Unify AVR90USB: Pins cleanup

This commit is contained in:
Scott Lahteine 2017-06-08 18:08:03 -05:00
parent 87d8223251
commit 5426fc1735
10 changed files with 211 additions and 207 deletions

View file

@ -134,9 +134,9 @@
#if ENABLED(VIKI2) || ENABLED(miniVIKI) #if ENABLED(VIKI2) || ENABLED(miniVIKI)
#undef SD_DETECT_PIN #undef SD_DETECT_PIN
#define SD_DETECT_PIN 49 // For easy adapter board #define SD_DETECT_PIN 49 // For easy adapter board
#undef BEEPER_PIN #undef BEEPER_PIN
#define BEEPER_PIN 12 // 33 isn't physically available to the LCD display #define BEEPER_PIN 12 // 33 isn't physically available to the LCD display
#else #else
#define STAT_LED_RED_PIN 32 #define STAT_LED_RED_PIN 32
#define STAT_LED_BLUE_PIN 35 #define STAT_LED_BLUE_PIN 35
@ -146,9 +146,9 @@
// Misc. Functions // Misc. Functions
// //
#if ENABLED(CASE_LIGHT_ENABLE) && PIN_EXISTS(CASE_LIGHT) && defined(DOGLCD_A0) && DOGLCD_A0 == CASE_LIGHT_PIN #if ENABLED(CASE_LIGHT_ENABLE) && PIN_EXISTS(CASE_LIGHT) && defined(DOGLCD_A0) && DOGLCD_A0 == CASE_LIGHT_PIN
#undef DOGLCD_A0 // steal pin 44 for the case light; if you have a Viki2 and have connected it #undef DOGLCD_A0 // Steal pin 44 for the case light; if you have a Viki2 and have connected it
#define DOGLCD_A0 57 // following the Panucatt wiring diagram, you may need to tweak these pin assignments #define DOGLCD_A0 57 // following the Panucatt wiring diagram, you may need to tweak these pin assignments
// as the wiring diagram uses pin 44 for DOGLCD_A0 // as the wiring diagram uses pin 44 for DOGLCD_A0
#endif #endif
// //

View file

@ -107,7 +107,7 @@
// //
#define SDSS 17 #define SDSS 17
#define DEBUG_PIN 0 #define DEBUG_PIN 0
#define CASE_LIGHT_PIN 16 // MUST BE HARDWARE PWM #define CASE_LIGHT_PIN 16 // MUST BE HARDWARE PWM
// RS485 pins // RS485 pins
#define TX_ENABLE_PIN 12 #define TX_ENABLE_PIN 12
@ -116,6 +116,6 @@
// //
// M3/M4/M5 - Spindle/Laser Control // M3/M4/M5 - Spindle/Laser Control
// //
#define SPINDLE_LASER_ENABLE_PIN 5 // Pin should have a pullup/pulldown! #define SPINDLE_LASER_ENABLE_PIN 5 // Pin should have a pullup/pulldown!
#define SPINDLE_LASER_PWM_PIN 16 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 16 // MUST BE HARDWARE PWM
#define SPINDLE_DIR_PIN 6 #define SPINDLE_DIR_PIN 6

View file

@ -96,14 +96,14 @@
// Heaters // Heaters
// //
#define HEATER_0_PIN 4 #define HEATER_0_PIN 4
#define HEATER_BED_PIN 3 // (bed) #define HEATER_BED_PIN 3 // (bed)
// //
// Misc. Functions // Misc. Functions
// //
#define SDSS 31 // SCL pin of I2C header || CS Pin for SD Card support #define SDSS 31 // SCL pin of I2C header || CS Pin for SD Card support
#define PS_ON_PIN 19 #define PS_ON_PIN 19
#define CASE_LIGHT_PIN 15 // MUST BE HARDWARE PWM #define CASE_LIGHT_PIN 15 // MUST BE HARDWARE PWM
// A pin for debugging // A pin for debugging
#define DEBUG_PIN -1 #define DEBUG_PIN -1

