From 76da81c1dec742e5267645721ceb2c7b36a7e943 Mon Sep 17 00:00:00 2001 From: Bob-the-Kuhn Date: Sun, 30 Jul 2017 00:02:41 -0500 Subject: [PATCH] minimize SD card reads when using SDCARD_SORT_ALPHA (Re-ARM board) Because of the Re-ARM card's pinout there is only one SPI connected to the RepRap Discount Full Graphic LCD display. The LCD responds to ANY SCK transitions no matter if it's enable is inactive. The result is garbage (usually bars) on the LCD display whenever there is SD card activity. This code minimizes this by only accessing the SD card when changing directory levels if : SDCARD_SORT_ALPHA is enabled SDSORT_USES_RAM is true SDSORT_CACHE_NAMES is true The code changes result in file names being pulled from the ALPHA SORT memory array rather than the SD card. The code also gives the file count and file index functions their own variables. When they shared a common variable the index function sometimes resulted in the file count being short by 1. ======================================================================= cardreader.cpp & pins_RAMPS_RE_ARM.h changes Added another condition to cardreader.cpp to enable getting file names only from RAM. pins_RAMPS_RE_ARM.h : Added comments about the SD card accesses and the LCD display Combined all versions into this one. --- Marlin/cardreader.cpp | 18 ++++++++++++---- Marlin/cardreader.h | 2 ++ Marlin/pins_RAMPS_RE_ARM.h | 16 +++++++-------- Marlin/ultralcd.cpp | 42 ++++++++++++++++++++------------------ 4 files changed, 46 insertions(+), 32 deletions(-) diff --git a/Marlin/cardreader.cpp b/Marlin/cardreader.cpp index d862c6c42..bd4bb317c 100644 --- a/Marlin/cardreader.cpp +++ b/Marlin/cardreader.cpp @@ -74,9 +74,12 @@ char *createFilename(char *buffer, const dir_t &p) { //buffer > 12characters /** * Dive into a folder and recurse depth-first to perform a pre-set operation lsAction: * LS_Count - Add +1 to nrFiles for every file within the parent - * LS_GetFilename - Get the filename of the file indexed by nrFiles + * LS_GetFilename - Get the filename of the file indexed by nrFile_index * LS_SerialPrint - Print the full path and size of each file to serial output */ + +uint16_t nrFile_index; + void CardReader::lsDive(const char *prepend, SdFile parent, const char * const match/*=NULL*/) { dir_t p; uint8_t cnt = 0; @@ -130,7 +133,7 @@ void CardReader::lsDive(const char *prepend, SdFile parent, const char * const m if (!filenameIsDir && (p.name[8] != 'G' || p.name[9] == '~')) continue; - switch (lsAction) { + switch (lsAction) { // 1 based file count case LS_Count: nrFiles++; break; @@ -148,7 +151,7 @@ void CardReader::lsDive(const char *prepend, SdFile parent, const char * const m if (match != NULL) { if (strcasecmp(match, filename) == 0) return; } - else if (cnt == nrFiles) return; + else if (cnt == nrFile_index) return; // 0 based index cnt++; break; } @@ -596,7 +599,7 @@ void CardReader::getfilename(uint16_t nr, const char * const match/*=NULL*/) { #endif // SDSORT_CACHE_NAMES curDir = &workDir; lsAction = LS_GetFilename; - nrFiles = nr; + nrFile_index = nr; curDir->rewind(); lsDive("", *curDir, match); } @@ -861,6 +864,13 @@ void CardReader::updir() { #endif // SDCARD_SORT_ALPHA +#if (ENABLED(SDCARD_SORT_ALPHA) && SDSORT_USES_RAM && SDSORT_CACHE_NAMES) + // if true - don't need to access the SD card for file names + uint16_t CardReader::get_num_Files() {return nrFiles;} +#else + uint16_t CardReader::get_num_Files() {return getnrfilenames(); } +#endif + void CardReader::printingHasFinished() { stepper.synchronize(); file.close(); diff --git a/Marlin/cardreader.h b/Marlin/cardreader.h index c9bea6036..657e9f379 100644 --- a/Marlin/cardreader.h +++ b/Marlin/cardreader.h @@ -69,6 +69,8 @@ public: void updir(); void setroot(); + uint16_t get_num_Files(); + #if