TMC SW SPI pins in Configuration_adv.h

Counterpart to #9632
This commit is contained in:
Scott Lahteine 2018-02-08 18:49:05 -06:00
parent 9854262334
commit 694d2ebec0
42 changed files with 319 additions and 79 deletions

View file

@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library * You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper). * (https://github.com/teemuatlut/TMC2130Stepper).
* *
* To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins * the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
* You may also use software SPI if you wish to use general purpose IO pins.
*/ */
//#define HAVE_TMC2130 //#define HAVE_TMC2130
@ -1087,9 +1088,13 @@
/** /**
* Use software SPI for TMC2130. * Use software SPI for TMC2130.
* SW SPI pins are defined the respective pins files. * The default SW SPI pins are defined the respective pins files,
* but you can override or define them here.
*/ */
//#define TMC_USE_SW_SPI //#define TMC_USE_SW_SPI
//#define TMC_SW_MOSI -1
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
/** /**
* Use Trinamic's ultra quiet stepping mode. * Use Trinamic's ultra quiet stepping mode.

View file

@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library * You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper). * (https://github.com/teemuatlut/TMC2130Stepper).
* *
* To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins * the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
* You may also use software SPI if you wish to use general purpose IO pins.
*/ */
//#define HAVE_TMC2130 //#define HAVE_TMC2130
@ -1087,9 +1088,13 @@
/** /**
* Use software SPI for TMC2130. * Use software SPI for TMC2130.
* SW SPI pins are defined the respective pins files. * The default SW SPI pins are defined the respective pins files,
* but you can override or define them here.
*/ */
//#define TMC_USE_SW_SPI //#define TMC_USE_SW_SPI
//#define TMC_SW_MOSI -1
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
/** /**
* Use Trinamic's ultra quiet stepping mode. * Use Trinamic's ultra quiet stepping mode.

View file

@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library * You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper). * (https://github.com/teemuatlut/TMC2130Stepper).
* *
* To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins * the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
* You may also use software SPI if you wish to use general purpose IO pins.
*/ */
//#define HAVE_TMC2130 //#define HAVE_TMC2130
@ -1087,9 +1088,13 @@
/** /**
* Use software SPI for TMC2130. * Use software SPI for TMC2130.
* SW SPI pins are defined the respective pins files. * The default SW SPI pins are defined the respective pins files,
* but you can override or define them here.
*/ */
//#define TMC_USE_SW_SPI //#define TMC_USE_SW_SPI
//#define TMC_SW_MOSI -1
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
/** /**
* Use Trinamic's ultra quiet stepping mode. * Use Trinamic's ultra quiet stepping mode.

View file

@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library * You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper). * (https://github.com/teemuatlut/TMC2130Stepper).
* *
* To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins * the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
* You may also use software SPI if you wish to use general purpose IO pins.
*/ */
//#define HAVE_TMC2130 //#define HAVE_TMC2130
@ -1087,9 +1088,13 @@
/** /**
* Use software SPI for TMC2130. * Use software SPI for TMC2130.
* SW SPI pins are defined the respective pins files. * The default SW SPI pins are defined the respective pins files,
* but you can override or define them here.
*/ */
//#define TMC_USE_SW_SPI //#define TMC_USE_SW_SPI
//#define TMC_SW_MOSI -1
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
/** /**
* Use Trinamic's ultra quiet stepping mode. * Use Trinamic's ultra quiet stepping mode.

View file

@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library * You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper). * (https://github.com/teemuatlut/TMC2130Stepper).
* *
* To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins * the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
* You may also use software SPI if you wish to use general purpose IO pins.
*/ */
//#define HAVE_TMC2130 //#define HAVE_TMC2130
@ -1087,9 +1088,13 @@
/** /**
* Use software SPI for TMC2130. * Use software SPI for TMC2130.
* SW SPI pins are defined the respective pins files. * The default SW SPI pins are defined the respective pins files,
* but you can override or define them here.
*/ */
//#define TMC_USE_SW_SPI //#define TMC_USE_SW_SPI
//#define TMC_SW_MOSI -1
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
/** /**
* Use Trinamic's ultra quiet stepping mode. * Use Trinamic's ultra quiet stepping mode.

