Show nozzles, heaters, and extruders numbered 1-4

This commit is contained in:
Scott Lahteine 2015-09-11 19:52:01 -07:00 committed by Richard Wackerbarth
parent 5bc480fee8
commit 7ac7ddbf20
21 changed files with 128 additions and 205 deletions

View file

@ -82,9 +82,7 @@
#define MSG_MOTION "Movimiento"
#define MSG_VOLUMETRIC "Filament"
#define MSG_VOLUMETRIC_ENABLED "E in mm3"
#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Fil. Dia. 1"
#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Fil. Dia. 2"
#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Fil. Dia. 3"
#define MSG_FILAMENT_DIAM "Fil. Dia."
#define MSG_CONTRAST "Contrast"
#define MSG_STORE_EPROM "Alzar Memoria"
#define MSG_LOAD_EPROM "Cargar Memoria"

View file

@ -83,9 +83,7 @@
#define MSG_MOTION "Движение"
#define MSG_VOLUMETRIC "Нишка"
#define MSG_VOLUMETRIC_ENABLED "E in mm3"
#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Диам. нишка 1"
#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Диам. нишка 2"
#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Диам. нишка 3"
#define MSG_FILAMENT_DIAM "Диам. нишка"
#define MSG_CONTRAST "LCD контраст"
#define MSG_STORE_EPROM "Запази в EPROM"
#define MSG_LOAD_EPROM "Зареди от EPROM"

View file

@ -83,9 +83,7 @@
#define MSG_MOTION "Moviment"
#define MSG_VOLUMETRIC "Filament"
#define MSG_VOLUMETRIC_ENABLED "E in mm3"
#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Fil. Dia. 1"
#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Fil. Dia. 2"
#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Fil. Dia. 3"
#define MSG_FILAMENT_DIAM "Fil. Dia."
#define MSG_CONTRAST "Contrast de LCD"
#define MSG_STORE_EPROM "Desar a memoria"
#define MSG_LOAD_EPROM "Carregar de mem."

View file

@ -30,10 +30,6 @@
#define MSG_PREHEAT_ABS_ALL MSG_PREHEAT_ABS " \xc5\xc6"
#define MSG_PREHEAT_ABS_BEDONLY MSG_PREHEAT_ABS " \xbe\xc6"
#define MSG_PREHEAT_ABS_SETTINGS MSG_PREHEAT_ABS " \xbe\xbf"
#define MSG_H1 "1"
#define MSG_H2 "2"
#define MSG_H3 "3"
#define MSG_H4 "4"
#define MSG_COOLDOWN "\xc8\xc9"
#define MSG_SWITCH_PS_ON "\xb9\xcb\xca\xb3"
#define MSG_SWITCH_PS_OFF "\xb9\xcb\xb5\xb6"
@ -50,11 +46,6 @@
#define MSG_MOVE_10MM "\xc1\xb2 10mm"
#define MSG_SPEED "\xd1\xd2"
#define MSG_NOZZLE "\xd3\xd4"
#define MSG_N0 " 0"
#define MSG_N1 " 1"
#define MSG_N2 " 2"
#define MSG_N3 " 3"
#define MSG_N4 " 4"
#define MSG_BED "\xc4\xc7"
#define MSG_FAN_SPEED "\xd5\xd6\xd1\xd2"
#define MSG_FLOW "\xcc\xad\xd1\xd2"
@ -69,9 +60,6 @@
#define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
#define MSG_E2 " E2"
#define MSG_E3 " E3"
#define MSG_E4 " E4"
#define MSG_ACC "Accel"
#define MSG_VXY_JERK "Vxy-jerk"
#define MSG_VZ_JERK "Vz-jerk"
@ -94,10 +82,7 @@
#define MSG_MOTION "\xdf\xb2"
#define MSG_VOLUMETRIC "Filament"
#define MSG_VOLUMETRIC_ENABLED "E in mm3"
#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Fil. Dia. 1"
#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Fil. Dia. 2"
#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Fil. Dia. 3"
#define MSG_FILAMENT_SIZE_EXTRUDER_3 "Fil. Dia. 4"
#define MSG_FILAMENT_DIAM "Fil. Dia."
#define MSG_CONTRAST "LCD contrast"
#define MSG_STORE_EPROM "Store memory"
#define MSG_LOAD_EPROM "Load memory"