ENABLED(SDCARD_SORT_ALPHA) void presort(); void getfilename_sorted(const uint16_t nr); diff --git a/Marlin/pins_RAMPS_RE_ARM.h b/Marlin/pins_RAMPS_RE_ARM.h index 9afa514c0..6dda906c6 100644 --- a/Marlin/pins_RAMPS_RE_ARM.h +++ b/Marlin/pins_RAMPS_RE_ARM.h @@ -52,7 +52,7 @@ // // Servos // -#define SERVO0_PIN 11 +#define SERVO0_PIN 11 #define SERVO1_PIN 6 // also on J5-1 #define SERVO2_PIN 5 #define SERVO3_PIN 4 // 5V output - PWM capable @@ -214,9 +214,9 @@ * * All controllers can use J3 and J5 on the Re-ARM board. Custom cabling will be required. */ - -/** - * Smart LCD adapter + +/** + * Smart LCD adapter * * The Smart LCD adapter can be used for the two 10 pin LCD controllers such as * REPRAP_DISCOUNT_SMART_CONTROLLER. It can't be used for controllers that use @@ -224,7 +224,7 @@ * is needed to pick up 5V for the EXP1 connection. * * SD card on the LCD uses the same SPI signals as the LCD. This results in garbage/lines - * on the LCD display during accesses of the SD card. The menus/code has been arranged so + * on the LCD display during accesses of the SD card. The menus/code has been arranged so * that the garbage/lines are erased immediately after the SD card accesses are completed. */ @@ -248,7 +248,7 @@ #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) && ENABLED(SDSUPPORT) #define SDCARD_SORT_ALPHA // Using SORT feature to keep one directory level in RAM // When going up/down directory levels the SD card is - // accessed but the garbage/lines are removed when the + // accessed but the garbage/lines are removed when the // LCD updates // SD Card Sorting options @@ -262,7 +262,7 @@ #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #endif #endif - + #define BTN_EN1 31 // J3-2 & AUX-4 #define BTN_EN2 33 // J3-4 & AUX-4 #define BTN_ENC 35 // J3-3 & AUX-4 @@ -286,7 +286,7 @@ //#define MOSI 51 // system defined J3-10 & AUX-3 //#define SCK 52 // system defined J3-9 & AUX-3 //#define SS_PIN 53 // system defined J3-5 & AUX-3 - sometimes called SDSS - + #if ENABLED(VIKI2) || ENABLED(miniVIKI) #define LCD_SCREEN_ROT_180 diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp index 57c3e3227..3afd278fd 100644 --- a/Marlin/ultralcd.cpp +++ b/Marlin/ultralcd.cpp @@ -3507,7 +3507,7 @@ void kill_screen(const char* lcd_msg) { void lcd_sdcard_menu() { ENCODER_DIRECTION_MENUS(); if (!lcdDrawUpdate && !lcd_clicked) return; // nothing to do (so don't thrash the SD card) - const uint16_t fileCnt = card.getnrfilenames(); + const uint16_t fileCnt = card.get_num_Files(); START_MENU(); MENU_BACK(MSG_MAIN); card.getWorkDirName(); @@ -3520,27 +3520,29 @@ void kill_screen(const char* lcd_msg) { MENU_ITEM(function, LCD_STR_FOLDER "..", lcd_sd_updir); } - for (uint16_t i = 0; i < fileCnt; i++) { - if (_menuLineNr == _thisItemNr) { - const uint16_t nr = - #if ENABLED(SDCARD_RATHERRECENTFIRST) && DISABLED(SDCARD_SORT_ALPHA) - fileCnt - 1 - + if (fileCnt) { + for (uint16_t i = 0; i < fileCnt; i++) { + if (_menuLineNr == _thisItemNr) { + const uint16_t nr = + #if ENABLED(SDCARD_RATHERRECENTFIRST) && DISABLED(SDCARD_SORT_ALPHA) + fileCnt - 1 - + #endif + i; + + #if ENABLED(SDCARD_SORT_ALPHA) + card.getfilename_sorted(nr); + #else + card.getfilename(nr); #endif - i; - #if ENABLED(SDCARD_SORT_ALPHA) - card.getfilename_sorted(nr); - #else - card.getfilename(nr); - #endif - - if (card.filenameIsDir) - MENU_ITEM(sddirectory, MSG_CARD_MENU, card.filename, card.longFilename); - else - MENU_ITEM(sdfile, MSG_CARD_MENU, card.filename, card.longFilename); - } - else { - MENU_ITEM_DUMMY(); + if (card.filenameIsDir) + MENU_ITEM(sddirectory, MSG_CARD_MENU, card.filename, card.longFilename); + else + MENU_ITEM(sdfile, MSG_CARD_MENU, card.filename, card.longFilename); + } + else { + MENU_ITEM_DUMMY(); + } } } END_MENU();