Hephestos2 heated bed kit for all (#9757)

Marlin/Configuration_adv.h

@@ -40,6 +40,17 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+  #undef TEMP_SENSOR_BED
+  #define TEMP_SENSOR_BED 70
+  #define HEATER_BED_INVERTING true
+#endif
+
 #if DISABLED(PIDTEMPBED)
   #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
   #if ENABLED(BED_LIMIT_SWITCHING)

Marlin/src/config/default/Configuration_adv.h

@@ -40,6 +40,17 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+  #undef TEMP_SENSOR_BED
+  #define TEMP_SENSOR_BED 70
+  #define HEATER_BED_INVERTING true
+#endif
+
 #if DISABLED(PIDTEMPBED)
   #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
   #if ENABLED(BED_LIMIT_SWITCHING)

Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h

@@ -40,6 +40,17 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+  #undef TEMP_SENSOR_BED
+  #define TEMP_SENSOR_BED 70
+  #define HEATER_BED_INVERTING true
+#endif
+
 #if DISABLED(PIDTEMPBED)
   #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
   #if ENABLED(BED_LIMIT_SWITCHING)

Marlin/src/config/examples/Anet/A6/Configuration_adv.h

@@ -40,6 +40,17 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+  #undef TEMP_SENSOR_BED
+  #define TEMP_SENSOR_BED 70
+  #define HEATER_BED_INVERTING true
+#endif
+
 #if DISABLED(PIDTEMPBED)
   #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
   #if ENABLED(BED_LIMIT_SWITCHING)

Marlin/src/config/examples/Anet/A8/Configuration_adv.h

@@ -40,6 +40,17 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+  #undef TEMP_SENSOR_BED
+  #define TEMP_SENSOR_BED 70
+  #define HEATER_BED_INVERTING true
+#endif
+
 #if DISABLED(PIDTEMPBED)
   #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
   #if ENABLED(BED_LIMIT_SWITCHING)

Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h

@@ -40,6 +40,17 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+  #undef TEMP_SENSOR_BED
+  #define TEMP_SENSOR_BED 70
+  #define HEATER_BED_INVERTING true
+#endif
+
 #if DISABLED(PIDTEMPBED)
   #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
   #if ENABLED(BED_LIMIT_SWITCHING)

Marlin/src/config/examples/BIBO/TouchX/Configuration_adv.h

@@ -40,6 +40,17 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+  #undef TEMP_SENSOR_BED
+  #define TEMP_SENSOR_BED 70
+  #define HEATER_BED_INVERTING true
+#endif
+
 #if DISABLED(PIDTEMPBED)
   #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
   #if ENABLED(BED_LIMIT_SWITCHING)

Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h

@@ -40,6 +40,17 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+  #undef TEMP_SENSOR_BED
+  #define TEMP_SENSOR_BED 70
+  #define HEATER_BED_INVERTING true
+#endif
+
 #if DISABLED(PIDTEMPBED)
   #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
   #if ENABLED(BED_LIMIT_SWITCHING)

Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h

@@ -25,7 +25,7 @@
 #define CONFIGURATION_H_VERSION 020000
 
 //===========================================================================
-//================================= README ==================================
+//============================= Getting Started =============================
 //===========================================================================
 
 /**
@@ -34,15 +34,9 @@
  * This configuration supports the standard Hephestos 2 with or without the
  * heated bed kit featured at https://store.bq.com/en/heated-bed-kit-hephestos2
  *
- * Enable the following option to activate all functionality related to the heated bed.
+ * Enable HEPHESTOS2_HEATED_BED_KIT in Configuration_adv.h for all functionality
- */
+ * related to the heated bed.
-//#define HEPHESTOS2_HEATED_BED_KIT
+ *
-
-//===========================================================================
-//============================= Getting Started =============================
-//===========================================================================
-
-/**
  * Here are some standard links for getting your machine calibrated:
  *
  * http://reprap.org/wiki/Calibration
@@ -313,13 +307,7 @@
 #define TEMP_SENSOR_2 0
 #define TEMP_SENSOR_3 0
 #define TEMP_SENSOR_4 0
-
+#define TEMP_SENSOR_BED 0
-#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
-  #define TEMP_SENSOR_BED 70
-  #define HEATER_BED_INVERTING true
-#else
-  #define TEMP_SENSOR_BED 0
-#endif
 
