG_Z "z:"
#define MSG_TEMPERATURE " Температура \x7E" #define MSG_E "e:"
#define MSG_MOTION " Скорости \x7E" #define MSG_VMIN " Vmin:"
#define MSG_STORE_EPROM " Сохранить настройки" #define MSG_VTRAV_MIN " VTrav min:"
#define MSG_LOAD_EPROM " Загрузить настройки" #define MSG_AMAX " Amax "
#define MSG_RESTORE_FAILSAFE " Сброс настроек " #define MSG_A_RETRACT " A-retract:"
#define MSG_REFRESH "\004Обновить " #define MSG_XSTEPS " X шаг/mm:"
#define MSG_WATCH " Обзор \003" #define MSG_YSTEPS " Y шаг/mm:"
#define MSG_PREPARE " Действия \x7E" #define MSG_ZSTEPS " Z шаг/mm:"
#define MSG_TUNE " Настройки \x7E" #define MSG_ESTEPS " E шаг/mm:"
#define MSG_PAUSE_PRINT " Пауза печати \x7E" #define MSG_RECTRACT " Откат подачи \x7E"
#define MSG_RESUME_PRINT " Продолжить печать \x7E" #define MSG_TEMPERATURE " Температура \x7E"
#define MSG_STOP_PRINT " Остановить печать \x7E" #define MSG_MOTION " Скорости \x7E"
#define MSG_CARD_MENU " Меню карты \x7E" #define MSG_STORE_EPROM " Сохранить настройки"
#define MSG_NO_CARD " Нет карты" #define MSG_LOAD_EPROM " Загрузить настройки"
#define MSG_DWELL "Сон..." #define MSG_RESTORE_FAILSAFE " Сброс настроек "
#define MSG_USERWAIT "Нажмите для продолж." #define MSG_REFRESH "\004Обновить "
#define MSG_NO_MOVE "Нет движения. " #define MSG_WATCH " Обзор \003"
#define MSG_PART_RELEASE " Извлечение принта " #define MSG_PREPARE " Действия \x7E"
#define MSG_KILLED "УБИТО. " #define MSG_TUNE " Настройки \x7E"
#define MSG_STOPPED "ОСТАНОВЛЕНО. " #define MSG_PAUSE_PRINT " Пауза печати \x7E"
#define MSG_CONTROL_RETRACT " Откат mm:" #define MSG_RESUME_PRINT " Продолжить печать \x7E"
#define MSG_CONTROL_RETRACTF " Откат F:" #define MSG_STOP_PRINT " Остановить печать \x7E"
#define MSG_CONTROL_RETRACT_ZLIFT " Прыжок mm:" #define MSG_CARD_MENU " Меню карты \x7E"
#define MSG_CONTROL_RETRACT_RECOVER " Возврат +mm:" #define MSG_NO_CARD " Нет карты"
#define MSG_CONTROL_RETRACT_RECOVERF " Возврат F:" #define MSG_DWELL "Сон..."
#define MSG_AUTORETRACT " АвтоОткат:" #define MSG_USERWAIT "Нажмите для продолж."
#define MSG_FILAMENTCHANGE "Change filament" #define MSG_NO_MOVE "Нет движения. "
#define MSG_PART_RELEASE " Извлечение принта "
// Serial Console Messages #define MSG_KILLED "УБИТО. "
#define MSG_STOPPED "ОСТАНОВЛЕНО. "
#define MSG_Enqueing "Запланировано \"" #define MSG_CONTROL_RETRACT " Откат mm:"
#define MSG_POWERUP "Включение питания" #define MSG_CONTROL_RETRACTF " Откат F:"
#define MSG_EXTERNAL_RESET " Внешний сброс" #define MSG_CONTROL_RETRACT_ZLIFT " Прыжок mm:"
#define MSG_BROWNOUT_RESET " Brown out сброс" #define MSG_CONTROL_RETRACT_RECOVER " Возврат +mm:"
#define MSG_WATCHDOG_RESET " Watchdog сброс" #define MSG_CONTROL_RETRACT_RECOVERF " Возврат F:"
#define MSG_SOFTWARE_RESET " программный сброс" #define MSG_AUTORETRACT " АвтоОткат:"
#define MSG_MARLIN "Marlin " #define MSG_FILAMENTCHANGE "Change filament"
#define MSG_AUTHOR " | Автор: "
#define MSG_CONFIGURATION_VER " Последнее обновление: " // Serial Console Messages
#define MSG_FREE_MEMORY " Памяти свободно: "
#define MSG_PLANNER_BUFFER_BYTES " Буффер очереди команд Bytes: " #define MSG_Enqueing "Запланировано \""
#define MSG_OK "ok" #define MSG_POWERUP "Включение питания"
#define MSG_FILE_SAVED "Файл записан." #define MSG_EXTERNAL_RESET " Внешний сброс"
#define MSG_ERR_LINE_NO "Номен строки это не последняя строка+1, последняя строка:" #define MSG_BROWNOUT_RESET " Brown out сброс"
#define MSG_ERR_CHECKSUM_MISMATCH "контрольная сумма не совпадает, последняя строка:" #define MSG_WATCHDOG_RESET " Watchdog сброс"
#define MSG_ERR_NO_CHECKSUM "нет контрольной суммы для строки, последняя строка:" #define MSG_SOFTWARE_RESET " программный сброс"
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "нет строки для контрольной суммы, последняя строка:" #define MSG_MARLIN "Marlin "
#define MSG_FILE_PRINTED "Печать файла завершена" #define MSG_AUTHOR " | Автор: "
#define MSG_BEGIN_FILE_LIST "Список файлов" #define MSG_CONFIGURATION_VER " Последнее обновление: "
#define MSG_END_FILE_LIST "Конец списка файлов" #define MSG_FREE_MEMORY " Памяти свободно: "
#define MSG_M104_INVALID_EXTRUDER "M104 ошибка экструдера " #define MSG_PLANNER_BUFFER_BYTES " Буффер очереди команд Bytes: "
#define MSG_M105_INVALID_EXTRUDER "M105 ошибка экструдера " #define MSG_OK "ok"
#define MSG_ERR_NO_THERMISTORS "Нет термистра - нет температуры" #define MSG_FILE_SAVED "Файл записан."
#define MSG_M109_INVALID_EXTRUDER "M109 ошибка экструдера " #define MSG_ERR_LINE_NO "Номен строки это не последняя строка+1, последняя строка:"
#define MSG_HEATING "Нагрев... " #define MSG_ERR_CHECKSUM_MISMATCH "контрольная сумма не совпадает, последняя строка:"
#define MSG_HEATING_COMPLETE "Наргето. " #define MSG_ERR_NO_CHECKSUM "нет контрольной суммы для строки, последняя строка:"
#define MSG_BED_HEATING "Нагрев стола... " #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "нет строки для контрольной суммы, последняя строка:"
#define MSG_BED_DONE "Стол нагрет. " #define MSG_FILE_PRINTED "Печать файла завершена"
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" #define MSG_BEGIN_FILE_LIST "Список файлов"
#define MSG_COUNT_X " Count X:" #define MSG_END_FILE_LIST "Конец списка файлов"
#define MSG_ERR_KILLED "Принтер остановлен. вызов kill() !!" #define MSG_M104_INVALID_EXTRUDER "M104 ошибка экструдера "
#define MSG_ERR_STOPPED "Ошибка принтера, останов. Устраните неисправность и используйте M999 для перезагрузки!. (Температура недоступна. Проверьте датчики)" #define MSG_M105_INVALID_EXTRUDER "M105 ошибка экструдера "
#define MSG_RESEND "Переотправка:" #define MSG_M218_INVALID_EXTRUDER "M218 ошибка экструдера "
#define MSG_UNKNOWN_COMMAND "Неизвестная команда:\"" #define MSG_ERR_NO_THERMISTORS "Нет термистра - нет температуры"
#define MSG_ACTIVE_EXTRUDER "Активный экструдер: " #define MSG_M109_INVALID_EXTRUDER "M109 ошибка экструдера "
#define MSG_INVALID_EXTRUDER "Ошибка экструдера" #define MSG_HEATING "Нагрев... "
#define MSG_X_MIN "x_min:" #define MSG_HEATING_COMPLETE "Наргето. "
#define MSG_X_MAX "x_max:" #define MSG_BED_HEATING "Нагрев стола... "
#define MSG_Y_MIN "y_min:" #define MSG_BED_DONE "Стол нагрет. "
#define MSG_Y_MAX "y_max:" #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
#define MSG_Z_MIN "z_min:" #define MSG_COUNT_X " Count X:"
#define MSG_Z_MAX "z_max:" #define MSG_ERR_KILLED "Принтер остановлен. вызов kill() !!"
