Merge pull request #640 from fmalpartida/SAV-MkI

Added support for BT on AT90USB devices, corrected LCD bug, added new board and LCD
This commit is contained in:
ErikZalm 2013-11-10 07:26:08 -08:00
commit 59b96e323e
9 changed files with 155 additions and 18 deletions

View file

@ -23,9 +23,13 @@
// Serial port 0 is still used by the Arduino bootloader regardless of this setting. // Serial port 0 is still used by the Arduino bootloader regardless of this setting.
#define SERIAL_PORT 0 #define SERIAL_PORT 0
// This determines the communication speed of the printer
// This determines the communication speed of the printer // This determines the communication speed of the printer
#define BAUDRATE 250000 #define BAUDRATE 250000
//#define BAUDRATE 115200
// This enables the serial port associated to the Bluetooth interface
//#define BTENABLED // Enable BT interface on AT90USB devices
//// The following define selects which electronics board you have. Please choose the one that matches your setup //// The following define selects which electronics board you have. Please choose the one that matches your setup
// 10 = Gen7 custom (Alfons3 Version) "https://github.com/Alfons3/Generation_7_Electronics" // 10 = Gen7 custom (Alfons3 Version) "https://github.com/Alfons3/Generation_7_Electronics"
@ -54,6 +58,7 @@
// 80 = Rumba // 80 = Rumba
// 81 = Printrboard (AT90USB1286) // 81 = Printrboard (AT90USB1286)
// 82 = Brainwave (AT90USB646) // 82 = Brainwave (AT90USB646)
// 83 = SAV Mk-I (AT90USB1286)
// 9 = Gen3+ // 9 = Gen3+
// 70 = Megatronics // 70 = Megatronics
// 701= Megatronics v2.0 // 701= Megatronics v2.0
@ -64,7 +69,7 @@
// 21 = Elefu Ra Board (v3) // 21 = Elefu Ra Board (v3)
#ifndef MOTHERBOARD #ifndef MOTHERBOARD
#define MOTHERBOARD 7 //#define MOTHERBOARD 7
#endif #endif
// Define this to set a custom name for your generic Mendel, // Define this to set a custom name for your generic Mendel,
@ -514,6 +519,17 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
#define ULTIPANEL #define ULTIPANEL
#endif #endif
// Shift register panels
// ---------------------
// 2 wire Non-latching LCD SR from:
// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
//#define SR_LCD
#ifdef SR_LCD
#define SR_LCD_2W_NL // Non latching 2 wire shiftregister
//#define NEWPANEL
#endif
#ifdef ULTIPANEL #ifdef ULTIPANEL
// #define NEWPANEL //enable this if you have a click-encoder panel // #define NEWPANEL //enable this if you have a click-encoder panel
#define SDSUPPORT #define SDSUPPORT

View file

@ -163,7 +163,7 @@
#ifdef Z_DUAL_STEPPER_DRIVERS && Y_DUAL_STEPPER_DRIVERS #ifdef Z_DUAL_STEPPER_DRIVERS && Y_DUAL_STEPPER_DRIVERS
#error "You cannot have dual drivers for both Y and Z" #error "You cannot have dual drivers for both Y and Z"
#endif #endif
// Enable this for dual x-carriage printers. // Enable this for dual x-carriage printers.
// A dual x-carriage design has the advantage that the inactive extruder can be parked which // A dual x-carriage design has the advantage that the inactive extruder can be parked which

View file

@ -34,6 +34,10 @@
# define analogInputToDigitalPin(p) ((p) + A0) # define analogInputToDigitalPin(p) ((p) + A0)
#endif #endif
#ifdef AT90USB
#include "HardwareSerial.h"
#endif
#include "MarlinSerial.h" #include "MarlinSerial.h"
#ifndef cbi #ifndef cbi
@ -46,9 +50,11 @@
#include "WString.h" #include "WString.h"
#ifdef AT90USB #ifdef AT90USB
#define MYSERIAL Serial #ifdef BTENABLED
#else #define MYSERIAL bt
#define MYSERIAL MSerial #else
#define MYSERIAL Serial
#endif // BTENABLED
#endif #endif
#define SERIAL_PROTOCOL(x) (MYSERIAL.print(x)) #define SERIAL_PROTOCOL(x) (MYSERIAL.print(x))