View file

@ -1000,9 +1000,10 @@
* You'll also need the TMC2130Stepper Arduino library * You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper). * (https://github.com/teemuatlut/TMC2130Stepper).
* *
* To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins * the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
* You may also use software SPI if you wish to use general purpose IO pins.
*/ */
//#define HAVE_TMC2130 //#define HAVE_TMC2130
@ -1088,9 +1089,13 @@
/** /**
* Use software SPI for TMC2130. * Use software SPI for TMC2130.
* SW SPI pins are defined the respective pins files. * The default SW SPI pins are defined the respective pins files,
* but you can override or define them here.
*/ */
//#define TMC_USE_SW_SPI //#define TMC_USE_SW_SPI
//#define TMC_SW_MOSI -1
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
/** /**
* Use Trinamic's ultra quiet stepping mode. * Use Trinamic's ultra quiet stepping mode.

View file

@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library * You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper). * (https://github.com/teemuatlut/TMC2130Stepper).
* *
* To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins * the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
* You may also use software SPI if you wish to use general purpose IO pins.
*/ */
//#define HAVE_TMC2130 //#define HAVE_TMC2130
@ -1087,9 +1088,13 @@
/** /**
* Use software SPI for TMC2130. * Use software SPI for TMC2130.
* SW SPI pins are defined the respective pins files. * The default SW SPI pins are defined the respective pins files,
* but you can override or define them here.
*/ */
//#define TMC_USE_SW_SPI //#define TMC_USE_SW_SPI
//#define TMC_SW_MOSI -1
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
/** /**
* Use Trinamic's ultra quiet stepping mode. * Use Trinamic's ultra quiet stepping mode.

View file

@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library * You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper). * (https://github.com/teemuatlut/TMC2130Stepper).
* *
* To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins * the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
* You may also use software SPI if you wish to use general purpose IO pins.
*/ */
//#define HAVE_TMC2130 //#define HAVE_TMC2130
@ -1087,9 +1088,13 @@
/** /**
* Use software SPI for TMC2130. * Use software SPI for TMC2130.
* SW SPI pins are defined the respective pins files. * The default SW SPI pins are defined the respective pins files,
* but you can override or define them here.
*/ */
//#define TMC_USE_SW_SPI //#define TMC_USE_SW_SPI
//#define TMC_SW_MOSI -1
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
/** /**
* Use Trinamic's ultra quiet stepping mode. * Use Trinamic's ultra quiet stepping mode.

View file

@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library * You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper). * (https://github.com/teemuatlut/TMC2130Stepper).
* *
* To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins * the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
* You may also use software SPI if you wish to use general purpose IO pins.
*/ */
//#define HAVE_TMC2130 //#define HAVE_TMC2130
@ -1087,9 +1088,13 @@
/** /**
* Use software SPI for TMC2130. * Use software SPI for TMC2130.
* SW SPI pins are defined the respective pins files. * The default SW SPI pins are defined the respective pins files,
* but you can override or define them here.
*/ */
//#define TMC_USE_SW_SPI //#define TMC_USE_SW_SPI
//#define TMC_SW_MOSI -1
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
/** /**
* Use Trinamic's ultra quiet stepping mode. * Use Trinamic's ultra quiet stepping mode.

View file

@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library * You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper). * (https://github.com/teemuatlut/TMC2130Stepper).
* *
* To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins * the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
* You may also use software SPI if you wish to use general purpose IO pins.
*/ */
//#define HAVE_TMC2130 //#define HAVE_TMC2130
@ -1087,9 +1088,13 @@
/** /**
* Use software SPI for TMC2130. * Use software SPI for TMC2130.
* SW SPI pins are defined the respective pins files. * The default SW SPI pins are defined the respective pins files,
* but you can override or define them here.
*/ */
//#define TMC_USE_SW_SPI //#define TMC_USE_SW_SPI
//#define TMC_SW_MOSI -1
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
/** /**
* Use Trinamic's ultra quiet stepping mode. * Use Trinamic's ultra quiet stepping mode.

View file

@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library * You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper). * (https://github.com/teemuatlut/TMC2130Stepper).
* *
* To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins * the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
* You may also use software SPI if you wish to use general purpose IO pins.
*/ */
//#define HAVE_TMC2130 //#define HAVE_TMC2130
@ -1087,9 +1088,13 @@
/** /**
* Use software SPI for TMC2130. * Use software SPI for TMC2130.
* SW SPI pins are defined the respective pins files. * The default SW SPI pins are defined the respective pins files,
* but you can override or define them here.
*/ */
//#define TMC_USE_SW_SPI //#define TMC_USE_SW_SPI
//#define TMC_SW_MOSI -1
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
/** /**
* Use Trinamic's ultra quiet stepping mode. * Use Trinamic's ultra quiet stepping mode.