View file

@ -131,7 +131,7 @@
#define SDSS 53 #define SDSS 53
#define LED_PIN 13 #define LED_PIN 13
#define PS_ON_PIN 12 #define PS_ON_PIN 12
#define CASE_LIGHT_PIN 45 // try the keypad connector #define CASE_LIGHT_PIN 45 // Try the keypad connector
// //
// LCD / Controller // LCD / Controller
@ -144,9 +144,9 @@
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
#define LCD_PINS_RS 56 // CS chip select / SS chip slave select #define LCD_PINS_RS 56 // CS chip select / SS chip slave select
#define LCD_PINS_ENABLE 51 // SID (MOSI) #define LCD_PINS_ENABLE 51 // SID (MOSI)
#define LCD_PINS_D4 52 // SCK (CLK) clock #define LCD_PINS_D4 52 // SCK (CLK) clock
#define SD_DETECT_PIN 35 #define SD_DETECT_PIN 35
#else #else

View file

@ -64,20 +64,20 @@
// //
// Servos // Servos
// //
#define SERVO0_PIN 36 // C1 (1280-EX1) #define SERVO0_PIN 36 // C1 (1280-EX1)
#define SERVO1_PIN 37 // C0 (1280-EX2) #define SERVO1_PIN 37 // C0 (1280-EX2)
#define SERVO2_PIN 40 // G1 (1280-EX3) #define SERVO2_PIN 40 // G1 (1280-EX3)
#define SERVO3_PIN 41 // G0 (1280-EX4) #define SERVO3_PIN 41 // G0 (1280-EX4)
// //
// Limit Switches // Limit Switches
// //
#define X_MIN_PIN 49 // L0 #define X_MIN_PIN 49 // L0
#define X_MAX_PIN 48 // L1 #define X_MAX_PIN 48 // L1
#define Y_MIN_PIN 47 // L2 #define Y_MIN_PIN 47 // L2
#define Y_MAX_PIN 46 // L3 #define Y_MAX_PIN 46 // L3
#define Z_MIN_PIN 43 // L6 #define Z_MIN_PIN 43 // L6
#define Z_MAX_PIN 42 // L7 #define Z_MAX_PIN 42 // L7
// //
// Z Probe (when not Z_MIN_PIN) // Z Probe (when not Z_MIN_PIN)
@ -89,25 +89,25 @@
// //
// Steppers // Steppers
// //
#define X_STEP_PIN 55 // F1 #define X_STEP_PIN 55 // F1
#define X_DIR_PIN 54 // F0 #define X_DIR_PIN 54 // F0
#define X_ENABLE_PIN 56 // F2 #define X_ENABLE_PIN 56 // F2
#define Y_STEP_PIN 59 // F5 #define Y_STEP_PIN 59 // F5
#define Y_DIR_PIN 58 // F4 #define Y_DIR_PIN 58 // F4
#define Y_ENABLE_PIN 60 // F6 #define Y_ENABLE_PIN 60 // F6
#define Z_STEP_PIN 63 // K1 #define Z_STEP_PIN 63 // K1
#define Z_DIR_PIN 62 // K0 #define Z_DIR_PIN 62 // K0
#define Z_ENABLE_PIN 64 // K2 #define Z_ENABLE_PIN 64 // K2
#define E0_STEP_PIN 25 // A3 #define E0_STEP_PIN 25 // A3
#define E0_DIR_PIN 24 // A2 #define E0_DIR_PIN 24 // A2
#define E0_ENABLE_PIN 26 // A4 #define E0_ENABLE_PIN 26 // A4
#define E1_STEP_PIN 29 // A7 #define E1_STEP_PIN 29 // A7
#define E1_DIR_PIN 28 // A6 #define E1_DIR_PIN 28 // A6
#define E1_ENABLE_PIN 39 // G2 #define E1_ENABLE_PIN 39 // G2
// //
// I2C Digipots - MCP4018 // I2C Digipots - MCP4018
@ -115,17 +115,17 @@
// Set from 0 - 127 with stop bit. // Set from 0 - 127 with stop bit.
// (Ex. 3F << 1 | 1) // (Ex. 3F << 1 | 1)
// //
#define DIGIPOTS_I2C_SCL 76 // J5 #define DIGIPOTS_I2C_SCL 76 // J5
#define DIGIPOTS_I2C_SDA_X 57 // F3 #define DIGIPOTS_I2C_SDA_X 57 // F3
#define DIGIPOTS_I2C_SDA_Y 61 // F7 #define DIGIPOTS_I2C_SDA_Y 61 // F7
#define DIGIPOTS_I2C_SDA_Z 65 // K3 #define DIGIPOTS_I2C_SDA_Z 65 // K3
#define DIGIPOTS_I2C_SDA_E0 27 // A5 #define DIGIPOTS_I2C_SDA_E0 27 // A5
#define DIGIPOTS_I2C_SDA_E1 77 // J6 #define DIGIPOTS_I2C_SDA_E1 77 // J6
// //
// Temperature Sensors // Temperature Sensors
// //
#define TEMP_BED_PIN 69 // K7 #define TEMP_BED_PIN 69 // K7
// SPI for Max6675 or Max31855 Thermocouple // SPI for Max6675 or Max31855 Thermocouple
// Uses a separate SPI bus // Uses a separate SPI bus
@ -135,10 +135,10 @@
// 2 E4 CS2 // 2 E4 CS2
// 78 E2 SCK // 78 E2 SCK
// //
#define THERMO_SCK_PIN 78 // E2 #define THERMO_SCK_PIN 78 // E2
#define THERMO_DO_PIN 3 // E5 #define THERMO_DO_PIN 3 // E5
#define THERMO_CS1 5 // E3 #define THERMO_CS1 5 // E3
#define THERMO_CS2 2 // E4 #define THERMO_CS2 2 // E4
#define MAX6675_SS THERMO_CS1 #define MAX6675_SS THERMO_CS1
#define MAX6675_SCK_PIN THERMO_SCK_PIN #define MAX6675_SCK_PIN THERMO_SCK_PIN
@ -150,10 +150,10 @@
// 2 extruders or 1 extruder and a heated bed. // 2 extruders or 1 extruder and a heated bed.
// With no heated bed, an additional 24V fan is possible. // With no heated bed, an additional 24V fan is possible.