#define MSG_M119_REPORT "Статус концевиков" #define MSG_ERR_STOPPED "Ошибка принтера, останов. Устраните неисправность и используйте M999 для перезагрузки!. (Температура недоступна. Проверьте датчики)"
#define MSG_ENDSTOP_HIT "Срабатывание концевика" #define MSG_RESEND "Переотправка:"
#define MSG_ENDSTOP_OPEN "Концевик освобожден" #define MSG_UNKNOWN_COMMAND "Неизвестная команда:\""
#define MSG_SD_CANT_OPEN_SUBDIR "Не открыть папку" #define MSG_ACTIVE_EXTRUDER "Активный экструдер: "
#define MSG_SD_INIT_FAIL "Ошибка инициализации SD" #define MSG_INVALID_EXTRUDER "Ошибка экструдера"
#define MSG_SD_VOL_INIT_FAIL "Ошибка инициализации раздела" #define MSG_X_MIN "x_min:"
#define MSG_SD_OPENROOT_FAIL "Не прочесть содержимое корня" #define MSG_X_MAX "x_max:"
#define MSG_SD_CARD_OK "SD карта в порядке" #define MSG_Y_MIN "y_min:"
#define MSG_SD_WORKDIR_FAIL "не открыть рабочую папку" #define MSG_Y_MAX "y_max:"
#define MSG_SD_OPEN_FILE_FAIL "Ошибка чтения, файл: " #define MSG_Z_MIN "z_min:"
#define MSG_SD_FILE_OPENED "Файл открыт:" #define MSG_Z_MAX "z_max:"
#define MSG_SD_SIZE " Размер:" #define MSG_M119_REPORT "Статус концевиков"
#define MSG_SD_FILE_SELECTED "Файл выбран" #define MSG_ENDSTOP_HIT "Срабатывание концевика"
#define MSG_SD_WRITE_TO_FILE "Запись в файл: " #define MSG_ENDSTOP_OPEN "Концевик освобожден"
#define MSG_SD_PRINTING_BYTE "SD печать byte " #define MSG_HOTEND_OFFSET "Hotend offsets:"
#define MSG_SD_NOT_PRINTING "нет SD печати" #define MSG_SD_CANT_OPEN_SUBDIR "Не открыть папку"
#define MSG_SD_ERR_WRITE_TO_FILE "ошибка записи в файл" #define MSG_SD_INIT_FAIL "Ошибка инициализации SD"
#define MSG_SD_CANT_ENTER_SUBDIR "Не зайти в папку:" #define MSG_SD_VOL_INIT_FAIL "Ошибка инициализации раздела"
#define MSG_STEPPER_TO_HIGH "Частота шагов очень высока : " #define MSG_SD_OPENROOT_FAIL "Не прочесть содержимое корня"
#define MSG_ENDSTOPS_HIT "концевик сработал: " #define MSG_SD_CARD_OK "SD карта в порядке"
#define MSG_ERR_COLD_EXTRUDE_STOP " защита холодной экструзии" #define MSG_SD_WORKDIR_FAIL "не открыть рабочую папку"
#define MSG_ERR_LONG_EXTRUDE_STOP " защита превышения длинны экструзии" #define MSG_SD_OPEN_FILE_FAIL "Ошибка чтения, файл: "
#define MSG_SD_FILE_OPENED "Файл открыт:"
#endif #define MSG_SD_SIZE " Размер:"
#define MSG_SD_FILE_SELECTED "Файл выбран"
#define MSG_SD_WRITE_TO_FILE "Запись в файл: "
#if LANGUAGE_CHOICE == 7 #define MSG_SD_PRINTING_BYTE "SD печать byte "
#define MSG_SD_NOT_PRINTING "нет SD печати"
// LCD Menu Messages #define MSG_SD_ERR_WRITE_TO_FILE "ошибка записи в файл"
#define WELCOME_MSG MACHINE_NAME " Pronto." #define MSG_SD_CANT_ENTER_SUBDIR "Не зайти в папку:"
#define MSG_SD_INSERTED "SD Card inserita" #define MSG_STEPPER_TO_HIGH "Частота шагов очень высока : "
#define MSG_SD_REMOVED "SD Card rimossa" #define MSG_ENDSTOPS_HIT "концевик сработал: "
#define MSG_MAIN "Menu principale" #define MSG_ERR_COLD_EXTRUDE_STOP " защита холодной экструзии"
#define MSG_AUTOSTART "Autostart" #define MSG_ERR_LONG_EXTRUDE_STOP " защита превышения длинны экструзии"
#define MSG_DISABLE_STEPPERS "Disabilita Motori"
#define MSG_AUTO_HOME "Auto Home" #endif
#define MSG_SET_ORIGIN "Imposta Origine"
#define MSG_PREHEAT_PLA "Preriscalda PLA"
#define MSG_PREHEAT_PLA_SETTINGS "Preris. PLA Conf" #if LANGUAGE_CHOICE == 7
#define MSG_PREHEAT_ABS "Preriscalda ABS"
#define MSG_PREHEAT_ABS_SETTINGS "Preris. ABS Conf" // LCD Menu Messages
#define MSG_COOLDOWN "Rafredda" #define WELCOME_MSG MACHINE_NAME " Pronto."
#define MSG_EXTRUDE "Estrudi" #define MSG_SD_INSERTED "SD Card inserita"
#define MSG_RETRACT "Ritrai" #define MSG_SD_REMOVED "SD Card rimossa"
#define MSG_MOVE_AXIS "Muovi Asse" #define MSG_MAIN "Menu principale"
#define MSG_SPEED "Velcità" #define MSG_AUTOSTART "Autostart"
#define MSG_NOZZLE "Ugello" #define MSG_DISABLE_STEPPERS "Disabilita Motori"
#define MSG_NOZZLE1 "Ugello2" #define MSG_AUTO_HOME "Auto Home"
#define MSG_NOZZLE2 "Ugello3" #define MSG_SET_ORIGIN "Imposta Origine"
#define MSG_BED "Piatto" #define MSG_PREHEAT_PLA "Preriscalda PLA"
#define MSG_FAN_SPEED "Ventola" #define MSG_PREHEAT_PLA_SETTINGS "Preris. PLA Conf"
#define MSG_FLOW "Flusso" #define MSG_PREHEAT_ABS "Preriscalda ABS"
#define MSG_CONTROL "Controllo" #define MSG_PREHEAT_ABS_SETTINGS "Preris. ABS Conf"
#define MSG_MIN " \002 Min:" #define MSG_COOLDOWN "Rafredda"
#define MSG_MAX " \002 Max:" #define MSG_EXTRUDE "Estrudi"
#define MSG_FACTOR " \002 Fact:" #define MSG_RETRACT "Ritrai"
#define MSG_AUTOTEMP "Autotemp" #define MSG_MOVE_AXIS "Muovi Asse"
#define MSG_ON "On " #define MSG_SPEED "Velcità"
#define MSG_OFF "Off" #define MSG_NOZZLE "Ugello"
#define MSG_PID_P "PID-P" #define MSG_NOZZLE1 "Ugello2"
#define MSG_PID_I "PID-I" #define MSG_NOZZLE2 "Ugello3"
#define MSG_PID_D "PID-D" #define MSG_BED "Piatto"
#define MSG_PID_C "PID-C" #define MSG_FAN_SPEED "Ventola"
#define MSG_ACC "Accel" #define MSG_FLOW "Flusso"
#define MSG_VXY_JERK "Vxy-jerk" #define MSG_CONTROL "Controllo"
#define MSG_VMAX "Vmax" #define MSG_MIN " \002 Min:"
#define MSG_X "x" #define MSG_MAX " \002 Max:"
#define MSG_Y "y" #define MSG_FACTOR " \002 Fact:"
#define MSG_Z "z" #define MSG_AUTOTEMP "Autotemp"
#define MSG_E "e" #define MSG_ON "On "
#define MSG_VMIN "Vmin" #define MSG_OFF "Off"
#define MSG_VTRAV_MIN "VTrav min" #define MSG_PID_P "PID-P"
#define MSG_AMAX "Amax" #define MSG_PID_I "PID-I"
#define MSG_A_RETRACT "A-retract" #define MSG_PID_D "PID-D"
#define MSG_XSTEPS "Xpassi/mm" #define MSG_PID_C "PID-C"
#define MSG_YSTEPS "Ypassi/mm" #define MSG_ACC "Accel"
#define MSG_ZSTEPS "Zpassi/mm" #define MSG_VXY_JERK "Vxy-jerk"
#define MSG_ESTEPS "Epassi/mm" #define MSG_VMAX "Vmax"
#define MSG_RECTRACT "Ritrai" #define MSG_X "x"
#define MSG_TEMPERATURE "Temperatura" #define MSG_Y "y"
#define MSG_MOTION "Movimento" #define MSG_Z "z"
#define MSG_STORE_EPROM "Salva in EEPROM" #define MSG_E "e"
#define MSG_LOAD_EPROM "Carica da EEPROM" #define MSG_VMIN "Vmin"
#define MSG_RESTORE_FAILSAFE "Impostaz. default" #define MSG_VTRAV_MIN "VTrav min"
#define MSG_REFRESH "Aggiorna" #define MSG_AMAX "Amax"
