From 77c2d810f92e21cfb57cf392e734583717fa6407 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sun, 14 Jan 2018 22:52:06 -0600 Subject: [PATCH] Bring configs up to date --- .../examples/Creality/CR-10/Configuration_adv.h | 0 .../config/examples/Creality/CR-10S/Configuration.h | 6 +++--- .../examples/Creality/CR-10S/Configuration_adv.h | 2 +- .../examples/FolgerTech/i3-2020/Configuration.h | 4 ++-- .../examples/Micromake/C1/basic/Configuration.h | 4 ++-- .../examples/Micromake/C1/enhanced/Configuration.h | 4 ++-- .../Micromake/C1/enhanced/Configuration_adv.h | 1 - .../config/examples/Sanguinololu/Configuration_adv.h | 11 +++++++++++ Marlin/src/config/examples/Tronxy/X1/Configuration.h | 4 ++-- .../examples/Velleman/K8200/Configuration_adv.h | 10 ++++++---- .../delta/FLSUN/auto_calibrate/Configuration.h | 6 +++--- .../examples/delta/FLSUN/kossel_mini/Configuration.h | 7 ++++++- .../delta/FLSUN/kossel_mini/Configuration_adv.h | 2 +- .../src/config/examples/delta/generic/Configuration.h | 2 +- .../config/examples/delta/generic/Configuration_adv.h | 2 +- .../config/examples/delta/kossel_mini/Configuration.h | 2 +- .../examples/delta/kossel_mini/Configuration_adv.h | 2 +- .../config/examples/delta/kossel_pro/Configuration.h | 2 +- .../examples/delta/kossel_pro/Configuration_adv.h | 2 +- .../config/examples/delta/kossel_xl/Configuration.h | 6 +++--- .../examples/delta/kossel_xl/Configuration_adv.h | 2 +- .../config/examples/gCreate/gMax1.5+/Configuration.h | 4 ++-- .../examples/gCreate/gMax1.5+/Configuration_adv.h | 1 - Marlin/src/config/examples/wt150/Configuration.h | 2 +- 24 files changed, 52 insertions(+), 36 deletions(-) mode change 100644 => 100755 Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h mode change 100755 => 100644 Marlin/src/config/examples/Creality/CR-10S/Configuration.h diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h old mode 100644 new mode 100755 diff --git a/Marlin/src/config/examples/Creality/CR-10S/Configuration.h b/Marlin/src/config/examples/Creality/CR-10S/Configuration.h old mode 100755 new mode 100644 index e84164d02..d40535a31 --- a/Marlin/src/config/examples/Creality/CR-10S/Configuration.h +++ b/Marlin/src/config/examples/Creality/CR-10S/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 020000 //=========================================================================== //============================= Getting Started ============================= @@ -59,14 +59,14 @@ //============================= DELTA Printer =============================== //=========================================================================== // For a Delta printer start with one of the configuration files in the -// example_configurations/delta directory and customize for your machine. +// config/examples/delta directory and customize for your machine. // //=========================================================================== //============================= SCARA Printer =============================== //=========================================================================== // For a SCARA printer start with the configuration files in -// example_configurations/SCARA and customize for your machine. +// config/examples/SCARA and customize for your machine. // // @section info diff --git a/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h index 2c7a19f7a..af84544cd 100644 --- a/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010107 +#define CONFIGURATION_ADV_H_VERSION 020000 // @section temperature diff --git a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h index d5a227053..74db08162 100644 --- a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h +++ b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h @@ -815,7 +815,7 @@ * - Use 'M211' to set software endstops on/off or report current state */ -// If enabled, axes won't move below MIN_POS in response to movement commands. +// Min software endstops constrain movement within minimum coordinate bounds //#define MIN_SOFTWARE_ENDSTOPS #if ENABLED(MIN_SOFTWARE_ENDSTOPS) #define MIN_SOFTWARE_ENDSTOP_X @@ -823,7 +823,7 @@ #define MIN_SOFTWARE_ENDSTOP_Z #endif -// If enabled, axes won't move above MAX_POS in response to movement commands. +// Max software endstops constrain movement within maximum coordinate bounds #define MAX_SOFTWARE_ENDSTOPS #if ENABLED(MAX_SOFTWARE_ENDSTOPS) #define MAX_SOFTWARE_ENDSTOP_X diff --git a/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h b/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h index 6d8c0de1a..94145fff3 100644 --- a/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h +++ b/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h @@ -813,7 +813,7 @@ * - Use 'M211' to set software endstops on/off or report current state */ -// Min software endstops curtail movement below minimum