SunRed/Marlin-Artillery-M600
Archived
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity

Merge pull request #4463 from thinkyhead/rc_azteeg_x3_eeb

Browse source 
Wrangle RAMPS variants and derivatives
This commit is contained in:
Scott Lahteine 2016-07-31 18:22:49 -07:00 committed by GitHub
parent 1993c45759 49997e2e22
commit 4bf3526d00
16 changed files with 148 additions and 128 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

6
.travis.yml
View file

@ -56,11 +56,11 @@ before_script:
#
script:
#
# Backup Configuration.h, Configuration_adv.h, and pins_RAMPS_14.h
# Backup Configuration.h, Configuration_adv.h, and pins_RAMPS.h
#
- cp Marlin/Configuration.h Marlin/Configuration.h.backup
- cp Marlin/Configuration_adv.h Marlin/Configuration_adv.h.backup
- cp Marlin/pins_RAMPS_14.h Marlin/pins_RAMPS_14.h.backup
- cp Marlin/pins_RAMPS.h Marlin/pins_RAMPS.h.backup
#
# Build with the default configurations
#
@ -221,7 +221,7 @@ script:
#
- restore_configs
- opt_enable_adv Z_DUAL_STEPPER_DRIVERS Z_DUAL_ENDSTOPS
- pins_set RAMPS_14 X_MAX_PIN -1
- pins_set RAMPS X_MAX_PIN -1
- opt_set_adv Z2_MAX_PIN 2
- build_marlin
#

6
Marlin/Marlin_main.cpp
View file

@ -939,7 +939,7 @@ void setup() {
dac_init();
#endif
#if ENABLED(Z_PROBE_SLED)
#if ENABLED(Z_PROBE_SLED) && PIN_EXISTS(SLED)
pinMode(SLED_PIN, OUTPUT);
digitalWrite(SLED_PIN, LOW); // turn it off
#endif // Z_PROBE_SLED
@ -1856,8 +1856,10 @@ static void clean_up_after_endstop_or_probe_move() {
// Dock sled a bit closer to ensure proper capturing
do_blocking_move_to_x(X_MAX_POS + SLED_DOCKING_OFFSET - ((stow) ? 1 : 0));
digitalWrite(SLED_PIN, !stow); // switch solenoid
#if PIN_EXISTS(SLED)
digitalWrite(SLED_PIN, !stow); // switch solenoid
#endif
}
#endif // Z_PROBE_SLED

34
Marlin/pins.h
View file

@ -42,13 +42,35 @@
#elif MB(RAMPS_OLD)
#include "pins_RAMPS_OLD.h"
#elif MB(RAMPS_13_EFB)
#include "pins_RAMPS_13_EFB.h"
#elif MB(RAMPS_13_EEB) || MB(RAMPS_13_EFF) || MB(RAMPS_13_EEF) || MB(RAMPS_13_SF)
#define IS_RAMPS_EFB
#include "pins_RAMPS_13.h"
#elif MB(RAMPS_13_EEB)
#define IS_RAMPS_EEB
#include "pins_RAMPS_13.h"
#elif MB(RAMPS_13_EFF)
#define IS_RAMPS_EFF
#include "pins_RAMPS_13.h"
#elif MB(RAMPS_13_EEF)
#define IS_RAMPS_EEF
#include "pins_RAMPS_13.h"
#elif MB(RAMPS_13_SF)
#define IS_RAMPS_SF
#include "pins_RAMPS_13.h"
#elif MB(RAMPS_14_EFB)
#include "pins_RAMPS_14_EFB.h"
#elif MB(RAMPS_14_EEB) || MB(RAMPS_14_EFF) || MB(RAMPS_14_EEF) || MB(RAMPS_14_SF)
#include "pins_RAMPS_14.h"
#define IS_RAMPS_EFB
#include "pins_RAMPS.h"
#elif MB(RAMPS_14_EEB)
#define IS_RAMPS_EEB
#include "pins_RAMPS.h"
#elif MB(RAMPS_14_EFF)
#define IS_RAMPS_EFF
#include "pins_RAMPS.h"
#elif MB(RAMPS_14_EEF)
#define IS_RAMPS_EEF
#include "pins_RAMPS.h"
#elif MB(RAMPS_14_SF)
#define IS_RAMPS_SF
#include "pins_RAMPS.h"
#elif MB(GEN6)
#include "pins_GEN6.h"
#elif MB(GEN6_DELUXE)
@ -124,7 +146,7 @@
#elif MB(LEAPFROG)
#include "pins_LEAPFROG.h"
#elif MB(BAM_DICE)
#include "pins_RAMPS_14.h"
#include "pins_RAMPS.h"
#elif MB(BAM_DICE_DUE)
#include "pins_BAM_DICE_DUE.h"
#elif MB(FELIX2)