#define MSG_WATCH "Guarda" #define MSG_A_RETRACT "A-retract"
#define MSG_PREPARE "Prepara" #define MSG_XSTEPS "Xpassi/mm"
#define MSG_TUNE "Adatta" #define MSG_YSTEPS "Ypassi/mm"
#define MSG_PAUSE_PRINT "Pausa" #define MSG_ZSTEPS "Zpassi/mm"
#define MSG_RESUME_PRINT "Riprendi Stampa" #define MSG_ESTEPS "Epassi/mm"
#define MSG_STOP_PRINT "Arresta Stampa" #define MSG_RECTRACT "Ritrai"
#define MSG_CARD_MENU "SD Card Menu" #define MSG_TEMPERATURE "Temperatura"
#define MSG_NO_CARD "No SD Card" #define MSG_MOTION "Movimento"
#define MSG_DWELL "Sospensione..." #define MSG_STORE_EPROM "Salva in EEPROM"
#define MSG_USERWAIT "Attendi Utente..." #define MSG_LOAD_EPROM "Carica da EEPROM"
#define MSG_RESUMING "Riprendi Stampa" #define MSG_RESTORE_FAILSAFE "Impostaz. default"
#define MSG_NO_MOVE "Nessun Movimento." #define MSG_REFRESH "Aggiorna"
#define MSG_KILLED "UCCISO. " #define MSG_WATCH "Guarda"
#define MSG_STOPPED "ARRESTATO. " #define MSG_PREPARE "Prepara"
#define MSG_CONTROL_RETRACT "Ritrai mm" #define MSG_TUNE "Adatta"
#define MSG_CONTROL_RETRACTF "Ritrai F" #define MSG_PAUSE_PRINT "Pausa"
#define MSG_CONTROL_RETRACT_ZLIFT "Salta mm" #define MSG_RESUME_PRINT "Riprendi Stampa"
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm" #define MSG_STOP_PRINT "Arresta Stampa"
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet F" #define MSG_CARD_MENU "SD Card Menu"
#define MSG_AUTORETRACT "AutoArretramento" #define MSG_NO_CARD "No SD Card"
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Qualcosa non va in MenuStructure." #define MSG_DWELL "Sospensione..."
#define MSG_FILAMENTCHANGE "Cambia filamento" #define MSG_USERWAIT "Attendi Utente..."
#define MSG_INIT_SDCARD "Iniz. SD-Card" #define MSG_RESUMING "Riprendi Stampa"
#define MSG_CNG_SDCARD "Cambia SD-Card" #define MSG_NO_MOVE "Nessun Movimento."
#define MSG_KILLED "UCCISO. "
// Serial Console Messages #define MSG_STOPPED "ARRESTATO. "
#define MSG_CONTROL_RETRACT "Ritrai mm"
#define MSG_Enqueing "accodamento \"" #define MSG_CONTROL_RETRACTF "Ritrai F"
#define MSG_POWERUP "Accensione" #define MSG_CONTROL_RETRACT_ZLIFT "Salta mm"
#define MSG_EXTERNAL_RESET " Reset Esterno" #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
#define MSG_BROWNOUT_RESET " Brown out Reset" #define MSG_CONTROL_RETRACT_RECOVERF "UnRet F"
#define MSG_WATCHDOG_RESET " Watchdog Reset" #define MSG_AUTORETRACT "AutoArretramento"
#define MSG_SOFTWARE_RESET " Software Reset" #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Qualcosa non va in MenuStructure."
#define MSG_MARLIN "Marlin " #define MSG_FILAMENTCHANGE "Cambia filamento"
#define MSG_AUTHOR " | Autore: " #define MSG_INIT_SDCARD "Iniz. SD-Card"
#define MSG_CONFIGURATION_VER " Ultimo Aggiornamento: " #define MSG_CNG_SDCARD "Cambia SD-Card"
#define MSG_FREE_MEMORY " Memoria Libera: "
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " // Serial Console Messages
#define MSG_OK "ok"
#define MSG_FILE_SAVED "File Salvato." #define MSG_Enqueing "accodamento \""
#define MSG_ERR_LINE_NO "Il Numero della Linea non corrisponde al Numero dell'Ultima Linea+1, Ultima Linea: " #define MSG_POWERUP "Accensione"
#define MSG_ERR_CHECKSUM_MISMATCH "checksum non corrispondente, Ultima Linea: " #define MSG_EXTERNAL_RESET " Reset Esterno"
#define MSG_ERR_NO_CHECKSUM "Nessun Checksum con Numero di Linea, Ultima Linea: " #define MSG_BROWNOUT_RESET " Brown out Reset"
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Nessun Numero di Linea con Checksum, Ultima Linea: " #define MSG_WATCHDOG_RESET " Watchdog Reset"
#define MSG_FILE_PRINTED "File stampato" #define MSG_SOFTWARE_RESET " Software Reset"
#define MSG_BEGIN_FILE_LIST "Inizio Lista File" #define MSG_MARLIN "Marlin "
#define MSG_END_FILE_LIST "Fine Lista File" #define MSG_AUTHOR " | Autore: "
#define MSG_M104_INVALID_EXTRUDER "M104 Estrusore non valido " #define MSG_CONFIGURATION_VER " Ultimo Aggiornamento: "
#define MSG_M105_INVALID_EXTRUDER "M105 Estrusore non valido " #define MSG_FREE_MEMORY " Memoria Libera: "
#define MSG_ERR_NO_THERMISTORS "Nessun Termistore - nessuna temperatura" #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
#define MSG_M109_INVALID_EXTRUDER "M109 Estrusore non valido " #define MSG_OK "ok"
#define MSG_HEATING "Riscaldamento..." #define MSG_FILE_SAVED "File Salvato."
#define MSG_HEATING_COMPLETE "Stampante Calda." #define MSG_ERR_LINE_NO "Il Numero della Linea non corrisponde al Numero dell'Ultima Linea+1, Ultima Linea: "
#define MSG_BED_HEATING "Riscaldamento Piatto." #define MSG_ERR_CHECKSUM_MISMATCH "checksum non corrispondente, Ultima Linea: "
#define MSG_BED_DONE "Piatto Pronto." #define MSG_ERR_NO_CHECKSUM "Nessun Checksum con Numero di Linea, Ultima Linea: "
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Nessun Numero di Linea con Checksum, Ultima Linea: "
#define MSG_COUNT_X " Calcola X: " #define MSG_FILE_PRINTED "File stampato"
#define MSG_ERR_KILLED "Stampante Calda. kill() chiamata !!" #define MSG_BEGIN_FILE_LIST "Inizio Lista File"
#define MSG_ERR_STOPPED "Stampante fermata a causa di errori. Risolvi l'errore e usa M999 per ripartire!. (Reset temperatura. Impostala prima di ripartire)" #define MSG_END_FILE_LIST "Fine Lista File"
#define MSG_RESEND "Reinviato:" #define MSG_M104_INVALID_EXTRUDER "M104 Estrusore non valido "
#define MSG_UNKNOWN_COMMAND "Comando sconosciuto: \"" #define MSG_M105_INVALID_EXTRUDER "M105 Estrusore non valido "
#define MSG_ACTIVE_EXTRUDER "Attiva Estrusore: " #define MSG_M218_INVALID_EXTRUDER "M218 Estrusore non valido "
#define MSG_INVALID_EXTRUDER "Estrusore non valido" #define MSG_ERR_NO_THERMISTORS "Nessun Termistore - nessuna temperatura"
#define MSG_X_MIN "x_min: " #define MSG_M109_INVALID_EXTRUDER "M109 Estrusore non valido "
#define MSG_X_MAX "x_max: " #define MSG_HEATING "Riscaldamento..."
#define MSG_Y_MIN "y_min: " #define MSG_HEATING_COMPLETE "Stampante Calda."
#define MSG_Y_MAX "y_max: " #define MSG_BED_HEATING "Riscaldamento Piatto."
#define MSG_Z_MIN "z_min: " #define MSG_BED_DONE "Piatto Pronto."
