SunRed/Marlin-Artillery-M600
Archived
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity

Bring configurations up to date, fix some comments

Browse source
This commit is contained in:
Scott Lahteine 2017-06-28 13:44:04 -05:00
parent e3cedfa0ec
commit 5b03f23fa2
32 changed files with 182 additions and 161 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

18
Marlin/Configuration.h
View file

@ -988,7 +988,7 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
//define this to enable EEPROM support // Define this to enable EEPROM support
//#define EEPROM_SETTINGS //#define EEPROM_SETTINGS
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
@ -1392,6 +1392,16 @@
// //
//#define BQ_LCD_SMART_CONTROLLER //#define BQ_LCD_SMART_CONTROLLER
//
// ANET_10 Controller supported displays.
//
//#define ANET_KEYPAD_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin.
// This LCD is known to be susceptible to electrical interference
// which scrambles the display. Pressing any button clears it up.
//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6
// A clone of the RepRapDiscount full graphics display but with
// different pins/wiring (see pins_ANET_10.h).
// //
// CONTROLLER TYPE: I2C // CONTROLLER TYPE: I2C
// //
@ -1501,13 +1511,13 @@
// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
//#define SF_ARC_FIX //#define SF_ARC_FIX
// Support for the BariCUDA Paste Extruder. // Support for the BariCUDA Paste Extruder
//#define BARICUDA //#define BARICUDA
//define BlinkM/CyzRgb Support // Support for BlinkM/CyzRgb
//#define BLINKM //#define BLINKM
//define PCA9632 PWM LED driver Support // Support for PCA9632 PWM LED driver
//#define PCA9632 //#define PCA9632
/** /**

4
Marlin/Configuration_adv.h
View file

@ -123,8 +123,8 @@
#define AUTOTEMP_OLDWEIGHT 0.98 #define AUTOTEMP_OLDWEIGHT 0.98
#endif #endif
//Show Temperature ADC value // Show Temperature ADC value
//The M105 command return, besides traditional information, the ADC value read from temperature sensors. // Enable for M105 to include ADC values read from temperature sensors.
//#define SHOW_TEMP_ADC_VALUES //#define SHOW_TEMP_ADC_VALUES
/** /**

