diff --git a/Marlin/src/feature/bltouch.cpp b/Marlin/src/feature/bltouch.cpp
index b768fc3e8..64c052269 100644
--- a/Marlin/src/feature/bltouch.cpp
+++ b/Marlin/src/feature/bltouch.cpp
@@ -110,19 +110,19 @@ bool BLTouch::triggered() {
 
 bool BLTouch::deploy_proc() {
   // Do a DEPLOY
-  if (DEBUGGING(LEVELING)) DEBUG_ECHOLN("BLTouch DEPLOY requested");
+  if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("BLTouch DEPLOY requested");
 
   // Attempt to DEPLOY, wait for DEPLOY_DELAY or ALARM
   if (_deploy_query_alarm()) {
     // The deploy might have failed or the probe is already triggered (nozzle too low?)
-    if (DEBUGGING(LEVELING)) DEBUG_ECHOLN("BLTouch ALARM or TRIGGER after DEPLOY, recovering");
+    if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("BLTouch ALARM or TRIGGER after DEPLOY, recovering");
 
     clear();                               // Get the probe into start condition
 
     // Last attempt to DEPLOY
     if (_deploy_query_alarm()) {
       // The deploy might have failed or the probe is actually triggered (nozzle too low?) again
-      if (DEBUGGING(LEVELING)) DEBUG_ECHOLN("BLTouch Recovery Failed");
+      if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("BLTouch Recovery Failed");
 
       SERIAL_ERROR_MSG(MSG_STOP_BLTOUCH);  // Tell the user something is wrong, needs action
       stop();                              // but it's not too bad, no need to kill, allow restart
@@ -140,14 +140,14 @@ bool BLTouch::deploy_proc() {
   // The trigger STOW (see motion.cpp for example) will pull up the probes pin as soon as the pulse
   // is registered.
 
-  if (DEBUGGING(LEVELING)) DEBUG_ECHOLN("bltouch.deploy_proc() end");
+  if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("bltouch.deploy_proc() end");
 
   return false; // report success to caller
 }
 
 bool BLTouch::stow_proc() {
   // Do a STOW
-  if (DEBUGGING(LEVELING)) DEBUG_ECHOLN("BLTouch STOW requested");
+  if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("BLTouch STOW requested");
 
   // A STOW will clear a triggered condition in the probe (10ms pulse).
   // At the moment that we come in here, we might (pulse) or will (SW mode) see the trigger on the pin.
@@ -158,7 +158,7 @@ bool BLTouch::stow_proc() {
   // Attempt to STOW, wait for STOW_DELAY or ALARM
   if (_stow_query_alarm()) {
     // The stow might have failed
-    if (DEBUGGING(LEVELING)) DEBUG_ECHOLN("BLTouch ALARM or TRIGGER after STOW, recovering");
+    if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("BLTouch ALARM or TRIGGER after STOW, recovering");
 
     _reset();                              // This RESET will then also pull up the pin. If it doesn't
                                            // work and the pin is still down, there will no longer be
@@ -167,7 +167,7 @@ bool BLTouch::stow_proc() {
     // Last attempt to STOW
     if (_stow_query_alarm()) {             // so if there is now STILL an ALARM condition:
 
-      if (DEBUGGING(LEVELING)) DEBUG_ECHOLN("BLTouch Recovery Failed");
+      if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("BLTouch Recovery Failed");
 
       SERIAL_ERROR_MSG(MSG_STOP_BLTOUCH);  // Tell the user something is wrong, needs action
       stop();                              // but it's not too bad, no need to kill, allow restart
@@ -176,7 +176,7 @@ bool BLTouch::stow_proc() {
     }
   }
 
-  if (DEBUGGING(LEVELING)) DEBUG_ECHOLN("bltouch.stow_proc() end");
+  if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("bltouch.stow_proc() end");
 
   return false; // report success to caller
 }
@@ -187,7 +187,7 @@ bool BLTouch::status_proc() {
    * This function will ensure switch state is reset after execution
    */
 
-  if (DEBUGGING(LEVELING)) DEBUG_ECHOLN("BLTouch STATUS requested");
+  if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("BLTouch STATUS requested");
 
   _set_SW_mode();              // Incidentally, _set_SW_mode() will also RESET any active alarm
   const bool tr = triggered(); // If triggered in SW mode, the pin is up, it is STOWED
diff --git a/Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplay.cpp b/Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplay.cpp
index ceac9c9d2..95d5bc503 100644
--- a/Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplay.cpp
+++ b/Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplay.cpp
@@ -313,7 +313,7 @@ void DGUSScreenVariableHandler::DGUSLCD_SendStringToDisplayPGM(DGUS_VP_Variable
       DEBUG_ECHOPAIR("new topfile calculated:", top_file);
       if (top_file < 0) {
         top_file = 0;
-        DEBUG_ECHOLN("Top of filelist reached");
+        DEBUG_ECHOLNPGM("Top of filelist reached");
       }
       else {
         int16_t max_top = filelist.count() -  DGUS_SD_FILESPERSCREEN;
@@ -579,7 +579,7 @@ void DGUSScreenVariableHandler::HandleManualMove(DGUS_VP_Variable &var, void *va
     buf[4] = axiscode;
     //DEBUG_ECHOPAIR(" ", buf);
     while (!enqueue_and_echo_command(buf)) idle();
-    //DEBUG_ECHOLN(" ✓");
+    //DEBUG_ECHOLNPGM(" ✓");
     ScreenHandler.ForceCompleteUpdate();
     return;
   }
@@ -588,7 +588,7 @@ void DGUSScreenVariableHandler::HandleManualMove(DGUS_VP_Variable &var, void *va
     DEBUG_ECHOPAIR(" move ", axiscode);
     bool old_relative_mode = relative_mode;
     if (!relative_mode) {
-      //DEBUG_ECHO(" G91");
+      //DEBUG_ECHOPGM(" G91");
       while (!enqueue_and_echo_command("G91")) idle();
       //DEBUG_ECHOPGM(" ✓ ");
     }
@@ -601,18 +601,18 @@ void DGUSScreenVariableHandler::HandleManualMove(DGUS_VP_Variable &var, void *va
     snprintf_P(buf, 32, PSTR("G0 %c%s%d.%02d F%d"), axiscode, sign, value, fraction, speed);
     //DEBUG_ECHOPAIR(" ", buf);
     while (!enqueue_and_echo_command(buf)) idle();
-    //DEBUG_ECHOLN(" ✓ ");
+    //DEBUG_ECHOLNPGM(" ✓ ");
     if (backup_speed != speed) {
       snprintf_P(buf, 32, PSTR("G0 F%d"), backup_speed);
       while (!enqueue_and_echo_command(buf)) idle();
       //DEBUG_ECHOPAIR(" ", buf);
     }
     //while (!enqueue_and_echo_command(buf)) idle();
-    //DEBUG_ECHOLN(" ✓ ");
+    //DEBUG_ECHOLNPGM(" ✓ ");
     if (!old_relative_mode) {
-      //DEBUG_ECHO("G90");
+      //DEBUG_ECHOPGM("G90");
       while (!enqueue_and_echo_command("G90")) idle();
-      //DEBUG_ECHO(" ✓ ");
+      //DEBUG_ECHOPGM(" ✓ ");
     }
   }