SunRed/Marlin-Artillery-M600
Archived
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity

General cleanup

Browse source
This commit is contained in:
Scott Lahteine 2020-07-14 21:26:09 -05:00
parent e78f19bc87
commit 55e519a06f
4 changed files with 18 additions and 20 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

4
Marlin/src/lcd/menu/menu_motion.cpp
View file

@ -139,9 +139,7 @@ void lcd_move_z() { _lcd_move_xyz(GET_TEXT(MSG_MOVE_Z), Z_AXIS); }
ui.encoderPosition = 0;
}
if (ui.should_draw()) {
#if MULTI_MANUAL
MenuItemBase::init(eindex);
#endif
TERN_(MULTI_MANUAL, MenuItemBase::init(eindex));
MenuEditItemBase::draw_edit_screen(
GET_TEXT(TERN(MULTI_MANUAL, MSG_MOVE_EN, MSG_MOVE_E)),
ftostr41sign(current_position.e

26
Marlin/src/module/stepper.cpp
View file

@ -168,22 +168,19 @@ bool Stepper::abort_current_block;
#if EITHER(Z_MULTI_ENDSTOPS, Z_STEPPER_AUTO_ALIGN)
bool Stepper::locked_Z_motor = false, Stepper::locked_Z2_motor = false
#if NUM_Z_STEPPER_DRIVERS >= 3
, Stepper::locked_Z3_motor = false
#if NUM_Z_STEPPER_DRIVERS >= 4
, Stepper::locked_Z4_motor = false
#endif
#endif
;
#if NUM_Z_STEPPER_DRIVERS >= 3
, Stepper::locked_Z3_motor = false
#if NUM_Z_STEPPER_DRIVERS >= 4
, Stepper::locked_Z4_motor = false
#endif
#endif
;
#endif
uint32_t Stepper::acceleration_time, Stepper::deceleration_time;
uint8_t Stepper::steps_per_isr;
#if DISABLED(ADAPTIVE_STEP_SMOOTHING)
constexpr
#endif
uint8_t Stepper::oversampling_factor;
TERN(ADAPTIVE_STEP_SMOOTHING,,constexpr) uint8_t Stepper::oversampling_factor;
xyze_long_t Stepper::delta_error{0};
@ -2099,17 +2096,18 @@ uint32_t Stepper::block_phase_isr() {
// No acceleration / deceleration time elapsed so far
acceleration_time = deceleration_time = 0;
uint8_t oversampling = 0; // Assume no axis smoothing (via oversampling)
#if ENABLED(ADAPTIVE_STEP_SMOOTHING)
uint8_t oversampling = 0; // Assume no axis smoothing (via oversampling)
// Decide if axis smoothing is possible
uint32_t max_rate = current_block->nominal_rate; // Get the maximum rate (maximum event speed)
uint32_t max_rate = current_block->nominal_rate; // Get the maximum rate (maximum event speed)
while (max_rate < MIN_STEP_ISR_FREQUENCY) { // As long as more ISRs are possible...
max_rate <<= 1; // Try to double the rate
if (max_rate >= MAX_STEP_ISR_FREQUENCY_1X) break; // Don't exceed the estimated ISR limit
++oversampling; // Increase the oversampling (used for left-shift)
}
oversampling_factor = oversampling; // For all timer interval calculations
#else
constexpr uint8_t oversampling = 0;
#endif
// Based on the oversampling factor, do the calculations

3
Marlin/src/module/stepper.h
View file

@ -191,7 +191,6 @@
#error "Expected at least one of MINIMUM_STEPPER_PULSE or MAXIMUM_STEPPER_RATE to be defined"
#endif
// But the user could be enforcing a minimum time, so the loop time is
#define ISR_LOOP_CYCLES (ISR_LOOP_BASE_CYCLES + _MAX(MIN_STEPPER_PULSE_CYCLES, MIN_ISR_LOOP_CYCLES))
@ -558,7 +557,7 @@ class Stepper {
// In case of high-performance processor, it is able to calculate in real-time
timer = uint32_t(STEPPER_TIMER_RATE) / step_rate;
#else
constexpr uint32_t min_step_rate = F_CPU / 500000U;
constexpr uint32_t min_step_rate = (F_CPU) / 500000U;
NOLESS(step_rate, min_step_rate);
step_rate -= min_step_rate; // Correct for minimal speed
if (step_rate >= (8 * 256)) { // higher step rate

5
Marlin/src/module/temperature.cpp
View file

@ -907,7 +907,10 @@ void Temperature::min_temp_error(const heater_ind_t heater) {
SERIAL_ECHOPAIR(STR_PID_DEBUG, ee, STR_PID_DEBUG_INPUT, temp_hotend[ee].celsius, STR_PID_DEBUG_OUTPUT, pid_output);
#if DISABLED(PID_OPENLOOP)
{
SERIAL_ECHOPAIR( STR_PID_DEBUG_PTERM, work_pid[ee].Kp, STR_PID_DEBUG_ITERM, work_pid[ee].Ki, STR_PID_DEBUG_DTERM, work_pid[ee].Kd
SERIAL_ECHOPAIR(
STR_PID_DEBUG_PTERM, work_pid[ee].Kp,
STR_PID_DEBUG_ITERM, work_pid[ee].Ki,
STR_PID_DEBUG_DTERM, work_pid[ee].Kd
#if ENABLED(PID_EXTRUSION_SCALING)
, STR_PID_DEBUG_CTERM, work_pid[ee].Kc
#endif