#define MSG_Z_MAX "z_max: " #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
#define MSG_M119_REPORT "Segnalazione stato degli endstop" #define MSG_COUNT_X " Calcola X: "
#define MSG_ENDSTOP_HIT "INNESCATO" #define MSG_ERR_KILLED "Stampante Calda. kill() chiamata !!"
#define MSG_ENDSTOP_OPEN "aperto" #define MSG_ERR_STOPPED "Stampante fermata a causa di errori. Risolvi l'errore e usa M999 per ripartire!. (Reset temperatura. Impostala prima di ripartire)"
#define MSG_RESEND "Reinviato:"
#define MSG_SD_CANT_OPEN_SUBDIR "Impossibile aprire sottocartella" #define MSG_UNKNOWN_COMMAND "Comando sconosciuto: \""
#define MSG_SD_INIT_FAIL "Fallita Inizializzazione SD" #define MSG_ACTIVE_EXTRUDER "Attiva Estrusore: "
#define MSG_SD_VOL_INIT_FAIL "Fallito il montaggio del Volume" #define MSG_INVALID_EXTRUDER "Estrusore non valido"
#define MSG_SD_OPENROOT_FAIL "Fallita l'apertura Cartella Principale" #define MSG_X_MIN "x_min: "
#define MSG_SD_CARD_OK "SD card ok" #define MSG_X_MAX "x_max: "
#define MSG_SD_WORKDIR_FAIL "Fallita l'apertura Cartella di Lavoro" #define MSG_Y_MIN "y_min: "
#define MSG_SD_OPEN_FILE_FAIL "Fallita l'apertura del File: " #define MSG_Y_MAX "y_max: "
#define MSG_SD_FILE_OPENED "File aperto: " #define MSG_Z_MIN "z_min: "
#define MSG_SD_SIZE " Dimensione: " #define MSG_Z_MAX "z_max: "
#define MSG_SD_FILE_SELECTED "File selezionato" #define MSG_M119_REPORT "Segnalazione stato degli endstop"
#define MSG_SD_WRITE_TO_FILE "Scrittura su file: " #define MSG_ENDSTOP_HIT "INNESCATO"
#define MSG_SD_PRINTING_BYTE "Si sta scrivendo il byte su SD " #define MSG_ENDSTOP_OPEN "aperto"
#define MSG_SD_NOT_PRINTING "Non si sta scrivendo su SD" #define MSG_HOTEND_OFFSET "Hotend offsets:"
#define MSG_SD_ERR_WRITE_TO_FILE "Errore nella scrittura su file"
#define MSG_SD_CANT_ENTER_SUBDIR "Impossibile entrare nella sottocartella: " #define MSG_SD_CANT_OPEN_SUBDIR "Impossibile aprire sottocartella"
#define MSG_SD_INIT_FAIL "Fallita Inizializzazione SD"
#define MSG_STEPPER_TO_HIGH "Steprate troppo alto: " #define MSG_SD_VOL_INIT_FAIL "Fallito il montaggio del Volume"
#define MSG_ENDSTOPS_HIT "Raggiunto il fondo carrello: " #define MSG_SD_OPENROOT_FAIL "Fallita l'apertura Cartella Principale"
#define MSG_ERR_COLD_EXTRUDE_STOP " prevenuta estrusione fredda" #define MSG_SD_CARD_OK "SD card ok"
#define MSG_ERR_LONG_EXTRUDE_STOP " prevenuta estrusione troppo lunga" #define MSG_SD_WORKDIR_FAIL "Fallita l'apertura Cartella di Lavoro"
#define MSG_SD_OPEN_FILE_FAIL "Fallita l'apertura del File: "
#endif #define MSG_SD_FILE_OPENED "File aperto: "
#define MSG_SD_SIZE " Dimensione: "
#define MSG_SD_FILE_SELECTED "File selezionato"
#if LANGUAGE_CHOICE == 8 #define MSG_SD_WRITE_TO_FILE "Scrittura su file: "
#define MSG_SD_PRINTING_BYTE "Si sta scrivendo il byte su SD "
// LCD Menu Messages #define MSG_SD_NOT_PRINTING "Non si sta scrivendo su SD"
#define WELCOME_MSG MACHINE_NAME " Pronta." #define MSG_SD_ERR_WRITE_TO_FILE "Errore nella scrittura su file"
#define MSG_SD_INSERTED "Cartao SD inserido" #define MSG_SD_CANT_ENTER_SUBDIR "Impossibile entrare nella sottocartella: "
#define MSG_SD_REMOVED "Cartao SD removido"
#define MSG_MAIN " Menu Principal \003" #define MSG_STEPPER_TO_HIGH "Steprate troppo alto: "
#define MSG_AUTOSTART " Autostart" #define MSG_ENDSTOPS_HIT "Raggiunto il fondo carrello: "
#define MSG_DISABLE_STEPPERS " Apagar Motores" #define MSG_ERR_COLD_EXTRUDE_STOP " prevenuta estrusione fredda"
#define MSG_AUTO_HOME " Ir para Origen" #define MSG_ERR_LONG_EXTRUDE_STOP " prevenuta estrusione troppo lunga"
#define MSG_SET_ORIGIN " Estabelecer Origen"
#define MSG_PREHEAT_PLA " pre-aquecer PLA" #endif
#define MSG_PREHEAT_PLA_SETTINGS " pre-aquecer PLA Setting"
#define MSG_PREHEAT_ABS " pre-aquecer ABS"
#define MSG_PREHEAT_ABS_SETTINGS " pre-aquecer ABS Setting" #if LANGUAGE_CHOICE == 8
#define MSG_COOLDOWN " Esfriar"
#define MSG_EXTRUDE " Extrudar" // LCD Menu Messages
#define MSG_RETRACT " Retrair" #define WELCOME_MSG MACHINE_NAME " Pronta."
#define MSG_PREHEAT_PLA " pre-aquecer PLA" #define MSG_SD_INSERTED "Cartao SD inserido"
#define MSG_PREHEAT_ABS " pre-aquecer ABS" #define MSG_SD_REMOVED "Cartao SD removido"
#define MSG_MOVE_AXIS " Mover eixo \x7E" #define MSG_MAIN " Menu Principal \003"
#define MSG_SPEED " Velocidade:" #define MSG_AUTOSTART " Autostart"
#define MSG_NOZZLE " \002Nozzle:" #define MSG_DISABLE_STEPPERS " Apagar Motores"
#define MSG_NOZZLE1 " \002Nozzle2:" #define MSG_AUTO_HOME " Ir para Origen"
#define MSG_NOZZLE2 " \002Nozzle3:" #define MSG_SET_ORIGIN " Estabelecer Origen"
#define MSG_BED " \002Base:" #define MSG_PREHEAT_PLA " pre-aquecer PLA"
#define MSG_FAN_SPEED " Velocidade Ventoinha:" #define MSG_PREHEAT_PLA_SETTINGS " pre-aquecer PLA Setting"
#define MSG_FLOW " Fluxo:" #define MSG_PREHEAT_ABS " pre-aquecer ABS"
#define MSG_CONTROL " Controle \003" #define MSG_PREHEAT_ABS_SETTINGS " pre-aquecer ABS Setting"
#define MSG_MIN " \002 Min:" #define MSG_COOLDOWN " Esfriar"
#define MSG_MAX " \002 Max:" #define MSG_EXTRUDE " Extrudar"
#define MSG_FACTOR " \002 Fact:" #define MSG_RETRACT " Retrair"
#define MSG_AUTOTEMP " Autotemp:" #define MSG_PREHEAT_PLA " pre-aquecer PLA"
#define MSG_ON "On " #define MSG_PREHEAT_ABS " pre-aquecer ABS"
#define MSG_OFF "Off" #define MSG_MOVE_AXIS " Mover eixo \x7E"
#define MSG_PID_P " PID-P: " #define MSG_SPEED " Velocidade:"
#define MSG_PID_I " PID-I: " #define MSG_NOZZLE " \002Nozzle:"
#define MSG_PID_D " PID-D: " #define MSG_NOZZLE1 " \002Nozzle2:"
#define MSG_PID_C " PID-C: " #define MSG_NOZZLE2 " \002Nozzle3:"
#define MSG_ACC " Acc:" #define MSG_BED " \002Base:"
#define MSG_VXY_JERK " Vxy-jerk: " #define MSG_FAN_SPEED " Velocidade Ventoinha:"
#define MSG_VMAX " Vmax " #define MSG_FLOW " Fluxo:"
#define MSG_X "x:" #define MSG_CONTROL " Controle \003"
#define MSG_Y "y:" #define MSG_MIN " \002 Min:"
#define MSG_Z "z:" #define MSG_MAX " \002 Max:"
#define MSG_E "e:" #define MSG_FACTOR " \002 Fact:"
