Extended condition macros (#13419)

Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add:
- Alias `ANY(...)` for `!DISABLED(...)`
- Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...`
- Alias `EITHER(A,B)` for `ANY(...)`
- Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)`
- `NONE(...)` for `DISABLED(...)`

Marlin/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1015,7 +1015,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1108,7 +1108,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1134,7 +1134,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1203,7 +1203,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2037,7 +2037,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2066,7 +2066,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

Marlin/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1654,7 +1654,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

Marlin/src/HAL/HAL_AVR/HAL.h

@@ -182,7 +182,7 @@ FORCE_INLINE void HAL_timer_start(const uint8_t timer_num, const uint32_t freque
 #define TIMER_OCR_0             OCR0A
 #define TIMER_COUNTER_0         TCNT0
 
-#define _CAT(a, ...) a ## __VA_ARGS__
+#define _CAT(a,V...) a##V
 #define HAL_timer_set_compare(timer, compare) (_CAT(TIMER_OCR_, timer) = compare)
 #define HAL_timer_get_compare(timer) _CAT(TIMER_OCR_, timer)
 #define HAL_timer_get_count(timer) _CAT(TIMER_COUNTER_, timer)

Marlin/src/HAL/HAL_AVR/fastio_AVR.h

@@ -286,7 +286,7 @@ enum ClockSource2 : char {
   #define PWM_CHK_FAN_B(P) (P == E0_AUTO_FAN_PIN || P == E1_AUTO_FAN_PIN || P == E2_AUTO_FAN_PIN || P == E3_AUTO_FAN_PIN || P == E4_AUTO_FAN_PIN || P == E5_AUTO_FAN_PIN || P == CHAMBER_AUTO_FAN_PIN)
 #endif
 
-#if PIN_EXISTS(FAN) || PIN_EXISTS(FAN1) || PIN_EXISTS(FAN2)
+#if ANY_PIN(FAN, FAN1, FAN2)
   #if PIN_EXISTS(FAN2)
     #define PWM_CHK_FAN_A(P) (P == FAN_PIN || P == FAN1_PIN || P == FAN2_PIN)
   #elif PIN_EXISTS(FAN1)

Marlin/src/HAL/HAL_AVR/persistent_store_eeprom.cpp

@@ -23,7 +23,7 @@
 
 #include "../../inc/MarlinConfig.h"
 
-#if ENABLED(EEPROM_SETTINGS) || ENABLED(SD_FIRMWARE_UPDATE)
+#if EITHER(EEPROM_SETTINGS, SD_FIRMWARE_UPDATE)
 
 #include "../shared/persistent_store_api.h"
 

Marlin/src/HAL/HAL_ESP32/HAL.h

@@ -36,7 +36,7 @@
 #include <Arduino.h>
 
 #undef DISABLED
-#define DISABLED(b) (!_CAT(SWITCH_ENABLED_, b))
+#define DISABLED(V...) DO(DIS,&&,V)
 
 #include "../shared/math_32bit.h"
 #include "../shared/HAL_SPI.h"

Marlin/src/HAL/HAL_LINUX/spi_pins.h

@@ -23,7 +23,7 @@
 
 #include "src/core/macros.h"
 
-#if ENABLED(SDSUPPORT) && ENABLED(DOGLCD) && (LCD_PINS_D4 == SCK_PIN || LCD_PINS_ENABLE == MOSI_PIN || DOGLCD_SCK == SCK_PIN || DOGLCD_MOSI == MOSI_PIN)
+#if BOTH(SDSUPPORT, DOGLCD) && (LCD_PINS_D4 == SCK_PIN || LCD_PINS_ENABLE == MOSI_PIN || DOGLCD_SCK == SCK_PIN || DOGLCD_MOSI == MOSI_PIN)
   #define LPC_SOFTWARE_SPI  // If the SD card and LCD adapter share the same SPI pins, then software SPI is currently
                             // needed due to the speed and mode requred for communicating with each device being different.
                             // This requirement can be removed if the SPI access to these devices is updated to use

Marlin/src/HAL/HAL_LPC1768/main.cpp

@@ -98,7 +98,7 @@ void HAL_init() {
 
 // HAL idle task
 void HAL_idletask(void) {
-  #if ENABLED(SDSUPPORT) && ENABLED(SHARED_SD_CARD)
+  #if BOTH(SDSUPPORT, SHARED_SD_CARD)
     // If Marlin is using the SD card we need to lock it to prevent access from
     // a PC via USB.
     // Other HALs use IS_SD_PRINTING() and IS_SD_FILE_OPEN() to check for access but

Marlin/src/HAL/HAL_STM32/persistent_store_impl.cpp

@@ -55,7 +55,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
     uint8_t v = *value;
 
     // Save to either external EEPROM, program flash or Backup SRAM
-    #if ENABLED(SPI_EEPROM) || ENABLED(I2C_EEPROM)
+    #if EITHER(SPI_EEPROM, I2C_EEPROM)
       // EEPROM has only ~100,000 write cycles,
       // so only write bytes that have changed!
       uint8_t * const p = (uint8_t * const)pos;
@@ -87,7 +87,7 @@ bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t
   do {
     // Read from either external EEPROM, program flash or Backup SRAM
     const uint8_t c = (
-      #if ENABLED(SPI_EEPROM) || ENABLED(I2C_EEPROM)
+      #if EITHER(SPI_EEPROM, I2C_EEPROM)
         eeprom_read_byte((uint8_t*)pos)
       #elif DISABLED(EEPROM_EMULATED_WITH_SRAM)
         eeprom_buffered_read_byte(pos)
@@ -105,7 +105,7 @@ bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t
 }
 
 size_t PersistentStore::capacity() {
-  #if ENABLED(SPI_EEPROM) || ENABLED(I2C_EEPROM)
+  #if EITHER(SPI_EEPROM, I2C_EEPROM)
     return E2END + 1;
   #elif DISABLED(EEPROM_EMULATED_WITH_SRAM)
     return E2END + 1;

Marlin/src/HAL/HAL_STM32F1/persistent_store_flash.cpp

@@ -32,7 +32,7 @@
 #include "../../inc/MarlinConfig.h"
 
 // This is for EEPROM emulation in flash
-#if ENABLED(EEPROM_SETTINGS) && ENABLED(FLASH_EEPROM_EMULATION)
+#if BOTH(EEPROM_SETTINGS, FLASH_EEPROM_EMULATION)
 
 #include "../shared/persistent_store_api.h"
 

Marlin/src/HAL/shared/persistent_store_api.cpp

@@ -22,7 +22,7 @@
  */
 #include "../../inc/MarlinConfigPre.h"
 
-#if ENABLED(EEPROM_SETTINGS) || ENABLED(SD_FIRMWARE_UPDATE)
+#if EITHER(EEPROM_SETTINGS, SD_FIRMWARE_UPDATE)
 
   #include "persistent_store_api.h"
   PersistentStore persistentStore;

Marlin/src/Marlin.cpp

@@ -128,7 +128,7 @@
   #include "feature/bedlevel/bedlevel.h"
 #endif
 
-#if ENABLED(ADVANCED_PAUSE_FEATURE) && ENABLED(PAUSE_PARK_NO_STEPPER_TIMEOUT)
+#if BOTH(ADVANCED_PAUSE_FEATURE, PAUSE_PARK_NO_STEPPER_TIMEOUT)
   #include "feature/pause.h"
 #endif
 
@@ -152,7 +152,7 @@
   #include "feature/fanmux.h"
 #endif
 
-#if DO_SWITCH_EXTRUDER || ENABLED(SWITCHING_NOZZLE) || ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if DO_SWITCH_EXTRUDER || ANY(SWITCHING_NOZZLE, PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
   #include "module/tool_change.h"
 #endif
 
@@ -328,7 +328,7 @@ void disable_all_steppers() {
       ExtUI::onFilamentRunout(ExtUI::getActiveTool());
     #endif
 
-    #if ENABLED(HOST_PROMPT_SUPPORT) || ENABLED(HOST_ACTION_COMMANDS)
+    #if EITHER(HOST_PROMPT_SUPPORT, HOST_ACTION_COMMANDS)
       const char tool = '0'
         #if NUM_RUNOUT_SENSORS > 1
           + active_extruder
@@ -443,7 +443,7 @@ void manage_inactivity(const bool ignore_stepper_queue/*=false*/) {
   }
 
   // Prevent steppers timing-out in the middle of M600
-  #if ENABLED(ADVANCED_PAUSE_FEATURE) && ENABLED(PAUSE_PARK_NO_STEPPER_TIMEOUT)
+  #if BOTH(ADVANCED_PAUSE_FEATURE, PAUSE_PARK_NO_STEPPER_TIMEOUT)
     #define MOVE_AWAY_TEST !did_pause_print
   #else
     #define MOVE_AWAY_TEST true
@@ -1000,7 +1000,7 @@ void setup() {
     dac_init();
   #endif
 
-  #if (ENABLED(Z_PROBE_SLED) || ENABLED(SOLENOID_PROBE)) && HAS_SOLENOID_1
+  #if EITHER(Z_PROBE_SLED, SOLENOID_PROBE) && HAS_SOLENOID_1
     OUT_WRITE(SOL1_PIN, LOW); // OFF
   #endif
 

Marlin/src/core/drivers.h

@@ -52,7 +52,7 @@
 #define AXIS_DRIVER_TYPE_X(T) _AXIS_DRIVER_TYPE(X,T)
 #define AXIS_DRIVER_TYPE_Y(T) _AXIS_DRIVER_TYPE(Y,T)
 #define AXIS_DRIVER_TYPE_Z(T) _AXIS_DRIVER_TYPE(Z,T)
-#define AXIS_DRIVER_TYPE_X2(T) ((ENABLED(X_DUAL_STEPPER_DRIVERS) || ENABLED(DUAL_X_CARRIAGE)) && _AXIS_DRIVER_TYPE(X2,T))
+#define AXIS_DRIVER_TYPE_X2(T) (EITHER(X_DUAL_STEPPER_DRIVERS, DUAL_X_CARRIAGE) && _AXIS_DRIVER_TYPE(X2,T))
 #define AXIS_DRIVER_TYPE_Y2(T) (ENABLED(Y_DUAL_STEPPER_DRIVERS) && _AXIS_DRIVER_TYPE(Y2,T))
 #define AXIS_DRIVER_TYPE_Z2(T) (Z_MULTI_STEPPER_DRIVERS && _AXIS_DRIVER_TYPE(Z2,T))
 #define AXIS_DRIVER_TYPE_Z3(T) (ENABLED(Z_TRIPLE_STEPPER_DRIVERS) && _AXIS_DRIVER_TYPE(Z3,T))

Marlin/src/core/macros.h

@@ -133,8 +133,25 @@
 
 #endif
 
+// Macros to chain up to 12 conditions
+#define _DO_1(W,C,A)       (_##W##_1(A))
+#define _DO_2(W,C,A,B)     (_##W##_1(A) C _##W##_1(B))
+#define _DO_3(W,C,A,V...)  (_##W##_1(A) C _DO_2(W,C,V))
+#define _DO_4(W,C,A,V...)  (_##W##_1(A) C _DO_3(W,C,V))
+#define _DO_5(W,C,A,V...)  (_##W##_1(A) C _DO_4(W,C,V))
+#define _DO_6(W,C,A,V...)  (_##W##_1(A) C _DO_5(W,C,V))
+#define _DO_7(W,C,A,V...)  (_##W##_1(A) C _DO_6(W,C,V))
+#define _DO_8(W,C,A,V...)  (_##W##_1(A) C _DO_7(W,C,V))
+#define _DO_9(W,C,A,V...)  (_##W##_1(A) C _DO_8(W,C,V))
+#define _DO_10(W,C,A,V...) (_##W##_1(A) C _DO_9(W,C,V))
+#define _DO_11(W,C,A,V...) (_##W##_1(A) C _DO_10(W,C,V))
+#define _DO_12(W,C,A,V...) (_##W##_1(A) C _DO_11(W,C,V))
+#define __DO_N(W,C,N,V...) _DO_##N(W,C,V)
+#define _DO_N(W,C,N,V...)  __DO_N(W,C,N,V)
+#define DO(W,C,V...)       _DO_N(W,C,NUM_ARGS(V),V)
+
 // Macros to support option testing
-#define _CAT(a, ...) a ## __VA_ARGS__
+#define _CAT(a,V...) a##V
 #define SWITCH_ENABLED_false 0
 #define SWITCH_ENABLED_true  1
 #define SWITCH_ENABLED_0     0
@@ -142,16 +159,33 @@
 #define SWITCH_ENABLED_0x0   0
 #define SWITCH_ENABLED_0x1   1
 #define SWITCH_ENABLED_      1
-#define ENABLED(b) _CAT(SWITCH_ENABLED_, b)
+#define _ENA_1(O)           _CAT(SWITCH_ENABLED_, O)
-#define DISABLED(b) !ENABLED(b)
+#define _DIS_1(O)           !_ENA_1(O)
+#define ENABLED(V...)       DO(ENA,&&,V)
+#define DISABLED(V...)      DO(DIS,&&,V)
 
-#define WITHIN(V,L,H) ((V) >= (L) && (V) <= (H))
+#define ANY(V...)          !DISABLED(V)
-#define NUMERIC(a) WITHIN(a, '0', '9')
+#define NONE(V...)          DISABLED(V)
-#define DECIMAL(a) (NUMERIC(a) || a == '.')
+#define ALL(V...)           ENABLED(V)
-#define NUMERIC_SIGNED(a) (NUMERIC(a) || (a) == '-' || (a) == '+')
+#define BOTH(V1,V2)         ALL(V1,V2)
-#define DECIMAL_SIGNED(a) (DECIMAL(a) || (a) == '-' || (a) == '+')
+#define EITHER(V1,V2)       ANY(V1,V2)
-#define COUNT(a) (sizeof(a)/sizeof(*a))
+
-#define ZERO(a) memset(a,0,sizeof(a))
+// Macros to support pins/buttons exist testing
+#define _PINEX_1(PN)        (defined(PN##_PIN) && PN##_PIN >= 0)
+#define PIN_EXISTS(V...)    DO(PINEX,&&,V)
+#define ANY_PIN(V...)       DO(PINEX,||,V)
+
+#define _BTNEX_1(BN)        (defined(BTN_##BN) && BTN_##BN >= 0)
+#define BUTTON_EXISTS(V...) DO(BTNEX,&&,V)
+#define ANY_BUTTON(V...)    DO(BTNEX,||,V)
+
+#define WITHIN(N,L,H)       ((N) >= (L) && (N) <= (H))
+#define NUMERIC(a)          WITHIN(a, '0', '9')
+#define DECIMAL(a)          (NUMERIC(a) || a == '.')
+#define NUMERIC_SIGNED(a)   (NUMERIC(a) || (a) == '-' || (a) == '+')
+#define DECIMAL_SIGNED(a)   (DECIMAL(a) || (a) == '-' || (a) == '+')
+#define COUNT(a)            (sizeof(a)/sizeof(*a))
+#define ZERO(a)             memset(a,0,sizeof(a))
 #define COPY(a,b) do{ \
     static_assert(sizeof(a[0]) == sizeof(b[0]), "COPY: '" STRINGIFY(a) "' and '" STRINGIFY(b) "' types (sizes) don't match!"); \
     memcpy(&a[0],&b[0],MIN(sizeof(a),sizeof(b))); \
@@ -165,8 +199,8 @@
 #define ARRAY_2(v1, v2, ...)                 { v1, v2 }
 #define ARRAY_1(v1, ...)                     { v1 }
 
-#define _ARRAY_N(N, ...) ARRAY_ ##N(__VA_ARGS__)
+#define _ARRAY_N(N,V...) ARRAY_##N(V)
-#define ARRAY_N(N, ...) _ARRAY_N(N, __VA_ARGS__)
+#define ARRAY_N(N,V...) _ARRAY_N(N,V)
 
 // Macros for adding
 #define INC_0 1
@@ -178,7 +212,7 @@
 #define INC_6 7
 #define INC_7 8
 #define INC_8 9
-#define INCREMENT_(n) INC_ ##n
+#define INCREMENT_(n) INC_##n
 #define INCREMENT(n) INCREMENT_(n)
 
 // Macros for subtracting
@@ -191,12 +225,9 @@
 #define DEC_7 6
 #define DEC_8 7
 #define DEC_9 8
-#define DECREMENT_(n) DEC_ ##n
+#define DECREMENT_(n) DEC_##n
 #define DECREMENT(n) DECREMENT_(n)
 
-#define PIN_EXISTS(PN)    (defined(PN ##_PIN) && PN ##_PIN >= 0)
-#define BUTTON_EXISTS(BN) (defined(BTN_## BN) && BTN_## BN >= 0)
-
 #define MMM_TO_MMS(MM_M) ((MM_M)/60.0f)
 #define MMS_TO_MMM(MM_S) ((MM_S)*60.0f)
 

Marlin/src/core/minmax.h

@@ -23,9 +23,9 @@
 #undef MIN
 #undef MAX
 
-// Pass NUM_ARGS(__VA_ARGS__) to use the number of arguments
+// Use NUM_ARGS(__VA_ARGS__) to get the number of variadic arguments
 #define _NUM_ARGS(_0,_24_,_23,_22,_21,_20,_19,_18,_17,_16,_15,_14,_13,_12,_11,_10,_9,_8,_7,_6,_5,_4,_3,_2,_1,N,...) N
-#define NUM_ARGS(...) _NUM_ARGS(0, __VA_ARGS__ ,24,23,22,21,20,19,18,17,16,15,14,13,12,11,10,9,8,7,6,5,4,3,2,1,0)
+#define NUM_ARGS(V...) _NUM_ARGS(0,V,24,23,22,21,20,19,18,17,16,15,14,13,12,11,10,9,8,7,6,5,4,3,2,1,0)
 
 #ifdef __cplusplus
 

Marlin/src/core/utility.cpp

@@ -35,7 +35,7 @@ void safe_delay(millis_t ms) {
   thermalManager.manage_heater(); // This keeps us safe if too many small safe_delay() calls are made
 }
 
-#if ENABLED(EEPROM_SETTINGS) || ENABLED(SD_FIRMWARE_UPDATE)
+#if EITHER(EEPROM_SETTINGS, SD_FIRMWARE_UPDATE)
 
   void crc16(uint16_t *crc, const void * const data, uint16_t cnt) {
     uint8_t *ptr = (uint8_t *)data;
@@ -48,7 +48,7 @@ void safe_delay(millis_t ms) {
 
 #endif // EEPROM_SETTINGS || SD_FIRMWARE_UPDATE
 
-#if ENABLED(ULTRA_LCD) || ENABLED(DEBUG_LEVELING_FEATURE) || ENABLED(EXTENSIBLE_UI)
+#if ANY(ULTRA_LCD, DEBUG_LEVELING_FEATURE, EXTENSIBLE_UI)
 
   char conv[8] = { 0 };
 

Marlin/src/core/utility.h

@@ -37,11 +37,11 @@ inline void serial_delay(const millis_t ms) {
   #endif
 }
 
-#if ENABLED(EEPROM_SETTINGS) || ENABLED(SD_FIRMWARE_UPDATE)
+#if EITHER(EEPROM_SETTINGS, SD_FIRMWARE_UPDATE)
   void crc16(uint16_t *crc, const void * const data, uint16_t cnt);
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(G26_MESH_VALIDATION)
+#if EITHER(AUTO_BED_LEVELING_UBL, G26_MESH_VALIDATION)
   /**
    * These support functions allow the use of large bit arrays of flags that take very
    * little RAM. Currently they are limited to being 16x16 in size. Changing the declaration
@@ -53,7 +53,7 @@ inline void serial_delay(const millis_t ms) {
   FORCE_INLINE bool is_bitmap_set(uint16_t bits[16], const uint8_t x, const uint8_t y) { return TEST(bits[y], x); }
 #endif
 
-#if ENABLED(ULTRA_LCD) || ENABLED(DEBUG_LEVELING_FEATURE) || ENABLED(EXTENSIBLE_UI)
+#if ANY(ULTRA_LCD, DEBUG_LEVELING_FEATURE, EXTENSIBLE_UI)
 
   // Convert uint8_t to string with 123 format
   char* ui8tostr3(const uint8_t x);

Marlin/src/feature/bedlevel/bedlevel.cpp

@@ -27,7 +27,7 @@
 #include "bedlevel.h"
 #include "../../module/planner.h"
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(PROBE_MANUALLY)
+#if EITHER(MESH_BED_LEVELING, PROBE_MANUALLY)
   #include "../../module/motion.h"
 #endif
 
@@ -146,7 +146,7 @@ void reset_bed_level() {
   #endif
 }
 
-#if ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(MESH_BED_LEVELING)
+#if EITHER(AUTO_BED_LEVELING_BILINEAR, MESH_BED_LEVELING)
 
   /**
    * Enable to produce output in JSON format suitable
@@ -215,7 +215,7 @@ void reset_bed_level() {
 
 #endif // AUTO_BED_LEVELING_BILINEAR || MESH_BED_LEVELING
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(PROBE_MANUALLY)
+#if EITHER(MESH_BED_LEVELING, PROBE_MANUALLY)
 
   void _manual_goto_xy(const float &rx, const float &ry) {
 

Marlin/src/feature/bedlevel/bedlevel.h

@@ -48,7 +48,7 @@ void reset_bed_level();
   void set_z_fade_height(const float zfh, const bool do_report=true);
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(MESH_BED_LEVELING)
+#if EITHER(AUTO_BED_LEVELING_BILINEAR, MESH_BED_LEVELING)
 
   #include <stdint.h>
 
@@ -61,7 +61,7 @@ void reset_bed_level();
 
 #endif
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(PROBE_MANUALLY)
+#if EITHER(MESH_BED_LEVELING, PROBE_MANUALLY)
   void _manual_goto_xy(const float &x, const float &y);
 #endif
 

Marlin/src/feature/digipot/digipot_mcp4018.cpp

@@ -22,7 +22,7 @@
 
 #include "../../inc/MarlinConfig.h"
 
-#if ENABLED(DIGIPOT_I2C) && ENABLED(DIGIPOT_MCP4018)
+#if BOTH(DIGIPOT_I2C, DIGIPOT_MCP4018)
 
 #include "../../core/enum.h"
 #include "Stream.h"

Marlin/src/feature/leds/leds.cpp

@@ -52,7 +52,7 @@
   );
 #endif
 
-#if ENABLED(LED_CONTROL_MENU) || ENABLED(PRINTER_EVENT_LEDS)
+#if EITHER(LED_CONTROL_MENU, PRINTER_EVENT_LEDS)
   LEDColor LEDLights::color;
   bool LEDLights::lights_on;
 #endif
@@ -60,7 +60,7 @@
 LEDLights leds;
 
 void LEDLights::setup() {
-  #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+  #if EITHER(RGB_LED, RGBW_LED)
     if (PWM_PIN(RGB_LED_R_PIN)) SET_PWM(RGB_LED_R_PIN); else SET_OUTPUT(RGB_LED_R_PIN);
     if (PWM_PIN(RGB_LED_G_PIN)) SET_PWM(RGB_LED_G_PIN); else SET_OUTPUT(RGB_LED_G_PIN);
     if (PWM_PIN(RGB_LED_B_PIN)) SET_PWM(RGB_LED_B_PIN); else SET_OUTPUT(RGB_LED_B_PIN);
@@ -108,7 +108,7 @@ void LEDLights::set_color(const LEDColor &incol
 
   #endif
 
-  #if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+  #if EITHER(RGB_LED, RGBW_LED)
 
     // This variant uses 3-4 separate pins for the RGB(W) components.
     // If the pins can do PWM then their intensity will be set.
@@ -131,7 +131,7 @@ void LEDLights::set_color(const LEDColor &incol
     RGBsetColor(incol.r, incol.g, incol.b, true);
   #endif
 
-  #if ENABLED(LED_CONTROL_MENU) || ENABLED(PRINTER_EVENT_LEDS)
+  #if EITHER(LED_CONTROL_MENU, PRINTER_EVENT_LEDS)
     // Don't update the color when OFF
     lights_on = !incol.is_off();
     if (lights_on) color = incol;

Marlin/src/feature/leds/leds.h

@@ -33,7 +33,7 @@
   #include "neopixel.h"
 #endif
 
-#define HAS_WHITE_LED (ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_LED))
+#define HAS_WHITE_LED EITHER(RGBW_LED, NEOPIXEL_LED)
 
 /**
  * LEDcolor type for use with leds.set_color
@@ -183,7 +183,7 @@ public:
     static inline LEDColor get_color() { return lights_on ? color : LEDColorOff(); }
   #endif
 
-  #if ENABLED(LED_CONTROL_MENU) || ENABLED(PRINTER_EVENT_LEDS)
+  #if EITHER(LED_CONTROL_MENU, PRINTER_EVENT_LEDS)
     static LEDColor color; // last non-off color
     static bool lights_on; // the last set color was "on"
   #endif

Marlin/src/feature/power.cpp

@@ -46,7 +46,7 @@ bool Power::is_power_needed() {
     HOTEND_LOOP() if (thermalManager.autofan_speed[e]) return true;
   #endif
 
-  #if ENABLED(AUTO_POWER_CONTROLLERFAN) && HAS_CONTROLLER_FAN && ENABLED(USE_CONTROLLER_FAN)
+  #if ENABLED(AUTO_POWER_CONTROLLERFAN, USE_CONTROLLER_FAN) && HAS_CONTROLLER_FAN
     if (controllerfan_speed) return true;
   #endif
 

Marlin/src/feature/solenoid.cpp

@@ -22,7 +22,7 @@
 
 #include "../inc/MarlinConfig.h"
 
-#if ENABLED(EXT_SOLENOID) || ENABLED(MANUAL_SOLENOID_CONTROL)
+#if EITHER(EXT_SOLENOID, MANUAL_SOLENOID_CONTROL)
 
 #include "solenoid.h"
 
@@ -95,4 +95,4 @@ void disable_all_solenoids() {
   #endif
 }
 
-#endif // EXT_SOLENOID
+#endif // EXT_SOLENOID || MANUAL_SOLENOID_CONTROL

Marlin/src/gcode/bedlevel/abl/G29.cpp

@@ -36,7 +36,7 @@
 #include "../../../module/probe.h"
 #include "../../queue.h"
 