54
Marlin/example_configurations/Anet/Configuration.h
View file

@ -58,15 +58,15 @@
//=========================================================================== //===========================================================================
//============================= DELTA Printer =============================== //============================= DELTA Printer ===============================
//=========================================================================== //===========================================================================
// For a Delta printer replace the configuration files with the files in the // For a Delta printer start with one of the configuration files in the
// example_configurations/delta directory. // example_configurations/delta directory and customize for your machine.
// //
//=========================================================================== //===========================================================================
//============================= SCARA Printer =============================== //============================= SCARA Printer ===============================
//=========================================================================== //===========================================================================
// For a Scara printer replace the configuration files with the files in the // For a SCARA printer start with the configuration files in
// example_configurations/SCARA directory. // example_configurations/SCARA and customize for your machine.
// //
// @section info // @section info
@ -161,7 +161,10 @@
//#define SWITCHING_EXTRUDER //#define SWITCHING_EXTRUDER
#if ENABLED(SWITCHING_EXTRUDER) #if ENABLED(SWITCHING_EXTRUDER)
#define SWITCHING_EXTRUDER_SERVO_NR 0 #define SWITCHING_EXTRUDER_SERVO_NR 0
#define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3]
#if EXTRUDERS > 3
#define SWITCHING_EXTRUDER_E23_SERVO_NR 1
#endif
#endif #endif
// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles // A dual-nozzle that uses a servomotor to raise/lower one of the nozzles
@ -512,14 +515,14 @@
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT {100, 100, 400, 95} #define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 400, 95 }
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_FEEDRATE {400, 400, 8, 50} #define DEFAULT_MAX_FEEDRATE { 400, 400, 8, 50 }
/** /**
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
@ -527,7 +530,7 @@
* Override with M201 * Override with M201
* X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_ACCELERATION {2000, 2000, 100, 10000} #define DEFAULT_MAX_ACCELERATION { 2000, 2000, 100, 10000 }
/** /**
* Default Acceleration (change/s) change = mm/s * Default Acceleration (change/s) change = mm/s
@ -596,7 +599,7 @@
* Probe Type * Probe Type
* *
* Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc.
* Activate one of these to use Auto Bed Leveling below. * You must activate one of these to use Auto Bed Leveling below.
*/ */
/** /**
@ -991,7 +994,7 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
//define this to enable EEPROM support // Define this to enable EEPROM support
#define EEPROM_SETTINGS #define EEPROM_SETTINGS
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
@ -1307,6 +1310,12 @@
// //
//#define ULTIPANEL //#define ULTIPANEL
//
// Cartesio UI
// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
//
//#define CARTESIO_UI
// //
// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) // PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
// http://reprap.org/wiki/PanelOne // http://reprap.org/wiki/PanelOne
@ -1391,12 +1400,6 @@
// //
//#define BQ_LCD_SMART_CONTROLLER //#define BQ_LCD_SMART_CONTROLLER
//
// Cartesio UI
// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
//
//#define CARTESIO_UI
// //
// ANET_10 Controller supported displays. // ANET_10 Controller supported displays.
// //
@ -1423,6 +1426,9 @@
// //
// Sainsmart YW Robot (LCM1602) LCD Display // Sainsmart YW Robot (LCM1602) LCD Display
// //
// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library
// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home
//
//#define LCD_I2C_SAINSMART_YWROBOT //#define LCD_I2C_SAINSMART_YWROBOT
// //
@ -1453,11 +1459,6 @@
// //
//#define U8GLIB_SSD1306 //#define U8GLIB_SSD1306
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
// //
// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
// //
@ -1475,6 +1476,11 @@
// //
//#define SAV_3DLCD //#define SAV_3DLCD
//
// TinyBoy2 128x64 OLED / Encoder Panel
//
//#define OLED_PANEL_TINYBOY2
//============================================================================= //=============================================================================
//=============================== Extra Features ============================== //=============================== Extra Features ==============================
//============================================================================= //=============================================================================
@ -1513,13 +1519,13 @@
// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
//#define SF_ARC_FIX //#define SF_ARC_FIX
// Support for the BariCUDA Paste Extruder. // Support for the BariCUDA Paste Extruder
//#define BARICUDA //#define BARICUDA
//define BlinkM/CyzRgb Support // Support for BlinkM/CyzRgb
//#define BLINKM //#define BLINKM
//define PCA9632 PWM LED driver Support // Support for PCA9632 PWM LED driver
//#define PCA9632 //#define PCA9632
/** /**