// //
#define MOSFET_A_PIN 6 // H3 #define MOSFET_A_PIN 6 // H3
#define MOSFET_B_PIN 11 // B5 - Rev A of this file had this pin assigned to 9 #define MOSFET_B_PIN 11 // B5 - Rev A of this file had this pin assigned to 9
#define MOSFET_C_PIN 45 // L4 #define MOSFET_C_PIN 45 // L4
#define MOSFET_D_PIN 44 // L5 #define MOSFET_D_PIN 44 // L5
#if HOTENDS > 1 #if HOTENDS > 1
#if TEMP_SENSOR_BED #if TEMP_SENSOR_BED
@ -195,43 +195,43 @@
// //
// Extruder Auto Fan Pins // Extruder Auto Fan Pins
// //
#define ORIG_E0_AUTO_FAN_PIN 7 // H4 #define ORIG_E0_AUTO_FAN_PIN 7 // H4
#define ORIG_E1_AUTO_FAN_PIN 12 // B6 #define ORIG_E1_AUTO_FAN_PIN 12 // B6
// //
// Misc. Functions // Misc. Functions
// //
#define LED_PIN 13 // B7 #define LED_PIN 13 // B7
#define CUTOFF_RESET_PIN 16 // H1 #define CUTOFF_RESET_PIN 16 // H1
#define CUTOFF_TEST_PIN 17 // H0 #define CUTOFF_TEST_PIN 17 // H0
#define CASE_LIGHT_PIN 44 // L5 MUST BE HARDWARE PWM #define CASE_LIGHT_PIN 44 // L5 MUST BE HARDWARE PWM
// //
// LCD / Controller // LCD / Controller
// //
#ifdef REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER #ifdef REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
#define LCD_PINS_RS 33 // C4, LCD-STROBE #define LCD_PINS_RS 33 // C4: LCD-STROBE
#define LCD_PINS_ENABLE 72 // J2, LEFT #define LCD_PINS_ENABLE 72 // J2: LEFT
#define LCD_PINS_D4 35 // C2, LCD-CLK #define LCD_PINS_D4 35 // C2: LCD-CLK
#define LCD_PINS_D5 32 // C5, RLED #define LCD_PINS_D5 32 // C5: RLED
#define LCD_PINS_D6 34 // C3, LCD-DATA #define LCD_PINS_D6 34 // C3: LCD-DATA
#define LCD_PINS_D7 31 // C6, GLED #define LCD_PINS_D7 31 // C6: GLED
#define BTN_EN2 75 // J4, UP #define BTN_EN2 75 // J4, UP
#define BTN_EN1 73 // J3, DOWN #define BTN_EN1 73 // J3, DOWN
//STOP button connected as KILL_PIN //STOP button connected as KILL_PIN
#define KILL_PIN 14 // J1, RIGHT #define KILL_PIN 14 // J1, RIGHT
//KILL - not connected //KILL - not connected
#define BEEPER_PIN 8 // H5, SD_WP #define BEEPER_PIN 8 // H5, SD_WP
#define BTN_CENTER 15 // J0 #define BTN_CENTER 15 // J0
#define BTN_ENC BTN_CENTER #define BTN_ENC BTN_CENTER
//on board leds //on board leds
#define STAT_LED_RED_LED SERVO0_PIN // C1 (1280-EX1, DEBUG2) #define STAT_LED_RED_LED SERVO0_PIN // C1 (1280-EX1, DEBUG2)
#define STAT_LED_BLUE_PIN SERVO1_PIN // C0 (1280-EX2, DEBUG3) #define STAT_LED_BLUE_PIN SERVO1_PIN // C0 (1280-EX2, DEBUG3)
#else #else
// Replicator uses a 3-wire SR controller with HD44780 // Replicator uses a 3-wire SR controller with HD44780
@ -239,29 +239,29 @@
// //
#define SAV_3DLCD #define SAV_3DLCD
#define SR_DATA_PIN 34 // C3 #define SR_DATA_PIN 34 // C3
#define SR_CLK_PIN 35 // C2 #define SR_CLK_PIN 35 // C2
#define SR_STROBE_PIN 33 // C4 #define SR_STROBE_PIN 33 // C4
#define BTN_UP 75 // J4 #define BTN_UP 75 // J4
#define BTN_DOWN 73 // J3 #define BTN_DOWN 73 // J3
#define BTN_LEFT 72 // J2 #define BTN_LEFT 72 // J2
#define BTN_RIGHT 14 // J1 #define BTN_RIGHT 14 // J1
#define BTN_CENTER 15 // J0 #define BTN_CENTER 15 // J0
#define BTN_ENC BTN_CENTER #define BTN_ENC BTN_CENTER
#define BEEPER_PIN 4 // G5 #define BEEPER_PIN 4 // G5
#define STAT_LED_RED_PIN 32 // C5 #define STAT_LED_RED_PIN 32 // C5
#define STAT_LED_BLUE_PIN 31 // C6 (Actually green) #define STAT_LED_BLUE_PIN 31 // C6 (Actually green)
#endif #endif
// //
// SD Card // SD Card
// //
#define SDSS 53 // B0 #define SDSS 53 // B0
#define SD_DETECT_PIN 9 // H6 #define SD_DETECT_PIN 9 // H6
#define MAX_PIN THERMO_SCK_PIN #define MAX_PIN THERMO_SCK_PIN
@ -275,9 +275,6 @@
// Check if all pins are defined in mega/pins_arduino.h // Check if all pins are defined in mega/pins_arduino.h
#include <Arduino.h> #include <Arduino.h>
static_assert(NUM_DIGITAL_PINS > MAX_PIN, "add missing pins to [arduino dir]/hardware/arduino/avr/variants/mega/pins_arduino.h based on fastio.h" static_assert(NUM_DIGITAL_PINS > MAX_PIN, "add missing pins to [arduino dir]/hardware/arduino/avr/variants/mega/pins_arduino.h based on fastio.h"

