Added teensylu pins
This commit is contained in:
Erik van der Zalm
parent
1d171e9e52
commit
76b3f805c0
2 changed files with 695 additions and 639 deletions
|
|
@ -14,8 +14,9 @@
|
||||||
// Gen6 = 5,
|
// Gen6 = 5,
|
||||||
// Sanguinololu 1.2 and above = 62
|
// Sanguinololu 1.2 and above = 62
|
||||||
// Ultimaker = 7,
|
// Ultimaker = 7,
|
||||||
|
// Teensylu = 8
|
||||||
#define MOTHERBOARD 7
|
#define MOTHERBOARD 7
|
||||||
//#define MOTHERBOARD 5
|
|
||||||
|
|
||||||
|
|
||||||
//// Thermistor settings:
|
//// Thermistor settings:
|
||||||
|
|
@ -58,7 +59,6 @@ const bool ENDSTOPS_INVERTING = true; // set to true to invert the logic of the
|
||||||
|
|
||||||
// #define ULTRA_LCD //any lcd
|
// #define ULTRA_LCD //any lcd
|
||||||
|
|
||||||
#define ULTIPANEL
|
|
||||||
#define ULTIPANEL
|
#define ULTIPANEL
|
||||||
#ifdef ULTIPANEL
|
#ifdef ULTIPANEL
|
||||||
//#define NEWPANEL //enable this if you have a click-encoder panel
|
//#define NEWPANEL //enable this if you have a click-encoder panel
|
||||||
|
|
|
||||||
1330
Marlin/pins.h
1330
Marlin/pins.h
|
|
@ -1,638 +1,694 @@
|
||||||
#ifndef PINS_H
|
#ifndef PINS_H
|
||||||
#define PINS_H
|
#define PINS_H
|
||||||
|
|
||||||
/****************************************************************************************
|
/****************************************************************************************
|
||||||
* Arduino pin assignment
|
* Arduino pin assignment
|
||||||
*
|
*
|
||||||
* ATMega168
|
* ATMega168
|
||||||
* +-\/-+
|
* +-\/-+
|
||||||
* PC6 1| |28 PC5 (AI 5 / D19)
|
* PC6 1| |28 PC5 (AI 5 / D19)
|
||||||
* (D 0) PD0 2| |27 PC4 (AI 4 / D18)
|
* (D 0) PD0 2| |27 PC4 (AI 4 / D18)
|
||||||
* (D 1) PD1 3| |26 PC3 (AI 3 / D17)
|
* (D 1) PD1 3| |26 PC3 (AI 3 / D17)
|
||||||
* (D 2) PD2 4| |25 PC2 (AI 2 / D16)
|
* (D 2) PD2 4| |25 PC2 (AI 2 / D16)
|
||||||
* PWM+ (D 3) PD3 5| |24 PC1 (AI 1 / D15)
|
* PWM+ (D 3) PD3 5| |24 PC1 (AI 1 / D15)
|
||||||
* (D 4) PD4 6| |23 PC0 (AI 0 / D14)
|
* (D 4) PD4 6| |23 PC0 (AI 0 / D14)
|
||||||
* VCC 7| |22 GND
|
* VCC 7| |22 GND
|
||||||
* GND 8| |21 AREF
|
* GND 8| |21 AREF
|
||||||
* PB6 9| |20 AVCC
|
* PB6 9| |20 AVCC
|
||||||
* PB7 10| |19 PB5 (D 13)
|
* PB7 10| |19 PB5 (D 13)
|
||||||
* PWM+ (D 5) PD5 11| |18 PB4 (D 12)
|
* PWM+ (D 5) PD5 11| |18 PB4 (D 12)
|
||||||
* PWM+ (D 6) PD6 12| |17 PB3 (D 11) PWM
|
* PWM+ (D 6) PD6 12| |17 PB3 (D 11) PWM
|
||||||
* (D 7) PD7 13| |16 PB2 (D 10) PWM
|
* (D 7) PD7 13| |16 PB2 (D 10) PWM
|
||||||
* (D 8) PB0 14| |15 PB1 (D 9) PWM
|
* (D 8) PB0 14| |15 PB1 (D 9) PWM
|
||||||
* +----+
|
* +----+
|
||||||
****************************************************************************************/
|
****************************************************************************************/
|
||||||
#if MOTHERBOARD == 0
|
#if MOTHERBOARD == 0
|
||||||
#define KNOWN_BOARD 1
|
#define KNOWN_BOARD 1
|
||||||
|
|
||||||
#ifndef __AVR_ATmega168__
|
#ifndef __AVR_ATmega168__
|
||||||
#error Oops! Make sure you have 'Arduino Diecimila' selected from the boards menu.
|
#error Oops! Make sure you have 'Arduino Diecimila' selected from the boards menu.
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#define X_STEP_PIN 2
|
#define X_STEP_PIN 2
|
||||||
#define X_DIR_PIN 3
|
#define X_DIR_PIN 3
|
||||||
#define X_ENABLE_PIN -1
|
#define X_ENABLE_PIN -1
|
||||||
#define X_MIN_PIN 4
|
#define X_MIN_PIN 4
|
||||||
#define X_MAX_PIN 9
|
#define X_MAX_PIN 9
|
||||||
|
|
||||||
#define Y_STEP_PIN 10
|
#define Y_STEP_PIN 10
|
||||||
#define Y_DIR_PIN 7
|
#define Y_DIR_PIN 7
|
||||||
#define Y_ENABLE_PIN -1
|
#define Y_ENABLE_PIN -1
|
||||||
#define Y_MIN_PIN 8
|
#define Y_MIN_PIN 8
|
||||||
#define Y_MAX_PIN 13
|
#define Y_MAX_PIN 13
|
||||||
|
|
||||||
#define Z_STEP_PIN 19
|
#define Z_STEP_PIN 19
|
||||||
#define Z_DIR_PIN 18
|
#define Z_DIR_PIN 18
|
||||||
#define Z_ENABLE_PIN 5
|
#define Z_ENABLE_PIN 5
|
||||||
#define Z_MIN_PIN 17
|
#define Z_MIN_PIN 17
|
||||||
#define Z_MAX_PIN 16
|
#define Z_MAX_PIN 16
|
||||||
|
|
||||||
#define E_STEP_PIN 11
|
#define E_STEP_PIN 11
|
||||||
#define E_DIR_PIN 12
|
#define E_DIR_PIN 12
|
||||||
#define E_ENABLE_PIN -1
|
#define E_ENABLE_PIN -1
|
||||||
|
|
||||||
#define SDPOWER -1
|
#define SDPOWER -1
|
||||||
#define SDSS -1
|
#define SDSS -1
|
||||||
#define LED_PIN -1
|
#define LED_PIN -1
|
||||||
#define FAN_PIN -1
|
#define FAN_PIN -1
|
||||||
#define PS_ON_PIN 15
|
#define PS_ON_PIN 15
|
||||||
#define KILL_PIN -1
|
#define KILL_PIN -1
|
||||||
|
|
||||||
#define HEATER_0_PIN 6
|
#define HEATER_0_PIN 6
|
||||||
#define TEMP_0_PIN 0 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
|
#define TEMP_0_PIN 0 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
|
||||||
#define HEATER_1_PIN -1
|
#define HEATER_1_PIN -1
|
||||||
#define HEATER_2_PIN -1
|
#define HEATER_2_PIN -1
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
/****************************************************************************************
|
/****************************************************************************************
|
||||||
* Sanguino/RepRap Motherboard with direct-drive extruders
|
* Sanguino/RepRap Motherboard with direct-drive extruders
|
||||||
*
|
*
|
||||||
* ATMega644P
|
* ATMega644P
|
||||||
*
|
*
|
||||||
* +---\/---+
|
* +---\/---+
|
||||||
* (D 0) PB0 1| |40 PA0 (AI 0 / D31)
|
* (D 0) PB0 1| |40 PA0 (AI 0 / D31)
|
||||||
* (D 1) PB1 2| |39 PA1 (AI 1 / D30)
|
* (D 1) PB1 2| |39 PA1 (AI 1 / D30)
|
||||||
* INT2 (D 2) PB2 3| |38 PA2 (AI 2 / D29)
|
* INT2 (D 2) PB2 3| |38 PA2 (AI 2 / D29)
|
||||||
* PWM (D 3) PB3 4| |37 PA3 (AI 3 / D28)
|
* PWM (D 3) PB3 4| |37 PA3 (AI 3 / D28)
|
||||||
* PWM (D 4) PB4 5| |36 PA4 (AI 4 / D27)
|
* PWM (D 4) PB4 5| |36 PA4 (AI 4 / D27)
|
||||||
* MOSI (D 5) PB5 6| |35 PA5 (AI 5 / D26)
|
* MOSI (D 5) PB5 6| |35 PA5 (AI 5 / D26)
|
||||||
* MISO (D 6) PB6 7| |34 PA6 (AI 6 / D25)
|
* MISO (D 6) PB6 7| |34 PA6 (AI 6 / D25)
|
||||||
* SCK (D 7) PB7 8| |33 PA7 (AI 7 / D24)
|
* SCK (D 7) PB7 8| |33 PA7 (AI 7 / D24)
|
||||||
* RST 9| |32 AREF
|
* RST 9| |32 AREF
|
||||||
* VCC 10| |31 GND
|
* VCC 10| |31 GND
|
||||||
* GND 11| |30 AVCC
|
* GND 11| |30 AVCC
|
||||||
* XTAL2 12| |29 PC7 (D 23)
|
* XTAL2 12| |29 PC7 (D 23)
|
||||||
* XTAL1 13| |28 PC6 (D 22)
|
* XTAL1 13| |28 PC6 (D 22)
|
||||||
* RX0 (D 8) PD0 14| |27 PC5 (D 21) TDI
|
* RX0 (D 8) PD0 14| |27 PC5 (D 21) TDI
|
||||||
* TX0 (D 9) PD1 15| |26 PC4 (D 20) TDO
|
* TX0 (D 9) PD1 15| |26 PC4 (D 20) TDO
|
||||||
* INT0 RX1 (D 10) PD2 16| |25 PC3 (D 19) TMS
|
* INT0 RX1 (D 10) PD2 16| |25 PC3 (D 19) TMS
|
||||||
* INT1 TX1 (D 11) PD3 17| |24 PC2 (D 18) TCK
|
* INT1 TX1 (D 11) PD3 17| |24 PC2 (D 18) TCK
|
||||||
* PWM (D 12) PD4 18| |23 PC1 (D 17) SDA
|
* PWM (D 12) PD4 18| |23 PC1 (D 17) SDA
|
||||||
* PWM (D 13) PD5 19| |22 PC0 (D 16) SCL
|
* PWM (D 13) PD5 19| |22 PC0 (D 16) SCL
|
||||||
* PWM (D 14) PD6 20| |21 PD7 (D 15) PWM
|
* PWM (D 14) PD6 20| |21 PD7 (D 15) PWM
|
||||||
* +--------+
|
* +--------+
|
||||||
*
|
*
|
||||||
****************************************************************************************/
|
****************************************************************************************/
|
||||||
#if MOTHERBOARD == 1
|
#if MOTHERBOARD == 1
|
||||||
#define KNOWN_BOARD 1
|
#define KNOWN_BOARD 1
|
||||||
|
|
||||||
#ifndef __AVR_ATmega644P__
|
#ifndef __AVR_ATmega644P__
|
||||||
#error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu.
|
#error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu.
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#define X_STEP_PIN 15
|
#define X_STEP_PIN 15
|
||||||
#define X_DIR_PIN 18
|
#define X_DIR_PIN 18
|
||||||
#define X_ENABLE_PIN 19
|
#define X_ENABLE_PIN 19
|
||||||
#define X_MIN_PIN 20
|
#define X_MIN_PIN 20
|
||||||
#define X_MAX_PIN 21
|
#define X_MAX_PIN 21
|
||||||
|
|
||||||
#define Y_STEP_PIN 23
|
#define Y_STEP_PIN 23
|
||||||
#define Y_DIR_PIN 22
|
#define Y_DIR_PIN 22
|
||||||
#define Y_ENABLE_PIN 19
|
#define Y_ENABLE_PIN 19
|
||||||
#define Y_MIN_PIN 25
|
#define Y_MIN_PIN 25
|
||||||
#define Y_MAX_PIN 26
|
#define Y_MAX_PIN 26
|
||||||
|
|
||||||
#define Z_STEP_PIN 29
|
#define Z_STEP_PIN 29
|
||||||
#define Z_DIR_PIN 30
|
#define Z_DIR_PIN 30
|
||||||
#define Z_ENABLE_PIN 31
|
#define Z_ENABLE_PIN 31
|
||||||
#define Z_MIN_PIN 2
|
#define Z_MIN_PIN 2
|
||||||
#define Z_MAX_PIN 1
|
#define Z_MAX_PIN 1
|
||||||
|
|
||||||
#define E_STEP_PIN 12
|
#define E_STEP_PIN 12
|
||||||
#define E_DIR_PIN 16
|
#define E_DIR_PIN 16
|
||||||
#define E_ENABLE_PIN 3
|
#define E_ENABLE_PIN 3
|
||||||
|
|
||||||
#define SDPOWER -1
|
#define SDPOWER -1
|
||||||
#define SDSS -1
|
#define SDSS -1
|
||||||
#define LED_PIN 0
|
#define LED_PIN 0
|
||||||
#define FAN_PIN -1
|
#define FAN_PIN -1
|
||||||
#define PS_ON_PIN -1
|
#define PS_ON_PIN -1
|
||||||
#define KILL_PIN -1
|
#define KILL_PIN -1
|
||||||
|
|
||||||
#define HEATER_0_PIN 14
|
#define HEATER_0_PIN 14
|
||||||
#define TEMP_0_PIN 4 //D27 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
|
#define TEMP_0_PIN 4 //D27 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
|
||||||
#define HEATER_1_PIN -1
|
#define HEATER_1_PIN -1
|
||||||
#define HEATER_2_PIN -1
|
#define HEATER_2_PIN -1
|
||||||
/* Unused (1) (2) (3) 4 5 6 7 8 9 10 11 12 13 (14) (15) (16) 17 (18) (19) (20) (21) (22) (23) 24 (25) (26) (27) 28 (29) (30) (31) */
|
/* Unused (1) (2) (3) 4 5 6 7 8 9 10 11 12 13 (14) (15) (16) 17 (18) (19) (20) (21) (22) (23) 24 (25) (26) (27) 28 (29) (30) (31) */
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
|
||||||
/****************************************************************************************
|
/****************************************************************************************
|
||||||
* RepRap Motherboard ****---NOOOOOO RS485/EXTRUDER CONTROLLER!!!!!!!!!!!!!!!!!---*******
|
* RepRap Motherboard ****---NOOOOOO RS485/EXTRUDER CONTROLLER!!!!!!!!!!!!!!!!!---*******
|
||||||
*
|
*
|
||||||
****************************************************************************************/
|
****************************************************************************************/
|
||||||
#if MOTHERBOARD == 2
|
#if MOTHERBOARD == 2
|
||||||
#define KNOWN_BOARD 1
|
#define KNOWN_BOARD 1
|
||||||
|
|
||||||
#ifndef __AVR_ATmega644P__
|
#ifndef __AVR_ATmega644P__
|
||||||
#error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu.