View file

@ -2,7 +2,7 @@
* Czech
*
* LCD Menu Messages
* Se also documentation/LCDLanguageFont.md
* See also documentation/LCDLanguageFont.md
*
* Translated by Petr Zahradnik, Computer Laboratory
* Blog and video blog Zahradnik se bavi
@ -36,10 +36,6 @@
#define MSG_PREHEAT_ABS_ALL MSG_PREHEAT_ABS " Vse"
#define MSG_PREHEAT_ABS_BEDONLY MSG_PREHEAT_ABS " Podloz"
#define MSG_PREHEAT_ABS_SETTINGS MSG_PREHEAT_ABS " Nast"
#define MSG_H1 "1"
#define MSG_H2 "2"
#define MSG_H3 "3"
#define MSG_H4 "4"
#define MSG_COOLDOWN "Zchladit"
#define MSG_SWITCH_PS_ON "Zapnout napajeni"
#define MSG_SWITCH_PS_OFF "Vypnout napajeni"
@ -51,19 +47,11 @@
#define MSG_MOVE_Y "Posunout Y"
#define MSG_MOVE_Z "Posunout Z"
#define MSG_MOVE_E "Extruder"
#define MSG_MOVE_E1 "Extruder1"
#define MSG_MOVE_E2 "Extruder2"
#define MSG_MOVE_E3 "Extruder3"
#define MSG_MOVE_01MM "Posunout o 0,1mm"
#define MSG_MOVE_1MM "Posunout o 1mm"
#define MSG_MOVE_10MM "Posunout o 10mm"
#define MSG_SPEED "Rychlost"
#define MSG_NOZZLE "Tryska"
#define MSG_N0 " 0"
#define MSG_N1 " 1"
#define MSG_N2 " 2"
#define MSG_N3 " 3"
#define MSG_N4 " 4"
#define MSG_BED "Podlozka"
#define MSG_FAN_SPEED "Rychlost vent."
#define MSG_FLOW "Prutok"
@ -78,9 +66,6 @@
#define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
#define MSG_E2 " E2"
#define MSG_E3 " E3"
#define MSG_E4 " E4"
#define MSG_ACC "Zrychl"
#define MSG_VXY_JERK "Vxy-jerk"
#define MSG_VZ_JERK "Vz-jerk"
@ -103,10 +88,7 @@
#define MSG_MOTION "Pohyb"
#define MSG_VOLUMETRIC "Filament"
#define MSG_VOLUMETRIC_ENABLED "E na mm3"
#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Fil. Prum. 1"
#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Fil. Prum. 2"
#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Fil. Prum. 3"
#define MSG_FILAMENT_SIZE_EXTRUDER_3 "Fil. Prum. 4"
#define MSG_FILAMENT_DIAM "Fil. Prum."
#define MSG_CONTRAST "Kontrast LCD"
#define MSG_STORE_EPROM "Ulozit nastaveni"
#define MSG_LOAD_EPROM "Nacist nastaveni"

View file

@ -42,8 +42,6 @@
#define MSG_MOVE_Y "Flyt Y"
#define MSG_MOVE_Z "Flyt Z"
#define MSG_MOVE_E "Extruder"
#define MSG_MOVE_E1 "Extruder2"
#define MSG_MOVE_E2 "Extruder3"
#define MSG_MOVE_01MM "Flyt 0.1mm"
#define MSG_MOVE_1MM "Flyt 1mm"
#define MSG_MOVE_10MM "Flyt 10mm"
@ -54,9 +52,6 @@
#define MSG_BED "Plade"
#define MSG_FAN_SPEED "Blæser hastighed"
#define MSG_FLOW "Flow"
#define MSG_FLOW0 "Flow 0"
#define MSG_FLOW1 "Flow 1"
#define MSG_FLOW2 "Flow 2"
#define MSG_CONTROL "Kontrol"
#define MSG_MIN " \002 Min"
#define MSG_MAX " \002 Max"
@ -89,9 +84,7 @@
#define MSG_MOTION "Motion"
#define MSG_VOLUMETRIC "Filament"
#define MSG_VOLUMETRIC_ENABLED "E in mm3"
#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Fil. Dia. 1"
#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Fil. Dia. 2"
#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Fil. Dia. 3"
#define MSG_FILAMENT_DIAM "Fil. Dia."
#define MSG_CONTRAST "LCD kontrast"
#define MSG_STORE_EPROM "Gem i EEPROM"
#define MSG_LOAD_EPROM "Hent fra EEPROM"

