Combine more tool-change variables (#12137)

This commit is contained in:
InsanityAutomation 2018-11-06 22:52:20 -05:00 committed by Scott Lahteine
parent 147e270208
commit 6471a75a22
143 changed files with 1827 additions and 1382 deletions

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -945,9 +934,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 200
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1095,6 +1095,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -945,9 +934,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 200
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1095,6 +1095,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -965,9 +954,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 250
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1094,6 +1094,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -945,9 +934,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 260
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -945,9 +934,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 200
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1094,6 +1094,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -945,9 +934,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 200
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1094,6 +1094,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -1060,9 +1049,6 @@
#define X_MAX_POS X_BED_SIZE
#define Y_MAX_POS Y_BED_SIZE
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1093,6 +1093,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -155,17 +155,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -952,9 +941,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 240
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1094,6 +1094,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -946,9 +946,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 200
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1023,6 +1023,15 @@
// @section extras
/**
* Extra Fan Speed
* Adds a secondary fan speed for each print-cooling fan.
* 'M106 P<fan> T3-255' : Set a secondary speed for <fan>
* 'M106 P<fan> T2' : Use the set secondary speed
* 'M106 P<fan> T1' : Restore the previous fan speed
*/
//#define EXTRA_FAN_SPEED
/**
* Firmware-based and LCD-controlled retract
*
@ -1059,13 +1068,31 @@
#endif
/**
* Extra Fan Speed
* Adds a secondary fan speed for each print-cooling fan.
* 'M106 P<fan> T3-255' : Set a secondary speed for <fan>
* 'M106 P<fan> T2' : Use the set secondary speed
* 'M106 P<fan> T1' : Restore the previous fan speed
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
//#define EXTRA_FAN_SPEED
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -945,9 +934,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 200
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -945,9 +934,6 @@
#define Y_MAX_POS 186
#define Z_MAX_POS 186
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1093,6 +1093,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -945,9 +934,6 @@
#define Y_MAX_POS 93
#define Z_MAX_POS 186
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1094,6 +1094,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -933,9 +922,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 180
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1094,6 +1094,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -162,17 +162,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -946,9 +935,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 210
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1102,6 +1102,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -933,9 +922,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 200
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1094,6 +1094,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -155,17 +155,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -944,9 +933,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 400
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1094,6 +1094,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -955,9 +944,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 400
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1094,6 +1094,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -945,9 +934,6 @@
#define Y_MAX_POS 306 // 4mm Extra space behind the bed
#define Z_MAX_POS 400
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1094,6 +1094,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -163,17 +163,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -964,9 +953,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 300
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1094,6 +1094,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -955,9 +944,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 310
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1094,6 +1094,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -949,9 +938,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 200
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1094,6 +1094,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -949,9 +938,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 250
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1094,6 +1094,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -955,9 +944,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 310
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1094,6 +1094,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -955,9 +944,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 165
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1094,6 +1094,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -927,9 +916,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 235
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1094,6 +1094,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -927,9 +916,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 235
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -951,9 +940,6 @@
#define Y_MAX_POS 182
#define Z_MAX_POS 175
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1094,6 +1094,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -195,17 +195,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -1041,9 +1030,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 500
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1096,6 +1096,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -157,17 +157,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -987,9 +976,6 @@
#define Z_MAX_POS 500
#endif
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1098,6 +1098,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -158,17 +158,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -970,9 +959,6 @@
#define Z_MAX_POS 500
#endif
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1099,6 +1099,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -960,9 +949,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 200
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -945,9 +934,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 170
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -952,9 +941,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 162
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1095,6 +1095,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -961,9 +950,6 @@
#define Y_MAX_POS (-Y_MIN_POS+Y_BED_SIZE)
#define Z_MAX_POS 200
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -960,9 +949,6 @@
#define Y_MAX_POS (-Y_MIN_POS+Y_BED_SIZE)
#define Z_MAX_POS 200
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -945,9 +934,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 180
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1094,6 +1094,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -945,9 +934,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 180
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1094,6 +1094,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -949,9 +938,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 185
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1094,6 +1094,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -159,17 +159,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -957,9 +946,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 320
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1094,6 +1094,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -174,17 +174,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -965,9 +954,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 200
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1094,6 +1094,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -159,17 +159,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -969,9 +958,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 180
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1094,6 +1094,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -944,9 +933,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 200
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1094,6 +1094,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -949,9 +938,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 260
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -949,9 +938,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 260
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1094,6 +1094,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -945,9 +934,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 200
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1102,6 +1102,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -994,9 +983,6 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 80
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -945,9 +934,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 200
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -157,17 +157,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -943,9 +932,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 254 // RigidBot regular and Big are 254mm
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1094,6 +1094,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -185,17 +185,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -958,9 +947,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 225
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1094,6 +1094,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -947,9 +936,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 180
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -945,9 +934,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 200
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -976,9 +965,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 170
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1094,6 +1094,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -945,9 +934,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 200
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1094,6 +1094,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -176,17 +176,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -1001,9 +990,6 @@
#define Z_MAX_POS 158
#endif
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1094,6 +1094,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -945,9 +934,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 150
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -949,9 +938,6 @@
#define Y_MAX_POS Y_BED_SIZE - (TRONXY_Y_BED_OFFSET + 5)
#define Z_MAX_POS 316
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1094,6 +1094,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -945,9 +934,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 400
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -956,9 +945,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 130
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -945,9 +934,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 200
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1094,6 +1094,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -174,17 +174,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -975,9 +964,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 200
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1107,6 +1107,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -945,9 +934,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 190
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1094,6 +1094,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -945,9 +934,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 190
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -955,9 +944,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 170
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1096,6 +1096,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -945,9 +934,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 200
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -169,17 +169,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -1133,9 +1122,6 @@
#define Y_MAX_POS DELTA_PRINTABLE_RADIUS
#define Z_MAX_POS MANUAL_Z_HOME_POS
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1096,6 +1096,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -1073,9 +1062,6 @@
#define Y_MAX_POS DELTA_PRINTABLE_RADIUS
#define Z_MAX_POS MANUAL_Z_HOME_POS
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1096,6 +1096,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -1072,9 +1061,6 @@
#define Y_MAX_POS DELTA_PRINTABLE_RADIUS
#define Z_MAX_POS MANUAL_Z_HOME_POS
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1096,6 +1096,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -1072,9 +1061,6 @@
#define Y_MAX_POS DELTA_PRINTABLE_RADIUS
#define Z_MAX_POS MANUAL_Z_HOME_POS
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1096,6 +1096,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -159,17 +159,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -1075,9 +1064,6 @@
#define Y_MAX_POS DELTA_PRINTABLE_RADIUS
#define Z_MAX_POS MANUAL_Z_HOME_POS
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -1060,9 +1049,6 @@
#define Y_MAX_POS DELTA_PRINTABLE_RADIUS
#define Z_MAX_POS MANUAL_Z_HOME_POS
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1096,6 +1096,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -1062,9 +1051,6 @@
#define Y_MAX_POS DELTA_PRINTABLE_RADIUS
#define Z_MAX_POS MANUAL_Z_HOME_POS
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1096,6 +1096,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -158,17 +158,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -1063,9 +1052,6 @@
#define Y_MAX_POS DELTA_PRINTABLE_RADIUS
#define Z_MAX_POS MANUAL_Z_HOME_POS
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -1063,9 +1052,6 @@
#define Y_MAX_POS DELTA_PRINTABLE_RADIUS
#define Z_MAX_POS MANUAL_Z_HOME_POS
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1096,6 +1096,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -159,17 +159,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -959,9 +948,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 500
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1094,6 +1094,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -948,9 +937,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 86
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1094,6 +1094,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -947,9 +936,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 180
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -940,9 +929,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 120
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1094,6 +1094,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -154,17 +154,6 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
@ -950,9 +939,6 @@
#define Y_MAX_POS Y_BED_SIZE
#define Z_MAX_POS 143.0
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/**
* Software Endstops
*

