From 68457ee9034fdd4f6b01ba317ae26d99256d4e55 Mon Sep 17 00:00:00 2001
From: Scott Lahteine <sourcetree@thinkyhead.com>
Date: Tue, 9 Feb 2016 20:04:07 -0800
Subject: [PATCH] For Dual Y/Z use the next available extruder pins

---
 Marlin/Conditionals.h |  3 +++
 Marlin/pins.h         | 22 ++++++++++++++++------
 2 files changed, 19 insertions(+), 6 deletions(-)

diff --git a/Marlin/Conditionals.h b/Marlin/Conditionals.h
index 979ddb791..bf96f0f21 100644
--- a/Marlin/Conditionals.h
+++ b/Marlin/Conditionals.h
@@ -462,6 +462,7 @@
   #define HAS_E1_ENABLE (PIN_EXISTS(E1_ENABLE))
   #define HAS_E2_ENABLE (PIN_EXISTS(E2_ENABLE))
   #define HAS_E3_ENABLE (PIN_EXISTS(E3_ENABLE))
+  #define HAS_E4_ENABLE (PIN_EXISTS(E4_ENABLE))
   #define HAS_X_DIR (PIN_EXISTS(X_DIR))
   #define HAS_X2_DIR (PIN_EXISTS(X2_DIR))
   #define HAS_Y_DIR (PIN_EXISTS(Y_DIR))
@@ -472,6 +473,7 @@
   #define HAS_E1_DIR (PIN_EXISTS(E1_DIR))
   #define HAS_E2_DIR (PIN_EXISTS(E2_DIR))
   #define HAS_E3_DIR (PIN_EXISTS(E3_DIR))
+  #define HAS_E4_DIR (PIN_EXISTS(E4_DIR))
   #define HAS_X_STEP (PIN_EXISTS(X_STEP))
   #define HAS_X2_STEP (PIN_EXISTS(X2_STEP))
   #define HAS_Y_STEP (PIN_EXISTS(Y_STEP))
@@ -482,6 +484,7 @@
   #define HAS_E1_STEP (PIN_EXISTS(E1_STEP))
   #define HAS_E2_STEP (PIN_EXISTS(E2_STEP))
   #define HAS_E3_STEP (PIN_EXISTS(E3_STEP))
+  #define HAS_E4_STEP (PIN_EXISTS(E4_STEP))
 
   /**
    * Helper Macros for heaters and extruder fan
diff --git a/Marlin/pins.h b/Marlin/pins.h
index 8846b428f..bbb7df8a5 100644
--- a/Marlin/pins.h
+++ b/Marlin/pins.h
@@ -236,16 +236,26 @@
   #define Z_MIN_PIN          -1
 #endif
 
+//
+// Dual Y and Dual Z support
+// These options are mutually-exclusive
+//
+
+#define __EPIN(p,q) E##p##_##q##_PIN
+#define _EPIN(p,q) __EPIN(p,q)
+
+// The Y2 axis, if any, should be the next open extruder port
 #ifndef Y2_STEP_PIN
-  #define Y2_STEP_PIN      E1_STEP_PIN
-  #define Y2_DIR_PIN       E1_DIR_PIN
-  #define Y2_ENABLE_PIN    E1_ENABLE_PIN
+  #define Y2_STEP_PIN   _EPIN(EXTRUDERS, STEP)
+  #define Y2_DIR_PIN    _EPIN(EXTRUDERS, DIR)
+  #define Y2_ENABLE_PIN _EPIN(EXTRUDERS, ENABLE)
 #endif
 
+// The Z2 axis, if any, should be the next open extruder port
 #ifndef Z2_STEP_PIN
-  #define Z2_STEP_PIN      E1_STEP_PIN
-  #define Z2_DIR_PIN       E1_DIR_PIN
-  #define Z2_ENABLE_PIN    E1_ENABLE_PIN
+  #define Z2_STEP_PIN   _EPIN(EXTRUDERS, STEP)
+  #define Z2_DIR_PIN    _EPIN(EXTRUDERS, DIR)
+  #define Z2_ENABLE_PIN _EPIN(EXTRUDERS, ENABLE)
 #endif
 
 #define SENSITIVE_PINS { 0, 1, \