#define MSG_VMIN " Vmin:" #define MSG_AUTOTEMP " Autotemp:"
#define MSG_VTRAV_MIN " VTrav min:" #define MSG_ON "On "
#define MSG_AMAX " Amax " #define MSG_OFF "Off"
#define MSG_A_RETRACT " A-retract:" #define MSG_PID_P " PID-P: "
#define MSG_XSTEPS " Xpasso/mm:" #define MSG_PID_I " PID-I: "
#define MSG_YSTEPS " Ypasso/mm:" #define MSG_PID_D " PID-D: "
#define MSG_ZSTEPS " Zpasso/mm:" #define MSG_PID_C " PID-C: "
#define MSG_ESTEPS " Epasso/mm:" #define MSG_ACC " Acc:"
#define MSG_MAIN_WIDE " Menu Principal \003" #define MSG_VXY_JERK " Vxy-jerk: "
#define MSG_RECTRACT_WIDE " Retrair \x7E" #define MSG_VMAX " Vmax "
#define MSG_TEMPERATURE_WIDE " Temperatura \x7E" #define MSG_X "x:"
#define MSG_TEMPERATURE_RTN " Temperatura \003" #define MSG_Y "y:"
#define MSG_MOTION_WIDE " Movimento \x7E" #define MSG_Z "z:"
#define MSG_STORE_EPROM " Guardar memoria" #define MSG_E "e:"
#define MSG_LOAD_EPROM " Carregar memoria" #define MSG_VMIN " Vmin:"
#define MSG_RESTORE_FAILSAFE " Rest. de emergencia" #define MSG_VTRAV_MIN " VTrav min:"
#define MSG_REFRESH "\004Recarregar" #define MSG_AMAX " Amax "
#define MSG_WATCH " Monitorar \003" #define MSG_A_RETRACT " A-retract:"
#define MSG_PREPARE " Preparar \x7E" #define MSG_XSTEPS " Xpasso/mm:"
#define MSG_PREPARE_ALT " Preparar \003" #define MSG_YSTEPS " Ypasso/mm:"
#define MSG_CONTROL_ARROW " Controle \x7E" #define MSG_ZSTEPS " Zpasso/mm:"
#define MSG_RETRACT_ARROW " Retrair \x7E" #define MSG_ESTEPS " Epasso/mm:"
#define MSG_TUNE " Tune \x7E" #define MSG_MAIN_WIDE " Menu Principal \003"
#define MSG_PAUSE_PRINT " Pausar Impressao \x7E" #define MSG_RECTRACT_WIDE " Retrair \x7E"
#define MSG_RESUME_PRINT " Resumir Impressao \x7E" #define MSG_TEMPERATURE_WIDE " Temperatura \x7E"
#define MSG_STOP_PRINT " Parar Impressao \x7E" #define MSG_TEMPERATURE_RTN " Temperatura \003"
#define MSG_CARD_MENU " Menu cartao SD \x7E" #define MSG_MOTION_WIDE " Movimento \x7E"
#define MSG_NO_CARD " Sem cartao SD" #define MSG_STORE_EPROM " Guardar memoria"
#define MSG_DWELL "Repouso..." #define MSG_LOAD_EPROM " Carregar memoria"
#define MSG_USERWAIT "Esperando Ordem..." #define MSG_RESTORE_FAILSAFE " Rest. de emergencia"
#define MSG_NO_MOVE "Sem movimento." #define MSG_REFRESH "\004Recarregar"
#define MSG_PART_RELEASE "Lancamento Parcial" #define MSG_WATCH " Monitorar \003"
#define MSG_KILLED "PARADA DE EMERGENCIA. " #define MSG_PREPARE " Preparar \x7E"
#define MSG_STOPPED "PARADA. " #define MSG_PREPARE_ALT " Preparar \003"
#define MSG_STEPPER_RELEASED "Lancado." #define MSG_CONTROL_ARROW " Controle \x7E"
#define MSG_CONTROL_RETRACT " Retrair mm:" #define MSG_RETRACT_ARROW " Retrair \x7E"
#define MSG_CONTROL_RETRACTF " Retrair F:" #define MSG_TUNE " Tune \x7E"
#define MSG_CONTROL_RETRACT_ZLIFT " Levantar mm:" #define MSG_PAUSE_PRINT " Pausar Impressao \x7E"
#define MSG_CONTROL_RETRACT_RECOVER " DesRet +mm:" #define MSG_RESUME_PRINT " Resumir Impressao \x7E"
#define MSG_CONTROL_RETRACT_RECOVERF " DesRet F:" #define MSG_STOP_PRINT " Parar Impressao \x7E"
#define MSG_AUTORETRACT " AutoRetr.:" #define MSG_CARD_MENU " Menu cartao SD \x7E"
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Algo esta errado na estrutura do Menu." #define MSG_NO_CARD " Sem cartao SD"
#define MSG_FILAMENTCHANGE "Change filament" #define MSG_DWELL "Repouso..."
#define MSG_USERWAIT "Esperando Ordem..."
// Serial Console Messages #define MSG_NO_MOVE "Sem movimento."
#define MSG_PART_RELEASE "Lancamento Parcial"
#define MSG_Enqueing "enqueing \"" #define MSG_KILLED "PARADA DE EMERGENCIA. "
#define MSG_POWERUP "PowerUp" #define MSG_STOPPED "PARADA. "
#define MSG_EXTERNAL_RESET " Reset Externo" #define MSG_STEPPER_RELEASED "Lancado."
#define MSG_BROWNOUT_RESET " Reset por voltagem incorreta" #define MSG_CONTROL_RETRACT " Retrair mm:"
#define MSG_WATCHDOG_RESET " Reset por Bloqueio" #define MSG_CONTROL_RETRACTF " Retrair F:"
#define MSG_SOFTWARE_RESET " Reset por Software" #define MSG_CONTROL_RETRACT_ZLIFT " Levantar mm:"
#define MSG_MARLIN "Marlin " #define MSG_CONTROL_RETRACT_RECOVER " DesRet +mm:"
#define MSG_AUTHOR " | Author: " #define MSG_CONTROL_RETRACT_RECOVERF " DesRet F:"
#define MSG_CONFIGURATION_VER " Ultima atualizacao: " #define MSG_AUTORETRACT " AutoRetr.:"
#define MSG_FREE_MEMORY " memoria Livre: " #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Algo esta errado na estrutura do Menu."
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " #define MSG_FILAMENTCHANGE "Change filament"
#define MSG_OK "ok"
#define MSG_FILE_SAVED "Guardado." // Serial Console Messages
#define MSG_ERR_LINE_NO "O Numero da linha Nao e igual ao ultimo Numero da linha+1, Ultima linha:"
#define MSG_ERR_CHECKSUM_MISMATCH "O checksum Nao coincide, Ultima linha:" #define MSG_Enqueing "enqueing \""
#define MSG_ERR_NO_CHECKSUM "Nao foi possivel encontrar o checksum com o numero da linha, Ultima linha :" #define MSG_POWERUP "PowerUp"
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Nao ha o numero da linha com o checksum, Ultima linha:" #define MSG_EXTERNAL_RESET " Reset Externo"
#define MSG_FILE_PRINTED "Impressao terminada" #define MSG_BROWNOUT_RESET " Reset por voltagem incorreta"
#define MSG_BEGIN_FILE_LIST "Começo da lista de arquivos" #define MSG_WATCHDOG_RESET " Reset por Bloqueio"
#define MSG_END_FILE_LIST "Fim da lista de arquivos" #define MSG_SOFTWARE_RESET " Reset por Software"
#define MSG_M104_INVALID_EXTRUDER "M104 Extrusor inválido " #define MSG_MARLIN "Marlin "
#define MSG_M105_INVALID_EXTRUDER "M105 Extrusor inválido " #define MSG_AUTHOR " | Author: "
#define MSG_ERR_NO_THERMISTORS "Nao ha termistor - no temp" #define MSG_CONFIGURATION_VER " Ultima atualizacao: "
#define MSG_M109_INVALID_EXTRUDER "M109 Extrusor inválido " #define MSG_FREE_MEMORY " memoria Livre: "
#define MSG_HEATING "Aquecendo..." #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
#define MSG_HEATING_COMPLETE "Aquecido." #define MSG_OK "ok"
#define MSG_BED_HEATING "Aquecendo a Base." #define MSG_FILE_SAVED "Guardado."
