From 5ca6334fd20daf65bf83cab613fbfe847cd2ab43 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sat, 7 May 2016 18:41:20 -0700 Subject: [PATCH] Cleanup pins files, fixup analogtodigitalpin, etc. --- Marlin/Marlin.h | 5 -- Marlin/pins.h | 136 +++++++++++++++++++++++++++------ Marlin/pins_5DPRINT.h | 20 ----- Marlin/pins_99.h | 8 -- Marlin/pins_A4JP.h | 18 ----- Marlin/pins_BRAINWAVE.h | 8 -- Marlin/pins_BRAINWAVE_PRO.h | 6 -- Marlin/pins_CHEAPTRONIC.h | 29 +------ Marlin/pins_ELEFU_3.h | 5 -- Marlin/pins_GEN3_MONOLITHIC.h | 15 ---- Marlin/pins_GEN3_PLUS.h | 9 --- Marlin/pins_GEN6.h | 15 +--- Marlin/pins_GEN7_12.h | 15 +--- Marlin/pins_GEN7_14.h | 13 ---- Marlin/pins_GEN7_CUSTOM.h | 10 --- Marlin/pins_LEAPFROG.h | 5 -- Marlin/pins_MEGACONTROLLER.h | 5 -- Marlin/pins_MEGATRONICS.h | 8 +- Marlin/pins_MEGATRONICS_2.h | 21 ++--- Marlin/pins_MEGATRONICS_3.h | 28 +++++-- Marlin/pins_MINIRAMBO.h | 22 ------ Marlin/pins_MINITRONICS.h | 22 ++---- Marlin/pins_OMCA.h | 13 +--- Marlin/pins_OMCA_A.h | 12 +-- Marlin/pins_PRINTRBOARD.h | 7 -- Marlin/pins_PRINTRBOARD_REVF.h | 8 -- Marlin/pins_RAMBO.h | 18 ----- Marlin/pins_RAMPS_14.h | 20 ++--- Marlin/pins_RAMPS_OLD.h | 6 -- Marlin/pins_RUMBA.h | 21 +---- Marlin/pins_SANGUINOLOLU_11.h | 26 ++----- Marlin/pins_SAV_MKI.h | 11 --- Marlin/pins_SETHI.h | 9 --- Marlin/pins_TEENSY2.h | 7 -- Marlin/pins_TEENSYLU.h | 7 -- Marlin/pins_ULTIMAIN_2.h | 7 -- Marlin/pins_ULTIMAKER.h | 5 -- Marlin/pins_ULTIMAKER_OLD.h | 18 +---- 38 files changed, 173 insertions(+), 445 deletions(-) diff --git a/Marlin/Marlin.h b/Marlin/Marlin.h index 1a4f04d07..d15240740 100644 --- a/Marlin/Marlin.h +++ b/Marlin/Marlin.h @@ -52,11 +52,6 @@ typedef unsigned long millis_t; -// Arduino < 1.0.0 does not define this, so we need to do it ourselves -#ifndef analogInputToDigitalPin - #define analogInputToDigitalPin(p) ((p) + 0xA0) -#endif - #ifdef USBCON #include "HardwareSerial.h" #endif diff --git a/Marlin/pins.h b/Marlin/pins.h index a13df540c..2359306ba 100644 --- a/Marlin/pins.h +++ b/Marlin/pins.h @@ -23,20 +23,6 @@ #ifndef PINS_H #define PINS_H -// Preset optional pins -#define X_MS1_PIN -1 -#define X_MS2_PIN -1 -#define Y_MS1_PIN -1 -#define Y_MS2_PIN -1 -#define Z_MS1_PIN -1 -#define Z_MS2_PIN -1 -#define E0_MS1_PIN -1 -#define E0_MS2_PIN -1 -#define E1_MS1_PIN -1 -#define E1_MS2_PIN -1 -#define HEATER_3_PIN -1 -#define TEMP_3_PIN -1 - #if MB(GEN7_CUSTOM) #include "pins_GEN7_CUSTOM.h" #elif MB(GEN7_12) @@ -157,21 +143,120 @@ #error Unknown MOTHERBOARD value set in Configuration.h #endif +// Define certain undefined pins +#ifndef X_MS1_PIN + #define X_MS1_PIN -1 +#endif +#ifndef X_MS2_PIN + #define X_MS2_PIN -1 +#endif +#ifndef Y_MS1_PIN + #define Y_MS1_PIN -1 +#endif +#ifndef Y_MS2_PIN + #define Y_MS2_PIN -1 +#endif +#ifndef Z_MS1_PIN + #define Z_MS1_PIN -1 +#endif +#ifndef Z_MS2_PIN + #define Z_MS2_PIN -1 +#endif +#ifndef E0_MS1_PIN + #define E0_MS1_PIN -1 +#endif +#ifndef E0_MS2_PIN + #define E0_MS2_PIN -1 +#endif +#ifndef E1_MS1_PIN + #define E1_MS1_PIN -1 +#endif +#ifndef E1_MS2_PIN + #define E1_MS2_PIN -1 +#endif + +#ifndef FAN_PIN + #define FAN_PIN -1 +#endif +#ifndef FAN1_PIN + #define FAN1_PIN -1 +#endif +#ifndef FAN2_PIN + #define FAN2_PIN -1 +#endif + +#ifndef HEATER_0_PIN + #define HEATER_0_PIN -1 +#endif +#ifndef HEATER_1_PIN + #define HEATER_1_PIN -1 +#endif +#ifndef HEATER_2_PIN + #define HEATER_2_PIN -1 +#endif +#ifndef HEATER_3_PIN + #define HEATER_3_PIN -1 +#endif +#ifndef HEATER_BED_PIN + #define HEATER_BED_PIN -1 +#endif + +#ifndef TEMP_0_PIN + #define TEMP_0_PIN -1 +#endif +#ifndef TEMP_1_PIN + #define TEMP_1_PIN -1 +#endif +#ifndef TEMP_2_PIN + #define TEMP_2_PIN -1 +#endif +#ifndef TEMP_3_PIN + #define TEMP_3_PIN -1 +#endif +#ifndef TEMP_BED_PIN + #define TEMP_BED_PIN -1 +#endif + +#ifndef SD_DETECT_PIN + #define SD_DETECT_PIN -1 +#endif +#ifndef SDPOWER + #define SDPOWER -1 +#endif +#ifndef SDSS + #define SDSS -1 +#endif +#ifndef LED_PIN + #define LED_PIN -1 +#endif +#ifndef PS_ON_PIN + #define PS_ON_PIN -1 +#endif +#ifndef KILL_PIN + #define KILL_PIN -1 +#endif +#ifndef SUICIDE_PIN + #define SUICIDE_PIN -1 +#endif + +// Marlin needs to account for pins that equal -1 +#define marlinAnalogInputToDigitalPin(p) ((p) == -1 ? -1 : (p) + 0xA0) + // List of pins which to ignore when asked to change by gcode, 0 and 1 are RX and TX, do not mess with those! -#define _E0_PINS E0_STEP_PIN, E0_DIR_PIN, E0_ENABLE_PIN, HEATER_0_PIN, analogInputToDigitalPin(TEMP_0_PIN), +#define _E0_PINS E0_STEP_PIN, E0_DIR_PIN, E0_ENABLE_PIN, E0_MS1_PIN, E0_MS2_PIN, HEATER_0_PIN, EXTRUDER_0_AUTO_FAN_PIN, marlinAnalogInputToDigitalPin(TEMP_0_PIN), #define _E1_PINS #define _E2_PINS #define _E3_PINS #if EXTRUDERS > 1 #undef _E1_PINS - #define _E1_PINS E1_STEP_PIN, E1_DIR_PIN, E1_ENABLE_PIN, HEATER_1_PIN, analogInputToDigitalPin(TEMP_1_PIN), + #define _E1_PINS E1_STEP_PIN, E1_DIR_PIN, E1_ENABLE_PIN, HEATER_1_PIN, E1_MS1_PIN, E1_MS2_PIN, EXTRUDER_1_AUTO_FAN_PIN, marlinAnalogInputToDigitalPin(TEMP_1_PIN), #if