From 7b70caab7c4bdc45490d83730b62c5c2ea31e98e Mon Sep 17 00:00:00 2001 From: Bernhard Kubicek Date: Mon, 7 Nov 2011 22:33:13 +0100 Subject: [PATCH] made progmem mainly, found one bug in cardreader, added a empty class for cardreader in case no sd support. --- Marlin/EEPROMwrite.h | 79 ++- Marlin/Marlin.h | 6 +- Marlin/Marlin.pde | 147 +++-- Marlin/cardreader.h | 31 +- Marlin/cardreader.pde | 23 +- Marlin/pins.h | 1386 ++++++++++++++++++++--------------------- Marlin/ultralcd.pde | 123 ++-- 7 files changed, 944 insertions(+), 851 deletions(-) diff --git a/Marlin/EEPROMwrite.h b/Marlin/EEPROMwrite.h index db9f2fde1..ae31bc9ec 100644 --- a/Marlin/EEPROMwrite.h +++ b/Marlin/EEPROMwrite.h @@ -25,6 +25,19 @@ template int EEPROM_readAnything(int &ee, T& value) } //====================================================================================== +#include + +void serialprintPGM(const char *str) +{ + char ch=pgm_read_byte(str); + while(ch) + { + Serial.print(ch); + ch=pgm_read_byte(++str); + } +} +#define SerialprintPGM(x) serialprintPGM(PSTR(x)) + #define EEPROM_OFFSET 100 @@ -62,7 +75,7 @@ void StoreSettings() char ver2[4]=EEPROM_VERSION; i=EEPROM_OFFSET; EEPROM_writeAnything(i,ver2); // validate data - SERIAL_ECHOLN("Settings Stored"); + SerialprintPGM("echo: Settings Stored\n"); } void RetrieveSettings(bool def=false) @@ -91,7 +104,7 @@ void RetrieveSettings(bool def=false) EEPROM_readAnything(i,Ki); EEPROM_readAnything(i,Kd); - SERIAL_ECHOLN("Stored settings retreived:"); + SerialprintPGM("echo: Stored settings retreived:\n"); } else { @@ -111,21 +124,57 @@ void RetrieveSettings(bool def=false) mintravelfeedrate=DEFAULT_MINTRAVELFEEDRATE; max_xy_jerk=DEFAULT_XYJERK; max_z_jerk=DEFAULT_ZJERK; - SERIAL_ECHOLN("Using Default settings:"); + SerialprintPGM("echo: Using Default settings:\n"); } - SERIAL_ECHOLN("Steps per unit:"); - SERIAL_ECHOLN(" M92 X" <<_FLOAT(axis_steps_per_unit[0],3) << " Y" << _FLOAT(axis_steps_per_unit[1],3) << " Z" << _FLOAT(axis_steps_per_unit[2],3) << " E" << _FLOAT(axis_steps_per_unit[3],3)); - SERIAL_ECHOLN("Maximum feedrates (mm/s):"); - SERIAL_ECHOLN(" M203 X" <<_FLOAT(max_feedrate[0]/60,2)<<" Y" << _FLOAT(max_feedrate[1]/60,2) << " Z" << _FLOAT(max_feedrate[2]/60,2) << " E" << _FLOAT(max_feedrate[3]/60,2)); - SERIAL_ECHOLN("Maximum Acceleration (mm/s2):"); - SERIAL_ECHOLN(" M201 X" <<_FLOAT(max_acceleration_units_per_sq_second[0],0) << " Y" << _FLOAT(max_acceleration_units_per_sq_second[1],0) << " Z" << _FLOAT(max_acceleration_units_per_sq_second[2],0) << " E" << _FLOAT(max_acceleration_units_per_sq_second[3],0)); - SERIAL_ECHOLN("Acceleration: S=acceleration, T=retract acceleration"); - SERIAL_ECHOLN(" M204 S" <<_FLOAT(acceleration,2) << " T" << _FLOAT(retract_acceleration,2)); - SERIAL_ECHOLN("Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum xY jerk (mm/s), Z=maximum Z jerk (mm/s)"); - SERIAL_ECHOLN(" M205 S" <<_FLOAT(minimumfeedrate/60,2) << " T" << _FLOAT(mintravelfeedrate/60,2) << " B" << _FLOAT(minsegmenttime,2) << " X" << _FLOAT(max_xy_jerk/60,2) << " Z" << _FLOAT(max_z_jerk/60,2)); + SerialprintPGM("echo: Steps per unit:\n M92 X"); + Serial.print(axis_steps_per_unit[0]); + SerialprintPGM(" Y"); + Serial.print(axis_steps_per_unit[1]); + SerialprintPGM(" Z"); + Serial.print(axis_steps_per_unit[2]); + SerialprintPGM(" E"); + Serial.print(axis_steps_per_unit[3]); + + SerialprintPGM("\nMaximum feedrates (mm/s):\n M203 X" ); + Serial.print(max_feedrate[0]/60); + SerialprintPGM(" Y" ); + Serial.print(max_feedrate[1]/60 ); + SerialprintPGM(" Z" ); + Serial.print(max_feedrate[2]/60 ); + SerialprintPGM(" E" ); + Serial.print(max_feedrate[3]/60); + SerialprintPGM("\nMaximum Acceleration (mm/s2):\n M201 X" ); + Serial.print(max_acceleration_units_per_sq_second[0] ); + SerialprintPGM(" Y" ); + Serial.print(max_acceleration_units_per_sq_second[1] ); + SerialprintPGM(" Z" ); + Serial.print(max_acceleration_units_per_sq_second[2] ); + SerialprintPGM(" E" ); + Serial.print(max_acceleration_units_per_sq_second[3]); + SerialprintPGM("\necho: Acceleration: S=acceleration, T=retract acceleration\n M204 S" ); + Serial.print(acceleration ); + SerialprintPGM(" T" ); + Serial.print(retract_acceleration); + SerialprintPGM("\necho: Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum xY jerk (mm/s), Z=maximum Z jerk (mm/s)"); + SerialprintPGM(" M205 S" ); + Serial.print(minimumfeedrate/60 ); + SerialprintPGM(" T" ); + Serial.print(mintravelfeedrate/60 ); + SerialprintPGM(" B" ); + Serial.print(minsegmenttime ); + SerialprintPGM(" X" ); + Serial.print(max_xy_jerk/60 ); + SerialprintPGM(" Z" ); + Serial.print(max_z_jerk/60); + SerialprintPGM("\n" ); #ifdef PIDTEMP - SERIAL_ECHOLN("PID settings:"); - SERIAL_ECHOLN(" M301 P" << _FLOAT(Kp,3) << " I" << _FLOAT(Ki,3) << " D" << _FLOAT(Kd,3)); + SerialprintPGM("PID settings:"); + SerialprintPGM(" M301 P" ); + Serial.print(Kp ); + SerialprintPGM(" I" ); + Serial.print(Ki ); + SerialprintPGM(" D" ); + Serial.print(Kd); #endif } diff --git a/Marlin/Marlin.h b/Marlin/Marlin.h index 21eadeeb5..61b56fb97 100644 --- a/Marlin/Marlin.h +++ b/Marlin/Marlin.h @@ -9,8 +9,10 @@ #include "streaming.h" #define SERIAL_ECHO(x) Serial << "echo: " << x; #define SERIAL_ECHOLN(x) Serial << "echo: "< -1) || defined (HEATER_USES_AD595) tt = degHotend0(); #endif @@ -620,21 +637,21 @@ inline void process_commands() bt = degBed(); #endif #if (TEMP_0_PIN > -1) || defined (HEATER_USES_AD595) - Serial.print("ok T:"); - Serial.print(tt); + SERIAL_PROTOCOL("ok T:"); + SERIAL_PROTOCOL(tt); #if TEMP_1_PIN > -1 #ifdef PIDTEMP - Serial.print(" B:"); + SERIAL_PROTOCOL(" B:"); #if TEMP_1_PIN > -1 - Serial.println(bt); + SERIAL_PROTOCOLLN(bt); #else - Serial.println(HeaterPower); + SERIAL_PROTOCOLLN(HeaterPower); #endif #else //not PIDTEMP - Serial.println(); + SERIAL_PROTOCOLLN(""); #endif //PIDTEMP #else - Serial.println(); + SERIAL_PROTOCOLLN(""); #endif //TEMP_1_PIN #else SERIAL_ERRORLN("No thermistors - no temp"); @@ -664,8 +681,7 @@ inline void process_commands() #endif //TEMP_RESIDENCY_TIME if( (millis() - codenum) > 1000 ) { //Print Temp Reading every 1 second while heating up/cooling down - Serial.print("T:"); - Serial.println( degHotend0() ); + SERIAL_PROTOCOLLN("T:"<< degHotend0() ); codenum = millis(); } manage_heater(); @@ -694,12 +710,8 @@ inline void process_commands() if( (millis()-codenum) > 1000 ) //Print Temp Reading every 1 second while heating up. { float tt=degHotend0(); - Serial.print("T:"); - Serial.println( tt ); - Serial.print("ok T:"); - Serial.print( tt ); - Serial.print(" B:"); - Serial.println( degBed() ); + SERIAL_PROTOCOLLN("T:"< -1) - Serial.print("x_min:"); - Serial.print((READ(X_MIN_PIN)^ENDSTOPS_INVERTING)?"H ":"L "); + SERIAL_PROTOCOL("x_min:"); + SERIAL_PROTOCOL(((READ(X_MIN_PIN)^ENDSTOPS_INVERTING)?"H ":"L ")); #endif #if (X_MAX_PIN > -1) - Serial.print("x_max:"); - Serial.print((READ(X_MAX_PIN)^ENDSTOPS_INVERTING)?"H ":"L "); + SERIAL_PROTOCOL("x_max:"); + SERIAL_PROTOCOL(((READ(X_MAX_PIN)^ENDSTOPS_INVERTING)?"H ":"L ")); #endif #if (Y_MIN_PIN > -1) - Serial.print("y_min:"); - Serial.print((READ(Y_MIN_PIN)^ENDSTOPS_INVERTING)?"H ":"L "); + SERIAL_PROTOCOL("y_min:"); + SERIAL_PROTOCOL(((READ(Y_MIN_PIN)^ENDSTOPS_INVERTING)?"H ":"L ")); #endif #if (Y_MAX_PIN > -1) - Serial.print("y_max:"); - Serial.print((READ(Y_MAX_PIN)^ENDSTOPS_INVERTING)?"H ":"L "); + SERIAL_PROTOCOL("y_max:"); + SERIAL_PROTOCOL(((READ(Y_MAX_PIN)^ENDSTOPS_INVERTING)?"H ":"L ")); #endif #if (Z_MIN_PIN > -1) - Serial.print("z_min:"); - Serial.print((READ(Z_MIN_PIN)^ENDSTOPS_INVERTING)?"H ":"L "); + SERIAL_PROTOCOL("z_min:"); + SERIAL_PROTOCOL(((READ(Z_MIN_PIN)^ENDSTOPS_INVERTING)?"H ":"L ")); #endif #if (Z_MAX_PIN > -1) - Serial.print("z_max:"); - Serial.print((READ(Z_MAX_PIN)^ENDSTOPS_INVERTING)?"H ":"L "); + SERIAL_PROTOCOL("z_max:"); + SERIAL_PROTOCOL(((READ(Z_MAX_PIN)^ENDSTOPS_INVERTING)?"H ":"L ")); #endif - Serial.println(""); + SERIAL_PROTOCOLLN(""); break; //TODO: update for all axis, use for loop case 201: // M201 @@ -885,9 +897,7 @@ inline void process_commands() } else { - Serial.print("echo: Unknown command:\""); - Serial.print(cmdbuffer[bufindr]); - Serial.println("\""); + SERIAL_ECHOLN("Unknown command:\""<=filesize ;}; - inline char get() { int16_t n = file.read(); return (n!=-1)?(char)n:'\n';}; + inline char get() { int16_t n = file.read(); return (n==-1)?'