-#if ENABLED(LCD_BED_LEVELING) && ENABLED(PROBE_MANUALLY)
+#if BOTH(LCD_BED_LEVELING, PROBE_MANUALLY)
   #include "../../../lcd/ultralcd.h"
 #endif
 
@@ -151,7 +151,7 @@
  */
 G29_TYPE GcodeSuite::G29() {
 
-  #if ENABLED(DEBUG_LEVELING_FEATURE) || ENABLED(PROBE_MANUALLY)
+  #if EITHER(DEBUG_LEVELING_FEATURE, PROBE_MANUALLY)
     const bool seenQ = parser.seen('Q');
   #else
     constexpr bool seenQ = false;
@@ -205,7 +205,7 @@ G29_TYPE GcodeSuite::G29() {
   ABL_VAR float xProbe, yProbe, measured_z;
   ABL_VAR bool dryrun, abl_should_enable;
 
-  #if ENABLED(PROBE_MANUALLY) || ENABLED(AUTO_BED_LEVELING_LINEAR)
+  #if EITHER(PROBE_MANUALLY, AUTO_BED_LEVELING_LINEAR)
     ABL_VAR int abl_probe_index;
   #endif
 
@@ -280,7 +280,7 @@ G29_TYPE GcodeSuite::G29() {
       if (active_extruder != 0) tool_change(0);
     #endif
 
-    #if ENABLED(PROBE_MANUALLY) || ENABLED(AUTO_BED_LEVELING_LINEAR)
+    #if EITHER(PROBE_MANUALLY, AUTO_BED_LEVELING_LINEAR)
       abl_probe_index = -1;
     #endif
 
@@ -522,7 +522,7 @@ G29_TYPE GcodeSuite::G29() {
     }
     else {
 
-      #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_3POINT)
+      #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_3POINT)
         const uint16_t index = abl_probe_index - 1;
       #endif
 

Marlin/src/gcode/calibrate/G28.cpp

@@ -400,7 +400,7 @@ void GcodeSuite::G28(const bool always_home_all) {
 
   endstops.not_homing();
 
-  #if ENABLED(DELTA) && ENABLED(DELTA_HOME_TO_SAFE_ZONE)
+  #if BOTH(DELTA, DELTA_HOME_TO_SAFE_ZONE)
     // move to a height where we can use the full xy-area
     do_blocking_move_to_z(delta_clip_start_height);
   #endif

Marlin/src/gcode/calibrate/G425.cpp

@@ -52,8 +52,8 @@
   #define CALIBRATION_MEASUREMENT_CERTAIN   0.5 // mm
 #endif
 
-#define HAS_X_CENTER (ENABLED(CALIBRATION_MEASURE_LEFT)  && ENABLED(CALIBRATION_MEASURE_RIGHT))
+#define HAS_X_CENTER BOTH(CALIBRATION_MEASURE_LEFT, CALIBRATION_MEASURE_RIGHT)
-#define HAS_Y_CENTER (ENABLED(CALIBRATION_MEASURE_FRONT) && ENABLED(CALIBRATION_MEASURE_BACK))
+#define HAS_Y_CENTER BOTH(CALIBRATION_MEASURE_FRONT, CALIBRATION_MEASURE_BACK)
 
 #if ENABLED(BACKLASH_GCODE)
   extern float backlash_distance_mm[], backlash_correction, backlash_smoothing_mm;

Marlin/src/gcode/control/M17_M18_M84.cpp

@@ -25,7 +25,7 @@
 #include "../../lcd/ultralcd.h"
 #include "../../module/stepper.h"
 
-#if ENABLED(AUTO_BED_LEVELING_UBL) && ENABLED(ULTRA_LCD)
+#if BOTH(AUTO_BED_LEVELING_UBL, ULTRA_LCD)
   #include "../../feature/bedlevel/bedlevel.h"
 #endif
 

Marlin/src/gcode/control/M380_M381.cpp

@@ -22,7 +22,7 @@
 
 #include "../../inc/MarlinConfig.h"
 
-#if ENABLED(EXT_SOLENOID) || ENABLED(MANUAL_SOLENOID_CONTROL)
+#if EITHER(EXT_SOLENOID, MANUAL_SOLENOID_CONTROL)
 
 #include "../gcode.h"
 #include "../../feature/solenoid.h"

Marlin/src/gcode/feature/digipot/M907-M910.cpp

@@ -22,7 +22,7 @@
 
 #include "../../../inc/MarlinConfig.h"
 
-#if HAS_DIGIPOTSS || HAS_MOTOR_CURRENT_PWM || ENABLED(DIGIPOT_I2C) || ENABLED(DAC_STEPPER_CURRENT)
+#if HAS_DIGIPOTSS || HAS_MOTOR_CURRENT_PWM || EITHER(DIGIPOT_I2C, DAC_STEPPER_CURRENT)
 
 #include "../../gcode.h"
 
@@ -50,7 +50,7 @@ void GcodeSuite::M907() {
 
   #elif HAS_MOTOR_CURRENT_PWM
 
-    #if PIN_EXISTS(MOTOR_CURRENT_PWM_X) || PIN_EXISTS(MOTOR_CURRENT_PWM_Y) || PIN_EXISTS(MOTOR_CURRENT_PWM_XY)
+    #if ANY_PIN(MOTOR_CURRENT_PWM_X, MOTOR_CURRENT_PWM_Y, MOTOR_CURRENT_PWM_XY)
       if (parser.seenval('X') || parser.seenval('Y')) stepper.digipot_current(0, parser.value_int());
     #endif
     #if PIN_EXISTS(MOTOR_CURRENT_PWM_Z)

Marlin/src/gcode/gcode.cpp

@@ -117,7 +117,7 @@ void GcodeSuite::get_destination_from_command() {
   #endif
 
   // Get ABCDHI mixing factors
-  #if ENABLED(MIXING_EXTRUDER) && ENABLED(DIRECT_MIXING_IN_G1)
+  #if BOTH(MIXING_EXTRUDER, DIRECT_MIXING_IN_G1)
     M165();
   #endif
 }
@@ -330,7 +330,7 @@ void GcodeSuite::process_parsed_command(
           case 33: M33(); break;                                  // M33: Get the long full path to a file or folder
         #endif
 
-        #if ENABLED(SDCARD_SORT_ALPHA) && ENABLED(SDSORT_GCODE)
+        #if BOTH(SDCARD_SORT_ALPHA, SDSORT_GCODE)
           case 34: M34(); break;                                  // M34: Set SD card sorting options
         #endif
 
@@ -494,7 +494,7 @@ void GcodeSuite::process_parsed_command(
         case 665: M665(); break;                                  // M665: Set delta configurations
       #endif
 
-      #if ENABLED(DELTA) || ENABLED(X_DUAL_ENDSTOPS) || ENABLED(Y_DUAL_ENDSTOPS) || ENABLED(Z_DUAL_ENDSTOPS)
+      #if ANY(DELTA, X_DUAL_ENDSTOPS, Y_DUAL_ENDSTOPS, Z_DUAL_ENDSTOPS)
         case 666: M666(); break;                                  // M666: Set delta or dual endstop adjustment
       #endif
 
@@ -576,7 +576,7 @@ void GcodeSuite::process_parsed_command(
         case 364: if (M364()) return; break;                      // M364: SCARA Psi pos3 (90 deg to Theta)
       #endif
 
-      #if ENABLED(EXT_SOLENOID) || ENABLED(MANUAL_SOLENOID_CONTROL)
+      #if EITHER(EXT_SOLENOID, MANUAL_SOLENOID_CONTROL)
         case 380: M380(); break;                                  // M380: Activate solenoid on active (or specified) extruder
         case 381: M381(); break;                                  // M381: Disable all solenoids or, if MANUAL_SOLENOID_CONTROL, active (or specified) solenoid
       #endif
@@ -673,7 +673,7 @@ void GcodeSuite::process_parsed_command(
         case 900: M900(); break;                                  // M900: Set advance K factor.
       #endif
 
-      #if HAS_DIGIPOTSS || HAS_MOTOR_CURRENT_PWM || ENABLED(DIGIPOT_I2C) || ENABLED(DAC_STEPPER_CURRENT)
+      #if HAS_DIGIPOTSS || HAS_MOTOR_CURRENT_PWM || EITHER(DIGIPOT_I2C, DAC_STEPPER_CURRENT)
         case 907: M907(); break;                                  // M907: Set digital trimpot motor current using axis codes.
         #if HAS_DIGIPOTSS || ENABLED(DAC_STEPPER_CURRENT)
           case 908: M908(); break;                                // M908: Control digital trimpot directly.

Marlin/src/gcode/gcode.h

@@ -144,7 +144,7 @@
  * M140 - Set bed target temp. S<temp>
  * M145 - Set heatup values for materials on the LCD. H<hotend> B<bed> F<fan speed> for S<material> (0=PLA, 1=ABS)
  * M149 - Set temperature units. (Requires TEMPERATURE_UNITS_SUPPORT)
- * M150 - Set Status LED Color as R<red> U<green> B<blue> P<bright>. Values 0-255. (Requires BLINKM, RGB_LED, RGBW_LED, NEOPIXEL_LED, or PCA9632).
+ * M150 - Set Status LED Color as R<red> U<green> B<blue> P<bright>. Values 0-255. (Requires BLINKM, RGB_LED, RGBW_LED, NEOPIXEL_LED, PCA9533, or PCA9632).
  * M155 - Auto-report temperatures with interval of S<seconds>. (Requires AUTO_REPORT_TEMPERATURES)
  * M163 - Set a single proportion for a mixing extruder. (Requires MIXING_EXTRUDER)
  * M164 - Commit the mix and save to a virtual tool (current, or as specified by 'S'). (Requires MIXING_EXTRUDER)
@@ -480,7 +480,7 @@ private:
     #if ENABLED(LONG_FILENAME_HOST_SUPPORT)
       static void M33();
     #endif
-    #if ENABLED(SDCARD_SORT_ALPHA) && ENABLED(SDSORT_GCODE)
+    #if BOTH(SDCARD_SORT_ALPHA, SDSORT_GCODE)
       static void M34();
     #endif
   #endif
@@ -706,7 +706,7 @@ private:
     static bool M364();
   #endif
 
-  #if ENABLED(EXT_SOLENOID) || ENABLED(MANUAL_SOLENOID_CONTROL)
+  #if EITHER(EXT_SOLENOID, MANUAL_SOLENOID_CONTROL)
     static void M380();
     static void M381();
   #endif
@@ -845,7 +845,7 @@ private:
     static void M918();
   #endif
 
-  #if HAS_DIGIPOTSS || HAS_MOTOR_CURRENT_PWM || ENABLED(DIGIPOT_I2C) || ENABLED(DAC_STEPPER_CURRENT)
+  #if HAS_DIGIPOTSS || HAS_MOTOR_CURRENT_PWM || EITHER(DIGIPOT_I2C, DAC_STEPPER_CURRENT)
     static void M907();
     #if HAS_DIGIPOTSS || ENABLED(DAC_STEPPER_CURRENT)
       static void M908();

Marlin/src/gcode/host/M115.cpp

@@ -152,7 +152,7 @@ void GcodeSuite::M115() {
 
     // THERMAL_PROTECTION
     cap_line(PSTR("THERMAL_PROTECTION")
-      #if ENABLED(THERMAL_PROTECTION_HOTENDS) && ENABLED(THERMAL_PROTECTION_BED)
+      #if BOTH(THERMAL_PROTECTION_HOTENDS, THERMAL_PROTECTION_BED)
         , true
       #endif
     );

Marlin/src/gcode/lcd/M73.cpp

@@ -22,7 +22,7 @@
 
 #include "../../inc/MarlinConfig.h"
 
-#if ENABLED(LCD_SET_PROGRESS_MANUALLY) && (ENABLED(EXTENSIBLE_UI) || ENABLED(ULTRA_LCD))
+#if ENABLED(LCD_SET_PROGRESS_MANUALLY) && EITHER(EXTENSIBLE_UI, ULTRA_LCD)
 
 #include "../gcode.h"
 #include "../../lcd/ultralcd.h"
@@ -42,4 +42,4 @@ void GcodeSuite::M73() {
     ui.set_progress(parser.value_byte());
 }
 
-#endif // LCD_SET_PROGRESS_MANUALLY && (ENABLED(EXTENSIBLE_UI) || ENABLED(ULTRA_LCD))
+#endif // LCD_SET_PROGRESS_MANUALLY && (EXTENSIBLE_UI || ULTRA_LCD)

Marlin/src/gcode/motion/G0_G1.cpp

@@ -25,7 +25,7 @@
 
 #include "../../Marlin.h"
 
-#if ENABLED(FWRETRACT) && ENABLED(FWRETRACT_AUTORETRACT)
+#if BOTH(FWRETRACT, FWRETRACT_AUTORETRACT)
   #include "../../feature/fwretract.h"
 #endif
 
@@ -79,7 +79,7 @@ void GcodeSuite::G0_G1(
       }
     #endif
 
-    #if ENABLED(FWRETRACT) && ENABLED(FWRETRACT_AUTORETRACT)
+    #if BOTH(FWRETRACT, FWRETRACT_AUTORETRACT)
 
       if (MIN_AUTORETRACT <= MAX_AUTORETRACT) {
         // When M209 Autoretract is enabled, convert E-only moves to firmware retract/recover moves

Marlin/src/gcode/queue.h

@@ -95,7 +95,7 @@ void enqueue_and_echo_commands_P(PGM_P const pgcode);
  */
 bool enqueue_and_echo_command(const char* cmd);
 
-#define HAS_LCD_QUEUE_NOW (ENABLED(MALYAN_LCD) || (HAS_LCD_MENU && (ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(PID_AUTOTUNE_MENU) || ENABLED(ADVANCED_PAUSE_FEATURE))))
+#define HAS_LCD_QUEUE_NOW (ENABLED(MALYAN_LCD) || (HAS_LCD_MENU && ANY(AUTO_BED_LEVELING_UBL, PID_AUTOTUNE_MENU, ADVANCED_PAUSE_FEATURE)))
 #define HAS_QUEUE_NOW (ENABLED(SDSUPPORT) || HAS_LCD_QUEUE_NOW)
 
 #if HAS_QUEUE_NOW

Marlin/src/gcode/sdcard/M34.cpp

@@ -22,7 +22,7 @@
 
 #include "../../inc/MarlinConfig.h"
 
-#if ENABLED(SDCARD_SORT_ALPHA) && ENABLED(SDSORT_GCODE)
+#if BOTH(SDCARD_SORT_ALPHA, SDSORT_GCODE)
 
 #include "../gcode.h"
 #include "../../sd/cardreader.h"

Marlin/src/gcode/temperature/M104_M109.cpp

@@ -125,7 +125,7 @@ void GcodeSuite::M109() {
         print_job_timer.start();
     #endif
 
-    #if ENABLED(ULTRA_LCD) || ENABLED(EXTENSIBLE_UI)
+    #if EITHER(ULTRA_LCD, EXTENSIBLE_UI)
       if (thermalManager.isHeatingHotend(target_extruder) || !no_wait_for_cooling)
         thermalManager.set_heating_message(target_extruder);
     #endif

Marlin/src/inc/Conditionals_LCD.h

@@ -64,7 +64,7 @@
 
   #define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
 
-#elif ENABLED(miniVIKI) || ENABLED(VIKI2) || ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) || ENABLED(AZSMZ_12864)
+#elif ANY(miniVIKI, VIKI2, ELB_FULL_GRAPHIC_CONTROLLER, AZSMZ_12864)
 
   #define ULTRA_LCD
   #define DOGLCD
@@ -141,7 +141,7 @@
 
 #endif
 
-#if ENABLED(MAKRPANEL) || ENABLED(MINIPANEL)
+#if EITHER(MAKRPANEL, MINIPANEL)
   #define DOGLCD
   #define ULTIPANEL
   #define DEFAULT_LCD_CONTRAST 17
@@ -159,13 +159,13 @@
 #endif
 
 // 128x64 I2C OLED LCDs - SSD1306/SSD1309/SH1106
-#define HAS_SSD1306_OLED_I2C (ENABLED(U8GLIB_SSD1306) || ENABLED(U8GLIB_SSD1309) || ENABLED(U8GLIB_SH1106))
+#define HAS_SSD1306_OLED_I2C ANY(U8GLIB_SSD1306, U8GLIB_SSD1309, U8GLIB_SH1106)
 #if HAS_SSD1306_OLED_I2C
   #define ULTRA_LCD
   #define DOGLCD
 #endif
 
-#if ENABLED(PANEL_ONE) || ENABLED(U8GLIB_SH1106)
+#if EITHER(PANEL_ONE, U8GLIB_SH1106)
 
   #define ULTIMAKERCONTROLLER
 
@@ -177,17 +177,13 @@
 
 #endif
 
-#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) || ENABLED(LCD_FOR_MELZI) || ENABLED(SILVER_GATE_GLCD_CONTROLLER)
+#if ANY(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER, LCD_FOR_MELZI, SILVER_GATE_GLCD_CONTROLLER)
   #define DOGLCD
   #define U8GLIB_ST7920
   #define REPRAP_DISCOUNT_SMART_CONTROLLER
 #endif
 
-#if ENABLED(ULTIMAKERCONTROLLER)              \
+#if ANY(ULTIMAKERCONTROLLER, REPRAP_DISCOUNT_SMART_CONTROLLER, G3D_PANEL, RIGIDBOT_PANEL, ULTI_CONTROLLER)
- || ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) \
- || ENABLED(G3D_PANEL)                        \
- || ENABLED(RIGIDBOT_PANEL)                   \
- || ENABLED(ULTI_CONTROLLER)
   #define ULTIPANEL
 #endif
 
@@ -223,7 +219,7 @@
  * I2C PANELS
  */
 
-#if ENABLED(LCD_SAINSMART_I2C_1602) || ENABLED(LCD_SAINSMART_I2C_2004)
+#if EITHER(LCD_SAINSMART_I2C_1602, LCD_SAINSMART_I2C_2004)
 
   #define LCD_I2C_TYPE_PCF8575
   #define LCD_I2C_ADDRESS 0x27   // I2C Address of the port expander
@@ -267,15 +263,11 @@
   #define STD_ENCODER_PULSES_PER_STEP 2
   #define STD_ENCODER_STEPS_PER_MENU_ITEM 1
 
-#elif ENABLED(miniVIKI) || ENABLED(VIKI2) \
+#elif ANY(miniVIKI, VIKI2, ELB_FULL_GRAPHIC_CONTROLLER, AZSMZ_12864, OLED_PANEL_TINYBOY2, BQ_LCD_SMART_CONTROLLER, LCD_I2C_PANELOLU2, REPRAP_DISCOUNT_SMART_CONTROLLER)
-   || ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) \
+
-   || ENABLED(AZSMZ_12864) \
-   || ENABLED(OLED_PANEL_TINYBOY2) \
-   || ENABLED(BQ_LCD_SMART_CONTROLLER) \
-   || ENABLED(LCD_I2C_PANELOLU2) \
-   || ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
   #define STD_ENCODER_PULSES_PER_STEP 4
   #define STD_ENCODER_STEPS_PER_MENU_ITEM 1
+
 #endif
 
 #ifndef STD_ENCODER_PULSES_PER_STEP
@@ -400,16 +392,16 @@
 #endif
 
 // No inactive extruders with MK2_MULTIPLEXER or SWITCHING_NOZZLE
-#if ENABLED(MK2_MULTIPLEXER) || ENABLED(SWITCHING_NOZZLE)
+#if EITHER(MK2_MULTIPLEXER, SWITCHING_NOZZLE)
   #undef DISABLE_INACTIVE_EXTRUDER
 #endif
 
 // Prusa MK2 Multiplexer and MMU 2.0 force SINGLENOZZLE
-#if ENABLED(MK2_MULTIPLEXER) || ENABLED(PRUSA_MMU2)
+#if EITHER(MK2_MULTIPLEXER, PRUSA_MMU2)
   #define SINGLENOZZLE
 #endif
 
-#if ENABLED(SINGLENOZZLE) || ENABLED(MIXING_EXTRUDER)         // One hotend, one thermistor, no XY offset
+#if EITHER(SINGLENOZZLE, MIXING_EXTRUDER)         // One hotend, one thermistor, no XY offset
   #undef HOTENDS
   #define HOTENDS       1
   #undef TEMP_SENSOR_1_AS_REDUNDANT
@@ -435,7 +427,7 @@
 #define SWITCHING_NOZZLE_TWO_SERVOS defined(SWITCHING_NOZZLE_E1_SERVO_NR)
 
 #define HAS_HOTEND_OFFSET (HOTENDS > 1)
-#define HAS_DUPLICATION_MODE (ENABLED(DUAL_X_CARRIAGE) || ENABLED(MULTI_NOZZLE_DUPLICATION))
+#define HAS_DUPLICATION_MODE EITHER(DUAL_X_CARRIAGE, MULTI_NOZZLE_DUPLICATION)
 
 /**
  * DISTINCT_E_FACTORS affects how some E factors are accessed
@@ -506,8 +498,8 @@
 /**
  * Set flags for enabled probes
  */
-#define HAS_BED_PROBE (ENABLED(FIX_MOUNTED_PROBE) || ENABLED(Z_PROBE_ALLEN_KEY) || HAS_Z_SERVO_PROBE || ENABLED(Z_PROBE_SLED) || ENABLED(SOLENOID_PROBE) || ENABLED(SENSORLESS_PROBING) || ENABLED(RACK_AND_PINION_PROBE))
+#define HAS_BED_PROBE (HAS_Z_SERVO_PROBE || ANY(FIX_MOUNTED_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, SOLENOID_PROBE, SENSORLESS_PROBING, RACK_AND_PINION_PROBE))
-#define PROBE_SELECTED (HAS_BED_PROBE || ENABLED(PROBE_MANUALLY) || ENABLED(MESH_BED_LEVELING))
+#define PROBE_SELECTED (HAS_BED_PROBE || EITHER(PROBE_MANUALLY, MESH_BED_LEVELING))
 
 #if HAS_BED_PROBE
   #define USES_Z_MIN_PROBE_ENDSTOP DISABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
@@ -528,19 +520,19 @@
   #define GRID_MAX_POINTS ((GRID_MAX_POINTS_X) * (GRID_MAX_POINTS_Y))
 #endif
 
-#define HAS_SOFTWARE_ENDSTOPS (ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS))
+#define HAS_SOFTWARE_ENDSTOPS EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
-#define HAS_RESUME_CONTINUE (ENABLED(EXTENSIBLE_UI) || ENABLED(NEWPANEL) || ENABLED(EMERGENCY_PARSER))
+#define HAS_RESUME_CONTINUE   ANY(EXTENSIBLE_UI, NEWPANEL, EMERGENCY_PARSER)
-#define HAS_COLOR_LEDS (ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533) || ENABLED(NEOPIXEL_LED))
+#define HAS_COLOR_LEDS        ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
-#define HAS_LEDS_OFF_FLAG (ENABLED(PRINTER_EVENT_LEDS) && ENABLED(SDSUPPORT) && HAS_RESUME_CONTINUE)
+#define HAS_LEDS_OFF_FLAG     (BOTH(PRINTER_EVENT_LEDS, SDSUPPORT) && HAS_RESUME_CONTINUE)
-#define HAS_PRINT_PROGRESS (ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY))
+#define HAS_PRINT_PROGRESS    EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY)
 #define HAS_SERVICE_INTERVALS (SERVICE_INTERVAL_1 > 0 || SERVICE_INTERVAL_2 > 0 || SERVICE_INTERVAL_3 > 0)
-#define HAS_FILAMENT_SENSOR ENABLED(FILAMENT_RUNOUT_SENSOR)
+#define HAS_FILAMENT_SENSOR   ENABLED(FILAMENT_RUNOUT_SENSOR)
 
-#define Z_MULTI_STEPPER_DRIVERS (ENABLED(Z_DUAL_STEPPER_DRIVERS) || ENABLED(Z_TRIPLE_STEPPER_DRIVERS))
+#define Z_MULTI_STEPPER_DRIVERS EITHER(Z_DUAL_STEPPER_DRIVERS, Z_TRIPLE_STEPPER_DRIVERS)
-#define Z_MULTI_ENDSTOPS (ENABLED(Z_DUAL_ENDSTOPS) || ENABLED(Z_TRIPLE_ENDSTOPS))
+#define Z_MULTI_ENDSTOPS EITHER(Z_DUAL_ENDSTOPS, Z_TRIPLE_ENDSTOPS)
-#define HAS_EXTRA_ENDSTOPS (ENABLED(X_DUAL_ENDSTOPS) || ENABLED(Y_DUAL_ENDSTOPS) || Z_MULTI_ENDSTOPS)
+#define HAS_EXTRA_ENDSTOPS (EITHER(X_DUAL_ENDSTOPS, Y_DUAL_ENDSTOPS) || Z_MULTI_ENDSTOPS)
 
-#define IS_SCARA     (ENABLED(MORGAN_SCARA) || ENABLED(MAKERARM_SCARA))
+#define IS_SCARA     EITHER(MORGAN_SCARA, MAKERARM_SCARA)
 #define IS_KINEMATIC (ENABLED(DELTA) || IS_SCARA)
 #define IS_CARTESIAN !IS_KINEMATIC
 

Marlin/src/inc/Conditionals_post.h

@@ -106,9 +106,9 @@
 /**
  * CoreXY, CoreXZ, and CoreYZ - and their reverse
  */
-#define CORE_IS_XY (ENABLED(COREXY) || ENABLED(COREYX))
+#define CORE_IS_XY EITHER(COREXY, COREYX)
-#define CORE_IS_XZ (ENABLED(COREXZ) || ENABLED(COREZX))
+#define CORE_IS_XZ EITHER(COREXZ, COREZX)
-#define CORE_IS_YZ (ENABLED(COREYZ) || ENABLED(COREZY))
+#define CORE_IS_YZ EITHER(COREYZ, COREZY)
 #define IS_CORE (CORE_IS_XY || CORE_IS_XZ || CORE_IS_YZ)
 #if IS_CORE
   #if CORE_IS_XY
@@ -124,7 +124,7 @@
     #define CORE_AXIS_1 B_AXIS
     #define CORE_AXIS_2 C_AXIS
   #endif
-  #if ENABLED(COREYX) || ENABLED(COREZX) || ENABLED(COREZY)
+  #if ANY(COREYX, COREZX, COREZY)
     #define CORESIGN(n) (-(n))
   #else
     #define CORESIGN(n) (n)
@@ -426,7 +426,7 @@
   #define HEATER_CHAMBER_USES_THERMISTOR
 #endif
 