EXTRUDERS > 2 #undef _E2_PINS - #define _E2_PINS E2_STEP_PIN, E2_DIR_PIN, E2_ENABLE_PIN, HEATER_2_PIN, analogInputToDigitalPin(TEMP_2_PIN), + #define _E2_PINS E2_STEP_PIN, E2_DIR_PIN, E2_ENABLE_PIN, HEATER_2_PIN, EXTRUDER_2_AUTO_FAN_PIN, marlinAnalogInputToDigitalPin(TEMP_2_PIN), #if EXTRUDERS > 3 #undef _E3_PINS - #define _E3_PINS E3_STEP_PIN, E3_DIR_PIN, E3_ENABLE_PIN, HEATER_3_PIN, analogInputToDigitalPin(TEMP_3_PIN), + #define _E3_PINS E3_STEP_PIN, E3_DIR_PIN, E3_ENABLE_PIN, HEATER_3_PIN, EXTRUDER_3_AUTO_FAN_PIN, marlinAnalogInputToDigitalPin(TEMP_3_PIN), #endif #endif #elif ENABLED(Y_DUAL_STEPPER_DRIVERS) || ENABLED(Z_DUAL_STEPPER_DRIVERS) @@ -179,6 +264,11 @@ #define _E1_PINS E1_STEP_PIN, E1_DIR_PIN, E1_ENABLE_PIN, #endif +#define BED_PINS HEATER_BED_PIN, marlinAnalogInputToDigitalPin(TEMP_BED_PIN), + +// +// Assign endstop pins for boards with only 3 connectors +// #ifdef X_STOP_PIN #if X_HOME_DIR < 0 #define X_MIN_PIN X_STOP_PIN @@ -209,6 +299,9 @@ #endif #endif +// +// Disable unused endstop / probe pins +// #if ENABLED(DISABLE_Z_MIN_PROBE_ENDSTOP) || DISABLED(Z_MIN_PROBE_ENDSTOP) // Allow code to compile regardless of Z_MIN_PROBE_ENDSTOP setting. #undef Z_MIN_PROBE_PIN #define Z_MIN_PROBE_PIN -1 @@ -270,10 +363,9 @@ X_STEP_PIN, X_DIR_PIN, X_ENABLE_PIN, X_MIN_PIN, X_MAX_PIN, \ Y_STEP_PIN, Y_DIR_PIN, Y_ENABLE_PIN, Y_MIN_PIN, Y_MAX_PIN, \ Z_STEP_PIN, Z_DIR_PIN, Z_ENABLE_PIN, Z_MIN_PIN, Z_MAX_PIN, Z_MIN_PROBE_PIN, \ - PS_ON_PIN, HEATER_BED_PIN, FAN_PIN, CONTROLLERFAN_PIN, \ - EXTRUDER_0_AUTO_FAN_PIN, EXTRUDER_1_AUTO_FAN_PIN, EXTRUDER_2_AUTO_FAN_PIN, EXTRUDER_3_AUTO_FAN_PIN, \ - _E0_PINS _E1_PINS _E2_PINS _E3_PINS \ - analogInputToDigitalPin(TEMP_BED_PIN) \ + PS_ON_PIN, HEATER_BED_PIN, FAN_PIN, FAN1_PIN, FAN2_PIN, CONTROLLERFAN_PIN, \ + _E0_PINS _E1_PINS _E2_PINS _E3_PINS BED_PINS \ + X_MS1_PIN, X_MS2_PIN, Y_MS1_PIN, Y_MS2_PIN, Z_MS1_PIN, Z_MS2_PIN \ } #define HAS_DIGIPOTSS (PIN_EXISTS(DIGIPOTSS)) diff --git a/Marlin/pins_5DPRINT.h b/Marlin/pins_5DPRINT.h index 170717870..a7b1beda1 100644 --- a/Marlin/pins_5DPRINT.h +++ b/Marlin/pins_5DPRINT.h @@ -54,8 +54,6 @@ #define E0_ENABLE_PIN 17 #define HEATER_0_PIN 21 // Extruder -#define HEATER_1_PIN -1 -#define HEATER_2_PIN -1 #define HEATER_BED_PIN 20 // Bed // You may need to change FAN_PIN to 16 because Marlin isn't using fastio.h // for the fan and Teensyduino uses a different pin mapping. @@ -64,14 +62,6 @@ #define TEMP_0_PIN 1 // Extruder / Analog pin numbering #define TEMP_BED_PIN 0 // Bed / Analog pin numbering -#define TEMP_1_PIN -1 -#define TEMP_2_PIN -1 - -#define SDPOWER -1 -#define LED_PIN -1 -#define PS_ON_PIN -1 -#define KILL_PIN -1 - // The SDSS pin uses a different pin mapping from file Sd2PinMap.h #define SDSS 20 @@ -85,15 +75,6 @@ // Microstepping pins // Note that the pin mapping is not from fastio.h // See Sd2PinMap.h for the pin configurations - -#undef X_MS1_PIN -#undef X_MS2_PIN -#undef Y_MS1_PIN -#undef Y_MS2_PIN -#undef Z_MS1_PIN -#undef Z_MS2_PIN -#undef E0_MS1_PIN -#undef E0_MS2_PIN #define X_MS1_PIN 25 #define X_MS2_PIN 26 #define Y_MS1_PIN 9 @@ -102,4 +83,3 @@ #define Z_MS2_PIN 6 #define E0_MS1_PIN 5 #define E0_MS2_PIN 4 - diff --git a/Marlin/pins_99.h b/Marlin/pins_99.h index 1b050573f..8ae78b26e 100644 --- a/Marlin/pins_99.h +++ b/Marlin/pins_99.h @@ -43,18 +43,10 @@ #define E0_DIR_PIN 66 #define E0_ENABLE_PIN -1 -#define SDPOWER -1 #define SDSS 53 -#define LED_PIN -1 -#define FAN_PIN -1 #define PS_ON_PIN 9 -#define KILL_PIN -1 #define HEATER_0_PIN 13 -#define HEATER_1_PIN -1 -#define HEATER_2_PIN -1 #define TEMP_0_PIN 6 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! -#define TEMP_1_PIN -1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! -#define TEMP_2_PIN -1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! #define HEATER_BED_PIN 4 #define TEMP_BED_PIN 10 diff --git a/Marlin/pins_A4JP.h b/Marlin/pins_A4JP.h index 5cd0d3897..d64fbcce8 100644 --- a/Marlin/pins_A4JP.h +++ b/Marlin/pins_A4JP.h @@ -38,18 +38,6 @@ #define SLED_PIN -1 #endif -#undef X_MS1_PIN -#undef X_MS2_PIN -#undef Y_MS1_PIN -#undef Y_MS2_PIN -#undef Z_MS1_PIN -#undef Z_MS2_PIN -#undef E0_MS1_PIN -#undef E0_MS2_PIN -#undef E1_MS1_PIN -#undef E1_MS2_PIN - -#undef DIGIPOTSS_PIN //Fan_2 2 /***************** @@ -108,9 +96,6 @@ #define HEATER_0_PIN 9 #define TEMP_0_PIN 0 #define HEATER_1_PIN 7 -#define TEMP_1_PIN -1 -#define HEATER_2_PIN -1 -#define TEMP_2_PIN -1 #define E0_STEP_PIN 34 #define E0_DIR_PIN 43 @@ -126,13 +111,10 @@ #define DIGIPOTSS_PIN 38 #define DIGIPOT_CHANNELS {4,5,3,0,1} // X Y Z E0 E1 digipot channels to stepper driver mapping -#define SDPOWER -1 #define SDSS 53 #define LED_PIN 13 #define FAN_PIN 8 #define PS_ON_PIN 4 -#define KILL_PIN -1 -#define SUICIDE_PIN -1 //PIN that has to be turned on right after start, to keep power flowing. #define FAN_0_PIN 6 //Glen #define FAN_1_PIN 2 //Glen diff --git a/Marlin/pins_BRAINWAVE.h b/Marlin/pins_BRAINWAVE.h index a02b6515f..0ef9ec861 100644 --- a/Marlin/pins_BRAINWAVE.h +++ b/Marlin/pins_BRAINWAVE.h @@ -55,21 +55,13 @@ #define E0_ATT_PIN 20 #define HEATER_0_PIN 4 // Extruder -#define HEATER_1_PIN -1 -#define HEATER_2_PIN -1 #define HEATER_BED_PIN 38 // Bed #define FAN_PIN 3 // Fan #define TEMP_0_PIN 7 // Extruder / Analog pin numbering -#define TEMP_1_PIN -1 -#define TEMP_2_PIN -1 #define TEMP_BED_PIN 6 // Bed / Analog pin numbering -#define SDPOWER -1 -#define SDSS -1 #define LED_PIN 39 -#define PS_ON_PIN -1 -#define KILL_PIN -1 #if DISABLED(SDSUPPORT) // these pins are defined in the SD library if building with SD support diff --git a/Marlin/pins_BRAINWAVE_PRO.h b/Marlin/pins_BRAINWAVE_PRO.h index c79f04eb6..8ea2ab2f0 100644 --- a/Marlin/pins_BRAINWAVE_PRO.h +++ b/Marlin/pins_BRAINWAVE_PRO.h @@ -60,21 +60,15 @@ #define E0_ENABLE_PIN 13 #define HEATER_0_PIN 15 -#define HEATER_1_PIN -1 -#define HEATER_2_PIN -1 #define HEATER_BED_PIN 14 // Bed #define FAN_PIN 16 // Fan, PWM #define TEMP_0_PIN 2 // Extruder / Analog pin numbering #define TEMP_1_PIN 1 // Spare / Analog pin numbering -#define TEMP_2_PIN -1 #define TEMP_BED_PIN 0 // Bed / Analog pin numbering -#define SDPOWER -1 #define SDSS 20 #define LED_PIN 19 -#define PS_ON_PIN -1 -#define KILL_PIN -1 #define SD_DETECT_PIN 12 #if DISABLED(SDSUPPORT) diff --git a/Marlin/pins_CHEAPTRONIC.h b/Marlin/pins_CHEAPTRONIC.h index 1bbd97952..be602e322 100644 --- a/Marlin/pins_CHEAPTRONIC.h +++ b/Marlin/pins_CHEAPTRONIC.h @@ -35,27 +35,20 @@ #define X_DIR_PIN 15 #define X_ENABLE_PIN 24 -// X endstop -#define X_MIN_PIN 3 -#define X_MAX_PIN -1 - // Y motor stepper #define Y_STEP_PIN 35 #define Y_DIR_PIN 36 #define Y_ENABLE_PIN 31 -// Y endstop -#define Y_MIN_PIN 2 -#define Y_MAX_PIN -1 - // Z motor stepper #define Z_STEP_PIN 40 #define Z_DIR_PIN 41 #define Z_ENABLE_PIN 37 -// Z endstop -#define Z_MIN_PIN 5 -#define Z_MAX_PIN -1 +// XYZ endstops +#define X_STOP_PIN 3 +#define Y_STOP_PIN 2 +#define Z_STOP_PIN 5 // Extruder 0 stepper #define E0_STEP_PIN 26 @@ -67,27 +60,14 @@ #define E1_DIR_PIN 34 #define E1_ENABLE_PIN 30 -#define SDPOWER -1 -#define SDSS -1 -#define LED_PIN -1 - -// FAN -#define FAN_PIN -1 - -#define PS_ON_PIN -1 -#define KILL_PIN -1 #define HEATER_0_PIN 19 // EXTRUDER 1 #define HEATER_1_PIN 23 // EXTRUDER 2 -// HeatedBad #define HEATER_BED_PIN 22 -// Cheaptronic v1.0 hasent EXTRUDER 3 -#define HEATER_2_PIN -1 // Temperature sensors #define TEMP_0_PIN 15 #define TEMP_1_PIN 14 -#define TEMP_2_PIN -1 #define TEMP_BED_PIN 13 // Cheaptronic v1.0 doesn't support LCD @@ -108,4 +88,3 @@ #define BLEN_A 0 // Cheaptronic v1.0 doesn't use this -#define SD_DETECT_PIN -1 diff --git a/Marlin/pins_ELEFU_3.h b/Marlin/pins_ELEFU_3.h index 23f8b944f..876cba1d4 100644 --- a/Marlin/pins_ELEFU_3.h +++ b/Marlin/pins_ELEFU_3.h @@ -58,9 +58,6 @@ #define E0_DIR_PIN 41 #define E0_ENABLE_PIN 37 -#define SDPOWER -1 -#define LED_PIN -1 //Use +12V Aux port for LED Ring - #define FAN_PIN 16 //5V PWM #define PS_ON_PIN 10 //Set to -1 if using a manual switch on the PWRSW Connector @@ -77,8 +74,6 @@ #define BEEPER_PIN 36 -#define KILL_PIN -1 - // M240 Triggers a camera by emulating a Canon RC-1 Remote // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ #define PHOTOGRAPH_PIN 29 diff --git a/Marlin/pins_GEN3_MONOLITHIC.h b/Marlin/pins_GEN3_MONOLITHIC.h index ba61fd2a6..baae6c87a 100644 --- a/Marlin/pins_GEN3_MONOLITHIC.h +++ b/Marlin/pins_GEN3_MONOLITHIC.h @@ -62,22 +62,7 @@ #define HEATER_0_PIN 16 #define TEMP_0_PIN 0 -#define FAN_PIN -1 - -// bed pins -#define HEATER_BED_PIN -1 -#define TEMP_BED_PIN -1 - - -#define SDSS -1 -#define SDPOWER -1 -#define LED_PIN -1 - // pin for controlling the PSU. #define PS_ON_PIN 14 // Alex, Do this work on the card? // Alex extras from Gen3+ -#define KILL_PIN -1 -#define TEMP_1_PIN -1 -#define TEMP_2_PIN -1 -#define HEATER_2_PIN -1 diff --git a/Marlin/pins_GEN3_PLUS.h b/Marlin/pins_GEN3_PLUS.h index 15241bfb5..6eb149ae6 100644 --- a/Marlin/pins_GEN3_PLUS.h +++ b/Marlin/pins_GEN3_PLUS.h @@ -43,12 +43,7 @@ #define E0_STEP_PIN 17 #define E0_DIR_PIN 21 -#define LED_PIN -1 - -#define FAN_PIN -1 - #define PS_ON_PIN 14 -#define KILL_PIN -1 #define HEATER_0_PIN 12 // (extruder) @@ -59,9 +54,5 @@ #define E0_ENABLE_PIN 13 #define TEMP_0_PIN 0 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 33 extruder) -#define TEMP_1_PIN -1 -#define TEMP_2_PIN -1 #define TEMP_BED_PIN 5 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 34 bed) -#define SDPOWER -1 #define SDSS 4 -#define HEATER_2_PIN -1 diff --git a/Marlin/pins_GEN6.h b/Marlin/pins_GEN6.h index 6d1ce468d..97703515f 100644 --- a/Marlin/pins_GEN6.h +++ b/Marlin/pins_GEN6.h @@ -53,28 +53,15 @@ #define E0_DIR_PIN 2 //Edited @ EJE Electronics 20100715 #define E0_ENABLE_PIN 3 //Added @ EJE Electronics 20100715 #define TEMP_0_PIN 5 //changed @ rkoeppl 20110410 -#define TEMP_1_PIN -1 //changed @ rkoeppl 20110410 - -#define TEMP_2_PIN -1 //changed @ rkoeppl 20110410 #define HEATER_0_PIN 14 //changed @ rkoeppl 20110410 -#define HEATER_1_PIN -1 -#define HEATER_2_PIN -1 -#if