View file

@ -1095,6 +1095,33 @@
#endif
#endif
/**
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
// Retract and prime filament on tool-change
//#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
#define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
#endif
/**
* Position to park head during tool change.
* Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
*/
//#define TOOLCHANGE_PARK
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
#endif
#endif
/**
* Advanced Pause
* Experimental feature for filament change support and for parking the nozzle when paused.

View file

@ -37,13 +37,13 @@ void M217_report(const bool eeprom=false) {
const int16_t port = command_queue_port[cmd_queue_index_r];
#endif
#if ENABLED(SINGLENOZZLE)
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
serialprintPGM_P(port, eeprom ? PSTR(" M217") : PSTR("Singlenozzle:"));
SERIAL_ECHOPAIR_P(port, " S", LINEAR_UNIT(toolchange_settings.swap_length));
SERIAL_ECHOPAIR_P(port, " P", LINEAR_UNIT(toolchange_settings.prime_speed));
SERIAL_ECHOPAIR_P(port, " R", LINEAR_UNIT(toolchange_settings.retract_speed));
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#if ENABLED(TOOLCHANGE_PARK)
SERIAL_ECHOPAIR_P(port, " X", LINEAR_UNIT(toolchange_settings.change_point.x));
SERIAL_ECHOPAIR_P(port, " Y", LINEAR_UNIT(toolchange_settings.change_point.y));
#endif
@ -60,8 +60,8 @@ void M217_report(const bool eeprom=false) {
* S[linear] Swap length
* P[linear/m] Prime speed
* R[linear/m] Retract speed
* X[linear] Park X (Requires SINGLENOZZLE_SWAP_PARK)
* Y[linear] Park Y (Requires SINGLENOZZLE_SWAP_PARK)
* X[linear] Park X (Requires TOOLCHANGE_PARK)
* Y[linear] Park Y (Requires TOOLCHANGE_PARK)
* Z[linear] Z Raise
*/
void GcodeSuite::M217() {
@ -69,7 +69,7 @@ void GcodeSuite::M217() {
#define SPR_PARAM
#define XY_PARAM
#if ENABLED(SINGLENOZZLE)
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#undef SPR_PARAM
#define SPR_PARAM "SPR"
@ -77,20 +77,16 @@ void GcodeSuite::M217() {
if (parser.seenval('S')) { const float v = parser.value_linear_units(); toolchange_settings.swap_length = constrain(v, 0, 500); }
if (parser.seenval('P')) { const int16_t v = parser.value_linear_units(); toolchange_settings.prime_speed = constrain(v, 10, 5400); }
if (parser.seenval('R')) { const int16_t v = parser.value_linear_units(); toolchange_settings.retract_speed = constrain(v, 10, 5400); }
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#endif
#if ENABLED(TOOLCHANGE_PARK)
#undef XY_PARAM
#define XY_PARAM "XY"
if (parser.seenval('X')) { toolchange_settings.change_point.x = parser.value_linear_units(); }
if (parser.seenval('Y')) { toolchange_settings.change_point.y = parser.value_linear_units(); }
#endif
#endif
if (parser.seenval('Z')) { toolchange_settings.z_raise = parser.value_linear_units(); }
if (!parser.seen(SPR_PARAM XY_PARAM "Z")) M217_report();
}
#endif // EXTRUDERS > 1

View file

@ -313,6 +313,18 @@
#error "TOOLCHANGE_PARK_ZLIFT and TOOLCHANGE_UNPARK_ZLIFT are now TOOLCHANGE_ZRAISE. Please update your configuration."
#elif defined(SINGLENOZZLE_TOOLCHANGE_ZRAISE)