View file

@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library * You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper). * (https://github.com/teemuatlut/TMC2130Stepper).
* *
* To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins * the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
* You may also use software SPI if you wish to use general purpose IO pins.
*/ */
//#define HAVE_TMC2130 //#define HAVE_TMC2130
@ -1085,6 +1086,16 @@
#define E4_CURRENT 800 #define E4_CURRENT 800
#define E4_MICROSTEPS 16 #define E4_MICROSTEPS 16
/**
* Use software SPI for TMC2130.
* The default SW SPI pins are defined the respective pins files,
* but you can override or define them here.
*/
//#define TMC_USE_SW_SPI
//#define TMC_SW_MOSI -1
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
/** /**
* Use Trinamic's ultra quiet stepping mode. * Use Trinamic's ultra quiet stepping mode.
* When disabled, Marlin will use spreadCycle stepping mode. * When disabled, Marlin will use spreadCycle stepping mode.

View file

@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library * You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper). * (https://github.com/teemuatlut/TMC2130Stepper).
* *
* To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins * the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
* You may also use software SPI if you wish to use general purpose IO pins.
*/ */
//#define HAVE_TMC2130 //#define HAVE_TMC2130
@ -1085,6 +1086,16 @@
#define E4_CURRENT 800 #define E4_CURRENT 800
#define E4_MICROSTEPS 16 #define E4_MICROSTEPS 16
/**
* Use software SPI for TMC2130.
* The default SW SPI pins are defined the respective pins files,
* but you can override or define them here.
*/
//#define TMC_USE_SW_SPI
//#define TMC_SW_MOSI -1
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
/** /**
* Use Trinamic's ultra quiet stepping mode. * Use Trinamic's ultra quiet stepping mode.
* When disabled, Marlin will use spreadCycle stepping mode. * When disabled, Marlin will use spreadCycle stepping mode.

View file

@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library * You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper). * (https://github.com/teemuatlut/TMC2130Stepper).
* *
* To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins * the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
* You may also use software SPI if you wish to use general purpose IO pins.
*/ */
//#define HAVE_TMC2130 //#define HAVE_TMC2130
@ -1087,9 +1088,13 @@
/** /**
* Use software SPI for TMC2130. * Use software SPI for TMC2130.
* SW SPI pins are defined the respective pins files. * The default SW SPI pins are defined the respective pins files,
* but you can override or define them here.
*/ */
//#define TMC_USE_SW_SPI //#define TMC_USE_SW_SPI
//#define TMC_SW_MOSI -1
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
/** /**
* Use Trinamic's ultra quiet stepping mode. * Use Trinamic's ultra quiet stepping mode.

View file

@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library * You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper). * (https://github.com/teemuatlut/TMC2130Stepper).
* *
* To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins * the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
* You may also use software SPI if you wish to use general purpose IO pins.
*/ */
//#define HAVE_TMC2130 //#define HAVE_TMC2130
@ -1087,9 +1088,13 @@
/** /**
* Use software SPI for TMC2130. * Use software SPI for TMC2130.
* SW SPI pins are defined the respective pins files. * The default SW SPI pins are defined the respective pins files,
* but you can override or define them here.
*/ */
//#define TMC_USE_SW_SPI //#define TMC_USE_SW_SPI
//#define TMC_SW_MOSI -1
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
/** /**
* Use Trinamic's ultra quiet stepping mode. * Use Trinamic's ultra quiet stepping mode.

View file

@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library * You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper). * (https://github.com/teemuatlut/TMC2130Stepper).
* *
* To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins * the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
* You may also use software SPI if you wish to use general purpose IO pins.
*/ */
//#define HAVE_TMC2130 //#define HAVE_TMC2130
@ -1087,9 +1088,13 @@
/** /**
* Use software SPI for TMC2130. * Use software SPI for TMC2130.
* SW SPI pins are defined the respective pins files. * The default SW SPI pins are defined the respective pins files,
* but you can override or define them here.
*/ */
//#define TMC_USE_SW_SPI //#define TMC_USE_SW_SPI
//#define TMC_SW_MOSI -1
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
/** /**
* Use Trinamic's ultra quiet stepping mode. * Use Trinamic's ultra quiet stepping mode.