View file

@ -81,9 +81,7 @@
#define MSG_MOTION "Bewegung"
#define MSG_VOLUMETRIC "Filament"
#define MSG_VOLUMETRIC_ENABLED "E in mm³"
#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Filament D 1"
#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Filament D 2"
#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Filament D 3"
#define MSG_FILAMENT_DIAM "Filament D"
#define MSG_CONTRAST "LCD Kontrast"
#define MSG_STORE_EPROM "EPROM speichern"
#define MSG_LOAD_EPROM "EPROM laden"

View file

@ -120,21 +120,18 @@
#ifndef MSG_MOVE_E
#define MSG_MOVE_E "Extruder"
#endif
#if EXTRUDERS > 1
#ifndef MSG_MOVE_E1
#define MSG_MOVE_E1 "Extruder1"
#endif
#if EXTRUDERS > 2
#ifndef MSG_MOVE_E2
#define MSG_MOVE_E2 "Extruder2"
#endif
#if EXTRUDERS > 3
#ifndef MSG_MOVE_E3
#define MSG_MOVE_E3 "Extruder3"
#endif
#endif
#endif // EXTRUDERS > 2
#endif // EXTRUDERS > 1
#ifndef MSG_MOVE_E1
#define MSG_MOVE_E1 "1"
#endif
#ifndef MSG_MOVE_E2
#define MSG_MOVE_E2 "2"
#endif
#ifndef MSG_MOVE_E3
#define MSG_MOVE_E3 "3"
#endif
#ifndef MSG_MOVE_E4
#define MSG_MOVE_E4 "4"
#endif
#ifndef MSG_MOVE_01MM
#define MSG_MOVE_01MM "Move 0.1mm"
#endif
@ -150,9 +147,6 @@
#ifndef MSG_NOZZLE
#define MSG_NOZZLE "Nozzle"
#endif
#ifndef MSG_N0
#define MSG_N0 " 0"
#endif
#ifndef MSG_N1
#define MSG_N1 " 1"
#endif
@ -207,6 +201,9 @@
#ifndef MSG_PID_C
#define MSG_PID_C "PID-C"
#endif
#ifndef MSG_E1
#define MSG_E1 " E1"
#endif
#ifndef MSG_E2
#define MSG_E2 " E2"
#endif
@ -282,17 +279,20 @@
#ifndef MSG_VOLUMETRIC_ENABLED
#define MSG_VOLUMETRIC_ENABLED "E in mm3"
#endif
#ifndef MSG_FILAMENT_SIZE_EXTRUDER_0
#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Fil. Dia. 1"
#ifndef MSG_FILAMENT_DIAM
#define MSG_FILAMENT_DIAM "Fil. Dia."
#endif
#ifndef MSG_FILAMENT_SIZE_EXTRUDER_1
#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Fil. Dia. 2"
#ifndef MSG_DIAM_E1
#define MSG_DIAM_E1 " 1"
#endif
#ifndef MSG_FILAMENT_SIZE_EXTRUDER_2
#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Fil. Dia. 3"
#ifndef MSG_DIAM_E2
#define MSG_DIAM_E2 " 2"
#endif
#ifndef MSG_FILAMENT_SIZE_EXTRUDER_3
#define MSG_FILAMENT_SIZE_EXTRUDER_3 "Fil. Dia. 4"
#ifndef MSG_DIAM_E3
#define MSG_DIAM_E3 " 3"
#endif
#ifndef MSG_DIAM_E4
#define MSG_DIAM_E4 " 4"
#endif
#ifndef MSG_CONTRAST
#define MSG_CONTRAST "LCD contrast"

View file

@ -82,9 +82,7 @@
#define MSG_MOTION "Movimiento"
#define MSG_VOLUMETRIC "Filamento"
#define MSG_VOLUMETRIC_ENABLED "E in mm3"
#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Fil. Dia. 1"
#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Fil. Dia. 2"
#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Fil. Dia. 3"
#define MSG_FILAMENT_DIAM "Fil. Dia."
#define MSG_CONTRAST "Contraste"
#define MSG_STORE_EPROM "Guardar memoria"
#define MSG_LOAD_EPROM "Cargar memoria"

