Always report position on config load/reset

This commit is contained in:
Scott Lahteine 2017-12-10 21:39:07 -06:00
parent 117fc872a7
commit 6686d937fb

View file

@ -216,14 +216,15 @@ MarlinSettings settings;
float new_z_fade_height;
#endif
#if ENABLED(CNC_COORDINATE_SYSTEMS)
bool position_changed;
#endif
/**
* Post-process after Retrieve or Reset
*/
void MarlinSettings::postprocess() {
const float oldpos[XYZE] = {
current_position[X_AXIS], current_position[Y_AXIS],
current_position[Z_AXIS], current_position[E_AXIS]
};
// steps per s2 needs to be updated to agree with units per s2
planner.reset_acceleration_rates();
@ -233,10 +234,6 @@ void MarlinSettings::postprocess() {
recalc_delta_settings();
#endif
// Refresh steps_to_mm with the reciprocal of axis_steps_per_mm
// and init stepper.count[], planner.position[] with current_position
planner.refresh_positioning();
#if ENABLED(PIDTEMP)
thermalManager.updatePID();
#endif
@ -249,7 +246,7 @@ void MarlinSettings::postprocess() {
#endif
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
set_z_fade_height(new_z_fade_height);
set_z_fade_height(new_z_fade_height, false); // false = no report
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
@ -264,13 +261,14 @@ void MarlinSettings::postprocess() {
#if ENABLED(FWRETRACT)
fwretract.refresh_autoretract();
#endif
// Refresh steps_to_mm with the reciprocal of axis_steps_per_mm
// and init stepper.count[], planner.position[] with current_position
planner.refresh_positioning();
#if ENABLED(CNC_COORDINATE_SYSTEMS)
if (position_changed) {
report_current_position();
position_changed = false;
}
#endif
// Various factors can change the current position
if (memcmp(oldpos, current_position, sizeof(oldpos)))
report_current_position();
}
#if ENABLED(EEPROM_SETTINGS)
@ -308,7 +306,7 @@ void MarlinSettings::postprocess() {
EEPROM_WRITE(ver); // invalidate data first
EEPROM_SKIP(working_crc); // Skip the checksum slot
working_crc = 0; // Init to 0. Accumulated by EEPROM_READ
working_crc = 0; // clear before first "real data"
const uint8_t esteppers = COUNT(planner.axis_steps_per_mm) - XYZ;
EEPROM_WRITE(esteppers);
@ -342,7 +340,7 @@ void MarlinSettings::postprocess() {
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
const float zfh = planner.z_fade_height;
#else
const float zfh = 0.0;
const float zfh = 10.0;
#endif
EEPROM_WRITE(zfh);
@ -725,7 +723,7 @@ void MarlinSettings::postprocess() {
float dummy = 0;
bool dummyb;
working_crc = 0; //clear before reading first "real data"
working_crc = 0; // Init to 0. Accumulated by EEPROM_READ
// Number of esteppers may change
uint8_t esteppers;
@ -913,7 +911,6 @@ void MarlinSettings::postprocess() {
#if DISABLED(ULTIPANEL)
int lcd_preheat_hotend_temp[2], lcd_preheat_bed_temp[2], lcd_preheat_fan_speed[2];
#endif
EEPROM_READ(lcd_preheat_hotend_temp); // 2 floats
EEPROM_READ(lcd_preheat_bed_temp); // 2 floats
EEPROM_READ(lcd_preheat_fan_speed); // 2 floats
@ -1094,7 +1091,7 @@ void MarlinSettings::postprocess() {
//
#if ENABLED(CNC_COORDINATE_SYSTEMS)
position_changed = gcode.select_coordinate_system(-1); // Go back to machine space
(void)gcode.select_coordinate_system(-1); // Go back to machine space
EEPROM_READ(gcode.coordinate_system); // 27 floats
#else
for (uint8_t q = 27; q--;) EEPROM_READ(dummy);