\n':(char)n;}; inline void setIndex(long index) {sdpos = index;file.seekSet(index);}; public: @@ -52,6 +52,35 @@ private: bool autostart_stilltocheck; //the sd start is delayed, because otherwise the serial cannot answer fast enought to make contact with the hostsoftware. }; + +#else +class CardReader +{ +public: + inline CardReader(){}; + + inline static void initsd(){}; + inline static void write_command(char *buf){}; + + inline static void checkautostart(bool x) {}; + + inline static void closefile() {}; + inline static void release(){}; + inline static void startFileprint(){}; + inline static void startFilewrite(char *name){}; + inline static void pauseSDPrint(){}; + inline static void getStatus(){}; + + inline static void selectFile(char* name){}; + inline static void getfilename(const uint8_t nr){}; + inline static uint8_t getnrfilenames(){return 0;}; + + + inline static void ls() {}; + inline static bool eof() {return true;}; + inline static char get() {return 0;}; + inline static void setIndex(){}; +}; #endif //SDSUPPORT diff --git a/Marlin/cardreader.pde b/Marlin/cardreader.pde index a49b9999f..cd4bfeb7a 100644 --- a/Marlin/cardreader.pde +++ b/Marlin/cardreader.pde @@ -76,17 +76,14 @@ void CardReader::selectFile(char* name) file.close(); if (file.open(&root, name, O_READ)) { - Serial.print("File opened:"); - Serial.print(name); - Serial.print(" Size:"); filesize = file.fileSize(); - Serial.println(filesize); + SERIAL_PROTOCOLLN("File opened:"< Boards' menu. -#endif - -#define X_STEP_PIN 15 -#define X_DIR_PIN 18 -#define X_ENABLE_PIN 19 -#define X_MIN_PIN 20 -#define X_MAX_PIN 21 - -#define Y_STEP_PIN 23 -#define Y_DIR_PIN 22 -#define Y_ENABLE_PIN 19 -#define Y_MIN_PIN 25 -#define Y_MAX_PIN 26 - -#define Z_STEP_PIN 29 -#define Z_DIR_PIN 30 -#define Z_ENABLE_PIN 31 -#define Z_MIN_PIN 2 -#define Z_MAX_PIN 1 - -#define E_STEP_PIN 12 -#define E_DIR_PIN 16 -#define E_ENABLE_PIN 3 - -#define SDPOWER -1 -#define SDSS -1 -#define LED_PIN 0 -#define FAN_PIN -1 -#define PS_ON_PIN -1 -#define KILL_PIN -1 - -#define HEATER_0_PIN 14 -#define TEMP_0_PIN 4 //D27 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! -#define HEATER_1_PIN -1 -#define HEATER_2_PIN -1 -/* Unused (1) (2) (3) 4 5 6 7 8 9 10 11 12 13 (14) (15) (16) 17 (18) (19) (20) (21) (22) (23) 24 (25) (26) (27) 28 (29) (30) (31) */ - - - -#endif - - -/**************************************************************************************** -* RepRap Motherboard ****---NOOOOOO RS485/EXTRUDER CONTROLLER!!!!!!!!!!!!!!!!!---******* -* -****************************************************************************************/ -#if MOTHERBOARD == 2 -#define KNOWN_BOARD 1 - -#ifndef __AVR_ATmega644P__ -#error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu. -#endif - -#define X_STEP_PIN 15 -#define X_DIR_PIN 18 -#define X_ENABLE_PIN 19 -#define X_MIN_PIN 20 -#define X_MAX_PIN 21 - -#define Y_STEP_PIN 23 -#define Y_DIR_PIN 22 -#define Y_ENABLE_PIN 24 -#define Y_MIN_PIN 25 -#define Y_MAX_PIN 26 - -#define Z_STEP_PINN 27 -#define Z_DIR_PINN 28 -#define Z_ENABLE_PIN 29 -#define Z_MIN_PIN 30 -#define Z_MAX_PIN 31 - -#define E_STEP_PIN 17 -#define E_DIR_PIN 16 -#define E_ENABLE_PIN -1 - -#define SDPOWER -1 -#define SDSS 4 -#define LED_PIN 0 - -#define SD_CARD_WRITE 2 -#define SD_CARD_DETECT 3 -#define SD_CARD_SELECT 4 - -//our RS485 pins -#define TX_ENABLE_PIN 12 -#define RX_ENABLE_PIN 13 - -//pin for controlling the PSU. -#define PS_ON_PIN 14 - -#define FAN_PIN -1 -#define KILL_PIN -1 - -#define HEATER_0_PIN -1 -#define TEMP_0_PIN -1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! -#define HEATER_1_PIN -1 -#define HEATER_2_PIN -1 - - - -#endif - -/**************************************************************************************** -* Arduino Mega pin assignment -* -****************************************************************************************/ -#if MOTHERBOARD == 33 -#define MOTHERBOARD 3 -#define RAMPS_V_1_3 -#endif -#if MOTHERBOARD == 3 -#define KNOWN_BOARD 1 - -//////////////////FIX THIS////////////// -#ifndef __AVR_ATmega1280__ - #ifndef __AVR_ATmega2560__ - #error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu. - #endif -#endif - -// uncomment one of the following lines for RAMPS v1.3 or v1.0, comment both for v1.2 or 1.1 -// #define RAMPS_V_1_3 -// #define RAMPS_V_1_0 - -#ifdef RAMPS_V_1_3 - -#define X_STEP_PIN 54 -#define X_DIR_PIN 55 -#define X_ENABLE_PIN 38 -#define X_MIN_PIN 3 -#define X_MAX_PIN -1 //2 //Max endstops default to disabled "-1", set to commented value to enable. - -#define Y_STEP_PIN 60 -#define Y_DIR_PIN 61 -#define Y_ENABLE_PIN 56 -#define Y_MIN_PIN 14 -#define Y_MAX_PIN -1 //15 - -#define Z_STEP_PIN 46 -#define Z_DIR_PIN 48 -#define Z_ENABLE_PIN 62 -#define Z_MIN_PIN 18 -#define Z_MAX_PIN -1 //19 - -#define E_STEP_PIN 26 -#define E_DIR_PIN 28 -#define E_ENABLE_PIN 24 - -#define SDPOWER -1 -#define SDSS 53 -#define LED_PIN 13 -#define FAN_PIN 9 -#define PS_ON_PIN 12 -#define KILL_PIN -1 - -#define HEATER_0_PIN 10 -#define HEATER_1_PIN 8 -#define HEATER_2_PIN -1 -#define TEMP_0_PIN 13 // ANALOG NUMBERING -#define TEMP_1_PIN 14 // ANALOG NUMBERING -#define TEMP_2_PIN -1 // ANALOG NUMBERING - - -#else // RAMPS_V_1_1 or RAMPS_V_1_2 as default - -#define X_STEP_PIN 26 -#define X_DIR_PIN 28 -#define X_ENABLE_PIN 24 -#define X_MIN_PIN 3 -#define X_MAX_PIN -1 //2 - -#define Y_STEP_PIN 38 -#define Y_DIR_PIN 40 -#define Y_ENABLE_PIN 36 -#define Y_MIN_PIN 16 -#define Y_MAX_PIN -1 //17 - -#define Z_STEP_PIN 44 -#define Z_DIR_PIN 46 -#define Z_ENABLE_PIN 42 -#define Z_MIN_PIN 18 -#define Z_MAX_PIN -1 //19 - -#define E_STEP_PIN 32 -#define E_DIR_PIN 34 -#define E_ENABLE_PIN 30 - -#define SDPOWER 48 -#define SDSS 53 -#define LED_PIN 13 -#define PS_ON_PIN -1 -#define KILL_PIN -1 - - - -#ifdef RAMPS_V_1_0 // RAMPS_V_1_0 - #define HEATER_0_PIN 12 // RAMPS 1.0 - #define HEATER_1_PIN -1 // RAMPS 1.0 - #define FAN_PIN 11 // RAMPS 1.0 - -#else // RAMPS_V_1_1 or RAMPS_V_1_2 - #define HEATER_0_PIN 10 // RAMPS 1.1 - #define HEATER_1_PIN 8 // RAMPS 1.1 - #define FAN_PIN 9 // RAMPS 1.1 -#endif -#define HEATER_2_PIN -1 -#define TEMP_0_PIN 2 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! -#define TEMP_1_PIN 1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! -#define TEMP_2_PIN -1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! -#endif - -// SPI for Max6675 Thermocouple - -#ifndef SDSUPPORT -// these pins are defined in the SD library if building with SD support #define SCK_PIN 52 - #define MISO_PIN 50 - #define MOSI_PIN 51 - #define MAX6675_SS 53 -#else - #define MAX6675_SS 49 -#endif - - -#endif -/**************************************************************************************** -* Duemilanove w/ ATMega328P pin assignment -* -****************************************************************************************/ -#if MOTHERBOARD == 4 -#define KNOWN_BOARD 1 - -#ifndef __AVR_ATmega328P__ -#error Oops! Make sure you have 'Arduino Duemilanove w/ ATMega328' selected from the 'Tools -> Boards' menu. -#endif - -#define X_STEP_PIN 19 -#define X_DIR_PIN 18 -#define X_ENABLE_PIN -1 -#define X_MIN_PIN 17 -#define X_MAX_PIN -1 - -#define Y_STEP_PIN 10 -#define Y_DIR_PIN 7 -#define Y_ENABLE_PIN -1 -#define Y_MIN_PIN 8 -#define Y_MAX_PIN -1 - -#define Z_STEP_PIN 13 -#define Z_DIR_PIN 3 -#define Z_ENABLE_PIN 2 -#define Z_MIN_PIN 4 -#define Z_MAX_PIN -1 - -#define E_STEP_PIN 11 -#define E_DIR_PIN 12 -#define E_ENABLE_PIN -1 - -#define SDPOWER -1 -#define SDSS -1 -#define LED_PIN -1 -#define FAN_PIN 5 -#define PS_ON_PIN -1 -#define KILL_PIN -1 - -#define HEATER_0_PIN 6 -#define TEMP_0_PIN 0 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! -#define HEATER_1_PIN -1 -#define HEATER_2_PIN -1 - -#endif - -/**************************************************************************************** -* Gen6 pin assignment -* -****************************************************************************************/ -#if MOTHERBOARD == 5 -#define KNOWN_BOARD 1 - -#ifndef __AVR_ATmega644P__ - #error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu. -#endif - -//x axis pins - #define X_STEP_PIN 15 - #define X_DIR_PIN 18 - #define X_ENABLE_PIN 19 - #define X_MIN_PIN 20 - #define X_MAX_PIN -1 - - //y axis pins - #define Y_STEP_PIN 23 - #define Y_DIR_PIN 22 - #define Y_ENABLE_PIN 24 - #define Y_MIN_PIN 25 - #define Y_MAX_PIN -1 - - //z axis pins - #define Z_STEP_PIN 27 - #define Z_DIR_PIN 28 - #define Z_ENABLE_PIN 29 - #define Z_MIN_PIN 30 - #define Z_MAX_PIN -1 - - //extruder pins - #define E_STEP_PIN 4 //Edited @ EJE Electronics 20100715 - #define E_DIR_PIN 2 //Edited @ EJE Electronics 20100715 - #define E_ENABLE_PIN 3 //Added @ EJE Electronics 20100715 - #define TEMP_0_PIN 5 //changed @ rkoeppl 20110410 - #define HEATER_0_PIN 14 //changed @ rkoeppl 20110410 - #define HEATER_1_PIN -1 //changed @ rkoeppl 20110410 - #define HEATER_2_PIN -1 - - #define SDPOWER -1 - #define SDSS 17 - #define LED_PIN -1 //changed @ rkoeppl 20110410 - #define TEMP_1_PIN -1 //changed @ rkoeppl 20110410 - #define TEMP_2_PIN -1 - #define FAN_PIN -1 //changed @ rkoeppl 20110410 - #define PS_ON_PIN -1 //changed @ rkoeppl 20110410 - //our pin for debugging. - - #define DEBUG_PIN 0 - - //our RS485 pins - #define TX_ENABLE_PIN 12 - #define RX_ENABLE_PIN 13 - -#endif - -/**************************************************************************************** -* Sanguinololu pin assignment -* -****************************************************************************************/ -#if MOTHERBOARD == 62 -#define MOTHERBOARD 6 -#define SANGUINOLOLU_V_1_2 -#endif -#if MOTHERBOARD == 6 -#define KNOWN_BOARD 1 -#ifndef __AVR_ATmega644P__ -#error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu. -#endif - -#define X_STEP_PIN 15 -#define X_DIR_PIN 21 -#define X_MIN_PIN 18 -#define X_MAX_PIN -2 - -#define Y_STEP_PIN 22 -#define Y_DIR_PIN 23 -#define Y_MIN_PIN 19 -#define Y_MAX_PIN -1 - -#define Z_STEP_PIN 3 -#define Z_DIR_PIN 2 -#define Z_MIN_PIN 20 -#define Z_MAX_PIN -1 - -#define E_STEP_PIN 1 -#define E_DIR_PIN 0 - -#define LED_PIN -1 - -#define FAN_PIN -1 - -#define PS_ON_PIN -1 -#define KILL_PIN -1 - -#define HEATER_0_PIN 13 // (extruder) - -#ifdef SANGUINOLOLU_V_1_2 - -#define HEATER_1_PIN 12 // (bed) -#define X_ENABLE_PIN 14 -#define Y_ENABLE_PIN 14 -#define Z_ENABLE_PIN 26 -#define E_ENABLE_PIN 14 - -#else - -#define HEATER_1_PIN 14 // (bed) -#define X_ENABLE_PIN -1 -#define Y_ENABLE_PIN -1 -#define Z_ENABLE_PIN -1 -#define E_ENABLE_PIN -1 - -#endif - -#define TEMP_0_PIN 7 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 33 extruder) -#define TEMP_1_PIN 6 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 34 bed) -#define TEMP_2_PIN -1 -#define SDPOWER -1 -#define SDSS 31 -#define HEATER_2_PIN -1 - -#endif - - -#if MOTHERBOARD == 7 -#define KNOWN_BOARD -/***************************************************************** -* Ultimaker pin assignment -******************************************************************/ - -#ifndef __AVR_ATmega1280__ - #ifndef __AVR_ATmega2560__ - #error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu. - #endif -#endif - -#define X_STEP_PIN 25 -#define X_DIR_PIN 23 -#define X_MIN_PIN 22 -#define X_MAX_PIN 24 -#define X_ENABLE_PIN 27 - -#define Y_STEP_PIN 31 -#define Y_DIR_PIN 33 -#define Y_MIN_PIN 26 -#define Y_MAX_PIN 28 -#define Y_ENABLE_PIN 29 - -#define Z_STEP_PIN 37 -#define Z_DIR_PIN 39 -#define Z_MIN_PIN 30 -#define Z_MAX_PIN 32 -#define Z_ENABLE_PIN 35 - -#define HEATER_1_PIN 4 -#define TEMP_1_PIN 11 - -#define EXTRUDER_0_STEP_PIN 43 -#define EXTRUDER_0_DIR_PIN 45 -#define EXTRUDER_0_ENABLE_PIN 41 -#define HEATER_0_PIN 2 -#define TEMP_0_PIN 8 - -#define EXTRUDER_1_STEP_PIN 49 -#define EXTRUDER_1_DIR_PIN 47 -#define EXTRUDER_1_ENABLE_PIN 51 -#define EXTRUDER_1_HEATER_PIN 3 -#define EXTRUDER_1_TEMPERATURE_PIN 10 -#define HEATER_2_PIN 51 -#define TEMP_2_PIN 3 - - - -#define E_STEP_PIN EXTRUDER_0_STEP_PIN -#define E_DIR_PIN EXTRUDER_0_DIR_PIN -#define E_ENABLE_PIN EXTRUDER_0_ENABLE_PIN - -#define SDPOWER -1 -#define SDSS 53 -#define LED_PIN 13 -#define FAN_PIN 7 -#define PS_ON_PIN 12 -#define KILL_PIN -1 - -#ifdef ULTRA_LCD - - #ifdef NEWPANEL - //arduino pin witch triggers an piezzo beeper - #define BEEPER 18 - - #define LCD_PINS_RS 20 - #define LCD_PINS_ENABLE 17 - #define LCD_PINS_D4 16 - #define LCD_PINS_D5 21 - #define LCD_PINS_D6 5 - #define LCD_PINS_D7 6 - - //buttons are directly attached - #define BTN_EN1 40 - #define BTN_EN2 42 - #define BTN_ENC 19 //the click - - #define BLEN_C 2 - #define BLEN_B 1 - #define BLEN_A 0 - - #define SDCARDDETECT 38 - - //encoder rotation values - #define encrot0 0 - #define encrot1 2 - #define encrot2 3 - #define encrot3 1 - #else //old