View file

@ -82,9 +82,7 @@
#define MSG_MOTION "Mugimendua"
#define MSG_VOLUMETRIC "Filament"
#define MSG_VOLUMETRIC_ENABLED "E in mm3"
#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Fil. Dia. 1"
#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Fil. Dia. 2"
#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Fil. Dia. 3"
#define MSG_FILAMENT_DIAM "Fil. Dia."
#define MSG_CONTRAST "LCD kontrastea"
#define MSG_STORE_EPROM "Gorde memoria"
#define MSG_LOAD_EPROM "Kargatu memoria"

View file

@ -82,9 +82,7 @@
#define MSG_MOTION "Liike"
#define MSG_VOLUMETRIC "Filament"
#define MSG_VOLUMETRIC_ENABLED "E in mm³"
#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Fil. Dia. 1"
#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Fil. Dia. 2"
#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Fil. Dia. 3"
#define MSG_FILAMENT_DIAM "Fil. Dia."
#define MSG_CONTRAST "LCD kontrasti"
#define MSG_STORE_EPROM "Tallenna muistiin"
#define MSG_LOAD_EPROM "Lataa muistista"

View file

@ -84,9 +84,7 @@
#define MSG_MOTION "Mouvement"
#define MSG_VOLUMETRIC "Filament"
#define MSG_VOLUMETRIC_ENABLED "E in mm3"
#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Fil. Dia. 1"
#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Fil. Dia. 2"
#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Fil. Dia. 3"
#define MSG_FILAMENT_DIAM "Fil. Dia."
#define MSG_CONTRAST "Contraste LCD"
#define MSG_STORE_EPROM "Sauver config"
#define MSG_LOAD_EPROM "Lire config"

View file

@ -82,10 +82,7 @@
#define MSG_MOTION "Movimento"
#define MSG_VOLUMETRIC "Filament"
#define MSG_VOLUMETRIC_ENABLED "E in mm³"
#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Diam. filo 1"
#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Diam. filo 2"
#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Diam. filo 3"
#define MSG_FILAMENT_SIZE_EXTRUDER_3 "Diam. filo 4"
#define MSG_FILAMENT_DIAM "Diam. filo"
#define MSG_CONTRAST "Contrasto LCD"
#define MSG_STORE_EPROM "Salva in EEPROM"
#define MSG_LOAD_EPROM "Carica da EEPROM"

View file

@ -84,10 +84,7 @@
#define MSG_MOTION "\xb3\xba\xde\xb7\xbe\xaf\xc3\xb2" // "Motion"
#define MSG_VOLUMETRIC "\xcc\xa8\xd7\xd2\xdd\xc4" // "Filament"
#define MSG_VOLUMETRIC_ENABLED "E in mm3"
#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Fil. Dia. 1"
#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Fil. Dia. 2"
#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Fil. Dia. 3"
#define MSG_FILAMENT_SIZE_EXTRUDER_3 "Fil. Dia. 4"
#define MSG_FILAMENT_DIAM "Fil. Dia."
#define MSG_CONTRAST "LCD\xba\xdd\xc4\xd7\xbd\xc4" // "LCD contrast"
#define MSG_STORE_EPROM "\xd2\xd3\xd8\xcd\xb6\xb8\xc9\xb3" // "Store memory"
#define MSG_LOAD_EPROM "\xd2\xd3\xd8\xb6\xd7\xd6\xd0\ba\xd0" // "Load memory"

View file

@ -88,10 +88,7 @@
#define MSG_MOTION "ウゴキセツテイ" // "Motion"
#define MSG_VOLUMETRIC "フィラナント" // "Filament"
#define MSG_VOLUMETRIC_ENABLED "E in mm3"
#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Fil. Dia. 1"
#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Fil. Dia. 2"
#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Fil. Dia. 3"
#define MSG_FILAMENT_SIZE_EXTRUDER_3 "Fil. Dia. 4"
#define MSG_FILAMENT_DIAM "Fil. Dia."
#define MSG_CONTRAST "LCDコントラスト" // "LCD contrast"
#define MSG_STORE_EPROM "ナモリヘセケノウ" // "Store memory"
#define MSG_LOAD_EPROM "ナモリセラヨミbaミ" // "Load memory"