View file

@ -104,9 +104,9 @@
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
#define LCD_PINS_RS 15 // CS chip select /SS chip slave select #define LCD_PINS_RS 15 // CS chip select /SS chip slave select
#define LCD_PINS_ENABLE 11 // SID (MOSI) #define LCD_PINS_ENABLE 11 // SID (MOSI)
#define LCD_PINS_D4 10 // SCK (CLK) clock #define LCD_PINS_D4 10 // SCK (CLK) clock
#define BTN_EN1 18 #define BTN_EN1 18
#define BTN_EN2 17 #define BTN_EN2 17

View file

@ -151,12 +151,12 @@
#if ENABLED(NEWPANEL) #if ENABLED(NEWPANEL)
#define LCD_PINS_RS 70 #define LCD_PINS_RS 70
#define LCD_PINS_ENABLE 71 #define LCD_PINS_ENABLE 71
#define LCD_PINS_D4 72 #define LCD_PINS_D4 72
#define LCD_PINS_D5 73 #define LCD_PINS_D5 73
#define LCD_PINS_D6 74 #define LCD_PINS_D6 74
#define LCD_PINS_D7 75 #define LCD_PINS_D7 75
#if ENABLED(VIKI2) || ENABLED(miniVIKI) #if ENABLED(VIKI2) || ENABLED(miniVIKI)
#define BEEPER_PIN 44 #define BEEPER_PIN 44
@ -202,12 +202,12 @@
//#define SHIFT_OUT 40 //#define SHIFT_OUT 40
//#define SHIFT_EN 17 //#define SHIFT_EN 17
#define LCD_PINS_RS 75 #define LCD_PINS_RS 75
#define LCD_PINS_ENABLE 17 #define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23 #define LCD_PINS_D4 23
#define LCD_PINS_D5 25 #define LCD_PINS_D5 25
#define LCD_PINS_D6 27 #define LCD_PINS_D6 27
#define LCD_PINS_D7 29 #define LCD_PINS_D7 29
#endif // !NEWPANEL #endif // !NEWPANEL