#error "SINGLENOZZLE_TOOLCHANGE_ZRAISE is now TOOLCHANGE_ZRAISE. Please update your configuration."
#elif defined(SINGLENOZZLE_SWAP_LENGTH)
#error "SINGLENOZZLE_SWAP_LENGTH is now TOOLCHANGE_FIL_SWAP_LENGTH. Please update your configuration."
#elif defined(SINGLENOZZLE_SWAP_RETRACT_SPEED)
#error "SINGLENOZZLE_SWAP_RETRACT_SPEED is now TOOLCHANGE_FIL_SWAP_RETRACT_SPEED. Please update your configuration."
#elif defined(SINGLENOZZLE_SWAP_PRIME_SPEED)
#error "SINGLENOZZLE_SWAP_PRIME_SPEED is now TOOLCHANGE_FIL_SWAP_PRIME_SPEED. Please update your configuration."
#elif defined(SINGLENOZZLE_SWAP_PARK)
#error "SINGLENOZZLE_SWAP_PARK is now TOOLCHANGE_PARK. Please update your configuration."
#elif defined(SINGLENOZZLE_TOOLCHANGE_XY)
#error "SINGLENOZZLE_TOOLCHANGE_XY is now TOOLCHANGE_PARK_XY. Please update your configuration."
#elif defined(SINGLENOZZLE_PARK_XY_FEEDRATE)
#error "SINGLENOZZLE_PARK_XY_FEEDRATE is now TOOLCHANGE_PARK_XY_FEEDRATE. Please update your configuration."
#elif defined(PARKING_EXTRUDER_SECURITY_RAISE)
#error "PARKING_EXTRUDER_SECURITY_RAISE is now TOOLCHANGE_ZRAISE. Please update your configuration."
#elif defined(SWITCHING_TOOLHEAD_SECURITY_RAISE)
@ -627,25 +639,25 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE,
#error "EXTRUDERS must be 1 with HEATERS_PARALLEL."
#endif
#if ENABLED(SINGLENOZZLE)
#ifndef SINGLENOZZLE_SWAP_LENGTH
#error "SINGLENOZZLE requires SINGLENOZZLE_SWAP_LENGTH. Please update your Configuration."
#elif !defined(SINGLENOZZLE_SWAP_RETRACT_SPEED)
#error "SINGLENOZZLE requires SINGLENOZZLE_SWAP_RETRACT_SPEED. Please update your Configuration."
#elif !defined(SINGLENOZZLE_SWAP_PRIME_SPEED)
#error "SINGLENOZZLE requires SINGLENOZZLE_SWAP_PRIME_SPEED. Please update your Configuration."
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
#ifndef TOOLCHANGE_FIL_SWAP_LENGTH
#error "TOOLCHANGE_FILAMENT_SWAP requires TOOLCHANGE_FIL_SWAP_LENGTH. Please update your Configuration."
#elif !defined(TOOLCHANGE_FIL_SWAP_RETRACT_SPEED)
#error "TOOLCHANGE_FILAMENT_SWAP requires TOOLCHANGE_FIL_SWAP_RETRACT_SPEED. Please update your Configuration."
#elif !defined(TOOLCHANGE_FIL_SWAP_PRIME_SPEED)
#error "TOOLCHANGE_FILAMENT_SWAP requires TOOLCHANGE_FIL_SWAP_PRIME_SPEED. Please update your Configuration."
#endif
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#ifndef SINGLENOZZLE_TOOLCHANGE_XY
#error "SINGLENOZZLE_SWAP_PARK requires SINGLENOZZLE_TOOLCHANGE_XY. Please update your Configuration."
#elif !defined(SINGLENOZZLE_PARK_XY_FEEDRATE)
#error "SINGLENOZZLE_SWAP_PARK requires SINGLENOZZLE_PARK_XY_FEEDRATE. Please update your Configuration."
#endif
#else
#if ENABLED(TOOLCHANGE_PARK)
#ifndef TOOLCHANGE_PARK_XY
#error "TOOLCHANGE_PARK requires TOOLCHANGE_PARK_XY. Please update your Configuration."
#elif !defined(TOOLCHANGE_PARK_XY_FEEDRATE)
#error "TOOLCHANGE_PARK requires TOOLCHANGE_PARK_XY_FEEDRATE. Please update your Configuration."
#endif
#endif
#ifndef TOOLCHANGE_ZRAISE
#error "SINGLENOZZLE requires TOOLCHANGE_ZRAISE. Please update your Configuration."
#endif
#endif
#error "TOOLCHANGE_ZRAISE required for EXTRUDERS > 1. Please update your Configuration."
#endif
#elif ENABLED(MK2_MULTIPLEXER)