View file

@ -82,9 +82,7 @@
#define MSG_MOTION "Beweging"
#define MSG_VOLUMETRIC "Filament"
#define MSG_VOLUMETRIC_ENABLED "E in mm3"
#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Fil. Dia. 1"
#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Fil. Dia. 2"
#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Fil. Dia. 3"
#define MSG_FILAMENT_DIAM "Fil. Dia."
#define MSG_CONTRAST "LCD contrast"
#define MSG_STORE_EPROM "Geheugen opslaan"
#define MSG_LOAD_EPROM "Geheugen laden"

View file

@ -82,9 +82,7 @@
#define MSG_MOTION "Ruch"
#define MSG_VOLUMETRIC "Filament"
#define MSG_VOLUMETRIC_ENABLED "E in mm3"
#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Fil. Dia. 1"
#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Fil. Dia. 2"
#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Fil. Dia. 3"
#define MSG_FILAMENT_DIAM "Fil. Dia."
#define MSG_CONTRAST "Kontrast LCD"
#define MSG_STORE_EPROM "Zapisz w pamieci"
#define MSG_LOAD_EPROM "Wczytaj z pamieci"

View file

@ -82,9 +82,7 @@
#define MSG_MOTION "Movimento"
#define MSG_VOLUMETRIC "Filament"
#define MSG_VOLUMETRIC_ENABLED "E in mm3"
#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Fil. Dia. 1"
#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Fil. Dia. 2"
#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Fil. Dia. 3"
#define MSG_FILAMENT_DIAM "Fil. Dia."
#define MSG_CONTRAST "Contrast"
#define MSG_STORE_EPROM "Guardar memoria"
#define MSG_LOAD_EPROM "Carregar memoria"

View file

@ -82,9 +82,7 @@
#define MSG_MOTION "Movimento"
#define MSG_VOLUMETRIC "Filamento"
#define MSG_VOLUMETRIC_ENABLED "E in mm3"
#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Fil. Diam. 1"
#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Fil. Diam. 2"
#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Fil. Diam. 3"
#define MSG_FILAMENT_DIAM "Fil. Diam."
#define MSG_CONTRAST "Contraste"
#define MSG_STORE_EPROM "Guardar na memoria"
#define MSG_LOAD_EPROM "Carregar da memoria"

View file

@ -83,9 +83,7 @@
#define MSG_MOTION "Механика"
#define MSG_VOLUMETRIC "Пруток"
#define MSG_VOLUMETRIC_ENABLED "E в mm3"
#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Диаметр прутка 1"
#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Диаметр прутка 2"
#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Диаметр прутка 3"
#define MSG_FILAMENT_DIAM "Диаметр прутка"
#define MSG_CONTRAST "Контраст LCD"
#define MSG_STORE_EPROM "Сохранить в EEPROM"
#define MSG_LOAD_EPROM "Считать из EEPROM"

