diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 904a24867..d74efa330 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/default/Configuration_adv.h b/Marlin/src/config/default/Configuration_adv.h
index 904a24867..d74efa330 100644
--- a/Marlin/src/config/default/Configuration_adv.h
+++ b/Marlin/src/config/default/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
index 7856d5bbb..3312831c5 100644
--- a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
+++ b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
index 8f7f4500f..33481688b 100644
--- a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
+++ b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h b/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
index fa5479967..721c99633 100644
--- a/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
+++ b/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/BIBO/TouchX/Configuration_adv.h b/Marlin/src/config/examples/BIBO/TouchX/Configuration_adv.h
index 1290e6f31..6d8a9309e 100644
--- a/Marlin/src/config/examples/BIBO/TouchX/Configuration_adv.h
+++ b/Marlin/src/config/examples/BIBO/TouchX/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
index 05fa86527..b6f6cb958 100644
--- a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
index 717b68bd4..47b4e8d31 100644
--- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
index 05fa86527..b6f6cb958 100644
--- a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/Cartesio/Configuration_adv.h b/Marlin/src/config/examples/Cartesio/Configuration_adv.h
index f790b7ba3..bc018543a 100644
--- a/Marlin/src/config/examples/Cartesio/Configuration_adv.h
+++ b/Marlin/src/config/examples/Cartesio/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
index a86afcb61..b039009a1 100755
--- a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h
index bceb67b6e..510f326c6 100644
--- a/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/Creality/Ender/Configuration_adv.h b/Marlin/src/config/examples/Creality/Ender/Configuration_adv.h
index 2606e1876..0952a2c8b 100644
--- a/Marlin/src/config/examples/Creality/Ender/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/Ender/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/Felix/Configuration_adv.h b/Marlin/src/config/examples/Felix/Configuration_adv.h
index bac8540c0..04a60dca1 100644
--- a/Marlin/src/config/examples/Felix/Configuration_adv.h
+++ b/Marlin/src/config/examples/Felix/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
index 0ed00612d..3fe6086b7 100644
--- a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
+++ b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
index 2f23568cf..8c9bad66b 100644
--- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
+++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h b/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h
index 63054c0b7..10e158ea9 100644
--- a/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h
+++ b/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/MakerParts/Configuration_adv.h b/Marlin/src/config/examples/MakerParts/Configuration_adv.h
index 202a2c7bb..251cc13ae 100644
--- a/Marlin/src/config/examples/MakerParts/Configuration_adv.h
+++ b/Marlin/src/config/examples/MakerParts/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
index c31833e7c..e8564fa5c 100644
--- a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
+++ b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
index ab6d32841..d19f36752 100644
--- a/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
+++ b/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
index 8cfc1a3c9..ab4923160 100644
--- a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
+++ b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
index 63f0f853c..9c427fc78 100644
--- a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
+++ b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/SCARA/Configuration_adv.h b/Marlin/src/config/examples/SCARA/Configuration_adv.h
index 00dab604d..5f535c7f2 100644
--- a/Marlin/src/config/examples/SCARA/Configuration_adv.h
+++ b/Marlin/src/config/examples/SCARA/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
index f0d5a79f3..dea3d7119 100644
--- a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
+++ b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/TheBorg/Configuration_adv.h b/Marlin/src/config/examples/TheBorg/Configuration_adv.h
index 191805b8e..b803b1331 100644
--- a/Marlin/src/config/examples/TheBorg/Configuration_adv.h
+++ b/Marlin/src/config/examples/TheBorg/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
index 39231c8a3..83e268851 100644
--- a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
+++ b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
index 1b9ce6938..0322af662 100644
--- a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
+++ b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
index fa8a289cd..ce7739563 100644
--- a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
+++ b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
@@ -198,7 +198,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
index de44a5193..a3c278774 100644
--- a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h	
+++ b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h	
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
index cbdc089f6..fd147fd35 100644
--- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h
index 3bef770e6..4c1ba8376 100644
--- a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
index 6939cde35..6f781bc95 100644
--- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/delta/generic/Configuration_adv.h b/Marlin/src/config/examples/delta/generic/Configuration_adv.h
index 6939cde35..6f781bc95 100644
--- a/Marlin/src/config/examples/delta/generic/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/generic/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
index 6939cde35..6f781bc95 100644
--- a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h
index 0b41d1965..9b836c723 100644
--- a/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h
@@ -190,7 +190,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
index b91d40c60..2a5e39e8b 100644
--- a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
index 73a71d2bf..231a00420 100644
--- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
+++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/makibox/Configuration_adv.h b/Marlin/src/config/examples/makibox/Configuration_adv.h
index acff5d82c..e98699f92 100644
--- a/Marlin/src/config/examples/makibox/Configuration_adv.h
+++ b/Marlin/src/config/examples/makibox/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
diff --git a/Marlin/src/config/examples/wt150/Configuration_adv.h b/Marlin/src/config/examples/wt150/Configuration_adv.h
index ddd7a078c..6bbb8be3a 100644
--- a/Marlin/src/config/examples/wt150/Configuration_adv.h
+++ b/Marlin/src/config/examples/wt150/Configuration_adv.h
@@ -185,7 +185,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif