Fix documentation of heating sanity check

This commit is contained in:
Scott Lahteine 2015-05-08 22:50:08 -07:00
parent 6110494a56
commit 79106638a8
12 changed files with 96 additions and 60 deletions

View file

@ -14,11 +14,14 @@
#endif #endif
#define BED_CHECK_INTERVAL 5000 //ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 //ms between checks in bang-bang control
//// Heating sanity check: /**
// This waits for the watch period in milliseconds whenever an M104 or M109 increases the target temperature * Heating Sanity Check
// If the temperature has not increased at the end of that period, the target temperature is set to zero. *
// It can be reset with another M104/M109. This check is also only triggered if the target temperature and * Whenever an M104 or M109 increases the target temperature this will wait for WATCH_TEMP_PERIOD milliseconds,
// the current temperature differ by at least 2x WATCH_TEMP_INCREASE * and if the temperature hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted, requiring a
* hard reset. This test restarts with any M104/M109, but only if the current temperature is below the target
* by at least 2 * WATCH_TEMP_INCREASE degrees celsius.
*/
#define WATCH_TEMP_PERIOD 16000 // 16 seconds #define WATCH_TEMP_PERIOD 16000 // 16 seconds
#define WATCH_TEMP_INCREASE 4 // Heat up at least 4 degrees in 16 seconds #define WATCH_TEMP_INCREASE 4 // Heat up at least 4 degrees in 16 seconds

View file

@ -14,11 +14,14 @@
#endif #endif
#define BED_CHECK_INTERVAL 5000 //ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 //ms between checks in bang-bang control
//// Heating sanity check: /**
// This waits for the watch period in milliseconds whenever an M104 or M109 increases the target temperature * Heating Sanity Check
// If the temperature has not increased at the end of that period, the target temperature is set to zero. *
// It can be reset with another M104/M109. This check is also only triggered if the target temperature and * Whenever an M104 or M109 increases the target temperature this will wait for WATCH_TEMP_PERIOD milliseconds,
// the current temperature differ by at least 2x WATCH_TEMP_INCREASE * and if the temperature hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted, requiring a
* hard reset. This test restarts with any M104/M109, but only if the current temperature is below the target
* by at least 2 * WATCH_TEMP_INCREASE degrees celsius.
*/
#define WATCH_TEMP_PERIOD 16000 // 16 seconds #define WATCH_TEMP_PERIOD 16000 // 16 seconds
#define WATCH_TEMP_INCREASE 4 // Heat up at least 4 degrees in 16 seconds #define WATCH_TEMP_INCREASE 4 // Heat up at least 4 degrees in 16 seconds

View file

@ -14,11 +14,14 @@
#endif #endif
#define BED_CHECK_INTERVAL 5000 //ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 //ms between checks in bang-bang control
//// Heating sanity check: /**
// This waits for the watch period in milliseconds whenever an M104 or M109 increases the target temperature * Heating Sanity Check
// If the temperature has not increased at the end of that period, the target temperature is set to zero. *
// It can be reset with another M104/M109. This check is also only triggered if the target temperature and * Whenever an M104 or M109 increases the target temperature this will wait for WATCH_TEMP_PERIOD milliseconds,
// the current temperature differ by at least 2x WATCH_TEMP_INCREASE * and if the temperature hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted, requiring a
* hard reset. This test restarts with any M104/M109, but only if the current temperature is below the target
* by at least 2 * WATCH_TEMP_INCREASE degrees celsius.
*/
#define WATCH_TEMP_PERIOD 16000 // 16 seconds #define WATCH_TEMP_PERIOD 16000 // 16 seconds
#define WATCH_TEMP_INCREASE 4 // Heat up at least 4 degrees in 16 seconds #define WATCH_TEMP_INCREASE 4 // Heat up at least 4 degrees in 16 seconds

View file

@ -14,11 +14,14 @@
#endif #endif
#define BED_CHECK_INTERVAL 5000 //ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 //ms between checks in bang-bang control
//// Heating sanity check: /**
// This waits for the watch period in milliseconds whenever an M104 or M109 increases the target temperature * Heating Sanity Check
// If the temperature has not increased at the end of that period, the target temperature is set to zero. *
// It can be reset with another M104/M109. This check is also only triggered if the target temperature and * Whenever an M104 or M109 increases the target temperature this will wait for WATCH_TEMP_PERIOD milliseconds,
// the current temperature differ by at least 2x WATCH_TEMP_INCREASE * and if the temperature hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted, requiring a
* hard reset. This test restarts with any M104/M109, but only if the current temperature is below the target
* by at least 2 * WATCH_TEMP_INCREASE degrees celsius.
*/
#define WATCH_TEMP_PERIOD 16000 // 16 seconds #define WATCH_TEMP_PERIOD 16000 // 16 seconds
#define WATCH_TEMP_INCREASE 4 // Heat up at least 4 degrees in 16 seconds #define WATCH_TEMP_INCREASE 4 // Heat up at least 4 degrees in 16 seconds

