diff --git a/Marlin/thermistortables.h b/Marlin/thermistortables.h
index 2e6decdd9..a0268e435 100644
--- a/Marlin/thermistortables.h
+++ b/Marlin/thermistortables.h
@@ -28,7 +28,9 @@
 
 #define OVERSAMPLENR 16
 
-#if (THERMISTORHEATER_0 == 1) || (THERMISTORHEATER_1 == 1)  || (THERMISTORHEATER_2 == 1) || (THERMISTORHEATER_3 == 1) || (THERMISTORBED == 1) //100k bed thermistor
+#define ANY_THERMISTOR_IS(n) (THERMISTORHEATER_0 == n || THERMISTORHEATER_1 == n || THERMISTORHEATER_2 == n || THERMISTORHEATER_3 == n || THERMISTORBED == n)
+
+#if ANY_THERMISTOR_IS(1) // 100k bed thermistor
 const short temptable_1[][2] PROGMEM = {
   {   23 * OVERSAMPLENR, 300 },
   {   25 * OVERSAMPLENR, 295 },
@@ -94,7 +96,7 @@ const short temptable_1[][2] PROGMEM = {
 };
 #endif
 
-#if (THERMISTORHEATER_0 == 2) || (THERMISTORHEATER_1 == 2) || (THERMISTORHEATER_2 == 2) || (THERMISTORHEATER_3 == 2) || (THERMISTORBED == 2) //200k bed thermistor
+#if ANY_THERMISTOR_IS(2) // 200k bed thermistor
 // 200k ATC Semitec 204GT-2
 // Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
 // Calculated using 4.7kohm pullup, voltage divider math, and manufacturer provided temp/resistance
@@ -134,7 +136,7 @@ const short temptable_2[][2] PROGMEM = {
 };
 #endif
 
-#if (THERMISTORHEATER_0 == 3) || (THERMISTORHEATER_1 == 3) || (THERMISTORHEATER_2 == 3) || (THERMISTORHEATER_3 == 3) || (THERMISTORBED == 3) //mendel-parts
+#if ANY_THERMISTOR_IS(3) // mendel-parts
 const short temptable_3[][2] PROGMEM = {
   {    1 * OVERSAMPLENR, 864 },
   {   21 * OVERSAMPLENR, 300 },
@@ -167,7 +169,7 @@ const short temptable_3[][2] PROGMEM = {
 };
 #endif
 
-#if (THERMISTORHEATER_0 == 4) || (THERMISTORHEATER_1 == 4) || (THERMISTORHEATER_2 == 4) || (THERMISTORHEATER_3 == 4) || (THERMISTORBED == 4) //10k thermistor
+#if ANY_THERMISTOR_IS(4) // 10k thermistor
 const short temptable_4[][2] PROGMEM = {
   {    1 * OVERSAMPLENR, 430 },
   {   54 * OVERSAMPLENR, 137 },
@@ -192,7 +194,7 @@ const short temptable_4[][2] PROGMEM = {
 };
 #endif
 
-#if (THERMISTORHEATER_0 == 5) || (THERMISTORHEATER_1 == 5) || (THERMISTORHEATER_2 == 5) || (THERMISTORHEATER_3 == 5) || (THERMISTORBED == 5) //100k ParCan thermistor (104GT-2)
+#if ANY_THERMISTOR_IS(5) // 100k ParCan thermistor (104GT-2)
 // ATC Semitec 104GT-2 (Used in ParCan)
 // Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
 // Calculated using 4.7kohm pullup, voltage divider math, and manufacturer provided temp/resistance
@@ -232,7 +234,7 @@ const short temptable_5[][2] PROGMEM = {
 };
 #endif
 
-#if (THERMISTORHEATER_0 == 6) || (THERMISTORHEATER_1 == 6) || (THERMISTORHEATER_2 == 6) || (THERMISTORHEATER_3 == 6) || (THERMISTORBED == 6) // 100k Epcos thermistor
+#if ANY_THERMISTOR_IS(6) // 100k Epcos thermistor
 const short temptable_6[][2] PROGMEM = {
   {    1 * OVERSAMPLENR, 350 },
   {   28 * OVERSAMPLENR, 250 }, // top rating 250C
@@ -275,7 +277,7 @@ const short temptable_6[][2] PROGMEM = {
 };
 #endif
 