|
#error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu.
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#define X_STEP_PIN 15
|
#define X_STEP_PIN 15
|
||||||
#define X_DIR_PIN 18
|
#define X_DIR_PIN 18
|
||||||
#define X_ENABLE_PIN 19
|
#define X_ENABLE_PIN 19
|
||||||
#define X_MIN_PIN 20
|
#define X_MIN_PIN 20
|
||||||
#define X_MAX_PIN 21
|
#define X_MAX_PIN 21
|
||||||
|
|
||||||
#define Y_STEP_PIN 23
|
#define Y_STEP_PIN 23
|
||||||
#define Y_DIR_PIN 22
|
#define Y_DIR_PIN 22
|
||||||
#define Y_ENABLE_PIN 24
|
#define Y_ENABLE_PIN 24
|
||||||
#define Y_MIN_PIN 25
|
#define Y_MIN_PIN 25
|
||||||
#define Y_MAX_PIN 26
|
#define Y_MAX_PIN 26
|
||||||
|
|
||||||
#define Z_STEP_PINN 27
|
#define Z_STEP_PINN 27
|
||||||
#define Z_DIR_PINN 28
|
#define Z_DIR_PINN 28
|
||||||
#define Z_ENABLE_PIN 29
|
#define Z_ENABLE_PIN 29
|
||||||
#define Z_MIN_PIN 30
|
#define Z_MIN_PIN 30
|
||||||
#define Z_MAX_PIN 31
|
#define Z_MAX_PIN 31
|
||||||
|
|
||||||
#define E_STEP_PIN 17
|
#define E_STEP_PIN 17
|
||||||
#define E_DIR_PIN 16
|
#define E_DIR_PIN 16
|
||||||
#define E_ENABLE_PIN -1
|
#define E_ENABLE_PIN -1
|
||||||
|
|
||||||
#define SDPOWER -1
|
#define SDPOWER -1
|
||||||
#define SDSS 4
|
#define SDSS 4
|
||||||
#define LED_PIN 0
|
#define LED_PIN 0
|
||||||
|
|
||||||
#define SD_CARD_WRITE 2
|
#define SD_CARD_WRITE 2
|
||||||
#define SD_CARD_DETECT 3
|
#define SD_CARD_DETECT 3
|
||||||
#define SD_CARD_SELECT 4
|
#define SD_CARD_SELECT 4
|
||||||
|
|
||||||
//our RS485 pins
|
//our RS485 pins
|
||||||
#define TX_ENABLE_PIN 12
|
#define TX_ENABLE_PIN 12
|
||||||
#define RX_ENABLE_PIN 13
|
#define RX_ENABLE_PIN 13
|
||||||
|
|
||||||
//pin for controlling the PSU.
|
//pin for controlling the PSU.
|
||||||
#define PS_ON_PIN 14
|
#define PS_ON_PIN 14
|
||||||
|
|
||||||
#define FAN_PIN -1
|
#define FAN_PIN -1
|
||||||
#define KILL_PIN -1
|
#define KILL_PIN -1
|
||||||
|
|
||||||
#define HEATER_0_PIN -1
|
#define HEATER_0_PIN -1
|
||||||
#define TEMP_0_PIN -1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
|
#define TEMP_0_PIN -1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
|
||||||
#define HEATER_1_PIN -1
|
#define HEATER_1_PIN -1
|
||||||
#define HEATER_2_PIN -1
|
#define HEATER_2_PIN -1
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
/****************************************************************************************
|
/****************************************************************************************
|
||||||
* Arduino Mega pin assignment
|
* Arduino Mega pin assignment
|
||||||
*
|
*
|
||||||
****************************************************************************************/
|
****************************************************************************************/
|
||||||
#if MOTHERBOARD == 33
|
#if MOTHERBOARD == 33
|
||||||
#define MOTHERBOARD 3
|
#define MOTHERBOARD 3
|
||||||
#define RAMPS_V_1_3
|
#define RAMPS_V_1_3
|
||||||
#endif
|
#endif
|
||||||
#if MOTHERBOARD == 3
|
#if MOTHERBOARD == 3
|
||||||
#define KNOWN_BOARD 1
|
#define KNOWN_BOARD 1
|
||||||
|
|
||||||
//////////////////FIX THIS//////////////
|
//////////////////FIX THIS//////////////
|
||||||
#ifndef __AVR_ATmega1280__
|
#ifndef __AVR_ATmega1280__
|
||||||
#ifndef __AVR_ATmega2560__
|
#ifndef __AVR_ATmega2560__
|
||||||
#error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
|
#error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// uncomment one of the following lines for RAMPS v1.3 or v1.0, comment both for v1.2 or 1.1
|
// uncomment one of the following lines for RAMPS v1.3 or v1.0, comment both for v1.2 or 1.1
|
||||||
// #define RAMPS_V_1_3
|
// #define RAMPS_V_1_3
|
||||||
// #define RAMPS_V_1_0
|
// #define RAMPS_V_1_0
|
||||||
|
|
||||||
#ifdef RAMPS_V_1_3
|
#ifdef RAMPS_V_1_3
|
||||||
|
|
||||||
#define X_STEP_PIN 54
|
#define X_STEP_PIN 54
|
||||||
#define X_DIR_PIN 55
|
#define X_DIR_PIN 55
|
||||||
#define X_ENABLE_PIN 38
|
#define X_ENABLE_PIN 38
|
||||||
#define X_MIN_PIN 3
|
#define X_MIN_PIN 3
|
||||||
#define X_MAX_PIN -1 //2 //Max endstops default to disabled "-1", set to commented value to enable.