View file

@ -495,14 +495,19 @@ static void lcd_tune_menu() {
//
// Nozzle:
// Nozzle 1:
// Nozzle 2:
// Nozzle 3:
// Nozzle 4:
//
#if EXTRUDERS == 1
#if TEMP_SENSOR_0 != 0
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE, &target_temperature[0], 0, HEATER_0_MAXTEMP - 15);
#endif
#if EXTRUDERS > 1
#else //EXTRUDERS > 1
#if TEMP_SENSOR_0 != 0
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE MSG_N1, &target_temperature[0], 0, HEATER_0_MAXTEMP - 15);
#endif
#if TEMP_SENSOR_1 != 0
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE MSG_N2, &target_temperature[1], 0, HEATER_1_MAXTEMP - 15);
#endif
@ -536,18 +541,21 @@ static void lcd_tune_menu() {
MENU_ITEM_EDIT(int3, MSG_FLOW, &extruder_multiplier[active_extruder], 10, 999);
//
// Flow 0:
// Flow:
// Flow 1:
// Flow 2:
// Flow 3:
// Flow 4:
//
MENU_ITEM_EDIT(int3, MSG_FLOW MSG_N0, &extruder_multiplier[0], 10, 999);
#if EXTRUDERS > 1
MENU_ITEM_EDIT(int3, MSG_FLOW MSG_N1, &extruder_multiplier[1], 10, 999);
#if EXTRUDERS == 1
MENU_ITEM_EDIT(int3, MSG_FLOW, &extruder_multiplier[0], 10, 999);
#else // EXTRUDERS > 1
MENU_ITEM_EDIT(int3, MSG_FLOW MSG_N1, &extruder_multiplier[0], 10, 999);
MENU_ITEM_EDIT(int3, MSG_FLOW MSG_N2, &extruder_multiplier[1], 10, 999);
#if EXTRUDERS > 2
MENU_ITEM_EDIT(int3, MSG_FLOW MSG_N2, &extruder_multiplier[2], 10, 999);
MENU_ITEM_EDIT(int3, MSG_FLOW MSG_N3, &extruder_multiplier[2], 10, 999);
#if EXTRUDERS > 3
MENU_ITEM_EDIT(int3, MSG_FLOW MSG_N3, &extruder_multiplier[3], 10, 999);
MENU_ITEM_EDIT(int3, MSG_FLOW MSG_N4, &extruder_multiplier[3], 10, 999);
#endif //EXTRUDERS > 3
#endif //EXTRUDERS > 2
#endif //EXTRUDERS > 1
@ -829,12 +837,12 @@ static void lcd_move_e(
pos_label = PSTR(MSG_MOVE_E);
#else
switch (e) {
case 0: pos_label = PSTR(MSG_MOVE_E0); break;
case 1: pos_label = PSTR(MSG_MOVE_E1); break;
case 0: pos_label = PSTR(MSG_MOVE_E MSG_MOVE_E1); break;
case 1: pos_label = PSTR(MSG_MOVE_E MSG_MOVE_E2); break;
#if EXTRUDERS > 2
case 2: pos_label = PSTR(MSG_MOVE_E2); break;
case 2: pos_label = PSTR(MSG_MOVE_E MSG_MOVE_E3); break;
#if EXTRUDERS > 3
case 3: pos_label = PSTR(MSG_MOVE_E3); break;
case 3: pos_label = PSTR(MSG_MOVE_E MSG_MOVE_E4); break;
#endif //EXTRUDERS > 3
#endif //EXTRUDERS > 2
}
@ -874,12 +882,12 @@ static void lcd_move_menu_axis() {
#if EXTRUDERS == 1
MENU_ITEM(submenu, MSG_MOVE_E, lcd_move_e);
#else
MENU_ITEM(submenu, MSG_MOVE_E0, lcd_move_e0);
MENU_ITEM(submenu, MSG_MOVE_E1, lcd_move_e1);
MENU_ITEM(submenu, MSG_MOVE_E MSG_MOVE_E1, lcd_move_e0);
MENU_ITEM(submenu, MSG_MOVE_E MSG_MOVE_E2, lcd_move_e1);
#if EXTRUDERS > 2
MENU_ITEM(submenu, MSG_MOVE_E2, lcd_move_e2);
MENU_ITEM(submenu, MSG_MOVE_E MSG_MOVE_E3, lcd_move_e2);
#if EXTRUDERS > 3
MENU_ITEM(submenu, MSG_MOVE_E3, lcd_move_e3);
MENU_ITEM(submenu, MSG_MOVE_E MSG_MOVE_E4, lcd_move_e3);
#endif
#endif
#endif // EXTRUDERS > 1
@ -962,18 +970,18 @@ static void lcd_control_menu() {
PID_PARAM(Kd, e) = scalePID_d(raw_Kd);
updatePID();
}
void copy_and_scalePID_i_E1() { copy_and_scalePID_i(0); }
void copy_and_scalePID_d_E1() { copy_and_scalePID_d(0); }
#define COPY_AND_SCALE(eindex) \
void copy_and_scalePID_i_E ## eindex() { copy_and_scalePID_i(eindex); } \
void copy_and_scalePID_d_E ## eindex() { copy_and_scalePID_d(eindex); }
COPY_AND_SCALE(0);
#if ENABLED(PID_PARAMS_PER_EXTRUDER)
#if EXTRUDERS > 1
void copy_and_scalePID_i_E2() { copy_and_scalePID_i(1); }
