Double ADC read frequency (#16864)

This commit is contained in:
Scott Lahteine 2020-02-15 19:10:46 -06:00 committed by GitHub
parent 52a1268089
commit 64b96f3908
Signed by: GitHub
GPG key ID: 4AEE18F83AFDEB23
2 changed files with 143 additions and 91 deletions

View file

@ -2798,23 +2798,133 @@ void Temperature::tick() {
if ((do_buttons ^= true)) ui.update_buttons(); if ((do_buttons ^= true)) ui.update_buttons();
/** /**
* One sensor is sampled on every other call of the ISR. * On each call to the ISR one sensor is Sampled and
* Each sensor is read 16 (OVERSAMPLENR) times, taking the average. * the next sensor is Prepared.
* *
* On each Prepare pass, ADC is started for a sensor pin. * Sensors are read 16 (OVERSAMPLENR) times and the
* On the next pass, the ADC value is read and accumulated. * final reading takes the average.
* *
* This gives each ADC 0.9765ms to charge up. * Extra do-nothing passes may exist when there are
* only a few sensors. This is set by MIN_ADC_ISR_LOOPS.
*
* The timing of this ISR gives ADCs 0.9765ms to charge up.
*/ */
#define ACCUMULATE_ADC(obj) do{ \ #define ACCUMULATE_ADC(obj) do{ \
if (!HAL_ADC_READY()) next_sensor_state = adc_sensor_state; \ if (HAL_ADC_READY()) \
else obj.sample(HAL_READ_ADC()); \ obj.sample(HAL_READ_ADC()); \
else \
next_sensor_state = adc_sensor_state; \
}while(0) }while(0)
ADCSensorState next_sensor_state = adc_sensor_state < SensorsReady ? (ADCSensorState)(int(adc_sensor_state) + 1) : StartSampling; #define NEXT_ENUM(A) (typeof(A))(int(A) + 1)
#define NEXT_ADC_STATE(N) ((N) >= SensorsReady ? StartSampling : NEXT_ENUM(N))
// Assume the machine will go on to the next state
ADCSensorState next_sensor_state = NEXT_ADC_STATE(adc_sensor_state);
switch (adc_sensor_state) { switch (adc_sensor_state) {
default: break;
#if HAS_TEMP_ADC_0
case MeasureTemp_0: ACCUMULATE_ADC(temp_hotend[0]); break;
#endif
#if HAS_HEATED_BED
case MeasureTemp_BED: ACCUMULATE_ADC(temp_bed); break;
#endif
#if HAS_TEMP_CHAMBER
case MeasureTemp_CHAMBER: ACCUMULATE_ADC(temp_chamber); break;
#endif
#if HAS_TEMP_PROBE
case MeasureTemp_PROBE: ACCUMULATE_ADC(temp_probe); break;
#endif
#if HAS_TEMP_ADC_1
case MeasureTemp_1: ACCUMULATE_ADC(temp_hotend[1]); break;
#endif
#if HAS_TEMP_ADC_2
case MeasureTemp_2: ACCUMULATE_ADC(temp_hotend[2]); break;
#endif
#if HAS_TEMP_ADC_3
case MeasureTemp_3: ACCUMULATE_ADC(temp_hotend[3]); break;
#endif
#if HAS_TEMP_ADC_4
case MeasureTemp_4: ACCUMULATE_ADC(temp_hotend[4]); break;
#endif
#if HAS_TEMP_ADC_5
case MeasureTemp_5: ACCUMULATE_ADC(temp_hotend[5]); break;
#endif
#if HAS_TEMP_ADC_6
case MeasureTemp_6: ACCUMULATE_ADC(temp_hotend[6]); break;
#endif
#if HAS_TEMP_ADC_7
case MeasureTemp_7: ACCUMULATE_ADC(temp_hotend[7]); break;
#endif