 // Dummy thermistor constant temperature readings, for use with 998 and 999
 #define DUMMY_THERMISTOR_998_VALUE 25
@@ -412,10 +400,7 @@
 // all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis)
 // setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did,
 // so you shouldn't use it unless you are OK with PWM on your bed.  (see the comment on enabling PIDTEMPBED)
-
+#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
-#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
-  #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
-#endif
 
 #if ENABLED(PIDTEMPBED)
 

Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h

@@ -40,6 +40,17 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+  #undef TEMP_SENSOR_BED
+  #define TEMP_SENSOR_BED 70
+  #define HEATER_BED_INVERTING true
+#endif
+
 #if DISABLED(PIDTEMPBED)
   #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
   #if ENABLED(BED_LIMIT_SWITCHING)

Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h

@@ -40,6 +40,17 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+  #undef TEMP_SENSOR_BED
+  #define TEMP_SENSOR_BED 70
+  #define HEATER_BED_INVERTING true
+#endif
+
 #if DISABLED(PIDTEMPBED)
   #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
   #if ENABLED(BED_LIMIT_SWITCHING)

Marlin/src/config/examples/Cartesio/Configuration_adv.h

@@ -40,6 +40,17 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+  #undef TEMP_SENSOR_BED
+  #define TEMP_SENSOR_BED 70
+  #define HEATER_BED_INVERTING true
+#endif
+
 #if DISABLED(PIDTEMPBED)
   #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
   #if ENABLED(BED_LIMIT_SWITCHING)

Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h

@@ -40,6 +40,17 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+  #undef TEMP_SENSOR_BED
+  #define TEMP_SENSOR_BED 70
+  #define HEATER_BED_INVERTING true
+#endif
+
 #if DISABLED(PIDTEMPBED)
   #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
   #if ENABLED(BED_LIMIT_SWITCHING)

Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h

@@ -40,6 +40,17 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+  #undef TEMP_SENSOR_BED
+  #define TEMP_SENSOR_BED 70
+  #define HEATER_BED_INVERTING true
+#endif
+
 #if DISABLED(PIDTEMPBED)
   #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
   #if ENABLED(BED_LIMIT_SWITCHING)

Marlin/src/config/examples/Creality/Ender/Configuration_adv.h

@@ -40,6 +40,17 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+  #undef TEMP_SENSOR_BED
+  #define TEMP_SENSOR_BED 70
+  #define HEATER_BED_INVERTING true
+#endif
+
 #if DISABLED(PIDTEMPBED)
   #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
   #if ENABLED(BED_LIMIT_SWITCHING)

Marlin/src/config/examples/Felix/Configuration_adv.h

@@ -40,6 +40,17 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+  #undef TEMP_SENSOR_BED
+  #define TEMP_SENSOR_BED 70
+  #define HEATER_BED_INVERTING true
+#endif
+
 #if DISABLED(PIDTEMPBED)
   #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
   #if ENABLED(BED_LIMIT_SWITCHING)

Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h

@@ -40,6 +40,17 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+  #undef TEMP_SENSOR_BED
+  #define TEMP_SENSOR_BED 70
+  #define HEATER_BED_INVERTING true
+#endif
+
 #if DISABLED(PIDTEMPBED)
   #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
   #if ENABLED(BED_LIMIT_SWITCHING)

Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h

@@ -40,6 +40,17 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+  #undef TEMP_SENSOR_BED
+  #define TEMP_SENSOR_BED 70
+  #define HEATER_BED_INVERTING true
+#endif
+
 #if DISABLED(PIDTEMPBED)
   #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
   #if ENABLED(BED_LIMIT_SWITCHING)

Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h

@@ -40,6 +40,17 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+  #undef TEMP_SENSOR_BED
+  #define TEMP_SENSOR_BED 70
+  #define HEATER_BED_INVERTING true
+#endif
+
 #if DISABLED(PIDTEMPBED)
   #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
   #if ENABLED(BED_LIMIT_SWITCHING)

Marlin/src/config/examples/MakerParts/Configuration_adv.h

@@ -40,6 +40,17 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+  #undef TEMP_SENSOR_BED
+  #define TEMP_SENSOR_BED 70
+  #define HEATER_BED_INVERTING true
+#endif
+
 #if DISABLED(PIDTEMPBED)
   #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
   #if ENABLED(BED_LIMIT_SWITCHING)