#define MSG_BED_DONE "Base quente." #define MSG_ERR_LINE_NO "O Numero da linha Nao e igual ao ultimo Numero da linha+1, Ultima linha:"
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" #define MSG_ERR_CHECKSUM_MISMATCH "O checksum Nao coincide, Ultima linha:"
#define MSG_COUNT_X " Conta X:" #define MSG_ERR_NO_CHECKSUM "Nao foi possivel encontrar o checksum com o numero da linha, Ultima linha :"
#define MSG_ERR_KILLED "Impressora parada com kill() !!" #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Nao ha o numero da linha com o checksum, Ultima linha:"
#define MSG_ERR_STOPPED "Impressora parada por erros. Coserte o erro e use M999 para recomeçar!. (Temperatura reiniciada. Ajuste antes de recomeçar)" #define MSG_FILE_PRINTED "Impressao terminada"
#define MSG_RESEND "Reenviar:" #define MSG_BEGIN_FILE_LIST "Começo da lista de arquivos"
#define MSG_UNKNOWN_COMMAND "Comando desconhecido:\"" #define MSG_END_FILE_LIST "Fim da lista de arquivos"
#define MSG_ACTIVE_EXTRUDER "Extrusor ativo: " #define MSG_M104_INVALID_EXTRUDER "M104 Extrusor inválido "
#define MSG_INVALID_EXTRUDER "Extrusor invalido" #define MSG_M105_INVALID_EXTRUDER "M105 Extrusor inválido "
#define MSG_X_MIN "x_min: " #define MSG_M218_INVALID_EXTRUDER "M218 Extrusor inválido "
#define MSG_X_MAX "x_max: " #define MSG_ERR_NO_THERMISTORS "Nao ha termistor - no temp"
#define MSG_Y_MIN "y_min: " #define MSG_M109_INVALID_EXTRUDER "M109 Extrusor inválido "
#define MSG_Y_MAX "y_max: " #define MSG_HEATING "Aquecendo..."
#define MSG_Z_MIN "z_min: " #define MSG_HEATING_COMPLETE "Aquecido."
#define MSG_Z_MAX "z_max: " #define MSG_BED_HEATING "Aquecendo a Base."
#define MSG_M119_REPORT "Relatando estado do ponto final" #define MSG_BED_DONE "Base quente."
#define MSG_ENDSTOP_HIT "PULSADO" #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
#define MSG_ENDSTOP_OPEN "Aberto" #define MSG_COUNT_X " Conta X:"
#define MSG_ERR_KILLED "Impressora parada com kill() !!"
#define MSG_SD_CANT_OPEN_SUBDIR "Nao pode abrir sub diretorio" #define MSG_ERR_STOPPED "Impressora parada por erros. Coserte o erro e use M999 para recomeçar!. (Temperatura reiniciada. Ajuste antes de recomeçar)"
#define MSG_SD_INIT_FAIL "Falha ao iniciar SD" #define MSG_RESEND "Reenviar:"
#define MSG_SD_VOL_INIT_FAIL "Falha ao montar volume" #define MSG_UNKNOWN_COMMAND "Comando desconhecido:\""
#define MSG_SD_OPENROOT_FAIL "Falha ao abrir diretorio raiz" #define MSG_ACTIVE_EXTRUDER "Extrusor ativo: "
#define MSG_SD_CARD_OK "cartao SD ok" #define MSG_INVALID_EXTRUDER "Extrusor invalido"
#define MSG_SD_WORKDIR_FAIL "Falha ao abrir diretorio de trabalho" #define MSG_X_MIN "x_min: "
#define MSG_SD_OPEN_FILE_FAIL "Erro ao abrir, Arquivo: " #define MSG_X_MAX "x_max: "
#define MSG_SD_FILE_OPENED "Arquivo aberto:" #define MSG_Y_MIN "y_min: "
#define MSG_SD_SIZE " Size:" #define MSG_Y_MAX "y_max: "
#define MSG_SD_FILE_SELECTED "Arquivo selecionado" #define MSG_Z_MIN "z_min: "
#define MSG_SD_WRITE_TO_FILE "Escrevendo no arquivo: " #define MSG_Z_MAX "z_max: "
#define MSG_SD_PRINTING_BYTE "SD imprimindo o byte " #define MSG_M119_REPORT "Relatando estado do ponto final"
#define MSG_SD_NOT_PRINTING "Nao esta se imprimindo com o SD" #define MSG_ENDSTOP_HIT "PULSADO"
#define MSG_SD_ERR_WRITE_TO_FILE "Erro ao escrever no arquivo" #define MSG_ENDSTOP_OPEN "Aberto"
#define MSG_SD_CANT_ENTER_SUBDIR "Nao pode abrir o sub diretorio:" #define MSG_HOTEND_OFFSET "Hotend offsets:"
#define MSG_STEPPER_TO_HIGH "Steprate muito alto : " #define MSG_SD_CANT_OPEN_SUBDIR "Nao pode abrir sub diretorio"
#define MSG_ENDSTOPS_HIT "O ponto final foi tocado: " #define MSG_SD_INIT_FAIL "Falha ao iniciar SD"
#define MSG_ERR_COLD_EXTRUDE_STOP " Extrusao a frio evitada" #define MSG_SD_VOL_INIT_FAIL "Falha ao montar volume"
#define MSG_ERR_LONG_EXTRUDE_STOP " Extrusao muito larga evitada" #define MSG_SD_OPENROOT_FAIL "Falha ao abrir diretorio raiz"
#define MSG_SD_CARD_OK "cartao SD ok"
#define MSG_SD_WORKDIR_FAIL "Falha ao abrir diretorio de trabalho"
#endif #define MSG_SD_OPEN_FILE_FAIL "Erro ao abrir, Arquivo: "
#define MSG_SD_FILE_OPENED "Arquivo aberto:"
#define MSG_SD_SIZE " Size:"
#define MSG_SD_FILE_SELECTED "Arquivo selecionado"
#if LANGUAGE_CHOICE == 9 #define MSG_SD_WRITE_TO_FILE "Escrevendo no arquivo: "
#define MSG_SD_PRINTING_BYTE "SD imprimindo o byte "
// Finnish #define MSG_SD_NOT_PRINTING "Nao esta se imprimindo com o SD"
#define MSG_SD_ERR_WRITE_TO_FILE "Erro ao escrever no arquivo"
// LCD Menu Messages #define MSG_SD_CANT_ENTER_SUBDIR "Nao pode abrir o sub diretorio:"
#define WELCOME_MSG MACHINE_NAME " valmis"
#define MSG_SD_INSERTED "Kortti asetettu" #define MSG_STEPPER_TO_HIGH "Steprate muito alto : "
#define MSG_SD_REMOVED "Kortti poistettu" #define MSG_ENDSTOPS_HIT "O ponto final foi tocado: "
#define MSG_MAIN "Palaa" #define MSG_ERR_COLD_EXTRUDE_STOP " Extrusao a frio evitada"
#define MSG_AUTOSTART "Automaatti" #define MSG_ERR_LONG_EXTRUDE_STOP " Extrusao muito larga evitada"
#define MSG_DISABLE_STEPPERS "Vapauta moottorit"
#define MSG_AUTO_HOME "Aja referenssiin"
#define MSG_SET_ORIGIN "Aseta origo" #endif
#define MSG_PREHEAT_PLA "Esilammita PLA"
#define MSG_PREHEAT_PLA_SETTINGS "Esilammita PLA konf"
#define MSG_PREHEAT_ABS "Esilammita ABS"
#define MSG_PREHEAT_ABS_SETTINGS "Esilammita ABS konf" #if LANGUAGE_CHOICE == 9
#define MSG_COOLDOWN "Jaahdyta"
#define MSG_EXTRUDE "Pursota" // Finnish
#define MSG_RETRACT "Veda takaisin"
#define MSG_MOVE_AXIS "Liikuta akseleita" // LCD Menu Messages
#define MSG_SPEED "Nopeus" #define WELCOME_MSG MACHINE_NAME " valmis"
#define MSG_NOZZLE "Suutin" #define MSG_SD_INSERTED "Kortti asetettu"
#define MSG_NOZZLE1 "Suutin2" #define MSG_SD_REMOVED "Kortti poistettu"
#define MSG_NOZZLE2 "Suutin3" #define MSG_MAIN "Palaa"
#define MSG_BED "Alusta" #define MSG_AUTOSTART "Automaatti"
#define MSG_FAN_SPEED "Tuul. nopeus" #define MSG_DISABLE_STEPPERS "Vapauta moottorit"
#define MSG_FLOW "Virtaus" #define MSG_AUTO_HOME "Aja referenssiin"
#define MSG_CONTROL "Kontrolli" #define MSG_SET_ORIGIN "Aseta origo"