2
Marlin/pins_3DRAG.h
View file

@ -36,7 +36,7 @@
#define DEFAULT_SOURCE_CODE_URL "http://3dprint.elettronicain.it/"
#endif
#include "pins_RAMPS_14.h"
#include "pins_RAMPS.h"
#undef Z_ENABLE_PIN
#define Z_ENABLE_PIN 63

6
Marlin/pins_AZTEEG_X3.h
View file

@ -24,9 +24,13 @@
* AZTEEG_X3 Arduino Mega with RAMPS v1.4 pin assignments
*/
#if HOTENDS > 2
#error "Azteeg X3 supports up to 2 hotends. Comment this line to keep going."
#endif
#define BOARD_NAME "Azteeg X3"
#include "pins_RAMPS_14_EFB.h"
#include "pins_RAMPS.h"
#if ENABLED(VIKI2) || ENABLED(miniVIKI)

2
Marlin/pins_AZTEEG_X3_PRO.h
View file

@ -26,7 +26,7 @@
#define BOARD_NAME "Azteeg X3 Pro"
#include "pins_RAMPS_14.h"
#include "pins_RAMPS.h"
#undef FAN_PIN
#define FAN_PIN 6 //Part Cooling System

6
Marlin/pins_BAM_DICE_DUE.h
View file

@ -24,9 +24,13 @@
* BAM&DICE Due (Arduino Mega) pin assignments
*/
#if HOTENDS > 2
#error "2PrintBeta Due supports up to 2 hotends. Comment this line to keep going."
#endif
#define BOARD_NAME "2PrintBeta Due"
#include "pins_RAMPS_14_EFB.h"
#include "pins_RAMPS.h"
#undef TEMP_0_PIN
#undef TEMP_1_PIN

9
Marlin/pins_FELIX2.h
View file

@ -24,12 +24,15 @@
* FELIXprinters v2.0/3.0 (RAMPS v1.4) pin assignments
*/
#if HOTENDS > 2
#error "Felix 2.0+ supports up to 2 hotends. Comment this line to keep going."
#endif
#define BOARD_NAME "Felix 2.0+"
#include "pins_RAMPS_14_EFB.h"
#define MOSFET_D_PIN 7
#undef HEATER_1_PIN
#define HEATER_1_PIN 7 // EXTRUDER 2
#include "pins_RAMPS.h"
#undef SDPOWER
#define SDPOWER 1

9
Marlin/pins_MKS_13.h
View file

@ -29,12 +29,15 @@
* MKS v1.4 (Extruder, Extruder, Fan, Bed)
*/
#if HOTENDS > 2
#error "MKS 1.3/1.4 supports up to 2 hotends. Comment this line to keep going."
#endif
#define BOARD_NAME "MKS > v1.3"
#include "pins_RAMPS_14_EFB.h"
#define MOSFET_D_PIN 7
#undef HEATER_1_PIN
#define HEATER_1_PIN 7 // EXTRUDER 2 (-1 on RAMPS 1.4)
#include "pins_RAMPS.h"
#if ENABLED(VIKI2) || ENABLED(miniVIKI)
/**