View file

@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library * You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper). * (https://github.com/teemuatlut/TMC2130Stepper).
* *
* To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins * the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
* You may also use software SPI if you wish to use general purpose IO pins.
*/ */
//#define HAVE_TMC2130 //#define HAVE_TMC2130
@ -1085,6 +1086,16 @@
#define E4_CURRENT 800 #define E4_CURRENT 800
#define E4_MICROSTEPS 16 #define E4_MICROSTEPS 16
/**
* Use software SPI for TMC2130.
* The default SW SPI pins are defined the respective pins files,
* but you can override or define them here.
*/
//#define TMC_USE_SW_SPI
//#define TMC_SW_MOSI -1
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
/** /**
* Use Trinamic's ultra quiet stepping mode. * Use Trinamic's ultra quiet stepping mode.
* When disabled, Marlin will use spreadCycle stepping mode. * When disabled, Marlin will use spreadCycle stepping mode.

View file

@ -1000,9 +1000,10 @@
* You'll also need the TMC2130Stepper Arduino library * You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper). * (https://github.com/teemuatlut/TMC2130Stepper).
* *
* To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins * the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
* You may also use software SPI if you wish to use general purpose IO pins.
*/ */
//#define HAVE_TMC2130 //#define HAVE_TMC2130
@ -1088,9 +1089,13 @@
/** /**
* Use software SPI for TMC2130. * Use software SPI for TMC2130.
* SW SPI pins are defined the respective pins files. * The default SW SPI pins are defined the respective pins files,
* but you can override or define them here.
*/ */
//#define TMC_USE_SW_SPI //#define TMC_USE_SW_SPI
//#define TMC_SW_MOSI -1
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
/** /**
* Use Trinamic's ultra quiet stepping mode. * Use Trinamic's ultra quiet stepping mode.

View file

@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library * You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper). * (https://github.com/teemuatlut/TMC2130Stepper).
* *
* To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins * the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
* You may also use software SPI if you wish to use general purpose IO pins.
*/ */
//#define HAVE_TMC2130 //#define HAVE_TMC2130
@ -1087,9 +1088,13 @@
/** /**
* Use software SPI for TMC2130. * Use software SPI for TMC2130.
* SW SPI pins are defined the respective pins files. * The default SW SPI pins are defined the respective pins files,
* but you can override or define them here.
*/ */
//#define TMC_USE_SW_SPI //#define TMC_USE_SW_SPI
//#define TMC_SW_MOSI -1
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
/** /**
* Use Trinamic's ultra quiet stepping mode. * Use Trinamic's ultra quiet stepping mode.

View file

@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library * You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper). * (https://github.com/teemuatlut/TMC2130Stepper).
* *
* To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins * the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
* You may also use software SPI if you wish to use general purpose IO pins.
*/ */
//#define HAVE_TMC2130 //#define HAVE_TMC2130
@ -1087,9 +1088,13 @@
/** /**
* Use software SPI for TMC2130. * Use software SPI for TMC2130.
* SW SPI pins are defined the respective pins files. * The default SW SPI pins are defined the respective pins files,
* but you can override or define them here.
*/ */
//#define TMC_USE_SW_SPI //#define TMC_USE_SW_SPI
//#define TMC_SW_MOSI -1
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
/** /**
* Use Trinamic's ultra quiet stepping mode. * Use Trinamic's ultra quiet stepping mode.

View file

@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library * You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper). * (https://github.com/teemuatlut/TMC2130Stepper).
* *
* To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins * the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
* You may also use software SPI if you wish to use general purpose IO pins.
*/ */
//#define HAVE_TMC2130 //#define HAVE_TMC2130
@ -1087,9 +1088,13 @@
/** /**
* Use software SPI for TMC2130. * Use software SPI for TMC2130.
* SW SPI pins are defined the respective pins files. * The default SW SPI pins are defined the respective pins files,
* but you can override or define them here.
*/ */
//#define TMC_USE_SW_SPI //#define TMC_USE_SW_SPI
//#define TMC_SW_MOSI -1
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
/** /**
* Use Trinamic's ultra quiet stepping mode. * Use Trinamic's ultra quiet stepping mode.