-#define HOTEND_USES_THERMISTOR (ENABLED(HEATER_0_USES_THERMISTOR) || ENABLED(HEATER_1_USES_THERMISTOR) || ENABLED(HEATER_2_USES_THERMISTOR) || ENABLED(HEATER_3_USES_THERMISTOR) || ENABLED(HEATER_4_USES_THERMISTOR))
+#define HOTEND_USES_THERMISTOR ANY(HEATER_0_USES_THERMISTOR, HEATER_1_USES_THERMISTOR, HEATER_2_USES_THERMISTOR, HEATER_3_USES_THERMISTOR, HEATER_4_USES_THERMISTOR)
 
 /**
  * Default hotend offsets, if not defined
@@ -877,8 +877,8 @@
   #define AXIS_HAS_STALLGUARD(ST)  (AXIS_DRIVER_TYPE(ST, TMC2130) || AXIS_DRIVER_TYPE(ST, TMC2160) || AXIS_DRIVER_TYPE(ST, TMC2660) || AXIS_DRIVER_TYPE(ST, TMC5130) || AXIS_DRIVER_TYPE(ST, TMC5160))
   #define AXIS_HAS_STEALTHCHOP(ST) (AXIS_DRIVER_TYPE(ST, TMC2130) || AXIS_DRIVER_TYPE(ST, TMC2160) || AXIS_DRIVER_TYPE(ST, TMC2208) || AXIS_DRIVER_TYPE(ST, TMC5130) || AXIS_DRIVER_TYPE(ST, TMC5160))
 
-  #define STEALTHCHOP_ENABLED (ENABLED(STEALTHCHOP_XY) || ENABLED(STEALTHCHOP_Z) || ENABLED(STEALTHCHOP_E))
+  #define STEALTHCHOP_ENABLED ANY(STEALTHCHOP_XY, STEALTHCHOP_Z, STEALTHCHOP_E)
-  #define USE_SENSORLESS (ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING))
+  #define USE_SENSORLESS EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
   // Disable Z axis sensorless homing if a probe is used to home the Z axis
   #if HOMING_Z_WITH_PROBE
     #undef Z_STALL_SENSITIVITY
@@ -940,8 +940,8 @@
 #if !HAS_HEATED_BED
   #undef PIDTEMPBED
 #endif
-#define HAS_PID_HEATING (ENABLED(PIDTEMP) || ENABLED(PIDTEMPBED))
+#define HAS_PID_HEATING EITHER(PIDTEMP, PIDTEMPBED)
-#define HAS_PID_FOR_BOTH (ENABLED(PIDTEMP) && ENABLED(PIDTEMPBED))
+#define HAS_PID_FOR_BOTH BOTH(PIDTEMP, PIDTEMPBED)
 
 // Thermal protection
 #define HAS_THERMALLY_PROTECTED_BED (HAS_HEATED_BED && ENABLED(THERMAL_PROTECTION_BED))
@@ -976,9 +976,9 @@
   #define Z_PROBE_SERVO_NR -1
 #endif
 
-#define HAS_SERVO_ANGLES (ENABLED(SWITCHING_EXTRUDER) || ENABLED(SWITCHING_NOZZLE) || (HAS_Z_SERVO_PROBE && defined(Z_PROBE_SERVO_NR)))
+#define HAS_SERVO_ANGLES (EITHER(SWITCHING_EXTRUDER, SWITCHING_NOZZLE) || (HAS_Z_SERVO_PROBE && defined(Z_PROBE_SERVO_NR)))
 
-#if !HAS_SERVO_ANGLES
+#if !HAS_SERVO_ANGLES || ENABLED(BLTOUCH)
   #undef EDITABLE_SERVO_ANGLES
 #endif
 
@@ -986,17 +986,17 @@
 #define HAS_FILAMENT_WIDTH_SENSOR (PIN_EXISTS(FILWIDTH))
 
 // User Interface
-#define HAS_HOME (PIN_EXISTS(HOME))
+#define HAS_HOME        (PIN_EXISTS(HOME))
-#define HAS_KILL (PIN_EXISTS(KILL))
+#define HAS_KILL        (PIN_EXISTS(KILL))
-#define HAS_SUICIDE (PIN_EXISTS(SUICIDE))
+#define HAS_SUICIDE     (PIN_EXISTS(SUICIDE))
-#define HAS_PHOTOGRAPH (PIN_EXISTS(PHOTOGRAPH))
+#define HAS_PHOTOGRAPH  (PIN_EXISTS(PHOTOGRAPH))
-#define HAS_BUZZER (PIN_EXISTS(BEEPER) || ENABLED(LCD_USE_I2C_BUZZER))
+#define HAS_BUZZER      (PIN_EXISTS(BEEPER) || ENABLED(LCD_USE_I2C_BUZZER))
-#define HAS_CASE_LIGHT (PIN_EXISTS(CASE_LIGHT) && ENABLED(CASE_LIGHT_ENABLE))
+#define HAS_CASE_LIGHT  (PIN_EXISTS(CASE_LIGHT) && ENABLED(CASE_LIGHT_ENABLE))
 
 // Digital control
-#define HAS_STEPPER_RESET (PIN_EXISTS(STEPPER_RESET))
+#define HAS_STEPPER_RESET     (PIN_EXISTS(STEPPER_RESET))
-#define HAS_DIGIPOTSS (PIN_EXISTS(DIGIPOTSS))
+#define HAS_DIGIPOTSS         (PIN_EXISTS(DIGIPOTSS))
-#define HAS_MOTOR_CURRENT_PWM (PIN_EXISTS(MOTOR_CURRENT_PWM_X) || PIN_EXISTS(MOTOR_CURRENT_PWM_Y) || PIN_EXISTS(MOTOR_CURRENT_PWM_XY) || PIN_EXISTS(MOTOR_CURRENT_PWM_Z) || PIN_EXISTS(MOTOR_CURRENT_PWM_E))
+#define HAS_MOTOR_CURRENT_PWM ANY_PIN(MOTOR_CURRENT_PWM_X, MOTOR_CURRENT_PWM_Y, MOTOR_CURRENT_PWM_XY, MOTOR_CURRENT_PWM_Z, MOTOR_CURRENT_PWM_E)
 
 #define HAS_MICROSTEPS (HAS_X_MICROSTEPS || HAS_X2_MICROSTEPS || HAS_Y_MICROSTEPS || HAS_Y2_MICROSTEPS || HAS_Z_MICROSTEPS || HAS_Z2_MICROSTEPS || HAS_Z3_MICROSTEPS || HAS_E0_MICROSTEPS || HAS_E1_MICROSTEPS || HAS_E2_MICROSTEPS || HAS_E3_MICROSTEPS || HAS_E4_MICROSTEPS || HAS_E5_MICROSTEPS)
 
@@ -1055,7 +1055,7 @@
   #undef AUTO_REPORT_TEMPERATURES
 #endif
 
-#define HAS_AUTO_REPORTING (ENABLED(AUTO_REPORT_TEMPERATURES) || ENABLED(AUTO_REPORT_SD_STATUS))
+#define HAS_AUTO_REPORTING EITHER(AUTO_REPORT_TEMPERATURES, AUTO_REPORT_SD_STATUS)
 
 /**
  * This setting is also used by M109 when trying to calculate
@@ -1272,14 +1272,14 @@
 /**
  * Set granular options based on the specific type of leveling
  */
-#define UBL_SEGMENTED   (ENABLED(AUTO_BED_LEVELING_UBL) && (ENABLED(DELTA)))
+#define UBL_SEGMENTED   BOTH(AUTO_BED_LEVELING_UBL, DELTA)
-#define ABL_PLANAR      (ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_3POINT))
+#define ABL_PLANAR      EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_3POINT)
-#define ABL_GRID        (ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR))
+#define ABL_GRID        EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 #define HAS_ABL_NOT_UBL (ABL_PLANAR || ABL_GRID)
 #define HAS_ABL_OR_UBL  (HAS_ABL_NOT_UBL || ENABLED(AUTO_BED_LEVELING_UBL))
 #define HAS_LEVELING    (HAS_ABL_OR_UBL || ENABLED(MESH_BED_LEVELING))
 #define HAS_AUTOLEVEL   (HAS_ABL_OR_UBL && DISABLED(PROBE_MANUALLY))
-#define HAS_MESH        (ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(MESH_BED_LEVELING))
+#define HAS_MESH        ANY(AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL, MESH_BED_LEVELING)
 #define PLANNER_LEVELING      (HAS_LEVELING && DISABLED(AUTO_BED_LEVELING_UBL))
 #define HAS_PROBING_PROCEDURE (HAS_ABL_OR_UBL || ENABLED(Z_MIN_PROBE_REPEATABILITY_TEST))
 #define HAS_POSITION_MODIFIERS (ENABLED(FWRETRACT) || HAS_LEVELING || ENABLED(SKEW_CORRECTION))
@@ -1297,8 +1297,8 @@
   #undef NO_FAN_SLOWING_IN_PID_TUNING
 #endif
 
-#define QUIET_PROBING (HAS_BED_PROBE && (ENABLED(PROBING_HEATERS_OFF) || ENABLED(PROBING_FANS_OFF) || DELAY_BEFORE_PROBING > 0))
+#define QUIET_PROBING (HAS_BED_PROBE && (EITHER(PROBING_HEATERS_OFF, PROBING_FANS_OFF) || DELAY_BEFORE_PROBING > 0))
-#define HEATER_IDLE_HANDLER (ENABLED(ADVANCED_PAUSE_FEATURE) || ENABLED(PROBING_HEATERS_OFF))
+#define HEATER_IDLE_HANDLER EITHER(ADVANCED_PAUSE_FEATURE, PROBING_HEATERS_OFF)
 
 #if ENABLED(ADVANCED_PAUSE_FEATURE) && !defined(FILAMENT_CHANGE_SLOW_LOAD_LENGTH)
   #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0
@@ -1400,7 +1400,7 @@
 /**
  * Default mesh area is an area with an inset margin on the print area.
  */
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   #if IS_KINEMATIC
     // Probing points may be verified at compile time within the radius
     // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
@@ -1440,7 +1440,7 @@
 
 #endif // MESH_BED_LEVELING || AUTO_BED_LEVELING_UBL
 
-#if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(AUTO_BED_LEVELING_3POINT)
+#if EITHER(AUTO_BED_LEVELING_UBL, AUTO_BED_LEVELING_3POINT)
   #if IS_KINEMATIC
     #define SIN0    0.0
     #define SIN120  0.866025
@@ -1488,7 +1488,7 @@
   #endif
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
   #ifndef LEFT_PROBE_BED_POSITION
     #define LEFT_PROBE_BED_POSITION MIN_PROBE_X
   #endif
@@ -1582,7 +1582,7 @@
 #endif
 
 // Add commands that need sub-codes to this list
-#define USE_GCODE_SUBCODES ENABLED(G38_PROBE_TARGET) || ENABLED(CNC_COORDINATE_SYSTEMS) || ENABLED(POWER_LOSS_RECOVERY)
+#define USE_GCODE_SUBCODES ANY(G38_PROBE_TARGET, CNC_COORDINATE_SYSTEMS, POWER_LOSS_RECOVERY)
 
 // Parking Extruder
 #if ENABLED(PARKING_EXTRUDER)
@@ -1624,8 +1624,8 @@
   #endif
 #endif
 
-// Nozzle park
+// Nozzle park for Delta
-#if ENABLED(NOZZLE_PARK_FEATURE) && ENABLED(DELTA)
+#if BOTH(NOZZLE_PARK_FEATURE, DELTA)
   #undef NOZZLE_PARK_Z_FEEDRATE
   #define NOZZLE_PARK_Z_FEEDRATE NOZZLE_PARK_XY_FEEDRATE
 #endif
@@ -1666,7 +1666,7 @@
 // If platform requires early initialization of watchdog to properly boot
 #define EARLY_WATCHDOG (ENABLED(USE_WATCHDOG) && defined(ARDUINO_ARCH_SAM))
 
-#define USE_EXECUTE_COMMANDS_IMMEDIATE (ENABLED(G29_RETRY_AND_RECOVER) || ENABLED(GCODE_MACROS) || ENABLED(POWER_LOSS_RECOVERY) || HAS_DRIVER(L6470))
+#define USE_EXECUTE_COMMANDS_IMMEDIATE (ANY(G29_RETRY_AND_RECOVER, GCODE_MACROS, POWER_LOSS_RECOVERY) || HAS_DRIVER(L6470))
 
 #if ENABLED(Z_TRIPLE_STEPPER_DRIVERS)
   #define Z_STEPPER_COUNT 3

Marlin/src/inc/SanityCheck.h

@@ -395,7 +395,7 @@
   #elif TX_BUFFER_SIZE && (TX_BUFFER_SIZE < 2 || TX_BUFFER_SIZE > 256 || !IS_POWER_OF_2(TX_BUFFER_SIZE))
     #error "TX_BUFFER_SIZE must be 0 or a power of 2 between 1 and 256."
   #endif
-#elif ENABLED(SERIAL_XON_XOFF) || ENABLED(SERIAL_STATS_MAX_RX_QUEUED) || ENABLED(SERIAL_STATS_DROPPED_RX)
+#elif ANY(SERIAL_XON_XOFF, SERIAL_STATS_MAX_RX_QUEUED, SERIAL_STATS_DROPPED_RX)
   #error "SERIAL_XON_XOFF and SERIAL_STATS_* features not supported on USB-native AVR devices."
 #endif
 
@@ -410,7 +410,7 @@
 /**
  * Dual / Triple Stepper Drivers
  */
-#if ENABLED(X_DUAL_STEPPER_DRIVERS) && ENABLED(DUAL_X_CARRIAGE)
+#if BOTH(X_DUAL_STEPPER_DRIVERS, DUAL_X_CARRIAGE)
   #error "DUAL_X_CARRIAGE is not compatible with X_DUAL_STEPPER_DRIVERS."
 #elif ENABLED(X_DUAL_STEPPER_DRIVERS) && !(HAS_X2_ENABLE && HAS_X2_STEP && HAS_X2_DIR)
   #error "X_DUAL_STEPPER_DRIVERS requires X2 pins (and an extra E plug)."
@@ -462,21 +462,21 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
   #error "PULLDOWN pin mode is not available on the selected board."
 #endif
 
-#if ENABLED(ENDSTOPPULLUPS) && ENABLED(ENDSTOPPULLDOWNS)
+#if BOTH(ENDSTOPPULLUPS, ENDSTOPPULLDOWNS)
   #error "Enable only one of ENDSTOPPULLUPS or ENDSTOPPULLDOWNS."
-#elif ENABLED(FIL_RUNOUT_PULLUP) && ENABLED(FIL_RUNOUT_PULLDOWN)
+#elif BOTH(FIL_RUNOUT_PULLUP, FIL_RUNOUT_PULLDOWN)
   #error "Enable only one of FIL_RUNOUT_PULLUP or FIL_RUNOUT_PULLDOWN."
-#elif ENABLED(ENDSTOPPULLUP_XMAX) && ENABLED(ENDSTOPPULLDOWN_XMAX)
+#elif BOTH(ENDSTOPPULLUP_XMAX, ENDSTOPPULLDOWN_XMAX)
   #error "Enable only one of ENDSTOPPULLUP_X_MAX or ENDSTOPPULLDOWN_X_MAX."
-#elif ENABLED(ENDSTOPPULLUP_YMAX) && ENABLED(ENDSTOPPULLDOWN_YMAX)
+#elif BOTH(ENDSTOPPULLUP_YMAX, ENDSTOPPULLDOWN_YMAX)
   #error "Enable only one of ENDSTOPPULLUP_Y_MAX or ENDSTOPPULLDOWN_Y_MAX."
-#elif ENABLED(ENDSTOPPULLUP_ZMAX) && ENABLED(ENDSTOPPULLDOWN_ZMAX)
+#elif BOTH(ENDSTOPPULLUP_ZMAX, ENDSTOPPULLDOWN_ZMAX)
   #error "Enable only one of ENDSTOPPULLUP_Z_MAX or ENDSTOPPULLDOWN_Z_MAX."
-#elif ENABLED(ENDSTOPPULLUP_XMIN) && ENABLED(ENDSTOPPULLDOWN_XMIN)
+#elif BOTH(ENDSTOPPULLUP_XMIN, ENDSTOPPULLDOWN_XMIN)
   #error "Enable only one of ENDSTOPPULLUP_X_MIN or ENDSTOPPULLDOWN_X_MIN."
-#elif ENABLED(ENDSTOPPULLUP_YMIN) && ENABLED(ENDSTOPPULLDOWN_YMIN)
+#elif BOTH(ENDSTOPPULLUP_YMIN, ENDSTOPPULLDOWN_YMIN)
   #error "Enable only one of ENDSTOPPULLUP_Y_MIN or ENDSTOPPULLDOWN_Y_MIN."
-#elif ENABLED(ENDSTOPPULLUP_ZMIN) && ENABLED(ENDSTOPPULLDOWN_ZMIN)
+#elif BOTH(ENDSTOPPULLUP_ZMIN, ENDSTOPPULLDOWN_ZMIN)
   #error "Enable only one of ENDSTOPPULLUP_Z_MIN or ENDSTOPPULLDOWN_Z_MIN."
 #endif
 
@@ -513,7 +513,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
 /**
  * Custom Boot and Status screens
  */
-#if DISABLED(DOGLCD) && (ENABLED(SHOW_CUSTOM_BOOTSCREEN) || ENABLED(CUSTOM_STATUS_SCREEN_IMAGE))
+#if DISABLED(DOGLCD) && EITHER(SHOW_CUSTOM_BOOTSCREEN, CUSTOM_STATUS_SCREEN_IMAGE)
   #error "Graphical LCD is required for SHOW_CUSTOM_BOOTSCREEN and CUSTOM_STATUS_SCREEN_IMAGE."
 #endif
 
@@ -568,9 +568,9 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
 #if ENABLED(BABYSTEPPING)
   #if ENABLED(SCARA)
     #error "BABYSTEPPING is not implemented for SCARA yet."
-  #elif ENABLED(DELTA) && ENABLED(BABYSTEP_XY)
+  #elif BOTH(DELTA, BABYSTEP_XY)
     #error "BABYSTEPPING only implemented for Z axis on deltabots."
-  #elif ENABLED(BABYSTEP_ZPROBE_OFFSET) && ENABLED(MESH_BED_LEVELING)
+  #elif BOTH(BABYSTEP_ZPROBE_OFFSET, MESH_BED_LEVELING)
     #error "MESH_BED_LEVELING and BABYSTEP_ZPROBE_OFFSET is not a valid combination"
   #elif ENABLED(BABYSTEP_ZPROBE_OFFSET) && !HAS_BED_PROBE
     #error "BABYSTEP_ZPROBE_OFFSET requires a probe."
@@ -580,7 +580,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
     #error "BABYSTEP_ZPROBE_GFX_OVERLAY requires a BABYSTEP_ZPROBE_OFFSET."
   #elif ENABLED(BABYSTEP_HOTEND_Z_OFFSET) && !HAS_HOTEND_OFFSET
     #error "BABYSTEP_HOTEND_Z_OFFSET requires 2 or more HOTENDS."
-  #elif ENABLED(BABYSTEP_ALWAYS_AVAILABLE) && ENABLED(MOVE_Z_WHEN_IDLE)
+  #elif BOTH(BABYSTEP_ALWAYS_AVAILABLE, MOVE_Z_WHEN_IDLE)
     #error "BABYSTEP_ALWAYS_AVAILABLE and MOVE_Z_WHEN_IDLE are incompatible."
   #endif
 #endif
@@ -641,7 +641,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
 /**
  * Individual axis homing is useless for DELTAS
  */
-#if ENABLED(INDIVIDUAL_AXIS_HOMING_MENU) && ENABLED(DELTA)
+#if BOTH(INDIVIDUAL_AXIS_HOMING_MENU, DELTA)
   #error "INDIVIDUAL_AXIS_HOMING_MENU is incompatible with DELTA kinematics."
 #endif
 
@@ -810,7 +810,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
     #error "Enable only one of PARKING_EXTRUDER and MAGNETIC_PARKING_EXTRUDER."
   #elif EXTRUDERS != 2
     #error "PARKING_EXTRUDER requires exactly 2 EXTRUDERS."
-  #elif !PIN_EXISTS(SOL0) || !PIN_EXISTS(SOL1)
+  #elif !PIN_EXISTS(SOL0, SOL1)
     #error "PARKING_EXTRUDER requires SOL0_PIN and SOL1_PIN."
   #elif !defined(PARKING_EXTRUDER_PARKING_X)
     #error "PARKING_EXTRUDER requires PARKING_EXTRUDER_PARKING_X."
@@ -907,7 +907,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
 /**
  * Bed Heating Options - PID vs Limit Switching
  */
-#if ENABLED(PIDTEMPBED) && ENABLED(BED_LIMIT_SWITCHING)
+#if BOTH(PIDTEMPBED, BED_LIMIT_SWITCHING)
   #error "To use BED_LIMIT_SWITCHING you must disable PIDTEMPBED."
 #endif
 
@@ -974,7 +974,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
   /**
    * Z_PROBE_SLED is incompatible with DELTA
    */
-  #if ENABLED(Z_PROBE_SLED) && ENABLED(DELTA)
+  #if BOTH(Z_PROBE_SLED, DELTA)
     #error "You cannot use Z_PROBE_SLED with DELTA."
   #endif
 
@@ -1087,7 +1087,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
  * Bed Leveling Requirements
  */
 
-#if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(AUTO_BED_LEVELING_3POINT)
+#if EITHER(AUTO_BED_LEVELING_UBL, AUTO_BED_LEVELING_3POINT)
   static_assert(WITHIN(PROBE_PT_1_X, MIN_PROBE_X, MAX_PROBE_X), "PROBE_PT_1_X is outside the probe region.");
   static_assert(WITHIN(PROBE_PT_2_X, MIN_PROBE_X, MAX_PROBE_X), "PROBE_PT_2_X is outside the probe region.");
   static_assert(WITHIN(PROBE_PT_3_X, MIN_PROBE_X, MAX_PROBE_X), "PROBE_PT_3_X is outside the probe region.");
@@ -1221,8 +1221,8 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
 /**
  * Make sure DISABLE_[XYZ] compatible with selected homing options
  */
-#if ENABLED(DISABLE_X) || ENABLED(DISABLE_Y) || ENABLED(DISABLE_Z)
+#if ANY(DISABLE_X, DISABLE_Y, DISABLE_Z)
-  #if ENABLED(HOME_AFTER_DEACTIVATE) || ENABLED(Z_SAFE_HOMING)
+  #if EITHER(HOME_AFTER_DEACTIVATE, Z_SAFE_HOMING)
     #error "DISABLE_[XYZ] is not compatible with HOME_AFTER_DEACTIVATE or Z_SAFE_HOMING."
   #endif
 #endif
@@ -1255,7 +1255,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
 #if ENABLED(SAV_3DGLCD)
   #if DISABLED(U8GLIB_SSD1306) && DISABLED(U8GLIB_SH1106)
     #error "Enable a SAV_3DGLCD display type: U8GLIB_SSD1306 or U8GLIB_SH1106."
-  #elif ENABLED(U8GLIB_SSD1306) && ENABLED(U8GLIB_SH1106)
+  #elif BOTH(U8GLIB_SSD1306, U8GLIB_SH1106)
     #error "Only enable one SAV_3DGLCD display type: U8GLIB_SSD1306 or U8GLIB_SH1106."
   #endif
 #endif
@@ -1334,11 +1334,11 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
  */
 #if !HAS_HEATER_0
   #error "HEATER_0_PIN not defined for this board."
-#elif !PIN_EXISTS(TEMP_0) && !PIN_EXISTS(MAX6675_SS)
+#elif !ANY_PIN(TEMP_0, MAX6675_SS)
   #error "TEMP_0_PIN not defined for this board."
-#elif ((defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284P__)) && (!PIN_EXISTS(E0_STEP) || !PIN_EXISTS(E0_DIR)))
+#elif ((defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284P__)) && !PIN_EXISTS(E0_STEP, E0_DIR))
   #error "E0_STEP_PIN or E0_DIR_PIN not defined for this board."
-#elif ( !(defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284P__)) && (!PIN_EXISTS(E0_STEP) || !PIN_EXISTS(E0_DIR) || !HAS_E0_ENABLE))
+#elif ( !(defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284P__)) && (!PIN_EXISTS(E0_STEP, E0_DIR) || !HAS_E0_ENABLE))
   #error "E0_STEP_PIN, E0_DIR_PIN, or E0_ENABLE_PIN not defined for this board."
 #elif TEMP_SENSOR_0 == 0
   #error "TEMP_SENSOR_0 is required."
@@ -1356,7 +1356,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
     #error "MAX6675_SS2_PIN (required for TEMP_SENSOR_1) not defined for this board."
   #elif TEMP_SENSOR_1 == 0
     #error "TEMP_SENSOR_1 is required with 2 or more HOTENDS."
-  #elif !PIN_EXISTS(TEMP_1) && !PIN_EXISTS(MAX6675_SS2)
+  #elif !ANY_PIN(TEMP_1, MAX6675_SS2)
     #error "TEMP_1_PIN not defined for this board."
   #endif
   #if HOTENDS > 2
@@ -1434,7 +1434,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
 /**
  * Temperature status LEDs
  */
-#if ENABLED(TEMP_STAT_LEDS) && !PIN_EXISTS(STAT_LED_RED) && !PIN_EXISTS(STAT_LED_BLUE)
+#if ENABLED(TEMP_STAT_LEDS) && !ANY_PIN(STAT_LED_RED, STAT_LED_BLUE)
   #error "TEMP_STAT_LEDS requires STAT_LED_RED_PIN or STAT_LED_BLUE_PIN, preferably both."
 #endif
 