#define MSG_MIN " \002 Min" #define MSG_PREHEAT_PLA "Esilammita PLA"
#define MSG_MAX " \002 Max" #define MSG_PREHEAT_PLA_SETTINGS "Esilammita PLA konf"
#define MSG_FACTOR " \002 Kerr" #define MSG_PREHEAT_ABS "Esilammita ABS"
#define MSG_AUTOTEMP "Autotemp" #define MSG_PREHEAT_ABS_SETTINGS "Esilammita ABS konf"
#define MSG_ON "On " #define MSG_COOLDOWN "Jaahdyta"
#define MSG_OFF "Off" #define MSG_EXTRUDE "Pursota"
#define MSG_PID_P "PID-P" #define MSG_RETRACT "Veda takaisin"
#define MSG_PID_I "PID-I" #define MSG_MOVE_AXIS "Liikuta akseleita"
#define MSG_PID_D "PID-D" #define MSG_SPEED "Nopeus"
#define MSG_PID_C "PID-C" #define MSG_NOZZLE "Suutin"
#define MSG_ACC "Kiihtyv" #define MSG_NOZZLE1 "Suutin2"
#define MSG_VXY_JERK "Vxy-jerk" #define MSG_NOZZLE2 "Suutin3"
#define MSG_VMAX "Vmax " #define MSG_BED "Alusta"
#define MSG_X "x" #define MSG_FAN_SPEED "Tuul. nopeus"
#define MSG_Y "y" #define MSG_FLOW "Virtaus"
#define MSG_Z "z" #define MSG_CONTROL "Kontrolli"
#define MSG_E "e" #define MSG_MIN " \002 Min"
#define MSG_VMIN "Vmin" #define MSG_MAX " \002 Max"
#define MSG_VTRAV_MIN "VLiike min" #define MSG_FACTOR " \002 Kerr"
#define MSG_AMAX "Amax " #define MSG_AUTOTEMP "Autotemp"
#define MSG_A_RETRACT "A-peruuta" #define MSG_ON "On "
#define MSG_XSTEPS "Xsteps/mm" #define MSG_OFF "Off"
#define MSG_YSTEPS "Ysteps/mm" #define MSG_PID_P "PID-P"
#define MSG_ZSTEPS "Zsteps/mm" #define MSG_PID_I "PID-I"
#define MSG_ESTEPS "Esteps/mm" #define MSG_PID_D "PID-D"
#define MSG_RECTRACT "Veda takaisin" #define MSG_PID_C "PID-C"
#define MSG_TEMPERATURE "Lampotila" #define MSG_ACC "Kiihtyv"
#define MSG_MOTION "Liike" #define MSG_VXY_JERK "Vxy-jerk"
#define MSG_STORE_EPROM "Tallenna muistiin" #define MSG_VMAX "Vmax "
#define MSG_LOAD_EPROM "Lataa muistista" #define MSG_X "x"
#define MSG_RESTORE_FAILSAFE "Palauta oletus" #define MSG_Y "y"
#define MSG_REFRESH "Paivita" #define MSG_Z "z"
#define MSG_WATCH "Seuraa" #define MSG_E "e"
#define MSG_PREPARE "Valmistele" #define MSG_VMIN "Vmin"
#define MSG_TUNE "Saada" #define MSG_VTRAV_MIN "VLiike min"
#define MSG_PAUSE_PRINT "Keskeyta tulostus" #define MSG_AMAX "Amax "
#define MSG_RESUME_PRINT "Jatka tulostusta" #define MSG_A_RETRACT "A-peruuta"
#define MSG_STOP_PRINT "Pysayta tulostus" #define MSG_XSTEPS "Xsteps/mm"
#define MSG_CARD_MENU "Korttivalikko" #define MSG_YSTEPS "Ysteps/mm"
#define MSG_NO_CARD "Ei korttia" #define MSG_ZSTEPS "Zsteps/mm"
#define MSG_DWELL "Nukkumassa..." #define MSG_ESTEPS "Esteps/mm"
#define MSG_USERWAIT "Odotetaan valintaa..." #define MSG_RECTRACT "Veda takaisin"
#define MSG_RESUMING "Jatketaan tulostusta" #define MSG_TEMPERATURE "Lampotila"
#define MSG_NO_MOVE "Ei liiketta." #define MSG_MOTION "Liike"
#define MSG_KILLED "KILLED. " #define MSG_STORE_EPROM "Tallenna muistiin"
#define MSG_STOPPED "STOPPED. " #define MSG_LOAD_EPROM "Lataa muistista"
#define MSG_CONTROL_RETRACT "Veda mm" #define MSG_RESTORE_FAILSAFE "Palauta oletus"
#define MSG_CONTROL_RETRACTF "Veda F" #define MSG_REFRESH "Paivita"
#define MSG_CONTROL_RETRACT_ZLIFT "Z mm" #define MSG_WATCH "Seuraa"
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm" #define MSG_PREPARE "Valmistele"
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet F" #define MSG_TUNE "Saada"
#define MSG_AUTORETRACT "AutoVeto." #define MSG_PAUSE_PRINT "Keskeyta tulostus"
#define MSG_FILAMENTCHANGE "Change filament" #define MSG_RESUME_PRINT "Jatka tulostusta"
#define MSG_STOP_PRINT "Pysayta tulostus"
// Serial Console Messages #define MSG_CARD_MENU "Korttivalikko"
#define MSG_NO_CARD "Ei korttia"
#define MSG_Enqueing "jonoon \"" #define MSG_DWELL "Nukkumassa..."
#define MSG_POWERUP "Kaynnistys" #define MSG_USERWAIT "Odotetaan valintaa..."
#define MSG_EXTERNAL_RESET " Ulkoinen Reset" #define MSG_RESUMING "Jatketaan tulostusta"
#define MSG_BROWNOUT_RESET " Alajannite Reset" #define MSG_NO_MOVE "Ei liiketta."
#define MSG_WATCHDOG_RESET " Vahtikoira Reset" #define MSG_KILLED "KILLED. "
#define MSG_SOFTWARE_RESET " Ohjelmisto Reset" #define MSG_STOPPED "STOPPED. "
#define MSG_MARLIN "Marlin " #define MSG_CONTROL_RETRACT "Veda mm"
#define MSG_AUTHOR " | Author: " #define MSG_CONTROL_RETRACTF "Veda F"
#define MSG_CONFIGURATION_VER " Paivitetty viimeksi: " #define MSG_CONTROL_RETRACT_ZLIFT "Z mm"
#define MSG_FREE_MEMORY " Vapaata muistia: " #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " #define MSG_CONTROL_RETRACT_RECOVERF "UnRet F"
#define MSG_OK "ok" #define MSG_AUTORETRACT "AutoVeto."
#define MSG_FILE_SAVED "Tiedosto tallennettu." #define MSG_FILAMENTCHANGE "Change filament"
#define MSG_ERR_LINE_NO "Rivinumero ei ole Viimeisin rivi+1, Viimeisin rivi: "
#define MSG_ERR_CHECKSUM_MISMATCH "Tarkistesummassa virhe, Viimeisin rivi: " // Serial Console Messages
#define MSG_ERR_NO_CHECKSUM "Rivilla ei tarkistesummaa, Viimeisin rivi: "
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Ei rivinumeroa tarkistesumman kanssa, Viimeisin rivi: " #define MSG_Enqueing "jonoon \""
#define MSG_FILE_PRINTED "Tiedoston tulostus valmis" #define MSG_POWERUP "Kaynnistys"
#define MSG_BEGIN_FILE_LIST "Tiedostolistauksen alku" #define MSG_EXTERNAL_RESET " Ulkoinen Reset"
#define MSG_END_FILE_LIST "Tiedostolistauksen loppu" #define MSG_BROWNOUT_RESET " Alajannite Reset"
#define MSG_M104_INVALID_EXTRUDER "M104 Virheellinen suutin " #define MSG_WATCHDOG_RESET " Vahtikoira Reset"
#define MSG_M105_INVALID_EXTRUDER "M105 Virheellinen suutin " #define MSG_SOFTWARE_RESET " Ohjelmisto Reset"
#define MSG_ERR_NO_THERMISTORS "Ei termistoreja - ei lampotiloja" #define MSG_MARLIN "Marlin "
#define MSG_M109_INVALID_EXTRUDER "M109 Virheellinen suutin " #define MSG_AUTHOR " | Author: "
#define MSG_HEATING "Lammitan..." #define MSG_CONFIGURATION_VER " Paivitetty viimeksi: "
#define MSG_HEATING_COMPLETE "Lammitys valmis." #define MSG_FREE_MEMORY " Vapaata muistia: "
#define MSG_BED_HEATING "Alusta lampiaa." #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
#define MSG_BED_DONE "Alusta valmis." #define MSG_OK "ok"
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" #define MSG_FILE_SAVED "Tiedosto tallennettu."