style panel with shift register - //arduino pin witch triggers an piezzo beeper - #define BEEPER 18 - - //buttons are attached to a shift register - #define SHIFT_CLK 38 - #define SHIFT_LD 42 - #define SHIFT_OUT 40 - #define SHIFT_EN 17 - - #define LCD_PINS_RS 16 - #define LCD_PINS_ENABLE 5 - #define LCD_PINS_D4 6 - #define LCD_PINS_D5 21 - #define LCD_PINS_D6 20 - #define LCD_PINS_D7 19 - - //encoder rotation values - #define encrot0 0 - #define encrot1 2 - #define encrot2 3 - #define encrot3 1 - - - //bits in the shift register that carry the buttons for: - // left up center down right red - #define BL_LE 7 - #define BL_UP 6 - #define BL_MI 5 - #define BL_DW 4 - #define BL_RI 3 - #define BL_ST 2 - - #define BLEN_B 1 - #define BLEN_A 0 - #endif -#endif //ULTRA_LCD - -#endif - -/**************************************************************************************** -* Teensylu 0.7 pin assingments (ATMEGA90USB) -* Requires the Teensyduino software with Teensy2.0++ selected in arduino IDE! -****************************************************************************************/ -#if MOTHERBOARD == 8 -#define MOTHERBOARD 8 -#define KNOWN_BOARD 1 - - -#define X_STEP_PIN 0 -#define X_DIR_PIN 1 -#define X_ENABLE_PIN 39 -#define X_MIN_PIN 13 -#define X_MAX_PIN -1 - -#define Y_STEP_PIN 2 -#define Y_DIR_PIN 3 -#define Y_ENABLE_PIN 38 -#define Y_MIN_PIN 14 -#define Y_MAX_PIN -1 - -#define Z_STEP_PIN 4 -#define Z_DIR_PIN 5 -#define Z_ENABLE_PIN 23 -#define Z_MIN_PIN 15 -#define Z_MAX_PIN -1 - -#define E_STEP_PIN 6 -#define E_DIR_PIN 7 -#define E_ENABLE_PIN 19 - - - -#define HEATER_0_PIN 21 // Extruder -#define HEATER_1_PIN 20 // Bed -#define HEATER_2_PIN -1 -#define FAN_PIN 22 // Fan - -#define TEMP_0_PIN 7 // Extruder -#define TEMP_1_PIN 6 // Bed -#define TEMP_2_PIN -1 - -#define SDPOWER -1 -#define SDSS 8 -#define LED_PIN -1 -#define PS_ON_PIN -1 -#define KILL_PIN -1 -#define ALARM_PIN -1 - -#ifndef SDSUPPORT -// these pins are defined in the SD library if building with SD support - #define SCK_PIN 9 - #define MISO_PIN 11 - #define MOSI_PIN 10 -#endif -#endif - -#ifndef KNOWN_BOARD -#error Unknown MOTHERBOARD value in configuration.h -#endif - -//List of pins which to ignore when asked to change by gcode, 0 and 1 are RX and TX, do not mess with those! -#define SENSITIVE_PINS {0, 1, X_STEP_PIN, X_DIR_PIN, X_ENABLE_PIN, X_MIN_PIN, X_MAX_PIN, Y_STEP_PIN, Y_DIR_PIN, Y_ENABLE_PIN, Y_MIN_PIN, Y_MAX_PIN, Z_STEP_PIN, Z_DIR_PIN, Z_ENABLE_PIN, Z_MIN_PIN, Z_MAX_PIN, E_STEP_PIN, E_DIR_PIN, E_ENABLE_PIN, LED_PIN, PS_ON_PIN, HEATER_0_PIN, HEATER_1_PIN, HEATER_2_PIN, FAN_PIN, TEMP_0_PIN, TEMP_1_PIN, TEMP_2_PIN} - +#ifndef PINS_H +#define PINS_H + +/**************************************************************************************** +* Arduino pin assignment +* +* ATMega168 +* +-\/-+ +* PC6 1| |28 PC5 (AI 5 / D19) +* (D 0) PD0 2| |27 PC4 (AI 4 / D18) +* (D 1) PD1 3| |26 PC3 (AI 3 / D17) +* (D 2) PD2 4| |25 PC2 (AI 2 / D16) +* PWM+ (D 3) PD3 5| |24 PC1 (AI 1 / D15) +* (D 4) PD4 6| |23 PC0 (AI 0 / D14) +* VCC 7| |22 GND +* GND 8| |21 AREF +* PB6 9| |20 AVCC +* PB7 10| |19 PB5 (D 13) +* PWM+ (D 5) PD5 11| |18 PB4 (D 12) +* PWM+ (D 6) PD6 12| |17 PB3 (D 11) PWM +* (D 7) PD7 13| |16 PB2 (D 10) PWM +* (D 8) PB0 14| |15 PB1 (D 9) PWM +* +----+ +****************************************************************************************/ +#if MOTHERBOARD == 0 +#define KNOWN_BOARD 1 + +#ifndef __AVR_ATmega168__ +#error Oops! Make sure you have 'Arduino Diecimila' selected from the boards menu. +#endif + +#define X_STEP_PIN 2 +#define X_DIR_PIN 3 +#define X_ENABLE_PIN -1 +#define X_MIN_PIN 4 +#define X_MAX_PIN 9 + +#define Y_STEP_PIN 10 +#define Y_DIR_PIN 7 +#define Y_ENABLE_PIN -1 +#define Y_MIN_PIN 8 +#define Y_MAX_PIN 13 + +#define Z_STEP_PIN 19 +#define Z_DIR_PIN 18 +#define Z_ENABLE_PIN 5 +#define Z_MIN_PIN 17 +#define Z_MAX_PIN 16 + +#define E_STEP_PIN 11 +#define E_DIR_PIN 12 +#define E_ENABLE_PIN -1 + +#define SDPOWER -1 +#define SDSS -1 +#define LED_PIN -1 +#define FAN_PIN -1 +#define PS_ON_PIN 15 +#define KILL_PIN -1 + +#define HEATER_0_PIN 6 +#define TEMP_0_PIN 0 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! +#define HEATER_1_PIN -1 +#define HEATER_2_PIN -1 +#endif + + + +/**************************************************************************************** +* Sanguino/RepRap Motherboard with direct-drive extruders +* +* ATMega644P +* +* +---\/---+ +* (D 0) PB0 1| |40 PA0 (AI 0 / D31) +* (D 1) PB1 2| |39 PA1 (AI 1 / D30) +* INT2 (D 2) PB2 3| |38 PA2 (AI 2 / D29) +* PWM (D 3) PB3 4| |37 PA3 (AI 3 / D28) +* PWM (D 4) PB4 5| |36 PA4 (AI 4 / D27) +* MOSI (D 5) PB5 6| |35 PA5 (AI 5 / D26) +* MISO (D 6) PB6 7| |34 PA6 (AI 6 / D25) +* SCK (D 7) PB7 8| |33 PA7 (AI 7 / D24) +* RST 9| |32 AREF +* VCC 10| |31 GND +* GND 11| |30 AVCC +* XTAL2 12| |29 PC7 (D 23) +* XTAL1 13| |28 PC6 (D 22) +* RX0 (D 8) PD0 14| |27 PC5 (D 21) TDI +* TX0 (D 9) PD1 15| |26 PC4 (D 20) TDO +* INT0 RX1 (D 10) PD2 16| |25 PC3 (D 19) TMS +* INT1 TX1 (D 11) PD3 17| |24 PC2 (D 18) TCK +* PWM (D 12) PD4 18| |23 PC1 (D 17) SDA +* PWM (D 13) PD5 19| |22 PC0 (D 16) SCL +* PWM (D 14) PD6 20| |21 PD7 (D 15) PWM +* +--------+ +* +****************************************************************************************/ +#if MOTHERBOARD == 1 +#define KNOWN_BOARD 1 + +#ifndef __AVR_ATmega644P__ +#error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu. +#endif + +#define X_STEP_PIN 15 +#define X_DIR_PIN 18 +#define X_ENABLE_PIN 19 +#define X_MIN_PIN 20 +#define X_MAX_PIN 21 + +#define Y_STEP_PIN 23 +#define Y_DIR_PIN 22 +#define Y_ENABLE_PIN 19 +#define Y_MIN_PIN 25 +#define Y_MAX_PIN 26 + +#define Z_STEP_PIN 29 +#define Z_DIR_PIN 30 +#define Z_ENABLE_PIN 31 +#define Z_MIN_PIN 2 +#define Z_MAX_PIN 1 + +#define E_STEP_PIN 12 +#define E_DIR_PIN 16 +#define E_ENABLE_PIN 3 + +#define SDPOWER -1 +#define SDSS -1 +#define LED_PIN 0 +#define FAN_PIN -1 +#define PS_ON_PIN -1 +#define KILL_PIN -1 + +#define HEATER_0_PIN 14 +#define TEMP_0_PIN 4 //D27 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! +#define HEATER_1_PIN -1 +#define HEATER_2_PIN -1 +/* Unused (1) (2) (3) 4 5 6 7 8 9 10 11 12 13 (14) (15) (16) 17 (18) (19) (20) (21) (22) (23) 24 (25) (26) (27) 28 (29) (30) (31) */ + + + +#endif + + +/**************************************************************************************** +* RepRap Motherboard ****---NOOOOOO RS485/EXTRUDER CONTROLLER!!!!!!!!!!!!!!!!!---******* +* +****************************************************************************************/ +#if MOTHERBOARD == 2 +#define KNOWN_BOARD 1 + +#ifndef __AVR_ATmega644P__ +#error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu. +#endif + +#define X_STEP_PIN 15 +#define X_DIR_PIN 18 +#define X_ENABLE_PIN 19 +#define X_MIN_PIN 20 +#define X_MAX_PIN 21 + +#define Y_STEP_PIN 23 +#define Y_DIR_PIN 22 +#define Y_ENABLE_PIN 24 +#define Y_MIN_PIN 25 +#define Y_MAX_PIN 26 + +#define Z_STEP_PINN 27 +#define Z_DIR_PINN 28 +#define Z_ENABLE_PIN 29 +#define Z_MIN_PIN 30 +#define Z_MAX_PIN 31 + +#define E_STEP_PIN 17 +#define E_DIR_PIN 16 +#define E_ENABLE_PIN -1 + +#define SDPOWER -1 +#define SDSS 4 +#define LED_PIN 0 + +#define SD_CARD_WRITE 2 +#define SD_CARD_DETECT 3 +#define SD_CARD_SELECT 4 + +//our RS485 pins +#define TX_ENABLE_PIN 12 +#define RX_ENABLE_PIN 13 + +//pin for controlling the PSU. +#define PS_ON_PIN 14 + +#define FAN_PIN -1 +#define KILL_PIN -1 + +#define HEATER_0_PIN -1 +#define TEMP_0_PIN -1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! +#define HEATER_1_PIN -1 +#define HEATER_2_PIN -1 + + + +#endif + +/**************************************************************************************** +* Arduino Mega pin assignment +* +****************************************************************************************/ +#if MOTHERBOARD == 33 +#define MOTHERBOARD 3 +#define RAMPS_V_1_3 +#endif +#if MOTHERBOARD == 3 +#define KNOWN_BOARD 1 + +//////////////////FIX THIS////////////// +#ifndef __AVR_ATmega1280__ + #ifndef __AVR_ATmega2560__ + #error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu. + #endif +#endif + +// uncomment one of the following lines for RAMPS v1.3 or v1.0, comment both for v1.2 or 1.1 +// #define RAMPS_V_1_3 +// #define RAMPS_V_1_0 + +#ifdef RAMPS_V_1_3 + +#define X_STEP_PIN 54 +#define X_DIR_PIN 55 +#define X_ENABLE_PIN 38 +#define X_MIN_PIN 3 +#define X_MAX_PIN -1 //2 //Max endstops default to disabled "-1", set to