View file

@ -220,25 +220,25 @@
#if ENABLED(ULTRA_LCD) #if ENABLED(ULTRA_LCD)
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
#define LCD_PINS_RS 49 // CS chip select /SS chip slave select #define LCD_PINS_RS 49 // CS chip select /SS chip slave select
#define LCD_PINS_ENABLE 51 // SID (MOSI) #define LCD_PINS_ENABLE 51 // SID (MOSI)
#define LCD_PINS_D4 52 // SCK (CLK) clock #define LCD_PINS_D4 52 // SCK (CLK) clock
#elif ENABLED(NEWPANEL) && ENABLED(PANEL_ONE) #elif ENABLED(NEWPANEL) && ENABLED(PANEL_ONE)
#define LCD_PINS_RS 40 #define LCD_PINS_RS 40
#define LCD_PINS_ENABLE 42 #define LCD_PINS_ENABLE 42
#define LCD_PINS_D4 65 #define LCD_PINS_D4 65
#define LCD_PINS_D5 66 #define LCD_PINS_D5 66
#define LCD_PINS_D6 44 #define LCD_PINS_D6 44
#define LCD_PINS_D7 64 #define LCD_PINS_D7 64
#else #else
#define LCD_PINS_RS 16 #define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17 #define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23 #define LCD_PINS_D4 23
#define LCD_PINS_D5 25 #define LCD_PINS_D5 25
#define LCD_PINS_D6 27 #define LCD_PINS_D6 27
#define LCD_PINS_D7 29 #define LCD_PINS_D7 29
#if DISABLED(NEWPANEL) #if DISABLED(NEWPANEL)
#define BEEPER_PIN 33 #define BEEPER_PIN 33
// Buttons are attached to a shift register // Buttons are attached to a shift register
// Not wired yet // Not wired yet
//#define SHIFT_CLK 38 //#define SHIFT_CLK 38
@ -251,118 +251,125 @@
#if ENABLED(NEWPANEL) #if ENABLED(NEWPANEL)
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#define BEEPER_PIN 37
#define BTN_EN1 31 #define BEEPER_PIN 37
#define BTN_EN2 33
#define BTN_ENC 35
#define SD_DETECT_PIN 49 #define BTN_EN1 31
#define KILL_PIN 41 #define BTN_EN2 33
#define BTN_ENC 35
#define SD_DETECT_PIN 49
#define KILL_PIN 41
#if ENABLED(BQ_LCD_SMART_CONTROLLER) #if ENABLED(BQ_LCD_SMART_CONTROLLER)
#define LCD_BACKLIGHT_PIN 39 #define LCD_BACKLIGHT_PIN 39
#endif #endif
#elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD) #elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
#define BTN_EN1 64
#define BTN_EN2 59 #define BTN_EN1 64
#define BTN_ENC 63 #define BTN_EN2 59
#define SD_DETECT_PIN 42 #define BTN_ENC 63
#define SD_DETECT_PIN 42
#elif ENABLED(LCD_I2C_PANELOLU2) #elif ENABLED(LCD_I2C_PANELOLU2)
#define BTN_EN1 47 // reverse if the encoder turns the wrong way.
#define BTN_EN2 43 #define BTN_EN1 47
#define BTN_ENC 32 #define BTN_EN2 43
#define LCD_SDSS 53 #define BTN_ENC 32
#define SD_DETECT_PIN -1 #define LCD_SDSS 53
#define KILL_PIN 41 #define SD_DETECT_PIN -1
#define KILL_PIN 41
#elif ENABLED(LCD_I2C_VIKI) #elif ENABLED(LCD_I2C_VIKI)
#define BTN_EN1 22 // reverse if the encoder turns the wrong way.
#define BTN_EN2 7 // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf #define BTN_EN1 22 // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42.
// tells about 40/42. #define BTN_EN2 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13.
// 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13.
#define BTN_ENC -1 #define BTN_ENC -1
#define LCD_SDSS 53 #define LCD_SDSS 53
#define SD_DETECT_PIN 49 #define SD_DETECT_PIN 49
#elif ENABLED(VIKI2) || ENABLED(miniVIKI) #elif ENABLED(VIKI2) || ENABLED(miniVIKI)
#define BEEPER_PIN 33
#define BEEPER_PIN 33
// Pins for DOGM SPI LCD Support // Pins for DOGM SPI LCD Support
#define DOGLCD_A0 44 #define DOGLCD_A0 44