View file

@ -14,11 +14,14 @@
#endif #endif
#define BED_CHECK_INTERVAL 5000 //ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 //ms between checks in bang-bang control
//// Heating sanity check: /**
// This waits for the watch period in milliseconds whenever an M104 or M109 increases the target temperature * Heating Sanity Check
// If the temperature has not increased at the end of that period, the target temperature is set to zero. *
// It can be reset with another M104/M109. This check is also only triggered if the target temperature and * Whenever an M104 or M109 increases the target temperature this will wait for WATCH_TEMP_PERIOD milliseconds,
// the current temperature differ by at least 2x WATCH_TEMP_INCREASE * and if the temperature hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted, requiring a
* hard reset. This test restarts with any M104/M109, but only if the current temperature is below the target
* by at least 2 * WATCH_TEMP_INCREASE degrees celsius.
*/
#define WATCH_TEMP_PERIOD 16000 // 16 seconds #define WATCH_TEMP_PERIOD 16000 // 16 seconds
#define WATCH_TEMP_INCREASE 4 // Heat up at least 4 degrees in 16 seconds #define WATCH_TEMP_INCREASE 4 // Heat up at least 4 degrees in 16 seconds

View file

@ -14,11 +14,14 @@
#endif #endif
#define BED_CHECK_INTERVAL 3000 //ms between checks in bang-bang control #define BED_CHECK_INTERVAL 3000 //ms between checks in bang-bang control
//// Heating sanity check: /**
// This waits for the watch period in milliseconds whenever an M104 or M109 increases the target temperature * Heating Sanity Check
// If the temperature has not increased at the end of that period, the target temperature is set to zero. *
// It can be reset with another M104/M109. This check is also only triggered if the target temperature and * Whenever an M104 or M109 increases the target temperature this will wait for WATCH_TEMP_PERIOD milliseconds,
// the current temperature differ by at least 2x WATCH_TEMP_INCREASE * and if the temperature hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted, requiring a
* hard reset. This test restarts with any M104/M109, but only if the current temperature is below the target
* by at least 2 * WATCH_TEMP_INCREASE degrees celsius.
*/
#define WATCH_TEMP_PERIOD 16000 // 16 seconds #define WATCH_TEMP_PERIOD 16000 // 16 seconds
#define WATCH_TEMP_INCREASE 4 // Heat up at least 4 degrees in 16 seconds #define WATCH_TEMP_INCREASE 4 // Heat up at least 4 degrees in 16 seconds

View file

@ -14,11 +14,14 @@
#endif #endif
#define BED_CHECK_INTERVAL 5000 //ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 //ms between checks in bang-bang control
//// Heating sanity check: /**
// This waits for the watch period in milliseconds whenever an M104 or M109 increases the target temperature * Heating Sanity Check
// If the temperature has not increased at the end of that period, the target temperature is set to zero. *
// It can be reset with another M104/M109. This check is also only triggered if the target temperature and * Whenever an M104 or M109 increases the target temperature this will wait for WATCH_TEMP_PERIOD milliseconds,
// the current temperature differ by at least 2x WATCH_TEMP_INCREASE * and if the temperature hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted, requiring a
* hard reset. This test restarts with any M104/M109, but only if the current temperature is below the target
* by at least 2 * WATCH_TEMP_INCREASE degrees celsius.
*/
#define WATCH_TEMP_PERIOD 16000 // 16 seconds #define WATCH_TEMP_PERIOD 16000 // 16 seconds
#define WATCH_TEMP_INCREASE 4 // Heat up at least 4 degrees in 16 seconds #define WATCH_TEMP_INCREASE 4 // Heat up at least 4 degrees in 16 seconds

View file

@ -14,11 +14,14 @@
#endif #endif
#define BED_CHECK_INTERVAL 5000 //ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 //ms between checks in bang-bang control
//// Heating sanity check: /**
// This waits for the watch period in milliseconds whenever an M104 or M109 increases the target temperature * Heating Sanity Check
// If the temperature has not increased at the end of that period, the target temperature is set to zero. *
// It can be reset with another M104/M109. This check is also only triggered if the target temperature and * Whenever an M104 or M109 increases the target temperature this will wait for WATCH_TEMP_PERIOD milliseconds,
// the current temperature differ by at least 2x WATCH_TEMP_INCREASE * and if the temperature hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted, requiring a
* hard reset. This test restarts with any M104/M109, but only if the current temperature is below the target
* by at least 2 * WATCH_TEMP_INCREASE degrees celsius.
*/
#define WATCH_TEMP_PERIOD 16000 // 16 seconds #define WATCH_TEMP_PERIOD 16000 // 16 seconds
#define WATCH_TEMP_INCREASE 4 // Heat up at least 4 degrees in 16 seconds #define WATCH_TEMP_INCREASE 4 // Heat up at least 4 degrees in 16 seconds