View file

@ -96,7 +96,7 @@ static void lcd_factory_settings() {
void menu_tool_change() {
START_MENU();
MENU_BACK(MSG_MAIN);
#if ENABLED(SINGLENOZZLE)
#if ENABLED(TOOLCHANGE_PARK)
MENU_ITEM_EDIT(float3, MSG_FILAMENT_SWAP_LENGTH, &toolchange_settings.swap_length, 0, 200);
MENU_MULTIPLIER_ITEM_EDIT(int4, MSG_SINGLENOZZLE_RETRACT_SPD, &toolchange_settings.retract_speed, 10, 5400);
MENU_MULTIPLIER_ITEM_EDIT(int4, MSG_SINGLENOZZLE_PRIME_SPD, &toolchange_settings.prime_speed, 10, 5400);

View file

@ -266,7 +266,7 @@ typedef struct SettingsDataStruct {
fil_change_settings_t fc_settings[EXTRUDERS]; // M603 T U L
//
// SINGLENOZZLE toolchange values
// Tool-change settings
//
#if EXTRUDERS > 1
toolchange_settings_t toolchange_settings; // M217 S P R
@ -990,7 +990,7 @@ void MarlinSettings::postprocess() {
}
//
// SINGLENOZZLE
// Multiple Extruders
//
#if EXTRUDERS > 1
@ -1637,7 +1637,7 @@ void MarlinSettings::postprocess() {
}
//
// SINGLENOZZLE toolchange values
// Tool-change settings
//
#if EXTRUDERS > 1
_FIELD_TEST(toolchange_settings);
@ -1905,13 +1905,13 @@ void MarlinSettings::reset(PORTARG_SOLO) {
#endif
#if EXTRUDERS > 1
#if ENABLED(SINGLENOZZLE)
toolchange_settings.swap_length = SINGLENOZZLE_SWAP_LENGTH;
toolchange_settings.prime_speed = SINGLENOZZLE_SWAP_PRIME_SPEED;
toolchange_settings.retract_speed = SINGLENOZZLE_SWAP_RETRACT_SPEED;
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
toolchange_settings.change_point = SINGLENOZZLE_TOOLCHANGE_XY;
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
toolchange_settings.swap_length = TOOLCHANGE_FIL_SWAP_LENGTH;
toolchange_settings.prime_speed = TOOLCHANGE_FIL_SWAP_PRIME_SPEED;
toolchange_settings.retract_speed = TOOLCHANGE_FIL_SWAP_RETRACT_SPEED;
#endif
#if ENABLED(TOOLCHANGE_PARK)
toolchange_settings.change_point = TOOLCHANGE_PARK_XY;
#endif
toolchange_settings.z_raise = TOOLCHANGE_ZRAISE;
#endif
@ -2978,10 +2978,10 @@ void MarlinSettings::reset(PORTARG_SOLO) {
#endif // EXTRUDERS == 1
#endif // ADVANCED_PAUSE_FEATURE
#if ENABLED(SINGLENOZZLE)
#if EXTRUDERS > 1
CONFIG_ECHO_START;
if (!forReplay) {
SERIAL_ECHOLNPGM_P(port, "SINGLENOZZLE:");
SERIAL_ECHOLNPGM_P(port, "Tool-changing:");
CONFIG_ECHO_START;
}
M217_report(true);