void copy_and_scalePID_d_E2() { copy_and_scalePID_d(1); }
COPY_AND_SCALE(1);
#if EXTRUDERS > 2
void copy_and_scalePID_i_E3() { copy_and_scalePID_i(2); }
void copy_and_scalePID_d_E3() { copy_and_scalePID_d(2); }
COPY_AND_SCALE(2);
#if EXTRUDERS > 3
void copy_and_scalePID_i_E4() { copy_and_scalePID_i(3); }
void copy_and_scalePID_d_E4() { copy_and_scalePID_d(3); }
COPY_AND_SCALE(3);
#endif //EXTRUDERS > 3
#endif //EXTRUDERS > 2
#endif //EXTRUDERS > 1
@ -995,12 +1003,17 @@ static void lcd_control_temperature_menu() {
MENU_ITEM(back, MSG_CONTROL, lcd_control_menu);
//
// Nozzle, Nozzle 2, Nozzle 3, Nozzle 4
// Nozzle
// Nozzle 1, Nozzle 2, Nozzle 3, Nozzle 4
//
#if EXTRUDERS == 1
#if TEMP_SENSOR_0 != 0
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE, &target_temperature[0], 0, HEATER_0_MAXTEMP - 15);
#endif
#if EXTRUDERS > 1
#else //EXTRUDERS > 1
#if TEMP_SENSOR_0 != 0
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE MSG_N1, &target_temperature[0], 0, HEATER_0_MAXTEMP - 15);
#endif
#if TEMP_SENSOR_1 != 0
MENU_MULTIPLIER_ITEM_EDIT(int3, MSG_NOZZLE MSG_N2, &target_temperature[1], 0, HEATER_1_MAXTEMP - 15);
#endif
@ -1040,59 +1053,42 @@ static void lcd_control_temperature_menu() {
//
// PID-P, PID-I, PID-D, PID-C
// PID-P E1, PID-I E1, PID-D E1, PID-C E1
// PID-P E2, PID-I E2, PID-D E2, PID-C E2
// PID-P E3, PID-I E3, PID-D E3, PID-C E3
// PID-P E4, PID-I E4, PID-D E4, PID-C E4
//
#if ENABLED(PIDTEMP)
// set up temp variables - undo the default scaling
raw_Ki = unscalePID_i(PID_PARAM(Ki,0));
raw_Kd = unscalePID_d(PID_PARAM(Kd,0));
MENU_ITEM_EDIT(float52, MSG_PID_P, &PID_PARAM(Kp,0), 1, 9990);
// i is typically a small value so allows values below 1
MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_I, &raw_Ki, 0.01, 9990, copy_and_scalePID_i_E1);
MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_D, &raw_Kd, 1, 9990, copy_and_scalePID_d_E1);
#if ENABLED(PID_ADD_EXTRUSION_RATE)
MENU_ITEM_EDIT(float3, MSG_PID_C, &PID_PARAM(Kc,0), 1, 9990);
#endif//PID_ADD_EXTRUSION_RATE
#if ENABLED(PID_PARAMS_PER_EXTRUDER)
#if EXTRUDERS > 1
// set up temp variables - undo the default scaling
raw_Ki = unscalePID_i(PID_PARAM(Ki,1));
raw_Kd = unscalePID_d(PID_PARAM(Kd,1));
MENU_ITEM_EDIT(float52, MSG_PID_P MSG_E2, &PID_PARAM(Kp,1), 1, 9990);
// i is typically a small value so allows values below 1
MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_I MSG_E2, &raw_Ki, 0.01, 9990, copy_and_scalePID_i_E2);
MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_D MSG_E2, &raw_Kd, 1, 9990, copy_and_scalePID_d_E2);
#if ENABLED(PID_ADD_EXTRUSION_RATE)
MENU_ITEM_EDIT(float3, MSG_PID_C MSG_E2, &PID_PARAM(Kc,1), 1, 9990);
#endif//PID_ADD_EXTRUSION_RATE
#define _PID_MENU_ITEMS(ELABEL, eindex) \
raw_Ki = unscalePID_i(PID_PARAM(Ki, eindex)); \
raw_Kd = unscalePID_d(PID_PARAM(Kd, eindex)); \
MENU_ITEM_EDIT(float52, MSG_PID_P ELABEL, &PID_PARAM(Kp, eindex), 1, 9990); \
MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_I ELABEL, &raw_Ki, 0.01, 9990, copy_and_scalePID_i_E ## eindex); \
MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_D ELABEL, &raw_Kd, 1, 9990, copy_and_scalePID_d_E ## eindex)
#if ENABLED(PID_ADD_EXTRUSION_RATE)
#define PID_MENU_ITEMS(ELABEL, eindex) \
_PID_MENU_ITEMS(ELABEL, eindex); \
MENU_ITEM_EDIT(float3, MSG_PID_C ELABEL, &PID_PARAM(Kc, eindex), 1, 9990)
#else