#define DOGLCD_CS 45 #define DOGLCD_CS 45
#define LCD_SCREEN_ROT_180 #define LCD_SCREEN_ROT_180
#define BTN_EN1 22 #define BTN_EN1 22
#define BTN_EN2 7 #define BTN_EN2 7
#define BTN_ENC 39 #define BTN_ENC 39
#define SDSS 53 #define SDSS 53
#define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board #define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board
#define KILL_PIN 31 #define KILL_PIN 31
#define STAT_LED_RED_PIN 32 #define STAT_LED_RED_PIN 32
#define STAT_LED_BLUE_PIN 35 #define STAT_LED_BLUE_PIN 35
#elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
#define BTN_EN1 35 // reverse if the encoder turns the wrong way. #define BTN_EN1 35
#define BTN_EN2 37 #define BTN_EN2 37
#define BTN_ENC 31 #define BTN_ENC 31
#define SD_DETECT_PIN 49 #define SD_DETECT_PIN 49
#define LCD_SDSS 53 #define LCD_SDSS 53
#define KILL_PIN 41 #define KILL_PIN 41
#define BEEPER_PIN 23 #define BEEPER_PIN 23
#define DOGLCD_CS 29 #define DOGLCD_CS 29
#define DOGLCD_A0 27 #define DOGLCD_A0 27
#define LCD_BACKLIGHT_PIN 33 #define LCD_BACKLIGHT_PIN 33
#elif ENABLED(MINIPANEL) #elif ENABLED(MINIPANEL)
#define BEEPER_PIN 42 #define BEEPER_PIN 42
// Pins for DOGM SPI LCD Support // Pins for DOGM SPI LCD Support
#define DOGLCD_A0 44 #define DOGLCD_A0 44
#define DOGLCD_CS 66 #define DOGLCD_CS 66
#define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65 #define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65
#define SDSS 53 #define SDSS 53
#define KILL_PIN 64 #define KILL_PIN 64
// GLCD features // GLCD features
//#define LCD_CONTRAST 190 //#define LCD_CONTRAST 190
// Uncomment screen orientation // Uncomment screen orientation
//#define LCD_SCREEN_ROT_90 //#define LCD_SCREEN_ROT_90
//#define LCD_SCREEN_ROT_180 //#define LCD_SCREEN_ROT_180
//#define LCD_SCREEN_ROT_270 //#define LCD_SCREEN_ROT_270
// The encoder and click button // The encoder and click button
#define BTN_EN1 40 #define BTN_EN1 40
#define BTN_EN2 63 #define BTN_EN2 63
#define BTN_ENC 59 #define BTN_ENC 59
// not connected to a pin // not connected to a pin
#define SD_DETECT_PIN 49 #define SD_DETECT_PIN 49
#else #else
// Beeper on AUX-4 // Beeper on AUX-4
#define BEEPER_PIN 33 #define BEEPER_PIN 33
// buttons are directly attached using AUX-2 // buttons are directly attached using AUX-2
#if ENABLED(REPRAPWORLD_KEYPAD) #if ENABLED(REPRAPWORLD_KEYPAD)
#define BTN_EN1 64 // encoder #define BTN_EN1 64
#define BTN_EN2 59 // encoder #define BTN_EN2 59
#define BTN_ENC 63 // enter button #define BTN_ENC 63
#define SHIFT_OUT 40 // shift register #define SHIFT_OUT 40
#define SHIFT_CLK 44 // shift register #define SHIFT_CLK 44
#define SHIFT_LD 42 // shift register #define SHIFT_LD 42
#elif ENABLED(PANEL_ONE) #elif ENABLED(PANEL_ONE)
#define BTN_EN1 59 // AUX2 PIN 3 #define BTN_EN1 59 // AUX2 PIN 3
#define BTN_EN2 63 // AUX2 PIN 4 #define BTN_EN2 63 // AUX2 PIN 4
#define BTN_ENC 49 // AUX3 PIN 7 #define BTN_ENC 49 // AUX3 PIN 7
#else #else
#define BTN_EN1 37 #define BTN_EN1 37
#define BTN_EN2 35 #define BTN_EN2 35
#define BTN_ENC 31 // the click #define BTN_ENC 31
#endif #endif
#if ENABLED(G3D_PANEL) #if ENABLED(G3D_PANEL)
#define SD_DETECT_PIN 49 #define SD_DETECT_PIN 49
#define KILL_PIN 41 #define KILL_PIN 41
#else #else
//#define SD_DETECT_PIN -1 // Ramps doesn't use this //#define SD_DETECT_PIN -1 // Ramps doesn't use this
#endif #endif