43
Marlin/example_configurations/Anet/Configuration_adv.h
View file

@ -225,13 +225,11 @@
*/ */
//#define CASE_LIGHT_ENABLE //#define CASE_LIGHT_ENABLE
#if ENABLED(CASE_LIGHT_ENABLE) #if ENABLED(CASE_LIGHT_ENABLE)
#define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board //#define CASE_LIGHT_PIN 4 // Override the default pin if needed
// pins_XXX.h file overrides this one #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
#define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0 #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
#define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
// and if CASE_LIGHT_DEFAULT is set to on
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
#endif #endif
//=========================================================================== //===========================================================================
@ -421,16 +419,16 @@
* M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H
* M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2
*/ */
//#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps //#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps
//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) //#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis //#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
// Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro // Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
//#define DIGIPOT_I2C //#define DIGIPOT_I2C
//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster //#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS // Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO #define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO
//=========================================================================== //===========================================================================
//=============================Additional Features=========================== //=============================Additional Features===========================
@ -680,10 +678,16 @@
// @section extras // @section extras
// Arc interpretation settings: //
//#define ARC_SUPPORT // Disabling this saves ~2738 bytes // G2/G3 Arc Support
#define MM_PER_ARC_SEGMENT 1 //
#define N_ARC_CORRECTION 25 //#define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment
#define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections
//#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
//#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
#endif
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
@ -809,6 +813,7 @@
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable to have stepper motors hold position during filament change #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable to have stepper motors hold position during filament change
// even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME. // even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME.
//#define PARK_HEAD_ON_PAUSE // Go to filament change position on pause, return to print position on resume //#define PARK_HEAD_ON_PAUSE // Go to filament change position on pause, return to print position on resume
//#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
#endif #endif
// @section tmc // @section tmc
@ -1201,12 +1206,12 @@
/** /**
* Auto-report temperatures with M155 S<seconds> * Auto-report temperatures with M155 S<seconds>
*/ */
//#define AUTO_REPORT_TEMPERATURES #define AUTO_REPORT_TEMPERATURES
/** /**
* Include capabilities in M115 output * Include capabilities in M115 output
*/ */
//#define EXTENDED_CAPABILITIES_REPORT #define EXTENDED_CAPABILITIES_REPORT
/** /**
* Volumetric extrusion default state * Volumetric extrusion default state
@ -1264,7 +1269,7 @@
#endif #endif
//=========================================================================== //===========================================================================
//============================ I2C Encoder Settings ========================= //====================== I2C Position Encoder Settings ======================
//=========================================================================== //===========================================================================
/** /**
* I2C position encoders for closed loop control. * I2C position encoders for closed loop control.
@ -1344,6 +1349,6 @@
// Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise.
#define I2CPE_ERR_ROLLING_AVERAGE #define I2CPE_ERR_ROLLING_AVERAGE
#endif #endif // I2C_POSITION_ENCODERS
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

8
Marlin/example_configurations/CL-260/Configuration.h
View file

@ -985,7 +985,7 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
//define this to enable EEPROM support // Define this to enable EEPROM support
//#define EEPROM_SETTINGS //#define EEPROM_SETTINGS
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
@ -1508,13 +1508,13 @@
// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
//#define SF_ARC_FIX //#define SF_ARC_FIX
// Support for the BariCUDA Paste Extruder. // Support for the BariCUDA Paste Extruder
//#define BARICUDA //#define BARICUDA
//define BlinkM/CyzRgb Support // Support for BlinkM/CyzRgb
//#define BLINKM //#define BLINKM
//define PCA9632 PWM LED driver Support // Support for PCA9632 PWM LED driver
//#define PCA9632 //#define PCA9632
/** /**

8
Marlin/example_configurations/Cartesio/Configuration.h
View file

@ -982,7 +982,7 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
//define this to enable EEPROM support // Define this to enable EEPROM support
//#define EEPROM_SETTINGS //#define EEPROM_SETTINGS
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
@ -1505,13 +1505,13 @@
// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
//#define SF_ARC_FIX //#define SF_ARC_FIX
// Support for the BariCUDA Paste Extruder. // Support for the BariCUDA Paste Extruder
//#define BARICUDA //#define BARICUDA
//define BlinkM/CyzRgb Support // Support for BlinkM/CyzRgb
//#define BLINKM //#define BLINKM
//define PCA9632 PWM LED driver Support // Support for PCA9632 PWM LED driver
//#define PCA9632 //#define PCA9632
/** /**

8
Marlin/example_configurations/Felix/Configuration.h
View file

@ -966,7 +966,7 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
//define this to enable EEPROM support // Define this to enable EEPROM support
//#define EEPROM_SETTINGS //#define EEPROM_SETTINGS
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
@ -1489,13 +1489,13 @@
// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
//#define SF_ARC_FIX //#define SF_ARC_FIX
// Support for the BariCUDA Paste Extruder. // Support for the BariCUDA Paste Extruder
//#define BARICUDA //#define BARICUDA
//define BlinkM/CyzRgb Support // Support for BlinkM/CyzRgb
//#define BLINKM //#define BLINKM
//define PCA9632 PWM LED driver Support // Support for PCA9632 PWM LED driver
//#define PCA9632 //#define PCA9632
/** /**

