From 3f0b38ed5df318cfd28ac7433c21f2c4ceab5ddc Mon Sep 17 00:00:00 2001 From: Roxy-3D Date: Fri, 25 Aug 2017 17:03:07 -0500 Subject: [PATCH] Add Max7219 LED Matrix Debug Support (#7563) * Add Max7219 LED Matrix Debug Support The Max7219 8x8 LED Matrix's are very helpful for debugging new code. And for that matter, just trying to maximize printer settings without causing stuttering. The displays are very inexpensive (under $2.00 with shipping) and provide a lot of help when trying to debug complicated code. * Try to keep Makefile up to date. --- Marlin/Makefile | 2 +- Marlin/Marlin_main.cpp | 18 +- Marlin/Max7219_Debug_LEDs.cpp | 286 ++++++++++++++++++ Marlin/Max7219_Debug_LEDs.h | 85 ++++++ .../AlephObjects/TAZ4/Configuration_adv.h | 26 ++ .../Anet/A6/Configuration_adv.h | 26 ++ .../Anet/A8/Configuration_adv.h | 26 ++ .../BQ/Hephestos/Configuration_adv.h | 26 ++ .../BQ/Hephestos_2/Configuration_adv.h | 26 ++ .../BQ/WITBOX/Configuration_adv.h | 26 ++ .../Cartesio/Configuration_adv.h | 26 ++ .../Felix/Configuration_adv.h | 26 ++ .../Folger Tech/i3-2020/Configuration_adv.h | 26 ++ .../Infitary/i3-M508/Configuration_adv.h | 26 ++ .../Malyan/M150/Configuration_adv.h | 26 ++ .../RigidBot/Configuration_adv.h | 26 ++ .../SCARA/Configuration_adv.h | 26 ++ .../Sanguinololu/Configuration_adv.h | 26 ++ .../TinyBoy2/Configuration_adv.h | 26 ++ .../Velleman/K8200/Configuration_adv.h | 26 ++ .../Velleman/K8400/Configuration_adv.h | 26 ++ .../FLSUN/auto_calibrate/Configuration_adv.h | 26 ++ .../FLSUN/kossel_mini/Configuration_adv.h | 26 ++ .../delta/generic/Configuration_adv.h | 26 ++ .../delta/kossel_mini/Configuration_adv.h | 26 ++ .../delta/kossel_pro/Configuration_adv.h | 26 ++ .../delta/kossel_xl/Configuration_adv.h | 26 ++ .../gCreate/gMax1.5+/Configuration.h | 2 +- .../gCreate/gMax1.5+/Configuration_adv.h | 26 ++ .../makibox/Configuration_adv.h | 26 ++ .../tvrrug/Round2/Configuration_adv.h | 26 ++ .../wt150/Configuration_adv.h | 26 ++ 32 files changed, 1090 insertions(+), 5 deletions(-) create mode 100644 Marlin/Max7219_Debug_LEDs.cpp create mode 100644 Marlin/Max7219_Debug_LEDs.h diff --git a/Marlin/Makefile b/Marlin/Makefile index 98d035d95..150f07439 100644 --- a/Marlin/Makefile +++ b/Marlin/Makefile @@ -310,7 +310,7 @@ CXXSRC = WMath.cpp WString.cpp Print.cpp Marlin_main.cpp \ temperature.cpp cardreader.cpp configuration_store.cpp \ watchdog.cpp SPI.cpp servo.cpp Tone.cpp ultralcd.cpp digipot_mcp4451.cpp \ dac_mcp4728.cpp vector_3.cpp least_squares_fit.cpp endstops.cpp stopwatch.cpp utility.cpp \ - printcounter.cpp nozzle.cpp serial.cpp gcode.cpp + printcounter.cpp nozzle.cpp serial.cpp gcode.cpp Max7219_Debug_LEDs.cpp ifeq ($(NEOPIXEL), 1) CXXSRC += Adafruit_NeoPixel.cpp endif diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index 5196bca81..113432403 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -279,6 +279,10 @@ #include "watchdog.h" #endif +#if ENABLED(MAX7219_DEBUG) + #include "Max7219_Debug_LEDs.h" +#endif + #if ENABLED(NEOPIXEL_RGBW_LED) #include #endif @@ -10292,7 +10296,7 @@ inline void invalid_extruder_error(const uint8_t e) { SET_OUTPUT(FANMUX1_PIN); #if PIN_EXISTS(FANMUX2) SET_OUTPUT(FANMUX2_PIN); - #endif + #endif #endif fanmux_switch(0); } @@ -13201,6 +13205,10 @@ void idle( bool no_stepper_sleep/*=false*/ #endif ) { + #if ENABLED(MAX7219_DEBUG) + Max7219_idle_tasks(); + #endif // MAX7219_DEBUG + lcd_update(); host_keepalive(); @@ -13316,6 +13324,10 @@ void stop() { */ void setup() { + #if ENABLED(MAX7219_DEBUG) + Max7219_init(); + #endif + #ifdef DISABLE_JTAG // Disable JTAG on AT90USB chips to free up pins for IO MCUCR = 0x80; @@ -13467,11 +13479,11 @@ void setup() { SET_OUTPUT(E_MUX1_PIN); SET_OUTPUT(E_MUX2_PIN); #endif - + #if HAS_FANMUX fanmux_init(); #endif - + lcd_init(); #ifndef CUSTOM_BOOTSCREEN_TIMEOUT diff --git a/Marlin/Max7219_Debug_LEDs.cpp b/Marlin/Max7219_Debug_LEDs.cpp new file mode 100644 index 000000000..a5aa3e50d --- /dev/null +++ b/Marlin/Max7219_Debug_LEDs.cpp @@ -0,0 +1,286 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * This module is normally not enabled. It can be enabled to facilitate + * the display of extra debug information during code development. + * It assumes the existance of a Max7219 LED Matrix. A suitable + * device can be obtained on eBay similar to this: http://www.ebay.com/itm/191781645249 + * for under $2.00 including shipping. + * + * Just connect up +5v and Gnd to give it power. And then 3 wires declared in the + * #define's below. Actual pin assignments can be changed in MAX7219_DEBUG section + * of configuration_adv.h + * + * #define Max7219_clock 77 + * #define Max7219_data_in 78 + * #define Max7219_load 79 + * + * First call Max7219_init() and then there are a number of support functions available + * to control the LED's in the 8x8 grid. + * + * void Max7219_init(); + * void Max7219_PutByte(uint8_t data); + * void Max7219(uint8_t reg, uint8_t data); + * void Max7219_LED_On( int8_t row, int8_t col); + * void Max7219_LED_Off( int8_t row, int8_t col); + * void Max7219_LED_Toggle( int8_t row, int8_t col); + * void Max7219_Clear_Row( int8_t row); + * void Max7219_Clear_Column( int8_t col); + */ + + +#include "Marlin.h" + +#if ENABLED(MAX7219_DEBUG) + #include "planner.h" + #include "stepper.h" + #include "Max7219_Debug_LEDs.h" + + static uint8_t LEDs[8] = {0}; + + void Max7219_PutByte(uint8_t data) { + uint8_t i = 8; + while(i > 0) { + digitalWrite( Max7219_clock, LOW); // tick + if (data & 0x80) // check bit + digitalWrite(Max7219_data_in,HIGH); // send 1 + else + digitalWrite(Max7219_data_in,LOW); // send 0 + digitalWrite(Max7219_clock, HIGH); // tock + data = data << 0x01; + --i; // move to lesser bit + } + } + + void Max7219( uint8_t reg, uint8_t data) { + digitalWrite(Max7219_load, LOW); // begin + Max7219_PutByte(reg); // specify register + Max7219_PutByte(data); // put data + digitalWrite(Max7219_load, LOW); // and tell the chip to load the data + digitalWrite(Max7219_load,HIGH); + } + + void Max7219_LED_On( int8_t row, int8_t col) { + int x_index; + if ( row>=8 || row<0 || col>=8 || col<0) + return; + if ( LEDs[row] & (0x01<=8 || row<0 || col>=8 || col<0) + return; + if ( !(LEDs[row] & (0x01<=8 || row<0 || col>=8 || col<0) + return; + if ( (LEDs[row] & (0x01<=8 || col<0 ) + return; + LEDs[col] = 0; + x_index = 7-col; + Max7219( x_index+1, LEDs[col] ); + } + + void Max7219_Clear_Row( int8_t row) { + int c; + if ( row>=8 || row<0 ) + return; + + for(c=0; c<8; c++) + Max7219_LED_Off( c, row); + } + + void Max7219_Set_Row( int8_t row, uint8_t val) { + int b; + + if ( row<0 || row>7 ) + return; + + if ( val<0 || val>255 ) + return; + + for(b=0; b<8; b++) + if ( val & (0x01 << b) ) + Max7219_LED_On( 7-b, row); + else + Max7219_LED_Off( 7-b, row); + } + + void Max7219_Set_Column( int8_t col, uint8_t val) { + int x_index; + + if ( col>=8 || col<0 ) + return; + + if ( val<0 || val>255 ) + return; + + LEDs[col] = val; + x_index = 7-col; + Max7219( x_index+1, LEDs[col] ); + } + + + void Max7219_init() { + int i, x, y; + + pinMode(Max7219_data_in, OUTPUT); + pinMode(Max7219_clock, OUTPUT); + pinMode(Max7219_load, OUTPUT); + + digitalWrite(Max7219_load, HIGH); + + //initiation of the max 7219 + Max7219(max7219_reg_scanLimit, 0x07); + Max7219(max7219_reg_decodeMode, 0x00); // using an led matrix (not digits) + Max7219(max7219_reg_shutdown, 0x01); // not in shutdown mode + Max7219(max7219_reg_displayTest, 0x00); // no display test + Max7219(max7219_reg_intensity, 0x01 & 0x0f); // the first 0x0f is the value you can set + // range: 0x00 to 0x0f + for (i=0; i<8; i++) { // empty registers, turn all LEDs off + LEDs[i] = 0x00; + Max7219(i+1,0); + } + + for(x=0; x<8; x++) { // Do an austetically pleasing pattern to fully test + for(y=0; y<8; y++) { // the Max7219 module and LED's. First, turn them + Max7219_LED_On( x, y); // all on. + delay(3); + } + } + for(x=0; x<8; x++) { // Now, turn them all off. + for(y=0; y<8; y++) { + Max7219_LED_Off( x, y); + delay(3); // delay() is OK here. Max7219_init() is only called from + } // setup() and nothing is running yet. + } + + delay(150); + + for(x=7; x>=0; x--) { // Now, do the same thing from the opposite direction + for(y=0; y<8; y++) { + Max7219_LED_On( x, y); + delay(2); + } + } + + for(x=7; x>=0; x--) { + for(y=0; y<8; y++) { + Max7219_LED_Off( x, y); + delay(2); + } + } + } + +/* + * These are sample debug features to demonstrate the usage of the 8x8 LED Matrix for debug purposes. + * There is very little CPU burden added to the system by displaying information within the idle() + * task. + * + * But with that said, if your debugging can be facilitated by making calls into the library from + * other places in the code, feel free to do it. The CPU burden for a few calls to toggle an LED + * or clear a row is not very significant. + */ + void Max7219_idle_tasks() { + #ifdef MAX7219_DEBUG_PRINTER_ALIVE + static int debug_cnt=0; + if (debug_cnt++ > 100) { + Max7219_LED_Toggle(7,7); + debug_cnt = 0; + } + #endif + + #ifdef MAX7219_DEBUG_STEPPER_HEAD + Max7219_Clear_Row(MAX7219_DEBUG_STEPPER_HEAD); + Max7219_Clear_Row(MAX7219_DEBUG_STEPPER_HEAD+1); + if ( planner.block_buffer_head < 8) + Max7219_LED_On( planner.block_buffer_head, MAX7219_DEBUG_STEPPER_HEAD); + else + Max7219_LED_On( planner.block_buffer_head-8, MAX7219_DEBUG_STEPPER_HEAD+1); + #endif + + #ifdef MAX7219_DEBUG_STEPPER_TAIL + Max7219_Clear_Row(MAX7219_DEBUG_STEPPER_TAIL); + Max7219_Clear_Row(MAX7219_DEBUG_STEPPER_TAIL+1); + if ( planner.block_buffer_tail < 8) + Max7219_LED_On( planner.block_buffer_tail, MAX7219_DEBUG_STEPPER_TAIL ); + else + Max7219_LED_On( planner.block_buffer_tail-8, MAX7219_DEBUG_STEPPER_TAIL+1 ); + #endif + + #ifdef MAX7219_DEBUG_STEPPER_QUEUE + static int16_t last_depth=0, current_depth; + uint8_t i; + current_depth = planner.block_buffer_head - planner.block_buffer_tail; + if (current_depth != last_depth) { // usually, no update will be needed. + + if ( current_depth < 0 ) + current_depth += BLOCK_BUFFER_SIZE; + + if ( current_depth >= BLOCK_BUFFER_SIZE ) + current_depth = BLOCK_BUFFER_SIZE; + + if ( current_depth > 16 ) // if the BLOCK_BUFFER_SIZE is greater than 16 two lines + current_depth = 16; // of LED's is enough to see if the buffer is draining + + if ( current_depth < last_depth ) + for(i=current_depth; i<=last_depth; i++) { // clear the highest order LED's + if ( i & 1) + Max7219_LED_Off(i>>1, MAX7219_DEBUG_STEPPER_QUEUE+1); + else + Max7219_LED_Off(i>>1, MAX7219_DEBUG_STEPPER_QUEUE+0); + } + else + for(i=last_depth; i<=current_depth; i++) { // light up the highest order LED's + if ( i & 1) + Max7219_LED_On(i>>1, MAX7219_DEBUG_STEPPER_QUEUE+1); + else + Max7219_LED_On(i>>1, MAX7219_DEBUG_STEPPER_QUEUE+0); + } + last_depth = current_depth; + } + #endif + } +#endif //MAX7219_DEBUG + diff --git a/Marlin/Max7219_Debug_LEDs.h b/Marlin/Max7219_Debug_LEDs.h new file mode 100644 index 000000000..d2a502953 --- /dev/null +++ b/Marlin/Max7219_Debug_LEDs.h @@ -0,0 +1,85 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * This module is normally not enabled and does not generate any code. But it + * can be enabled to facilitate the display of extra debug information during + * code development. It assumes the existance of a Max7219 LED Matrix. You + * can get one on eBay similar to this: http://www.ebay.com/itm/191781645249 + * for under $2.00 including shipping. + * + * Just connect up +5v and Gnd to give it power. And then 3 wires declared in the + * #define's below. Actual pin assignments can be changed in MAX7219_DEBUG section + * of configuration_adv.h + * + * You first call Max7219_init() and then you have 3 support functions available + * to control the LED's in the 8x8 grid. + * + * void Max7219_init(); + * void Max7219_PutByte(uint8_t data); + * void Max7219(uint8_t reg, uint8_t data); + * void Max7219_LED_On( int8_t row, int8_t col); + * void Max7219_LED_Off( int8_t row, int8_t col); + * void Max7219_LED_Toggle( int8_t row, int8_t col); + * void Max7219_Clear_Row( int8_t row); + * void Max7219_Clear_Column( int8_t