#if ENABLED(FILAMENT_WIDTH_SENSOR)
case Measure_FILWIDTH:
if (HAL_ADC_READY())
filwidth.accumulate(HAL_READ_ADC());
else
next_sensor_state = adc_sensor_state; // redo this state
break;
#endif
#if HAS_JOY_ADC_X
case MeasureJoy_X: ACCUMULATE_ADC(joystick.x); break;
#endif
#if HAS_JOY_ADC_Y
case MeasureJoy_Y: ACCUMULATE_ADC(joystick.y); break;
#endif
#if HAS_JOY_ADC_Z
case MeasureJoy_Z: ACCUMULATE_ADC(joystick.z); break;
#endif
#if HAS_ADC_BUTTONS
#ifndef ADC_BUTTON_DEBOUNCE_DELAY
#define ADC_BUTTON_DEBOUNCE_DELAY 16
#endif
case Measure_ADC_KEY: {
if (HAL_ADC_READY()) {
if (ADCKey_count < ADC_BUTTON_DEBOUNCE_DELAY) {
raw_ADCKey_value = HAL_READ_ADC();
if (raw_ADCKey_value <= (HAL_ADC_RANGE) * 900UL / 1024UL) {
NOMORE(current_ADCKey_raw, raw_ADCKey_value);
ADCKey_count++;
}
else { // ADC Key release
if (ADCKey_count > 0) {
if (ADCKey_pressed) {
ADCKey_count = 0;
current_ADCKey_raw = HAL_ADC_RANGE;
}
else
ADCKey_count++;
}
else
ADCKey_pressed = false;
}
if (ADCKey_count == ADC_BUTTON_DEBOUNCE_DELAY) ADCKey_pressed = true;
}
}
else
next_sensor_state = adc_sensor_state; // redo this state
} break;
#endif // HAS_ADC_BUTTONS
} // switch(adc_sensor_state)
// Go to the next state (may be unchanged)
adc_sensor_state = next_sensor_state;
// Assume that the state advances
next_sensor_state = NEXT_ADC_STATE(adc_sensor_state);
switch (adc_sensor_state) {
default: break;
case SensorsReady: { case SensorsReady: {
// All sensors have been read. Stay in this state for a few // All sensors have been read. Stay in this state for a few
// ISRs to save on calls to temp update/checking code below. // ISRs to save on calls to temp update/checking code below.
@ -2824,128 +2934,72 @@ void Temperature::tick() {
if (delay_count == 0) delay_count = extra_loops; // Init this delay if (delay_count == 0) delay_count = extra_loops; // Init this delay
if (--delay_count) // While delaying... if (--delay_count) // While delaying...
next_sensor_state = SensorsReady; // retain this state (else, next state will be 0) next_sensor_state = SensorsReady; // retain this state (else, next state will be 0)
break; break; // No fallthru
} }
else { else {
adc_sensor_state = StartSampling; // Fall-through to start sampling adc_sensor_state = StartSampling; // Fall through to count up oversamples
next_sensor_state = (ADCSensorState)(int(StartSampling) + 1); next_sensor_state = NEXT_ENUM(StartSampling); // and possibly send the final readings.
} }
} }
// fallthru
case StartSampling: // Start of sampling loops. Do updates/checks. case StartSampling: // Start of sampling loops. Do updates/checks.
if (++temp_count >= OVERSAMPLENR) { // 10 * 16 * 1/(16000000/64/256) = 164ms. if (++temp_count >= OVERSAMPLENR) { // 10 * 16 * 1 / (16000000 / 64 / 256) = 164ms.