@@ -1442,7 +1442,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
  * LED Control Menu
  */
 #if ENABLED(LED_CONTROL_MENU) && !HAS_COLOR_LEDS
-  #error "LED_CONTROL_MENU requires BLINKM, RGB_LED, RGBW_LED, PCA9632, or NEOPIXEL_LED."
+  #error "LED_CONTROL_MENU requires BLINKM, RGB_LED, RGBW_LED, PCA9533, PCA9632, or NEOPIXEL_LED."
 #endif
 
 /**
@@ -1467,27 +1467,27 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
  */
 #if DISABLED(MK2_MULTIPLEXER) // MK2_MULTIPLEXER uses E0 stepper only
   #if E_STEPPERS
-    #if !(PIN_EXISTS(E0_STEP) && PIN_EXISTS(E0_DIR) && HAS_E0_ENABLE)
+    #if !(PIN_EXISTS(E0_STEP, E0_DIR) && HAS_E0_ENABLE)
       #error "E0_STEP_PIN, E0_DIR_PIN, or E0_ENABLE_PIN not defined for this board."
     #endif
     #if E_STEPPERS > 1
-      #if !(PIN_EXISTS(E1_STEP) && PIN_EXISTS(E1_DIR) && HAS_E1_ENABLE)
+      #if !(PIN_EXISTS(E1_STEP, E1_DIR) && HAS_E1_ENABLE)
         #error "E1_STEP_PIN, E1_DIR_PIN, or E1_ENABLE_PIN not defined for this board."
       #endif
       #if E_STEPPERS > 2
-        #if !(PIN_EXISTS(E2_STEP) && PIN_EXISTS(E2_DIR) && HAS_E2_ENABLE)
+        #if !(PIN_EXISTS(E2_STEP, E2_DIR) && HAS_E2_ENABLE)
           #error "E2_STEP_PIN, E2_DIR_PIN, or E2_ENABLE_PIN not defined for this board."
         #endif
         #if E_STEPPERS > 3
-          #if !(PIN_EXISTS(E3_STEP) && PIN_EXISTS(E3_DIR) && HAS_E3_ENABLE)
+          #if !(PIN_EXISTS(E3_STEP, E3_DIR) && HAS_E3_ENABLE)
             #error "E3_STEP_PIN, E3_DIR_PIN, or E3_ENABLE_PIN not defined for this board."
           #endif
           #if E_STEPPERS > 4
-            #if !(PIN_EXISTS(E4_STEP) && PIN_EXISTS(E4_DIR) && HAS_E4_ENABLE)
+            #if !(PIN_EXISTS(E4_STEP, E4_DIR) && HAS_E4_ENABLE)
               #error "E4_STEP_PIN, E4_DIR_PIN, or E4_ENABLE_PIN not defined for this board."
             #endif
             #if E_STEPPERS > 5
-              #if !(PIN_EXISTS(E5_STEP) && PIN_EXISTS(E5_DIR) && HAS_E5_ENABLE)
+              #if !(PIN_EXISTS(E5_STEP, E5_DIR) && HAS_E5_ENABLE)
                 #error "E5_STEP_PIN, E5_DIR_PIN, or E5_ENABLE_PIN not defined for this board."
               #endif
             #endif // E_STEPPERS > 5
@@ -1675,9 +1675,9 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
 /**
  * RGB_LED Requirements
  */
-#define _RGB_TEST (PIN_EXISTS(RGB_LED_R) && PIN_EXISTS(RGB_LED_G) && PIN_EXISTS(RGB_LED_B))
+#define _RGB_TEST (PIN_EXISTS(RGB_LED_R, RGB_LED_G, RGB_LED_B))
 #if ENABLED(PRINTER_EVENT_LEDS) && !HAS_COLOR_LEDS
-  #error "PRINTER_EVENT_LEDS requires BLINKM, PCA9632, RGB_LED, RGBW_LED or NEOPIXEL_LED."
+  #error "PRINTER_EVENT_LEDS requires BLINKM, PCA9533, PCA9632, RGB_LED, RGBW_LED or NEOPIXEL_LED."
 #elif ENABLED(RGB_LED)
   #if !_RGB_TEST
     #error "RGB_LED requires RGB_LED_R_PIN, RGB_LED_G_PIN, and RGB_LED_B_PIN."
@@ -1813,7 +1813,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
 /**
  * Check existing RX/TX pins against enable TMC UART drivers.
  */
-#define INVALID_TMC2208(ST) (AXIS_DRIVER_TYPE(ST, TMC2208) && !(defined(ST##_HARDWARE_SERIAL) || (PIN_EXISTS(ST##_SERIAL_RX) && PIN_EXISTS(ST##_SERIAL_TX))))
+#define INVALID_TMC2208(ST) (AXIS_DRIVER_TYPE(ST, TMC2208) && !(defined(ST##_HARDWARE_SERIAL) || (PIN_EXISTS(ST##_SERIAL_RX, ST##_SERIAL_TX))))
 #if INVALID_TMC2208(X)
   #error "TMC2208 on X requires X_HARDWARE_SERIAL or X_SERIAL_(RX|TX)_PIN."
 #elif INVALID_TMC2208(X2)
@@ -1887,7 +1887,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
   // is necessary in order to reset the stallGuard indication between the initial movement of all three
   // towers to +Z and the individual homing of each tower. This restriction can be removed once a means of
   // clearing the stallGuard activated status is found.
-  #if ENABLED(DELTA) && !(ENABLED(STEALTHCHOP_XY) && ENABLED(STEALTHCHOP_Z))
+  #if ENABLED(DELTA) && !BOTH(STEALTHCHOP_XY, STEALTHCHOP_Z)
     #error "SENSORLESS_HOMING on DELTA currently requires STEALTHCHOP_XY and STEALTHCHOP_Z."
   #elif X_SENSORLESS && X_HOME_DIR == -1 && (!X_MIN_ENDSTOP_INVERTING || DISABLED(ENDSTOPPULLUP_XMIN))
     #error "SENSORLESS_HOMING requires X_MIN_ENDSTOP_INVERTING and ENDSTOPPULLUP_XMIN when homing to X_MIN."
@@ -1909,7 +1909,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
 // Sensorless homing/probing requirements
 #if ENABLED(SENSORLESS_HOMING) && !(X_SENSORLESS || Y_SENSORLESS || Z_SENSORLESS)
   #error "SENSORLESS_HOMING requires a TMC stepper driver with StallGuard on X, Y, or Z axes."
-#elif ENABLED(SENSORLESS_PROBING) && ENABLED(DELTA) && !(X_SENSORLESS && Y_SENSORLESS && Z_SENSORLESS)
+#elif BOTH(SENSORLESS_PROBING, DELTA) && !(X_SENSORLESS && Y_SENSORLESS && Z_SENSORLESS)
   #error "SENSORLESS_PROBING for DELTA requires TMC stepper drivers with StallGuard on X, Y, and Z axes."
 #elif ENABLED(SENSORLESS_PROBING) && !Z_SENSORLESS
   #error "SENSORLESS_PROBING requires a TMC stepper driver with StallGuard on Z."
@@ -1981,7 +1981,7 @@ static_assert(   _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2)
 
 #undef _ARR_TEST
 
-#if ENABLED(CNC_COORDINATE_SYSTEMS) && ENABLED(NO_WORKSPACE_OFFSETS)
+#if BOTH(CNC_COORDINATE_SYSTEMS, NO_WORKSPACE_OFFSETS)
   #error "CNC_COORDINATE_SYSTEMS is incompatible with NO_WORKSPACE_OFFSETS."
 #endif
 
@@ -2036,7 +2036,7 @@ static_assert(   _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2)
   #error "PRINTCOUNTER requires EEPROM_SETTINGS. Please update your Configuration."
 #endif
 
-#if ENABLED(USB_FLASH_DRIVE_SUPPORT) && !(PIN_EXISTS(USB_CS) && PIN_EXISTS(USB_INTR))
+#if ENABLED(USB_FLASH_DRIVE_SUPPORT) && !PIN_EXISTS(USB_CS, USB_INTR)
   #error "USB_CS_PIN and USB_INTR_PIN are required for USB_FLASH_DRIVE_SUPPORT."
 #endif
 

Marlin/src/lcd/HD44780/ultralcd_HD44780.cpp

@@ -40,7 +40,7 @@
 #include "../../module/planner.h"
 #include "../../module/motion.h"
 
-#if DISABLED(LCD_PROGRESS_BAR) && ENABLED(FILAMENT_LCD_DISPLAY) && ENABLED(SDSUPPORT)
+#if DISABLED(LCD_PROGRESS_BAR) && BOTH(FILAMENT_LCD_DISPLAY, SDSUPPORT)
   #include "../../feature/filwidth.h"
   #include "../../gcode/parser.h"
 #endif
@@ -57,7 +57,7 @@
 
   LCD_CLASS lcd(LCD_I2C_ADDRESS, LCD_I2C_PIN_EN, LCD_I2C_PIN_RW, LCD_I2C_PIN_RS, LCD_I2C_PIN_D4, LCD_I2C_PIN_D5, LCD_I2C_PIN_D6, LCD_I2C_PIN_D7);
 
-#elif ENABLED(LCD_I2C_TYPE_MCP23017) || ENABLED(LCD_I2C_TYPE_MCP23008)
+#elif EITHER(LCD_I2C_TYPE_MCP23017, LCD_I2C_TYPE_MCP23008)
 
   LCD_CLASS lcd(LCD_I2C_ADDRESS
     #ifdef DETECT_DEVICE
@@ -628,7 +628,7 @@ void MarlinUI::draw_status_message(const bool blink) {
       if (progress > 2) return draw_progress_bar(progress);
     }
 
-  #elif ENABLED(FILAMENT_LCD_DISPLAY) && ENABLED(SDSUPPORT)
+  #elif BOTH(FILAMENT_LCD_DISPLAY, SDSUPPORT)
 
     // Alternate Status message and Filament display
     if (ELAPSED(millis(), next_filament_display)) {

Marlin/src/lcd/dogm/status_screen_DOGM.cpp

@@ -572,7 +572,7 @@ void MarlinUI::draw_status_screen() {
   if (PAGE_CONTAINS(STATUS_BASELINE - INFO_FONT_ASCENT, STATUS_BASELINE + INFO_FONT_DESCENT)) {
     lcd_moveto(0, STATUS_BASELINE);
 
-    #if ENABLED(FILAMENT_LCD_DISPLAY) && ENABLED(SDSUPPORT)
+    #if BOTH(FILAMENT_LCD_DISPLAY, SDSUPPORT)
       // Alternate Status message and Filament display
       if (ELAPSED(millis(), next_filament_display)) {
         lcd_put_u8str_P(PSTR(LCD_STR_FILAM_DIA));

Marlin/src/lcd/dogm/status_screen_lite_ST7920.cpp

@@ -862,7 +862,7 @@ void ST7920_Lite_Status_Screen::update_status_or_position(bool forceUpdate) {
 }
 
 void ST7920_Lite_Status_Screen::update_progress(const bool forceUpdate) {
-  #if ENABLED(LCD_SET_PROGRESS_MANUALLY) || ENABLED(SDSUPPORT)
+  #if EITHER(LCD_SET_PROGRESS_MANUALLY, SDSUPPORT)
 
     // Since the progress bar involves writing
     // quite a few bytes to GDRAM, only do this

Marlin/src/lcd/dogm/ultralcd_DOGM.cpp

@@ -189,7 +189,7 @@ void MarlinUI::init_lcd() {
     OUT_WRITE(LCD_BACKLIGHT_PIN, HIGH);
   #endif
 
-  #if ENABLED(MKS_12864OLED) || ENABLED(MKS_12864OLED_SSD1306)
+  #if EITHER(MKS_12864OLED, MKS_12864OLED_SSD1306)
     SET_OUTPUT(LCD_PINS_DC);
     #if !defined(LCD_RESET_PIN)
       #define LCD_RESET_PIN LCD_PINS_RS
@@ -497,7 +497,7 @@ void MarlinUI::clear_lcd() { } // Automatically cleared by Picture Loop
 
   #endif // AUTO_BED_LEVELING_UBL
 
-  #if ENABLED(BABYSTEP_ZPROBE_GFX_OVERLAY) || ENABLED(MESH_EDIT_GFX_OVERLAY)
+  #if EITHER(BABYSTEP_ZPROBE_GFX_OVERLAY, MESH_EDIT_GFX_OVERLAY)
 
     const unsigned char cw_bmp[] PROGMEM = {
       B00000011,B11111000,B00000000,

Marlin/src/lcd/extensible_ui/ui_api.cpp

@@ -59,7 +59,7 @@
   #include "../../core/utility.h"
 #endif
 
-#if DO_SWITCH_EXTRUDER || ENABLED(SWITCHING_NOZZLE) || ENABLED(PARKING_EXTRUDER)
+#if DO_SWITCH_EXTRUDER || EITHER(SWITCHING_NOZZLE, PARKING_EXTRUDER)
   #include "../../module/tool_change.h"
 #endif
 
@@ -297,7 +297,7 @@ namespace ExtUI {
   void setActiveTool(const extruder_t extruder, bool no_move) {
     #if EXTRUDERS > 1
       const uint8_t e = extruder - E0;
-      #if DO_SWITCH_EXTRUDER || ENABLED(SWITCHING_NOZZLE) || ENABLED(PARKING_EXTRUDER)
+      #if DO_SWITCH_EXTRUDER || EITHER(SWITCHING_NOZZLE, PARKING_EXTRUDER)
         if (e != active_extruder)
           tool_change(e, 0, no_move);
       #endif

Marlin/src/lcd/menu/menu.cpp

@@ -45,7 +45,7 @@
   #include "../../module/probe.h"
 #endif
 
-#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(ENABLE_LEVELING_FADE_HEIGHT, AUTO_BED_LEVELING_UBL)
   #include "../../feature/bedlevel/bedlevel.h"
 #endif
 
@@ -205,7 +205,7 @@ void MarlinUI::goto_screen(screenFunc_t screen, const uint32_t encoder/*=0*/) {
       lcd_z_fade_height = planner.z_fade_height;
     #endif
 
-    #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) && ENABLED(BABYSTEPPING)
+    #if BOTH(DOUBLECLICK_FOR_Z_BABYSTEPPING, BABYSTEPPING)
       static millis_t doubleclick_expire_ms = 0;
       // Going to menu_main from status screen? Remember first click time.
       // Going back to status screen within a very short time? Go to Z babystepping.
@@ -405,7 +405,7 @@ void MarlinUI::completion_feedback(const bool good/*=true*/) {
 
 #endif // BABYSTEP_ZPROBE_OFFSET
 
-#if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(PID_AUTOTUNE_MENU) || ENABLED(ADVANCED_PAUSE_FEATURE)
+#if ANY(AUTO_BED_LEVELING_UBL, PID_AUTOTUNE_MENU, ADVANCED_PAUSE_FEATURE)
 
   void lcd_enqueue_command(const char * const cmd) {
     no_reentry = true;

Marlin/src/lcd/menu/menu.h

@@ -82,7 +82,7 @@ FORCE_INLINE void draw_menu_item_edit_P(const bool sel, const uint8_t row, PGM_P
   FORCE_INLINE void draw_menu_item_sdfolder(const bool sel, const uint8_t row, PGM_P const pstr, CardReader &theCard) { draw_sd_menu_item(sel, row, pstr, theCard, true); }
 #endif
 
-#if HAS_GRAPHICAL_LCD && (ENABLED(BABYSTEP_ZPROBE_GFX_OVERLAY) || ENABLED(MESH_EDIT_GFX_OVERLAY))
+#if HAS_GRAPHICAL_LCD && EITHER(BABYSTEP_ZPROBE_GFX_OVERLAY, MESH_EDIT_GFX_OVERLAY)
   void _lcd_zoffset_overlay_gfx(const float zvalue);
 #endif
 
@@ -340,13 +340,13 @@ void menu_move();
 void lcd_move_z();
 void _lcd_draw_homing();
 
-#define HAS_LINE_TO_Z (ENABLED(DELTA) || ENABLED(PROBE_MANUALLY) || ENABLED(MESH_BED_LEVELING) || ENABLED(LEVEL_BED_CORNERS))
+#define HAS_LINE_TO_Z ANY(DELTA, PROBE_MANUALLY, MESH_BED_LEVELING, LEVEL_BED_CORNERS)
 
 #if HAS_LINE_TO_Z
   void line_to_z(const float &z);
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(PID_AUTOTUNE_MENU) || ENABLED(ADVANCED_PAUSE_FEATURE)
+#if ANY(AUTO_BED_LEVELING_UBL, PID_AUTOTUNE_MENU, ADVANCED_PAUSE_FEATURE)
   void lcd_enqueue_command(const char * const cmd);
   void lcd_enqueue_commands_P(PGM_P const cmd);
 #endif

Marlin/src/lcd/menu/menu_advanced.cpp

@@ -321,7 +321,7 @@ void menu_tmc();
   #endif // PID_PARAMS_PER_HOTEND
 #endif // HOTENDS
 
-#define SHOW_MENU_ADVANCED_TEMPERATURE ((ENABLED(AUTOTEMP) && HAS_TEMP_HOTEND) || ENABLED(PID_AUTOTUNE_MENU) || ENABLED(PID_EDIT_MENU))
+#define SHOW_MENU_ADVANCED_TEMPERATURE ((ENABLED(AUTOTEMP) && HAS_TEMP_HOTEND) || EITHER(PID_AUTOTUNE_MENU, PID_EDIT_MENU))
 
 //
 // Advanced Settings > Temperature

Marlin/src/lcd/menu/menu_bed_leveling.cpp

@@ -36,7 +36,7 @@
   #include "../../module/probe.h"
 #endif
 
-#if ENABLED(PROBE_MANUALLY) || ENABLED(MESH_BED_LEVELING)
+#if EITHER(PROBE_MANUALLY, MESH_BED_LEVELING)
 
   #include "../../module/motion.h"
   #include "../../gcode/queue.h"
@@ -244,7 +244,7 @@ void menu_bed_leveling() {
   #endif
 
   // Level Bed
-  #if ENABLED(PROBE_MANUALLY) || ENABLED(MESH_BED_LEVELING)
+  #if EITHER(PROBE_MANUALLY, MESH_BED_LEVELING)
     // Manual leveling uses a guided procedure
     MENU_ITEM(submenu, MSG_LEVEL_BED, _lcd_level_bed_continue);
   #else

Marlin/src/lcd/menu/menu_configuration.cpp

@@ -275,7 +275,7 @@ void menu_configuration() {
     //
     // Delta Calibration
     //
-    #if ENABLED(DELTA_CALIBRATION_MENU) || ENABLED(DELTA_AUTO_CALIBRATION)
+    #if EITHER(DELTA_CALIBRATION_MENU, DELTA_AUTO_CALIBRATION)
       MENU_ITEM(submenu, MSG_DELTA_CALIBRATE, menu_delta_calibrate);
     #endif
 

Marlin/src/lcd/menu/menu_delta_calibrate.cpp

@@ -26,7 +26,7 @@
 
 #include "../../inc/MarlinConfigPre.h"
 
-#if HAS_LCD_MENU && (ENABLED(DELTA_CALIBRATION_MENU) || ENABLED(DELTA_AUTO_CALIBRATION))
+#if HAS_LCD_MENU && EITHER(DELTA_CALIBRATION_MENU, DELTA_AUTO_CALIBRATION)
 
 #include "menu.h"
 #include "../../module/delta.h"

Marlin/src/lcd/menu/menu_led.cpp

@@ -58,7 +58,7 @@ void menu_led_custom() {
   MENU_ITEM_EDIT_CALLBACK(uint8, MSG_INTENSITY_R, &leds.color.r, 0, 255, leds.update, true);
   MENU_ITEM_EDIT_CALLBACK(uint8, MSG_INTENSITY_G, &leds.color.g, 0, 255, leds.update, true);
   MENU_ITEM_EDIT_CALLBACK(uint8, MSG_INTENSITY_B, &leds.color.b, 0, 255, leds.update, true);
-  #if ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_LED)
+  #if EITHER(RGBW_LED, NEOPIXEL_LED)
     MENU_ITEM_EDIT_CALLBACK(uint8, MSG_INTENSITY_W, &leds.color.w, 0, 255, leds.update, true);
     #if ENABLED(NEOPIXEL_LED)
       MENU_ITEM_EDIT_CALLBACK(uint8, MSG_LED_BRIGHTNESS, &leds.color.i, 0, 255, leds.update, true);

Marlin/src/lcd/menu/menu_main.cpp

@@ -46,8 +46,8 @@
   #include "../../feature/host_actions.h"
 #endif
 
-#define MACHINE_CAN_STOP (ENABLED(SDSUPPORT) || ENABLED(HOST_PROMPT_SUPPORT) || defined(ACTION_ON_CANCEL))
+#define MACHINE_CAN_STOP (EITHER(SDSUPPORT, HOST_PROMPT_SUPPORT) || defined(ACTION_ON_CANCEL))
-#define MACHINE_CAN_PAUSE (ENABLED(SDSUPPORT) || ENABLED(HOST_PROMPT_SUPPORT) || ENABLED(PARK_HEAD_ON_PAUSE) || defined(ACTION_ON_PAUSE))
+#define MACHINE_CAN_PAUSE (ANY(SDSUPPORT, HOST_PROMPT_SUPPORT, PARK_HEAD_ON_PAUSE) || defined(ACTION_ON_PAUSE))
 
 #if MACHINE_CAN_PAUSE
 

Marlin/src/lcd/menu/menu_motion.cpp

@@ -335,7 +335,7 @@ void menu_move() {
   else
     MENU_ITEM(gcode, MSG_AUTO_HOME, PSTR("G28"));
 
-  #if ENABLED(SWITCHING_EXTRUDER) || ENABLED(SWITCHING_NOZZLE)
+  #if EITHER(SWITCHING_EXTRUDER, SWITCHING_NOZZLE)
 
     #if EXTRUDERS == 6
       switch (active_extruder) {
@@ -376,7 +376,7 @@ void menu_move() {
 
   #endif
 
-  #if ENABLED(SWITCHING_EXTRUDER) || ENABLED(SWITCHING_NOZZLE)
+  #if EITHER(SWITCHING_EXTRUDER, SWITCHING_NOZZLE)
 
     // Only the current...
     MENU_ITEM(submenu, MSG_MOVE_E, lcd_move_get_e_amount);

Marlin/src/lcd/menu/menu_tune.cpp

@@ -107,7 +107,7 @@ void menu_tune() {
   //
   // Manual bed leveling, Bed Z:
   //
-  #if ENABLED(MESH_BED_LEVELING) && ENABLED(LCD_BED_LEVELING)
+  #if BOTH(MESH_BED_LEVELING, LCD_BED_LEVELING)
     MENU_ITEM_EDIT(float43, MSG_BED_Z, &mbl.z_offset, -1, 1);
   #endif
 

Marlin/src/lcd/ultralcd.cpp

@@ -23,7 +23,7 @@
 #include "../inc/MarlinConfigPre.h"
 
 // These displays all share the MarlinUI class
-#if HAS_SPI_LCD || ENABLED(MALYAN_LCD) || ENABLED(EXTENSIBLE_UI)
+#if HAS_SPI_LCD || EITHER(MALYAN_LCD, EXTENSIBLE_UI)
   #include "ultralcd.h"
   MarlinUI ui;
   #include "../sd/cardreader.h"
@@ -106,7 +106,7 @@
 
 uint8_t MarlinUI::lcd_status_update_delay = 1; // First update one loop delayed
 
-#if ENABLED(FILAMENT_LCD_DISPLAY) && ENABLED(SDSUPPORT)
+#if BOTH(FILAMENT_LCD_DISPLAY, SDSUPPORT)
   millis_t MarlinUI::next_filament_display; // = 0
 #endif
 
@@ -181,7 +181,7 @@ millis_t next_button_update_ms;
     return click;
   }
 
-  #if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(G26_MESH_VALIDATION)
+  #if EITHER(AUTO_BED_LEVELING_UBL, G26_MESH_VALIDATION)
 
     bool MarlinUI::external_control; // = false
 
@@ -449,7 +449,7 @@ void MarlinUI::status_screen() {
   #if HAS_LCD_MENU
 
     if (use_click()) {
-      #if ENABLED(FILAMENT_LCD_DISPLAY) && ENABLED(SDSUPPORT)
+      #if BOTH(FILAMENT_LCD_DISPLAY, SDSUPPORT)
         next_filament_display = millis() + 5000UL;  // Show status message for 5s
       #endif
       goto_screen(menu_main);
@@ -638,7 +638,7 @@ LCDViewAction MarlinUI::lcdDrawUpdate = LCDVIEW_CLEAR_CALL_REDRAW;
 
 bool MarlinUI::detected() {
   return
-    #if (ENABLED(LCD_I2C_TYPE_MCP23017) || ENABLED(LCD_I2C_TYPE_MCP23008)) && defined(DETECT_DEVICE)
+    #if EITHER(LCD_I2C_TYPE_MCP23017, LCD_I2C_TYPE_MCP23008) && defined(DETECT_DEVICE)
       lcd.LcdDetected() == 1
     #else
       true
@@ -1008,7 +1008,7 @@ void MarlinUI::update() {
 
       #if HAS_DIGITAL_BUTTONS
 
-        #if BUTTON_EXISTS(EN1) || BUTTON_EXISTS(EN2) || BUTTON_EXISTS(ENC) || BUTTON_EXISTS(BACK)
+        #if ANY_BUTTON(EN1, EN2, ENC, BACK)
 
           uint8_t newbutton = 0;
 
@@ -1034,7 +1034,7 @@ void MarlinUI::update() {
         //
         // Directional buttons
         //
-        #if BUTTON_EXISTS(UP) || BUTTON_EXISTS(DWN) || BUTTON_EXISTS(LFT) || BUTTON_EXISTS(RT)
+        #if ANY_BUTTON(UP, DWN, LFT, RT)
 
           const int8_t pulses = (ENCODER_PULSES_PER_STEP) * encoderDirection;
 
@@ -1175,7 +1175,7 @@ void MarlinUI::update() {
       #endif
     #endif
 
-    #if ENABLED(FILAMENT_LCD_DISPLAY) && ENABLED(SDSUPPORT)
+    #if BOTH(FILAMENT_LCD_DISPLAY, SDSUPPORT)
       next_filament_display = millis() + 5000UL; // Show status message for 5s
     #endif
 