col); + * void Max7219_Set_Row( int8_t row, int8_t val); + * void Max7219_Set_Column( int8_t column, int8_t val); + * void Max7219_idle_tasks(); + */ + + +#if ENABLED(MAX7219_DEBUG) + // + // define max7219 registers + // + #define max7219_reg_noop 0x00 + #define max7219_reg_digit0 0x01 + #define max7219_reg_digit1 0x02 + #define max7219_reg_digit2 0x03 + #define max7219_reg_digit3 0x04 + #define max7219_reg_digit4 0x05 + #define max7219_reg_digit5 0x06 + #define max7219_reg_digit6 0x07 + #define max7219_reg_digit7 0x08 + + #define max7219_reg_intensity 0x0a + #define max7219_reg_displayTest 0x0f + #define max7219_reg_decodeMode 0x09 + #define max7219_reg_scanLimit 0x0b + #define max7219_reg_shutdown 0x0c + + + void Max7219_init(); + void Max7219_PutByte(uint8_t data); + void Max7219(uint8_t reg, uint8_t data); + void Max7219_LED_On( int8_t row, int8_t col); + void Max7219_LED_Off( int8_t row, int8_t col); + void Max7219_LED_Toggle( int8_t row, int8_t col); + void Max7219_Clear_Row( int8_t row); + void Max7219_Clear_Column( int8_t col); + void Max7219_Set_Row( int8_t row, uint8_t val); + void Max7219_Set_Column( int8_t col, uint8_t val); + void Max7219_idle_tasks(); +#endif + + diff --git a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h index 8c52ba38a..71bfc4a69 100644 --- a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h +++ b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h @@ -1382,4 +1382,30 @@ #endif // I2C_POSITION_ENCODERS +/** + * Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on + * eBay for under $2.00 (including shipping) and only require 3 signal wires. + * + * Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0 + */ + +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display + #define Max7219_data_in 57 // 78 on Re-ARM + #define Max7219_load 44 // 79 on Re-ARM + + /* + * These are sample debug features that can be turned on and configured for your use. + * The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts. + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning + #define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix + #define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix + + #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix + // If you have stuttering on your Delta printer, this option may help you understand how + // various tweaks you make to your configuration are affecting the printer. +#endif + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Anet/A6/Configuration_adv.h b/Marlin/example_configurations/Anet/A6/Configuration_adv.h index fbb7573a3..e12347eb9 100644 --- a/Marlin/example_configurations/Anet/A6/Configuration_adv.h +++ b/Marlin/example_configurations/Anet/A6/Configuration_adv.h @@ -1382,4 +1382,30 @@ #endif // I2C_POSITION_ENCODERS +/** + * Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on + * eBay for under $2.00 (including shipping) and only require 3 signal wires. + * + * Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0 + */ + +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display + #define Max7219_data_in 57 // 78 on Re-ARM + #define Max7219_load 44 // 79 on Re-ARM + + /* + * These are sample debug features that can be turned on and configured for your use. + * The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts. + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning + #define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix + #define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix + + #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix + // If you have stuttering on your Delta printer, this option may help you understand how + // various tweaks you make to your configuration are affecting the printer. +#endif + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Anet/A8/Configuration_adv.h b/Marlin/example_configurations/Anet/A8/Configuration_adv.h index 4812733d5..73dcf7595 100644 --- a/Marlin/example_configurations/Anet/A8/Configuration_adv.h +++ b/Marlin/example_configurations/Anet/A8/Configuration_adv.h @@ -1382,4 +1382,30 @@ #endif // I2C_POSITION_ENCODERS +/** + * Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on + * eBay for under $2.00 (including shipping) and only require 3 signal wires. + * + * Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0 + */ + +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display + #define Max7219_data_in 57 // 78 on Re-ARM + #define Max7219_load 44 // 79 on Re-ARM + + /* + * These are sample debug features that can be turned on and configured for your use. + * The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts. + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning + #define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix + #define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix + + #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix + // If you have stuttering on your Delta printer, this option may help you understand how + // various tweaks you make to your configuration are affecting the printer. +#endif + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h b/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h index aed6aad19..1157da121 100644 --- a/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h +++ b/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h @@ -1382,4 +1382,30 @@ #endif // I2C_POSITION_ENCODERS +/** + * Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on + * eBay for under $2.00 (including shipping) and only require 3 signal wires. + * + * Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0 + */ + +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display + #define Max7219_data_in 57 // 78 on Re-ARM + #define Max7219_load 44 // 79 on Re-ARM + + /* + * These are sample debug features that can be turned on and configured for your use. + * The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts. + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning + #define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix + #define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix + + #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix + // If you have stuttering on your Delta printer, this option may help you understand how + // various tweaks you make to your configuration are affecting the printer. +#endif + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h b/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h index b0dbdadba..b22e092d1 100644 --- a/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h +++ b/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h @@ -1382,4 +1382,30 @@ #endif // I2C_POSITION_ENCODERS +/** + * Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on + * eBay for under $2.00 (including shipping) and only require 3 signal wires. + * + * Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0 + */ + +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display + #define Max7219_data_in 57 // 78 on Re-ARM + #define Max7219_load 44 // 79 on Re-ARM + + /* + * These are sample debug features that can be turned on and configured for your use. + * The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts. + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning + #define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix + #define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix + + #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix + // If you have stuttering on your Delta printer, this option may help you understand how + // various tweaks you make to your configuration are affecting the printer. +#endif + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h b/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h index aed6aad19..1157da121 100644 --- a/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h +++ b/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h @@ -1382,4 +1382,30 @@ #endif // I2C_POSITION_ENCODERS +/** + * Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on + * eBay for under $2.00 (including shipping) and only require 3 signal wires. + * + * Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0 + */ + +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display + #define Max7219_data_in 57 // 78 on Re-ARM + #define Max7219_load 44 // 79 on Re-ARM + + /* + * These are sample debug features that can be turned on and configured for your use. + * The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts. + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning + #define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix + #define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix + + #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix + // If you have stuttering on your Delta printer, this option may help you understand how + // various tweaks you make to your configuration are affecting the printer. +#endif + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Cartesio/Configuration_adv.h b/Marlin/example_configurations/Cartesio/Configuration_adv.h index 6782e070f..928e98935 100644 --- a/Marlin/example_configurations/Cartesio/Configuration_adv.h +++ b/Marlin/example_configurations/Cartesio/Configuration_adv.h @@ -1382,4 +1382,30 @@ #endif // I2C_POSITION_ENCODERS +/** + * Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on + * eBay for under $2.00 (including shipping) and only require 3 signal wires. + * + * Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0 + */ + +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display + #define Max7219_data_in 57 // 78 on Re-ARM + #define Max7219_load 44 // 79 on Re-ARM + + /* + * These are sample debug features that can be turned on and configured for your use. + * The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts. + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning + #define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix + #define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix + + #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix + // If you have stuttering on your Delta printer, this option may help you understand how + // various tweaks you make to your configuration are affecting the printer. +#endif + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Felix/Configuration_adv.h b/Marlin/example_configurations/Felix/Configuration_adv.h index 638915b91..a16fbf766 100644 --- a/Marlin/example_configurations/Felix/Configuration_adv.h +++ b/Marlin/example_configurations/Felix/Configuration_adv.h @@ -1382,4 +1382,30 @@ #endif // I2C_POSITION_ENCODERS +/** + * Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on + * eBay for under $2.00 (including shipping) and only require 3 signal wires. + * + * Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0 + */ + +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display + #define Max7219_data_in 57 // 78 on Re-ARM + #define Max7219_load 44 // 79 on Re-ARM + + /* + * These are sample debug features that can be turned on and configured for your use. + * The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts. + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning + #define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix + #define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix + + #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix + // If you have stuttering on your Delta printer, this option may help you understand how + // various tweaks you make to your configuration are affecting the printer. +#endif + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Folger Tech/i3-2020/Configuration_adv.h b/Marlin/example_configurations/Folger Tech/i3-2020/Configuration_adv.h index 960b1b5f8..e3ce65ad9 100644 --- a/Marlin/example_configurations/Folger Tech/i3-2020/Configuration_adv.h +++ b/Marlin/example_configurations/Folger Tech/i3-2020/Configuration_adv.h @@ -1382,4 +1382,30 @@ #endif // I2C_POSITION_ENCODERS +/** + * Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on + * eBay for under $2.00 (including shipping) and only require 3 signal