MB(GEN6) - #define HEATER_BED_PIN -1 //changed @ rkoeppl 20110410 - #define TEMP_BED_PIN -1 //changed @ rkoeppl 20110410 -#else +#if !MB(GEN6) #define HEATER_BED_PIN 1 //changed @ rkoeppl 20110410 #define TEMP_BED_PIN 0 //changed @ rkoeppl 20110410 #endif -#define SDPOWER -1 #define SDSS 17 -#define LED_PIN -1 //changed @ rkoeppl 20110410 -#define FAN_PIN -1 //changed @ rkoeppl 20110410 -#define PS_ON_PIN -1 //changed @ rkoeppl 20110410 -#define KILL_PIN -1 //changed @ drakelive 20120830 //our pin for debugging. #define DEBUG_PIN 0 diff --git a/Marlin/pins_GEN7_12.h b/Marlin/pins_GEN7_12.h index 0c23c0648..0d8c73d12 100644 --- a/Marlin/pins_GEN7_12.h +++ b/Marlin/pins_GEN7_12.h @@ -57,25 +57,14 @@ #define E0_ENABLE_PIN 24 #define TEMP_0_PIN 1 -#define TEMP_1_PIN -1 -#define TEMP_2_PIN -1 #define TEMP_BED_PIN 2 #define HEATER_0_PIN 4 -#define HEATER_1_PIN -1 -#define HEATER_2_PIN -1 #define HEATER_BED_PIN 3 -#define KILL_PIN -1 -#define SDPOWER -1 -#define SDSS -1 // SCL pin of I2C header -#define LED_PIN -1 - -#if (GEN7_VERSION >= 13) - // Gen7 v1.3 removed the fan pin - #define FAN_PIN -1 -#else +// Gen7 v1.3 removed the fan pin +#if GEN7_VERSION < 13 #define FAN_PIN 31 #endif diff --git a/Marlin/pins_GEN7_14.h b/Marlin/pins_GEN7_14.h index 04a4fce1a..87e938134 100644 --- a/Marlin/pins_GEN7_14.h +++ b/Marlin/pins_GEN7_14.h @@ -54,23 +54,11 @@ #define E0_ENABLE_PIN 25 #define TEMP_0_PIN 1 -#define TEMP_1_PIN -1 -#define TEMP_2_PIN -1 #define TEMP_BED_PIN 0 #define HEATER_0_PIN 4 -#define HEATER_1_PIN -1 -#define HEATER_2_PIN -1 #define HEATER_BED_PIN 3 -#define KILL_PIN -1 - -#define SDPOWER -1 -#define SDSS -1 // SCL pin of I2C header -#define LED_PIN -1 - -#define FAN_PIN -1 - #define PS_ON_PIN 15 //our pin for debugging. @@ -79,4 +67,3 @@ //our RS485 pins #define TX_ENABLE_PIN 12 #define RX_ENABLE_PIN 13 - diff --git a/Marlin/pins_GEN7_CUSTOM.h b/Marlin/pins_GEN7_CUSTOM.h index 9150a41b9..a93aded8e 100644 --- a/Marlin/pins_GEN7_CUSTOM.h +++ b/Marlin/pins_GEN7_CUSTOM.h @@ -55,20 +55,13 @@ #define E0_ENABLE_PIN 24 #define TEMP_0_PIN 2 -#define TEMP_1_PIN -1 -#define TEMP_2_PIN -1 #define TEMP_BED_PIN 1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 34 bed) #define HEATER_0_PIN 4 -#define HEATER_1_PIN -1 -#define HEATER_2_PIN -1 #define HEATER_BED_PIN 3 // (bed) -#define SDPOWER -1 #define SDSS 31 // SCL pin of I2C header || CS Pin for SD Card support -#define LED_PIN -1 -#define FAN_PIN -1 #define PS_ON_PIN 19 //our pin for debugging. @@ -79,10 +72,7 @@ //#define RX_ENABLE_PIN 13 #define BEEPER_PIN -1 -#define SD_DETECT_PIN -1 -#define SUICIDE_PIN -1 //has to be defined; otherwise Power_off doesn't work -#define KILL_PIN -1 //Pins for 4bit LCD Support #define LCD_PINS_RS 18 #define LCD_PINS_ENABLE 17 diff --git a/Marlin/pins_LEAPFROG.h b/Marlin/pins_LEAPFROG.h index 8d1a2401a..153d16afa 100644 --- a/Marlin/pins_LEAPFROG.h +++ b/Marlin/pins_LEAPFROG.h @@ -54,13 +54,9 @@ #define E1_DIR_PIN 40 //40 #define E1_ENABLE_PIN 36 //36 -#define SDPOWER -1 #define SDSS 11 -#define SD_DETECT_PIN -1 // 10 optional also used as mode pin #define LED_PIN 13 #define FAN_PIN 7 -#define PS_ON_PIN -1 -#define KILL_PIN -1 #define SOL1_PIN 16 #define SOL2_PIN 17 @@ -69,7 +65,6 @@ #define HEATER_2_PIN 11 //-1 // 13 #define TEMP_0_PIN 13 //D27 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! #define TEMP_1_PIN 15 // 1 -#define TEMP_2_PIN -1 // 2 #define HEATER_BED_PIN 10 // 14/15 #define TEMP_BED_PIN 14 // 1,2 or I2C /* Unused (1) (2) (3) 4 5 6 7 8 9 10 11 12 13 (14) (15) (16) 17 (18) (19) (20) (21) (22) (23) 24 (25) (26) (27) 28 (29) (30) (31) */ diff --git a/Marlin/pins_MEGACONTROLLER.h b/Marlin/pins_MEGACONTROLLER.h index 61cd91be0..9e01e689e 100644 --- a/Marlin/pins_MEGACONTROLLER.h +++ b/Marlin/pins_MEGACONTROLLER.h @@ -63,7 +63,6 @@ #define E1_DIR_PIN 27 #define E1_ENABLE_PIN 25 -#define SDPOWER -1 #define SDSS 53 #define LED_PIN 13 @@ -72,12 +71,9 @@ #define FAN2_PIN 36 #define FAN_SOFT_PWM #define CONTROLLERFAN_PIN FAN2_PIN -#define PS_ON_PIN -1 -#define KILL_PIN -1 #define HEATER_0_PIN 29 // EXTRUDER 1 #define HEATER_1_PIN 34 // EXTRUDER 2 -#define HEATER_2_PIN -1 #if TEMP_SENSOR_0 == -1 #define TEMP_0_PIN 4 // ANALOG NUMBERING @@ -85,7 +81,6 @@ #define TEMP_0_PIN 0 // ANALOG NUMBERING #endif - #if TEMP_SENSOR_1 == -1 #define TEMP_1_PIN 5 // ANALOG NUMBERING #else diff --git a/Marlin/pins_MEGATRONICS.h b/Marlin/pins_MEGATRONICS.h index e25cf8a55..69c08a1ae 100644 --- a/Marlin/pins_MEGATRONICS.h +++ b/Marlin/pins_MEGATRONICS.h @@ -56,28 +56,22 @@ #define E1_DIR_PIN 36 #define E1_ENABLE_PIN 30 -#define SDPOWER -1 #define SDSS 53 #define LED_PIN 13 - #define FAN_PIN 7 // IO pin. Buffer needed #define PS_ON_PIN 12 -#define KILL_PIN -1 #define HEATER_0_PIN 9 #define HEATER_1_PIN 8 -#define HEATER_2_PIN -1 +#define HEATER_BED_PIN 10 // BED #if TEMP_SENSOR_0 == -1 #define TEMP_0_PIN 8 // ANALOG NUMBERING #else #define TEMP_0_PIN 13 // ANALOG NUMBERING #endif - #define TEMP_1_PIN 15 // ANALOG NUMBERING -#define