EEPROM Checksum
This commit is contained in:
Scott Lahteine
parent
bf216bd78f
commit
5e370006fc
1 changed files with 91 additions and 67 deletions
|
|
@ -36,88 +36,89 @@
|
|||
*
|
||||
*/
|
||||
|
||||
#define EEPROM_VERSION "V23"
|
||||
#define EEPROM_VERSION "V24"
|
||||
|
||||
/**
|
||||
* V23 EEPROM Layout:
|
||||
* V24 EEPROM Layout:
|
||||
*
|
||||
* 100 Version (char x4)
|
||||
* 104 EEPROM Checksum (uint16_t)
|
||||
*
|
||||
* 104 M92 XYZE planner.axis_steps_per_mm (float x4)
|
||||
* 120 M203 XYZE planner.max_feedrate (float x4)
|
||||
* 136 M201 XYZE planner.max_acceleration_mm_per_s2 (uint32_t x4)
|
||||
* 152 M204 P planner.acceleration (float)
|
||||
* 156 M204 R planner.retract_acceleration (float)
|
||||
* 160 M204 T planner.travel_acceleration (float)
|
||||
* 164 M205 S planner.min_feedrate (float)
|
||||
* 168 M205 T planner.min_travel_feedrate (float)
|
||||
* 172 M205 B planner.min_segment_time (ulong)
|
||||
* 176 M205 X planner.max_xy_jerk (float)
|
||||
* 180 M205 Z planner.max_z_jerk (float)
|
||||
* 184 M205 E planner.max_e_jerk (float)
|
||||
* 188 M206 XYZ home_offset (float x3)
|
||||
* 106 M92 XYZE planner.axis_steps_per_mm (float x4)
|
||||
* 122 M203 XYZE planner.max_feedrate (float x4)
|
||||
* 138 M201 XYZE planner.max_acceleration_mm_per_s2 (uint32_t x4)
|
||||
* 154 M204 P planner.acceleration (float)
|
||||
* 158 M204 R planner.retract_acceleration (float)
|
||||
* 162 M204 T planner.travel_acceleration (float)
|
||||
* 166 M205 S planner.min_feedrate (float)
|
||||
* 170 M205 T planner.min_travel_feedrate (float)
|
||||
* 174 M205 B planner.min_segment_time (ulong)
|
||||
* 178 M205 X planner.max_xy_jerk (float)
|
||||
* 182 M205 Z planner.max_z_jerk (float)
|
||||
* 186 M205 E planner.max_e_jerk (float)
|
||||
* 190 M206 XYZ home_offset (float x3)
|
||||
*
|
||||
* Mesh bed leveling:
|
||||
* 200 M420 S status (uint8)
|
||||
* 201 z_offset (float)
|
||||
* 205 mesh_num_x (uint8 as set in firmware)
|
||||
* 206 mesh_num_y (uint8 as set in firmware)
|
||||
* 207 G29 S3 XYZ z_values[][] (float x9, by default)
|
||||
* 202 M420 S status (uint8)
|
||||
* 203 z_offset (float)
|
||||
* 207 mesh_num_x (uint8 as set in firmware)
|
||||
* 208 mesh_num_y (uint8 as set in firmware)
|
||||
* 209 G29 S3 XYZ z_values[][] (float x9, by default)
|
||||
*
|
||||
* AUTO BED LEVELING
|
||||
* 243 M851 zprobe_zoffset (float)
|
||||
* 245 M851 zprobe_zoffset (float)
|
||||
*
|
||||
* DELTA:
|
||||
* 247 M666 XYZ endstop_adj (float x3)
|
||||
* 259 M665 R delta_radius (float)
|
||||
* 263 M665 L delta_diagonal_rod (float)
|
||||
* 267 M665 S delta_segments_per_second (float)
|
||||
* 271 M665 A delta_diagonal_rod_trim_tower_1 (float)
|
||||
* 275 M665 B delta_diagonal_rod_trim_tower_2 (float)
|
||||
* 279 M665 C delta_diagonal_rod_trim_tower_3 (float)
|
||||
* 249 M666 XYZ endstop_adj (float x3)
|
||||
* 261 M665 R delta_radius (float)
|
||||
* 265 M665 L delta_diagonal_rod (float)
|
||||
* 269 M665 S delta_segments_per_second (float)
|
||||
* 273 M665 A delta_diagonal_rod_trim_tower_1 (float)