8
Marlin/example_configurations/Felix/DUAL/Configuration.h
View file

@ -966,7 +966,7 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
//define this to enable EEPROM support // Define this to enable EEPROM support
//#define EEPROM_SETTINGS //#define EEPROM_SETTINGS
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
@ -1489,13 +1489,13 @@
// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
//#define SF_ARC_FIX //#define SF_ARC_FIX
// Support for the BariCUDA Paste Extruder. // Support for the BariCUDA Paste Extruder
//#define BARICUDA //#define BARICUDA
//define BlinkM/CyzRgb Support // Support for BlinkM/CyzRgb
//#define BLINKM //#define BLINKM
//define PCA9632 PWM LED driver Support // Support for PCA9632 PWM LED driver
//#define PCA9632 //#define PCA9632
/** /**

8
Marlin/example_configurations/FolgerTech-i3-2020/Configuration.h
View file

@ -988,7 +988,7 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
//define this to enable EEPROM support // Define this to enable EEPROM support
#define EEPROM_SETTINGS #define EEPROM_SETTINGS
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
@ -1511,13 +1511,13 @@
// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
//#define SF_ARC_FIX //#define SF_ARC_FIX
// Support for the BariCUDA Paste Extruder. // Support for the BariCUDA Paste Extruder
//#define BARICUDA //#define BARICUDA
//define BlinkM/CyzRgb Support // Support for BlinkM/CyzRgb
//#define BLINKM //#define BLINKM
//define PCA9632 PWM LED driver Support // Support for PCA9632 PWM LED driver
//#define PCA9632 //#define PCA9632
/** /**

8
Marlin/example_configurations/Hephestos/Configuration.h
View file

@ -974,7 +974,7 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
//define this to enable EEPROM support // Define this to enable EEPROM support
//#define EEPROM_SETTINGS //#define EEPROM_SETTINGS
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
@ -1497,13 +1497,13 @@
// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
//#define SF_ARC_FIX //#define SF_ARC_FIX
// Support for the BariCUDA Paste Extruder. // Support for the BariCUDA Paste Extruder
//#define BARICUDA //#define BARICUDA
//define BlinkM/CyzRgb Support // Support for BlinkM/CyzRgb
//#define BLINKM //#define BLINKM
//define PCA9632 PWM LED driver Support // Support for PCA9632 PWM LED driver
//#define PCA9632 //#define PCA9632
/** /**

8
Marlin/example_configurations/Hephestos_2/Configuration.h
View file

@ -977,7 +977,7 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
//define this to enable EEPROM support // Define this to enable EEPROM support
#define EEPROM_SETTINGS #define EEPROM_SETTINGS
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
@ -1500,13 +1500,13 @@
// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
//#define SF_ARC_FIX //#define SF_ARC_FIX
// Support for the BariCUDA Paste Extruder. // Support for the BariCUDA Paste Extruder
//#define BARICUDA //#define BARICUDA
//define BlinkM/CyzRgb Support // Support for BlinkM/CyzRgb
//#define BLINKM //#define BLINKM
//define PCA9632 PWM LED driver Support // Support for PCA9632 PWM LED driver
//#define PCA9632 //#define PCA9632
/** /**

8
Marlin/example_configurations/K8200/Configuration.h
View file

@ -1013,7 +1013,7 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
//define this to enable EEPROM support // Define this to enable EEPROM support
#define EEPROM_SETTINGS // K8200: uses EEPROM by default #define EEPROM_SETTINGS // K8200: uses EEPROM by default
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
@ -1546,13 +1546,13 @@
// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
//#define SF_ARC_FIX //#define SF_ARC_FIX
// Support for the BariCUDA Paste Extruder. // Support for the BariCUDA Paste Extruder
//#define BARICUDA //#define BARICUDA
//define BlinkM/CyzRgb Support // Support for BlinkM/CyzRgb
//#define BLINKM //#define BLINKM
//define PCA9632 PWM LED driver Support // Support for PCA9632 PWM LED driver
//#define PCA9632 //#define PCA9632
/** /**