TEMP_2_PIN -1 // ANALOG NUMBERING -#define HEATER_BED_PIN 10 // BED #define TEMP_BED_PIN 14 // ANALOG NUMBERING #define BEEPER_PIN 33 // AUX-4 diff --git a/Marlin/pins_MEGATRONICS_2.h b/Marlin/pins_MEGATRONICS_2.h index 186f15427..0c5c17dc1 100644 --- a/Marlin/pins_MEGATRONICS_2.h +++ b/Marlin/pins_MEGATRONICS_2.h @@ -60,45 +60,36 @@ #define E2_DIR_PIN 24 #define E2_ENABLE_PIN 22 -#define SDPOWER -1 #define SDSS 53 #define LED_PIN 13 #define FAN_PIN 7 #define FAN2_PIN 6 #define PS_ON_PIN 12 -#define KILL_PIN -1 - -#define HEATER_0_PIN 9 // EXTRUDER 1 -#define HEATER_1_PIN 8 // EXTRUDER 2 -#define HEATER_2_PIN -1 +#define HEATER_0_PIN 9 // EXTRUDER 1 #if TEMP_SENSOR_0 == -1 - #define TEMP_0_PIN 4 // ANALOG NUMBERING + #define TEMP_0_PIN 4 // ANALOG NUMBERING #else #define TEMP_0_PIN 13 // ANALOG NUMBERING #endif - +#define HEATER_1_PIN 8 // EXTRUDER 2 #if TEMP_SENSOR_1 == -1 - #define TEMP_1_PIN 8 // ANALOG NUMBERING + #define TEMP_1_PIN 8 // ANALOG NUMBERING #else #define TEMP_1_PIN 15 // ANALOG NUMBERING #endif -#define TEMP_2_PIN -1 // ANALOG NUMBERING - #define HEATER_BED_PIN 10 // BED - #if TEMP_SENSOR_BED == -1 - #define TEMP_BED_PIN 8 // ANALOG NUMBERING + #define TEMP_BED_PIN 8 // ANALOG NUMBERING #else #define TEMP_BED_PIN 14 // ANALOG NUMBERING #endif #define BEEPER_PIN 64 - #define LCD_PINS_RS 14 #define LCD_PINS_ENABLE 15 #define LCD_PINS_D4 30 @@ -106,7 +97,6 @@ #define LCD_PINS_D6 32 #define LCD_PINS_D7 33 - // Buttons are directly attached using keypad #define BTN_EN1 61 #define BTN_EN2 59 @@ -116,4 +106,3 @@ #define BLEN_B 1 #define BLEN_A 0 -#define SD_DETECT_PIN -1 // Megatronics doesn't use this diff --git a/Marlin/pins_MEGATRONICS_3.h b/Marlin/pins_MEGATRONICS_3.h index 46f98807b..93d6480a3 100644 --- a/Marlin/pins_MEGATRONICS_3.h +++ b/Marlin/pins_MEGATRONICS_3.h @@ -30,7 +30,6 @@ #define LARGE_FLASH true - #if ENABLED(Z_PROBE_SLED) #define SLED_PIN -1 #endif @@ -71,12 +70,10 @@ #define E2_DIR_PIN 60 #define E2_ENABLE_PIN 23 -#define SDPOWER -1 #define SDSS 53 #define LED_PIN 13 #define PS_ON_PIN 12 -#define KILL_PIN -1 #define HEATER_0_PIN 2 #define HEATER_1_PIN 9 @@ -85,10 +82,26 @@ #define FAN_PIN 6 #define FAN2_PIN 7 -#define TEMP_0_PIN (TEMP_SENSOR_0 == -1 ? 11 : 15) // ANALOG NUMBERING -#define TEMP_1_PIN (TEMP_SENSOR_1 == -1 ? 10 : 13) // ANALOG NUMBERING -#define TEMP_2_PIN (TEMP_SENSOR_2 == -1 ? 9 : 12) // ANALOG NUMBERING -#define TEMP_BED_PIN (TEMP_SENSOR_BED == -1 ? 8 : 14) // ANALOG NUMBERING +#if TEMP_SENSOR_0 == -1 + #define TEMP_0_PIN 11 // ANALOG NUMBERING +#else + #define TEMP_0_PIN 15 // ANALOG NUMBERING +#endif +#if TEMP_SENSOR_1 == -1 + #define TEMP_1_PIN 10 // ANALOG NUMBERING +#else + #define TEMP_1_PIN 13 // ANALOG NUMBERING +#endif +#if TEMP_SENSOR_2 == -1 + #define TEMP_2_PIN 9 // ANALOG NUMBERING +#else + #define TEMP_2_PIN 12 // ANALOG NUMBERING +#endif +#if TEMP_SENSOR_BED == -1 + #define TEMP_BED_PIN 8 // ANALOG NUMBERING +#else + #define TEMP_BED_PIN 14 // ANALOG NUMBERING +#endif #define BEEPER_PIN 61 @@ -113,4 +126,3 @@ #define BLEN_B 1 #define BLEN_A 0 -#define SD_DETECT_PIN -1 // Megatronics doesn't use this diff --git a/Marlin/pins_MINIRAMBO.h b/Marlin/pins_MINIRAMBO.h index a67dd9c3a..dd2361df4 100644 --- a/Marlin/pins_MINIRAMBO.h +++ b/Marlin/pins_MINIRAMBO.h @@ -30,18 +30,6 @@ #define LARGE_FLASH true - -#undef X_MS1_PIN -#undef X_MS2_PIN -#undef Y_MS1_PIN -#undef Y_MS2_PIN -#undef Z_MS1_PIN -#undef Z_MS2_PIN -#undef E0_MS1_PIN -#undef E0_MS2_PIN -#undef E1_MS1_PIN -#undef E1_MS2_PIN - #define X_STEP_PIN 37 #define X_DIR_PIN 48 #define X_MIN_PIN 12 @@ -77,12 +65,8 @@ #if ENABLED(BARICUDA) #define HEATER_2_PIN 6 -#else - #define HEATER_2_PIN -1 #endif -#define TEMP_2_PIN -1 - #define E0_STEP_PIN 34 #define E0_DIR_PIN 43 #define E0_ENABLE_PIN 26 @@ -92,8 +76,6 @@ #define E1_STEP_PIN -1 #define E1_DIR_PIN -1 #define E1_ENABLE_PIN -1 -#define E1_MS1_PIN -1 -#define E1_MS2_PIN -1 #define MOTOR_CURRENT_PWM_XY_PIN 46 #define MOTOR_CURRENT_PWM_Z_PIN 45 @@ -101,14 +83,10 @@ //Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range #define MOTOR_CURRENT_PWM_RANGE 2000 #define DEFAULT_PWM_MOTOR_CURRENT {1300, 1300, 1250} -#define SDPOWER -1 #define SDSS 53 #define LED_PIN 13 #define FAN_PIN 8 #define FAN_1_PIN 6 -#define PS_ON_PIN -1 -#define KILL_PIN -1 // 80 with Smart Controller LCD -#define SUICIDE_PIN -1 // PIN that has to be turned on right after start, to keep power flowing. #if ENABLED(ULTRA_LCD) diff --git a/Marlin/pins_MINITRONICS.h b/Marlin/pins_MINITRONICS.h index 8bd7b5fc1..6677145ef 100644 --- a/Marlin/pins_MINITRONICS.h +++ b/Marlin/pins_MINITRONICS.h @@ -60,27 +60,19 @@ #define E2_DIR_PIN -1 #define E2_ENABLE_PIN -1 -#define SDPOWER -1 #define SDSS 16 #define LED_PIN 46 #define FAN_PIN 9 -#define FAN2_PIN -1 -#define PS_ON_PIN -1 -#define KILL_PIN -1 -#define HEATER_0_PIN 7 // EXTRUDER 1 -#define HEATER_1_PIN 8 // EXTRUDER 2 -#define HEATER_2_PIN -1 - - -#define TEMP_0_PIN 7 // ANALOG NUMBERING -#define TEMP_1_PIN 6 // ANALOG NUMBERING -#define TEMP_2_PIN -1 // ANALOG NUMBERING - -#define HEATER_BED_PIN 3 // BED +#define TEMP_0_PIN 7 // ANALOG NUMBERING +#define TEMP_1_PIN 6 // ANALOG NUMBERING #define TEMP_BED_PIN 6 // ANALOG NUMBERING +#define HEATER_0_PIN 7 // EXTRUDER 1 +#define HEATER_1_PIN 8 // EXTRUDER 2 +#define HEATER_BED_PIN 3 // BED + #define BEEPER_PIN -1 #define LCD_PINS_RS -1 @@ -90,7 +82,6 @@ #define LCD_PINS_D6 -1 #define LCD_PINS_D7 -1 - // Buttons are directly attached using keypad #define BTN_EN1 -1 #define BTN_EN2 -1 @@ -100,4 +91,3 @@ #define BLEN_B 1 #define BLEN_A 0 -#define SD_DETECT_PIN -1 // Minitronics doesn't use this diff --git a/Marlin/pins_OMCA.h b/Marlin/pins_OMCA.h index e98439608..85a140423 100644 --- a/Marlin/pins_OMCA.h +++ b/Marlin/pins_OMCA.h @@ -90,23 +90,14 @@ #define E2_DIR_PIN -1 // 20 #define E2_ENABLE_PIN -1 // 18 -#define SDPOWER -1 #define SDSS 11 -#define SD_DETECT_PIN -1 // 10 optional also used as mode pin -#define LED_PIN -1 #define FAN_PIN 14 // PWM on MIDDLE connector -#define PS_ON_PIN -1 -#define KILL_PIN -1 #define HEATER_0_PIN 3 // DONE PWM on RIGHT connector -#define HEATER_1_PIN -1 -#define HEATER_2_PIN -1 -#define HEATER_1_PIN -1 -#define HEATER_2_PIN -1 +#define HEATER_BED_PIN 4 + #define TEMP_0_PIN 0 // ANALOG INPUT NUMBERING #define TEMP_1_PIN 1 // ANALOG -#define TEMP_2_PIN -1 // 2 -#define HEATER_BED_PIN 4 #define TEMP_BED_PIN 2 // 1,2 or I2C #define I2C_SCL 16 diff --git a/Marlin/pins_OMCA_A.h b/Marlin/pins_OMCA_A.h index 147006de7..6e1536e57 100644 --- a/Marlin/pins_OMCA_A.h +++ b/Marlin/pins_OMCA_A.h @@ -81,20 +81,10 @@ #define E2_DIR_PIN -1 // 16 #define E2_ENABLE_PIN 24 -#define SDPOWER -1 #define SDSS 11 -#define SD_DETECT_PIN -1 // 10 optional also used as mode pin -#define LED_PIN -1 #define FAN_PIN 3 -#define PS_ON_PIN -1 -#define KILL_PIN -1 #define HEATER_0_PIN 4 -#define HEATER_1_PIN -1 // 12 -#define HEATER_2_PIN -1 // 13 #define TEMP_0_PIN 0 //D27 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! -#define TEMP_1_PIN -1 // 1 -#define TEMP_2_PIN -1 // 2 -#define HEATER_BED_PIN -1 // 14/15 -#define TEMP_BED_PIN -1 // 1,2 or I2C + /* Unused (1) (2) (3) 4 5 6 7 8 9 10 11 12 13 (14) (15) (16) 17 (18) (19) (20) (21) (22) (23) 24 (25) (26) (27) 28 (29) (30) (31) */ diff --git a/Marlin/pins_PRINTRBOARD.h b/Marlin/pins_PRINTRBOARD.h index bd269fc92..875bcfc5c 100644 --- a/Marlin/pins_PRINTRBOARD.h +++ b/Marlin/pins_PRINTRBOARD.h @@ -81,16 +81,9 @@ #define FILWIDTH_PIN 2 // ANALOG NUMBERING -#define TEMP_1_PIN -1 -#define TEMP_2_PIN -1 - ////LCD Pin Setup//// -#define SDPOWER -1 #define SDSS 26 -#define LED_PIN -1 -#define PS_ON_PIN -1 -#define KILL_PIN -1 #if DISABLED(SDSUPPORT) // these pins are defined in the SD library if building with SD support diff --git a/Marlin/pins_PRINTRBOARD_REVF.h b/Marlin/pins_PRINTRBOARD_REVF.h index bf4e2b4a4..c6317c3d8 100644 --- a/Marlin/pins_PRINTRBOARD_REVF.h +++ b/Marlin/pins_PRINTRBOARD_REVF.h @@ -75,17 +75,9 @@ #define FILWIDTH_PIN 2 // ANALOG NUMBERING -#define TEMP_1_PIN -1 -#define TEMP_2_PIN -1 - ////LCD Pin Setup//// -#define SDPOWER -1 #define SDSS 20 // Teensylu pin mapping -#define LED_PIN -1 -#define PS_ON_PIN -1 -#define KILL_PIN -1 -#define ALARM_PIN -1 // uncomment to enable an I2C based DAC like on the Printrboard REVF #define DAC_STEPPER_CURRENT diff --git a/Marlin/pins_RAMBO.h b/Marlin/pins_RAMBO.h index 39da6c75d..69c5bcdfd 100644 --- a/Marlin/pins_RAMBO.h +++ b/Marlin/pins_RAMBO.h @@ -40,17 +40,6 @@ #define SLED_PIN -1 #endif -#undef X_MS1_PIN -#undef X_MS2_PIN -#undef Y_MS1_PIN -#undef Y_MS2_PIN -#undef Z_MS1_PIN -#undef Z_MS2_PIN -#undef E0_MS1_PIN -#undef E0_MS2_PIN -#undef E1_MS1_PIN -#undef E1_MS2_PIN - #define X_STEP_PIN 37 #define X_DIR_PIN 48 #define X_MIN_PIN 12 @@ -86,12 +75,8 @@ #if ENABLED(BARICUDA) #define HEATER_2_PIN 6 -#else - #define HEATER_2_PIN -1 #endif -#define TEMP_2_PIN -1 - #define E0_STEP_PIN 34 #define E0_DIR_PIN 43 #define E0_ENABLE_PIN 26 @@ -107,7 +92,6 @@ #define DIGIPOTSS_PIN 38 #define DIGIPOT_CHANNELS {4,5,3,0,1} // X Y Z E0 E1 digipot channels to stepper driver mapping -#define SDPOWER -1 #define SDSS 53 #define LED_PIN 13 #define FAN_PIN 8 @@ -121,8 +105,6 @@ Fan_2 2 ***********************************************************/ #define PS_ON_PIN 4 -#define KILL_PIN -1 //80 with Smart Controller LCD -#define SUICIDE_PIN -1 //PIN that has to be turned on right after start, to keep power flowing. #if ENABLED(ULTRA_LCD) diff --git a/Marlin/pins_RAMPS_14.h b/Marlin/pins_RAMPS_14.h index dc1f219d3..dd22ac6fa 100644 --- a/Marlin/pins_RAMPS_14.h +++ b/Marlin/pins_RAMPS_14.h @@ -87,7 +87,6 @@ #define E1_DIR_PIN 34 #define E1_ENABLE_PIN 30 -#define SDPOWER -1 #define SDSS 53 #define LED_PIN 13 @@ -125,27 +124,18 @@ #define HEATER_0_PIN 8 #else #define HEATER_0_PIN 10 // EXTRUDER 1 + #if !MB(RAMPS_14_EEF) && !MB(RAMPS_13_EEF) && !MB(RAMPS_14_SF) && !MB(RAMPS_13_SF) + #define HEATER_BED_PIN 8 // BED + #endif #endif -#if MB(RAMPS_14_SF) || MB(RAMPS_13_SF) || ENABLED(IS_RAMPS_EFB) - #define