Removes some minor GCC warnings

This commit is contained in:
João Brázio 2016-07-19 03:03:11 +01:00
parent 46117593b9
commit 79e7721b76

View file

@ -5325,7 +5325,7 @@ inline void gcode_M200() {
if (volumetric_enabled) { if (volumetric_enabled) {
filament_size[target_extruder] = code_value_linear_units(); filament_size[target_extruder] = code_value_linear_units();
// make sure all extruders have some sane value for the filament size // make sure all extruders have some sane value for the filament size
for (int i = 0; i < COUNT(filament_size); i++) for (uint8_t i = 0; i < COUNT(filament_size); i++)
if (! filament_size[i]) filament_size[i] = DEFAULT_NOMINAL_FILAMENT_DIA; if (! filament_size[i]) filament_size[i] = DEFAULT_NOMINAL_FILAMENT_DIA;
} }
} }
@ -6825,7 +6825,7 @@ inline void gcode_T(uint8_t tmp_extruder) {
// <0 if the new nozzle is higher, >0 if lower. A bigger raise when lower. // <0 if the new nozzle is higher, >0 if lower. A bigger raise when lower.
float z_diff = hotend_offset[Z_AXIS][active_extruder] - hotend_offset[Z_AXIS][tmp_extruder], float z_diff = hotend_offset[Z_AXIS][active_extruder] - hotend_offset[Z_AXIS][tmp_extruder],
z_raise = 0.3 + (z_diff > 0.0 ? z_diff : 0.0); z_raise = 0.3 + (z_diff > 0.0 ? z_diff : 0.0);
// Always raise by some amount // Always raise by some amount
planner.buffer_line( planner.buffer_line(
current_position[X_AXIS], current_position[X_AXIS],
@ -6836,10 +6836,10 @@ inline void gcode_T(uint8_t tmp_extruder) {
active_extruder active_extruder
); );
stepper.synchronize(); stepper.synchronize();
move_extruder_servo(active_extruder); move_extruder_servo(active_extruder);
delay(500); delay(500);
// Move back down, if needed // Move back down, if needed
if (z_raise != z_diff) { if (z_raise != z_diff) {
planner.buffer_line( planner.buffer_line(
@ -6853,7 +6853,7 @@ inline void gcode_T(uint8_t tmp_extruder) {
stepper.synchronize(); stepper.synchronize();
} }
#endif #endif
/** /**
* Set current_position to the position of the new nozzle. * Set current_position to the position of the new nozzle.
* Offsets are based on linear distance, so we need to get * Offsets are based on linear distance, so we need to get
@ -6906,7 +6906,7 @@ inline void gcode_T(uint8_t tmp_extruder) {
current_position[Z_AXIS] += offset_vec.z; current_position[Z_AXIS] += offset_vec.z;
#else // !AUTO_BED_LEVELING_FEATURE #else // !AUTO_BED_LEVELING_FEATURE
float xydiff[2] = { float xydiff[2] = {
hotend_offset[X_AXIS][tmp_extruder] - hotend_offset[X_AXIS][active_extruder], hotend_offset[X_AXIS][tmp_extruder] - hotend_offset[X_AXIS][active_extruder],
hotend_offset[Y_AXIS][tmp_extruder] - hotend_offset[Y_AXIS][active_extruder] hotend_offset[Y_AXIS][tmp_extruder] - hotend_offset[Y_AXIS][active_extruder]
@ -6930,7 +6930,7 @@ inline void gcode_T(uint8_t tmp_extruder) {
} }
#endif // MESH_BED_LEVELING #endif // MESH_BED_LEVELING
#endif // !AUTO_BED_LEVELING_FEATURE #endif // !AUTO_BED_LEVELING_FEATURE
#if ENABLED(DEBUG_LEVELING_FEATURE) #if ENABLED(DEBUG_LEVELING_FEATURE)
@ -6993,7 +6993,7 @@ inline void gcode_T(uint8_t tmp_extruder) {
SERIAL_ECHOLNPGM("<<< gcode_T"); SERIAL_ECHOLNPGM("<<< gcode_T");
} }
#endif #endif
SERIAL_ECHO_START; SERIAL_ECHO_START;
SERIAL_ECHOPGM(MSG_ACTIVE_EXTRUDER); SERIAL_ECHOPGM(MSG_ACTIVE_EXTRUDER);
SERIAL_PROTOCOLLN((int)active_extruder); SERIAL_PROTOCOLLN((int)active_extruder);
@ -8695,6 +8695,6 @@ float calculate_volumetric_multiplier(float diameter) {
} }
void calculate_volumetric_multipliers() { void calculate_volumetric_multipliers() {
for (int i = 0; i < COUNT(filament_size); i++) for (uint8_t i = 0; i < COUNT(filament_size); i++)
volumetric_multiplier[i] = calculate_volumetric_multiplier(filament_size[i]); volumetric_multiplier[i] = calculate_volumetric_multiplier(filament_size[i]);
} }