-#if (THERMISTORHEATER_0 == 7) || (THERMISTORHEATER_1 == 7) || (THERMISTORHEATER_2 == 7) || (THERMISTORHEATER_3 == 7) || (THERMISTORBED == 7) // 100k Honeywell 135-104LAG-J01
+#if ANY_THERMISTOR_IS(7) // 100k Honeywell 135-104LAG-J01
 const short temptable_7[][2] PROGMEM = {
   {    1 * OVERSAMPLENR, 941 },
   {   19 * OVERSAMPLENR, 362 },
@@ -338,7 +340,7 @@ const short temptable_7[][2] PROGMEM = {
 };
 #endif
 
-#if (THERMISTORHEATER_0 == 71) || (THERMISTORHEATER_1 == 71) || (THERMISTORHEATER_2 == 71) || (THERMISTORHEATER_3 == 71) || (THERMISTORBED == 71) // 100k Honeywell 135-104LAF-J01
+#if ANY_THERMISTOR_IS(71) // 100k Honeywell 135-104LAF-J01
 // R0 = 100000 Ohm
 // T0 = 25 °C
 // Beta = 3974
@@ -489,7 +491,7 @@ const short temptable_71[][2] PROGMEM = {
 };
 #endif
 
-#if (THERMISTORHEATER_0 == 8) || (THERMISTORHEATER_1 == 8) || (THERMISTORHEATER_2 == 8) || (THERMISTORHEATER_3 == 8) || (THERMISTORBED == 8)
+#if ANY_THERMISTOR_IS(8)
 // 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
 const short temptable_8[][2] PROGMEM = {
   {    1 * OVERSAMPLENR, 704 },
@@ -515,7 +517,7 @@ const short temptable_8[][2] PROGMEM = {
 };
 #endif
 
-#if (THERMISTORHEATER_0 == 9) || (THERMISTORHEATER_1 == 9) || (THERMISTORHEATER_2 == 9) || (THERMISTORHEATER_3 == 9) || (THERMISTORBED == 9)
+#if ANY_THERMISTOR_IS(9)
 // 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
 const short temptable_9[][2] PROGMEM = {
   {    1 * OVERSAMPLENR, 936 },
@@ -552,7 +554,7 @@ const short temptable_9[][2] PROGMEM = {
 };
 #endif
 
-#if (THERMISTORHEATER_0 == 10) || (THERMISTORHEATER_1 == 10) || (THERMISTORHEATER_2 == 10) || (THERMISTORHEATER_3 == 10) || (THERMISTORBED == 10)
+#if ANY_THERMISTOR_IS(10)
 // 100k RS thermistor 198-961 (4.7k pullup)
 const short temptable_10[][2] PROGMEM = {
   {    1 * OVERSAMPLENR, 929 },
@@ -589,7 +591,7 @@ const short temptable_10[][2] PROGMEM = {
 };
 #endif
 
-#if (THERMISTORHEATER_0 == 11) || (THERMISTORHEATER_1 == 11) || (THERMISTORHEATER_2 == 11) || (THERMISTORHEATER_3 == 11) || (THERMISTORBED == 11)
+#if ANY_THERMISTOR_IS(11)
 // QU-BD silicone bed QWG-104F-3950 thermistor
 const short temptable_11[][2] PROGMEM = {
   {    1 * OVERSAMPLENR, 938 },
@@ -645,7 +647,7 @@ const short temptable_11[][2] PROGMEM = {
 };
 #endif
 
-#if (THERMISTORHEATER_0 == 13) || (THERMISTORHEATER_1 == 13) || (THERMISTORHEATER_2 == 13) || (THERMISTORHEATER_3 == 13) || (THERMISTORBED == 13)
+#if ANY_THERMISTOR_IS(13)
 // Hisens thermistor B25/50 =3950 +/-1%
 const short temptable_13[][2] PROGMEM = {
   {  20.04 * OVERSAMPLENR, 300 },
@@ -675,7 +677,7 @@ const short temptable_13[][2] PROGMEM = {
 };
 #endif
 
