Follow-up the PR #3676(Advance extrusion algorithm – LIN_ADVANCE)

・Update forgotten example configurations
This commit is contained in:
esenapaj 2016-06-15 00:10:15 +09:00
parent 78a48d7e3c
commit 741cda0e47
15 changed files with 135 additions and 0 deletions

View file

@ -445,6 +445,15 @@
#define D_FILAMENT 2.85 #define D_FILAMENT 2.85
#endif #endif
// Implementation of a linear pressure control
// Assumption: advance = k * (delta velocity)
// K=0 means advance disabled. A good value for a gregs wade extruder will be around K=75
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#define LIN_ADVANCE_K 75
#endif
// @section leveling // @section leveling
// Default mesh area is an area with an inset margin on the print area. // Default mesh area is an area with an inset margin on the print area.

View file

@ -445,6 +445,15 @@
#define D_FILAMENT 1.75 #define D_FILAMENT 1.75
#endif #endif
// Implementation of a linear pressure control
// Assumption: advance = k * (delta velocity)
// K=0 means advance disabled. A good value for a gregs wade extruder will be around K=75
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#define LIN_ADVANCE_K 75
#endif
// @section leveling // @section leveling
// Default mesh area is an area with an inset margin on the print area. // Default mesh area is an area with an inset margin on the print area.

View file

@ -445,6 +445,15 @@
#define D_FILAMENT 2.85 #define D_FILAMENT 2.85
#endif #endif
// Implementation of a linear pressure control
// Assumption: advance = k * (delta velocity)
// K=0 means advance disabled. A good value for a gregs wade extruder will be around K=75
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#define LIN_ADVANCE_K 75
#endif
// @section leveling // @section leveling
// Default mesh area is an area with an inset margin on the print area. // Default mesh area is an area with an inset margin on the print area.

View file

@ -451,6 +451,15 @@
#define D_FILAMENT 2.85 #define D_FILAMENT 2.85
#endif #endif
// Implementation of a linear pressure control
// Assumption: advance = k * (delta velocity)
// K=0 means advance disabled. A good value for a gregs wade extruder will be around K=75
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#define LIN_ADVANCE_K 75
#endif
// @section leveling // @section leveling
// Default mesh area is an area with an inset margin on the print area. // Default mesh area is an area with an inset margin on the print area.

View file

@ -445,6 +445,15 @@
#define D_FILAMENT 1.75 #define D_FILAMENT 1.75
#endif #endif
// Implementation of a linear pressure control
// Assumption: advance = k * (delta velocity)
// K=0 means advance disabled. A good value for a gregs wade extruder will be around K=75
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#define LIN_ADVANCE_K 75
#endif
// @section leveling // @section leveling
// Default mesh area is an area with an inset margin on the print area. // Default mesh area is an area with an inset margin on the print area.

View file

@ -445,6 +445,15 @@
#define D_FILAMENT 1.75 #define D_FILAMENT 1.75
#endif #endif
// Implementation of a linear pressure control
// Assumption: advance = k * (delta velocity)
// K=0 means advance disabled. A good value for a gregs wade extruder will be around K=75
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#define LIN_ADVANCE_K 75
#endif
// @section leveling // @section leveling
// Default mesh area is an area with an inset margin on the print area. // Default mesh area is an area with an inset margin on the print area.

View file

@ -453,6 +453,15 @@
#define D_FILAMENT 2.85 #define D_FILAMENT 2.85
#endif #endif
// Implementation of a linear pressure control
// Assumption: advance = k * (delta velocity)
// K=0 means advance disabled. A good value for a gregs wade extruder will be around K=75
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#define LIN_ADVANCE_K 75
#endif
// @section leveling // @section leveling
// Default mesh area is an area with an inset margin on the print area. // Default mesh area is an area with an inset margin on the print area.