coordinate bounds +// Min software endstops constrain movement within minimum coordinate bounds #define MIN_SOFTWARE_ENDSTOPS #if ENABLED(MIN_SOFTWARE_ENDSTOPS) #define MIN_SOFTWARE_ENDSTOP_X @@ -821,7 +821,7 @@ #define MIN_SOFTWARE_ENDSTOP_Z #endif -// Max software endstops curtail movement above maximum coordinate bounds +// Max software endstops constrain movement within maximum coordinate bounds #define MAX_SOFTWARE_ENDSTOPS #if ENABLED(MAX_SOFTWARE_ENDSTOPS) #define MAX_SOFTWARE_ENDSTOP_X diff --git a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h index 4238c4b3f..4823542c5 100644 --- a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h +++ b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h @@ -813,7 +813,7 @@ * - Use 'M211' to set software endstops on/off or report current state */ -// Min software endstops curtail movement below minimum coordinate bounds +// Min software endstops constrain movement within minimum coordinate bounds #define MIN_SOFTWARE_ENDSTOPS #if ENABLED(MIN_SOFTWARE_ENDSTOPS) #define MIN_SOFTWARE_ENDSTOP_X @@ -821,7 +821,7 @@ #define MIN_SOFTWARE_ENDSTOP_Z #endif -// Max software endstops curtail movement above maximum coordinate bounds +// Max software endstops constrain movement within maximum coordinate bounds #define MAX_SOFTWARE_ENDSTOPS #if ENABLED(MAX_SOFTWARE_ENDSTOPS) #define MAX_SOFTWARE_ENDSTOP_X diff --git a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h index f8bec3aed..4583d0899 100644 --- a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -512,7 +512,6 @@ #define SD_DETECT_INVERTED #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. // Reverse SD sort to show "more recent" files first, according to the card's FAT. diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h index 352d984e9..ea8f68295 100644 --- a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h +++ b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h @@ -222,6 +222,17 @@ #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + /** * M355 Case Light on-off / brightness */ diff --git a/Marlin/src/config/examples/Tronxy/X1/Configuration.h b/Marlin/src/config/examples/Tronxy/X1/Configuration.h index 1f73233ba..40b2b9d7c 100644 --- a/Marlin/src/config/examples/Tronxy/X1/Configuration.h +++ b/Marlin/src/config/examples/Tronxy/X1/Configuration.h @@ -800,7 +800,7 @@ * - Use 'M211' to set software endstops on/off or report current state */ -// Min software endstops curtail movement below minimum coordinate bounds +// Min software endstops constrain movement within minimum coordinate bounds #define MIN_SOFTWARE_ENDSTOPS #if ENABLED(MIN_SOFTWARE_ENDSTOPS) #define MIN_SOFTWARE_ENDSTOP_X @@ -808,7 +808,7 @@ #define MIN_SOFTWARE_ENDSTOP_Z #endif -// Max software endstops curtail movement above maximum coordinate bounds +// Max software endstops constrain movement within maximum coordinate bounds #define MAX_SOFTWARE_ENDSTOPS #if ENABLED(MAX_SOFTWARE_ENDSTOPS) #define MAX_SOFTWARE_ENDSTOP_X diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h index c0629661b..254a00d1e 100644 --- a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h +++ b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h @@ -527,10 +527,12 @@ #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. - #define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order. - // if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that. - // using: - #define MENU_ADDAUTOSTART + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART /** * Sort SD file listings in alphabetical order. diff --git a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h index ddbd140b5..971870188 100644 --- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h +++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h @@ -1,4 +1,4 @@ -/** +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -939,7 +939,7 @@ * - Use 'M211' to set software endstops on/off or report current state */ -// Min software endstops curtail movement below minimum coordinate bounds +// Min software endstops constrain movement within minimum coordinate bounds //#define MIN_SOFTWARE_ENDSTOPS #if ENABLED(MIN_SOFTWARE_ENDSTOPS) #define MIN_SOFTWARE_ENDSTOP_X @@ -947,7 +947,7 @@ #define MIN_SOFTWARE_ENDSTOP_Z #endif -// Max software endstops curtail movement above maximum coordinate bounds +// Max software endstops constrain movement within maximum coordinate bounds #define MAX_SOFTWARE_ENDSTOPS #if ENABLED(MAX_SOFTWARE_ENDSTOPS) #define MAX_SOFTWARE_ENDSTOP_X diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h index 86bd299a6..6d32205f9 100644 --- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h +++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h @@ -1,4 +1,4 @@ -/** +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -1066,6 +1066,11 @@ //#define PROBE_Y_FIRST #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + // // Experimental Subdivision of the grid by Catmull-Rom method. // Synthesizes intermediate points to produce a more detailed mesh. diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index d0946b5eb..3a6bbf0bc 100644 --- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -1,4 +1,4 @@ -/** +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/src/config/examples/delta/generic/Configuration.h b/Marlin/src/config/examples/delta/generic/Configuration.h index 4d8cbc63d..fa95f1cf1 100644 --- a/Marlin/src/config/examples/delta/generic/Configuration.h +++ b/Marlin/src/config/examples/delta/generic/Configuration.h @@ -1,4 +1,4 @@ -/** +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/src/config/examples/delta/generic/Configuration_adv.h b/Marlin/src/config/examples/delta/generic/Configuration_adv.h index d0946b5eb..3a6bbf0bc 100644 --- a/Marlin/src/config/examples/delta/generic/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/generic/Configuration_adv.h @@ -1,4 +1,4 @@ -/** +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration.h index 9d4e7ea58..591b5b018 100644 --- a/Marlin/src/config/examples/delta/kossel_mini/Configuration.h +++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration.h @@ -1,4 +1,4 @@ -/** +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h index d0946b5eb..3a6bbf0bc 100644 --- a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h @@ -1,4 +1,4 @@ -/** +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/src/config/examples/delta/kossel_pro/Configuration.h b/Marlin/src/config/examples/delta/kossel_pro/Configuration.h index 24190541e..2178fe0db 100644 --- a/Marlin/src/config/examples/delta/kossel_pro/Configuration.h +++ b/Marlin/src/config/examples/delta/kossel_pro/Configuration.h @@ -1,4 +1,4 @@ -/** +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h index 331ab645c..0c1c4e702 100644 --- a/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h @@ -1,4 +1,4 @@ -/** +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration.h index bf6f22ebe..b09c78588 100644 --- a/Marlin/src/config/examples/delta/kossel_xl/Configuration.h +++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration.h @@ -1,4 +1,4 @@ -/** +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -938,7 +938,7 @@ * - Use 'M211' to set software endstops on/off or report current state */ -// Min software endstops curtail movement below minimum coordinate bounds +// Min software endstops constrain movement within minimum coordinate bounds //#define MIN_SOFTWARE_ENDSTOPS #if ENABLED(MIN_SOFTWARE_ENDSTOPS) #define MIN_SOFTWARE_ENDSTOP_X @@ -946,7 +946,7 @@ #define MIN_SOFTWARE_ENDSTOP_Z #endif -// Max software endstops curtail movement above maximum coordinate bounds +// Max software endstops constrain movement within maximum coordinate bounds #define MAX_SOFTWARE_ENDSTOPS #if ENABLED(MAX_SOFTWARE_ENDSTOPS) #define MAX_SOFTWARE_ENDSTOP_X diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h index 7e995e9ba..6c29cdeba 100644 --- a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h @@ -1,4 +1,4 @@ -/** +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h index c530d7934..6e5a76b1f 100644 --- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h +++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h @@ -823,7 +823,7 @@ * - Use 'M211' to set software endstops on/off or report current state */ -// Min software endstops curtail movement below minimum coordinate bounds +// Min software endstops constrain movement within minimum coordinate bounds //#define MIN_SOFTWARE_ENDSTOPS #if ENABLED(MIN_SOFTWARE_ENDSTOPS) #define MIN_SOFTWARE_ENDSTOP_X @@ -831,7 +831,7 @@ #define MIN_SOFTWARE_ENDSTOP_Z #endif -// Max software endstops curtail movement above maximum coordinate bounds +// Max software endstops constrain movement within maximum coordinate bounds #define MAX_SOFTWARE_ENDSTOPS #if ENABLED(MAX_SOFTWARE_ENDSTOPS) #define MAX_SOFTWARE_ENDSTOP_X diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h index 2de289eab..78cab3291 100644 --- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -1559,7 +1559,6 @@ * Fully assembled MAX7219 boards can be found on the internet for under $2(US). * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 */ - #define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display diff --git a/Marlin/src/config/examples/wt150/Configuration.h b/Marlin/src/config/examples/wt150/Configuration.h index f1bef4b46..708145844 100644 --- a/Marlin/src/config/examples/wt150/Configuration.h +++ b/Marlin/src/config/examples/wt150/Configuration.h @@ -766,7 +766,7 @@ #define INVERT_Y_DIR false #define INVERT_Z_DIR false -// Enable this option for Toshiba steppers +// Enable this option for Toshiba stepper drivers //#define CONFIG_STEPPERS_TOSHIBA // @section extruder