-#if (THERMISTORHEATER_0 == 20) || (THERMISTORHEATER_1 == 20) || (THERMISTORHEATER_2 == 20) || (THERMISTORBED == 20) // PT100 with INA826 amp on Ultimaker v2.0 electronics
+#if ANY_THERMISTOR_IS(20) // PT100 with INA826 amp on Ultimaker v2.0 electronics
 // The PT100 in the Ultimaker v2.0 electronics has a high sample value for a high temperature.
 // This does not match the normal thermistor behaviour so we need to set the following defines
 #if (THERMISTORHEATER_0 == 20)
@@ -751,7 +753,7 @@ const short temptable_20[][2] PROGMEM = {
 };
 #endif
 
-#if (THERMISTORHEATER_0 == 51) || (THERMISTORHEATER_1 == 51) || (THERMISTORHEATER_2 == 51) || (THERMISTORHEATER_3 == 51) || (THERMISTORBED == 51)
+#if ANY_THERMISTOR_IS(51)
 // 100k EPCOS (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
 // Verified by linagee.
 // Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance
@@ -813,7 +815,7 @@ const short temptable_51[][2] PROGMEM = {
 };
 #endif
 
-#if (THERMISTORHEATER_0 == 52) || (THERMISTORHEATER_1 == 52) || (THERMISTORHEATER_2 == 52) || (THERMISTORHEATER_3 == 52) || (THERMISTORBED == 52)
+#if ANY_THERMISTOR_IS(52)
 // 200k ATC Semitec 204GT-2 (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
 // Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
 // Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance
@@ -854,7 +856,7 @@ const short temptable_52[][2] PROGMEM = {
 };
 #endif
 
-#if (THERMISTORHEATER_0 == 55) || (THERMISTORHEATER_1 == 55) || (THERMISTORHEATER_2 == 55) || (THERMISTORHEATER_3 == 55) || (THERMISTORBED == 55)
+#if ANY_THERMISTOR_IS(55)
 // 100k ATC Semitec 104GT-2 (Used on ParCan) (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
 // Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
 // Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance
@@ -895,7 +897,7 @@ const short temptable_55[][2] PROGMEM = {
 };
 #endif
 
-#if (THERMISTORHEATER_0 == 60) || (THERMISTORHEATER_1 == 60) || (THERMISTORHEATER_2 == 60) || (THERMISTORHEATER_3 == 60) || (THERMISTORBED == 60) // Maker's Tool Works Kapton Bed Thermistor
+#if ANY_THERMISTOR_IS(60) // Maker's Tool Works Kapton Bed Thermistor
 // ./createTemperatureLookup.py --r0=100000 --t0=25 --r1=0 --r2=4700 --beta=3950
 // r0: 100000
 // t0: 25
@@ -980,7 +982,7 @@ const short temptable_60[][2] PROGMEM = {
 };
 #endif
 
-#if (THERMISTORHEATER_0 == 12) || (THERMISTORHEATER_1 == 12) || (THERMISTORHEATER_2 == 12) || (THERMISTORHEATER_3 == 12) || (THERMISTORBED == 12)
+#if ANY_THERMISTOR_IS(12)
 // 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
 const short temptable_12[][2] PROGMEM = {
   {   35 * OVERSAMPLENR, 180 }, // top rating 180C
@@ -1016,7 +1018,7 @@ const short temptable_12[][2] PROGMEM = {
 };
 #endif
 
-#if (THERMISTORHEATER_0 == 70) || (THERMISTORHEATER_1 == 70) || (THERMISTORHEATER_2 == 70) || (THERMISTORHEATER_3 == 70) || (THERMISTORBED == 70) // bqh2 stock thermistor
+#if ANY_THERMISTOR_IS(70) // bqh2 stock thermistor
 const short temptable_70[][2] PROGMEM = {
   {   22 * OVERSAMPLENR, 300 },
   {   24 * OVERSAMPLENR, 295 },
@@ -1093,7 +1095,7 @@ const short temptable_70[][2] PROGMEM = {
 #define PtAdVal(T,R0,Rup) (short)(1024/(Rup/PtRt(T,R0)+1))
 #define PtLine(T,R0,Rup) { PtAdVal(T,R0,Rup)*OVERSAMPLENR, T },
 
