Fixed soft limits when the origin is in the middle.

HOME_POS is now always where the endstop is and can be outside the limits.
The limits are now defined by MIN_POS and MAX_POS rather than HOME_POS and MAX_LENGTH.
The Z is axis now homed first if direction is away from the bed.

Saguinololu limit pins change from MIN to MAX according to the homing direction.

Marlin/Configuration.h

@@ -187,9 +187,17 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th
 
 #define min_software_endstops true //If true, axis won't move to coordinates less than HOME_POS.
 #define max_software_endstops true  //If true, axis won't move to coordinates greater than the defined lengths below.
-#define X_MAX_LENGTH 205
+// Travel limits after homing
-#define Y_MAX_LENGTH 205
+#define X_MAX_POS 205
-#define Z_MAX_LENGTH 200
+#define X_MIN_POS 0
+#define Y_MAX_POS 205
+#define Y_MIN_POS 0
+#define Z_MAX_POS 200
+#define Z_MIN_POS 0
+
+#define X_MAX_LENGTH (X_MAX_POS - X_MIN_POS)
+#define Y_MAX_LENGTH (Y_MAX_POS - Y_MIN_POS)
+#define Z_MAX_LENGTH (Z_MAX_POS - Z_MIN_POS)
 
 // The position of the homing switches. Use MAX_LENGTH * -0.5 if the center should be 0, 0, 0
 #define X_HOME_POS 0

Marlin/Marlin.pde

@@ -562,7 +562,7 @@ bool code_seen(char code)
     plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder); \
     st_synchronize();\
     \
-    current_position[LETTER##_AXIS] = (LETTER##_HOME_DIR == -1) ? LETTER##_HOME_POS : LETTER##_MAX_LENGTH;\
+    current_position[LETTER##_AXIS] = LETTER##_HOME_POS;\
     destination[LETTER##_AXIS] = current_position[LETTER##_AXIS];\
     feedrate = 0.0;\
     endstops_hit_on_purpose();\
@@ -656,6 +656,13 @@ void process_commands()
       }
       feedrate = 0.0;
       home_all_axis = !((code_seen(axis_codes[0])) || (code_seen(axis_codes[1])) || (code_seen(axis_codes[2])));
+      
+      #if Z_HOME_DIR > 0                      // If homing away from BED do Z first
+      if((home_all_axis) || (code_seen(axis_codes[Z_AXIS]))) {
+        HOMEAXIS(Z);
+      }
+      #endif
+      
       #ifdef QUICK_HOME
       if((home_all_axis)||( code_seen(axis_codes[X_AXIS]) && code_seen(axis_codes[Y_AXIS])) )  //first diagonal move
       {
@@ -669,8 +676,8 @@ void process_commands()
         plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder);
         st_synchronize();
     
-        current_position[X_AXIS] = (X_HOME_DIR == -1) ? X_HOME_POS : X_MAX_LENGTH;
+        current_position[X_AXIS] = X_HOME_POS;
-        current_position[Y_AXIS] = (Y_HOME_DIR == -1) ? Y_HOME_POS : Y_MAX_LENGTH;
+        current_position[Y_AXIS] = Y_HOME_POS;
         plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
         destination[X_AXIS] = current_position[X_AXIS];
         destination[Y_AXIS] = current_position[Y_AXIS];
@@ -687,12 +694,14 @@ void process_commands()
       }
 
       if((home_all_axis) || (code_seen(axis_codes[Y_AXIS]))) {
-       HOMEAXIS(Y);
+        HOMEAXIS(Y);
       }
       
+      #if Z_HOME_DIR < 0                      // If homing towards BED do Z last
       if((home_all_axis) || (code_seen(axis_codes[Z_AXIS]))) {
         HOMEAXIS(Z);
       }
+      #endif
       
       if(code_seen(axis_codes[X_AXIS])) 
       {
@@ -1533,15 +1542,15 @@ void get_arc_coordinates()
 void prepare_move()
 {
   if (min_software_endstops) {
-    if (destination[X_AXIS] < X_HOME_POS) destination[X_AXIS] = X_HOME_POS;
+    if (destination[X_AXIS] < X_MIN_POS) destination[X_AXIS] = X_MIN_POS;
-    if (destination[Y_AXIS] < Y_HOME_POS) destination[Y_AXIS] = Y_HOME_POS;
+    if (destination[Y_AXIS] < Y_MIN_POS) destination[Y_AXIS] = Y_MIN_POS;
-    if (destination[Z_AXIS] < Z_HOME_POS) destination[Z_AXIS] = Z_HOME_POS;
+    if (destination[Z_AXIS] < Z_MIN_POS) destination[Z_AXIS] = Z_MIN_POS;
   }
 
   if (max_software_endstops) {
-    if (destination[X_AXIS] > X_MAX_LENGTH) destination[X_AXIS] = X_MAX_LENGTH;
+    if (destination[X_AXIS] > X_MAX_POS) destination[X_AXIS] = X_MAX_POS;
-    if (destination[Y_AXIS] > Y_MAX_LENGTH) destination[Y_AXIS] = Y_MAX_LENGTH;
+    if (destination[Y_AXIS] > Y_MAX_POS) destination[Y_AXIS] = Y_MAX_POS;
-    if (destination[Z_AXIS] > Z_MAX_LENGTH) destination[Z_AXIS] = Z_MAX_LENGTH;
+    if (destination[Z_AXIS] > Z_MAX_POS) destination[Z_AXIS] = Z_MAX_POS;
   }
   previous_millis_cmd = millis();  
   plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate*feedmultiply/60/100.0, active_extruder);

Marlin/pins.h

@@ -572,18 +572,33 @@
 
 #define X_STEP_PIN         15
 #define X_DIR_PIN          21
-#define X_MIN_PIN          18
+#if X_HOME_DIR < 0
-#define X_MAX_PIN           -1
+# define X_MIN_PIN          18 
+# define X_MAX_PIN          -1
+#else
+# define X_MIN_PIN          -1
+# define X_MAX_PIN          18
+#endif
 
 #define Y_STEP_PIN         22
 #define Y_DIR_PIN          23
-#define Y_MIN_PIN          19
+#if Y_HOME_DIR < 0
-#define Y_MAX_PIN          -1
+# define Y_MIN_PIN          19 
+# define Y_MAX_PIN          -1
+#else
+# define Y_MIN_PIN          -1
+# define Y_MAX_PIN          19
+#endif
 
 #define Z_STEP_PIN         3
 #define Z_DIR_PIN          2
-#define Z_MIN_PIN          20
+#if Z_HOME_DIR < 0
-#define Z_MAX_PIN          -1
+# define Z_MIN_PIN          20 
+# define Z_MAX_PIN          -1
+#else
+# define Z_MIN_PIN          -1
+# define Z_MAX_PIN          20
+#endif
 
 #define E0_STEP_PIN         1
 #define E0_DIR_PIN          0