|
||||
* 277 M665 B delta_diagonal_rod_trim_tower_2 (float)
|
||||
* 281 M665 C delta_diagonal_rod_trim_tower_3 (float)
|
||||
*
|
||||
* Z_DUAL_ENDSTOPS:
|
||||
* 283 M666 Z z_endstop_adj (float)
|
||||
* 285 M666 Z z_endstop_adj (float)
|
||||
*
|
||||
* ULTIPANEL:
|
||||
* 287 M145 S0 H plaPreheatHotendTemp (int)
|
||||
* 289 M145 S0 B plaPreheatHPBTemp (int)
|
||||
* 291 M145 S0 F plaPreheatFanSpeed (int)
|
||||
* 293 M145 S1 H absPreheatHotendTemp (int)
|
||||
* 295 M145 S1 B absPreheatHPBTemp (int)
|
||||
* 297 M145 S1 F absPreheatFanSpeed (int)
|
||||
* 289 M145 S0 H plaPreheatHotendTemp (int)
|
||||
* 291 M145 S0 B plaPreheatHPBTemp (int)
|
||||
* 293 M145 S0 F plaPreheatFanSpeed (int)
|
||||
* 295 M145 S1 H absPreheatHotendTemp (int)
|
||||
* 297 M145 S1 B absPreheatHPBTemp (int)
|
||||
* 299 M145 S1 F absPreheatFanSpeed (int)
|
||||
*
|
||||
* PIDTEMP:
|
||||
* 299 M301 E0 PIDC Kp[0], Ki[0], Kd[0], Kc[0] (float x4)
|
||||
* 315 M301 E1 PIDC Kp[1], Ki[1], Kd[1], Kc[1] (float x4)
|
||||
* 331 M301 E2 PIDC Kp[2], Ki[2], Kd[2], Kc[2] (float x4)
|
||||
* 347 M301 E3 PIDC Kp[3], Ki[3], Kd[3], Kc[3] (float x4)
|
||||
* 363 M301 L lpq_len (int)
|
||||
* 301 M301 E0 PIDC Kp[0], Ki[0], Kd[0], Kc[0] (float x4)
|
||||
* 317 M301 E1 PIDC Kp[1], Ki[1], Kd[1], Kc[1] (float x4)
|
||||
* 333 M301 E2 PIDC Kp[2], Ki[2], Kd[2], Kc[2] (float x4)
|
||||
* 349 M301 E3 PIDC Kp[3], Ki[3], Kd[3], Kc[3] (float x4)
|
||||
* 365 M301 L lpq_len (int)
|
||||
*
|
||||
* PIDTEMPBED:
|
||||
* 365 M304 PID thermalManager.bedKp, thermalManager.bedKi, thermalManager.bedKd (float x3)
|
||||
* 367 M304 PID thermalManager.bedKp, thermalManager.bedKi, thermalManager.bedKd (float x3)
|
||||
*
|
||||
* DOGLCD:
|
||||
* 377 M250 C lcd_contrast (int)
|
||||
* 379 M250 C lcd_contrast (int)
|
||||
*
|
||||
* SCARA:
|
||||
* 379 M365 XYZ axis_scaling (float x3)
|
||||
* 381 M365 XYZ axis_scaling (float x3)
|
||||
*
|
||||
* FWRETRACT:
|
||||
* 391 M209 S autoretract_enabled (bool)
|
||||
* 392 M207 S retract_length (float)
|
||||
* 396 M207 W retract_length_swap (float)
|
||||
* 400 M207 F retract_feedrate_mm_s (float)
|
||||
* 404 M207 Z retract_zlift (float)
|
||||
* 408 M208 S retract_recover_length (float)
|
||||
* 412 M208 W retract_recover_length_swap (float)
|
||||
* 416 M208 F retract_recover_feedrate (float)
|
||||
* 393 M209 S autoretract_enabled (bool)
|
||||
* 394 M207 S retract_length (float)
|
||||
* 398 M207 W retract_length_swap (float)
|
||||
* 402 M207 F retract_feedrate_mm_s (float)
|
||||
* 406 M207 Z retract_zlift (float)
|
||||
* 410 M208 S retract_recover_length (float)
|
||||
* 414 M208 W retract_recover_length_swap (float)
|
||||
* 418 M208 F retract_recover_feedrate (float)
|
||||
*
|
||||
* Volumetric Extrusion:
|
||||
* 420 M200 D volumetric_enabled (bool)
|
||||
* 421 M200 T D filament_size (float x4) (T0..3)
|
||||
* 422 M200 D volumetric_enabled (bool)
|
||||
* 423 M200 T D filament_size (float x4) (T0..3)
|
||||
*
|
||||
* 437 This Slot is Available!
|
||||
* 439 This Slot is Available!