|
#define X_MAX_PIN -1 //2 //Max endstops default to disabled "-1", set to commented value to enable.
|
||||||
|
|
||||||
#define Y_STEP_PIN 60
|
#define Y_STEP_PIN 60
|
||||||
#define Y_DIR_PIN 61
|
#define Y_DIR_PIN 61
|
||||||
#define Y_ENABLE_PIN 56
|
#define Y_ENABLE_PIN 56
|
||||||
#define Y_MIN_PIN 14
|
#define Y_MIN_PIN 14
|
||||||
#define Y_MAX_PIN -1 //15
|
#define Y_MAX_PIN -1 //15
|
||||||
|
|
||||||
#define Z_STEP_PIN 46
|
#define Z_STEP_PIN 46
|
||||||
#define Z_DIR_PIN 48
|
#define Z_DIR_PIN 48
|
||||||
#define Z_ENABLE_PIN 62
|
#define Z_ENABLE_PIN 62
|
||||||
#define Z_MIN_PIN 18
|
#define Z_MIN_PIN 18
|
||||||
#define Z_MAX_PIN -1 //19
|
#define Z_MAX_PIN -1 //19
|
||||||
|
|
||||||
#define E_STEP_PIN 26
|
#define E_STEP_PIN 26
|
||||||
#define E_DIR_PIN 28
|
#define E_DIR_PIN 28
|
||||||
#define E_ENABLE_PIN 24
|
#define E_ENABLE_PIN 24
|
||||||
|
|
||||||
#define SDPOWER -1
|
#define SDPOWER -1
|
||||||
#define SDSS 53
|
#define SDSS 53
|
||||||
#define LED_PIN 13
|
#define LED_PIN 13
|
||||||
#define FAN_PIN 9
|
#define FAN_PIN 9
|
||||||
#define PS_ON_PIN 12
|
#define PS_ON_PIN 12
|
||||||
#define KILL_PIN -1
|
#define KILL_PIN -1
|
||||||
|
|
||||||
#define HEATER_0_PIN 10
|
#define HEATER_0_PIN 10
|
||||||
#define HEATER_1_PIN 8
|
#define HEATER_1_PIN 8
|
||||||
#define HEATER_2_PIN -1
|
#define HEATER_2_PIN -1
|
||||||
#define TEMP_0_PIN 13 // ANALOG NUMBERING
|
#define TEMP_0_PIN 13 // ANALOG NUMBERING
|
||||||
#define TEMP_1_PIN 14 // ANALOG NUMBERING
|
#define TEMP_1_PIN 14 // ANALOG NUMBERING
|
||||||
#define TEMP_2_PIN -1 // ANALOG NUMBERING
|
#define TEMP_2_PIN -1 // ANALOG NUMBERING
|
||||||
|
|
||||||
|
|
||||||
#else // RAMPS_V_1_1 or RAMPS_V_1_2 as default
|
#else // RAMPS_V_1_1 or RAMPS_V_1_2 as default
|
||||||
|
|
||||||
#define X_STEP_PIN 26
|
#define X_STEP_PIN 26
|
||||||
#define X_DIR_PIN 28
|
#define X_DIR_PIN 28
|
||||||
#define X_ENABLE_PIN 24
|
#define X_ENABLE_PIN 24
|
||||||
#define X_MIN_PIN 3
|
#define X_MIN_PIN 3
|
||||||
#define X_MAX_PIN -1 //2
|
#define X_MAX_PIN -1 //2
|
||||||
|
|
||||||
#define Y_STEP_PIN 38
|
#define Y_STEP_PIN 38
|
||||||
#define Y_DIR_PIN 40
|
#define Y_DIR_PIN 40
|
||||||
#define Y_ENABLE_PIN 36
|
#define Y_ENABLE_PIN 36
|
||||||
#define Y_MIN_PIN 16
|
#define Y_MIN_PIN 16
|
||||||
#define Y_MAX_PIN -1 //17
|
#define Y_MAX_PIN -1 //17
|
||||||
|
|
||||||
#define Z_STEP_PIN 44
|
#define Z_STEP_PIN 44
|
||||||
#define Z_DIR_PIN 46
|
#define Z_DIR_PIN 46
|
||||||
#define Z_ENABLE_PIN 42
|
#define Z_ENABLE_PIN 42
|
||||||
#define Z_MIN_PIN 18
|
#define Z_MIN_PIN 18
|
||||||
#define Z_MAX_PIN -1 //19
|
#define Z_MAX_PIN -1 //19
|
||||||
|
|
||||||
#define E_STEP_PIN 32
|
#define E_STEP_PIN 32
|
||||||
#define E_DIR_PIN 34
|
#define E_DIR_PIN 34
|
||||||
#define E_ENABLE_PIN 30
|
#define E_ENABLE_PIN 30
|
||||||
|
|
||||||
#define SDPOWER 48
|
#define SDPOWER 48
|
||||||
#define SDSS 53
|
#define SDSS 53
|
||||||
#define LED_PIN 13
|
#define LED_PIN 13
|
||||||
#define PS_ON_PIN -1
|
#define PS_ON_PIN -1
|
||||||
#define KILL_PIN -1
|
#define KILL_PIN -1
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#ifdef RAMPS_V_1_0 // RAMPS_V_1_0
|
#ifdef RAMPS_V_1_0 // RAMPS_V_1_0
|
||||||
#define HEATER_0_PIN 12 // RAMPS 1.0
|
#define HEATER_0_PIN 12 // RAMPS 1.0
|
||||||
#define HEATER_1_PIN -1 // RAMPS 1.0
|
#define HEATER_1_PIN -1 // RAMPS 1.0
|
||||||
#define FAN_PIN 11 // RAMPS 1.0
|
#define FAN_PIN 11 // RAMPS 1.0
|
||||||
|
|
||||||
#else // RAMPS_V_1_1 or RAMPS_V_1_2
|
#else // RAMPS_V_1_1 or RAMPS_V_1_2
|
||||||
#define HEATER_0_PIN 10 // RAMPS 1.1
|
#define HEATER_0_PIN 10 // RAMPS 1.1
|
||||||
#define HEATER_1_PIN 8 // RAMPS 1.1
|
#define HEATER_1_PIN 8 // RAMPS 1.1
|
||||||
#define FAN_PIN 9 // RAMPS 1.1
|
#define FAN_PIN 9 // RAMPS 1.1
|
||||||
#endif
|
#endif
|
||||||
#define HEATER_2_PIN -1
|
#define HEATER_2_PIN -1
|
||||||
#define TEMP_0_PIN 2 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
|
#define TEMP_0_PIN 2 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
|
||||||
#define TEMP_1_PIN 1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
|
#define TEMP_1_PIN 1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
|
||||||
#define TEMP_2_PIN -1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
|
#define TEMP_2_PIN -1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// SPI for Max6675 Thermocouple
|
// SPI for Max6675 Thermocouple
|
||||||
|
|
||||||
#ifndef SDSUPPORT
|
#ifndef SDSUPPORT
|
||||||
// these pins are defined in the SD library if building with SD support #define SCK_PIN 52
|
// these pins are defined in the SD library if building with SD support #define SCK_PIN 52
|
||||||
#define MISO_PIN 50
|
#define MISO_PIN 50
|
||||||
#define MOSI_PIN 51
|
#define MOSI_PIN 51
|
||||||
#define MAX6675_SS 53
|
#define MAX6675_SS 53
|
||||||
#else
|
#else
|
||||||
#define MAX6675_SS 49
|
#define MAX6675_SS 49
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
|
||||||
#endif
|
#endif
|
||||||
/****************************************************************************************
|
/****************************************************************************************
|
||||||
* Duemilanove w/ ATMega328P pin assignment
|
* Duemilanove w/ ATMega328P pin assignment
|
||||||
*
|
*
|
||||||
****************************************************************************************/
|
****************************************************************************************/
|
||||||
#if MOTHERBOARD == 4
|
#if MOTHERBOARD == 4
|
||||||
#define KNOWN_BOARD 1
|
#define KNOWN_BOARD 1
|
||||||
|
|
||||||
#ifndef __AVR_ATmega328P__
|
#ifndef __AVR_ATmega328P__
|
||||||
#error Oops! Make sure you have 'Arduino Duemilanove w/ ATMega328' selected from the 'Tools -> Boards' menu.