#define PID_MENU_ITEMS(ELABEL, eindex) _PID_MENU_ITEMS(ELABEL, eindex)
#endif
#if ENABLED(PID_PARAMS_PER_EXTRUDER) && EXTRUDERS > 1
PID_MENU_ITEMS(MSG_E1, 0);
PID_MENU_ITEMS(MSG_E2, 1);
#if EXTRUDERS > 2
// set up temp variables - undo the default scaling
raw_Ki = unscalePID_i(PID_PARAM(Ki,2));
raw_Kd = unscalePID_d(PID_PARAM(Kd,2));
MENU_ITEM_EDIT(float52, MSG_PID_P MSG_E3, &PID_PARAM(Kp,2), 1, 9990);
// i is typically a small value so allows values below 1
MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_I MSG_E3, &raw_Ki, 0.01, 9990, copy_and_scalePID_i_E3);
MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_D MSG_E3, &raw_Kd, 1, 9990, copy_and_scalePID_d_E3);
#if ENABLED(PID_ADD_EXTRUSION_RATE)
MENU_ITEM_EDIT(float3, MSG_PID_C MSG_E3, &PID_PARAM(Kc,2), 1, 9990);
#endif//PID_ADD_EXTRUSION_RATE
PID_MENU_ITEMS(MSG_E3, 2);
#if EXTRUDERS > 3
// set up temp variables - undo the default scaling
raw_Ki = unscalePID_i(PID_PARAM(Ki,3));
raw_Kd = unscalePID_d(PID_PARAM(Kd,3));
MENU_ITEM_EDIT(float52, MSG_PID_P MSG_E4, &PID_PARAM(Kp,3), 1, 9990);
// i is typically a small value so allows values below 1
MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_I MSG_E4, &raw_Ki, 0.01, 9990, copy_and_scalePID_i_E4);
MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_D MSG_E4, &raw_Kd, 1, 9990, copy_and_scalePID_d_E4);
#if ENABLED(PID_ADD_EXTRUSION_RATE)
MENU_ITEM_EDIT(float3, MSG_PID_C MSG_E4, &PID_PARAM(Kc,3), 1, 9990);
#endif//PID_ADD_EXTRUSION_RATE
#endif//EXTRUDERS > 3
#endif//EXTRUDERS > 2
#endif//EXTRUDERS > 1
#endif //PID_PARAMS_PER_EXTRUDER
#endif//PIDTEMP
PID_MENU_ITEMS(MSG_E4, 3);
#endif //EXTRUDERS > 3
#endif //EXTRUDERS > 2
#else //!PID_PARAMS_PER_EXTRUDER || EXTRUDERS == 1
PID_MENU_ITEMS("", 0);
#endif //!PID_PARAMS_PER_EXTRUDER || EXTRUDERS == 1
#endif //PIDTEMP
//
// Preheat PLA conf
@ -1201,13 +1197,15 @@ static void lcd_control_volumetric_menu() {
MENU_ITEM_EDIT_CALLBACK(bool, MSG_VOLUMETRIC_ENABLED, &volumetric_enabled, calculate_volumetric_multipliers);
if (volumetric_enabled) {
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER_0, &filament_size[0], 1.5, 3.25, calculate_volumetric_multipliers);
#if EXTRUDERS > 1
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER_1, &filament_size[1], 1.5, 3.25, calculate_volumetric_multipliers);
#if EXTRUDERS == 1
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_DIAM, &filament_size[0], 1.5, 3.25, calculate_volumetric_multipliers);
#else //EXTRUDERS > 1
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_DIAM MSG_DIAM_E1, &filament_size[0], 1.5, 3.25, calculate_volumetric_multipliers);
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_DIAM MSG_DIAM_E2, &filament_size[1], 1.5, 3.25, calculate_volumetric_multipliers);
#if EXTRUDERS > 2
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER_2, &filament_size[2], 1.5, 3.25, calculate_volumetric_multipliers);
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_DIAM MSG_DIAM_E3, &filament_size[2], 1.5, 3.25, calculate_volumetric_multipliers);
#if EXTRUDERS > 3
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER_3, &filament_size[3], 1.5, 3.25, calculate_volumetric_multipliers);
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_DIAM MSG_DIAM_E4, &filament_size[3], 1.5, 3.25, calculate_volumetric_multipliers);
#endif //EXTRUDERS > 3
#endif //EXTRUDERS > 2
#endif //EXTRUDERS > 1