9
Marlin/pins_MKS_BASE.h
View file

@ -24,9 +24,12 @@
* MKS BASE 1.0 – Arduino Mega2560 with RAMPS v1.4 pin assignments
*/
#if HOTENDS > 2
#error "MKS BASE 1.0 supports up to 2 hotends. Comment this line to keep going."
#endif
#define BOARD_NAME "MKS BASE 1.0"
#include "pins_RAMPS_14_EFB.h"
#define MOSFET_D_PIN 7
#undef HEATER_1_PIN
#define HEATER_1_PIN 7
#include "pins_RAMPS.h"

98
Marlin/pins_RAMPS_14.h → Marlin/pins_RAMPS.h
View file

@ -105,32 +105,7 @@
// define digital pin 4 for the filament runout sensor. Use the RAMPS 1.4 digital input 4 on the servos connector
#define FIL_RUNOUT_PIN 4
#if MB(RAMPS_14_EFF) || MB(RAMPS_13_EFF) || ENABLED(IS_RAMPS_EFB)
#define FAN_PIN 9 // (Sprinter config)
#if MB(RAMPS_14_EFF) || MB(RAMPS_13_EFF)
#define CONTROLLERFAN_PIN -1 // Pin used for the fan to cool controller
#endif
#elif MB(RAMPS_14_EEF) || MB(RAMPS_14_SF) || MB(RAMPS_13_EEF) || MB(RAMPS_13_SF)
#define FAN_PIN 8
#else
#define FAN_PIN 4 // IO pin. Buffer needed
#endif
#define PS_ON_PIN 12
#if MB(RAMPS_14_EFF) || MB(RAMPS_13_EFF)
#define HEATER_0_PIN 8
#else
#define HEATER_0_PIN 10 // EXTRUDER 1
#if !MB(RAMPS_14_EEF) && !MB(RAMPS_13_EEF) && !MB(RAMPS_14_SF) && !MB(RAMPS_13_SF)
#define HEATER_BED_PIN 8 // BED
#endif
#endif
#if !MB(RAMPS_14_SF) && !MB(RAMPS_13_SF) && !ENABLED(IS_RAMPS_EFB)
#define HEATER_1_PIN 9 // EXTRUDER 2 (FAN On Sprinter)
#endif
#define TEMP_0_PIN 13 // ANALOG NUMBERING
#define TEMP_1_PIN 15 // ANALOG NUMBERING
#define TEMP_BED_PIN 14 // ANALOG NUMBERING
@ -139,6 +114,78 @@
#define SLED_PIN -1
#endif
/*
// Augmentation for auto-assigning RAMPS plugs
#if DISABLED(IS_RAMPS_EEB) && DISABLED(IS_RAMPS_EEF) && DISABLED(IS_RAMPS_EFB) && DISABLED(IS_RAMPS_EFF) && DISABLED(IS_RAMPS_SF)
#if HOTENDS > 1
#if TEMP_SENSOR_BED
#define IS_RAMPS_EEB
#else
#define IS_RAMPS_EEF
#endif
#elif TEMP_SENSOR_BED
#define IS_RAMPS_EFB
#else
#define IS_RAMPS_EFF
#endif
#endif
*/
/**
* Hi Voltage PWM Pin Assignments
*/
#ifndef MOSFET_D_PIN
#define MOSFET_D_PIN -1
#endif
#ifndef RAMPS_D8_PIN
#define RAMPS_D8_PIN 8
#endif
#ifndef RAMPS_D9_PIN
#define RAMPS_D9_PIN 9
#endif
#ifndef RAMPS_D10_PIN
#define RAMPS_D10_PIN 10
#endif
#define HEATER_0_PIN RAMPS_D10_PIN
#if ENABLED(IS_RAMPS_EFB) // Hotend, Fan, Bed
#define FAN_PIN RAMPS_D9_PIN
#define HEATER_BED_PIN RAMPS_D8_PIN
#elif ENABLED(IS_RAMPS_EEF) // Hotend, Hotend, Fan
#define HEATER_1_PIN RAMPS_D9_PIN
#define FAN_PIN RAMPS_D8_PIN
#elif ENABLED(IS_RAMPS_EEB) // Hotend, Hotend, Bed
#define HEATER_1_PIN RAMPS_D9_PIN
#define HEATER_BED_PIN RAMPS_D8_PIN
#elif ENABLED(IS_RAMPS_EFF) // Hotend, Fan, Fan
#define FAN_PIN RAMPS_D9_PIN
#define FAN1_PIN RAMPS_D8_PIN
#define CONTROLLERFAN_PIN -1
#elif ENABLED(IS_RAMPS_SF) // Spindle, Fan
#define FAN_PIN RAMPS_D8_PIN
#else // Non-specific are "EFB" by legacy
#define FAN_PIN RAMPS_D9_PIN
#define HEATER_BED_PIN RAMPS_D8_PIN
#if HOTENDS == 1
#define FAN1_PIN MOSFET_D_PIN
#else
#define HEATER_1_PIN MOSFET_D_PIN
#endif
#endif
#ifndef FAN_PIN
#define FAN_PIN 4 // IO pin. Buffer needed
#endif
/**
* LCD Controller Pin Assignments
*/
#if ENABLED(ULTRA_LCD)
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
@ -301,4 +348,3 @@
#else
#define MAX6675_SS 66 // Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
#endif