View file

@ -320,3 +320,9 @@ MarlinSerial MSerial;
#endif // whole file #endif // whole file
#endif // !AT90USB #endif // !AT90USB
// For AT90USB targets use the UART for BT interfacing
#if defined(AT90USB) && defined (BTENABLED)
HardwareSerial bt;
#endif

View file

@ -181,4 +181,9 @@ class MarlinSerial //: public Stream
extern MarlinSerial MSerial; extern MarlinSerial MSerial;
#endif // !AT90USB #endif // !AT90USB
// Use the UART for BT in AT90USB configurations
#if defined(AT90USB) && defined (BTENABLED)
extern HardwareSerial bt;
#endif
#endif #endif

View file

@ -222,10 +222,10 @@ uint8_t const SDA_PIN = 1; // D1
uint8_t const SCL_PIN = 0; // D0 uint8_t const SCL_PIN = 0; // D0
// SPI port // SPI port
uint8_t const SS_PIN = 20; // B0 uint8_t const SS_PIN = 20; // B0
uint8_t const MOSI_PIN = 22; // B2 uint8_t const MOSI_PIN = 22; // B2
uint8_t const MISO_PIN = 23; // B3 uint8_t const MISO_PIN = 23; // B3
uint8_t const SCK_PIN = 21; // B1 uint8_t const SCK_PIN = 21; // B1
static const pin_map_t digitalPinMap[] = { static const pin_map_t digitalPinMap[] = {
{&DDRD, &PIND, &PORTD, 0}, // D0 0 {&DDRD, &PIND, &PORTD, 0}, // D0 0

View file

@ -1549,6 +1549,92 @@
#endif // MOTHERBOARD == 82 (Brainwave) #endif // MOTHERBOARD == 82 (Brainwave)
//
// SAV Mk-I
// -----------------------------------------------------------------------------------
/****************************************************************************************
* SAV MkI pin assignments (AT90USB1286)
* Requires the Teensyduino software with Teensy++ 2.0 selected in Arduino IDE!
http://www.pjrc.com/teensy/teensyduino.html
RepRap Clone Wars project board.
****************************************************************************************/
#if MOTHERBOARD == 83 // SAV Mk-I
#define KNOWN_BOARD 1
#define AT90USB 1286 // Disable MarlinSerial etc.
#ifndef __AVR_AT90USB1286__
#error Oops! Make sure you have 'Teensy++ 2.0' selected from the 'Tools -> Boards' menu.
#endif
#define LARGE_FLASH true
#define X_STEP_PIN 0
#define X_DIR_PIN 1
#define X_ENABLE_PIN 39
#define Y_STEP_PIN 2
#define Y_DIR_PIN 3
#define Y_ENABLE_PIN 38
#define Z_STEP_PIN 4
#define Z_DIR_PIN 5
#define Z_ENABLE_PIN 23
#define E0_STEP_PIN 6
#define E0_DIR_PIN 7
#define E0_ENABLE_PIN 19
#define HEATER_0_PIN 21 // Extruder
#define HEATER_1_PIN -1
#define HEATER_2_PIN -1
#define HEATER_BED_PIN 20 // Bed
#define FAN_PIN 16 // Fan -- from Teensyduino environment.
// For the fan and Teensyduino uses a different pin mapping.
#define X_STOP_PIN 13
#define Y_STOP_PIN 14
#define Z_STOP_PIN 15
#define TEMP_0_PIN 7 // Extruder / Analog pin numbering
#define TEMP_BED_PIN 6 // Bed / Analog pin numbering
#define TEMP_1_PIN -1
#define TEMP_2_PIN -1
#define SDPOWER -1
#define SDSS 20 // PB0 - 8 in marlin env.
#define LED_PIN -1
#define PS_ON_PIN -1
#define KILL_PIN -1
#define ALARM_PIN -1
#define SDCARDDETECT -1
#ifndef SDSUPPORT
// these pins are defined in the SD library if building with SD support
#define SCK_PIN 9
#define MISO_PIN 11
#define MOSI_PIN 10
#endif
#define BEEPER -1
#define LCD_PINS_RS -1
#define LCD_PINS_ENABLE -1
#define LCD_PINS_D4 -1
#define LCD_PINS_D5 -1
#define LCD_PINS_D6 -1
#define LCD_PINS_D7 -1
#define BTN_EN1 -1
#define BTN_EN2 -1
#define BTN_ENC -1
// For LCD SHIFT register LCD
#define SR_DATA_PIN 0
#define SR_CLK_PIN 1
#endif // MOTHERBOARD == 83
/**************************************************************************************** /****************************************************************************************
* Gen3+ pin assignment * Gen3+ pin assignment
* *