|
||||
*
|
||||
*/
|
||||
#include "Marlin.h"
|
||||
|
|
@ -131,6 +132,9 @@
|
|||
#include "mesh_bed_leveling.h"
|
||||
#endif
|
||||
|
||||
uint16_t eeprom_checksum;
|
||||
const char version[4] = EEPROM_VERSION;
|
||||
|
||||
void _EEPROM_writeData(int &pos, uint8_t* value, uint8_t size) {
|
||||
uint8_t c;
|
||||
while (size--) {
|
||||
|
|
@ -140,13 +144,16 @@ void _EEPROM_writeData(int &pos, uint8_t* value, uint8_t size) {
|
|||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHOLNPGM(MSG_ERR_EEPROM_WRITE);
|
||||
}
|
||||
eeprom_checksum += c;
|
||||
pos++;
|
||||
value++;
|
||||
};
|
||||
}
|
||||
void _EEPROM_readData(int &pos, uint8_t* value, uint8_t size) {
|
||||
do {
|
||||
*value = eeprom_read_byte((unsigned char*)pos);
|
||||
uint8_t c = eeprom_read_byte((unsigned char*)pos);
|
||||
*value = c;
|
||||
eeprom_checksum += c;
|
||||
pos++;
|
||||
value++;
|
||||
} while (--size);
|
||||
|
|
@ -172,7 +179,12 @@ void Config_StoreSettings() {
|
|||
float dummy = 0.0f;
|
||||
char ver[4] = "000";
|
||||
int i = EEPROM_OFFSET;
|
||||
EEPROM_WRITE_VAR(i, ver); // invalidate data first
|
||||
|
||||
EEPROM_WRITE_VAR(i, ver); // invalidate data first
|
||||
i += sizeof(eeprom_checksum); // Skip the checksum slot
|
||||
|
||||
eeprom_checksum = 0; // clear before first "real data"
|
||||
|
||||
EEPROM_WRITE_VAR(i, planner.axis_steps_per_mm);
|
||||
EEPROM_WRITE_VAR(i, planner.max_feedrate);
|
||||
EEPROM_WRITE_VAR(i, planner.max_acceleration_mm_per_s2);
|
||||
|
|
@ -324,9 +336,11 @@ void Config_StoreSettings() {
|
|||
EEPROM_WRITE_VAR(i, dummy);
|
||||
}
|
||||
|
||||
char ver2[4] = EEPROM_VERSION;
|
||||
uint16_t final_checksum = eeprom_checksum;
|
||||
|
||||
int j = EEPROM_OFFSET;
|
||||
EEPROM_WRITE_VAR(j, ver2); // validate data
|
||||
EEPROM_WRITE_VAR(j, version);
|
||||
EEPROM_WRITE_VAR(j, final_checksum);
|
||||
|
||||
// Report storage size
|
||||
SERIAL_ECHO_START;
|
||||
|
|
@ -342,18 +356,21 @@ void Config_RetrieveSettings() {
|
|||
|
||||
int i = EEPROM_OFFSET;
|
||||
char stored_ver[4];
|
||||
char ver[4] = EEPROM_VERSION;
|
||||
EEPROM_READ_VAR(i, stored_ver); //read stored version
|
||||
uint16_t stored_checksum;
|
||||
EEPROM_READ_VAR(i, stored_ver);
|
||||
EEPROM_READ_VAR(i, stored_checksum);
|
||||
// SERIAL_ECHOPAIR("Version: [", ver);
|
||||
// SERIAL_ECHOPAIR("] Stored version: [", stored_ver);
|
||||
// SERIAL_ECHOLNPGM("]");
|
||||
|
||||
if (strncmp(ver, stored_ver, 3) != 0) {
|
||||
if (strncmp(version, stored_ver, 3) != 0) {
|
||||
Config_ResetDefault();
|
||||
}
|
||||
else {
|
||||
float dummy = 0;
|
||||
|
||||
eeprom_checksum = 0; // clear before reading first "real data"
|
||||
|
||||
// version number match
|
||||
EEPROM_READ_VAR(i, planner.axis_steps_per_mm);
|
||||
EEPROM_READ_VAR(i, planner.max_feedrate);
|
||||
|
|
@ -506,12 +523,19 @@ void Config_RetrieveSettings() {
|
|||
// Call thermalManager.updatePID (similar to when we have processed M301)
|
||||
thermalManager.updatePID();
|
||||
|
||||
// Report settings retrieved and length
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHO(ver);
|
||||
SERIAL_ECHOPAIR(" stored settings retrieved (", i);
|
||||
SERIAL_ECHOLNPGM(" bytes)");
|
||||
}
|
||||
if (eeprom_checksum == stored_checksum) {
|
||||
Config_Postprocess();
|
||||
SERIAL_ECHO_START;
|
||||
SERIAL_ECHO(version);
|
||||
SERIAL_ECHOPAIR(" stored settings retrieved (", i);
|
||||
SERIAL_ECHOLNPGM(" bytes)");
|
||||
}
|
||||
else {
|
||||
SERIAL_ERROR_START;
|
||||
SERIAL_ERRORLNPGM("EEPROM checksum mismatch");
|
||||
Config_ResetDefault();
|
||||
}
|
||||
}
|
||||
|
||||
#if ENABLED(EEPROM_CHITCHAT)
|
||||
Config_PrintSettings();
|
||||
|
|
|
|||
Reference in a new issue