HEATER_1_PIN -1 -#else +#if !MB(RAMPS_14_SF) && !MB(RAMPS_13_SF) && !ENABLED(IS_RAMPS_EFB) #define HEATER_1_PIN 9 // EXTRUDER 2 (FAN On Sprinter) #endif -#define HEATER_2_PIN -1 - #define TEMP_0_PIN 13 // ANALOG NUMBERING #define TEMP_1_PIN 15 // ANALOG NUMBERING -#define TEMP_2_PIN -1 // ANALOG NUMBERING - -#if MB(RAMPS_14_EFF) || MB(RAMPS_14_EEF) || MB(RAMPS_14_SF) || MB(RAMPS_13_EFF) || MB(RAMPS_13_EEF) || MB(RAMPS_13_SF) - #define HEATER_BED_PIN -1 // NO BED -#else - #define HEATER_BED_PIN 8 // BED -#endif - -#define TEMP_BED_PIN 14 // ANALOG NUMBERING +#define TEMP_BED_PIN 14 // ANALOG NUMBERING #if ENABLED(Z_PROBE_SLED) #define SLED_PIN -1 diff --git a/Marlin/pins_RAMPS_OLD.h b/Marlin/pins_RAMPS_OLD.h index 25193c8ed..951da2255 100644 --- a/Marlin/pins_RAMPS_OLD.h +++ b/Marlin/pins_RAMPS_OLD.h @@ -56,8 +56,6 @@ #define SDPOWER 48 #define SDSS 53 #define LED_PIN 13 -#define PS_ON_PIN -1 -#define KILL_PIN -1 #if ENABLED(RAMPS_V_1_0) // RAMPS_V_1_0 #define HEATER_0_PIN 12 // RAMPS 1.0 @@ -69,11 +67,7 @@ #define FAN_PIN 9 // RAMPS 1.1 #endif -#define HEATER_1_PIN -1 -#define HEATER_2_PIN -1 #define TEMP_0_PIN 2 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! -#define TEMP_1_PIN -1 -#define TEMP_2_PIN -1 #define TEMP_BED_PIN 1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! // SPI for Max6675 or Max31855 Thermocouple diff --git a/Marlin/pins_RUMBA.h b/Marlin/pins_RUMBA.h index 8464190c7..faec91ef1 100644 --- a/Marlin/pins_RUMBA.h +++ b/Marlin/pins_RUMBA.h @@ -77,10 +77,7 @@ #define PS_ON_PIN 45 #define KILL_PIN 46 -#if TEMP_SENSOR_0 == 0 - #define TEMP_0_PIN -1 - #define HEATER_0_PIN -1 -#else +#if TEMP_SENSOR_0 != 0 #define HEATER_0_PIN 2 // EXTRUDER 1 #if TEMP_SENSOR_0 == -1 #define TEMP_0_PIN 6 // ANALOG NUMBERING - connector *K1* on RUMBA thermocouple ADD ON is used @@ -89,10 +86,7 @@ #endif #endif -#if TEMP_SENSOR_1 == 0 - #define TEMP_1_PIN -1 - #define HEATER_1_PIN -1 -#else +#if TEMP_SENSOR_1 != 0 #define HEATER_1_PIN 3 // EXTRUDER 2 #if TEMP_SENSOR_1 == -1 #define TEMP_1_PIN 5 // ANALOG NUMBERING - connector *K2* on RUMBA thermocouple ADD ON is used @@ -101,10 +95,7 @@ #endif #endif -#if TEMP_SENSOR_2 == 0 - #define TEMP_2_PIN -1 - #define HEATER_2_PIN -1 -#else +#if TEMP_SENSOR_2 != 0 #define HEATER_2_PIN 6 // EXTRUDER 3 #if TEMP_SENSOR_2 == -1 #define TEMP_2_PIN 7 // ANALOG NUMBERING - connector *K3* on RUMBA thermocouple ADD ON is used <-- this can not be used when TEMP_SENSOR_BED is defined as thermocouple @@ -116,10 +107,7 @@ //optional for extruder 4 or chamber: #define TEMP_X_PIN 12 // ANALOG NUMBERING - default connector for thermistor *T3* on rumba board is used //optional FAN1 can be used as 4th heater output: #define HEATER_3_PIN 8 // EXTRUDER 4 -#if TEMP_SENSOR_BED == 0 - #define TEMP_BED_PIN -1 - #define HEATER_BED_PIN -1 -#else +#if TEMP_SENSOR_BED != 0 #define HEATER_BED_PIN 9 // BED #if TEMP_SENSOR_BED == -1 #define TEMP_BED_PIN 7 // ANALOG NUMBERING - connector *K3* on RUMBA thermocouple ADD ON is used <-- this can not be used when TEMP_SENSOR_2 is defined as thermocouple @@ -128,7 +116,6 @@ #endif #endif -#define SDPOWER -1 #define SDSS 53 #define SD_DETECT_PIN 49 #define BEEPER_PIN 44 diff --git a/Marlin/pins_SANGUINOLOLU_11.h b/Marlin/pins_SANGUINOLOLU_11.h index d84854878..a0720da16 100644 --- a/Marlin/pins_SANGUINOLOLU_11.h +++ b/Marlin/pins_SANGUINOLOLU_11.h @@ -43,28 +43,21 @@ #define E0_STEP_PIN 1 #define E0_DIR_PIN 0 -#define LED_PIN -1 -#define FAN_PIN -1 - #if MB(AZTEEG_X1) || MB(STB_11) || MB(MELZI) #define FAN_PIN 4 // Works for Panelolu2 too - #if MB(MELZI) - #define LED_PIN 27 // On some broken versions of the Sanguino libraries the pin definitions are wrong, so LED_PIN needs to be 28. But you should upgrade your Sanguino libraries! See #368. - #elif MB(STB_11) - #define LCD_PIN_BL 17 // LCD backlight LED - #endif +#endif + +#if MB(MELZI) + #define LED_PIN 27 // On some broken versions of the Sanguino libraries the pin definitions are wrong, so LED_PIN needs to be 28. But you should upgrade your Sanguino libraries! See #368. +#elif MB(STB_11) + #define LCD_PIN_BL 17 // LCD backlight LED #endif #if ENABLED(Z_PROBE_SLED) #define SLED_PIN -1 #endif -#define PS_ON_PIN -1 -#define KILL_PIN -1 - #define HEATER_0_PIN 13 // (extruder) -#define HEATER_1_PIN -1 -#define HEATER_2_PIN -1 #if ENABLED(SANGUINOLOLU_V_1_2) @@ -89,10 +82,7 @@ #endif #define TEMP_0_PIN 7 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 33 extruder) -#define TEMP_1_PIN -1 -#define TEMP_2_PIN -1 #define TEMP_BED_PIN 6 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 34 bed) -#define SDPOWER -1 #define SDSS 31 /** @@ -190,7 +180,3 @@ #define SD_DETECT_PIN -1 #endif // MAKRPANEL - -// #if FAN_PIN == 12 || FAN_PIN ==13 -//#define FAN_SOFT_PWM -// #endif diff --git a/Marlin/pins_SAV_MKI.h b/Marlin/pins_SAV_MKI.h index 579d653e0..323380bb1 100644 --- a/Marlin/pins_SAV_MKI.h +++ b/Marlin/pins_SAV_MKI.h @@ -53,12 +53,9 @@ #define E0_ENABLE_PIN 19 #define HEATER_0_PIN 