8
Marlin/example_configurations/K8400/Configuration.h
View file

@ -984,7 +984,7 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
//define this to enable EEPROM support // Define this to enable EEPROM support
#define EEPROM_SETTINGS #define EEPROM_SETTINGS
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
@ -1507,13 +1507,13 @@
// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
//#define SF_ARC_FIX //#define SF_ARC_FIX
// Support for the BariCUDA Paste Extruder. // Support for the BariCUDA Paste Extruder
//#define BARICUDA //#define BARICUDA
//define BlinkM/CyzRgb Support // Support for BlinkM/CyzRgb
//#define BLINKM //#define BLINKM
//define PCA9632 PWM LED driver Support // Support for PCA9632 PWM LED driver
//#define PCA9632 //#define PCA9632
/** /**

8
Marlin/example_configurations/K8400/Dual-head/Configuration.h
View file

@ -984,7 +984,7 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
//define this to enable EEPROM support // Define this to enable EEPROM support
#define EEPROM_SETTINGS #define EEPROM_SETTINGS
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
@ -1507,13 +1507,13 @@
// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
//#define SF_ARC_FIX //#define SF_ARC_FIX
// Support for the BariCUDA Paste Extruder. // Support for the BariCUDA Paste Extruder
//#define BARICUDA //#define BARICUDA
//define BlinkM/CyzRgb Support // Support for BlinkM/CyzRgb
//#define BLINKM //#define BLINKM
//define PCA9632 PWM LED driver Support // Support for PCA9632 PWM LED driver
//#define PCA9632 //#define PCA9632
/** /**

8
Marlin/example_configurations/M150/Configuration.h
View file

@ -1011,7 +1011,7 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
//define this to enable EEPROM support // Define this to enable EEPROM support
#define EEPROM_SETTINGS #define EEPROM_SETTINGS
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
@ -1534,13 +1534,13 @@
// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
//#define SF_ARC_FIX //#define SF_ARC_FIX
// Support for the BariCUDA Paste Extruder. // Support for the BariCUDA Paste Extruder
//#define BARICUDA //#define BARICUDA
//define BlinkM/CyzRgb Support // Support for BlinkM/CyzRgb
//#define BLINKM //#define BLINKM
//define PCA9632 PWM LED driver Support // Support for PCA9632 PWM LED driver
//#define PCA9632 //#define PCA9632
/** /**

8
Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
View file

@ -984,7 +984,7 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
//define this to enable EEPROM support // Define this to enable EEPROM support
//#define EEPROM_SETTINGS //#define EEPROM_SETTINGS
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
@ -1507,13 +1507,13 @@
// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
//#define SF_ARC_FIX //#define SF_ARC_FIX
// Support for the BariCUDA Paste Extruder. // Support for the BariCUDA Paste Extruder
//#define BARICUDA //#define BARICUDA
//define BlinkM/CyzRgb Support // Support for BlinkM/CyzRgb
//#define BLINKM //#define BLINKM
//define PCA9632 PWM LED driver Support // Support for PCA9632 PWM LED driver
//#define PCA9632 //#define PCA9632
/** /**

8
Marlin/example_configurations/RigidBot/Configuration.h
View file

@ -982,7 +982,7 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
//define this to enable EEPROM support // Define this to enable EEPROM support
#define EEPROM_SETTINGS #define EEPROM_SETTINGS
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
@ -1507,13 +1507,13 @@
// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
//#define SF_ARC_FIX //#define SF_ARC_FIX
// Support for the BariCUDA Paste Extruder. // Support for the BariCUDA Paste Extruder
//#define BARICUDA //#define BARICUDA
//define BlinkM/CyzRgb Support // Support for BlinkM/CyzRgb
//#define BLINKM //#define BLINKM
//define PCA9632 PWM LED driver Support // Support for PCA9632 PWM LED driver
//#define PCA9632 //#define PCA9632
/** /**