#define MSG_COUNT_X " Laskuri X: " #define MSG_ERR_LINE_NO "Rivinumero ei ole Viimeisin rivi+1, Viimeisin rivi: "
#define MSG_ERR_KILLED "Tulostin pysaytetty. kill():ia kutsuttu!" #define MSG_ERR_CHECKSUM_MISMATCH "Tarkistesummassa virhe, Viimeisin rivi: "
#define MSG_ERR_STOPPED "Tulostin pysaytetty virheiden vuoksi. Korjaa virheet ja kayta M999 kaynnistaaksesi uudelleen. (Lampotila nollattiin. Aseta lampotila sen jalkeen kun jatkat.)" #define MSG_ERR_NO_CHECKSUM "Rivilla ei tarkistesummaa, Viimeisin rivi: "
#define MSG_RESEND "Uudelleenlahetys: " #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Ei rivinumeroa tarkistesumman kanssa, Viimeisin rivi: "
#define MSG_UNKNOWN_COMMAND "Tuntematon komento: \"" #define MSG_FILE_PRINTED "Tiedoston tulostus valmis"
#define MSG_ACTIVE_EXTRUDER "Aktiivinen suutin: " #define MSG_BEGIN_FILE_LIST "Tiedostolistauksen alku"
#define MSG_INVALID_EXTRUDER "Virheellinen suutin" #define MSG_END_FILE_LIST "Tiedostolistauksen loppu"
#define MSG_X_MIN "x_min: " #define MSG_M104_INVALID_EXTRUDER "M104 Virheellinen suutin "
#define MSG_X_MAX "x_max: " #define MSG_M105_INVALID_EXTRUDER "M105 Virheellinen suutin "
#define MSG_Y_MIN "y_min: " #define MSG_M218_INVALID_EXTRUDER "M218 Virheellinen suutin "
#define MSG_Y_MAX "y_max: " #define MSG_ERR_NO_THERMISTORS "Ei termistoreja - ei lampotiloja"
#define MSG_Z_MIN "z_min: " #define MSG_M109_INVALID_EXTRUDER "M109 Virheellinen suutin "
#define MSG_Z_MAX "z_max: " #define MSG_HEATING "Lammitan..."
#define MSG_M119_REPORT "Rajakytkimien tilaraportti" #define MSG_HEATING_COMPLETE "Lammitys valmis."
#define MSG_ENDSTOP_HIT "AKTIIVISENA" #define MSG_BED_HEATING "Alusta lampiaa."
#define MSG_ENDSTOP_OPEN "avoinna" #define MSG_BED_DONE "Alusta valmis."
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
#define MSG_SD_CANT_OPEN_SUBDIR "Alihakemistoa ei voitu avata" #define MSG_COUNT_X " Laskuri X: "
#define MSG_SD_INIT_FAIL "SD alustus epaonnistui" #define MSG_ERR_KILLED "Tulostin pysaytetty. kill():ia kutsuttu!"
#define MSG_SD_VOL_INIT_FAIL "volume.init epaonnistui" #define MSG_ERR_STOPPED "Tulostin pysaytetty virheiden vuoksi. Korjaa virheet ja kayta M999 kaynnistaaksesi uudelleen. (Lampotila nollattiin. Aseta lampotila sen jalkeen kun jatkat.)"
#define MSG_SD_OPENROOT_FAIL "openRoot epaonnistui" #define MSG_RESEND "Uudelleenlahetys: "
#define MSG_SD_CARD_OK "SD kortti ok" #define MSG_UNKNOWN_COMMAND "Tuntematon komento: \""
#define MSG_SD_WORKDIR_FAIL "workDir open epaonnistui" #define MSG_ACTIVE_EXTRUDER "Aktiivinen suutin: "
#define MSG_SD_OPEN_FILE_FAIL "avaus epaonnistui, Tiedosto: " #define MSG_INVALID_EXTRUDER "Virheellinen suutin"
#define MSG_SD_FILE_OPENED "Tiedosto avattu: " #define MSG_X_MIN "x_min: "
#define MSG_SD_SIZE " Koko: " #define MSG_X_MAX "x_max: "
#define MSG_SD_FILE_SELECTED "Tiedosto valittu" #define MSG_Y_MIN "y_min: "
#define MSG_SD_WRITE_TO_FILE "Kirjoitetaan tiedostoon: " #define MSG_Y_MAX "y_max: "
#define MSG_SD_PRINTING_BYTE "SD tulostus byte " #define MSG_Z_MIN "z_min: "
#define MSG_SD_NOT_PRINTING "Ei SD tulostus" #define MSG_Z_MAX "z_max: "
#define MSG_SD_ERR_WRITE_TO_FILE "virhe kirjoitettaessa tiedostoon" #define MSG_M119_REPORT "Rajakytkimien tilaraportti"
#define MSG_SD_CANT_ENTER_SUBDIR "Alihakemistoon ei voitu siirtya: " #define MSG_ENDSTOP_HIT "AKTIIVISENA"
#define MSG_ENDSTOP_OPEN "avoinna"
#define MSG_STEPPER_TO_HIGH "Askellustaajuus liian suuri: " #define MSG_HOTEND_OFFSET "Hotend offsets:"
#define MSG_ENDSTOPS_HIT "paatyrajat aktivoitu: "
#define MSG_ERR_COLD_EXTRUDE_STOP " kylmana pursotus estetty" #define MSG_SD_CANT_OPEN_SUBDIR "Alihakemistoa ei voitu avata"
#define MSG_ERR_LONG_EXTRUDE_STOP " liian pitka pursotus estetty" #define MSG_SD_INIT_FAIL "SD alustus epaonnistui"
#define MSG_SD_VOL_INIT_FAIL "volume.init epaonnistui"
#endif #define MSG_SD_OPENROOT_FAIL "openRoot epaonnistui"
#endif // ifndef LANGUAGE_H #define MSG_SD_CARD_OK "SD kortti ok"
#define MSG_SD_WORKDIR_FAIL "workDir open epaonnistui"
#define MSG_SD_OPEN_FILE_FAIL "avaus epaonnistui, Tiedosto: "
#define MSG_SD_FILE_OPENED "Tiedosto avattu: "
#define MSG_SD_SIZE " Koko: "
#define MSG_SD_FILE_SELECTED "Tiedosto valittu"
#define MSG_SD_WRITE_TO_FILE "Kirjoitetaan tiedostoon: "
#define MSG_SD_PRINTING_BYTE "SD tulostus byte "
#define MSG_SD_NOT_PRINTING "Ei SD tulostus"
#define MSG_SD_ERR_WRITE_TO_FILE "virhe kirjoitettaessa tiedostoon"
#define MSG_SD_CANT_ENTER_SUBDIR "Alihakemistoon ei voitu siirtya: "
#define MSG_STEPPER_TO_HIGH "Askellustaajuus liian suuri: "
#define MSG_ENDSTOPS_HIT "paatyrajat aktivoitu: "
#define MSG_ERR_COLD_EXTRUDE_STOP " kylmana pursotus estetty"
#define MSG_ERR_LONG_EXTRUDE_STOP " liian pitka pursotus estetty"
#endif
#endif // ifndef LANGUAGE_H

View file

@ -248,7 +248,7 @@ const short temptable_6[][2] PROGMEM = {
{970*OVERSAMPLENR, 25}, {970*OVERSAMPLENR, 25},
{978*OVERSAMPLENR, 22}, {978*OVERSAMPLENR, 22},
{1008*OVERSAMPLENR, 3}, {1008*OVERSAMPLENR, 3},
{1023*OVERSAMPLENR, 0} //to allow internal 0C {1023*OVERSAMPLENR, 0} //to allow internal 0 degrees C
}; };
#endif #endif
@ -309,7 +309,7 @@ const short temptable_7[][2] PROGMEM = {
{994*OVERSAMPLENR, 15}, {994*OVERSAMPLENR, 15},
{1001*OVERSAMPLENR, 10}, {1001*OVERSAMPLENR, 10},
{1005*OVERSAMPLENR, 5}, {1005*OVERSAMPLENR, 5},
{1023*OVERSAMPLENR, 0} //to allow internal 0C {1023*OVERSAMPLENR, 0} //to allow internal 0 degrees C
}; };
#endif #endif
#if (THERMISTORHEATER_0 == 8) || (THERMISTORHEATER_1 == 8) || (THERMISTORHEATER_2 == 8) || (THERMISTORBED == 8) #if (THERMISTORHEATER_0 == 8) || (THERMISTORHEATER_1 == 8) || (THERMISTORHEATER_2 == 8) || (THERMISTORBED == 8)