View file

@ -126,21 +126,21 @@
// //
// LCD / Controller // LCD / Controller
// //
#define LCD_PINS_RS 70 // Ext2_5 #define LCD_PINS_RS 70 // Ext2_5
#define LCD_PINS_ENABLE 71 // Ext2_7 #define LCD_PINS_ENABLE 71 // Ext2_7
#define LCD_PINS_D4 72 // Ext2_9 ? #define LCD_PINS_D4 72 // Ext2_9 ?
#define LCD_PINS_D5 73 // Ext2_11 ? #define LCD_PINS_D5 73 // Ext2_11 ?
#define LCD_PINS_D6 74 // Ext2_13 #define LCD_PINS_D6 74 // Ext2_13
#define LCD_PINS_D7 75 // Ext2_15 ? #define LCD_PINS_D7 75 // Ext2_15 ?
#define BEEPER_PIN -1 #define BEEPER_PIN -1
#define BTN_HOME 80 // Ext_16 #define BTN_HOME 80 // Ext_16
#define BTN_CENTER 81 // Ext_14 #define BTN_CENTER 81 // Ext_14
#define BTN_ENC BTN_CENTER #define BTN_ENC BTN_CENTER
#define BTN_RIGHT 82 // Ext_12 #define BTN_RIGHT 82 // Ext_12
#define BTN_LEFT 83 // Ext_10 #define BTN_LEFT 83 // Ext_10
#define BTN_UP 84 // Ext2_8 #define BTN_UP 84 // Ext2_8
#define BTN_DOWN 85 // Ext2_6 #define BTN_DOWN 85 // Ext2_6
#define HOME_PIN BTN_HOME #define HOME_PIN BTN_HOME
@ -151,7 +151,7 @@
#define DOGLCD_CS 71 #define DOGLCD_CS 71
#define LCD_SCREEN_ROT_180 #define LCD_SCREEN_ROT_180
#define SD_DETECT_PIN -1 // Pin 72 if using easy adapter board #define SD_DETECT_PIN -1 // Pin 72 if using easy adapter board
#define STAT_LED_RED_PIN 22 #define STAT_LED_RED_PIN 22
#define STAT_LED_BLUE_PIN 32 #define STAT_LED_BLUE_PIN 32

View file

@ -109,7 +109,7 @@
#define SDSS 53 #define SDSS 53
#define LED_PIN 13 #define LED_PIN 13
#define PS_ON_PIN 12 #define PS_ON_PIN 12
#define SUICIDE_PIN 54 // PIN that has to be turned on right after start, to keep power flowing. #define SUICIDE_PIN 54 // PIN that has to be turned on right after start, to keep power flowing.
#define CASE_LIGHT_PIN 8 #define CASE_LIGHT_PIN 8
// //
@ -121,12 +121,12 @@
#if ENABLED(NEWPANEL) #if ENABLED(NEWPANEL)
#define LCD_PINS_RS 20 #define LCD_PINS_RS 20
#define LCD_PINS_ENABLE 17 #define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 16 #define LCD_PINS_D4 16
#define LCD_PINS_D5 21 #define LCD_PINS_D5 21
#define LCD_PINS_D6 5 #define LCD_PINS_D6 5
#define LCD_PINS_D7 6 #define LCD_PINS_D7 6
// buttons are directly attached // buttons are directly attached
#define BTN_EN1 40 #define BTN_EN1 40