temp_count = 0; temp_count = 0;
readings_ready(); readings_ready();
} }
break; adc_sensor_state = NEXT_ENUM(StartSampling); // Do one Prepare phase before exiting
next_sensor_state = NEXT_ENUM(adc_sensor_state); // Also update the next state
// fallthru
#if HAS_TEMP_ADC_0 #if HAS_TEMP_ADC_0
case PrepareTemp_0: HAL_START_ADC(TEMP_0_PIN); break; case PrepareTemp_0: HAL_START_ADC(TEMP_0_PIN); break;
case MeasureTemp_0: ACCUMULATE_ADC(temp_hotend[0]); break;
#endif #endif
#if HAS_HEATED_BED #if HAS_HEATED_BED
case PrepareTemp_BED: HAL_START_ADC(TEMP_BED_PIN); break; case PrepareTemp_BED: HAL_START_ADC(TEMP_BED_PIN); break;
case MeasureTemp_BED: ACCUMULATE_ADC(temp_bed); break;
#endif #endif
#if HAS_TEMP_CHAMBER #if HAS_TEMP_CHAMBER
case PrepareTemp_CHAMBER: HAL_START_ADC(TEMP_CHAMBER_PIN); break; case PrepareTemp_CHAMBER: HAL_START_ADC(TEMP_CHAMBER_PIN); break;
case MeasureTemp_CHAMBER: ACCUMULATE_ADC(temp_chamber); break;
#endif #endif
#if HAS_TEMP_PROBE #if HAS_TEMP_PROBE
case PrepareTemp_PROBE: HAL_START_ADC(TEMP_PROBE_PIN); break; case PrepareTemp_PROBE: HAL_START_ADC(TEMP_PROBE_PIN); break;
case MeasureTemp_PROBE: ACCUMULATE_ADC(temp_probe); break;
#endif #endif
#if HAS_TEMP_ADC_1 #if HAS_TEMP_ADC_1
case PrepareTemp_1: HAL_START_ADC(TEMP_1_PIN); break; case PrepareTemp_1: HAL_START_ADC(TEMP_1_PIN); break;
case MeasureTemp_1: ACCUMULATE_ADC(temp_hotend[1]); break;
#endif #endif
#if HAS_TEMP_ADC_2 #if HAS_TEMP_ADC_2
case PrepareTemp_2: HAL_START_ADC(TEMP_2_PIN); break; case PrepareTemp_2: HAL_START_ADC(TEMP_2_PIN); break;
case MeasureTemp_2: ACCUMULATE_ADC(temp_hotend[2]); break;
#endif #endif
#if HAS_TEMP_ADC_3 #if HAS_TEMP_ADC_3
case PrepareTemp_3: HAL_START_ADC(TEMP_3_PIN); break; case PrepareTemp_3: HAL_START_ADC(TEMP_3_PIN); break;
case MeasureTemp_3: ACCUMULATE_ADC(temp_hotend[3]); break;
#endif #endif
#if HAS_TEMP_ADC_4 #if HAS_TEMP_ADC_4
case PrepareTemp_4: HAL_START_ADC(TEMP_4_PIN); break; case PrepareTemp_4: HAL_START_ADC(TEMP_4_PIN); break;
case MeasureTemp_4: ACCUMULATE_ADC(temp_hotend[4]); break;
#endif #endif
#if HAS_TEMP_ADC_5 #if HAS_TEMP_ADC_5
case PrepareTemp_5: HAL_START_ADC(TEMP_5_PIN); break; case PrepareTemp_5: HAL_START_ADC(TEMP_5_PIN); break;
case MeasureTemp_5: ACCUMULATE_ADC(temp_hotend[5]); break;
#endif #endif
#if HAS_TEMP_ADC_6 #if HAS_TEMP_ADC_6
case PrepareTemp_6: HAL_START_ADC(TEMP_6_PIN); break; case PrepareTemp_6: HAL_START_ADC(TEMP_6_PIN); break;
case MeasureTemp_6: ACCUMULATE_ADC(temp_hotend[6]); break;
#endif #endif
#if HAS_TEMP_ADC_7 #if HAS_TEMP_ADC_7
case PrepareTemp_7: HAL_START_ADC(TEMP_7_PIN); break; case PrepareTemp_7: HAL_START_ADC(TEMP_7_PIN); break;
case MeasureTemp_7: ACCUMULATE_ADC(temp_hotend[7]); break;
#endif #endif