|
#error Oops! Make sure you have 'Arduino Duemilanove w/ ATMega328' selected from the 'Tools -> Boards' menu.
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#define X_STEP_PIN 19
|
#define X_STEP_PIN 19
|
||||||
#define X_DIR_PIN 18
|
#define X_DIR_PIN 18
|
||||||
#define X_ENABLE_PIN -1
|
#define X_ENABLE_PIN -1
|
||||||
#define X_MIN_PIN 17
|
#define X_MIN_PIN 17
|
||||||
#define X_MAX_PIN -1
|
#define X_MAX_PIN -1
|
||||||
|
|
||||||
#define Y_STEP_PIN 10
|
#define Y_STEP_PIN 10
|
||||||
#define Y_DIR_PIN 7
|
#define Y_DIR_PIN 7
|
||||||
#define Y_ENABLE_PIN -1
|
#define Y_ENABLE_PIN -1
|
||||||
#define Y_MIN_PIN 8
|
#define Y_MIN_PIN 8
|
||||||
#define Y_MAX_PIN -1
|
#define Y_MAX_PIN -1
|
||||||
|
|
||||||
#define Z_STEP_PIN 13
|
#define Z_STEP_PIN 13
|
||||||
#define Z_DIR_PIN 3
|
#define Z_DIR_PIN 3
|
||||||
#define Z_ENABLE_PIN 2
|
#define Z_ENABLE_PIN 2
|
||||||
#define Z_MIN_PIN 4
|
#define Z_MIN_PIN 4
|
||||||
#define Z_MAX_PIN -1
|
#define Z_MAX_PIN -1
|
||||||
|
|
||||||
#define E_STEP_PIN 11
|
#define E_STEP_PIN 11
|
||||||
#define E_DIR_PIN 12
|
#define E_DIR_PIN 12
|
||||||
#define E_ENABLE_PIN -1
|
#define E_ENABLE_PIN -1
|
||||||
|
|
||||||
#define SDPOWER -1
|
#define SDPOWER -1
|
||||||
#define SDSS -1
|
#define SDSS -1
|
||||||
#define LED_PIN -1
|
#define LED_PIN -1
|
||||||
#define FAN_PIN 5
|
#define FAN_PIN 5
|
||||||
#define PS_ON_PIN -1
|
#define PS_ON_PIN -1
|
||||||
#define KILL_PIN -1
|
#define KILL_PIN -1
|
||||||
|
|
||||||
#define HEATER_0_PIN 6
|
#define HEATER_0_PIN 6
|
||||||
#define TEMP_0_PIN 0 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
|
#define TEMP_0_PIN 0 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
|
||||||
#define HEATER_1_PIN -1
|
#define HEATER_1_PIN -1
|
||||||
#define HEATER_2_PIN -1
|
#define HEATER_2_PIN -1
|
||||||
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
/****************************************************************************************
|
/****************************************************************************************
|
||||||
* Gen6 pin assignment
|
* Gen6 pin assignment
|
||||||
*
|
*
|
||||||
****************************************************************************************/
|
****************************************************************************************/
|
||||||
#if MOTHERBOARD == 5
|
#if MOTHERBOARD == 5
|
||||||
#define KNOWN_BOARD 1
|
#define KNOWN_BOARD 1
|
||||||
|
|
||||||
#ifndef __AVR_ATmega644P__
|
#ifndef __AVR_ATmega644P__
|
||||||
#error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu.
|
#error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu.
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
//x axis pins
|
//x axis pins
|
||||||
#define X_STEP_PIN 15
|
#define X_STEP_PIN 15
|
||||||
#define X_DIR_PIN 18
|
#define X_DIR_PIN 18
|
||||||
#define X_ENABLE_PIN 19
|
#define X_ENABLE_PIN 19
|
||||||
#define X_MIN_PIN 20
|
#define X_MIN_PIN 20
|
||||||
#define X_MAX_PIN -1
|
#define X_MAX_PIN -1
|
||||||
|
|
||||||
//y axis pins
|
//y axis pins
|
||||||
#define Y_STEP_PIN 23
|
#define Y_STEP_PIN 23
|
||||||
#define Y_DIR_PIN 22
|
#define Y_DIR_PIN 22
|
||||||
#define Y_ENABLE_PIN 24
|
#define Y_ENABLE_PIN 24
|
||||||
#define Y_MIN_PIN 25
|
#define Y_MIN_PIN 25
|
||||||
#define Y_MAX_PIN -1
|
#define Y_MAX_PIN -1
|
||||||
|
|
||||||
//z axis pins
|
//z axis pins
|
||||||
#define Z_STEP_PIN 27
|
#define Z_STEP_PIN 27
|
||||||
#define Z_DIR_PIN 28
|
#define Z_DIR_PIN 28
|
||||||
#define Z_ENABLE_PIN 29
|
#define Z_ENABLE_PIN 29
|
||||||
#define Z_MIN_PIN 30
|
#define Z_MIN_PIN 30
|
||||||
#define Z_MAX_PIN -1
|
#define Z_MAX_PIN -1
|
||||||
|
|
||||||
//extruder pins
|
//extruder pins
|
||||||
#define E_STEP_PIN 4 //Edited @ EJE Electronics 20100715
|
#define E_STEP_PIN 4 //Edited @ EJE Electronics 20100715
|
||||||
#define E_DIR_PIN 2 //Edited @ EJE Electronics 20100715
|
#define E_DIR_PIN 2 //Edited @ EJE Electronics 20100715
|
||||||
#define E_ENABLE_PIN 3 //Added @ EJE Electronics 20100715
|
#define E_ENABLE_PIN 3 //Added @ EJE Electronics 20100715
|
||||||
#define TEMP_0_PIN 5 //changed @ rkoeppl 20110410
|
#define TEMP_0_PIN 5 //changed @ rkoeppl 20110410
|
||||||
#define HEATER_0_PIN 14 //changed @ rkoeppl 20110410
|
#define HEATER_0_PIN 14 //changed @ rkoeppl 20110410
|
||||||
#define HEATER_1_PIN -1 //changed @ rkoeppl 20110410
|
#define HEATER_1_PIN -1 //changed @ rkoeppl 20110410
|
||||||
#define HEATER_2_PIN -1
|
#define HEATER_2_PIN -1
|
||||||
|
|
||||||
#define SDPOWER -1
|
#define SDPOWER -1
|
||||||
#define SDSS 17
|
#define SDSS 17
|
||||||
#define LED_PIN -1 //changed @ rkoeppl 20110410
|
#define LED_PIN -1 //changed @ rkoeppl 20110410
|
||||||
#define TEMP_1_PIN -1 //changed @ rkoeppl 20110410
|
#define TEMP_1_PIN -1 //changed @ rkoeppl 20110410
|
||||||
#define TEMP_2_PIN -1
|
#define TEMP_2_PIN -1
|
||||||
#define FAN_PIN -1 //changed @ rkoeppl 20110410
|
#define FAN_PIN -1 //changed @ rkoeppl 20110410
|
||||||
#define PS_ON_PIN -1 //changed @ rkoeppl 20110410
|
#define PS_ON_PIN -1 //changed @ rkoeppl 20110410
|
||||||
//our pin for debugging.