wires. + * + * Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0 + */ + +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display + #define Max7219_data_in 57 // 78 on Re-ARM + #define Max7219_load 44 // 79 on Re-ARM + + /* + * These are sample debug features that can be turned on and configured for your use. + * The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts. + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning + #define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix + #define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix + + #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix + // If you have stuttering on your Delta printer, this option may help you understand how + // various tweaks you make to your configuration are affecting the printer. +#endif + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h b/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h index 751759c30..e86f802ae 100644 --- a/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h +++ b/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h @@ -1382,4 +1382,30 @@ #endif // I2C_POSITION_ENCODERS +/** + * Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on + * eBay for under $2.00 (including shipping) and only require 3 signal wires. + * + * Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0 + */ + +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display + #define Max7219_data_in 57 // 78 on Re-ARM + #define Max7219_load 44 // 79 on Re-ARM + + /* + * These are sample debug features that can be turned on and configured for your use. + * The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts. + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning + #define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix + #define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix + + #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix + // If you have stuttering on your Delta printer, this option may help you understand how + // various tweaks you make to your configuration are affecting the printer. +#endif + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Malyan/M150/Configuration_adv.h b/Marlin/example_configurations/Malyan/M150/Configuration_adv.h index 4a7930605..f29f66217 100644 --- a/Marlin/example_configurations/Malyan/M150/Configuration_adv.h +++ b/Marlin/example_configurations/Malyan/M150/Configuration_adv.h @@ -1382,4 +1382,30 @@ #endif // I2C_POSITION_ENCODERS +/** + * Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on + * eBay for under $2.00 (including shipping) and only require 3 signal wires. + * + * Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0 + */ + +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display + #define Max7219_data_in 57 // 78 on Re-ARM + #define Max7219_load 44 // 79 on Re-ARM + + /* + * These are sample debug features that can be turned on and configured for your use. + * The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts. + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning + #define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix + #define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix + + #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix + // If you have stuttering on your Delta printer, this option may help you understand how + // various tweaks you make to your configuration are affecting the printer. +#endif + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/RigidBot/Configuration_adv.h b/Marlin/example_configurations/RigidBot/Configuration_adv.h index 8fbd278c7..b57af74b3 100644 --- a/Marlin/example_configurations/RigidBot/Configuration_adv.h +++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h @@ -1382,4 +1382,30 @@ #endif // I2C_POSITION_ENCODERS +/** + * Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on + * eBay for under $2.00 (including shipping) and only require 3 signal wires. + * + * Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0 + */ + +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display + #define Max7219_data_in 57 // 78 on Re-ARM + #define Max7219_load 44 // 79 on Re-ARM + + /* + * These are sample debug features that can be turned on and configured for your use. + * The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts. + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning + #define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix + #define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix + + #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix + // If you have stuttering on your Delta printer, this option may help you understand how + // various tweaks you make to your configuration are affecting the printer. +#endif + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/SCARA/Configuration_adv.h b/Marlin/example_configurations/SCARA/Configuration_adv.h index cab69c2b1..da8e0ae0e 100644 --- a/Marlin/example_configurations/SCARA/Configuration_adv.h +++ b/Marlin/example_configurations/SCARA/Configuration_adv.h @@ -1382,4 +1382,30 @@ #endif // I2C_POSITION_ENCODERS +/** + * Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on + * eBay for under $2.00 (including shipping) and only require 3 signal wires. + * + * Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0 + */ + +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display + #define Max7219_data_in 57 // 78 on Re-ARM + #define Max7219_load 44 // 79 on Re-ARM + + /* + * These are sample debug features that can be turned on and configured for your use. + * The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts. + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning + #define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix + #define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix + + #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix + // If you have stuttering on your Delta printer, this option may help you understand how + // various tweaks you make to your configuration are affecting the printer. +#endif + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Sanguinololu/Configuration_adv.h b/Marlin/example_configurations/Sanguinololu/Configuration_adv.h index 953894cba..46384be46 100644 --- a/Marlin/example_configurations/Sanguinololu/Configuration_adv.h +++ b/Marlin/example_configurations/Sanguinololu/Configuration_adv.h @@ -1371,4 +1371,30 @@ #endif // I2C_POSITION_ENCODERS +/** + * Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on + * eBay for under $2.00 (including shipping) and only require 3 signal wires. + * + * Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0 + */ + +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display + #define Max7219_data_in 57 // 78 on Re-ARM + #define Max7219_load 44 // 79 on Re-ARM + + /* + * These are sample debug features that can be turned on and configured for your use. + * The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts. + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning + #define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix + #define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix + + #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix + // If you have stuttering on your Delta printer, this option may help you understand how + // various tweaks you make to your configuration are affecting the printer. +#endif + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h index 95630746d..610c084ce 100644 --- a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h +++ b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h @@ -1382,4 +1382,30 @@ #endif // I2C_POSITION_ENCODERS +/** + * Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on + * eBay for under $2.00 (including shipping) and only require 3 signal wires. + * + * Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0 + */ + +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display + #define Max7219_data_in 57 // 78 on Re-ARM + #define Max7219_load 44 // 79 on Re-ARM + + /* + * These are sample debug features that can be turned on and configured for your use. + * The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts. + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning + #define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix + #define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix + + #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix + // If you have stuttering on your Delta printer, this option may help you understand how + // various tweaks you make to your configuration are affecting the printer. +#endif + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h b/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h index 1a31f5eda..6265725f1 100644 --- a/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h +++ b/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h @@ -1395,4 +1395,30 @@ #endif // I2C_POSITION_ENCODERS +/** + * Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on + * eBay for under $2.00 (including shipping) and only require 3 signal wires. + * + * Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0 + */ + +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display + #define Max7219_data_in 57 // 78 on Re-ARM + #define Max7219_load 44 // 79 on Re-ARM + + /* + * These are sample debug features that can be turned on and configured for your use. + * The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts. + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning + #define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix + #define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix + + #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix + // If you have stuttering on your Delta printer, this option may help you understand how + // various tweaks you make to your configuration are affecting the printer. +#endif + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h b/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h index 998b25bac..703300a67 100644 --- a/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h +++ b/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h @@ -1382,4 +1382,30 @@ #endif // I2C_POSITION_ENCODERS +/** + * Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on + * eBay for under $2.00 (including shipping) and only require 3 signal wires. + * + * Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0 + */ + +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display + #define Max7219_data_in 57 // 78 on Re-ARM + #define Max7219_load 44 // 79 on Re-ARM + + /* + * These are sample debug features that can be turned on and configured for your use. + * The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts. + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning + #define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix + #define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix + + #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix + // If you have stuttering on your Delta printer, this option may help you understand how + // various tweaks you make to your configuration are affecting the printer. +#endif + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h index 3715a421a..1f21b2f21 100644 --- a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -1384,4 +1384,30 @@ #endif // I2C_POSITION_ENCODERS +/** + * Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on + * eBay for under $2.00 (including shipping) and only require 3 signal wires. + * + * Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0 + */ + +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display + #define Max7219_data_in 57 // 78 on Re-ARM + #define Max7219_load 44 // 79 on Re-ARM + + /* + * These are sample debug features that can be turned on and configured for your use. + * The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts. + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning + #define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix + #define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix + + #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix + // If you