View file

@ -1007,9 +1007,10 @@
* You'll also need the TMC2130Stepper Arduino library * You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper). * (https://github.com/teemuatlut/TMC2130Stepper).
* *
* To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins * the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
* You may also use software SPI if you wish to use general purpose IO pins.
*/ */
//#define HAVE_TMC2130 //#define HAVE_TMC2130
@ -1095,9 +1096,13 @@
/** /**
* Use software SPI for TMC2130. * Use software SPI for TMC2130.
* SW SPI pins are defined the respective pins files. * The default SW SPI pins are defined the respective pins files,
* but you can override or define them here.
*/ */
//#define TMC_USE_SW_SPI //#define TMC_USE_SW_SPI
//#define TMC_SW_MOSI -1
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
/** /**
* Use Trinamic's ultra quiet stepping mode. * Use Trinamic's ultra quiet stepping mode.

View file

@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library * You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper). * (https://github.com/teemuatlut/TMC2130Stepper).
* *
* To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins * the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
* You may also use software SPI if you wish to use general purpose IO pins.
*/ */
//#define HAVE_TMC2130 //#define HAVE_TMC2130
@ -1087,9 +1088,13 @@
/** /**
* Use software SPI for TMC2130. * Use software SPI for TMC2130.
* SW SPI pins are defined the respective pins files. * The default SW SPI pins are defined the respective pins files,
* but you can override or define them here.
*/ */
//#define TMC_USE_SW_SPI //#define TMC_USE_SW_SPI
//#define TMC_SW_MOSI -1
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
/** /**
* Use Trinamic's ultra quiet stepping mode. * Use Trinamic's ultra quiet stepping mode.

View file

@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library * You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper). * (https://github.com/teemuatlut/TMC2130Stepper).
* *
* To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins * the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
* You may also use software SPI if you wish to use general purpose IO pins.
*/ */
//#define HAVE_TMC2130 //#define HAVE_TMC2130
@ -1087,9 +1088,13 @@
/** /**
* Use software SPI for TMC2130. * Use software SPI for TMC2130.
* SW SPI pins are defined the respective pins files. * The default SW SPI pins are defined the respective pins files,
* but you can override or define them here.
*/ */
//#define TMC_USE_SW_SPI //#define TMC_USE_SW_SPI
//#define TMC_SW_MOSI -1
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
/** /**
* Use Trinamic's ultra quiet stepping mode. * Use Trinamic's ultra quiet stepping mode.

View file

@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library * You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper). * (https://github.com/teemuatlut/TMC2130Stepper).
* *
* To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins * the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
* You may also use software SPI if you wish to use general purpose IO pins.
*/ */
//#define HAVE_TMC2130 //#define HAVE_TMC2130
@ -1087,9 +1088,13 @@
/** /**
* Use software SPI for TMC2130. * Use software SPI for TMC2130.
* SW SPI pins are defined the respective pins files. * The default SW SPI pins are defined the respective pins files,
* but you can override or define them here.
*/ */
//#define TMC_USE_SW_SPI //#define TMC_USE_SW_SPI
//#define TMC_SW_MOSI -1
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
/** /**
* Use Trinamic's ultra quiet stepping mode. * Use Trinamic's ultra quiet stepping mode.

View file

@ -996,9 +996,10 @@
* You'll also need the TMC2130Stepper Arduino library * You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper). * (https://github.com/teemuatlut/TMC2130Stepper).
* *
* To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins * the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
* You may also use software SPI if you wish to use general purpose IO pins.
*/ */
//#define HAVE_TMC2130 //#define HAVE_TMC2130
@ -1082,6 +1083,16 @@
#define E4_CURRENT 800 #define E4_CURRENT 800
#define E4_MICROSTEPS 16 #define E4_MICROSTEPS 16
/**
* Use software SPI for TMC2130.
* The default SW SPI pins are defined the respective pins files,
* but you can override or define them here.
*/
//#define TMC_USE_SW_SPI
//#define TMC_SW_MOSI -1
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
/** /**
* Use Trinamic's ultra quiet stepping mode. * Use Trinamic's ultra quiet stepping mode.
* When disabled, Marlin will use spreadCycle stepping mode. * When disabled, Marlin will use spreadCycle stepping mode.

View file

@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library * You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper). * (https://github.com/teemuatlut/TMC2130Stepper).
* *
* To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins * the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
* You may also use software SPI if you wish to use general purpose IO pins.
*/ */
//#define HAVE_TMC2130 //#define HAVE_TMC2130
@ -1087,9 +1088,13 @@
/** /**
* Use software SPI for TMC2130. * Use software SPI for TMC2130.
* SW SPI pins are defined the respective pins files. * The default SW SPI pins are defined the respective pins files,
* but you can override or define them here.
*/ */
//#define TMC_USE_SW_SPI //#define TMC_USE_SW_SPI
//#define TMC_SW_MOSI -1
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
/** /**
* Use Trinamic's ultra quiet stepping mode. * Use Trinamic's ultra quiet stepping mode.