8
Marlin/example_configurations/SCARA/Configuration.h
View file

@ -996,7 +996,7 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
//define this to enable EEPROM support // Define this to enable EEPROM support
//#define EEPROM_SETTINGS //#define EEPROM_SETTINGS
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
@ -1519,13 +1519,13 @@
// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
//#define SF_ARC_FIX //#define SF_ARC_FIX
// Support for the BariCUDA Paste Extruder. // Support for the BariCUDA Paste Extruder
//#define BARICUDA //#define BARICUDA
//define BlinkM/CyzRgb Support // Support for BlinkM/CyzRgb
//#define BLINKM //#define BLINKM
//define PCA9632 PWM LED driver Support // Support for PCA9632 PWM LED driver
//#define PCA9632 //#define PCA9632
/** /**

8
Marlin/example_configurations/TAZ4/Configuration.h
View file

@ -1003,7 +1003,7 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
//define this to enable EEPROM support // Define this to enable EEPROM support
#define EEPROM_SETTINGS #define EEPROM_SETTINGS
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
@ -1526,13 +1526,13 @@
// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
//#define SF_ARC_FIX //#define SF_ARC_FIX
// Support for the BariCUDA Paste Extruder. // Support for the BariCUDA Paste Extruder
//#define BARICUDA //#define BARICUDA
//define BlinkM/CyzRgb Support // Support for BlinkM/CyzRgb
//#define BLINKM //#define BLINKM
//define PCA9632 PWM LED driver Support // Support for PCA9632 PWM LED driver
//#define PCA9632 //#define PCA9632
/** /**

8
Marlin/example_configurations/TinyBoy2/Configuration.h
View file

@ -1040,7 +1040,7 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
//define this to enable EEPROM support // Define this to enable EEPROM support
#define EEPROM_SETTINGS #define EEPROM_SETTINGS
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
@ -1568,13 +1568,13 @@
// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
//#define SF_ARC_FIX //#define SF_ARC_FIX
// Support for the BariCUDA Paste Extruder. // Support for the BariCUDA Paste Extruder
//#define BARICUDA //#define BARICUDA
//define BlinkM/CyzRgb Support // Support for BlinkM/CyzRgb
//#define BLINKM //#define BLINKM
//define PCA9632 PWM LED driver Support // Support for PCA9632 PWM LED driver
//#define PCA9632 //#define PCA9632
/** /**

8
Marlin/example_configurations/WITBOX/Configuration.h
View file

@ -974,7 +974,7 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
//define this to enable EEPROM support // Define this to enable EEPROM support
//#define EEPROM_SETTINGS //#define EEPROM_SETTINGS
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
@ -1497,13 +1497,13 @@
// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
//#define SF_ARC_FIX //#define SF_ARC_FIX
// Support for the BariCUDA Paste Extruder. // Support for the BariCUDA Paste Extruder
//#define BARICUDA //#define BARICUDA
//define BlinkM/CyzRgb Support // Support for BlinkM/CyzRgb
//#define BLINKM //#define BLINKM
//define PCA9632 PWM LED driver Support // Support for PCA9632 PWM LED driver
//#define PCA9632 //#define PCA9632
/** /**

8
Marlin/example_configurations/adafruit/ST7565/Configuration.h
View file

@ -984,7 +984,7 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
//define this to enable EEPROM support // Define this to enable EEPROM support
//#define EEPROM_SETTINGS //#define EEPROM_SETTINGS
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
@ -1507,13 +1507,13 @@
// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
//#define SF_ARC_FIX //#define SF_ARC_FIX
// Support for the BariCUDA Paste Extruder. // Support for the BariCUDA Paste Extruder
//#define BARICUDA //#define BARICUDA
//define BlinkM/CyzRgb Support // Support for BlinkM/CyzRgb
//#define BLINKM //#define BLINKM
//define PCA9632 PWM LED driver Support // Support for PCA9632 PWM LED driver
//#define PCA9632 //#define PCA9632
/** /**