21 // Extruder -#define HEATER_1_PIN -1 -#define HEATER_2_PIN -1 #define HEATER_BED_PIN 20 // Bed #define FAN_PIN 16 // Fan -- from Teensyduino environment. // For the fan and Teensyduino uses a different pin mapping. - #define X_STOP_PIN 13 #define Y_STOP_PIN 14 //#define Z_STOP_PIN 15 @@ -67,9 +64,6 @@ #define TEMP_0_PIN 7 // Extruder / Analog pin numbering #define TEMP_BED_PIN 6 // Bed / Analog pin numbering -#define TEMP_1_PIN -1 -#define TEMP_2_PIN -1 - #if DISABLED(SDSUPPORT) // these pins are defined in the SD library if building with SD support #define SCK_PIN 9 @@ -104,11 +98,6 @@ #define EXT_AUX_A4_IO 44 // Digital IO, 42 (teensy), 44 (marlin) -#define SDPOWER -1 -#define LED_PIN -1 -#define PS_ON_PIN -1 -#define SD_DETECT_PIN -1 - #define BEEPER_PIN -1 #define LCD_PINS_RS -1 #define LCD_PINS_ENABLE -1 diff --git a/Marlin/pins_SETHI.h b/Marlin/pins_SETHI.h index e16b45cea..531ac07ef 100644 --- a/Marlin/pins_SETHI.h +++ b/Marlin/pins_SETHI.h @@ -57,20 +57,11 @@ #define E0_ENABLE_PIN 24 #define TEMP_0_PIN 1 -#define TEMP_1_PIN -1 -#define TEMP_2_PIN -1 #define TEMP_BED_PIN 2 #define HEATER_0_PIN 4 -#define HEATER_1_PIN -1 -#define HEATER_2_PIN -1 #define HEATER_BED_PIN 3 -#define KILL_PIN -1 - -#define SDPOWER -1 -#define SDSS -1 // SCL pin of I2C header -#define LED_PIN -1 #if (GEN7_VERSION >= 13) // Gen7 v1.3 removed the fan pin diff --git a/Marlin/pins_TEENSY2.h b/Marlin/pins_TEENSY2.h index eb27ae97d..8335af0e2 100644 --- a/Marlin/pins_TEENSY2.h +++ b/Marlin/pins_TEENSY2.h @@ -93,8 +93,6 @@ #define E0_ENABLE_PIN 26 // Shared w/x #define HEATER_0_PIN 15 // 21 // Extruder -#define HEATER_1_PIN -1 -#define HEATER_2_PIN -1 #define HEATER_BED_PIN 14 // 20 // Bed #define FAN_PIN 16 // 22 // Fan @@ -104,15 +102,10 @@ #define TEMP_0_PIN 7 // Extruder / Analog pin numbering #define TEMP_BED_PIN 6 // Bed / Analog pin numbering -#define TEMP_1_PIN -1 -#define TEMP_2_PIN -1 -#define SDPOWER -1 -#define SD_DETECT_PIN -1 #define SDSS 20 // 8 #define LED_PIN 6 #define PS_ON_PIN 27 -#define KILL_PIN -1 #if DISABLED(SDSUPPORT) // these pins are defined in the SD library if building with SD support diff --git a/Marlin/pins_TEENSYLU.h b/Marlin/pins_TEENSYLU.h index ea1492429..16c23c955 100644 --- a/Marlin/pins_TEENSYLU.h +++ b/Marlin/pins_TEENSYLU.h @@ -72,14 +72,7 @@ #define TEMP_0_PIN 7 // Extruder / Analog pin numbering #define TEMP_BED_PIN 6 // Bed / Analog pin numbering -#define TEMP_1_PIN -1 -#define TEMP_2_PIN -1 - -#define SDPOWER -1 #define SDSS 8 -#define LED_PIN -1 -#define PS_ON_PIN -1 -#define KILL_PIN -1 #if DISABLED(SDSUPPORT) // these pins are defined in the SD library if building with SD support diff --git a/Marlin/pins_ULTIMAIN_2.h b/Marlin/pins_ULTIMAIN_2.h index 8682a54fc..33f63f11c 100644 --- a/Marlin/pins_ULTIMAIN_2.h +++ b/Marlin/pins_ULTIMAIN_2.h @@ -55,9 +55,6 @@ #define HEATER_1_PIN 3 #define TEMP_1_PIN 9 -#define HEATER_2_PIN -1 -#define TEMP_2_PIN -1 - #define E0_STEP_PIN 42 #define E0_DIR_PIN 43 #define E0_ENABLE_PIN 37 @@ -66,13 +63,9 @@ #define E1_DIR_PIN 47 #define E1_ENABLE_PIN 48 -#define SDPOWER -1 #define SDSS 53 #define LED_PIN 8 #define FAN_PIN 7 -#define PS_ON_PIN -1 -#define KILL_PIN -1 -#define SUICIDE_PIN -1 //PIN that has to be turned on right after start, to keep power flowing. #define SAFETY_TRIGGERED_PIN 28 //PIN to detect the safety circuit has triggered #define MAIN_VOLTAGE_MEASURE_PIN 14 //Analogue PIN to measure the main voltage, with a 100k - 4k7 resitor divider. diff --git a/Marlin/pins_ULTIMAKER.h b/Marlin/pins_ULTIMAKER.h index ab7a5da83..ef0b0237e 100644 --- a/Marlin/pins_ULTIMAKER.h +++ b/Marlin/pins_ULTIMAKER.h @@ -62,9 +62,6 @@ #define HEATER_1_PIN 3 #define TEMP_1_PIN 9 -#define HEATER_2_PIN -1 -#define TEMP_2_PIN -1 - #define E0_STEP_PIN 43 #define E0_DIR_PIN 45 #define E0_ENABLE_PIN 41 @@ -73,12 +70,10 @@ #define E1_DIR_PIN 47 #define E1_ENABLE_PIN 48 -#define SDPOWER -1 #define SDSS 53 #define LED_PIN 13 #define FAN_PIN 7 #define PS_ON_PIN 12 -#define KILL_PIN -1 #define SUICIDE_PIN 54 //PIN that has to be turned on right after start, to keep power flowing. #if ENABLED(ULTRA_LCD) diff --git a/Marlin/pins_ULTIMAKER_OLD.h b/Marlin/pins_ULTIMAKER_OLD.h index e2d48e67d..a3c9ee76f 100644 --- a/Marlin/pins_ULTIMAKER_OLD.h +++ b/Marlin/pins_ULTIMAKER_OLD.h @@ -51,17 +51,11 @@ #define Z_MAX_PIN 18 #define Z_ENABLE_PIN 35 -#define HEATER_BED_PIN -1 -#define TEMP_BED_PIN -1 - -#define HEATER_0_PIN 2 #define TEMP_0_PIN 8 - -#define HEATER_1_PIN 1 #define TEMP_1_PIN 1 -#define HEATER_2_PIN -1 -#define TEMP_2_PIN -1 +#define HEATER_0_PIN 2 +#define HEATER_1_PIN 1 #define E0_STEP_PIN 43 #define E0_DIR_PIN 45 @@ -71,14 +65,6 @@ #define E1_DIR_PIN -1 #define E1_ENABLE_PIN -1 -#define SDPOWER -1 -#define SDSS -1 -#define LED_PIN -1 -#define FAN_PIN -1 -#define PS_ON_PIN -1 -#define KILL_PIN -1 -#define SUICIDE_PIN -1 //PIN that has to be turned on right after start, to keep power flowing. - #define LCD_PINS_RS 24 #define LCD_PINS_ENABLE 22 #define LCD_PINS_D4 36