have stuttering on your Delta printer, this option may help you understand how + // various tweaks you make to your configuration are affecting the printer. +#endif + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h index e4eaec7c4..4d41b9280 100644 --- a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -1384,4 +1384,30 @@ #endif // I2C_POSITION_ENCODERS +/** + * Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on + * eBay for under $2.00 (including shipping) and only require 3 signal wires. + * + * Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0 + */ + +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display + #define Max7219_data_in 57 // 78 on Re-ARM + #define Max7219_load 44 // 79 on Re-ARM + + /* + * These are sample debug features that can be turned on and configured for your use. + * The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts. + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning + #define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix + #define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix + + #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix + // If you have stuttering on your Delta printer, this option may help you understand how + // various tweaks you make to your configuration are affecting the printer. +#endif + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/delta/generic/Configuration_adv.h b/Marlin/example_configurations/delta/generic/Configuration_adv.h index e4eaec7c4..4d41b9280 100644 --- a/Marlin/example_configurations/delta/generic/Configuration_adv.h +++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h @@ -1384,4 +1384,30 @@ #endif // I2C_POSITION_ENCODERS +/** + * Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on + * eBay for under $2.00 (including shipping) and only require 3 signal wires. + * + * Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0 + */ + +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display + #define Max7219_data_in 57 // 78 on Re-ARM + #define Max7219_load 44 // 79 on Re-ARM + + /* + * These are sample debug features that can be turned on and configured for your use. + * The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts. + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning + #define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix + #define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix + + #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix + // If you have stuttering on your Delta printer, this option may help you understand how + // various tweaks you make to your configuration are affecting the printer. +#endif + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h index e4eaec7c4..4d41b9280 100644 --- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h @@ -1384,4 +1384,30 @@ #endif // I2C_POSITION_ENCODERS +/** + * Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on + * eBay for under $2.00 (including shipping) and only require 3 signal wires. + * + * Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0 + */ + +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display + #define Max7219_data_in 57 // 78 on Re-ARM + #define Max7219_load 44 // 79 on Re-ARM + + /* + * These are sample debug features that can be turned on and configured for your use. + * The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts. + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning + #define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix + #define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix + + #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix + // If you have stuttering on your Delta printer, this option may help you understand how + // various tweaks you make to your configuration are affecting the printer. +#endif + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h index ffabd4eed..35836cefa 100644 --- a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h +++ b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h @@ -1389,4 +1389,30 @@ #endif // I2C_POSITION_ENCODERS +/** + * Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on + * eBay for under $2.00 (including shipping) and only require 3 signal wires. + * + * Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0 + */ + +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display + #define Max7219_data_in 57 // 78 on Re-ARM + #define Max7219_load 44 // 79 on Re-ARM + + /* + * These are sample debug features that can be turned on and configured for your use. + * The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts. + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning + #define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix + #define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix + + #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix + // If you have stuttering on your Delta printer, this option may help you understand how + // various tweaks you make to your configuration are affecting the printer. +#endif + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h index 57dc10197..a7cd5c764 100644 --- a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h +++ b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h @@ -1384,4 +1384,30 @@ #endif // I2C_POSITION_ENCODERS +/** + * Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on + * eBay for under $2.00 (including shipping) and only require 3 signal wires. + * + * Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0 + */ + +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display + #define Max7219_data_in 57 // 78 on Re-ARM + #define Max7219_load 44 // 79 on Re-ARM + + /* + * These are sample debug features that can be turned on and configured for your use. + * The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts. + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning + #define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix + #define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix + + #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix + // If you have stuttering on your Delta printer, this option may help you understand how + // various tweaks you make to your configuration are affecting the printer. +#endif + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h index 51968f707..df49c31a0 100644 --- a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h +++ b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h @@ -1625,7 +1625,7 @@ // Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } +#define SERVO_DELAY { 300, 300 } // Servo deactivation // diff --git a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h index b6df0fe5e..1848bcf50 100644 --- a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h +++ b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h @@ -1382,4 +1382,30 @@ #endif // I2C_POSITION_ENCODERS +/** + * Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on + * eBay for under $2.00 (including shipping) and only require 3 signal wires. + * + * Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0 + */ + +#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display + #define Max7219_data_in 57 // 78 on Re-ARM + #define Max7219_load 44 // 79 on Re-ARM + + /* + * These are sample debug features that can be turned on and configured for your use. + * The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts. + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning + #define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix + #define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix + + #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix + // If you have stuttering on your Delta printer, this option may help you understand how + // various tweaks you make to your configuration are affecting the printer. +#endif + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/makibox/Configuration_adv.h b/Marlin/example_configurations/makibox/Configuration_adv.h index 2e755a1ec..2ea7f33e8 100644 --- a/Marlin/example_configurations/makibox/Configuration_adv.h +++ b/Marlin/example_configurations/makibox/Configuration_adv.h @@ -1382,4 +1382,30 @@ #endif // I2C_POSITION_ENCODERS +/** + * Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on + * eBay for under $2.00 (including shipping) and only require 3 signal wires. + * + * Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0 + */ + +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display + #define Max7219_data_in 57 // 78 on Re-ARM + #define Max7219_load 44 // 79 on Re-ARM + + /* + * These are sample debug features that can be turned on and configured for your use. + * The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts. + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning + #define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix + #define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix + + #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix + // If you have stuttering on your Delta printer, this option may help you understand how + // various tweaks you make to your configuration are affecting the printer. +#endif + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h index fc07c0456..c878d4951 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h @@ -1382,4 +1382,30 @@ #endif // I2C_POSITION_ENCODERS +/** + * Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on + * eBay for under $2.00 (including shipping) and only require 3 signal wires. + * + * Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0 + */ + +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display + #define Max7219_data_in 57 // 78 on Re-ARM + #define Max7219_load 44 // 79 on Re-ARM + + /* + * These are sample debug features that can be turned on and configured for your use. + * The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts. + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning + #define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix + #define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix + + #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix + // If you have stuttering on your Delta printer, this option may help you understand how + // various tweaks you make to your configuration are affecting the printer. +#endif + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/wt150/Configuration_adv.h b/Marlin/example_configurations/wt150/Configuration_adv.h index d8f6c3a3b..0aa8b7ef0 100644 --- a/Marlin/example_configurations/wt150/Configuration_adv.h +++ b/Marlin/example_configurations/wt150/Configuration_adv.h @@ -1382,4 +1382,30 @@ #endif // I2C_POSITION_ENCODERS +/** + * Debug LED's using an 8x8 LED Matrix driven by a Max7219 chip. Fully assembled versions are available on + * eBay for under $2.00 (including shipping) and only require 3 signal wires. + * + * Check out auctions similar to this: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=332349290049&_sacat=0 + */ + +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define Max7219_clock 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display + #define Max7219_data_in 57 // 78 on Re-ARM + #define Max7219_load 44 // 79 on Re-ARM + + /* + * These are sample debug features that can be turned on and configured for your use. + * The developer will need to manage the use of the various LED's in the 8x8 matrix to avoid conflicts. + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix from idle() routine if firmware is functioning + #define MAX7219_DEBUG_STEPPER_HEAD 3 // Display row position of stepper queue head on this line and the next line of LED matrix + #define MAX7219_DEBUG_STEPPER_TAIL 5 // Display row position of stepper queue tail on this line and the next line of LED matrix + + #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Display row position of stepper queue depth on this line and the next line of LED matrix + // If you have stuttering on your Delta printer, this option may help you understand how + // various tweaks you make to your configuration are affecting the printer. +#endif + #endif // CONFIGURATION_ADV_H