|
//our pin for debugging.
|
||||||
|
|
||||||
#define DEBUG_PIN 0
|
#define DEBUG_PIN 0
|
||||||
|
|
||||||
//our RS485 pins
|
//our RS485 pins
|
||||||
#define TX_ENABLE_PIN 12
|
#define TX_ENABLE_PIN 12
|
||||||
#define RX_ENABLE_PIN 13
|
#define RX_ENABLE_PIN 13
|
||||||
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
/****************************************************************************************
|
/****************************************************************************************
|
||||||
* Sanguinololu pin assignment
|
* Sanguinololu pin assignment
|
||||||
*
|
*
|
||||||
****************************************************************************************/
|
****************************************************************************************/
|
||||||
#if MOTHERBOARD == 62
|
#if MOTHERBOARD == 62
|
||||||
#define MOTHERBOARD 6
|
#define MOTHERBOARD 6
|
||||||
#define SANGUINOLOLU_V_1_2
|
#define SANGUINOLOLU_V_1_2
|
||||||
#endif
|
#endif
|
||||||
#if MOTHERBOARD == 6
|
#if MOTHERBOARD == 6
|
||||||
#define KNOWN_BOARD 1
|
#define KNOWN_BOARD 1
|
||||||
#ifndef __AVR_ATmega644P__
|
#ifndef __AVR_ATmega644P__
|
||||||
#error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu.
|
#error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu.
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#define X_STEP_PIN 15
|
#define X_STEP_PIN 15
|
||||||
#define X_DIR_PIN 21
|
#define X_DIR_PIN 21
|
||||||
#define X_MIN_PIN 18
|
#define X_MIN_PIN 18
|
||||||
#define X_MAX_PIN -2
|
#define X_MAX_PIN -2
|
||||||
|
|
||||||
#define Y_STEP_PIN 22
|
#define Y_STEP_PIN 22
|
||||||
#define Y_DIR_PIN 23
|
#define Y_DIR_PIN 23
|
||||||
#define Y_MIN_PIN 19
|
#define Y_MIN_PIN 19
|
||||||
#define Y_MAX_PIN -1
|
#define Y_MAX_PIN -1
|
||||||
|
|
||||||
#define Z_STEP_PIN 3
|
#define Z_STEP_PIN 3
|
||||||
#define Z_DIR_PIN 2
|
#define Z_DIR_PIN 2
|
||||||
#define Z_MIN_PIN 20
|
#define Z_MIN_PIN 20
|
||||||
#define Z_MAX_PIN -1
|
#define Z_MAX_PIN -1
|
||||||
|
|
||||||
#define E_STEP_PIN 1
|
#define E_STEP_PIN 1
|
||||||
#define E_DIR_PIN 0
|
#define E_DIR_PIN 0
|
||||||
|
|
||||||
#define LED_PIN -1
|
#define LED_PIN -1
|
||||||
|
|
||||||
#define FAN_PIN -1
|
#define FAN_PIN -1
|
||||||
|
|
||||||
#define PS_ON_PIN -1
|
#define PS_ON_PIN -1
|
||||||
#define KILL_PIN -1
|
#define KILL_PIN -1
|
||||||
|
|
||||||
#define HEATER_0_PIN 13 // (extruder)
|
#define HEATER_0_PIN 13 // (extruder)
|
||||||
|
|
||||||
#ifdef SANGUINOLOLU_V_1_2
|
#ifdef SANGUINOLOLU_V_1_2
|
||||||
|
|
||||||
#define HEATER_1_PIN 12 // (bed)
|
#define HEATER_1_PIN 12 // (bed)
|
||||||
#define X_ENABLE_PIN 14
|
#define X_ENABLE_PIN 14
|
||||||
#define Y_ENABLE_PIN 14
|
#define Y_ENABLE_PIN 14
|
||||||
#define Z_ENABLE_PIN 26
|
#define Z_ENABLE_PIN 26
|
||||||
#define E_ENABLE_PIN 14
|
#define E_ENABLE_PIN 14
|
||||||
|
|
||||||
#else
|
#else
|
||||||
|
|
||||||
#define HEATER_1_PIN 14 // (bed)
|
#define HEATER_1_PIN 14 // (bed)
|
||||||
#define X_ENABLE_PIN -1
|
#define X_ENABLE_PIN -1
|
||||||
#define Y_ENABLE_PIN -1
|
#define Y_ENABLE_PIN -1
|
||||||
#define Z_ENABLE_PIN -1
|
#define Z_ENABLE_PIN -1
|
||||||
#define E_ENABLE_PIN -1
|
#define E_ENABLE_PIN -1
|
||||||
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#define TEMP_0_PIN 7 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 33 extruder)
|
#define TEMP_0_PIN 7 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 33 extruder)
|
||||||
#define TEMP_1_PIN 6 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 34 bed)
|
#define TEMP_1_PIN 6 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 34 bed)
|
||||||
#define TEMP_2_PIN -1
|
#define TEMP_2_PIN -1
|
||||||
#define SDPOWER -1
|
#define SDPOWER -1
|
||||||
#define SDSS 31
|
#define SDSS 31
|
||||||
#define HEATER_2_PIN -1
|
#define HEATER_2_PIN -1
|
||||||
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
|
||||||
#if MOTHERBOARD == 7
|
#if MOTHERBOARD == 7
|
||||||
#define KNOWN_BOARD
|
#define KNOWN_BOARD
|
||||||
/*****************************************************************
|
/*****************************************************************
|
||||||
* Ultimaker pin assignment
|
* Ultimaker pin assignment
|
||||||
******************************************************************/
|
******************************************************************/
|
||||||
|
|
||||||
#ifndef __AVR_ATmega1280__
|
#ifndef __AVR_ATmega1280__
|
||||||
#ifndef __AVR_ATmega2560__
|
#ifndef __AVR_ATmega2560__
|