Marlin/src/lcd/ultralcd.h

@@ -27,18 +27,13 @@
   #include "../libs/buzzer.h"
 #endif
 
-#define HAS_DIGITAL_BUTTONS (!HAS_ADC_BUTTONS && ENABLED(NEWPANEL)        \
+#define HAS_DIGITAL_BUTTONS (!HAS_ADC_BUTTONS && ENABLED(NEWPANEL) || BUTTON_EXISTS(EN1, EN2) || ANY_BUTTON(ENC, BACK, UP, DWN, LFT, RT))
-                            || (BUTTON_EXISTS(EN1) && BUTTON_EXISTS(EN2)) \
-                            || BUTTON_EXISTS(ENC) || BUTTON_EXISTS(BACK)  \
-                            || BUTTON_EXISTS(UP)  || BUTTON_EXISTS(DWN)   \
-                            || BUTTON_EXISTS(LFT) || BUTTON_EXISTS(RT))
-
 #define HAS_SHIFT_ENCODER   (!HAS_ADC_BUTTONS && (ENABLED(REPRAPWORLD_KEYPAD) || (HAS_SPI_LCD && DISABLED(NEWPANEL))))
-#define HAS_ENCODER_WHEEL  ((!HAS_ADC_BUTTONS && ENABLED(NEWPANEL)) || (BUTTON_EXISTS(EN1) && BUTTON_EXISTS(EN2)) )
+#define HAS_ENCODER_WHEEL  ((!HAS_ADC_BUTTONS && ENABLED(NEWPANEL)) || BUTTON_EXISTS(EN1, EN2))
 #define HAS_ENCODER_ACTION (HAS_LCD_MENU || ENABLED(ULTIPANEL_FEEDMULTIPLY))
 
 // I2C buttons must be read in the main thread
-#define HAS_SLOW_BUTTONS (ENABLED(LCD_I2C_VIKI) || ENABLED(LCD_I2C_PANELOLU2))
+#define HAS_SLOW_BUTTONS EITHER(LCD_I2C_VIKI, LCD_I2C_PANELOLU2)
 
 #if HAS_SPI_LCD
 
@@ -188,7 +183,7 @@
 #else
 
   #undef BUTTON_EXISTS
-  #define BUTTON_EXISTS(BN) false
+  #define BUTTON_EXISTS(...) false
 
   // Shift register bits correspond to buttons:
   #define BL_LE 7   // Left
@@ -267,7 +262,7 @@ public:
   static void clear_lcd();
   static void init_lcd();
 
-  #if HAS_SPI_LCD || ENABLED(MALYAN_LCD) || ENABLED(EXTENSIBLE_UI)
+  #if HAS_SPI_LCD || EITHER(MALYAN_LCD, EXTENSIBLE_UI)
     static void init();
     static void update();
     static void set_alert_status_P(PGM_P message);
@@ -343,7 +338,7 @@ public:
         static inline void refresh_contrast() { set_contrast(contrast); }
       #endif
 
-      #if ENABLED(FILAMENT_LCD_DISPLAY) && ENABLED(SDSUPPORT)
+      #if BOTH(FILAMENT_LCD_DISPLAY, SDSUPPORT)
         static millis_t next_filament_display;
       #endif
 
@@ -466,13 +461,13 @@ public:
 
   #endif
 
-  #if ENABLED(LCD_BED_LEVELING) && (ENABLED(PROBE_MANUALLY) || ENABLED(MESH_BED_LEVELING))
+  #if ENABLED(LCD_BED_LEVELING) && EITHER(PROBE_MANUALLY, MESH_BED_LEVELING)
     static bool wait_for_bl_move;
   #else
     static constexpr bool wait_for_bl_move = false;
   #endif
 
-  #if HAS_LCD_MENU && (ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(G26_MESH_VALIDATION))
+  #if HAS_LCD_MENU && EITHER(AUTO_BED_LEVELING_UBL, G26_MESH_VALIDATION)
     static bool external_control;
     FORCE_INLINE static void capture() { external_control = true; }
     FORCE_INLINE static void release() { external_control = false; }
@@ -493,7 +488,7 @@ public:
     #endif
     static void update_buttons();
     static inline bool button_pressed() { return BUTTON_CLICK(); }
-    #if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(G26_MESH_VALIDATION)
+    #if EITHER(AUTO_BED_LEVELING_UBL, G26_MESH_VALIDATION)
       static void wait_for_release();
     #endif
 

Marlin/src/libs/hex_print_routines.cpp

@@ -23,7 +23,7 @@
 #include "../inc/MarlinConfig.h"
 #include "../gcode/parser.h"
 
-#if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(M100_FREE_MEMORY_WATCHER) || ENABLED(DEBUG_GCODE_PARSER) || ENABLED(TMC_DEBUG)
+#if ANY(AUTO_BED_LEVELING_UBL, M100_FREE_MEMORY_WATCHER, DEBUG_GCODE_PARSER, TMC_DEBUG)
 
   #include "hex_print_routines.h"
 

Marlin/src/libs/least_squares_fit.cpp

@@ -34,7 +34,7 @@
 
 #include "../inc/MarlinConfig.h"
 
-#if ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(AUTO_BED_LEVELING_LINEAR)
+#if EITHER(AUTO_BED_LEVELING_UBL, AUTO_BED_LEVELING_LINEAR)
 
 #include "least_squares_fit.h"
 

Marlin/src/libs/nozzle.cpp

@@ -22,7 +22,7 @@
 
 #include "../inc/MarlinConfig.h"
 
-#if ENABLED(NOZZLE_CLEAN_FEATURE) || ENABLED(NOZZLE_PARK_FEATURE)
+#if EITHER(NOZZLE_CLEAN_FEATURE, NOZZLE_PARK_FEATURE)
 
 #include "nozzle.h"
 

Marlin/src/module/configuration_store.cpp

@@ -56,7 +56,7 @@
 #include "../gcode/gcode.h"
 #include "../Marlin.h"
 
-#if ENABLED(EEPROM_SETTINGS) || ENABLED(SD_FIRMWARE_UPDATE)
+#if EITHER(EEPROM_SETTINGS, SD_FIRMWARE_UPDATE)
   #include "../HAL/shared/persistent_store_api.h"
 #endif
 
@@ -194,7 +194,7 @@ typedef struct SettingsDataStruct {
           delta_segments_per_second,                    // M665 S
           delta_calibration_radius,                     // M665 B
           delta_tower_angle_trim[ABC];                  // M665 XYZ
-  #elif ENABLED(X_DUAL_ENDSTOPS) || ENABLED(Y_DUAL_ENDSTOPS) || Z_MULTI_ENDSTOPS
+  #elif EITHER(X_DUAL_ENDSTOPS, Y_DUAL_ENDSTOPS) || Z_MULTI_ENDSTOPS
     float x2_endstop_adj,                               // M666 X
           y2_endstop_adj,                               // M666 Y
           z2_endstop_adj,                               // M666 Z (S2)
@@ -340,7 +340,7 @@ void MarlinSettings::postprocess() {
     fwretract.refresh_autoretract();
   #endif
 
-  #if ENABLED(JUNCTION_DEVIATION) && ENABLED(LIN_ADVANCE)
+  #if BOTH(JUNCTION_DEVIATION, LIN_ADVANCE)
     planner.recalculate_max_e_jerk();
   #endif
 
@@ -448,7 +448,7 @@ void MarlinSettings::postprocess() {
 
       #if HAS_CLASSIC_JERK
         EEPROM_WRITE(planner.max_jerk);
-        #if ENABLED(JUNCTION_DEVIATION) && ENABLED(LIN_ADVANCE)
+        #if BOTH(JUNCTION_DEVIATION, LIN_ADVANCE)
           dummy = float(DEFAULT_EJERK);
           EEPROM_WRITE(dummy);
         #endif
@@ -624,7 +624,7 @@ void MarlinSettings::postprocess() {
         EEPROM_WRITE(delta_calibration_radius);  // 1 float
         EEPROM_WRITE(delta_tower_angle_trim);    // 3 floats
 
-      #elif ENABLED(X_DUAL_ENDSTOPS) || ENABLED(Y_DUAL_ENDSTOPS) || Z_MULTI_ENDSTOPS
+      #elif EITHER(X_DUAL_ENDSTOPS, Y_DUAL_ENDSTOPS) || Z_MULTI_ENDSTOPS
 
         _FIELD_TEST(x2_endstop_adj);
 
@@ -757,7 +757,7 @@ void MarlinSettings::postprocess() {
         const fwretract_settings_t autoretract_defaults = { 3, 45, 0, 0, 0, 13, 0, 8 };
         EEPROM_WRITE(autoretract_defaults);
       #endif
-      #if ENABLED(FWRETRACT) && ENABLED(FWRETRACT_AUTORETRACT)
+      #if BOTH(FWRETRACT, FWRETRACT_AUTORETRACT)
         EEPROM_WRITE(fwretract.autoretract_enabled);
       #else
         const bool autoretract_enabled = false;
@@ -1167,7 +1167,7 @@ void MarlinSettings::postprocess() {
 
         #if HAS_CLASSIC_JERK
           EEPROM_READ(planner.max_jerk);
-          #if ENABLED(JUNCTION_DEVIATION) && ENABLED(LIN_ADVANCE)
+          #if BOTH(JUNCTION_DEVIATION, LIN_ADVANCE)
             EEPROM_READ(dummy);
           #endif
         #else
@@ -1340,7 +1340,7 @@ void MarlinSettings::postprocess() {
           EEPROM_READ(delta_calibration_radius);  // 1 float
           EEPROM_READ(delta_tower_angle_trim);    // 3 floats
 
-        #elif ENABLED(X_DUAL_ENDSTOPS) || ENABLED(Y_DUAL_ENDSTOPS) || Z_MULTI_ENDSTOPS
+        #elif EITHER(X_DUAL_ENDSTOPS, Y_DUAL_ENDSTOPS) || Z_MULTI_ENDSTOPS
 
           _FIELD_TEST(x2_endstop_adj);
 
@@ -1472,7 +1472,7 @@ void MarlinSettings::postprocess() {
           fwretract_settings_t fwretract_settings;
           EEPROM_READ(fwretract_settings);
         #endif
-        #if ENABLED(FWRETRACT) && ENABLED(FWRETRACT_AUTORETRACT)
+        #if BOTH(FWRETRACT, FWRETRACT_AUTORETRACT)
           EEPROM_READ(fwretract.autoretract_enabled);
         #else
           bool autoretract_enabled;
@@ -2066,7 +2066,7 @@ void MarlinSettings::reset() {
     delta_calibration_radius = DELTA_CALIBRATION_RADIUS;
     COPY(delta_tower_angle_trim, dta);
 
-  #elif ENABLED(X_DUAL_ENDSTOPS) || ENABLED(Y_DUAL_ENDSTOPS) || Z_MULTI_ENDSTOPS
+  #elif EITHER(X_DUAL_ENDSTOPS, Y_DUAL_ENDSTOPS) || Z_MULTI_ENDSTOPS
 
     #if ENABLED(X_DUAL_ENDSTOPS)
       endstops.x2_endstop_adj = (
@@ -2623,7 +2623,7 @@ void MarlinSettings::reset() {
         , " Z", LINEAR_UNIT(delta_tower_angle_trim[C_AXIS])
       );
 
-    #elif ENABLED(X_DUAL_ENDSTOPS) || ENABLED(Y_DUAL_ENDSTOPS) || Z_MULTI_ENDSTOPS
+    #elif EITHER(X_DUAL_ENDSTOPS, Y_DUAL_ENDSTOPS) || Z_MULTI_ENDSTOPS
 
       CONFIG_ECHO_HEADING("Endstop adjustment:");
       CONFIG_ECHO_START();

Marlin/src/module/endstops.cpp

@@ -36,7 +36,7 @@
   #include HAL_PATH(../HAL, endstop_interrupts.h)
 #endif
 
-#if ENABLED(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) && ENABLED(SDSUPPORT)
+#if BOTH(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED, SDSUPPORT)
   #include "printcounter.h" // for print_job_timer
 #endif
 
@@ -361,7 +361,7 @@ void Endstops::event_handler() {
       ui.status_printf_P(0, PSTR(MSG_LCD_ENDSTOPS " %c %c %c %c"), chrX, chrY, chrZ, chrP);
     #endif
 
-    #if ENABLED(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) && ENABLED(SDSUPPORT)
+    #if BOTH(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED, SDSUPPORT)
       if (planner.abort_on_endstop_hit) {
         card.stopSDPrint();
         quickstop_stepper();

Marlin/src/module/motion.cpp

@@ -47,7 +47,7 @@
   #include "../feature/bedlevel/bedlevel.h"
 #endif
 
-#if ENABLED(ULTRA_LCD) || ENABLED(EXTENSIBLE_UI)
+#if EITHER(ULTRA_LCD, EXTENSIBLE_UI)
   #include "../lcd/ultralcd.h"
 #endif
 
@@ -964,7 +964,7 @@ void clean_up_after_endstop_or_probe_move() {
 void prepare_move_to_destination() {
   apply_motion_limits(destination);
 
-  #if ENABLED(PREVENT_COLD_EXTRUSION) || ENABLED(PREVENT_LENGTHY_EXTRUDE)
+  #if EITHER(PREVENT_COLD_EXTRUSION, PREVENT_LENGTHY_EXTRUDE)
 
     if (!DEBUGGING(DRYRUN)) {
       if (destination[E_AXIS] != current_position[E_AXIS]) {
@@ -1025,7 +1025,7 @@ bool axis_unhomed_error(const bool x/*=true*/, const bool y/*=true*/, const bool
     if (zz) SERIAL_CHAR('Z');
     SERIAL_ECHOLNPGM(" " MSG_FIRST);
 
-    #if ENABLED(ULTRA_LCD) || ENABLED(EXTENSIBLE_UI)
+    #if EITHER(ULTRA_LCD, EXTENSIBLE_UI)
       ui.status_printf_P(0, PSTR(MSG_HOME " %s%s%s " MSG_FIRST), xx ? MSG_X : "", yy ? MSG_Y : "", zz ? MSG_Z : "");
     #endif
     return true;

Marlin/src/module/planner.cpp

@@ -128,7 +128,7 @@ float Planner::steps_to_mm[XYZE_N];           // (mm) Millimeters per step
   #endif
 #endif
 #if HAS_CLASSIC_JERK
-  #if ENABLED(JUNCTION_DEVIATION) && ENABLED(LIN_ADVANCE)
+  #if BOTH(JUNCTION_DEVIATION, LIN_ADVANCE)
     float Planner::max_jerk[XYZ];             // (mm/s^2) M205 XYZ - The largest speed change requiring no acceleration.
   #else
     float Planner::max_jerk[XYZE];            // (mm/s^2) M205 XYZE - The largest speed change requiring no acceleration.
@@ -1751,7 +1751,7 @@ bool Planner::_populate_block(block_t * const block, bool split_move,
     SERIAL_ECHOLNPGM(" steps)");
   //*/
 
-  #if ENABLED(PREVENT_COLD_EXTRUSION) || ENABLED(PREVENT_LENGTHY_EXTRUDE)
+  #if EITHER(PREVENT_COLD_EXTRUSION, PREVENT_LENGTHY_EXTRUDE)
     if (de) {
       #if ENABLED(PREVENT_COLD_EXTRUSION)
         if (thermalManager.tooColdToExtrude(extruder)) {
@@ -2104,7 +2104,7 @@ bool Planner::_populate_block(block_t * const block, bool split_move,
   const uint8_t moves_queued = nonbusy_movesplanned();
 
   // Slow down when the buffer starts to empty, rather than wait at the corner for a buffer refill
-  #if ENABLED(SLOWDOWN) || ENABLED(ULTRA_LCD) || defined(XY_FREQUENCY_LIMIT)
+  #if EITHER(SLOWDOWN, ULTRA_LCD) || defined(XY_FREQUENCY_LIMIT)
     // Segment time im micro seconds
     uint32_t segment_time_us = LROUND(1000000.0f / inverse_secs);
   #endif
@@ -2172,7 +2172,7 @@ bool Planner::_populate_block(block_t * const block, bool split_move,
   // Calculate and limit speed in mm/sec for each axis
   float current_speed[NUM_AXIS], speed_factor = 1.0f; // factor <1 decreases speed
   LOOP_XYZE(i) {
-    #if ENABLED(MIXING_EXTRUDER) && ENABLED(RETRACT_SYNC_MIXING)
+    #if BOTH(MIXING_EXTRUDER, RETRACT_SYNC_MIXING)
       // In worst case, only one extruder running, no change is needed.
       // In best case, all extruders run the same amount, we can divide by MIXING_STEPPERS
       float delta_mm_i = 0;
@@ -2485,7 +2485,7 @@ bool Planner::_populate_block(block_t * const block, bool split_move,
     float safe_speed = nominal_speed;
 
     uint8_t limited = 0;
-    #if ENABLED(JUNCTION_DEVIATION) && ENABLED(LIN_ADVANCE)
+    #if BOTH(JUNCTION_DEVIATION, LIN_ADVANCE)
       LOOP_XYZ(i)
     #else
       LOOP_XYZE(i)
@@ -2522,7 +2522,7 @@ bool Planner::_populate_block(block_t * const block, bool split_move,
 
       // Now limit the jerk in all axes.
       const float smaller_speed_factor = vmax_junction / previous_nominal_speed;
-      #if ENABLED(JUNCTION_DEVIATION) && ENABLED(LIN_ADVANCE)
+      #if BOTH(JUNCTION_DEVIATION, LIN_ADVANCE)
         LOOP_XYZ(axis)
       #else
         LOOP_XYZE(axis)
@@ -2893,7 +2893,7 @@ void Planner::reset_acceleration_rates() {
     if (AXIS_CONDITION) NOLESS(highest_rate, max_acceleration_steps_per_s2[i]);
   }
   cutoff_long = 4294967295UL / highest_rate; // 0xFFFFFFFFUL
-  #if ENABLED(JUNCTION_DEVIATION) && ENABLED(LIN_ADVANCE)
+  #if BOTH(JUNCTION_DEVIATION, LIN_ADVANCE)
     recalculate_max_e_jerk();
   #endif
 }

Marlin/src/module/planner.h

@@ -159,7 +159,7 @@ typedef struct block_t {
 
 } block_t;
 
-#define HAS_POSITION_FLOAT (ENABLED(LIN_ADVANCE) || ENABLED(SCARA_FEEDRATE_SCALING) || ENABLED(GRADIENT_MIX))
+#define HAS_POSITION_FLOAT ANY(LIN_ADVANCE, SCARA_FEEDRATE_SCALING, GRADIENT_MIX)
 
 #define BLOCK_MOD(n) ((n)&(BLOCK_BUFFER_SIZE-1))
 
@@ -253,7 +253,7 @@ class Planner {
 
     #if HAS_CLASSIC_JERK
       static float max_jerk[
-        #if ENABLED(JUNCTION_DEVIATION) && ENABLED(LIN_ADVANCE)
+        #if BOTH(JUNCTION_DEVIATION, LIN_ADVANCE)
           XYZ                                    // (mm/s^2) M205 XYZ - The largest speed change requiring no acceleration.
         #else
           XYZE                                   // (mm/s^2) M205 XYZE - The largest speed change requiring no acceleration.
@@ -861,7 +861,7 @@ class Planner {
       static void autotemp_M104_M109();
     #endif
 
-    #if ENABLED(JUNCTION_DEVIATION) && ENABLED(LIN_ADVANCE)
+    #if BOTH(JUNCTION_DEVIATION, LIN_ADVANCE)
       FORCE_INLINE static void recalculate_max_e_jerk() {
         #define GET_MAX_E_JERK(N) SQRT(SQRT(0.5) * junction_deviation_mm * (N) * RECIPROCAL(1.0 - SQRT(0.5)))
         #if ENABLED(DISTINCT_E_FACTORS)

Marlin/src/module/printcounter.h

@@ -28,7 +28,7 @@
 // Print debug messages with M111 S2
 //#define DEBUG_PRINTCOUNTER
 
-#if ENABLED(I2C_EEPROM) || ENABLED(SPI_EEPROM)
+#if EITHER(I2C_EEPROM, SPI_EEPROM)
   // round up address to next page boundary (assuming 32 byte pages)
   #define STATS_EEPROM_ADDRESS 0x40
 #else
@@ -57,7 +57,7 @@ class PrintCounter: public Stopwatch {
   private:
     typedef Stopwatch super;
 
-    #if ENABLED(I2C_EEPROM) || ENABLED(SPI_EEPROM) || defined(CPU_32_BIT)
+    #if EITHER(I2C_EEPROM, SPI_EEPROM) || defined(CPU_32_BIT)
       typedef uint32_t eeprom_address_t;
     #else
       typedef uint16_t eeprom_address_t;

Marlin/src/module/probe.cpp

@@ -38,7 +38,7 @@
 #include "../gcode/gcode.h"
 #include "../lcd/ultralcd.h"
 
-#if ENABLED(BLTOUCH) || ENABLED(Z_PROBE_SLED) || ENABLED(Z_PROBE_ALLEN_KEY) || ENABLED(PROBE_TRIGGERED_WHEN_STOWED_TEST) || (QUIET_PROBING && ENABLED(PROBING_STEPPERS_OFF))
+#if ANY(Z_PROBE_SLED, Z_PROBE_ALLEN_KEY, PROBE_TRIGGERED_WHEN_STOWED_TEST) || (QUIET_PROBING && ENABLED(PROBING_STEPPERS_OFF))
   #include "../Marlin.h" // for stop(), disable_e_steppers
 #endif
 
@@ -416,7 +416,7 @@ bool set_probe_deployed(const bool deploy) {
   if (deploy_stow_condition && unknown_condition)
     do_probe_raise(MAX(Z_CLEARANCE_BETWEEN_PROBES, Z_CLEARANCE_DEPLOY_PROBE));
 
-  #if ENABLED(Z_PROBE_SLED) || ENABLED(Z_PROBE_ALLEN_KEY)
+  #if EITHER(Z_PROBE_SLED, Z_PROBE_ALLEN_KEY)
     #if ENABLED(Z_PROBE_SLED)
       #define _AUE_ARGS true, false, false
     #else
@@ -553,7 +553,7 @@ static bool do_probe_move(const float z, const float fr_mm_s) {
 
   // Check to see if the probe was triggered
   const bool probe_triggered =
-    #if ENABLED(DELTA) && ENABLED(SENSORLESS_PROBING)
+    #if BOTH(DELTA, SENSORLESS_PROBING)
       endstops.trigger_state() & (_BV(X_MIN) | _BV(Y_MIN) | _BV(Z_MIN))
     #else
       TEST(endstops.trigger_state(),

Marlin/src/module/stepper.cpp

@@ -153,7 +153,7 @@ bool Stepper::abort_current_block;
 #if Z_MULTI_ENDSTOPS || ENABLED(Z_STEPPER_AUTO_ALIGN)
   bool Stepper::locked_Z_motor = false, Stepper::locked_Z2_motor = false;
 #endif
-#if ENABLED(Z_TRIPLE_ENDSTOPS) || (ENABLED(Z_STEPPER_AUTO_ALIGN) && ENABLED(Z_TRIPLE_STEPPER_DRIVERS))
+#if ENABLED(Z_TRIPLE_ENDSTOPS) || BOTH(Z_STEPPER_AUTO_ALIGN, Z_TRIPLE_STEPPER_DRIVERS)
   bool Stepper::locked_Z3_motor = false;
 #endif
 
@@ -1450,7 +1450,7 @@ void Stepper::stepper_pulse_phase_isr() {
 
     // Pulse Extruders
     // Tick the E axis, correct error term and update position
-    #if ENABLED(LIN_ADVANCE) || ENABLED(MIXING_EXTRUDER)
+    #if EITHER(LIN_ADVANCE, MIXING_EXTRUDER)
       delta_error[E_AXIS] += advance_dividend[E_AXIS];
       if (delta_error[E_AXIS] >= 0) {
         count_position[E_AXIS] += count_direction[E_AXIS];
@@ -1679,7 +1679,7 @@ uint32_t Stepper::stepper_block_phase_isr() {
          * If DeltaA == -DeltaB, the movement is only in the 2nd axis (Y or Z, handled below)
          * If DeltaA ==  DeltaB, the movement is only in the 1st axis (X)
          */
-        #if ENABLED(COREXY) || ENABLED(COREXZ)
+        #if EITHER(COREXY, COREXZ)
           #define X_CMP ==
         #else
           #define X_CMP !=
@@ -1697,7 +1697,7 @@ uint32_t Stepper::stepper_block_phase_isr() {
          * If DeltaA ==  DeltaB, the movement is only in the 1st axis (X or Y)
          * If DeltaA == -DeltaB, the movement is only in the 2nd axis (Y or Z)
          */
-        #if ENABLED(COREYX) || ENABLED(COREYZ)
+        #if EITHER(COREYX, COREYZ)
           #define Y_CMP ==
         #else
           #define Y_CMP !=
@@ -1715,7 +1715,7 @@ uint32_t Stepper::stepper_block_phase_isr() {
          * If DeltaA ==  DeltaB, the movement is only in the 1st axis (X or Y, already handled above)
          * If DeltaA == -DeltaB, the movement is only in the 2nd axis (Z)
          */
-        #if ENABLED(COREZX) || ENABLED(COREZY)
+        #if EITHER(COREZX, COREZY)
           #define Z_CMP ==
         #else
           #define Z_CMP !=
@@ -2030,7 +2030,7 @@ void Stepper::init() {
   #if HAS_X_ENABLE
     X_ENABLE_INIT;
     if (!X_ENABLE_ON) X_ENABLE_WRITE(HIGH);
-    #if (ENABLED(DUAL_X_CARRIAGE) || ENABLED(X_DUAL_STEPPER_DRIVERS)) && HAS_X2_ENABLE
+    #if EITHER(DUAL_X_CARRIAGE, X_DUAL_STEPPER_DRIVERS) && HAS_X2_ENABLE
       X2_ENABLE_INIT;
       if (!X_ENABLE_ON) X2_ENABLE_WRITE(HIGH);
     #endif
@@ -2093,7 +2093,7 @@ void Stepper::init() {
 