View file

@ -441,30 +441,16 @@ inline void invalid_extruder_error(const uint8_t e) {
const float xhome = x_home_pos(active_extruder);
if (dual_x_carriage_mode == DXC_AUTO_PARK_MODE
&& IsRunning()
&& (delayed_move_time || current_position[X_AXIS] != xhome)
&& (delayed_move_time || current_position[X_AXIS] != xhome) && ! no_move
) {
float raised_z = current_position[Z_AXIS] + toolchange_settings.z_raise;
#if ENABLED(MAX_SOFTWARE_ENDSTOPS)
NOMORE(raised_z, soft_endstop_max[Z_AXIS]);
#endif
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOLNPAIR("Raise to ", raised_z);
SERIAL_ECHOLNPAIR("MoveX to ", xhome);
SERIAL_ECHOLNPAIR("Lower to ", current_position[Z_AXIS]);
}
#endif
// Park old head: 1) raise 2) move to park position 3) lower
#define CUR_X current_position[X_AXIS]
#define CUR_Y current_position[Y_AXIS]
#define CUR_Z current_position[Z_AXIS]
#define CUR_E current_position[E_AXIS]
planner.buffer_line(CUR_X, CUR_Y, raised_z, CUR_E, planner.settings.max_feedrate_mm_s[Z_AXIS], active_extruder);
planner.buffer_line(xhome, CUR_Y, raised_z, CUR_E, planner.settings.max_feedrate_mm_s[X_AXIS], active_extruder);
planner.buffer_line(xhome, CUR_Y, CUR_Z, CUR_E, planner.settings.max_feedrate_mm_s[Z_AXIS], active_extruder);
// Park old head
planner.buffer_line(xhome, current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], planner.settings.max_feedrate_mm_s[X_AXIS], active_extruder);
planner.synchronize();
}
@ -482,9 +468,6 @@ inline void invalid_extruder_error(const uint8_t e) {
if (DEBUGGING(LEVELING)) DEBUG_POS("New Extruder", current_position);
#endif
// Only when auto-parking are carriages safe to move
if (dual_x_carriage_mode != DXC_AUTO_PARK_MODE) no_move = true;
switch (dual_x_carriage_mode) {
case DXC_FULL_CONTROL_MODE:
// New current position is the position of the activated extruder
@ -493,12 +476,8 @@ inline void invalid_extruder_error(const uint8_t e) {
inactive_extruder_x_pos = destination[X_AXIS];
break;
case DXC_AUTO_PARK_MODE:
// record raised toolhead position for use by unpark
// record current raised toolhead position for use by unpark
COPY(raised_parked_position, current_position);
raised_parked_position[Z_AXIS] += toolchange_settings.z_raise;
#if ENABLED(MAX_SOFTWARE_ENDSTOPS)
NOMORE(raised_parked_position[Z_AXIS], soft_endstop_max[Z_AXIS]);
#endif
active_extruder_parked = true;
delayed_move_time = 0;
break;
@ -510,8 +489,6 @@ inline void invalid_extruder_error(const uint8_t e) {
DEBUG_POS("New extruder (parked)", current_position);
}
#endif
// No extra case for HAS_ABL in DUAL_X_CARRIAGE. Does that mean they don't work together?
}
#endif // DUAL_X_CARRIAGE
@ -521,6 +498,21 @@ inline void invalid_extruder_error(const uint8_t e) {
* previous tool out of the way and the new tool into place.
*/
void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool no_move/*=false*/) {
#if EXTRUDERS < 2
return invalid_extruder_error(tmp_extruder);
#elif ENABLED(MIXING_EXTRUDER) && MIXING_VIRTUAL_TOOLS > 1
if (tmp_extruder >= MIXING_VIRTUAL_TOOLS)
return invalid_extruder_error(tmp_extruder);
// T0-Tnnn: Switch virtual tool by changing the index to the mix
mixer.T(uint_fast8_t(tmp_extruder));
UNUSED(fr_mm_s);
UNUSED(no_move);
#else
#if DISABLED(MIXING_EXTRUDER)
planner.synchronize();
#endif
@ -536,16 +528,6 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
set_bed_leveling_enabled(false);
#endif
#if ENABLED(MIXING_EXTRUDER) && MIXING_VIRTUAL_TOOLS > 1
if (tmp_extruder >= MIXING_VIRTUAL_TOOLS)
return invalid_extruder_error(tmp_extruder);
// T0-Tnnn: Switch virtual tool by changing the index to the mix
mixer.T(uint_fast8_t(tmp_extruder));
UNUSED(fr_mm_s);
UNUSED(no_move);
#else // !MIXING_EXTRUDER || MIXING_VIRTUAL_TOOLS <= 1
if (tmp_extruder >= EXTRUDERS)
return invalid_extruder_error(tmp_extruder);