View file

@ -14,11 +14,14 @@
#endif #endif
#define BED_CHECK_INTERVAL 5000 //ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 //ms between checks in bang-bang control
//// Heating sanity check: /**
// This waits for the watch period in milliseconds whenever an M104 or M109 increases the target temperature * Heating Sanity Check
// If the temperature has not increased at the end of that period, the target temperature is set to zero. *
// It can be reset with another M104/M109. This check is also only triggered if the target temperature and * Whenever an M104 or M109 increases the target temperature this will wait for WATCH_TEMP_PERIOD milliseconds,
// the current temperature differ by at least 2x WATCH_TEMP_INCREASE * and if the temperature hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted, requiring a
* hard reset. This test restarts with any M104/M109, but only if the current temperature is below the target
* by at least 2 * WATCH_TEMP_INCREASE degrees celsius.
*/
#define WATCH_TEMP_PERIOD 16000 // 16 seconds #define WATCH_TEMP_PERIOD 16000 // 16 seconds
#define WATCH_TEMP_INCREASE 4 // Heat up at least 4 degrees in 16 seconds #define WATCH_TEMP_INCREASE 4 // Heat up at least 4 degrees in 16 seconds

View file

@ -14,11 +14,14 @@
#endif #endif
#define BED_CHECK_INTERVAL 5000 //ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 //ms between checks in bang-bang control
//// Heating sanity check: /**
// This waits for the watch period in milliseconds whenever an M104 or M109 increases the target temperature * Heating Sanity Check
// If the temperature has not increased at the end of that period, the target temperature is set to zero. *
// It can be reset with another M104/M109. This check is also only triggered if the target temperature and * Whenever an M104 or M109 increases the target temperature this will wait for WATCH_TEMP_PERIOD milliseconds,
// the current temperature differ by at least 2x WATCH_TEMP_INCREASE * and if the temperature hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted, requiring a
* hard reset. This test restarts with any M104/M109, but only if the current temperature is below the target
* by at least 2 * WATCH_TEMP_INCREASE degrees celsius.
*/
#define WATCH_TEMP_PERIOD 16000 // 16 seconds #define WATCH_TEMP_PERIOD 16000 // 16 seconds
#define WATCH_TEMP_INCREASE 4 // Heat up at least 4 degrees in 16 seconds #define WATCH_TEMP_INCREASE 4 // Heat up at least 4 degrees in 16 seconds

View file

@ -14,11 +14,14 @@
#endif #endif
#define BED_CHECK_INTERVAL 5000 //ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 //ms between checks in bang-bang control
//// Heating sanity check: /**
// This waits for the watch period in milliseconds whenever an M104 or M109 increases the target temperature * Heating Sanity Check
// If the temperature has not increased at the end of that period, the target temperature is set to zero. *
// It can be reset with another M104/M109. This check is also only triggered if the target temperature and * Whenever an M104 or M109 increases the target temperature this will wait for WATCH_TEMP_PERIOD milliseconds,
// the current temperature differ by at least 2x WATCH_TEMP_INCREASE * and if the temperature hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted, requiring a
* hard reset. This test restarts with any M104/M109, but only if the current temperature is below the target
* by at least 2 * WATCH_TEMP_INCREASE degrees celsius.
*/
#define WATCH_TEMP_PERIOD 16000 // 16 seconds #define WATCH_TEMP_PERIOD 16000 // 16 seconds
#define WATCH_TEMP_INCREASE 4 // Heat up at least 4 degrees in 16 seconds #define WATCH_TEMP_INCREASE 4 // Heat up at least 4 degrees in 16 seconds

View file

@ -14,11 +14,14 @@
#endif #endif
#define BED_CHECK_INTERVAL 5000 //ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 //ms between checks in bang-bang control
//// Heating sanity check: /**
// This waits for the watch period in milliseconds whenever an M104 or M109 increases the target temperature * Heating Sanity Check
// If the temperature has not increased at the end of that period, the target temperature is set to zero. *
// It can be reset with another M104/M109. This check is also only triggered if the target temperature and * Whenever an M104 or M109 increases the target temperature this will wait for WATCH_TEMP_PERIOD milliseconds,
// the current temperature differ by at least 2x WATCH_TEMP_INCREASE * and if the temperature hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted, requiring a
* hard reset. This test restarts with any M104/M109, but only if the current temperature is below the target
* by at least 2 * WATCH_TEMP_INCREASE degrees celsius.
*/
#define WATCH_TEMP_PERIOD 16000 // 16 seconds #define WATCH_TEMP_PERIOD 16000 // 16 seconds
#define WATCH_TEMP_INCREASE 4 // Heat up at least 4 degrees in 16 seconds #define WATCH_TEMP_INCREASE 4 // Heat up at least 4 degrees in 16 seconds