   // Init Step Pins
   #if HAS_X_STEP
-    #if ENABLED(X_DUAL_STEPPER_DRIVERS) || ENABLED(DUAL_X_CARRIAGE)
+    #if EITHER(X_DUAL_STEPPER_DRIVERS, DUAL_X_CARRIAGE)
       X2_STEP_INIT;
       X2_STEP_WRITE(INVERT_X_STEP_PIN);
     #endif
@@ -2467,13 +2467,13 @@ void Stepper::report_positions() {
     if (!initialized) return;
     LOOP_L_N(i, COUNT(motor_current_setting)) {
       switch (i) {
-        #if PIN_EXISTS(MOTOR_CURRENT_PWM_XY) || PIN_EXISTS(MOTOR_CURRENT_PWM_X) || PIN_EXISTS(MOTOR_CURRENT_PWM_Y)
+        #if ANY_PIN(MOTOR_CURRENT_PWM_XY, MOTOR_CURRENT_PWM_X, MOTOR_CURRENT_PWM_Y)
           case 0:
         #endif
         #if PIN_EXISTS(MOTOR_CURRENT_PWM_Z)
           case 1:
         #endif
-        #if PIN_EXISTS(MOTOR_CURRENT_PWM_E) || PIN_EXISTS(MOTOR_CURRENT_PWM_E0) || PIN_EXISTS(MOTOR_CURRENT_PWM_E1)
+        #if ANY_PIN(MOTOR_CURRENT_PWM_E, MOTOR_CURRENT_PWM_E0, MOTOR_CURRENT_PWM_E1)
           case 2:
         #endif
             digipot_current(i, motor_current_setting[i]);

Marlin/src/module/stepper.h

@@ -267,7 +267,7 @@ class Stepper {
     #if Z_MULTI_ENDSTOPS || ENABLED(Z_STEPPER_AUTO_ALIGN)
       static bool locked_Z_motor, locked_Z2_motor;
     #endif
-    #if ENABLED(Z_TRIPLE_ENDSTOPS) || (ENABLED(Z_STEPPER_AUTO_ALIGN) && ENABLED(Z_TRIPLE_STEPPER_DRIVERS))
+    #if ENABLED(Z_TRIPLE_ENDSTOPS) || BOTH(Z_STEPPER_AUTO_ALIGN, Z_TRIPLE_STEPPER_DRIVERS)
       static bool locked_Z3_motor;
     #endif
 
@@ -423,7 +423,7 @@ class Stepper {
       FORCE_INLINE static void set_z_lock(const bool state) { locked_Z_motor = state; }
       FORCE_INLINE static void set_z2_lock(const bool state) { locked_Z2_motor = state; }
     #endif
-    #if ENABLED(Z_TRIPLE_ENDSTOPS) || (ENABLED(Z_STEPPER_AUTO_ALIGN) && ENABLED(Z_TRIPLE_STEPPER_DRIVERS))
+    #if ENABLED(Z_TRIPLE_ENDSTOPS) || BOTH(Z_STEPPER_AUTO_ALIGN, Z_TRIPLE_STEPPER_DRIVERS)
       FORCE_INLINE static void set_z3_lock(const bool state) { locked_Z3_motor = state; }
     #endif
 

Marlin/src/module/stepper_indirection.h

@@ -618,7 +618,7 @@ void reset_stepper_drivers();    // Called by settings.load / settings.reset
     #define    _REV_E_DIR(E)   do{ if (E == 0) { E0_DIR_WRITE( INVERT_E0_DIR); } else { E1_DIR_WRITE( INVERT_E1_DIR); } }while(0)
   #endif
 
-  #if ENABLED(DUAL_X_CARRIAGE) || ENABLED(MULTI_NOZZLE_DUPLICATION)
+  #if EITHER(DUAL_X_CARRIAGE, MULTI_NOZZLE_DUPLICATION)
 
     #define NDIR(N) _DUPE(DIR,!INVERT_E##N##_DIR)
     #define RDIR(N) _DUPE(DIR, INVERT_E##N##_DIR)

Marlin/src/module/temperature.cpp

@@ -33,13 +33,13 @@
 #include "../core/language.h"
 #include "../HAL/shared/Delay.h"
 
-#define MAX6675_SEPARATE_SPI (ENABLED(HEATER_0_USES_MAX6675) || ENABLED(HEATER_1_USES_MAX6675)) && PIN_EXISTS(MAX6675_SCK) && PIN_EXISTS(MAX6675_DO)
+#define MAX6675_SEPARATE_SPI EITHER(HEATER_0_USES_MAX6675, HEATER_1_USES_MAX6675) && PIN_EXISTS(MAX6675_SCK, MAX6675_DO)
 
 #if MAX6675_SEPARATE_SPI
   #include "../libs/private_spi.h"
 #endif
 
-#if ENABLED(BABYSTEPPING) || ENABLED(PID_EXTRUSION_SCALING)
+#if EITHER(BABYSTEPPING, PID_EXTRUSION_SCALING)
   #include "stepper.h"
 #endif
 
@@ -360,8 +360,8 @@ temp_range_t Temperature::temp_range[HOTENDS] = ARRAY_BY_HOTENDS(sensor_heater_0
     #endif
 
     #if WATCH_BED || WATCH_HOTENDS
-      #define HAS_TP_BED (ENABLED(THERMAL_PROTECTION_BED) && ENABLED(PIDTEMPBED))
+      #define HAS_TP_BED BOTH(THERMAL_PROTECTION_BED, PIDTEMPBED)
-      #if HAS_TP_BED && ENABLED(THERMAL_PROTECTION_HOTENDS) && ENABLED(PIDTEMP)
+      #if HAS_TP_BED && BOTH(THERMAL_PROTECTION_HOTENDS, PIDTEMP)
         #define GTV(B,H) (heater < 0 ? (B) : (H))
       #elif HAS_TP_BED
         #define GTV(B,H) (B)
@@ -913,7 +913,7 @@ void Temperature::manage_heater() {
     }
   #endif
 
-  #if ENABLED(PROBING_HEATERS_OFF) && ENABLED(BED_LIMIT_SWITCHING)
+  #if BOTH(PROBING_HEATERS_OFF, BED_LIMIT_SWITCHING)
     static bool last_pause_state;
   #endif
 
@@ -1004,12 +1004,12 @@ void Temperature::manage_heater() {
 
     #if DISABLED(PIDTEMPBED)
       if (PENDING(ms, next_bed_check_ms)
-        #if ENABLED(PROBING_HEATERS_OFF) && ENABLED(BED_LIMIT_SWITCHING)
+        #if BOTH(PROBING_HEATERS_OFF, BED_LIMIT_SWITCHING)
           && paused == last_pause_state
         #endif
       ) return;
       next_bed_check_ms = ms + BED_CHECK_INTERVAL;
-      #if ENABLED(PROBING_HEATERS_OFF) && ENABLED(BED_LIMIT_SWITCHING)
+      #if BOTH(PROBING_HEATERS_OFF, BED_LIMIT_SWITCHING)
         last_pause_state = paused;
       #endif
     #endif
@@ -1334,7 +1334,7 @@ void Temperature::init() {
   #endif
 
   #if MB(RUMBA)
-    #define _AD(N) (ENABLED(HEATER_##N##_USES_AD595) || ENABLED(HEATER_##N##_USES_AD8495))
+    #define _AD(N) (ANY(HEATER_##N##_USES_AD595, HEATER_##N##_USES_AD8495))
     #if _AD(0) || _AD(1) || _AD(2) || _AD(3) || _AD(4) || _AD(5) || _AD(BED) || _AD(CHAMBER)
       // Disable RUMBA JTAG in case the thermocouple extension is plugged on top of JTAG connector
       MCUCR = _BV(JTD);
@@ -1342,7 +1342,7 @@ void Temperature::init() {
     #endif
   #endif
 
-  #if ENABLED(PIDTEMP) && ENABLED(PID_EXTRUSION_SCALING)
+  #if BOTH(PIDTEMP, PID_EXTRUSION_SCALING)
     last_e_position = 0;
   #endif
 
@@ -2743,7 +2743,7 @@ void Temperature::isr() {
   //
 
   #if ENABLED(BABYSTEPPING)
-    #if ENABLED(BABYSTEP_XY) || ENABLED(I2C_POSITION_ENCODERS)
+    #if EITHER(BABYSTEP_XY, I2C_POSITION_ENCODERS)
       LOOP_XYZ(axis) {
         const int16_t curTodo = babystepsTodo[axis]; // get rid of volatile for performance
         if (curTodo) {
@@ -2942,7 +2942,7 @@ void Temperature::isr() {
 
   #endif // AUTO_REPORT_TEMPERATURES
 
-  #if ENABLED(ULTRA_LCD) || ENABLED(EXTENSIBLE_UI)
+  #if EITHER(ULTRA_LCD, EXTENSIBLE_UI)
     void Temperature::set_heating_message(const uint8_t e) {
       const bool heating = isHeatingHotend(e);
       #if HOTENDS > 1

Marlin/src/module/temperature.h

@@ -739,7 +739,7 @@ class Temperature {
       #endif
     #endif
 
-    #if ENABLED(ULTRA_LCD) || ENABLED(EXTENSIBLE_UI)
+    #if EITHER(ULTRA_LCD, EXTENSIBLE_UI)
       static void set_heating_message(const uint8_t e);
     #endif
 
@@ -778,9 +778,9 @@ class Temperature {
 
     static void updateTemperaturesFromRawValues();
 
-    #define HAS_MAX6675 (ENABLED(HEATER_0_USES_MAX6675) || ENABLED(HEATER_1_USES_MAX6675))
+    #define HAS_MAX6675 EITHER(HEATER_0_USES_MAX6675, HEATER_1_USES_MAX6675)
     #if HAS_MAX6675
-      #if ENABLED(HEATER_0_USES_MAX6675) && ENABLED(HEATER_1_USES_MAX6675)
+      #if BOTH(HEATER_0_USES_MAX6675, HEATER_1_USES_MAX6675)
         #define COUNT_6675 2
       #else
         #define COUNT_6675 1

Marlin/src/module/tool_change.cpp

@@ -49,7 +49,7 @@
   #include "../gcode/gcode.h" // for dwell()
 #endif
 
-#if ENABLED(SWITCHING_EXTRUDER) || ENABLED(SWITCHING_NOZZLE) || ENABLED(SWITCHING_TOOLHEAD)
+#if ANY(SWITCHING_EXTRUDER, SWITCHING_NOZZLE, SWITCHING_TOOLHEAD)
   #include "servo.h"
 #endif
 
@@ -740,7 +740,7 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
           singlenozzle_temp[active_extruder] = thermalManager.temp_hotend[0].target;
           if (singlenozzle_temp[tmp_extruder] && singlenozzle_temp[tmp_extruder] != singlenozzle_temp[active_extruder]) {
             thermalManager.setTargetHotend(singlenozzle_temp[tmp_extruder], 0);
-            #if ENABLED(ULTRA_LCD) || ENABLED(EXTENSIBLE_UI)
+            #if EITHER(ULTRA_LCD, EXTENSIBLE_UI)
               thermalManager.set_heating_message(0);
             #endif
             (void)thermalManager.wait_for_hotend(0, false);  // Wait for heating or cooling

Marlin/src/pins/pins.h

@@ -874,7 +874,7 @@
 #define _EPIN(p,q) __EPIN(p,q)
 
 // The X2 axis, if any, should be the next open extruder port
-#if ENABLED(DUAL_X_CARRIAGE) || ENABLED(X_DUAL_STEPPER_DRIVERS)
+#if EITHER(DUAL_X_CARRIAGE, X_DUAL_STEPPER_DRIVERS)
   #ifndef X2_STEP_PIN
     #define X2_STEP_PIN   _EPIN(E_STEPPERS, STEP)
     #define X2_DIR_PIN    _EPIN(E_STEPPERS, DIR)

Marlin/src/pins/pins_3DRAG.h

@@ -75,7 +75,7 @@
 //
 // LCD / Controller
 //
-#if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)
+#if BOTH(ULTRA_LCD, NEWPANEL)
   #undef BEEPER_PIN
 
   #undef LCD_PINS_RS
@@ -154,7 +154,7 @@
     #define SPINDLE_LASER_PWM_PIN    46   // MUST BE HARDWARE PWM
     #define SPINDLE_LASER_ENABLE_PIN 62   // Pin should have a pullup!
     #define SPINDLE_DIR_PIN          48
-  #elif !(ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)) // use expansion header if no LCD in use
+  #elif !BOTH(ULTRA_LCD, NEWPANEL)     // use expansion header if no LCD in use
     #define SPINDLE_LASER_ENABLE_PIN 16   // Pin should have a pullup/pulldown!
     #define SPINDLE_DIR_PIN          17
   #endif

Marlin/src/pins/pins_ANET_10.h

@@ -162,7 +162,7 @@
     #define LCD_PINS_D6      16
     #define LCD_PINS_D7      17
     #define ADC_KEYPAD_PIN    1
-  #elif ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) || ENABLED(ANET_FULL_GRAPHICS_LCD)
+  #elif EITHER(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER, ANET_FULL_GRAPHICS_LCD)
     // Pin definitions for the Anet A6 Full Graphics display and the RepRapDiscount Full Graphics
     // display using an adapter board  // https://go.aisler.net/benlye/anet-lcd-adapter/pcb
     // See below for alternative pin definitions for use with https://www.thingiverse.com/thing:2103748

Marlin/src/pins/pins_AZTEEG_X3.h

@@ -53,7 +53,7 @@
 #undef STAT_LED_RED_PIN
 #undef STAT_LED_BLUE_PIN
 
-#if ENABLED(VIKI2) || ENABLED(miniVIKI)
+#if ANY(VIKI2, miniVIKI)
 
   #undef DOGLCD_A0
   #undef DOGLCD_CS
@@ -75,7 +75,7 @@
 //
 // Misc
 //
-#if ENABLED(CASE_LIGHT_ENABLE)  && PIN_EXISTS(CASE_LIGHT) && PIN_EXISTS(STAT_LED_RED) && STAT_LED_RED_PIN == CASE_LIGHT_PIN
+#if ENABLED(CASE_LIGHT_ENABLE) && PIN_EXISTS(CASE_LIGHT, STAT_LED_RED) && STAT_LED_RED_PIN == CASE_LIGHT_PIN
   #undef STAT_LED_RED_PIN
 #endif
 

Marlin/src/pins/pins_AZTEEG_X3_PRO.h

@@ -139,7 +139,7 @@
 #undef BEEPER_PIN
 #define BEEPER_PIN         33
 
-#if ENABLED(VIKI2) || ENABLED(miniVIKI)
+#if ANY(VIKI2, miniVIKI)
   #undef SD_DETECT_PIN
   #define SD_DETECT_PIN    49   // For easy adapter board
   #undef BEEPER_PIN
@@ -152,7 +152,7 @@
 //
 // Misc. Functions
 //
-#if ENABLED(CASE_LIGHT_ENABLE)  && PIN_EXISTS(CASE_LIGHT) && defined(DOGLCD_A0) && DOGLCD_A0 == CASE_LIGHT_PIN
+#if ENABLED(CASE_LIGHT_ENABLE) && PIN_EXISTS(CASE_LIGHT) && defined(DOGLCD_A0) && DOGLCD_A0 == CASE_LIGHT_PIN
   #undef DOGLCD_A0              // Steal pin 44 for the case light; if you have a Viki2 and have connected it
   #define DOGLCD_A0        57   // following the Panucatt wiring diagram, you may need to tweak these pin assignments
                                 // as the wiring diagram uses pin 44 for DOGLCD_A0
@@ -166,7 +166,7 @@
 #undef SPINDLE_DIR_PIN
 
 #if ENABLED(SPINDLE_LASER_ENABLE)   // EXP2 header
-  #if ENABLED(VIKI2) || ENABLED(miniVIKI)
+  #if ANY(VIKI2, miniVIKI)
     #undef BTN_EN2
     #define BTN_EN2             31   // need 7 for the spindle speed PWM
   #endif

Marlin/src/pins/pins_AZTEEG_X5_GT.h

@@ -112,7 +112,7 @@
 // Display
 //
 
-#if ENABLED(VIKI2) || ENABLED(miniVIKI)
+#if ANY(VIKI2, miniVIKI)
   #define BEEPER_PIN       P1_31
   #define DOGLCD_A0        P2_06
   #define DOGLCD_CS        P0_16

Marlin/src/pins/pins_AZTEEG_X5_MINI_WIFI.h

@@ -143,7 +143,7 @@
       //#define SHIFT_EN   P1_22   // (41)  J5-4 & AUX-4
     #endif
 
-    #if ENABLED(VIKI2) || ENABLED(miniVIKI)
+    #if ANY(VIKI2, miniVIKI)
       //#define LCD_SCREEN_ROT_180
 
       #define BEEPER_PIN   P1_30   // (37) may change if cable changes

Marlin/src/pins/pins_BEAST.h

@@ -126,7 +126,7 @@
     #define LCD_PINS_RS         49   // CS chip select /SS chip slave select
     #define LCD_PINS_ENABLE     51   // SID (MOSI)
     #define LCD_PINS_D4         52   // SCK (CLK) clock
-  #elif ENABLED(NEWPANEL) && ENABLED(PANEL_ONE)
+  #elif BOTH(NEWPANEL, PANEL_ONE)
     #define LCD_PINS_RS         PB8
     #define LCD_PINS_ENABLE     PD2
     #define LCD_PINS_D4         PB12
@@ -193,7 +193,7 @@
       #define LCD_SDSS          53
       #define SD_DETECT_PIN     49
 
-    #elif ENABLED(VIKI2) || ENABLED(miniVIKI)
+    #elif ANY(VIKI2, miniVIKI)
 
       #define BEEPER_PIN        33
 

Marlin/src/pins/pins_CHITU3D.h

@@ -125,7 +125,7 @@
     #define LCD_PINS_RS         49   // CS chip select /SS chip slave select
     #define LCD_PINS_ENABLE     51   // SID (MOSI)
     #define LCD_PINS_D4         52   // SCK (CLK) clock
-  #elif ENABLED(NEWPANEL) && ENABLED(PANEL_ONE)
+  #elif BOTH(NEWPANEL, PANEL_ONE)
     #define LCD_PINS_RS         PB8
     #define LCD_PINS_ENABLE     PD2
     #define LCD_PINS_D4         PB12
@@ -192,7 +192,7 @@
       #define LCD_SDSS          53
       #define SD_DETECT_PIN     49
 
-    #elif ENABLED(VIKI2) || ENABLED(miniVIKI)
+    #elif ANY(VIKI2, miniVIKI)
 
       #define BEEPER_PIN        33
 

Marlin/src/pins/pins_FELIX2.h

@@ -49,7 +49,7 @@
 //
 // LCD / Controller
 //
-#if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)
+#if BOTH(ULTRA_LCD, NEWPANEL)
 
   #define SD_DETECT_PIN     6
 

Marlin/src/pins/pins_FORMBOT_RAPTOR2.h

@@ -35,9 +35,7 @@
   #define FIL_RUNOUT_PIN   22
 #endif
 
-#define GREEDY_PANEL (   ENABLED(PANEL_ONE) || ENABLED(VIKI2)     \
+#define GREEDY_PANEL ANY(PANEL_ONE, VIKI2, miniVIKI, MINIPANEL, REPRAPWORLD_KEYPAD)
-                      || ENABLED(miniVIKI)  || ENABLED(MINIPANEL) \
-                      || ENABLED(REPRAPWORLD_KEYPAD) )
 
 //
 // M3/M4/M5 - Spindle/Laser Control

Marlin/src/pins/pins_MEGATRONICS.h

@@ -104,7 +104,7 @@
 //
 #define BEEPER_PIN         33
 
-#if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)
+#if BOTH(ULTRA_LCD, NEWPANEL)
 
   #define LCD_PINS_RS     16
   #define LCD_PINS_ENABLE 17

Marlin/src/pins/pins_MIGHTYBOARD_REVE.h

@@ -175,9 +175,9 @@
 #endif
 
 #ifndef FAN_PIN
-  #if ENABLED(IS_EFB) || ENABLED(IS_EFF)       // Hotend, Fan, Bed or Hotend, Fan, Fan
+  #if EITHER(IS_EFB, IS_EFF)                      // Hotend, Fan, Bed or Hotend, Fan, Fan
     #define FAN_PIN        EX2_HEAT_PIN
-  #elif ENABLED(IS_EEF) || ENABLED(IS_SF)      // Hotend, Hotend, Fan or Spindle, Fan
+  #elif EITHER(IS_EEF, IS_SF)                     // Hotend, Hotend, Fan or Spindle, Fan
     #define FAN_PIN        HBP_PIN
   #else
     #define FAN_PIN        EXTRA_FET_PIN

Marlin/src/pins/pins_MKS_GEN_13.h

@@ -56,7 +56,7 @@
 //
 // LCD / Controller
 //
-#if ENABLED(VIKI2) || ENABLED(miniVIKI)
+#if ANY(VIKI2, miniVIKI)
   /**
    * VIKI2 Has two groups of wires with...
    *

Marlin/src/pins/pins_MKS_SBASE.h

@@ -245,7 +245,7 @@
   #define LCD_SDSS         P0_28   // EXP2.4
   #define LCD_PINS_ENABLE  P0_18   // EXP1.3
   #define LCD_PINS_D4      P0_15   // EXP1.5
-  #if ENABLED(VIKI2) || ENABLED(miniVIKI)
+  #if ANY(VIKI2, miniVIKI)
     #define DOGLCD_SCK     SCK_PIN
     #define DOGLCD_MOSI    MOSI_PIN
   #endif

Marlin/src/pins/pins_PRINTRBOARD.h

@@ -123,7 +123,7 @@
 //
 // LCD / Controller
 //
-#if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)
+#if BOTH(ULTRA_LCD, NEWPANEL)
 
   #define LCD_PINS_RS       9   // E1       JP11-11
   #define LCD_PINS_ENABLE   8   // E0       JP11-10
@@ -132,7 +132,7 @@
   #define LCD_PINS_D6       5   // D5       JP11-6
   #define LCD_PINS_D7       4   // D4       JP11-5
 
-  #if ENABLED(VIKI2) || ENABLED(miniVIKI)
+  #if ANY(VIKI2, miniVIKI)
     #define BEEPER_PIN      8   // E0       JP11-10
 
     #define DOGLCD_A0      40   // F2       JP2-2

Marlin/src/pins/pins_PRINTRBOARD_REVF.h

@@ -208,7 +208,7 @@
   #define LCD_PINS_D6       5   // D5       JP11-6
   #define LCD_PINS_D7       4   // D4       JP11-5
 
-  #if ENABLED(VIKI2) || ENABLED(miniVIKI)
+  #if ANY(VIKI2, miniVIKI)
 
     #define BEEPER_PIN      8   // E0       JP11-10
     #define DOGLCD_A0      40   // F2       JP2-2

Marlin/src/pins/pins_RAMBO.h

@@ -175,7 +175,7 @@
     #define LCD_PINS_D6     74
     #define LCD_PINS_D7     75
 
-    #if ENABLED(VIKI2) || ENABLED(miniVIKI)
+    #if ANY(VIKI2, miniVIKI)
       #define BEEPER_PIN   44
       // NB: Panucatt's Viki 2.0 wiring diagram (v1.2) indicates that the
       //     beeper/buzzer is connected to pin 33; however, the pin used in the

Marlin/src/pins/pins_RAMPS.h

@@ -199,13 +199,13 @@
 #endif
 
 #ifndef FAN_PIN
-  #if ENABLED(IS_RAMPS_EFB) || ENABLED(IS_RAMPS_EFF)  // Hotend, Fan, Bed or Hotend, Fan, Fan
+  #if EITHER(IS_RAMPS_EFB, IS_RAMPS_EFF)          // Hotend, Fan, Bed or Hotend, Fan, Fan
     #define FAN_PIN        RAMPS_D9_PIN
-  #elif ENABLED(IS_RAMPS_EEF) || ENABLED(IS_RAMPS_SF) // Hotend, Hotend, Fan or Spindle, Fan
+  #elif EITHER(IS_RAMPS_EEF, IS_RAMPS_SF)         // Hotend, Hotend, Fan or Spindle, Fan
     #define FAN_PIN        RAMPS_D8_PIN
-  #elif ENABLED(IS_RAMPS_EEB)                         // Hotend, Hotend, Bed
+  #elif ENABLED(IS_RAMPS_EEB)                  // Hotend, Hotend, Bed
-    #define FAN_PIN         4   // IO pin. Buffer needed
+    #define FAN_PIN         4                  // IO pin. Buffer needed
-  #else                                               // Non-specific are "EFB" (i.e., "EFBF" or "EFBE")
+  #else                                        // Non-specific are "EFB" (i.e., "EFBF" or "EFBE")
     #define FAN_PIN        RAMPS_D9_PIN
   #endif
 #endif
@@ -232,8 +232,7 @@
 #if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN) && !defined(SPINDLE_LASER_ENABLE_PIN)
   #if NUM_SERVOS <= 1 // try to use servo connector first
     #define CASE_LIGHT_PIN    6   // MUST BE HARDWARE PWM
-  #elif !(ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL) \
+  #elif !(BOTH(ULTRA_LCD, NEWPANEL) && ANY(PANEL_ONE, VIKI2, miniVIKI, MINIPANEL, REPRAPWORLD_KEYPAD))  // try to use AUX 2
-      && (ENABLED(PANEL_ONE) || ENABLED(VIKI2) || ENABLED(miniVIKI) || ENABLED(MINIPANEL) || ENABLED(REPRAPWORLD_KEYPAD)))  // try to use AUX 2
     #define CASE_LIGHT_PIN   44   // MUST BE HARDWARE PWM
   #endif
 #endif
@@ -246,8 +245,7 @@
     #define SPINDLE_LASER_ENABLE_PIN  4   // Pin should have a pullup/pulldown!
     #define SPINDLE_LASER_PWM_PIN     6   // MUST BE HARDWARE PWM
     #define SPINDLE_DIR_PIN           5
-  #elif !(ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL) \
+  #elif !(BOTH(ULTRA_LCD, NEWPANEL) && ANY(PANEL_ONE, VIKI2, miniVIKI, MINIPANEL, REPRAPWORLD_KEYPAD))  // try to use AUX 2
-      && (ENABLED(PANEL_ONE) || ENABLED(VIKI2) || ENABLED(miniVIKI) || ENABLED(MINIPANEL) || ENABLED(REPRAPWORLD_KEYPAD)))  // try to use AUX 2
     #define SPINDLE_LASER_ENABLE_PIN 40   // Pin should have a pullup/pulldown!
     #define SPINDLE_LASER_PWM_PIN    44   // MUST BE HARDWARE PWM
     #define SPINDLE_DIR_PIN          65
@@ -347,7 +345,7 @@
     #define LCD_PINS_ENABLE     51   // SID (MOSI)
     #define LCD_PINS_D4         52   // SCK (CLK) clock
 
