Add Leapfrog Xeed 2015 support (#16400)

This commit is contained in:
Jason Smith 2020-01-02 22:04:13 -06:00 committed by Scott Lahteine
parent 21dc07c40a
commit 595e684658
3 changed files with 118 additions and 0 deletions

View file

@ -138,6 +138,7 @@
#define BOARD_GT2560_V3_A20 1318 // Geeetech GT2560 Rev B for A20(M/D) #define BOARD_GT2560_V3_A20 1318 // Geeetech GT2560 Rev B for A20(M/D)
#define BOARD_EINSTART_S 1319 // Einstart retrofit #define BOARD_EINSTART_S 1319 // Einstart retrofit
#define BOARD_WANHAO_ONEPLUS 1320 // Wanhao 0ne+ i3 Mini #define BOARD_WANHAO_ONEPLUS 1320 // Wanhao 0ne+ i3 Mini
#define BOARD_LEAPFROG_XEED2015 1321 // Leapfrog Xeed 2015
// //
// ATmega1281, ATmega2561 // ATmega1281, ATmega2561

View file

@ -0,0 +1,115 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* Leapfrog Xeed Driver board pin assignments
*
* This board is used by other Leapfrog printers in addition to the Xeed,
* such as the Creatr HS and Bolt. The pin assignments vary wildly between
* printer models. As such this file is currently specific to the Xeed.
*/
#ifndef __AVR_ATmega2560__
#error "Oops! Select 'Mega 2560' in 'Tools > Board.'"
#endif
#define BOARD_INFO_NAME "Leapfrog Xeed 2015"
//
// Limit Switches
//
#define X_STOP_PIN 47 // 'X Min'
#define Y_STOP_PIN 48 // 'Y Min'
#define Z_STOP_PIN 49 // 'Z Min'
//
// Steppers
// The Xeed utilizes three Z-axis motors, which use the X, Y, and Z stepper connectors
// on the board. The X and Y steppers use external drivers, attached to signal-level
// Y-axis and X-axis connectors on the board, which map to distinct CPU pins from
// the on-board X/Y stepper drivers.
//
// X-axis signal-level connector
#define X_STEP_PIN 65
#define X_DIR_PIN 64
#define X_ENABLE_PIN 66 // Not actually used on Xeed, could be repurposed
// Y-axis signal-level connector
#define Y_STEP_PIN 23
#define Y_DIR_PIN 22
#define Y_ENABLE_PIN 24 // Not actually used on Xeed, could be repurposed
// ZMOT connector (Front Right Z Motor)
#define Z_STEP_PIN 31
#define Z_DIR_PIN 32
#define Z_ENABLE_PIN 30
// XMOT connector (Rear Z Motor)
#define Z2_STEP_PIN 28
#define Z2_DIR_PIN 63
#define Z2_ENABLE_PIN 29
// YMOT connector (Front Left Z Motor)
#define Z3_STEP_PIN 14
#define Z3_DIR_PIN 15
#define Z3_ENABLE_PIN 39
// EMOT2 connector
#define E0_STEP_PIN 37
#define E0_DIR_PIN 40
#define E0_ENABLE_PIN 36
// EMOT connector
#define E1_STEP_PIN 34
#define E1_DIR_PIN 35
#define E1_ENABLE_PIN 33
//
// Filament runout
//
#define FIL_RUNOUT_PIN 42 // ROT2 Connector
#define FIL_RUNOUT2_PIN 44 // ROT1 Connector
//
// Temperature Sensors
//
#define TEMP_0_PIN 15 // T3 Connector
#define TEMP_1_PIN 13 // T1 Connector
#define TEMP_BED_PIN 14 // BED Connector (Between T1 and T3)
//
// Heaters / Fans
//
#define HEATER_0_PIN 8 // Misc Connector, pins 3 and 4 (Out2)
#define HEATER_1_PIN 9 // Misc Connector, pins 5 and 6 (Out3)
#define HEATER_BED_PIN 6 // Misc Connector, pins 9(-) and 10(+) (OutA)
#define FAN_PIN 10 // Misc Connector, pins 7(-) and 8 (+) (Out4)
#define LED_PIN 13
#define SOL1_PIN 7 // Misc Connector, pins 1(-) and 2(+) (Out1)
// Door Closed Sensor
//#define DOOR_PIN 45 // HM1 Connector

View file

@ -247,6 +247,8 @@
#include "mega/pins_OVERLORD.h" // ATmega2560 env:megaatmega2560 #include "mega/pins_OVERLORD.h" // ATmega2560 env:megaatmega2560
#elif MB(HJC2560C_REV2) #elif MB(HJC2560C_REV2)
#include "mega/pins_HJC2560C_REV2.h" // ATmega2560 env:megaatmega2560 #include "mega/pins_HJC2560C_REV2.h" // ATmega2560 env:megaatmega2560
#elif MB(LEAPFROG_XEED2015)
#include "mega/pins_LEAPFROG_XEED2015.h" // ATmega2560 env:megaatmega2560
// //
// ATmega1281, ATmega2561 // ATmega1281, ATmega2561