View file

@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library * You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper). * (https://github.com/teemuatlut/TMC2130Stepper).
* *
* To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins * the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
* You may also use software SPI if you wish to use general purpose IO pins.
*/ */
//#define HAVE_TMC2130 //#define HAVE_TMC2130
@ -1087,9 +1088,13 @@
/** /**
* Use software SPI for TMC2130. * Use software SPI for TMC2130.
* SW SPI pins are defined the respective pins files. * The default SW SPI pins are defined the respective pins files,
* but you can override or define them here.
*/ */
//#define TMC_USE_SW_SPI //#define TMC_USE_SW_SPI
//#define TMC_SW_MOSI -1
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
/** /**
* Use Trinamic's ultra quiet stepping mode. * Use Trinamic's ultra quiet stepping mode.

View file

@ -1012,9 +1012,10 @@
* You'll also need the TMC2130Stepper Arduino library * You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper). * (https://github.com/teemuatlut/TMC2130Stepper).
* *
* To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins * the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
* You may also use software SPI if you wish to use general purpose IO pins.
*/ */
//#define HAVE_TMC2130 //#define HAVE_TMC2130
@ -1100,9 +1101,13 @@
/** /**
* Use software SPI for TMC2130. * Use software SPI for TMC2130.
* SW SPI pins are defined the respective pins files. * The default SW SPI pins are defined the respective pins files,
* but you can override or define them here.
*/ */
//#define TMC_USE_SW_SPI //#define TMC_USE_SW_SPI
//#define TMC_SW_MOSI -1
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
/** /**
* Use Trinamic's ultra quiet stepping mode. * Use Trinamic's ultra quiet stepping mode.

View file

@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library * You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper). * (https://github.com/teemuatlut/TMC2130Stepper).
* *
* To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins * the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
* You may also use software SPI if you wish to use general purpose IO pins.
*/ */
//#define HAVE_TMC2130 //#define HAVE_TMC2130
@ -1087,9 +1088,13 @@
/** /**
* Use software SPI for TMC2130. * Use software SPI for TMC2130.
* SW SPI pins are defined the respective pins files. * The default SW SPI pins are defined the respective pins files,
* but you can override or define them here.
*/ */
//#define TMC_USE_SW_SPI //#define TMC_USE_SW_SPI
//#define TMC_SW_MOSI -1
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
/** /**
* Use Trinamic's ultra quiet stepping mode. * Use Trinamic's ultra quiet stepping mode.

View file

@ -1001,9 +1001,10 @@
* You'll also need the TMC2130Stepper Arduino library * You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper). * (https://github.com/teemuatlut/TMC2130Stepper).
* *
* To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins * the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
* You may also use software SPI if you wish to use general purpose IO pins.
*/ */
//#define HAVE_TMC2130 //#define HAVE_TMC2130
@ -1089,9 +1090,13 @@
/** /**
* Use software SPI for TMC2130. * Use software SPI for TMC2130.
* SW SPI pins are defined the respective pins files. * The default SW SPI pins are defined the respective pins files,
* but you can override or define them here.
*/ */
//#define TMC_USE_SW_SPI //#define TMC_USE_SW_SPI
//#define TMC_SW_MOSI -1
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
/** /**
* Use Trinamic's ultra quiet stepping mode. * Use Trinamic's ultra quiet stepping mode.

View file

@ -1001,9 +1001,10 @@
* You'll also need the TMC2130Stepper Arduino library * You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper). * (https://github.com/teemuatlut/TMC2130Stepper).
* *
* To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins * the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
* You may also use software SPI if you wish to use general purpose IO pins.
*/ */
//#define HAVE_TMC2130 //#define HAVE_TMC2130
@ -1089,9 +1090,13 @@
/** /**
* Use software SPI for TMC2130. * Use software SPI for TMC2130.
* SW SPI pins are defined the respective pins files. * The default SW SPI pins are defined the respective pins files,
* but you can override or define them here.
*/ */
//#define TMC_USE_SW_SPI //#define TMC_USE_SW_SPI
//#define TMC_SW_MOSI -1
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
/** /**
* Use Trinamic's ultra quiet stepping mode. * Use Trinamic's ultra quiet stepping mode.