||||||
#error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
|
#error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
|
||||||
#endif
|
#endif
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#define X_STEP_PIN 25
|
#define X_STEP_PIN 25
|
||||||
#define X_DIR_PIN 23
|
#define X_DIR_PIN 23
|
||||||
#define X_MIN_PIN 22
|
#define X_MIN_PIN 22
|
||||||
#define X_MAX_PIN 24
|
#define X_MAX_PIN 24
|
||||||
#define X_ENABLE_PIN 27
|
#define X_ENABLE_PIN 27
|
||||||
|
|
||||||
#define Y_STEP_PIN 31
|
#define Y_STEP_PIN 31
|
||||||
#define Y_DIR_PIN 33
|
#define Y_DIR_PIN 33
|
||||||
#define Y_MIN_PIN 26
|
#define Y_MIN_PIN 26
|
||||||
#define Y_MAX_PIN 28
|
#define Y_MAX_PIN 28
|
||||||
#define Y_ENABLE_PIN 29
|
#define Y_ENABLE_PIN 29
|
||||||
|
|
||||||
#define Z_STEP_PIN 37
|
#define Z_STEP_PIN 37
|
||||||
#define Z_DIR_PIN 39
|
#define Z_DIR_PIN 39
|
||||||
#define Z_MIN_PIN 30
|
#define Z_MIN_PIN 30
|
||||||
#define Z_MAX_PIN 32
|
#define Z_MAX_PIN 32
|
||||||
#define Z_ENABLE_PIN 35
|
#define Z_ENABLE_PIN 35
|
||||||
|
|
||||||
#define HEATER_1_PIN 4
|
#define HEATER_1_PIN 4
|
||||||
#define TEMP_1_PIN 11
|
#define TEMP_1_PIN 11
|
||||||
|
|
||||||
#define EXTRUDER_0_STEP_PIN 43
|
#define EXTRUDER_0_STEP_PIN 43
|
||||||
#define EXTRUDER_0_DIR_PIN 45
|
#define EXTRUDER_0_DIR_PIN 45
|
||||||
#define EXTRUDER_0_ENABLE_PIN 41
|
#define EXTRUDER_0_ENABLE_PIN 41
|
||||||
#define HEATER_0_PIN 2
|
#define HEATER_0_PIN 2
|
||||||
#define TEMP_0_PIN 8
|
#define TEMP_0_PIN 8
|
||||||
|
|
||||||
#define EXTRUDER_1_STEP_PIN 49
|
#define EXTRUDER_1_STEP_PIN 49
|
||||||
#define EXTRUDER_1_DIR_PIN 47
|
#define EXTRUDER_1_DIR_PIN 47
|
||||||
#define EXTRUDER_1_ENABLE_PIN 51
|
#define EXTRUDER_1_ENABLE_PIN 51
|
||||||
#define EXTRUDER_1_HEATER_PIN 3
|
#define EXTRUDER_1_HEATER_PIN 3
|
||||||
#define EXTRUDER_1_TEMPERATURE_PIN 10
|
#define EXTRUDER_1_TEMPERATURE_PIN 10
|
||||||
#define HEATER_2_PIN 51
|
#define HEATER_2_PIN 51
|
||||||
#define TEMP_2_PIN 3
|
#define TEMP_2_PIN 3
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#define E_STEP_PIN EXTRUDER_0_STEP_PIN
|
#define E_STEP_PIN EXTRUDER_0_STEP_PIN
|
||||||
#define E_DIR_PIN EXTRUDER_0_DIR_PIN
|
#define E_DIR_PIN EXTRUDER_0_DIR_PIN
|
||||||
#define E_ENABLE_PIN EXTRUDER_0_ENABLE_PIN
|
#define E_ENABLE_PIN EXTRUDER_0_ENABLE_PIN
|
||||||
|
|
||||||
#define SDPOWER -1
|
#define SDPOWER -1
|
||||||
#define SDSS 53
|
#define SDSS 53
|
||||||
#define LED_PIN 13
|
#define LED_PIN 13
|
||||||
#define FAN_PIN 7
|
#define FAN_PIN 7
|
||||||
#define PS_ON_PIN 12
|
#define PS_ON_PIN 12
|
||||||
#define KILL_PIN -1
|
#define KILL_PIN -1
|
||||||
|
|
||||||
#ifdef ULTRA_LCD
|
#ifdef ULTRA_LCD
|
||||||
|
|
||||||
#ifdef NEWPANEL
|
#ifdef NEWPANEL
|
||||||
//arduino pin witch triggers an piezzo beeper
|
//arduino pin witch triggers an piezzo beeper
|
||||||
#define BEEPER 18
|
#define BEEPER 18
|
||||||
|
|
||||||
#define LCD_PINS_RS 20
|
#define LCD_PINS_RS 20
|
||||||
#define LCD_PINS_ENABLE 17
|
#define LCD_PINS_ENABLE 17
|
||||||
#define LCD_PINS_D4 16
|
#define LCD_PINS_D4 16
|
||||||
#define LCD_PINS_D5 21
|
#define LCD_PINS_D5 21
|
||||||
#define LCD_PINS_D6 5
|
#define LCD_PINS_D6 5
|
||||||
#define LCD_PINS_D7 6
|
#define LCD_PINS_D7 6
|
||||||
|
|
||||||
//buttons are directly attached
|
//buttons are directly attached
|
||||||
#define BTN_EN1 40
|
#define BTN_EN1 40
|
||||||
#define BTN_EN2 42
|
#define BTN_EN2 42
|
||||||
#define BTN_ENC 19 //the click
|
#define BTN_ENC 19 //the click
|
||||||
|
|
||||||
#define BLEN_C 2
|
#define BLEN_C 2
|
||||||
#define BLEN_B 1
|
#define BLEN_B 1
|
||||||
#define BLEN_A 0
|
#define BLEN_A 0
|
||||||
|
|
||||||
#define SDCARDDETECT 38
|
#define SDCARDDETECT 38
|
||||||
|
|
||||||
//encoder rotation values
|
//encoder rotation values
|
||||||
#define encrot0 0
|
#define encrot0 0
|
||||||
#define encrot1 2
|
#define encrot1 2
|
||||||
#define encrot2 3
|
#define encrot2 3
|
||||||
#define encrot3 1
|
#define encrot3 1
|
||||||
#else //old style panel with shift register
|
#else //old style panel with shift register
|
||||||
//arduino pin witch triggers an piezzo beeper
|
//arduino pin witch triggers an piezzo beeper
|
||||||
#define BEEPER 18
|
#define BEEPER 18
|
||||||
|
|
||||||
//buttons are attached to a shift register
|
//buttons are attached to a shift register
|
||||||
#define SHIFT_CLK 38
|
#define SHIFT_CLK 38
|
||||||
#define SHIFT_LD 42
|
#define SHIFT_LD 42
|
||||||
#define SHIFT_OUT 40
|
#define SHIFT_OUT 40
|