@ -556,13 +538,40 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
#endif
}
#if HOTENDS > 1
#if ENABLED(ULTIPANEL)
lcd_return_to_status();
#endif
const float old_feedrate_mm_s = fr_mm_s > 0.0 ? fr_mm_s : feedrate_mm_s;
feedrate_mm_s = fr_mm_s > 0.0 ? fr_mm_s : XY_PROBE_FEEDRATE_MM_S;
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
const bool should_swap = !no_move && toolchange_settings.swap_length;
#if ENABLED(PREVENT_COLD_EXTRUSION)
const bool too_cold = !DEBUGGING(DRYRUN) && (thermalManager.targetTooColdToExtrude(active_extruder) || thermalManager.targetTooColdToExtrude(tmp_extruder));
#else
constexpr bool too_cold = false;
#endif
if (should_swap) {
if (too_cold) {
SERIAL_ERROR_START();
SERIAL_ERRORLNPGM(MSG_ERR_HOTEND_TOO_COLD);
#if ENABLED(SINGLENOZZLE)
active_extruder = tmp_extruder;
return;
#endif
}
else {
#if ENABLED(ADVANCED_PAUSE_FEATURE)
do_pause_e_move(-toolchange_settings.swap_length, MMM_TO_MMS(toolchange_settings.retract_speed));
#else
current_position[E_AXIS] -= toolchange_settings.swap_length / planner.e_factor[active_extruder];
planner.buffer_line(current_position, MMM_TO_MMS(toolchange_settings.retract_speed), active_extruder);
#endif
}
}
#endif // TOOLCHANGE_FILAMENT_SWAP
if (tmp_extruder != active_extruder) {
const float old_feedrate_mm_s = fr_mm_s > 0.0 ? fr_mm_s : feedrate_mm_s;
feedrate_mm_s = fr_mm_s > 0.0 ? fr_mm_s : XY_PROBE_FEEDRATE_MM_S;
#if ENABLED(DUAL_X_CARRIAGE)
@ -571,49 +580,57 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
active_extruder = tmp_extruder;
update_software_endstops(X_AXIS);
active_extruder = !tmp_extruder;
// Don't move the new extruder out of bounds
if (!WITHIN(current_position[X_AXIS], soft_endstop_min[X_AXIS], soft_endstop_max[X_AXIS]))
no_move = true;
const float minx = soft_endstop_min[X_AXIS], maxx = soft_endstop_max[X_AXIS];
#else
// No software endstops? Use the configured limits
if (active_extruder == 0) {
if (!WITHIN(current_position[X_AXIS], X2_MIN_POS, X2_MAX_POS))
no_move = true;
}
else if (!WITHIN(current_position[X_AXIS], X1_MIN_POS, X1_MAX_POS))
no_move = true;
const float minx = tmp_extruder ? X2_MIN_POS : X1_MIN_POS,
maxx = tmp_extruder ? X2_MAX_POS : X1_MAX_POS;
#endif
#if HAS_LCD_MENU
lcd_return_to_status();
// Don't move the new extruder out of bounds
if (!WITHIN(current_position[X_AXIS], minx, maxx)) no_move = true;
#endif
if (!no_move) set_destination_from_current();
dualx_tool_change(tmp_extruder, no_move); // Can modify no_move
#else // !DUAL_X_CARRIAGE
if (!no_move) {
set_destination_from_current();
#if DISABLED(SWITCHING_NOZZLE)
// Do a small lift to avoid the workpiece in the move back (below)
#if ENABLED(TOOLCHANGE_PARK)
current_position[X_AXIS] = toolchange_settings.change_point.x;
current_position[Y_AXIS] = toolchange_settings.change_point.y;
#endif
current_position[Z_AXIS] += toolchange_settings.z_raise;
#if HAS_SOFTWARE_ENDSTOPS
NOMORE(current_position[Z_AXIS], soft_endstop_max[Z_AXIS]);
#endif
planner.buffer_line(current_position, feedrate_mm_s, active_extruder);
#endif
planner.synchronize();
}
#if HOTENDS > 1
const float xdiff = hotend_offset[X_AXIS][tmp_extruder] - hotend_offset[X_AXIS][active_extruder],
ydiff = hotend_offset[Y_AXIS][tmp_extruder] - hotend_offset[Y_AXIS][active_extruder];
ydiff = hotend_offset[Y_AXIS][tmp_extruder] - hotend_offset[Y_AXIS][active_extruder],
zdiff = hotend_offset[Z_AXIS][tmp_extruder] - hotend_offset[Z_AXIS][active_extruder];
#else
const float xdiff = 0, ydiff = 0, zdiff = 0;
#endif
#if ENABLED(PARKING_EXTRUDER) // Dual Parking extruder
constexpr float zdiff = 0;
#if ENABLED(DUAL_X_CARRIAGE)
dualx_tool_change(tmp_extruder, no_move);
#elif ENABLED(PARKING_EXTRUDER) // Dual Parking extruder
parking_extruder_tool_change(tmp_extruder, no_move);
#elif ENABLED(SWITCHING_TOOLHEAD) // Switching Toolhead
constexpr float zdiff = 0;