View file

@ -445,6 +445,15 @@
#define D_FILAMENT 1.75 #define D_FILAMENT 1.75
#endif #endif
// Implementation of a linear pressure control
// Assumption: advance = k * (delta velocity)
// K=0 means advance disabled. A good value for a gregs wade extruder will be around K=75
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#define LIN_ADVANCE_K 75
#endif
// @section leveling // @section leveling
// Default mesh area is an area with an inset margin on the print area. // Default mesh area is an area with an inset margin on the print area.

View file

@ -447,6 +447,15 @@
#define D_FILAMENT 2.85 #define D_FILAMENT 2.85
#endif #endif
// Implementation of a linear pressure control
// Assumption: advance = k * (delta velocity)
// K=0 means advance disabled. A good value for a gregs wade extruder will be around K=75
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#define LIN_ADVANCE_K 75
#endif
// @section leveling // @section leveling
// Default mesh area is an area with an inset margin on the print area. // Default mesh area is an area with an inset margin on the print area.

View file

@ -447,6 +447,15 @@
#define D_FILAMENT 2.85 #define D_FILAMENT 2.85
#endif #endif
// Implementation of a linear pressure control
// Assumption: advance = k * (delta velocity)
// K=0 means advance disabled. A good value for a gregs wade extruder will be around K=75
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#define LIN_ADVANCE_K 75
#endif
// @section leveling // @section leveling
// Default mesh area is an area with an inset margin on the print area. // Default mesh area is an area with an inset margin on the print area.

View file

@ -446,6 +446,15 @@
#define D_FILAMENT 2.85 #define D_FILAMENT 2.85
#endif #endif
// Implementation of a linear pressure control
// Assumption: advance = k * (delta velocity)
// K=0 means advance disabled. A good value for a gregs wade extruder will be around K=75
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#define LIN_ADVANCE_K 75
#endif
// @section leveling // @section leveling
// Default mesh area is an area with an inset margin on the print area. // Default mesh area is an area with an inset margin on the print area.

View file

@ -451,6 +451,15 @@
#define D_FILAMENT 2.85 #define D_FILAMENT 2.85
#endif #endif
// Implementation of a linear pressure control
// Assumption: advance = k * (delta velocity)
// K=0 means advance disabled. A good value for a gregs wade extruder will be around K=75
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#define LIN_ADVANCE_K 75
#endif
// @section leveling // @section leveling
// Default mesh area is an area with an inset margin on the print area. // Default mesh area is an area with an inset margin on the print area.

View file

@ -447,6 +447,15 @@
#define D_FILAMENT 2.85 #define D_FILAMENT 2.85
#endif #endif
// Implementation of a linear pressure control
// Assumption: advance = k * (delta velocity)
// K=0 means advance disabled. A good value for a gregs wade extruder will be around K=75
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#define LIN_ADVANCE_K 75
#endif
// @section leveling // @section leveling
// Default mesh area is an area with an inset margin on the print area. // Default mesh area is an area with an inset margin on the print area.

View file

@ -445,6 +445,15 @@
#define D_FILAMENT 2.85 #define D_FILAMENT 2.85
#endif #endif
// Implementation of a linear pressure control
// Assumption: advance = k * (delta velocity)
// K=0 means advance disabled. A good value for a gregs wade extruder will be around K=75
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#define LIN_ADVANCE_K 75
#endif
// @section leveling // @section leveling
// Default mesh area is an area with an inset margin on the print area. // Default mesh area is an area with an inset margin on the print area.

View file

@ -445,6 +445,15 @@
#define D_FILAMENT 2.85 #define D_FILAMENT 2.85
#endif #endif
// Implementation of a linear pressure control
// Assumption: advance = k * (delta velocity)
// K=0 means advance disabled. A good value for a gregs wade extruder will be around K=75
//#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
#define LIN_ADVANCE_K 75
#endif
// @section leveling // @section leveling
// Default mesh area is an area with an inset margin on the print area. // Default mesh area is an area with an inset margin on the print area.