#if ENABLED(FILAMENT_WIDTH_SENSOR) #if ENABLED(FILAMENT_WIDTH_SENSOR)
case Prepare_FILWIDTH: HAL_START_ADC(FILWIDTH_PIN); break; case Prepare_FILWIDTH: HAL_START_ADC(FILWIDTH_PIN); break;
case Measure_FILWIDTH:
if (!HAL_ADC_READY())
next_sensor_state = adc_sensor_state; // redo this state
else
filwidth.accumulate(HAL_READ_ADC());
break;
#endif #endif
#if HAS_JOY_ADC_X #if HAS_JOY_ADC_X
case PrepareJoy_X: HAL_START_ADC(JOY_X_PIN); break; case PrepareJoy_X: HAL_START_ADC(JOY_X_PIN); break;
case MeasureJoy_X: ACCUMULATE_ADC(joystick.x); break;
#endif #endif
#if HAS_JOY_ADC_Y #if HAS_JOY_ADC_Y
case PrepareJoy_Y: HAL_START_ADC(JOY_Y_PIN); break; case PrepareJoy_Y: HAL_START_ADC(JOY_Y_PIN); break;
case MeasureJoy_Y: ACCUMULATE_ADC(joystick.y); break;
#endif #endif
#if HAS_JOY_ADC_Z #if HAS_JOY_ADC_Z
case PrepareJoy_Z: HAL_START_ADC(JOY_Z_PIN); break; case PrepareJoy_Z: HAL_START_ADC(JOY_Z_PIN); break;
case MeasureJoy_Z: ACCUMULATE_ADC(joystick.z); break;
#endif #endif
#if HAS_ADC_BUTTONS #if HAS_ADC_BUTTONS
#ifndef ADC_BUTTON_DEBOUNCE_DELAY case Prepare_ADC_KEY: HAL_START_ADC(ADC_KEYPAD_PIN); break;
#define ADC_BUTTON_DEBOUNCE_DELAY 16 #endif
#endif
case Prepare_ADC_KEY: HAL_START_ADC(ADC_KEYPAD_PIN); break;
case Measure_ADC_KEY:
if (!HAL_ADC_READY())
next_sensor_state = adc_sensor_state; // redo this state
else if (ADCKey_count < ADC_BUTTON_DEBOUNCE_DELAY) {
raw_ADCKey_value = HAL_READ_ADC();
if (raw_ADCKey_value <= 900UL * HAL_ADC_RANGE / 1024UL) {
NOMORE(current_ADCKey_raw, raw_ADCKey_value);
ADCKey_count++;
}
else { //ADC Key release
if (ADCKey_count > 0) ADCKey_count++; else ADCKey_pressed = false;
if (ADCKey_pressed) {
ADCKey_count = 0;
current_ADCKey_raw = HAL_ADC_RANGE;
}
}
}
if (ADCKey_count == ADC_BUTTON_DEBOUNCE_DELAY) ADCKey_pressed = true;
break;
#endif // HAS_ADC_BUTTONS
case StartupDelay: break;
} // switch(adc_sensor_state) } // switch(adc_sensor_state)

View file

@ -138,7 +138,6 @@ board = sanguino_atmega1284p
lib_deps = ${common.lib_deps} lib_deps = ${common.lib_deps}
TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
src_filter = ${common.default_src_filter} +<src/HAL/HAL_AVR> src_filter = ${common.default_src_filter} +<src/HAL/HAL_AVR>
build_flags = ${common.build_flags}
lib_ignore = TMCStepper lib_ignore = TMCStepper
upload_speed = 57600 upload_speed = 57600
@ -151,7 +150,6 @@ board = sanguino_atmega1284p
lib_deps = ${common.lib_deps} lib_deps = ${common.lib_deps}
TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
src_filter = ${common.default_src_filter} +<src/HAL/HAL_AVR> src_filter = ${common.default_src_filter} +<src/HAL/HAL_AVR>
build_flags = ${common.build_flags}
lib_ignore = TMCStepper lib_ignore = TMCStepper
upload_speed = 115200 upload_speed = 115200