View file

@ -1001,9 +1001,10 @@
* You'll also need the TMC2130Stepper Arduino library * You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper). * (https://github.com/teemuatlut/TMC2130Stepper).
* *
* To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins * the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
* You may also use software SPI if you wish to use general purpose IO pins.
*/ */
//#define HAVE_TMC2130 //#define HAVE_TMC2130
@ -1087,6 +1088,16 @@
#define E4_CURRENT 800 #define E4_CURRENT 800
#define E4_MICROSTEPS 16 #define E4_MICROSTEPS 16
/**
* Use software SPI for TMC2130.
* The default SW SPI pins are defined the respective pins files,
* but you can override or define them here.
*/
//#define TMC_USE_SW_SPI
//#define TMC_SW_MOSI -1
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
/** /**
* Use Trinamic's ultra quiet stepping mode. * Use Trinamic's ultra quiet stepping mode.
* When disabled, Marlin will use spreadCycle stepping mode. * When disabled, Marlin will use spreadCycle stepping mode.

View file

@ -1001,9 +1001,10 @@
* You'll also need the TMC2130Stepper Arduino library * You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper). * (https://github.com/teemuatlut/TMC2130Stepper).
* *
* To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins * the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
* You may also use software SPI if you wish to use general purpose IO pins.
*/ */
//#define HAVE_TMC2130 //#define HAVE_TMC2130
@ -1089,9 +1090,13 @@
/** /**
* Use software SPI for TMC2130. * Use software SPI for TMC2130.
* SW SPI pins are defined the respective pins files. * The default SW SPI pins are defined the respective pins files,
* but you can override or define them here.
*/ */
//#define TMC_USE_SW_SPI //#define TMC_USE_SW_SPI
//#define TMC_SW_MOSI -1
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
/** /**
* Use Trinamic's ultra quiet stepping mode. * Use Trinamic's ultra quiet stepping mode.

View file

@ -1001,9 +1001,10 @@
* You'll also need the TMC2130Stepper Arduino library * You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper). * (https://github.com/teemuatlut/TMC2130Stepper).
* *
* To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins * the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
* You may also use software SPI if you wish to use general purpose IO pins.
*/ */
//#define HAVE_TMC2130 //#define HAVE_TMC2130
@ -1089,9 +1090,13 @@
/** /**
* Use software SPI for TMC2130. * Use software SPI for TMC2130.
* SW SPI pins are defined the respective pins files. * The default SW SPI pins are defined the respective pins files,
* but you can override or define them here.
*/ */
//#define TMC_USE_SW_SPI //#define TMC_USE_SW_SPI
//#define TMC_SW_MOSI -1
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
/** /**
* Use Trinamic's ultra quiet stepping mode. * Use Trinamic's ultra quiet stepping mode.

View file

@ -1001,9 +1001,10 @@
* You'll also need the TMC2130Stepper Arduino library * You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper). * (https://github.com/teemuatlut/TMC2130Stepper).
* *
* To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins * the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
* You may also use software SPI if you wish to use general purpose IO pins.
*/ */
//#define HAVE_TMC2130 //#define HAVE_TMC2130
@ -1089,9 +1090,13 @@
/** /**
* Use software SPI for TMC2130. * Use software SPI for TMC2130.
* SW SPI pins are defined the respective pins files. * The default SW SPI pins are defined the respective pins files,
* but you can override or define them here.
*/ */
//#define TMC_USE_SW_SPI //#define TMC_USE_SW_SPI
//#define TMC_SW_MOSI -1
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
/** /**
* Use Trinamic's ultra quiet stepping mode. * Use Trinamic's ultra quiet stepping mode.

View file

@ -1006,9 +1006,10 @@
* You'll also need the TMC2130Stepper Arduino library * You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper). * (https://github.com/teemuatlut/TMC2130Stepper).
* *
* To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins * the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
* You may also use software SPI if you wish to use general purpose IO pins.
*/ */
//#define HAVE_TMC2130 //#define HAVE_TMC2130
@ -1094,9 +1095,13 @@
/** /**
* Use software SPI for TMC2130. * Use software SPI for TMC2130.
* SW SPI pins are defined the respective pins files. * The default SW SPI pins are defined the respective pins files,
* but you can override or define them here.
*/ */
//#define TMC_USE_SW_SPI //#define TMC_USE_SW_SPI
//#define TMC_SW_MOSI -1
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
/** /**
* Use Trinamic's ultra quiet stepping mode. * Use Trinamic's ultra quiet stepping mode.