||||||
#define SHIFT_EN 17
|
#define SHIFT_EN 17
|
||||||
|
|
||||||
#define LCD_PINS_RS 16
|
#define LCD_PINS_RS 16
|
||||||
#define LCD_PINS_ENABLE 5
|
#define LCD_PINS_ENABLE 5
|
||||||
#define LCD_PINS_D4 6
|
#define LCD_PINS_D4 6
|
||||||
#define LCD_PINS_D5 21
|
#define LCD_PINS_D5 21
|
||||||
#define LCD_PINS_D6 20
|
#define LCD_PINS_D6 20
|
||||||
#define LCD_PINS_D7 19
|
#define LCD_PINS_D7 19
|
||||||
|
|
||||||
//encoder rotation values
|
//encoder rotation values
|
||||||
#define encrot0 0
|
#define encrot0 0
|
||||||
#define encrot1 2
|
#define encrot1 2
|
||||||
#define encrot2 3
|
#define encrot2 3
|
||||||
#define encrot3 1
|
#define encrot3 1
|
||||||
|
|
||||||
|
|
||||||
//bits in the shift register that carry the buttons for:
|
//bits in the shift register that carry the buttons for:
|
||||||
// left up center down right red
|
// left up center down right red
|
||||||
#define BL_LE 7
|
#define BL_LE 7
|
||||||
#define BL_UP 6
|
#define BL_UP 6
|
||||||
#define BL_MI 5
|
#define BL_MI 5
|
||||||
#define BL_DW 4
|
#define BL_DW 4
|
||||||
#define BL_RI 3
|
#define BL_RI 3
|
||||||
#define BL_ST 2
|
#define BL_ST 2
|
||||||
|
|
||||||
#define BLEN_B 1
|
#define BLEN_B 1
|
||||||
#define BLEN_A 0
|
#define BLEN_A 0
|
||||||
#endif
|
#endif
|
||||||
#endif //ULTRA_LCD
|
#endif //ULTRA_LCD
|
||||||
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
/****************************************************************************************
|
||||||
#ifndef KNOWN_BOARD
|
* Teensylu 0.7 pin assingments (ATMEGA90USB)
|
||||||
#error Unknown MOTHERBOARD value in configuration.h
|
* Requires the Teensyduino software with Teensy2.0++ selected in arduino IDE!
|
||||||
#endif
|
****************************************************************************************/
|
||||||
|
#if MOTHERBOARD == 8
|
||||||
//List of pins which to ignore when asked to change by gcode, 0 and 1 are RX and TX, do not mess with those!
|
#define MOTHERBOARD 8
|
||||||
#define SENSITIVE_PINS {0, 1, X_STEP_PIN, X_DIR_PIN, X_ENABLE_PIN, X_MIN_PIN, X_MAX_PIN, Y_STEP_PIN, Y_DIR_PIN, Y_ENABLE_PIN, Y_MIN_PIN, Y_MAX_PIN, Z_STEP_PIN, Z_DIR_PIN, Z_ENABLE_PIN, Z_MIN_PIN, Z_MAX_PIN, E_STEP_PIN, E_DIR_PIN, E_ENABLE_PIN, LED_PIN, PS_ON_PIN, HEATER_0_PIN, HEATER_1_PIN, HEATER_2_PIN, FAN_PIN, TEMP_0_PIN, TEMP_1_PIN, TEMP_2_PIN}
|
#define KNOWN_BOARD 1
|
||||||
|
|
||||||
|
|
||||||
|
#define X_STEP_PIN 0
|
||||||
|
#define X_DIR_PIN 1
|
||||||
|
#define X_ENABLE_PIN 39
|
||||||
|
#define X_MIN_PIN 13
|
||||||
|
#define X_MAX_PIN -1
|
||||||
|
|
||||||
|
#define Y_STEP_PIN 2
|
||||||
|
#define Y_DIR_PIN 3
|
||||||
|
#define Y_ENABLE_PIN 38
|
||||||
|
#define Y_MIN_PIN 14
|
||||||
|
#define Y_MAX_PIN -1
|
||||||
|
|
||||||
|
#define Z_STEP_PIN 4
|
||||||
|
#define Z_DIR_PIN 5
|
||||||
|
#define Z_ENABLE_PIN 23
|
||||||
|
#define Z_MIN_PIN 15
|
||||||
|
#define Z_MAX_PIN -1
|
||||||
|
|
||||||
|
#define E_STEP_PIN 6
|
||||||
|
#define E_DIR_PIN 7
|
||||||
|
#define E_ENABLE_PIN 19
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
#define HEATER_0_PIN 21 // Extruder
|
||||||
|
#define HEATER_1_PIN 20 // Bed
|
||||||
|
#define HEATER_2_PIN -1
|
||||||
|
#define FAN_PIN 22 // Fan
|
||||||
|
|
||||||
|
#define TEMP_0_PIN 7 // Extruder
|
||||||
|
#define TEMP_1_PIN 6 // Bed
|
||||||
|
#define TEMP_2_PIN -1
|
||||||
|
|
||||||
|
#define SDPOWER -1
|
||||||
|
#define SDSS 8
|
||||||
|
#define LED_PIN -1
|
||||||
|
#define PS_ON_PIN -1
|
||||||
|
#define KILL_PIN -1
|
||||||
|
#define ALARM_PIN -1
|
||||||
|
|
||||||
|
#ifndef SDSUPPORT
|
||||||
|
// these pins are defined in the SD library if building with SD support
|
||||||
|
#define SCK_PIN 9
|
||||||
|
#define MISO_PIN 11
|
||||||
|
#define MOSI_PIN 10
|
||||||
|
#endif
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifndef KNOWN_BOARD
|
||||||
|
#error Unknown MOTHERBOARD value in configuration.h
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//List of pins which to ignore when asked to change by gcode, 0 and 1 are RX and TX, do not mess with those!
|
||||||
|
#define SENSITIVE_PINS {0, 1, X_STEP_PIN, X_DIR_PIN, X_ENABLE_PIN, X_MIN_PIN, X_MAX_PIN, Y_STEP_PIN, Y_DIR_PIN, Y_ENABLE_PIN, Y_MIN_PIN, Y_MAX_PIN, Z_STEP_PIN, Z_DIR_PIN, Z_ENABLE_PIN, Z_MIN_PIN, Z_MAX_PIN, E_STEP_PIN, E_DIR_PIN, E_ENABLE_PIN, LED_PIN, PS_ON_PIN, HEATER_0_PIN, HEATER_1_PIN, HEATER_2_PIN, FAN_PIN, TEMP_0_PIN, TEMP_1_PIN, TEMP_2_PIN}
|
||||||
|
|
||||||
#endif
|
#endif
|
||||||
|
|
|
||||||
Reference in a new issue