From 799360c5765bd317329543287cb81d4991d29037 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sat, 14 Oct 2017 18:44:03 -0500 Subject: [PATCH] Enhance Teensy/RAMPS pins files --- Marlin/src/pins/pins_RAMPS.h | 2 +- Marlin/src/pins/pins_TEENSY35_36.h | 46 ++++++++++++++++++++---------- 2 files changed, 32 insertions(+), 16 deletions(-) diff --git a/Marlin/src/pins/pins_RAMPS.h b/Marlin/src/pins/pins_RAMPS.h index 7371fe835..5b83176f4 100644 --- a/Marlin/src/pins/pins_RAMPS.h +++ b/Marlin/src/pins/pins_RAMPS.h @@ -45,7 +45,7 @@ */ #if ENABLED(IS_REARM) - #error "Oops! use 'pins_RAMPS_RE_ARM.h' when Re-Arm is used." + #error "Oops! Use 'BOARD_RAMPS_RE_ARM' to build for Re-ARM." #endif #if !ENABLED(IS_RAMPS_SMART) && !ENABLED(IS_RAMPS_DUO) && !ENABLED(IS_RAMPS4DUE) && !ENABLED(TARGET_LPC1768) diff --git a/Marlin/src/pins/pins_TEENSY35_36.h b/Marlin/src/pins/pins_TEENSY35_36.h index b61f1ef85..57abfa5ae 100644 --- a/Marlin/src/pins/pins_TEENSY35_36.h +++ b/Marlin/src/pins/pins_TEENSY35_36.h @@ -1,15 +1,33 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + /**************************************************************************************** * Teensy 3.5 (MK64FX512) and Teensy 3.6 (MK66FX1M0) Breadboard pin assignments * Requires the Teensyduino software with Teensy 3.5 or Teensy 3.6 selected in Arduino IDE! * http://www.pjrc.com/teensy/teensyduino.html -* ****************************************************************************************/ -#if MOTHERBOARD == 841 // BOARD_TEENSY35_36 -#define KNOWN_BOARD 1 -#define AT90USB 1286 // Disable MarlinSerial etc. #if !IS_32BIT_TEENSY - #error Oops! Make sure you have 'Teensy 3.5' or 'Teensy 3.6' selected from the 'Tools -> Boards' menu. + #error "Oops! Make sure you have 'Teensy 3.5' or 'Teensy 3.6' selected from the 'Tools -> Boards' menu." #endif #if IS_TEENSY35 @@ -18,12 +36,13 @@ #define BOARD_NAME "Teensy3.6" #endif -#define LARGE_FLASH true +#define AT90USB 1286 // Disable MarlinSerial etc. #define USBCON //1286 // Disable MarlinSerial etc. +#define LARGE_FLASH true /* -teemuatlut plan for Teensy3.5 and Teensy3.6: + teemuatlut plan for Teensy3.5 and Teensy3.6: USB GND |-----#####-----| VIN 5V X_STEP_PIN MOSI1 RX1 0 | ##### | Analog GND @@ -84,7 +103,6 @@ D8 HEATER_BED_PIN CS1 RX4 A12 31 | 46 * * 47 | 34 A15 PWM #define HEATER_0_PIN 30 #define HEATER_1_PIN 36 -#define HEATER_2_PIN -1 #define HEATER_BED_PIN 31 #define FAN_PIN 2 @@ -93,27 +111,27 @@ D8 HEATER_BED_PIN CS1 RX4 A12 31 | 46 * * 47 | 34 A15 PWM #define Z_STOP_PIN 28 #define TEMP_0_PIN 2 // Extruder / Analog pin numbering: 2 => A2 -#define TEMP_BED_PIN 1 // Bed / Analog pin numbering #define TEMP_1_PIN 0 -#define TEMP_2_PIN -1 +#define TEMP_BED_PIN 1 // Bed / Analog pin numbering -#define SDPOWER -1 -#define SD_DETECT_PIN -1 #define SDSS 39 // 8 #define LED_PIN 13 #define PS_ON_PIN 1 -#define KILL_PIN -1 #define ALARM_PIN -1 #define FILWIDTH_PIN 6 #define SOL1_PIN 28 +#if 0 +// Pretty sure this is obsolete! +// Please use Marlin 1.1.x pins files as reference for new pins files. #ifndef SDSUPPORT // these are defined in the SD library if building with SD support #define SCK_PIN 13 #define MISO_PIN 12 #define MOSI_PIN 11 #endif +#endif #ifdef ULTRA_LCD #define LCD_PINS_RS 40 @@ -126,5 +144,3 @@ D8 HEATER_BED_PIN CS1 RX4 A12 31 | 46 * * 47 | 34 A15 PWM #define BTN_EN2 47 #define BTN_ENC 48 #endif - -#endif // MOTHERBOARD == 841 (Teensy3.5 and Teensy3.6)