Marlin/src/config/examples/Malyan/M150/Configuration_adv.h

@@ -40,6 +40,17 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+  #undef TEMP_SENSOR_BED
+  #define TEMP_SENSOR_BED 70
+  #define HEATER_BED_INVERTING true
+#endif
+
 #if DISABLED(PIDTEMPBED)
   #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
   #if ENABLED(BED_LIMIT_SWITCHING)

Marlin/src/config/examples/Malyan/M200/Configuration_adv.h

@@ -40,6 +40,17 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+  #undef TEMP_SENSOR_BED
+  #define TEMP_SENSOR_BED 70
+  #define HEATER_BED_INVERTING true
+#endif
+
 #if DISABLED(PIDTEMPBED)
   #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
   #if ENABLED(BED_LIMIT_SWITCHING)

Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h

@@ -40,6 +40,17 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+  #undef TEMP_SENSOR_BED
+  #define TEMP_SENSOR_BED 70
+  #define HEATER_BED_INVERTING true
+#endif
+
 #if DISABLED(PIDTEMPBED)
   #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
   #if ENABLED(BED_LIMIT_SWITCHING)

Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h

@@ -40,6 +40,17 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+  #undef TEMP_SENSOR_BED
+  #define TEMP_SENSOR_BED 70
+  #define HEATER_BED_INVERTING true
+#endif
+
 #if DISABLED(PIDTEMPBED)
   #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
   #if ENABLED(BED_LIMIT_SWITCHING)

Marlin/src/config/examples/RigidBot/Configuration_adv.h

@@ -40,6 +40,17 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+  #undef TEMP_SENSOR_BED
+  #define TEMP_SENSOR_BED 70
+  #define HEATER_BED_INVERTING true
+#endif
+
 #if DISABLED(PIDTEMPBED)
   #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
   #if ENABLED(BED_LIMIT_SWITCHING)

Marlin/src/config/examples/SCARA/Configuration_adv.h

@@ -40,6 +40,17 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+  #undef TEMP_SENSOR_BED
+  #define TEMP_SENSOR_BED 70
+  #define HEATER_BED_INVERTING true
+#endif
+
 #if DISABLED(PIDTEMPBED)
   #define BED_CHECK_INTERVAL 3000 // ms between checks in bang-bang control
   #if ENABLED(BED_LIMIT_SWITCHING)

Marlin/src/config/examples/Sanguinololu/Configuration_adv.h

@@ -40,6 +40,17 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+  #undef TEMP_SENSOR_BED
+  #define TEMP_SENSOR_BED 70
+  #define HEATER_BED_INVERTING true
+#endif
+
 #if DISABLED(PIDTEMPBED)
   #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
   #if ENABLED(BED_LIMIT_SWITCHING)

Marlin/src/config/examples/TheBorg/Configuration_adv.h

@@ -40,6 +40,17 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+  #undef TEMP_SENSOR_BED
+  #define TEMP_SENSOR_BED 70
+  #define HEATER_BED_INVERTING true
+#endif
+
 #if DISABLED(PIDTEMPBED)
   #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
   #if ENABLED(BED_LIMIT_SWITCHING)

Marlin/src/config/examples/TinyBoy2/Configuration_adv.h

@@ -40,6 +40,17 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+  #undef TEMP_SENSOR_BED
+  #define TEMP_SENSOR_BED 70
+  #define HEATER_BED_INVERTING true
+#endif
+
 #if DISABLED(PIDTEMPBED)
   #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
   #if ENABLED(BED_LIMIT_SWITCHING)

Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h

@@ -40,6 +40,17 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+  #undef TEMP_SENSOR_BED
+  #define TEMP_SENSOR_BED 70
+  #define HEATER_BED_INVERTING true
+#endif
+
 #if DISABLED(PIDTEMPBED)
   #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
   #if ENABLED(BED_LIMIT_SWITCHING)

Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h

@@ -49,6 +49,17 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+  #undef TEMP_SENSOR_BED
+  #define TEMP_SENSOR_BED 70
+  #define HEATER_BED_INVERTING true
+#endif
+
 #if DISABLED(PIDTEMPBED)
   #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
   #if ENABLED(BED_LIMIT_SWITCHING)

Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h

@@ -40,6 +40,17 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+  #undef TEMP_SENSOR_BED
+  #define TEMP_SENSOR_BED 70
+  #define HEATER_BED_INVERTING true
+#endif
+
 #if DISABLED(PIDTEMPBED)
   #define BED_CHECK_INTERVAL 1000 // ms between checks in bang-bang control
   #if ENABLED(BED_LIMIT_SWITCHING)

Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h

@@ -40,6 +40,17 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+  #undef TEMP_SENSOR_BED
+  #define TEMP_SENSOR_BED 70
+  #define HEATER_BED_INVERTING true
+#endif
+
 #if DISABLED(PIDTEMPBED)
   #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
   #if ENABLED(BED_LIMIT_SWITCHING)

Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h

@@ -40,6 +40,17 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+  #undef TEMP_SENSOR_BED
+  #define TEMP_SENSOR_BED 70
+  #define HEATER_BED_INVERTING true
+#endif
+
 #if DISABLED(PIDTEMPBED)
   #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
   #if ENABLED(BED_LIMIT_SWITCHING)

Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h

@@ -40,6 +40,17 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+  #undef TEMP_SENSOR_BED
+  #define TEMP_SENSOR_BED 70
+  #define HEATER_BED_INVERTING true
+#endif
+
 #if DISABLED(PIDTEMPBED)
   #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
   #if ENABLED(BED_LIMIT_SWITCHING)

Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h

@@ -40,6 +40,17 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+  #undef TEMP_SENSOR_BED
+  #define TEMP_SENSOR_BED 70
+  #define HEATER_BED_INVERTING true
+#endif
+
 #if DISABLED(PIDTEMPBED)
   #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
   #if ENABLED(BED_LIMIT_SWITCHING)

Marlin/src/config/examples/delta/generic/Configuration_adv.h

@@ -40,6 +40,17 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+  #undef TEMP_SENSOR_BED
+  #define TEMP_SENSOR_BED 70
+  #define HEATER_BED_INVERTING true
+#endif
+
 #if DISABLED(PIDTEMPBED)
   #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
   #if ENABLED(BED_LIMIT_SWITCHING)

Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h

@@ -40,6 +40,17 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+  #undef TEMP_SENSOR_BED
+  #define TEMP_SENSOR_BED 70
+  #define HEATER_BED_INVERTING true
+#endif
+
 #if DISABLED(PIDTEMPBED)
   #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
   #if ENABLED(BED_LIMIT_SWITCHING)

Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h

@@ -45,6 +45,17 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+  #undef TEMP_SENSOR_BED
+  #define TEMP_SENSOR_BED 70
+  #define HEATER_BED_INVERTING true
+#endif
+
 #if DISABLED(PIDTEMPBED)
   #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
   #if ENABLED(BED_LIMIT_SWITCHING)

Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h

@@ -40,6 +40,17 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+  #undef TEMP_SENSOR_BED
+  #define TEMP_SENSOR_BED 70
+  #define HEATER_BED_INVERTING true
+#endif
+
 #if DISABLED(PIDTEMPBED)
   #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
   #if ENABLED(BED_LIMIT_SWITCHING)

Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h

@@ -40,6 +40,17 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+  #undef TEMP_SENSOR_BED
+  #define TEMP_SENSOR_BED 70
+  #define HEATER_BED_INVERTING true
+#endif
+
 #if DISABLED(PIDTEMPBED)
   #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
   #if ENABLED(BED_LIMIT_SWITCHING)

Marlin/src/config/examples/makibox/Configuration_adv.h

@@ -40,6 +40,17 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+  #undef TEMP_SENSOR_BED
+  #define TEMP_SENSOR_BED 70
+  #define HEATER_BED_INVERTING true
+#endif
+
 #if DISABLED(PIDTEMPBED)
   #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
   #if ENABLED(BED_LIMIT_SWITCHING)

Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h

@@ -40,6 +40,17 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+  #undef TEMP_SENSOR_BED
+  #define TEMP_SENSOR_BED 70
+  #define HEATER_BED_INVERTING true
+#endif
+
 #if DISABLED(PIDTEMPBED)
   #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
   #if ENABLED(BED_LIMIT_SWITCHING)

Marlin/src/config/examples/wt150/Configuration_adv.h

@@ -40,6 +40,17 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+  #undef TEMP_SENSOR_BED
+  #define TEMP_SENSOR_BED 70
+  #define HEATER_BED_INVERTING true
+#endif
+
 #if DISABLED(PIDTEMPBED)
   #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
   #if ENABLED(BED_LIMIT_SWITCHING)