Merge pull request #4202 from thinkyhead/rc_fix_gcode_t_position

Fix position adjustment with gcode_T and MBL
This commit is contained in:
Scott Lahteine 2016-07-03 17:55:43 -07:00 committed by GitHub
commit 60865fc45b

View file

@ -310,6 +310,9 @@ float position_shift[3] = { 0 };
// Set by M206, M428, or menu item. Saved to EEPROM.
float home_offset[3] = { 0 };
#define RAW_POSITION(POS, AXIS) (POS - home_offset[AXIS] - position_shift[AXIS])
#define RAW_CURRENT_POSITION(AXIS) (RAW_POSITION(current_position[AXIS], AXIS))
// Software Endstops. Default to configured limits.
float sw_endstop_min[3] = { X_MIN_POS, Y_MIN_POS, Z_MIN_POS };
float sw_endstop_max[3] = { X_MAX_POS, Y_MAX_POS, Z_MAX_POS };
@ -2766,8 +2769,7 @@ inline void gcode_G28() {
// Save known Z position if already homed
if (axis_homed[X_AXIS] && axis_homed[Y_AXIS] && axis_homed[Z_AXIS]) {
pre_home_z = current_position[Z_AXIS];
pre_home_z += mbl.get_z(current_position[X_AXIS] - home_offset[X_AXIS],
current_position[Y_AXIS] - home_offset[Y_AXIS]);
pre_home_z += mbl.get_z(RAW_CURRENT_POSITION(X_AXIS), RAW_CURRENT_POSITION(Y_AXIS));
}
mbl.set_active(false);
current_position[Z_AXIS] = pre_home_z;
@ -3083,8 +3085,7 @@ inline void gcode_G28() {
stepper.synchronize();
#else
current_position[Z_AXIS] = MESH_HOME_SEARCH_Z -
mbl.get_z(current_position[X_AXIS] - home_offset[X_AXIS],
current_position[Y_AXIS] - home_offset[Y_AXIS])
mbl.get_z(RAW_CURRENT_POSITION(X_AXIS), RAW_CURRENT_POSITION(Y_AXIS))
#if Z_HOME_DIR > 0
+ Z_MAX_POS
#endif
@ -3096,8 +3097,7 @@ inline void gcode_G28() {
SYNC_PLAN_POSITION_KINEMATIC();
mbl.set_active(true);
current_position[Z_AXIS] = pre_home_z -
mbl.get_z(current_position[X_AXIS] - home_offset[X_AXIS],
current_position[Y_AXIS] - home_offset[Y_AXIS]);
mbl.get_z(RAW_CURRENT_POSITION(X_AXIS), RAW_CURRENT_POSITION(Y_AXIS));
}
}
#endif
@ -3305,8 +3305,7 @@ inline void gcode_G28() {
case MeshReset:
if (mbl.active()) {
current_position[Z_AXIS] +=
mbl.get_z(current_position[X_AXIS] - home_offset[X_AXIS],
current_position[Y_AXIS] - home_offset[Y_AXIS]) - MESH_HOME_SEARCH_Z;
mbl.get_z(RAW_CURRENT_POSITION(X_AXIS), RAW_CURRENT_POSITION(Y_AXIS)) - MESH_HOME_SEARCH_Z;
mbl.reset();
SYNC_PLAN_POSITION_KINEMATIC();
}
@ -6620,21 +6619,23 @@ inline void gcode_T(uint8_t tmp_extruder) {
}
#endif
#elif ENABLED(MESH_BED_LEVELING)
#else // !AUTO_BED_LEVELING_FEATURE
#if ENABLED(MESH_BED_LEVELING)
if (mbl.active()) {
float xpos = current_position[X_AXIS] - home_offset[X_AXIS],
ypos = current_position[Y_AXIS] - home_offset[Y_AXIS];
float xpos = RAW_CURRENT_POSITION(X_AXIS),
ypos = RAW_CURRENT_POSITION(Y_AXIS);
current_position[Z_AXIS] += mbl.get_z(xpos + xydiff[X_AXIS], ypos + xydiff[Y_AXIS]) - mbl.get_z(xpos, ypos);
}
#else // no bed leveling
#endif // MESH_BED_LEVELING
// The newly-selected extruder XY is actually at...
current_position[X_AXIS] += xydiff[X_AXIS];
current_position[Y_AXIS] += xydiff[Y_AXIS];
#endif // no bed leveling
#endif // !AUTO_BED_LEVELING_FEATURE
for (uint8_t i = X_AXIS; i <= Y_AXIS; i++) {
position_shift[i] += xydiff[i];
@ -7476,10 +7477,10 @@ void mesh_buffer_line(float x, float y, float z, const float e, float feed_rate,
set_current_to_destination();
return;
}
int pcx = mbl.cell_index_x(current_position[X_AXIS] - home_offset[X_AXIS]);
int pcy = mbl.cell_index_y(current_position[Y_AXIS] - home_offset[Y_AXIS]);
int cx = mbl.cell_index_x(x - home_offset[X_AXIS]);
int cy = mbl.cell_index_y(y - home_offset[Y_AXIS]);
int pcx = mbl.cell_index_x(RAW_CURRENT_POSITION(X_AXIS)),
pcy = mbl.cell_index_y(RAW_CURRENT_POSITION(Y_AXIS)),
cx = mbl.cell_index_x(RAW_POSITION(x, X_AXIS)),
cy = mbl.cell_index_y(RAW_POSITION(x, Y_AXIS));
NOMORE(pcx, MESH_NUM_X_POINTS - 2);
NOMORE(pcy, MESH_NUM_Y_POINTS - 2);
NOMORE(cx, MESH_NUM_X_POINTS - 2);