2
Marlin/pins_RAMPS_13.h
View file

@ -38,4 +38,4 @@
#endif
#define IS_RAMPS_13
#include "pins_RAMPS_14.h"
#include "pins_RAMPS.h"

32
Marlin/pins_RAMPS_13_EFB.h
View file

@ -1,32 +0,0 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Arduino Mega with RAMPS v1.3 pin assignments
*
* RAMPS_13_EFB (Extruder, Fan, Bed)
*/
#define BOARD_NAME "RAMPS 1.3 EFB"
#define IS_RAMPS_13
#include "pins_RAMPS_14_EFB.h"

34
Marlin/pins_RAMPS_14_EFB.h
View file

@ -1,34 +0,0 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Arduino Mega with RAMPS v1.4 pin assignments
*
* RAMPS_14_EFB (Extruder, Fan, Bed)
*/
#ifndef BOARD_NAME
#define BOARD_NAME "RAMPS 1.4 EFB"
#endif
#define IS_RAMPS_EFB
#include "pins_RAMPS_14.h"

2
Marlin/pins_RIGIDBOARD.h
View file

@ -24,7 +24,7 @@
* RIGIDBOARD Arduino Mega with RAMPS v1.4 pin assignments
*/
#include "pins_RAMPS_14.h"
#include "pins_RAMPS.h"
#undef BOARD_NAME
#define BOARD_NAME "RigidBoard"

19
Marlin/pins_SAINSMART_2IN1.h
View file

@ -24,16 +24,15 @@
* Sainsmart 2-in-1 pin assignments
*/
#include "pins_RAMPS_14_EFB.h"
#if HOTENDS > 2
#error "Sainsmart 2-in-1 supports up to 2 hotends. Comment this line to keep going."
#endif
#undef BOARD_NAME
#define BOARD_NAME "Sainsmart"
#define BOARD_NAME "Sainsmart"
#undef FAN_PIN
#define FAN_PIN 7 // PART FAN in front of board next to Extruder heat
#define RAMPS_D10_PIN 9 // E
#define RAMPS_D9_PIN 7 // F PART FAN in front of board next to Extruder heat
// RAMPS_D8_PIN 8 // B
#define MOSFET_D_PIN 10 // F / E
#undef HEATER_0_PIN
#define HEATER_0_PIN 9 // EXTRUDER 1
#undef HEATER_1_PIN
#define HEATER_1_PIN 10 // EXTRUDER 2
#include "pins_RAMPS.h"