Comment spacing

This commit is contained in:
Scott Lahteine 2019-08-02 02:17:40 -05:00
parent 7682751646
commit 5e2582a31b
5 changed files with 23 additions and 23 deletions

View file

@ -68,7 +68,7 @@ static uint16_t EE_VerifyPageFullWriteVariable(uint16_t VirtAddress, uint16_t Da
static uint16_t EE_PageTransfer(uint16_t VirtAddress, uint16_t Data);
static uint16_t EE_VerifyPageFullyErased(uint32_t Address);
/**
/**
* @brief Restore the pages to a known good state in case of page's status
* corruption after a power loss.
* @param None.

View file

@ -28,7 +28,7 @@ extern "C" {
/* Exported constants --------------------------------------------------------*/
/* ########################## Module Selection ############################## */
/**
/**
* @brief This is the list of modules to be used in the HAL driver
*/
#define HAL_MODULE_ENABLED
@ -82,7 +82,7 @@ extern "C" {
/* #define HAL_MMC_MODULE_ENABLED */
/* ########################## HSE/HSI Values adaptation ##################### */
/**
/**
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
* This value is used by the RCC HAL module to compute the system frequency
* (when HSE is used as system clock source, directly or through the PLL).
@ -95,7 +95,7 @@ extern "C" {
#define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */
#endif /* HSE_STARTUP_TIMEOUT */
/**
/**
* @brief Internal High Speed oscillator (HSI) value.
* This value is used by the RCC HAL module to compute the system frequency
* (when HSI is used as system clock source, directly or through the PLL).
@ -104,7 +104,7 @@ extern "C" {
#define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
#endif /* HSI_VALUE */
/**
/**
* @brief Internal Low Speed oscillator (LSI) value.
*/
#if !defined (LSI_VALUE)
@ -112,7 +112,7 @@ extern "C" {
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
The real value may vary depending on the variations
in voltage and temperature.*/
/**
/**
* @brief External Low Speed oscillator (LSE) value.
*/
#if !defined (LSE_VALUE)
@ -123,7 +123,7 @@ in voltage and temperature.*/
#define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */
#endif /* LSE_STARTUP_TIMEOUT */
/**
/**
* @brief External clock source for I2S peripheral
* This value is used by the I2S HAL module to compute the I2S clock source
* frequency, this source is inserted directly through I2S_CKIN pad.
@ -136,7 +136,7 @@ in voltage and temperature.*/
=== you can define the HSE value in your toolchain compiler preprocessor. */
/* ########################### System Configuration ######################### */
/**
/**
* @brief This is the HAL system configuration section
*/
#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */
@ -186,7 +186,7 @@ in voltage and temperature.*/
#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */
/* ########################## Assert Selection ############################## */
/**
/**
* @brief Uncomment the line below to expanse the "assert_param" macro in the
* HAL drivers code
*/
@ -258,7 +258,7 @@ in voltage and temperature.*/
#define USE_SPI_CRC 0U
/* Includes ------------------------------------------------------------------*/
/**
/**
* @brief Include module's header file
*/
@ -456,7 +456,7 @@ in voltage and temperature.*/
/* Exported macro ------------------------------------------------------------*/
#ifdef USE_FULL_ASSERT
/**
/**
* @brief The assert_param macro is used for function's parameters check.
* @param expr: If expr is false, it calls assert_failed function
* which reports the name of the source file and the source

View file

@ -226,7 +226,7 @@ const PinName digitalPin[] = {
extern "C" {
#endif
/**
/**
* @brief System Clock Configuration
* @param None
* @retval None

View file

@ -28,7 +28,7 @@ extern "C" {
/* Exported constants --------------------------------------------------------*/
/* ########################## Module Selection ############################## */
/**
/**
* @brief This is the list of modules to be used in the HAL driver
*/
#define HAL_MODULE_ENABLED
@ -82,7 +82,7 @@ extern "C" {
/* #define HAL_MMC_MODULE_ENABLED */
/* ########################## HSE/HSI Values adaptation ##################### */
/**
/**
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
* This value is used by the RCC HAL module to compute the system frequency
* (when HSE is used as system clock source, directly or through the PLL).
@ -95,7 +95,7 @@ extern "C" {
#define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */
#endif /* HSE_STARTUP_TIMEOUT */
/**
/**
* @brief Internal High Speed oscillator (HSI) value.
* This value is used by the RCC HAL module to compute the system frequency
* (when HSI is used as system clock source, directly or through the PLL).
@ -104,7 +104,7 @@ extern "C" {
#define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
#endif /* HSI_VALUE */
/**
/**
* @brief Internal Low Speed oscillator (LSI) value.
*/
#if !defined (LSI_VALUE)
@ -112,7 +112,7 @@ extern "C" {
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
The real value may vary depending on the variations
in voltage and temperature.*/
/**
/**
* @brief External Low Speed oscillator (LSE) value.
*/
#if !defined (LSE_VALUE)
@ -123,7 +123,7 @@ in voltage and temperature.*/
#define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */
#endif /* LSE_STARTUP_TIMEOUT */
/**
/**
* @brief External clock source for I2S peripheral
* This value is used by the I2S HAL module to compute the I2S clock source
* frequency, this source is inserted directly through I2S_CKIN pad.
@ -136,7 +136,7 @@ in voltage and temperature.*/
=== you can define the HSE value in your toolchain compiler preprocessor. */
/* ########################### System Configuration ######################### */
/**
/**
* @brief This is the HAL system configuration section
*/
#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */
@ -186,7 +186,7 @@ in voltage and temperature.*/
#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */
/* ########################## Assert Selection ############################## */
/**
/**
* @brief Uncomment the line below to expanse the "assert_param" macro in the
* HAL drivers code
*/
@ -258,7 +258,7 @@ in voltage and temperature.*/
#define USE_SPI_CRC 0U
/* Includes ------------------------------------------------------------------*/
/**
/**
* @brief Include module's header file
*/
@ -456,7 +456,7 @@ in voltage and temperature.*/
/* Exported macro ------------------------------------------------------------*/
#ifdef USE_FULL_ASSERT
/**
/**
* @brief The assert_param macro is used for function's parameters check.
* @param expr: If expr is false, it calls assert_failed function
* which reports the name of the source file and the source

View file

@ -104,7 +104,7 @@ const PinName digitalPin[] = {
extern "C" {
#endif
/**
/**
* @brief System Clock Configuration
* @param None
* @retval None