-#if (THERMISTORHEATER_0 == 110) || (THERMISTORHEATER_1 == 110) || (THERMISTORHEATER_2 == 110) || (THERMISTORHEATER_3 == 110) || (THERMISTORBED == 110) // Pt100 with 1k0 pullup
+#if ANY_THERMISTOR_IS(110) // Pt100 with 1k0 pullup
 const short temptable_110[][2] PROGMEM = {
   // only few values are needed as the curve is very flat
   PtLine(  0, 100, 1000)
@@ -1105,7 +1107,7 @@ const short temptable_110[][2] PROGMEM = {
   PtLine(300, 100, 1000)
 };
 #endif
-#if (THERMISTORHEATER_0 == 147) || (THERMISTORHEATER_1 == 147) || (THERMISTORHEATER_2 == 147) || (THERMISTORHEATER_3 == 147) || (THERMISTORBED == 147) // Pt100 with 4k7 pullup
+#if ANY_THERMISTOR_IS(147) // Pt100 with 4k7 pullup
 const short temptable_147[][2] PROGMEM = {
   // only few values are needed as the curve is very flat
   PtLine(  0, 100, 4700)
@@ -1117,7 +1119,7 @@ const short temptable_147[][2] PROGMEM = {
   PtLine(300, 100, 4700)
 };
 #endif
-#if (THERMISTORHEATER_0 == 1010) || (THERMISTORHEATER_1 == 1010) || (THERMISTORHEATER_2 == 1010) || (THERMISTORHEATER_3 == 1010) || (THERMISTORBED == 1010) // Pt1000 with 1k0 pullup
+#if ANY_THERMISTOR_IS(1010) // Pt1000 with 1k0 pullup
 const short temptable_1010[][2] PROGMEM = {
   PtLine(  0, 1000, 1000)
   PtLine( 25, 1000, 1000)
@@ -1134,7 +1136,7 @@ const short temptable_1010[][2] PROGMEM = {
   PtLine(300, 1000, 1000)
 };
 #endif
-#if (THERMISTORHEATER_0 == 1047) || (THERMISTORHEATER_1 == 1047) || (THERMISTORHEATER_2 == 1047) || (THERMISTORHEATER_3 == 1047) || (THERMISTORBED == 1047) // Pt1000 with 4k7 pullup
+#if ANY_THERMISTOR_IS(1047) // Pt1000 with 4k7 pullup
 const short temptable_1047[][2] PROGMEM = {
   // only few values are needed as the curve is very flat
   PtLine(  0, 1000, 4700)
@@ -1147,7 +1149,7 @@ const short temptable_1047[][2] PROGMEM = {
 };
 #endif
 
-#if (THERMISTORHEATER_0 == 999) || (THERMISTORHEATER_1 == 999) || (THERMISTORHEATER_2 == 999) || (THERMISTORHEATER_3 == 999) || (THERMISTORBED == 999) //User defined table
+#if ANY_THERMISTOR_IS(999) // User-defined table
   // Dummy Thermistor table.. It will ALWAYS read a fixed value.
   #ifndef DUMMY_THERMISTOR_999_VALUE
     #define DUMMY_THERMISTOR_999_VALUE 25
@@ -1158,7 +1160,7 @@ const short temptable_1047[][2] PROGMEM = {
 };
 #endif
 
-#if (THERMISTORHEATER_0 == 998) || (THERMISTORHEATER_1 == 998) || (THERMISTORHEATER_2 == 998) || (THERMISTORHEATER_3 == 998) || (THERMISTORBED == 998) //User defined table
+#if ANY_THERMISTOR_IS(998) // User-defined table
   // Dummy Thermistor table.. It will ALWAYS read a fixed value.
   #ifndef DUMMY_THERMISTOR_998_VALUE
     #define DUMMY_THERMISTOR_998_VALUE 25