Update FYSETC S6 pins (#16559)

This commit is contained in:
George Fu 2020-01-18 03:16:05 +08:00 committed by Scott Lahteine
parent 9520e5121c
commit 4108c5d01f
6 changed files with 93 additions and 71 deletions

View file

@ -1948,6 +1948,7 @@
//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on)
//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight
//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight
//#define FYSETC_GENERIC_12864_1_1 // Larger display with basic ON/OFF backlight.
//
// Factory display for Creality CR-10

View file

@ -114,7 +114,7 @@
#define MINIPANEL
#elif ANY(FYSETC_MINI_12864_X_X, FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0, FYSETC_MINI_12864_2_1)
#elif ANY(FYSETC_MINI_12864_X_X, FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0, FYSETC_MINI_12864_2_1, FYSETC_GENERIC_12864_1_1)
#define FYSETC_MINI_12864
#define DOGLCD

View file

@ -262,7 +262,7 @@
#elif EITHER(MKS_MINI_12864, ENDER2_STOCKDISPLAY)
#define _LCD_CONTRAST_MIN 120
#define _LCD_CONTRAST_INIT 195
#elif ANY(FYSETC_MINI_12864_X_X, FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0, FYSETC_MINI_12864_2_1)
#elif ENABLED(FYSETC_MINI_12864)
#define _LCD_CONTRAST_INIT 220
#elif ENABLED(ULTI_CONTROLLER)
#define _LCD_CONTRAST_INIT 127

View file

@ -1904,6 +1904,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
+ ENABLED(FYSETC_MINI_12864_1_2) \
+ ENABLED(FYSETC_MINI_12864_2_0) \
+ ENABLED(FYSETC_MINI_12864_2_1) \
+ ENABLED(FYSETC_GENERIC_12864_1_1) \
+ ENABLED(CR10_STOCKDISPLAY) \
+ ENABLED(ANET_FULL_GRAPHICS_LCD) \
+ ENABLED(AZSMZ_12864) \

View file

@ -225,9 +225,11 @@
#define DOGLCD_A0 16
#define DOGLCD_CS 17
#define LCD_BACKLIGHT_PIN -1
#define KILL_PIN 41
#if ENABLED(FYSETC_GENERIC_12864_1_1)
#define LCD_BACKLIGHT_PIN 27
#endif
#define KILL_PIN 41
#define LCD_RESET_PIN 23 // Must be high or open for LCD to operate normally.
// Seems to work best if left open.

View file

@ -42,6 +42,11 @@
//
#define FLASH_EEPROM_EMULATION
//#define SRAM_EEPROM_EMULATION
//#define I2C_EEPROM
#ifdef I2C_EEPROM
#undef E2END // Defined in Arduino Core STM32 to be used with EEPROM emulation. This board uses a real EEPROM.
#define E2END 0xFFF // 4KB
#endif
//
// Limit Switches
@ -93,9 +98,9 @@
#define E2_CS_PIN PC15
#if HAS_TMC220x
/**
* TMC2208/TMC2209 stepper drivers
*/
//
// TMC2208/TMC2209 stepper drivers
//
//
// Software serial
@ -159,23 +164,46 @@
//
// LCD / Controller
//
#if HAS_SPI_LCD
#define BEEPER_PIN PC9
#define BTN_ENC PA8
#define BEEPER_PIN PC9
#define SD_DETECT_PIN PB10
#if ENABLED(CR10_STOCKDISPLAY)
#define LCD_PINS_RS PD0
#if ENABLED(FYSETC_MINI_12864)
//
// See https://wiki.fysetc.com/Mini12864_Panel/?fbclid=IwAR1FyjuNdVOOy9_xzky3qqo_WeM5h-4gpRnnWhQr_O1Ef3h0AFnFXmCehK8
//
#define DOGLCD_A0 PD2
#define BTN_EN1 PC11
#define BTN_EN2 PC10
#define LCD_PINS_ENABLE PD1
#define LCD_PINS_D4 PC12
// CR10_Stock Display needs a different delay setting on SKR PRO v1.1, so undef it here.
// It will be defined again at the #HAS_GRAPHICAL_LCD section below.
#undef ST7920_DELAY_1
#undef ST7920_DELAY_2
#undef ST7920_DELAY_3
#else
#define LCD_PINS_RS PD2
#define BTN_EN1 PC6
#define BTN_EN2 PC7
#define SD_DETECT_PIN PB10
#define LCD_SDSS PA4
#define LCD_PINS_ENABLE PC11
#define LCD_PINS_D4 PC10
#if ENABLED(FYSETC_MINI_12864)
// See https://wiki.fysetc.com/Mini12864_Panel
#define DOGLCD_CS PC11
//#define LCD_BACKLIGHT_PIN -1
//#define KILL_PIN -1
#define DOGLCD_A0 PD2
#if ENABLED(FYSETC_GENERIC_12864_1_1)
#define LCD_BACKLIGHT_PIN PD0
#endif
#define LCD_RESET_PIN PC10 // Must be high or open for LCD to operate normally.
// Seems to work best if left open.
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
#ifndef RGB_LED_R_PIN
#define RGB_LED_R_PIN PC12
@ -189,40 +217,30 @@
#elif ENABLED(FYSETC_MINI_12864_2_1)
#define NEOPIXEL_PIN PC12
#endif
#endif // !FYSETC_MINI_12864
#elif HAS_GRAPHICAL_LCD
#define LCD_PINS_RS PD2
#define LCD_PINS_ENABLE PC11
#define LCD_PINS_D4 PC10
#if ENABLED(ULTIPANEL)
#define LCD_PINS_D5 PC12
#define LCD_PINS_D6 PD0
#define LCD_PINS_D7 PD1
#if ENABLED(MKS_MINI_12864)
#define DOGLCD_CS PC12
#define DOGLCD_A0 PD0
#endif
#endif
#endif
#if ENABLED(NEWPANEL)
#define BTN_EN1 PC6
#define BTN_EN2 PC7
#define BTN_ENC PA8
#endif
// Alter timing for graphical display
#if HAS_GRAPHICAL_LCD
#ifndef ST7920_DELAY_1
#define ST7920_DELAY_1 DELAY_NS(96)
#endif
#ifndef ST7920_DELAY_2
#define ST7920_DELAY_2 DELAY_NS(48)
#endif
#ifndef ST7920_DELAY_3
#define ST7920_DELAY_3 DELAY_NS(600)
#endif
#endif
// Alter timing for graphical display
#if HAS_GRAPHICAL_LCD
#ifndef BOARD_ST7920_DELAY_1
#define BOARD_ST7920_DELAY_1 DELAY_NS(103)
#endif
#ifndef BOARD_ST7920_DELAY_2
#define BOARD_ST7920_DELAY_2 DELAY_NS(51)
#endif
#ifndef BOARD_ST7920_DELAY_3
#define BOARD_ST7920_DELAY_3 DELAY_NS(642)
#endif
#endif
#endif // HAS_SPI_LCD
#ifndef RGB_LED_R_PIN
#define RGB_LED_R_PIN PB6