8
Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h
View file

@ -1104,7 +1104,7 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
//define this to enable EEPROM support // Define this to enable EEPROM support
#define EEPROM_SETTINGS #define EEPROM_SETTINGS
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
@ -1628,13 +1628,13 @@
// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
//#define SF_ARC_FIX //#define SF_ARC_FIX
// Support for the BariCUDA Paste Extruder. // Support for the BariCUDA Paste Extruder
//#define BARICUDA //#define BARICUDA
//define BlinkM/CyzRgb Support // Support for BlinkM/CyzRgb
//#define BLINKM //#define BLINKM
//define PCA9632 PWM LED driver Support // Support for PCA9632 PWM LED driver
//#define PCA9632 //#define PCA9632
/** /**

8
Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h
View file

@ -1106,7 +1106,7 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
//define this to enable EEPROM support // Define this to enable EEPROM support
#define EEPROM_SETTINGS #define EEPROM_SETTINGS
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
@ -1629,13 +1629,13 @@
// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
//#define SF_ARC_FIX //#define SF_ARC_FIX
// Support for the BariCUDA Paste Extruder. // Support for the BariCUDA Paste Extruder
//#define BARICUDA //#define BARICUDA
//define BlinkM/CyzRgb Support // Support for BlinkM/CyzRgb
//#define BLINKM //#define BLINKM
//define PCA9632 PWM LED driver Support // Support for PCA9632 PWM LED driver
//#define PCA9632 //#define PCA9632
/** /**

8
Marlin/example_configurations/delta/generic/Configuration.h
View file

@ -1095,7 +1095,7 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
//define this to enable EEPROM support // Define this to enable EEPROM support
//#define EEPROM_SETTINGS //#define EEPROM_SETTINGS
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
@ -1618,13 +1618,13 @@
// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
//#define SF_ARC_FIX //#define SF_ARC_FIX
// Support for the BariCUDA Paste Extruder. // Support for the BariCUDA Paste Extruder
//#define BARICUDA //#define BARICUDA
//define BlinkM/CyzRgb Support // Support for BlinkM/CyzRgb
//#define BLINKM //#define BLINKM
//define PCA9632 PWM LED driver Support // Support for PCA9632 PWM LED driver
//#define PCA9632 //#define PCA9632
/** /**

8
Marlin/example_configurations/delta/kossel_mini/Configuration.h
View file

@ -1098,7 +1098,7 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
//define this to enable EEPROM support // Define this to enable EEPROM support
//#define EEPROM_SETTINGS //#define EEPROM_SETTINGS
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
@ -1621,13 +1621,13 @@
// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
//#define SF_ARC_FIX //#define SF_ARC_FIX
// Support for the BariCUDA Paste Extruder. // Support for the BariCUDA Paste Extruder
//#define BARICUDA //#define BARICUDA
//define BlinkM/CyzRgb Support // Support for BlinkM/CyzRgb
//#define BLINKM //#define BLINKM
//define PCA9632 PWM LED driver Support // Support for PCA9632 PWM LED driver
//#define PCA9632 //#define PCA9632
/** /**

8
Marlin/example_configurations/delta/kossel_pro/Configuration.h
View file

@ -1103,7 +1103,7 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
//define this to enable EEPROM support // Define this to enable EEPROM support
//#define EEPROM_SETTINGS //#define EEPROM_SETTINGS
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
@ -1626,13 +1626,13 @@
// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
//#define SF_ARC_FIX //#define SF_ARC_FIX
// Support for the BariCUDA Paste Extruder. // Support for the BariCUDA Paste Extruder
//#define BARICUDA //#define BARICUDA
//define BlinkM/CyzRgb Support // Support for BlinkM/CyzRgb
//#define BLINKM //#define BLINKM
//define PCA9632 PWM LED driver Support // Support for PCA9632 PWM LED driver
//#define PCA9632 //#define PCA9632
/** /**

