Fix M106 with SINGLENOZZLE

This commit is contained in:
InsanityAutomation 2018-12-31 21:10:18 -05:00 committed by Scott Lahteine
parent 7557f8d68c
commit 4f2473053c

View file

@ -25,10 +25,11 @@
#if FAN_COUNT > 0 #if FAN_COUNT > 0
#include "../gcode.h" #include "../gcode.h"
#include "../../Marlin.h" // for fan_speed — should move those to Planner #include "../../Marlin.h" // for fan_speed
#include "../../module/motion.h"
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
#include "../../module/motion.h"
#include "../../module/tool_change.h" #include "../../module/tool_change.h"
#endif #endif
@ -46,36 +47,42 @@
* 3-255 = Set the speed for use with T2 * 3-255 = Set the speed for use with T2
*/ */
void GcodeSuite::M106() { void GcodeSuite::M106() {
const uint8_t p = parser.byteval('P'); const uint8_t p = parser.byteval('P', active_extruder);
const uint16_t s = parser.ushortval('S', 255);
#if ENABLED(SINGLENOZZLE) if (p < MIN(EXTRUDERS, FAN_COUNT)) {
if (p != active_extruder) { uint16_t s = parser.ushortval('S', 255);
if (p < EXTRUDERS) singlenozzle_fan_speed[p] = MIN(s, 255U); NOMORE(s, 255);
return;
} uint8_t np = p;
#endif
#if ENABLED(SINGLENOZZLE)
if (p != active_extruder) {
if (p < EXTRUDERS) singlenozzle_fan_speed[p] = s;
return;
}
np = 0; // Always use fan index 0 with SINGLENOZZLE
#endif
if (p < FAN_COUNT) {
#if ENABLED(EXTRA_FAN_SPEED) #if ENABLED(EXTRA_FAN_SPEED)
const int16_t t = parser.intval('T'); const int16_t t = parser.intval('T');
if (t > 0) { if (t > 0) {
switch (t) { switch (t) {
case 1: case 1:
fan_speed[p] = old_fan_speed[p]; fan_speed[np] = old_fan_speed[np];
break; break;
case 2: case 2:
old_fan_speed[p] = fan_speed[p]; old_fan_speed[np] = fan_speed[np];
fan_speed[p] = new_fan_speed[p]; fan_speed[np] = new_fan_speed[np];
break; break;
default: default:
new_fan_speed[p] = MIN(t, 255U); new_fan_speed[np] = MIN(t, 255U);
break; break;
} }
return; return;
} }
#endif // EXTRA_FAN_SPEED #endif // EXTRA_FAN_SPEED
fan_speed[p] = MIN(s, 255U);
fan_speed[np] = s;
} }
} }
@ -83,7 +90,8 @@ void GcodeSuite::M106() {
* M107: Fan Off * M107: Fan Off
*/ */
void GcodeSuite::M107() { void GcodeSuite::M107() {
const uint16_t p = parser.ushortval('P'); const uint16_t p = parser.byteval('P', active_extruder);
#if ENABLED(SINGLENOZZLE) #if ENABLED(SINGLENOZZLE)
if (p != active_extruder) { if (p != active_extruder) {
if (p < EXTRUDERS) singlenozzle_fan_speed[p] = 0; if (p < EXTRUDERS) singlenozzle_fan_speed[p] = 0;
@ -91,7 +99,7 @@ void GcodeSuite::M107() {
} }
#endif #endif
if (p < FAN_COUNT) fan_speed[p] = 0; if (p < MIN(EXTRUDERS, FAN_COUNT)) fan_speed[p] = 0;
} }
#endif // FAN_COUNT > 0 #endif // FAN_COUNT > 0