-  #elif ENABLED(NEWPANEL) && ENABLED(PANEL_ONE)
+  #elif BOTH(NEWPANEL, PANEL_ONE)
 
     #define LCD_PINS_RS         40
     #define LCD_PINS_ENABLE     42
@@ -379,7 +377,7 @@
 
     #else
 
-      #if ENABLED(MKS_12864OLED) || ENABLED(MKS_12864OLED_SSD1306)
+      #if EITHER(MKS_12864OLED, MKS_12864OLED_SSD1306)
         #define LCD_PINS_DC     25   // Set as output on init
         #define LCD_PINS_RS     27   // Pull low for 1s to init
         // DOGM SPI LCD Support
@@ -463,7 +461,7 @@
       #define LCD_SDSS          SDSS
       #define SD_DETECT_PIN     49
 
-    #elif ENABLED(VIKI2) || ENABLED(miniVIKI)
+    #elif ANY(VIKI2, miniVIKI)
 
       #define DOGLCD_CS         45
       #define DOGLCD_A0         44

Marlin/src/pins/pins_RAMPS_DUO.h

@@ -76,7 +76,7 @@
 //
 #if ENABLED(ULTRA_LCD)
 
-  #if ENABLED(NEWPANEL) && ENABLED(PANEL_ONE)
+  #if BOTH(NEWPANEL, PANEL_ONE)
     #undef LCD_PINS_D4
     #define LCD_PINS_D4  68
 

Marlin/src/pins/pins_RAMPS_FD_V1.h

@@ -161,7 +161,7 @@
     #define DOGLCD_A0      27
   #endif
 
-  #if ENABLED(VIKI2) || ENABLED(miniVIKI)
+  #if ANY(VIKI2, miniVIKI)
     #define DOGLCD_A0           16
     #define KILL_PIN            51
     #define STAT_LED_BLUE_PIN   29

Marlin/src/pins/pins_RAMPS_LINUX.h

@@ -220,8 +220,7 @@
 #if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN) && !defined(SPINDLE_LASER_ENABLE_PIN)
   #if NUM_SERVOS <= 1 // try to use servo connector first
     #define CASE_LIGHT_PIN    6   // MUST BE HARDWARE PWM
-  #elif !(ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL) \
+  #elif !(BOTH(ULTRA_LCD, NEWPANEL) && ANY(PANEL_ONE, VIKI2, miniVIKI, MINIPANEL, REPRAPWORLD_KEYPAD))  // try to use AUX 2
-      && (ENABLED(PANEL_ONE) || ENABLED(VIKI2) || ENABLED(miniVIKI) || ENABLED(MINIPANEL) || ENABLED(REPRAPWORLD_KEYPAD)))  // try to use AUX 2
     #define CASE_LIGHT_PIN   44   // MUST BE HARDWARE PWM
   #endif
 #endif
@@ -234,8 +233,7 @@
     #define SPINDLE_LASER_ENABLE_PIN  4   // Pin should have a pullup/pulldown!
     #define SPINDLE_LASER_PWM_PIN     6   // MUST BE HARDWARE PWM
     #define SPINDLE_DIR_PIN           5
-  #elif !(ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL) \
+  #elif !(BOTH(ULTRA_LCD, NEWPANEL) && ANY(PANEL_ONE, VIKI2, miniVIKI, MINIPANEL, REPRAPWORLD_KEYPAD))  // try to use AUX 2
-      && (ENABLED(PANEL_ONE) || ENABLED(VIKI2) || ENABLED(miniVIKI) || ENABLED(MINIPANEL) || ENABLED(REPRAPWORLD_KEYPAD)))  // try to use AUX 2
     #define SPINDLE_LASER_ENABLE_PIN 40   // Pin should have a pullup/pulldown!
     #define SPINDLE_LASER_PWM_PIN    44   // MUST BE HARDWARE PWM
     #define SPINDLE_DIR_PIN          65
@@ -335,7 +333,7 @@
     #define LCD_PINS_ENABLE     51   // SID (MOSI)
     #define LCD_PINS_D4         52   // SCK (CLK) clock
 
-  #elif ENABLED(NEWPANEL) && ENABLED(PANEL_ONE)
+  #elif BOTH(NEWPANEL, PANEL_ONE)
 
     #define LCD_PINS_RS         40
     #define LCD_PINS_ENABLE     42
@@ -367,7 +365,7 @@
 
     #else
 
-      #if ENABLED(MKS_12864OLED) || ENABLED(MKS_12864OLED_SSD1306)
+      #if EITHER(MKS_12864OLED, MKS_12864OLED_SSD1306)
         #define LCD_PINS_DC     25   // Set as output on init
         #define LCD_PINS_RS     27   // Pull low for 1s to init
         // DOGM SPI LCD Support
@@ -451,7 +449,7 @@
       #define LCD_SDSS          SDSS
       #define SD_DETECT_PIN     49
 
-    #elif ENABLED(VIKI2) || ENABLED(miniVIKI)
+    #elif ANY(VIKI2, miniVIKI)
 
       #define DOGLCD_CS         45
       #define DOGLCD_A0         44

Marlin/src/pins/pins_RAMPS_PLUS.h

@@ -73,7 +73,7 @@
 #undef E0_CS_PIN
 #undef E1_CS_PIN
 
-#if ENABLED(ULTRA_LCD) && DISABLED(REPRAPWORLD_GRAPHICAL_LCD) && (DISABLED(NEWPANEL) || DISABLED(PANEL_ONE)) && DISABLED(CR10_STOCKDISPLAY)
+#if ENABLED(ULTRA_LCD) && DISABLED(REPRAPWORLD_GRAPHICAL_LCD) && !BOTH(NEWPANEL, PANEL_ONE) && DISABLED(CR10_STOCKDISPLAY)
   #if DISABLED(MKS_12864OLED) || ENABLED(MKS_12864OLED_SSD1306)
     #undef LCD_PINS_RS
     #define LCD_PINS_RS     42   // 3DYMY boards pin 16 -> 42

Marlin/src/pins/pins_RAMPS_RE_ARM.h

@@ -173,13 +173,13 @@
 #endif
 
 #ifndef FAN_PIN
-  #if ENABLED(IS_RAMPS_EFB) || ENABLED(IS_RAMPS_EFF)   // Hotend, Fan, Bed or Hotend, Fan, Fan
+  #if EITHER(IS_RAMPS_EFB, IS_RAMPS_EFF)          // Hotend, Fan, Bed or Hotend, Fan, Fan
     #define FAN_PIN        RAMPS_D9_PIN
-  #elif ENABLED(IS_RAMPS_EEF) || ENABLED(IS_RAMPS_SF)  // Hotend, Hotend, Fan or Spindle, Fan
+  #elif EITHER(IS_RAMPS_EEF, IS_RAMPS_SF)         // Hotend, Hotend, Fan or Spindle, Fan
     #define FAN_PIN        RAMPS_D8_PIN
-  #elif ENABLED(IS_RAMPS_EEB)                          // Hotend, Hotend, Bed
+  #elif ENABLED(IS_RAMPS_EEB)                  // Hotend, Hotend, Bed
-    #define FAN_PIN        P1_18   // (4) IO pin. Buffer needed
+    #define FAN_PIN        P1_18               // (4) IO pin. Buffer needed
-  #else                                                // Non-specific are "EFB" (i.e., "EFBF" or "EFBE")
+  #else                                        // Non-specific are "EFB" (i.e., "EFBF" or "EFBE")
     #define FAN_PIN        RAMPS_D9_PIN
   #endif
 #endif
@@ -293,7 +293,7 @@
     //#define SHIFT_EN     P1_22   // (41)  J5-4 & AUX-4
   #endif
 
-  #if ENABLED(VIKI2) || ENABLED(miniVIKI)
+  #if ANY(VIKI2, miniVIKI)
     // #define LCD_SCREEN_ROT_180
 
     #define BTN_EN1        P3_26   // (31) J3-2 & AUX-4

Marlin/src/pins/pins_RUMBA.h

@@ -167,7 +167,7 @@
 //
 // LCD / Controller
 //
-#if ENABLED(MKS_12864OLED) || ENABLED(MKS_12864OLED_SSD1306)
+#if EITHER(MKS_12864OLED, MKS_12864OLED_SSD1306)
   #define LCD_PINS_DC      38   // Set as output on init
   #define LCD_PINS_RS      41   // Pull low for 1s to init
   // DOGM SPI LCD Support

Marlin/src/pins/pins_RURAMPS4D_11.h

@@ -202,7 +202,7 @@
 //
 #if ENABLED(ULTRA_LCD)
 
-  #if ENABLED(RADDS_DISPLAY) || ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
+  #if EITHER(RADDS_DISPLAY, REPRAP_DISCOUNT_SMART_CONTROLLER)
 
     #define BEEPER_PIN      62
 

Marlin/src/pins/pins_RURAMPS4D_13.h

@@ -188,7 +188,7 @@
 //
 #if ENABLED(ULTRA_LCD)
 
-  #if ENABLED(RADDS_DISPLAY) || ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
+  #if EITHER(RADDS_DISPLAY, REPRAP_DISCOUNT_SMART_CONTROLLER)
 
     #define BEEPER_PIN      62
 

Marlin/src/pins/pins_SANGUINOLOLU_11.h

@@ -137,7 +137,7 @@
   #define LCD_BACKLIGHT_PIN 17   // LCD backlight LED
 #endif
 
-#if DISABLED(SPINDLE_LASER_ENABLE) && ENABLED(SANGUINOLOLU_V_1_2) && !(ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL))  // try to use IO Header
+#if DISABLED(SPINDLE_LASER_ENABLE) && ENABLED(SANGUINOLOLU_V_1_2) && !BOTH(ULTRA_LCD, NEWPANEL)  // try to use IO Header
   #define CASE_LIGHT_PIN     4   // MUST BE HARDWARE PWM  - see if IO Header is available
 #endif
 
@@ -277,7 +277,7 @@
 // M3/M4/M5 - Spindle/Laser Control
 //
 #if ENABLED(SPINDLE_LASER_ENABLE)
-  #if !MB(AZTEEG_X1) && ENABLED(SANGUINOLOLU_V_1_2) && !(ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL))  // try to use IO Header
+  #if !MB(AZTEEG_X1) && ENABLED(SANGUINOLOLU_V_1_2) && !BOTH(ULTRA_LCD, NEWPANEL)  // try to use IO Header
 
     #define SPINDLE_LASER_ENABLE_PIN 10   // Pin should have a pullup/pulldown!
     #define SPINDLE_LASER_PWM_PIN     4   // MUST BE HARDWARE PWM

Marlin/src/pins/pins_SAV_MKI.h

@@ -161,7 +161,7 @@
   #define SR_CLK_PIN       EXT_AUX_SCL_D0
 #endif
 
-#if ENABLED(SAV_3DLCD) || ENABLED(SAV_3DGLCD)
+#if EITHER(SAV_3DLCD, SAV_3DGLCD)
 
   #define BTN_EN1          EXT_AUX_A1_IO
   #define BTN_EN2          EXT_AUX_A0_IO

Marlin/src/pins/pins_SCOOVO_X9H.h

@@ -144,7 +144,7 @@
 
 #define HOME_PIN           BTN_HOME
 
-#if ENABLED(VIKI2) || ENABLED(miniVIKI)
+#if ANY(VIKI2, miniVIKI)
   #define BEEPER_PIN       44
   // Pins for DOGM SPI LCD Support
   #define DOGLCD_A0        70

Marlin/src/pins/pins_SMOOTHIEBOARD.h

@@ -95,7 +95,7 @@
 //
 // LCD / Controller
 //
-#if ENABLED(VIKI2) || ENABLED(miniVIKI)
+#if ANY(VIKI2, miniVIKI)
 
   #define BEEPER_PIN       P1_31
   #define DOGLCD_A0        P2_11

Marlin/src/pins/pins_STM32F1R.h

@@ -105,7 +105,7 @@
     #define LCD_PINS_RS         49   // CS chip select /SS chip slave select
     #define LCD_PINS_ENABLE     51   // SID (MOSI)
     #define LCD_PINS_D4         52   // SCK (CLK) clock
-  #elif ENABLED(NEWPANEL) && ENABLED(PANEL_ONE)
+  #elif BOTH(NEWPANEL, PANEL_ONE)
     #define LCD_PINS_RS         PB8
     #define LCD_PINS_ENABLE     PD2
     #define LCD_PINS_D4         PB12
@@ -172,7 +172,7 @@
       #define LCD_SDSS          53
       #define SD_DETECT_PIN     49
 
-    #elif ENABLED(VIKI2) || ENABLED(miniVIKI)
+    #elif ANY(VIKI2, miniVIKI)
 
       #define BEEPER_PIN        33
 

Marlin/src/pins/pins_STM3R_MINI.h

@@ -120,7 +120,7 @@
     #define LCD_PINS_RS         49   // CS chip select /SS chip slave select
     #define LCD_PINS_ENABLE     51   // SID (MOSI)
     #define LCD_PINS_D4         52   // SCK (CLK) clock
-  #elif ENABLED(NEWPANEL) && ENABLED(PANEL_ONE)
+  #elif BOTH(NEWPANEL, PANEL_ONE)
     #define LCD_PINS_RS         PB8
     #define LCD_PINS_ENABLE     PD2
     #define LCD_PINS_D4         PB12
@@ -187,7 +187,7 @@
       #define LCD_SDSS          53
       #define SD_DETECT_PIN     49
 
-    #elif ENABLED(VIKI2) || ENABLED(miniVIKI)
+    #elif ANY(VIKI2, miniVIKI)
 
       #define BEEPER_PIN        33
 

Marlin/src/pins/pins_TEENSYLU.h

@@ -140,7 +140,7 @@
 //
 // LCD / Controller
 //
-#if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)
+#if BOTH(ULTRA_LCD, NEWPANEL)
 
   #define BEEPER_PIN       -1
 

Marlin/src/pins/pins_TRIGORILLA_14.h

@@ -74,14 +74,14 @@
 #if 0 && ENABLED(ULTRA_LCD)
 
   // LCD Display output pins
-  #if ENABLED(NEWPANEL) && ENABLED(PANEL_ONE)
+  #if BOTH(NEWPANEL, PANEL_ONE)
     #undef LCD_PINS_D6
     #define LCD_PINS_D6    57
   #endif
 
   // LCD Display input pins
   #if ENABLED(NEWPANEL)
-    #if ENABLED(VIKI2) || ENABLED(miniVIKI)
+    #if ANY(VIKI2, miniVIKI)
       #undef DOGLCD_A0
       #define DOGLCD_A0    23
     #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)

Marlin/src/pins/pins_ULTIMAKER_OLD.h

@@ -144,14 +144,15 @@
 //
 // LCD / Controller
 //
-#if ENABLED(board_rev_1_0) || ENABLED(board_rev_1_1_TO_1_3)
+#if ANY(board_rev_1_0, board_rev_1_1_TO_1_3)
   #define LCD_PINS_RS        24
   #define LCD_PINS_ENABLE    22
   #define LCD_PINS_D4        36
   #define LCD_PINS_D5        34
   #define LCD_PINS_D6        32
   #define LCD_PINS_D7        30
-#elif ENABLED(board_rev_1_5) && ENABLED(ULTRA_LCD)
+
+#elif ENABLED(board_rev_1_5, ULTRA_LCD)
 
   #define BEEPER_PIN 18
 

Marlin/src/pins/sensitive_pins.h

@@ -367,7 +367,7 @@
 // Chip Select and Digital Micro-stepping
 //
 
-#if ENABLED(DUAL_X_CARRIAGE) || ENABLED(X_DUAL_STEPPER_DRIVERS)
+#if EITHER(DUAL_X_CARRIAGE, X_DUAL_STEPPER_DRIVERS)
   #if PIN_EXISTS(X2_CS)
     #define _X2_CS X2_CS_PIN,
   #else

Marlin/src/sd/cardreader.cpp

@@ -900,12 +900,10 @@ void CardReader::setroot() {
       }
       else {
         sort_order[0] = 0;
-        #if ENABLED(SDSORT_USES_RAM) && ENABLED(SDSORT_CACHE_NAMES)
+        #if BOTH(SDSORT_USES_RAM, SDSORT_CACHE_NAMES)
           #if ENABLED(SDSORT_DYNAMIC_RAM)
             sortnames = new char*[1];
-            #if ENABLED(SDSORT_CACHE_NAMES)
+            sortshort = new char*[1];
-              sortshort = new char*[1];
-            #endif
             isDir = new uint8_t[1];
           #endif
           getfilename(0);
@@ -975,7 +973,7 @@ void CardReader::printingHasFinished() {
       presort();
     #endif
 
-    #if (ENABLED(ULTRA_LCD) || ENABLED(EXTENSIBLE_UI)) && ENABLED(LCD_SET_PROGRESS_MANUALLY)
+    #if EITHER(ULTRA_LCD, EXTENSIBLE_UI) && ENABLED(LCD_SET_PROGRESS_MANUALLY)
       ui.progress_bar_percent = 0;
     #endif
 

Marlin/src/sd/cardreader.h

@@ -25,7 +25,7 @@
 
 #if ENABLED(SDSUPPORT)
 
-#define SD_RESORT ENABLED(SDCARD_SORT_ALPHA) && ENABLED(SDSORT_DYNAMIC_RAM)
+#define SD_RESORT BOTH(SDCARD_SORT_ALPHA, SDSORT_DYNAMIC_RAM)
 
 #define MAX_DIR_DEPTH     10       // Maximum folder depth
 #define MAXDIRNAMELENGTH   8       // DOS folder name size
@@ -173,7 +173,7 @@ private:
       static uint8_t sort_order[SDSORT_LIMIT];
     #endif
 
-    #if ENABLED(SDSORT_USES_RAM) && ENABLED(SDSORT_CACHE_NAMES) && DISABLED(SDSORT_DYNAMIC_RAM)
+    #if BOTH(SDSORT_USES_RAM, SDSORT_CACHE_NAMES) && DISABLED(SDSORT_DYNAMIC_RAM)
       #define SORTED_LONGNAME_MAXLEN ((SDSORT_CACHE_VFATS) * (FILENAME_LENGTH) + 1)
     #else
       #define SORTED_LONGNAME_MAXLEN LONG_FILENAME_LENGTH

Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.cpp

@@ -31,7 +31,7 @@
 
 #include "Sd2Card_FlashDrive.h"
 
-#if ENABLED(ULTRA_LCD) || ENABLED(EXTENSIBLE_UI)
+#if EITHER(ULTRA_LCD, EXTENSIBLE_UI)
   #include "../../lcd/ultralcd.h"
 #endif
 
@@ -63,7 +63,7 @@ void Sd2Card::idle() {
       SERIAL_ECHOPGM("Starting USB host...");
       if (!usb.start()) {
         SERIAL_ECHOPGM(" Failed. Retrying in 2s.");
-        #if ENABLED(ULTRA_LCD) || ENABLED(EXTENSIBLE_UI)
+        #if EITHER(ULTRA_LCD, EXTENSIBLE_UI)
           LCD_MESSAGEPGM("USB start failed");
         #endif
         state = USB_HOST_DELAY_INIT;

config/default/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1015,7 +1015,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1108,7 +1108,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1134,7 +1134,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1203,7 +1203,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2037,7 +2037,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2066,7 +2066,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/default/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1654,7 +1654,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/3DFabXYZ/Migbot/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1021,7 +1021,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1114,7 +1114,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1140,7 +1140,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1209,7 +1209,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2068,7 +2068,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 50
   #define RGB_LED_G_PIN 51
   #define RGB_LED_B_PIN 52
@@ -2097,7 +2097,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/3DFabXYZ/Migbot/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1654,7 +1654,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/AlephObjects/TAZ4/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1035,7 +1035,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1128,7 +1128,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1154,7 +1154,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1223,7 +1223,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2057,7 +2057,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2086,7 +2086,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/AlephObjects/TAZ4/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1654,7 +1654,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/AliExpress/CL-260/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1015,7 +1015,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1108,7 +1108,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1134,7 +1134,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1203,7 +1203,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2037,7 +2037,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2066,7 +2066,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/AliExpress/UM2pExt/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1026,7 +1026,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   #define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1119,7 +1119,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1145,7 +1145,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1214,7 +1214,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2048,7 +2048,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2077,7 +2077,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/AliExpress/UM2pExt/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1656,7 +1656,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/Anet/A2/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1015,7 +1015,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1108,7 +1108,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1134,7 +1134,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1203,7 +1203,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2039,7 +2039,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2068,7 +2068,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/Anet/A2/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1654,7 +1654,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/Anet/A2plus/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1015,7 +1015,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1108,7 +1108,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1134,7 +1134,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1203,7 +1203,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2039,7 +2039,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2068,7 +2068,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/Anet/A2plus/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1654,7 +1654,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/Anet/A6/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1129,7 +1129,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1222,7 +1222,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1248,7 +1248,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 4
@@ -1341,7 +1341,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2191,7 +2191,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2220,7 +2220,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/Anet/A6/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 10    // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1654,7 +1654,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/Anet/A8/Configuration.h

@@ -219,7 +219,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1028,7 +1028,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1121,7 +1121,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1147,7 +1147,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1216,7 +1216,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   #define PROBE_PT_1_X 20
   #define PROBE_PT_1_Y 160
   #define PROBE_PT_2_X 20
@@ -2052,7 +2052,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2081,7 +2081,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/Anet/A8/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 10    // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1654,7 +1654,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/AnyCubic/i3/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1025,7 +1025,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1118,7 +1118,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1144,7 +1144,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1213,7 +1213,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2047,7 +2047,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2076,7 +2076,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/AnyCubic/i3/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1654,7 +1654,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/ArmEd/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1016,7 +1016,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1109,7 +1109,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1135,7 +1135,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1204,7 +1204,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2038,7 +2038,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2067,7 +2067,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/ArmEd/Configuration_adv.h

@@ -82,7 +82,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1039,7 +1039,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1658,7 +1658,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/Azteeg/X5GT/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1015,7 +1015,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1108,7 +1108,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1134,7 +1134,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1203,7 +1203,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2037,7 +2037,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2066,7 +2066,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/BIBO/TouchX/cyclops/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1015,7 +1015,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1108,7 +1108,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1134,7 +1134,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1203,7 +1203,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2037,7 +2037,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2066,7 +2066,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/BIBO/TouchX/cyclops/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 2     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1654,7 +1654,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/BIBO/TouchX/default/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1015,7 +1015,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1108,7 +1108,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1134,7 +1134,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1203,7 +1203,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2037,7 +2037,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2066,7 +2066,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/BIBO/TouchX/default/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 2     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1654,7 +1654,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/BQ/Hephestos/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1003,7 +1003,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1096,7 +1096,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1122,7 +1122,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1191,7 +1191,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2025,7 +2025,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2054,7 +2054,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/BQ/Hephestos/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1654,7 +1654,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/BQ/Hephestos_2/Configuration.h

@@ -226,7 +226,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1016,7 +1016,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1108,7 +1108,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1134,7 +1134,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 5
@@ -1203,7 +1203,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2037,7 +2037,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2066,7 +2066,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/BQ/Hephestos_2/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1043,7 +1043,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1662,7 +1662,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/BQ/WITBOX/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1003,7 +1003,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1096,7 +1096,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1122,7 +1122,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1191,7 +1191,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2025,7 +2025,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2054,7 +2054,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/BQ/WITBOX/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1654,7 +1654,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/Cartesio/Configuration.h

@@ -219,7 +219,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1014,7 +1014,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1107,7 +1107,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1133,7 +1133,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1202,7 +1202,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2036,7 +2036,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2065,7 +2065,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/Cartesio/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1654,7 +1654,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/Creality/CR-10/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1025,7 +1025,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1118,7 +1118,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1144,7 +1144,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1213,7 +1213,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2047,7 +2047,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2076,7 +2076,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/Creality/CR-10/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1654,7 +1654,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/Creality/CR-10S/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1015,7 +1015,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1109,7 +1109,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1135,7 +1135,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1204,7 +1204,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2038,7 +2038,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2067,7 +2067,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/Creality/CR-10S/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1654,7 +1654,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/Creality/CR-10_5S/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1017,7 +1017,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1111,7 +1111,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1137,7 +1137,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1206,7 +1206,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2040,7 +2040,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2069,7 +2069,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/Creality/CR-10_5S/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1654,7 +1654,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/Creality/CR-10mini/Configuration.h

@@ -227,7 +227,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1034,7 +1034,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1127,7 +1127,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1153,7 +1153,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1222,7 +1222,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2056,7 +2056,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2085,7 +2085,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/Creality/CR-10mini/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1654,7 +1654,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/Creality/CR-8/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1025,7 +1025,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1118,7 +1118,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1144,7 +1144,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1213,7 +1213,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2047,7 +2047,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2076,7 +2076,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/Creality/CR-8/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1654,7 +1654,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/Creality/Ender-2/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1019,7 +1019,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1112,7 +1112,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1138,7 +1138,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1207,7 +1207,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2041,7 +2041,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2070,7 +2070,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/Creality/Ender-2/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1654,7 +1654,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/Creality/Ender-3/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1019,7 +1019,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1112,7 +1112,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1138,7 +1138,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1207,7 +1207,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2041,7 +2041,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2070,7 +2070,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/Creality/Ender-3/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1654,7 +1654,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/Creality/Ender-4/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1025,7 +1025,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   #define SOFT_ENDSTOPS_MENU_ITEM    // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1118,7 +1118,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1144,7 +1144,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1213,7 +1213,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2047,7 +2047,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2076,7 +2076,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/Creality/Ender-4/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1654,7 +1654,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/Einstart-S/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1025,7 +1025,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1118,7 +1118,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1144,7 +1144,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1213,7 +1213,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2043,7 +2043,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2072,7 +2072,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/Einstart-S/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1654,7 +1654,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/Felix/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -997,7 +997,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1090,7 +1090,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1116,7 +1116,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1185,7 +1185,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2019,7 +2019,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2048,7 +2048,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/Felix/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1654,7 +1654,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/Felix/DUAL/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -997,7 +997,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1090,7 +1090,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1116,7 +1116,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1185,7 +1185,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2019,7 +2019,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2048,7 +2048,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/FlashForge/CreatorPro/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1008,7 +1008,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1101,7 +1101,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1127,7 +1127,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1196,7 +1196,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2029,7 +2029,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2058,7 +2058,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/FlashForge/CreatorPro/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1034,7 +1034,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1653,7 +1653,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/FolgerTech/i3-2020/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1021,7 +1021,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1114,7 +1114,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1140,7 +1140,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1209,7 +1209,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   #define PROBE_PT_1_X 45
   #define PROBE_PT_1_Y 170
   #define PROBE_PT_2_X 45
@@ -2043,7 +2043,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2072,7 +2072,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/FolgerTech/i3-2020/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 2     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1654,7 +1654,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/Formbot/Raptor/Configuration.h

@@ -259,7 +259,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1110,7 +1110,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   #define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1210,7 +1210,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1236,7 +1236,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 6
@@ -1308,7 +1308,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   #define PROBE_PT_1_X 50
   #define PROBE_PT_1_Y 350
   #define PROBE_PT_2_X 50
@@ -2142,7 +2142,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2171,7 +2171,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/Formbot/Raptor/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 2     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1037,7 +1037,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1656,7 +1656,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/Formbot/T_Rex_2+/Configuration.h

@@ -221,7 +221,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1045,7 +1045,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   #define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1138,7 +1138,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1164,7 +1164,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1238,7 +1238,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   #define PROBE_PT_1_X 35
   #define PROBE_PT_1_Y 365
   #define PROBE_PT_2_X 35
@@ -2072,7 +2072,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2101,7 +2101,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/Formbot/T_Rex_2+/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 10    // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1039,7 +1039,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X 4
   //#define MESH_MIN_Y MESH_INSET
@@ -1658,7 +1658,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/Formbot/T_Rex_3/Configuration.h

@@ -222,7 +222,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1035,7 +1035,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   #define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1133,7 +1133,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1159,7 +1159,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1228,7 +1228,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   #define PROBE_PT_1_X 35
   #define PROBE_PT_1_Y 365
   #define PROBE_PT_2_X 35
@@ -2065,7 +2065,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2094,7 +2094,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/Formbot/T_Rex_3/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 10    // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1039,7 +1039,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X 4
   //#define MESH_MIN_Y MESH_INSET
@@ -1658,7 +1658,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/Geeetech/A10M/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -998,7 +998,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1093,7 +1093,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1119,7 +1119,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 5
@@ -1188,7 +1188,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2022,7 +2022,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2051,7 +2051,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/Geeetech/A10M/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1654,7 +1654,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/Geeetech/A20M/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -998,7 +998,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1093,7 +1093,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1119,7 +1119,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1188,7 +1188,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2026,7 +2026,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2055,7 +2055,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/Geeetech/A20M/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1654,7 +1654,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/Geeetech/GT2560/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1030,7 +1030,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1123,7 +1123,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1149,7 +1149,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1218,7 +1218,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2052,7 +2052,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2081,7 +2081,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 
@@ -2110,7 +2110,7 @@
 /**
  * Customize common displays for GT2560
  */
-#if ENABLED(ULTIMAKERCONTROLLER) || ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) || ENABLED(G3D_PANEL) || ENABLED(MKS_MINI_12864)
+#if ANY(ULTIMAKERCONTROLLER, REPRAP_DISCOUNT_SMART_CONTROLLER, G3D_PANEL, MKS_MINI_12864)
   #define SDSUPPORT   // Force SD Card support on for these displays
 #elif DISABLED(LIGHTWEIGHT_UI)
   #define LCD_WIDTH 20 // Default is 22. For this Geeetech use 20.

config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1015,7 +1015,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1108,7 +1108,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1134,7 +1134,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1203,7 +1203,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2037,7 +2037,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2066,7 +2066,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/Geeetech/MeCreator2/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1022,7 +1022,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1115,7 +1115,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1141,7 +1141,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1210,7 +1210,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2044,7 +2044,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2073,7 +2073,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/Geeetech/MeCreator2/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1654,7 +1654,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1031,7 +1031,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1124,7 +1124,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1150,7 +1150,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 4
@@ -1219,7 +1219,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2053,7 +2053,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2082,7 +2082,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1030,7 +1030,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1123,7 +1123,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1149,7 +1149,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 4
@@ -1218,7 +1218,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2052,7 +2052,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2081,7 +2081,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/Geeetech/Prusa i3 Pro C/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1015,7 +1015,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1108,7 +1108,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1134,7 +1134,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1203,7 +1203,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2037,7 +2037,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2066,7 +2066,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1654,7 +1654,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/Geeetech/Prusa i3 Pro W/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1015,7 +1015,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1108,7 +1108,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1134,7 +1134,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1203,7 +1203,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2037,7 +2037,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2066,7 +2066,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1654,7 +1654,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/Infitary/i3-M508/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1019,7 +1019,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1112,7 +1112,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1138,7 +1138,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1207,7 +1207,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2041,7 +2041,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2070,7 +2070,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/Infitary/i3-M508/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1654,7 +1654,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/JGAurora/A5/Configuration.h

@@ -223,7 +223,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1027,7 +1027,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1120,7 +1120,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1146,7 +1146,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 5
@@ -1215,7 +1215,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2049,7 +2049,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2078,7 +2078,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/JGAurora/A5/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1654,7 +1654,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/MakerParts/Configuration.h

@@ -238,7 +238,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1035,7 +1035,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1128,7 +1128,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1154,7 +1154,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1223,7 +1223,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2057,7 +2057,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2086,7 +2086,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/MakerParts/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1654,7 +1654,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/Malyan/M150/Configuration.h

@@ -223,7 +223,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1039,7 +1039,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1136,7 +1136,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1162,7 +1162,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1231,7 +1231,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   #define PROBE_PT_1_X 50
   #define PROBE_PT_1_Y 150
   #define PROBE_PT_2_X 50
@@ -2065,7 +2065,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2094,7 +2094,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/Malyan/M150/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1654,7 +1654,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/Malyan/M200/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1014,7 +1014,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1107,7 +1107,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1133,7 +1133,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1202,7 +1202,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2036,7 +2036,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2065,7 +2065,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/Malyan/M200/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1654,7 +1654,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/Micromake/C1/basic/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1019,7 +1019,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1112,7 +1112,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1138,7 +1138,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1207,7 +1207,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2041,7 +2041,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2070,7 +2070,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/Micromake/C1/enhanced/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1019,7 +1019,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1112,7 +1112,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1138,7 +1138,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1207,7 +1207,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2041,7 +2041,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2070,7 +2070,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/Micromake/C1/enhanced/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1654,7 +1654,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/Mks/Robin/Configuration.h

@@ -219,7 +219,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1016,7 +1016,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1109,7 +1109,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1135,7 +1135,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1204,7 +1204,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2039,7 +2039,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2068,7 +2068,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/Mks/Robin/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1654,7 +1654,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/Mks/Sbase/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1015,7 +1015,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1108,7 +1108,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1134,7 +1134,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1203,7 +1203,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2037,7 +2037,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2066,7 +2066,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/Mks/Sbase/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 6     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1036,7 +1036,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1655,7 +1655,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/Printrbot/PrintrboardG2/Configuration.h

@@ -219,7 +219,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1023,7 +1023,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1116,7 +1116,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1142,7 +1142,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1211,7 +1211,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2045,7 +2045,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2074,7 +2074,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/RapideLite/RL200/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1015,7 +1015,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1108,7 +1108,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1134,7 +1134,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1203,7 +1203,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2037,7 +2037,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2066,7 +2066,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/RapideLite/RL200/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1654,7 +1654,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/RepRapPro/Huxley/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1064,7 +1064,7 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1157,7 +1157,7 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1183,7 +1183,7 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1252,7 +1252,7 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2086,7 +2086,7 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2115,7 +2115,7 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/RepRapWorld/Megatronics/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1015,7 +1015,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1108,7 +1108,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1134,7 +1134,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1203,7 +1203,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2037,7 +2037,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2066,7 +2066,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/RigidBot/Configuration.h

@@ -221,7 +221,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1013,7 +1013,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1106,7 +1106,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1132,7 +1132,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1201,7 +1201,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2037,7 +2037,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2066,7 +2066,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/RigidBot/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1654,7 +1654,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/SCARA/Configuration.h

@@ -70,7 +70,7 @@
 #define MORGAN_SCARA
 //#define MAKERARM_SCARA
 
-#if ENABLED(MORGAN_SCARA) || ENABLED(MAKERARM_SCARA)
+#if EITHER(MORGAN_SCARA, MAKERARM_SCARA)
 
   //#define DEBUG_SCARA_KINEMATICS
   #define SCARA_FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
@@ -249,7 +249,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1028,7 +1028,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1121,7 +1121,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1147,7 +1147,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1216,7 +1216,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2050,7 +2050,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2079,7 +2079,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/SCARA/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1654,7 +1654,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/STM32F10/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1017,7 +1017,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1110,7 +1110,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1136,7 +1136,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1205,7 +1205,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2039,7 +2039,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2068,7 +2068,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/STM32F4/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1015,7 +1015,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1108,7 +1108,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1134,7 +1134,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1203,7 +1203,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2037,7 +2037,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2066,7 +2066,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/Sanguinololu/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1046,7 +1046,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1139,7 +1139,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1165,7 +1165,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1234,7 +1234,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2068,7 +2068,7 @@
 #define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 11
   #define RGB_LED_G_PIN 10
   #define RGB_LED_B_PIN 17
@@ -2097,7 +2097,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/Sanguinololu/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1654,7 +1654,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/TheBorg/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1015,7 +1015,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1108,7 +1108,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1134,7 +1134,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1203,7 +1203,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2037,7 +2037,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2066,7 +2066,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/TheBorg/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 6     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1654,7 +1654,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/TinyBoy2/Configuration.h

@@ -240,7 +240,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1071,7 +1071,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1164,7 +1164,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1190,7 +1190,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1259,7 +1259,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2093,7 +2093,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2122,7 +2122,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/TinyBoy2/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1654,7 +1654,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/Tronxy/X1/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1015,7 +1015,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1108,7 +1108,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1134,7 +1134,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1203,7 +1203,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2037,7 +2037,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2066,7 +2066,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/Tronxy/X3A/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1019,7 +1019,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1112,7 +1112,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1138,7 +1138,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1207,7 +1207,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2041,7 +2041,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2070,7 +2070,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/Tronxy/X3A/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1654,7 +1654,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/Tronxy/X5S-2E/Configuration.h

@@ -220,7 +220,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1036,7 +1036,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1129,7 +1129,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1155,7 +1155,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1224,7 +1224,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2058,7 +2058,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2087,7 +2087,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/Tronxy/X5S-2E/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1654,7 +1654,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/Tronxy/X5S/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1014,7 +1014,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1107,7 +1107,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1133,7 +1133,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1202,7 +1202,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2036,7 +2036,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2065,7 +2065,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/Tronxy/XY100/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1026,7 +1026,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1119,7 +1119,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1145,7 +1145,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1214,7 +1214,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2048,7 +2048,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2077,7 +2077,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/UltiMachine/Archim1/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1015,7 +1015,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1108,7 +1108,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1134,7 +1134,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1203,7 +1203,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2037,7 +2037,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2066,7 +2066,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/UltiMachine/Archim1/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1654,7 +1654,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/UltiMachine/Archim2/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1015,7 +1015,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1108,7 +1108,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1134,7 +1134,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1203,7 +1203,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2037,7 +2037,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2066,7 +2066,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/UltiMachine/Archim2/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1654,7 +1654,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/VORONDesign/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1024,7 +1024,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1117,7 +1117,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1143,7 +1143,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1212,7 +1212,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2046,7 +2046,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2075,7 +2075,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/VORONDesign/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1654,7 +1654,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/Velleman/K8200/Configuration.h

@@ -238,7 +238,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1045,7 +1045,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1138,7 +1138,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1164,7 +1164,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1233,7 +1233,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2072,7 +2072,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2101,7 +2101,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/Velleman/K8200/Configuration_adv.h

@@ -88,7 +88,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 8     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1048,7 +1048,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1667,7 +1667,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/Velleman/K8400/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1015,7 +1015,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1108,7 +1108,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1134,7 +1134,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1203,7 +1203,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2037,7 +2037,7 @@
 //#define RGB_LED  // Enable for the Velleman RGB LED Add-on. https://www.velleman.eu/products/view/?id=430100
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   // Pin defines for the RGB LED Add-on.
   #define RGB_LED_R_PIN 41
   #define RGB_LED_G_PIN 40
@@ -2067,7 +2067,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/Velleman/K8400/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1654,7 +1654,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/Velleman/K8400/Dual-head/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1015,7 +1015,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1108,7 +1108,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1134,7 +1134,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1203,7 +1203,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2037,7 +2037,7 @@
 //#define RGB_LED  // Enable for the Velleman RGB LED Add-on. https://www.velleman.eu/products/view/?id=430100
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   // Pin defines for the RGB LED Add-on.
   #define RGB_LED_R_PIN 41
   #define RGB_LED_G_PIN 40
@@ -2067,7 +2067,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/WASP/PowerWASP/Configuration.h

@@ -237,7 +237,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1034,7 +1034,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1127,7 +1127,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1153,7 +1153,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1222,7 +1222,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2056,7 +2056,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2085,7 +2085,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/WASP/PowerWASP/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1654,7 +1654,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/Wanhao/Duplicator 6/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1025,7 +1025,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1118,7 +1118,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1144,7 +1144,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1213,7 +1213,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2050,7 +2050,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2079,7 +2079,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/Wanhao/Duplicator 6/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1037,7 +1037,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1656,7 +1656,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/adafruit/ST7565/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1015,7 +1015,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1108,7 +1108,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1134,7 +1134,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1203,7 +1203,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2037,7 +2037,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2066,7 +2066,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/delta/Anycubic/Kossel/Configuration.h

@@ -233,7 +233,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -638,7 +638,7 @@
     #define DELTA_CALIBRATION_DEFAULT_POINTS 4
   #endif
 
-  #if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU)
+  #if EITHER(DELTA_AUTO_CALIBRATION, DELTA_CALIBRATION_MENU)
     // Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes
     #define DELTA_CALIBRATION_RADIUS DELTA_PRINTABLE_RADIUS - MIN_PROBE_EDGE  // (mm)
     // Set the steprate for papertest probing
@@ -1203,7 +1203,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   #define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1298,7 +1298,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1324,7 +1324,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   // Works best with 5 or more points in each dimension.
@@ -1394,7 +1394,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   #define PROBE_PT_1_X -40
   #define PROBE_PT_1_Y 60
   #define PROBE_PT_2_X 40
@@ -2227,7 +2227,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2256,7 +2256,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/delta/Anycubic/Kossel/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1037,7 +1037,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1656,7 +1656,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/delta/FLSUN/auto_calibrate/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -605,7 +605,7 @@
     #define DELTA_CALIBRATION_DEFAULT_POINTS 4
   #endif
 
-  #if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU)
+  #if EITHER(DELTA_AUTO_CALIBRATION, DELTA_CALIBRATION_MENU)
     // Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes
     #define DELTA_CALIBRATION_RADIUS 73.5 // (mm)
     // Set the steprate for papertest probing
@@ -1143,7 +1143,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1236,7 +1236,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1262,7 +1262,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   // Works best with 5 or more points in each dimension.
@@ -1332,7 +1332,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2165,7 +2165,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2194,7 +2194,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1037,7 +1037,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1656,7 +1656,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/delta/FLSUN/kossel/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -605,7 +605,7 @@
     #define DELTA_CALIBRATION_DEFAULT_POINTS 7
   #endif
 
-  #if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU)
+  #if EITHER(DELTA_AUTO_CALIBRATION, DELTA_CALIBRATION_MENU)
     // Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes
     #define DELTA_CALIBRATION_RADIUS 63   // (mm)
     // Set the steprate for papertest probing
@@ -1142,7 +1142,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1235,7 +1235,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1261,7 +1261,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   // Works best with 5 or more points in each dimension.
@@ -1331,7 +1331,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2164,7 +2164,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2193,7 +2193,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/delta/FLSUN/kossel/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1037,7 +1037,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1656,7 +1656,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/delta/FLSUN/kossel_mini/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -605,7 +605,7 @@
     #define DELTA_CALIBRATION_DEFAULT_POINTS 4
   #endif
 
-  #if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU)
+  #if EITHER(DELTA_AUTO_CALIBRATION, DELTA_CALIBRATION_MENU)
     // Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes
     #define DELTA_CALIBRATION_RADIUS 73.5 // (mm)
     // Set the steprate for papertest probing
@@ -1142,7 +1142,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1235,7 +1235,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1261,7 +1261,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   // Works best with 5 or more points in each dimension.
@@ -1331,7 +1331,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2164,7 +2164,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2193,7 +2193,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1037,7 +1037,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1656,7 +1656,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/delta/Geeetech/Rostock 301/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -595,7 +595,7 @@
     #define DELTA_CALIBRATION_DEFAULT_POINTS 4
   #endif
 
-  #if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU)
+  #if EITHER(DELTA_AUTO_CALIBRATION, DELTA_CALIBRATION_MENU)
     // Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes
     #define DELTA_CALIBRATION_RADIUS 121.5 // (mm)
     // Set the steprate for papertest probing
@@ -1133,7 +1133,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1226,7 +1226,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1252,7 +1252,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   // Works best with 5 or more points in each dimension.
@@ -1322,7 +1322,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2155,7 +2155,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2184,7 +2184,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1037,7 +1037,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1656,7 +1656,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/delta/Hatchbox_Alpha/Configuration.h

@@ -223,7 +223,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -610,7 +610,7 @@
     #define DELTA_CALIBRATION_DEFAULT_POINTS 4
   #endif
 
-  #if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU)
+  #if EITHER(DELTA_AUTO_CALIBRATION, DELTA_CALIBRATION_MENU)
     // Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes
     #define DELTA_CALIBRATION_RADIUS 121.5 // (mm)
     // Set the steprate for papertest probing
@@ -1145,7 +1145,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1238,7 +1238,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1264,7 +1264,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   // Works best with 5 or more points in each dimension.
@@ -1334,7 +1334,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   #define PROBE_PT_1_X -116
   #define PROBE_PT_1_Y -67.5
   #define PROBE_PT_2_X 116
@@ -2167,7 +2167,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2196,7 +2196,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/delta/MKS/SBASE/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -595,7 +595,7 @@
     #define DELTA_CALIBRATION_DEFAULT_POINTS 4
   #endif
 
-  #if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU)
+  #if EITHER(DELTA_AUTO_CALIBRATION, DELTA_CALIBRATION_MENU)
     // Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes
     #define DELTA_CALIBRATION_RADIUS 121.5 // (mm)
     // Set the steprate for papertest probing
@@ -1130,7 +1130,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1223,7 +1223,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1249,7 +1249,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   // Works best with 5 or more points in each dimension.
@@ -1319,7 +1319,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2152,7 +2152,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2181,7 +2181,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/delta/MKS/SBASE/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 6     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1037,7 +1037,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1656,7 +1656,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/delta/Tevo Little Monster/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -599,7 +599,7 @@
     #define DELTA_CALIBRATION_DEFAULT_POINTS 7
   #endif
 
-  #if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU)
+  #if EITHER(DELTA_AUTO_CALIBRATION, DELTA_CALIBRATION_MENU)
     // Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes
     #define DELTA_CALIBRATION_RADIUS 140  // (mm)
     // Set the steprate for papertest probing
@@ -1134,7 +1134,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1227,7 +1227,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1253,7 +1253,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   // Works best with 5 or more points in each dimension.
@@ -1323,7 +1323,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2156,7 +2156,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2185,7 +2185,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/delta/Tevo Little Monster/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 10     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1037,7 +1037,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1656,7 +1656,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/delta/generic/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -595,7 +595,7 @@
     #define DELTA_CALIBRATION_DEFAULT_POINTS 4
   #endif
 
-  #if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU)
+  #if EITHER(DELTA_AUTO_CALIBRATION, DELTA_CALIBRATION_MENU)
     // Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes
     #define DELTA_CALIBRATION_RADIUS 121.5 // (mm)
     // Set the steprate for papertest probing
@@ -1130,7 +1130,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1223,7 +1223,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1249,7 +1249,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   // Works best with 5 or more points in each dimension.
@@ -1319,7 +1319,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2152,7 +2152,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2181,7 +2181,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/delta/generic/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1037,7 +1037,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1656,7 +1656,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/delta/kossel_mini/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -595,7 +595,7 @@
     #define DELTA_CALIBRATION_DEFAULT_POINTS 4
   #endif
 
-  #if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU)
+  #if EITHER(DELTA_AUTO_CALIBRATION, DELTA_CALIBRATION_MENU)
     // Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes
     #define DELTA_CALIBRATION_RADIUS 78.0 // (mm)
     // Set the steprate for papertest probing
@@ -1132,7 +1132,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1225,7 +1225,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1251,7 +1251,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   // Works best with 5 or more points in each dimension.
@@ -1321,7 +1321,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2154,7 +2154,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2183,7 +2183,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/delta/kossel_mini/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1036,7 +1036,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1655,7 +1655,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/delta/kossel_pro/Configuration.h

@@ -222,7 +222,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -581,7 +581,7 @@
     #define DELTA_CALIBRATION_DEFAULT_POINTS 4
   #endif
 
-  #if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU)
+  #if EITHER(DELTA_AUTO_CALIBRATION, DELTA_CALIBRATION_MENU)
     // Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes
     #define DELTA_CALIBRATION_RADIUS 110.0 // (mm)
     // Set the steprate for papertest probing
@@ -1133,7 +1133,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1226,7 +1226,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1252,7 +1252,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   // Works best with 5 or more points in each dimension.
@@ -1322,7 +1322,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2155,7 +2155,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2184,7 +2184,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/delta/kossel_xl/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -599,7 +599,7 @@
     #define DELTA_CALIBRATION_DEFAULT_POINTS 4
   #endif
 
-  #if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU)
+  #if EITHER(DELTA_AUTO_CALIBRATION, DELTA_CALIBRATION_MENU)
     // Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes
     #define DELTA_CALIBRATION_RADIUS 121.5 // (mm)
     // Set the steprate for papertest probing
@@ -1133,7 +1133,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1226,7 +1226,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1252,7 +1252,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   // Works best with 5 or more points in each dimension.
@@ -1322,7 +1322,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2155,7 +2155,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2184,7 +2184,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/delta/kossel_xl/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1037,7 +1037,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1656,7 +1656,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/gCreate/gMax1.5+/Configuration.h

@@ -223,7 +223,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1029,7 +1029,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1122,7 +1122,7 @@
  */
 #define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1148,7 +1148,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1217,7 +1217,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   #define PROBE_PT_1_X 53
   #define PROBE_PT_1_Y 323
   #define PROBE_PT_2_X 53
@@ -2051,7 +2051,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2080,7 +2080,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/gCreate/gMax1.5+/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 3     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1654,7 +1654,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/makibox/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1018,7 +1018,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1111,7 +1111,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1137,7 +1137,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1206,7 +1206,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2040,7 +2040,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2069,7 +2069,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/makibox/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1654,7 +1654,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/stm32f103ret6/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1017,7 +1017,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1110,7 +1110,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1136,7 +1136,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1205,7 +1205,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2039,7 +2039,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2068,7 +2068,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/tvrrug/Round2/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1010,7 +1010,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1103,7 +1103,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1129,7 +1129,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1198,7 +1198,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2032,7 +2032,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2061,7 +2061,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/tvrrug/Round2/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1035,7 +1035,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1654,7 +1654,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8

config/examples/wt150/Configuration.h

@@ -218,7 +218,7 @@
  */
 //#define MAGNETIC_PARKING_EXTRUDER
 
-#if ENABLED(PARKING_EXTRUDER) || ENABLED(MAGNETIC_PARKING_EXTRUDER)
+#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
 
   #define PARKING_EXTRUDER_PARKING_X { -78, 184 }     // X positions for parking the extruders
   #define PARKING_EXTRUDER_GRAB_DISTANCE 1            // (mm) Distance to move beyond the parking point to grab the extruder
@@ -1020,7 +1020,7 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
-#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
   //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
@@ -1113,7 +1113,7 @@
  */
 //#define DEBUG_LEVELING_FEATURE
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,
   // at which point movement will be level to the machine's XY plane.
   // The height can be set with M420 Z<height>
@@ -1139,7 +1139,7 @@
 
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
   #define GRID_MAX_POINTS_X 3
@@ -1208,7 +1208,7 @@
  * Points to probe for all 3-point Leveling procedures.
  * Override if the automatically selected points are inadequate.
  */
-#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
   //#define PROBE_PT_1_X 15
   //#define PROBE_PT_1_Y 180
   //#define PROBE_PT_2_X 15
@@ -2042,7 +2042,7 @@
 //#define RGB_LED
 //#define RGBW_LED
 
-#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+#if EITHER(RGB_LED, RGBW_LED)
   #define RGB_LED_R_PIN 34
   #define RGB_LED_G_PIN 43
   #define RGB_LED_B_PIN 35
@@ -2071,7 +2071,7 @@
  *  - Change to green once print has finished
  *  - Turn off after the print has finished and the user has pushed a button
  */
-#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
+#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
   #define PRINTER_EVENT_LEDS
 #endif
 

config/examples/wt150/Configuration_adv.h

@@ -78,7 +78,7 @@
   #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
 
   //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
@@ -1036,7 +1036,7 @@
 
 // @section leveling
 
-#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
   //#define MESH_MIN_Y MESH_INSET
@@ -1655,7 +1655,7 @@
    */
   //#define SENSORLESS_PROBING // TMC2130 only
 
-  #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
     #define X_STALL_SENSITIVITY  8
     #define Y_STALL_SENSITIVITY  8
     //#define Z_STALL_SENSITIVITY  8