8
Marlin/example_configurations/delta/kossel_xl/Configuration.h
View file

@ -1161,7 +1161,7 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
//define this to enable EEPROM support // Define this to enable EEPROM support
#define EEPROM_SETTINGS #define EEPROM_SETTINGS
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
@ -1684,13 +1684,13 @@
// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
//#define SF_ARC_FIX //#define SF_ARC_FIX
// Support for the BariCUDA Paste Extruder. // Support for the BariCUDA Paste Extruder
//#define BARICUDA //#define BARICUDA
//define BlinkM/CyzRgb Support // Support for BlinkM/CyzRgb
//#define BLINKM //#define BLINKM
//define PCA9632 PWM LED driver Support // Support for PCA9632 PWM LED driver
//#define PCA9632 //#define PCA9632
/** /**

8
Marlin/example_configurations/gCreate_gMax1.5+/Configuration.h
View file

@ -1000,7 +1000,7 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
//define this to enable EEPROM support // Define this to enable EEPROM support
#define EEPROM_SETTINGS #define EEPROM_SETTINGS
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
@ -1523,13 +1523,13 @@
// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
//#define SF_ARC_FIX //#define SF_ARC_FIX
// Support for the BariCUDA Paste Extruder. // Support for the BariCUDA Paste Extruder
//#define BARICUDA //#define BARICUDA
//define BlinkM/CyzRgb Support // Support for BlinkM/CyzRgb
//#define BLINKM //#define BLINKM
//define PCA9632 PWM LED driver Support // Support for PCA9632 PWM LED driver
//#define PCA9632 //#define PCA9632
/** /**

8
Marlin/example_configurations/makibox/Configuration.h
View file

@ -987,7 +987,7 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
//define this to enable EEPROM support // Define this to enable EEPROM support
#define EEPROM_SETTINGS #define EEPROM_SETTINGS
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
@ -1510,13 +1510,13 @@
// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
//#define SF_ARC_FIX //#define SF_ARC_FIX
// Support for the BariCUDA Paste Extruder. // Support for the BariCUDA Paste Extruder
//#define BARICUDA //#define BARICUDA
//define BlinkM/CyzRgb Support // Support for BlinkM/CyzRgb
//#define BLINKM //#define BLINKM
//define PCA9632 PWM LED driver Support // Support for PCA9632 PWM LED driver
//#define PCA9632 //#define PCA9632
/** /**

8
Marlin/example_configurations/tvrrug/Round2/Configuration.h
View file

@ -979,7 +979,7 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
//define this to enable EEPROM support // Define this to enable EEPROM support
//#define EEPROM_SETTINGS //#define EEPROM_SETTINGS
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
@ -1502,13 +1502,13 @@
// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
//#define SF_ARC_FIX //#define SF_ARC_FIX
// Support for the BariCUDA Paste Extruder. // Support for the BariCUDA Paste Extruder
//#define BARICUDA //#define BARICUDA
//define BlinkM/CyzRgb Support // Support for BlinkM/CyzRgb
//#define BLINKM //#define BLINKM
//define PCA9632 PWM LED driver Support // Support for PCA9632 PWM LED driver
//#define PCA9632 //#define PCA9632
/** /**

8
Marlin/example_configurations/wt150/Configuration.h
View file

@ -990,7 +990,7 @@
// M500 - stores parameters in EEPROM // M500 - stores parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
//define this to enable EEPROM support // Define this to enable EEPROM support
#define EEPROM_SETTINGS #define EEPROM_SETTINGS
#if ENABLED(EEPROM_SETTINGS) #if ENABLED(EEPROM_SETTINGS)
@ -1513,13 +1513,13 @@
// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
//#define SF_ARC_FIX //#define SF_ARC_FIX
// Support for the BariCUDA Paste Extruder. // Support for the BariCUDA Paste Extruder
//#define BARICUDA //#define BARICUDA
//define BlinkM/CyzRgb Support // Support for BlinkM/CyzRgb
//#define BLINKM //#define BLINKM
//define PCA9632 PWM LED driver Support // Support for PCA9632 PWM LED driver
//#define PCA9632 //#define PCA9632
/** /**