switching_toolhead_tool_change(tmp_extruder, fr_mm_s, no_move);
#else
const float zdiff = hotend_offset[Z_AXIS][tmp_extruder] - hotend_offset[Z_AXIS][active_extruder];
#if ENABLED(SWITCHING_NOZZLE)
#elif ENABLED(SWITCHING_NOZZLE)
// Always raise by a configured distance to avoid workpiece
current_position[Z_AXIS] += MAX(-zdiff, 0.0) + toolchange_settings.z_raise;
planner.buffer_line(current_position, planner.settings.max_feedrate_mm_s[Z_AXIS], active_extruder);
move_nozzle_servo(tmp_extruder);
#if HAS_SOFTWARE_ENDSTOPS
NOMORE(current_position[Z_AXIS], soft_endstop_max[Z_AXIS]);
#endif
if (!no_move)planner.buffer_line(current_position, planner.settings.max_feedrate_mm_s[Z_AXIS], active_extruder);
move_nozzle_servo(tmp_extruder);
#endif
#if ENABLED(DEBUG_LEVELING_FEATURE)
@ -626,15 +643,15 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
#endif
// The newly-selected extruder XY is actually at...
#if DISABLED(DUAL_X_CARRIAGE)
current_position[X_AXIS] += xdiff;
#endif
current_position[Y_AXIS] += ydiff;
current_position[Z_AXIS] += zdiff;
// Set the new active extruder
// Set the new active extruder if not already done in tool specific function above
active_extruder = tmp_extruder;
#endif // !DUAL_X_CARRIAGE
// Tell the planner the new "current position"
sync_plan_position();
@ -645,28 +662,47 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
constexpr bool safe_to_move = true;
#endif
// Raise, move, and lower again
// Return to position and lower again
if (safe_to_move && !no_move && IsRunning()) {
#if DISABLED(SWITCHING_NOZZLE)
// Do a small lift to avoid the workpiece in the move back (below)
current_position[Z_AXIS] += toolchange_settings.z_raise;
planner.buffer_line(current_position, planner.settings.max_feedrate_mm_s[Z_AXIS], active_extruder);
#endif
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) DEBUG_POS("Move back", destination);
#endif
#if ENABLED(DUAL_X_CARRIAGE)
// Dual x carriage does not properly apply these to current position due to command ordering
// So we apply the offsets for y and z to the destination here. X cannot have an offset in this mode
// as it is utilized for X2 home position.
destination[Y_AXIS] -= hotend_offset[Y_AXIS][active_extruder] - hotend_offset[Y_AXIS][tmp_extruder];
destination[Z_AXIS] -= hotend_offset[Z_AXIS][active_extruder] - hotend_offset[Z_AXIS][tmp_extruder];
#if ENABLED(SINGLENOZZLE)
#if FAN_COUNT > 0
singlenozzle_fan_speed[active_extruder] = fan_speed[0];
fan_speed[0] = singlenozzle_fan_speed[tmp_extruder];
#endif
singlenozzle_temp[active_extruder] = thermalManager.target_temperature[0];
if (singlenozzle_temp[tmp_extruder] && singlenozzle_temp[tmp_extruder] != singlenozzle_temp[active_extruder]) {
thermalManager.setTargetHotend(singlenozzle_temp[tmp_extruder], 0);
#if ENABLED(ULTRA_LCD)
thermalManager.set_heating_message(0);
#endif
(void)thermalManager.wait_for_hotend(0, false); // Wait for heating or cooling
}
active_extruder = tmp_extruder;
#endif
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
if (should_swap && !too_cold) {
#if ENABLED(ADVANCED_PAUSE_FEATURE)
do_pause_e_move(toolchange_settings.swap_length, toolchange_settings.prime_speed);
#else
current_position[E_AXIS] += toolchange_settings.swap_length / planner.e_factor[tmp_extruder];
planner.buffer_line(current_position, toolchange_settings.prime_speed, tmp_extruder);
#endif
planner.synchronize();
}
#endif
// Move back to the original (or tweaked) position
do_blocking_move_to(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS]);
#if ENABLED(DUAL_X_CARRIAGE)
active_extruder_parked = false;
#endif
feedrate_mm_s = old_feedrate_mm_s;
}
#if ENABLED(SWITCHING_NOZZLE)
else {
@ -683,99 +719,15 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
enable_solenoid_on_active_extruder();
#endif
feedrate_mm_s = old_feedrate_mm_s;