View file

@ -19,7 +19,10 @@ int absPreheatHotendTemp;
int absPreheatHPBTemp; int absPreheatHPBTemp;
int absPreheatFanSpeed; int absPreheatFanSpeed;
#ifdef ULTIPANEL
static float manual_feedrate[] = MANUAL_FEEDRATE; static float manual_feedrate[] = MANUAL_FEEDRATE;
#endif // ULTIPANEL
/* !Configuration settings */ /* !Configuration settings */
//Function pointer to menu functions. //Function pointer to menu functions.
@ -992,14 +995,20 @@ void lcd_init()
WRITE(SHIFT_LD,HIGH); WRITE(SHIFT_LD,HIGH);
#endif #endif
#else #else
pinMode(SHIFT_CLK,OUTPUT); #ifdef SR_LCD_2W_NL
pinMode(SHIFT_LD,OUTPUT); pinMode (SR_DATA_PIN, OUTPUT);
pinMode(SHIFT_EN,OUTPUT); pinMode (SR_CLK_PIN, OUTPUT);
pinMode(SHIFT_OUT,INPUT); #else
WRITE(SHIFT_OUT,HIGH); pinMode(SHIFT_CLK,OUTPUT);
WRITE(SHIFT_LD,HIGH); pinMode(SHIFT_LD,OUTPUT);
WRITE(SHIFT_EN,LOW); pinMode(SHIFT_EN,OUTPUT);
pinMode(SHIFT_OUT,INPUT);
WRITE(SHIFT_OUT,HIGH);
WRITE(SHIFT_LD,HIGH);
WRITE(SHIFT_EN,LOW);
#endif // SR_LCD_2W_NL
#endif//!NEWPANEL #endif//!NEWPANEL
#if (SDCARDDETECT > 0) #if (SDCARDDETECT > 0)
WRITE(SDCARDDETECT, HIGH); WRITE(SDCARDDETECT, HIGH);
lcd_oldcardstatus = IS_SD_INSERTED; lcd_oldcardstatus = IS_SD_INSERTED;

View file

@ -178,7 +178,16 @@ extern volatile uint16_t buttons; //an extended version of the last checked but
#include <LiquidCrystal_I2C.h> #include <LiquidCrystal_I2C.h>
#define LCD_CLASS LiquidCrystal_I2C #define LCD_CLASS LiquidCrystal_I2C
LCD_CLASS lcd(LCD_I2C_ADDRESS, LCD_WIDTH, LCD_HEIGHT); LCD_CLASS lcd(LCD_I2C_ADDRESS, LCD_WIDTH, LCD_HEIGHT);
// 2 wire Non-latching LCD SR from:
// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
#elif defined(SR_LCD_2W_NL)
#include <LCD.h>
#include <LiquidCrystal_SR.h>
#define LCD_CLASS LiquidCrystal_SR
LCD_CLASS lcd(SR_DATA_PIN, SR_CLK_PIN);
#else #else
// Standard directly connected LCD implementations // Standard directly connected LCD implementations
#if LANGUAGE_CHOICE == 6 #if LANGUAGE_CHOICE == 6