View file

@ -1001,9 +1001,10 @@
* You'll also need the TMC2130Stepper Arduino library * You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper). * (https://github.com/teemuatlut/TMC2130Stepper).
* *
* To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins * the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
* You may also use software SPI if you wish to use general purpose IO pins.
*/ */
//#define HAVE_TMC2130 //#define HAVE_TMC2130
@ -1089,9 +1090,13 @@
/** /**
* Use software SPI for TMC2130. * Use software SPI for TMC2130.
* SW SPI pins are defined the respective pins files. * The default SW SPI pins are defined the respective pins files,
* but you can override or define them here.
*/ */
//#define TMC_USE_SW_SPI //#define TMC_USE_SW_SPI
//#define TMC_SW_MOSI -1
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
/** /**
* Use Trinamic's ultra quiet stepping mode. * Use Trinamic's ultra quiet stepping mode.

View file

@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library * You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper). * (https://github.com/teemuatlut/TMC2130Stepper).
* *
* To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins * the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
* You may also use software SPI if you wish to use general purpose IO pins.
*/ */
//#define HAVE_TMC2130 //#define HAVE_TMC2130
@ -1087,9 +1088,13 @@
/** /**
* Use software SPI for TMC2130. * Use software SPI for TMC2130.
* SW SPI pins are defined the respective pins files. * The default SW SPI pins are defined the respective pins files,
* but you can override or define them here.
*/ */
//#define TMC_USE_SW_SPI //#define TMC_USE_SW_SPI
//#define TMC_SW_MOSI -1
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
/** /**
* Use Trinamic's ultra quiet stepping mode. * Use Trinamic's ultra quiet stepping mode.

View file

@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library * You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper). * (https://github.com/teemuatlut/TMC2130Stepper).
* *
* To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins * the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
* You may also use software SPI if you wish to use general purpose IO pins.
*/ */
//#define HAVE_TMC2130 //#define HAVE_TMC2130
@ -1087,9 +1088,13 @@
/** /**
* Use software SPI for TMC2130. * Use software SPI for TMC2130.
* SW SPI pins are defined the respective pins files. * The default SW SPI pins are defined the respective pins files,
* but you can override or define them here.
*/ */
//#define TMC_USE_SW_SPI //#define TMC_USE_SW_SPI
//#define TMC_SW_MOSI -1
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
/** /**
* Use Trinamic's ultra quiet stepping mode. * Use Trinamic's ultra quiet stepping mode.

View file

@ -999,9 +999,10 @@
* You'll also need the TMC2130Stepper Arduino library * You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper). * (https://github.com/teemuatlut/TMC2130Stepper).
* *
* To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins * the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
* You may also use software SPI if you wish to use general purpose IO pins.
*/ */
//#define HAVE_TMC2130 //#define HAVE_TMC2130
@ -1087,9 +1088,13 @@
/** /**
* Use software SPI for TMC2130. * Use software SPI for TMC2130.
* SW SPI pins are defined the respective pins files. * The default SW SPI pins are defined the respective pins files,
* but you can override or define them here.
*/ */
//#define TMC_USE_SW_SPI //#define TMC_USE_SW_SPI
//#define TMC_SW_MOSI -1
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
/** /**
* Use Trinamic's ultra quiet stepping mode. * Use Trinamic's ultra quiet stepping mode.

View file

@ -1000,9 +1000,10 @@
* You'll also need the TMC2130Stepper Arduino library * You'll also need the TMC2130Stepper Arduino library
* (https://github.com/teemuatlut/TMC2130Stepper). * (https://github.com/teemuatlut/TMC2130Stepper).
* *
* To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
* the hardware SPI interface on your board and define the required CS pins * the hardware SPI interface on your board and define the required CS pins
* in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
* You may also use software SPI if you wish to use general purpose IO pins.
*/ */
//#define HAVE_TMC2130 //#define HAVE_TMC2130
@ -1088,9 +1089,13 @@
/** /**
* Use software SPI for TMC2130. * Use software SPI for TMC2130.
* SW SPI pins are defined the respective pins files. * The default SW SPI pins are defined the respective pins files,
* but you can override or define them here.
*/ */
//#define TMC_USE_SW_SPI //#define TMC_USE_SW_SPI
//#define TMC_SW_MOSI -1
//#define TMC_SW_MISO -1
//#define TMC_SW_SCK -1
/** /**
* Use Trinamic's ultra quiet stepping mode. * Use Trinamic's ultra quiet stepping mode.