#if ENABLED(DUAL_X_CARRIAGE)
#if HAS_SOFTWARE_ENDSTOPS && ENABLED(DUAL_X_CARRIAGE)
update_software_endstops(X_AXIS);
#endif
#else // HOTENDS <= 1
UNUSED(fr_mm_s);
UNUSED(no_move);
#if ENABLED(MK2_MULTIPLEXER)
if (tmp_extruder >= E_STEPPERS) return invalid_extruder_error(tmp_extruder);
select_multiplexed_stepper(tmp_extruder);
#endif
#if ENABLED(SINGLENOZZLE)
#if ENABLED(PREVENT_COLD_EXTRUSION)
if (!DEBUGGING(DRYRUN) && thermalManager.targetTooColdToExtrude(active_extruder) && toolchange_settings.swap_length) {
SERIAL_ERROR_START();
SERIAL_ERRORLNPGM(MSG_ERR_HOTEND_TOO_COLD);
active_extruder = tmp_extruder;
return;
}
#endif
#if FAN_COUNT > 0
singlenozzle_fan_speed[active_extruder] = fan_speed[0];
fan_speed[0] = singlenozzle_fan_speed[tmp_extruder];
#endif
if (toolchange_settings.swap_length) {
#if ENABLED(ADVANCED_PAUSE_FEATURE)
do_pause_e_move(-toolchange_settings.swap_length, MMM_TO_MMS(toolchange_settings.retract_speed));
#else
current_position[E_AXIS] -= toolchange_settings.swap_length / planner.e_factor[active_extruder];
planner.buffer_line(current_position, MMM_TO_MMS(toolchange_settings.retract_speed), active_extruder);
#endif
}
constexpr float snfr =
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
MMM_TO_MMS(SINGLENOZZLE_PARK_XY_FEEDRATE);
#else
0
#endif
;
float old_pos[XYZ];
if (!no_move) {
COPY(old_pos, current_position);
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
current_position[X_AXIS] = toolchange_settings.change_point.x;
current_position[Y_AXIS] = toolchange_settings.change_point.y;
#endif
current_position[Z_AXIS] += toolchange_settings.z_raise;
do_blocking_move_to(current_position, snfr);
}
singlenozzle_temp[active_extruder] = thermalManager.target_temperature[0];
if (singlenozzle_temp[tmp_extruder] && singlenozzle_temp[tmp_extruder] != singlenozzle_temp[active_extruder]) {
thermalManager.setTargetHotend(singlenozzle_temp[tmp_extruder], 0);
#if ENABLED(ULTRA_LCD)
thermalManager.set_heating_message(0);
#endif
(void)thermalManager.wait_for_hotend(0, false); // Wait for heating or cooling
}
active_extruder = tmp_extruder;
if (toolchange_settings.swap_length) {
#if ENABLED(ADVANCED_PAUSE_FEATURE)
do_pause_e_move(toolchange_settings.swap_length, toolchange_settings.prime_speed);
#else
current_position[E_AXIS] += toolchange_settings.swap_length / planner.e_factor[tmp_extruder];
planner.buffer_line(current_position, toolchange_settings.prime_speed, tmp_extruder);
#endif
}
if (!no_move) do_blocking_move_to(old_pos, snfr);
#elif EXTRUDERS > 1
active_extruder = tmp_extruder;
#endif
#endif // HOTENDS <= 1
#if DO_SWITCH_EXTRUDER
planner.synchronize();
move_extruder_servo(active_extruder);
@ -793,5 +745,5 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR(MSG_ACTIVE_EXTRUDER, int(active_extruder));
#endif // !MIXING_EXTRUDER || MIXING_VIRTUAL_TOOLS <= 1
#endif // EXTRUDERS <= 1 && (!MIXING_EXTRUDER || MIXING_VIRTUAL_TOOLS <= 1)
}

View file

@ -26,12 +26,12 @@
#if EXTRUDERS > 1
typedef struct {
#if ENABLED(SINGLENOZZLE)
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
float swap_length;
int16_t prime_speed, retract_speed;
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
struct { float x, y; } change_point;
#endif
#if ENABLED(TOOLCHANGE_PARK)
struct { float x, y; } change_point;
#endif
float z_raise;
} toolchange_settings_t;

View file

@ -10,7 +10,7 @@ restore_configs
opt_set MOTHERBOARD BOARD_STM32F1R
opt_set EXTRUDERS 2
opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT \
PAREN_COMMENTS GCODE_MOTION_MODES SINGLENOZZLE SINGLENOZZLE_SWAP_LENGTH
PAREN_COMMENTS GCODE_MOTION_MODES SINGLENOZZLE TOOLCHANGE_FILAMENT_SWAP TOOLCHANGE_PARK
exec_test $1 $2 "STM32F1R EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT PAREN_COMMENTS GCODE_MOTION_MODES"
opt_enable SPINDLE_LASER_ENABLE