commented value to enable. + +#define Y_STEP_PIN 60 +#define Y_DIR_PIN 61 +#define Y_ENABLE_PIN 56 +#define Y_MIN_PIN 14 +#define Y_MAX_PIN -1 //15 + +#define Z_STEP_PIN 46 +#define Z_DIR_PIN 48 +#define Z_ENABLE_PIN 62 +#define Z_MIN_PIN 18 +#define Z_MAX_PIN -1 //19 + +#define E_STEP_PIN 26 +#define E_DIR_PIN 28 +#define E_ENABLE_PIN 24 + +#define SDPOWER -1 +#define SDSS 53 +#define LED_PIN 13 +#define FAN_PIN 9 +#define PS_ON_PIN 12 +#define KILL_PIN -1 + +#define HEATER_0_PIN 10 +#define HEATER_1_PIN 8 +#define HEATER_2_PIN -1 +#define TEMP_0_PIN 13 // ANALOG NUMBERING +#define TEMP_1_PIN 14 // ANALOG NUMBERING +#define TEMP_2_PIN -1 // ANALOG NUMBERING + + +#else // RAMPS_V_1_1 or RAMPS_V_1_2 as default + +#define X_STEP_PIN 26 +#define X_DIR_PIN 28 +#define X_ENABLE_PIN 24 +#define X_MIN_PIN 3 +#define X_MAX_PIN -1 //2 + +#define Y_STEP_PIN 38 +#define Y_DIR_PIN 40 +#define Y_ENABLE_PIN 36 +#define Y_MIN_PIN 16 +#define Y_MAX_PIN -1 //17 + +#define Z_STEP_PIN 44 +#define Z_DIR_PIN 46 +#define Z_ENABLE_PIN 42 +#define Z_MIN_PIN 18 +#define Z_MAX_PIN -1 //19 + +#define E_STEP_PIN 32 +#define E_DIR_PIN 34 +#define E_ENABLE_PIN 30 + +#define SDPOWER 48 +#define SDSS 53 +#define LED_PIN 13 +#define PS_ON_PIN -1 +#define KILL_PIN -1 + + + +#ifdef RAMPS_V_1_0 // RAMPS_V_1_0 + #define HEATER_0_PIN 12 // RAMPS 1.0 + #define HEATER_1_PIN -1 // RAMPS 1.0 + #define FAN_PIN 11 // RAMPS 1.0 + +#else // RAMPS_V_1_1 or RAMPS_V_1_2 + #define HEATER_0_PIN 10 // RAMPS 1.1 + #define HEATER_1_PIN 8 // RAMPS 1.1 + #define FAN_PIN 9 // RAMPS 1.1 +#endif +#define HEATER_2_PIN -1 +#define TEMP_0_PIN 2 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! +#define TEMP_1_PIN 1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! +#define TEMP_2_PIN -1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! +#endif + +// SPI for Max6675 Thermocouple + +#ifndef SDSUPPORT +// these pins are defined in the SD library if building with SD support #define SCK_PIN 52 + #define MISO_PIN 50 + #define MOSI_PIN 51 + #define MAX6675_SS 53 +#else + #define MAX6675_SS 49 +#endif + + +#endif +/**************************************************************************************** +* Duemilanove w/ ATMega328P pin assignment +* +****************************************************************************************/ +#if MOTHERBOARD == 4 +#define KNOWN_BOARD 1 + +#ifndef __AVR_ATmega328P__ +#error Oops! Make sure you have 'Arduino Duemilanove w/ ATMega328' selected from the 'Tools -> Boards' menu. +#endif + +#define X_STEP_PIN 19 +#define X_DIR_PIN 18 +#define X_ENABLE_PIN -1 +#define X_MIN_PIN 17 +#define X_MAX_PIN -1 + +#define Y_STEP_PIN 10 +#define Y_DIR_PIN 7 +#define Y_ENABLE_PIN -1 +#define Y_MIN_PIN 8 +#define Y_MAX_PIN -1 + +#define Z_STEP_PIN 13 +#define Z_DIR_PIN 3 +#define Z_ENABLE_PIN 2 +#define Z_MIN_PIN 4 +#define Z_MAX_PIN -1 + +#define E_STEP_PIN 11 +#define E_DIR_PIN 12 +#define E_ENABLE_PIN -1 + +#define SDPOWER -1 +#define SDSS -1 +#define LED_PIN -1 +#define FAN_PIN 5 +#define PS_ON_PIN -1 +#define KILL_PIN -1 + +#define HEATER_0_PIN 6 +#define TEMP_0_PIN 0 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! +#define HEATER_1_PIN -1 +#define HEATER_2_PIN -1 + +#endif + +/**************************************************************************************** +* Gen6 pin assignment +* +****************************************************************************************/ +#if MOTHERBOARD == 5 +#define KNOWN_BOARD 1 + +#ifndef __AVR_ATmega644P__ + #error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu. +#endif + +//x axis pins + #define X_STEP_PIN 15 + #define X_DIR_PIN 18 + #define X_ENABLE_PIN 19 + #define X_MIN_PIN 20 + #define X_MAX_PIN -1 + + //y axis pins + #define Y_STEP_PIN 23 + #define Y_DIR_PIN 22 + #define Y_ENABLE_PIN 24 + #define Y_MIN_PIN 25 + #define Y_MAX_PIN -1 + + //z axis pins + #define Z_STEP_PIN 27 + #define Z_DIR_PIN 28 + #define Z_ENABLE_PIN 29 + #define Z_MIN_PIN 30 + #define Z_MAX_PIN -1 + + //extruder pins + #define E_STEP_PIN 4 //Edited @ EJE Electronics 20100715 + #define E_DIR_PIN 2 //Edited @ EJE Electronics 20100715 + #define E_ENABLE_PIN 3 //Added @ EJE Electronics 20100715 + #define TEMP_0_PIN 5 //changed @ rkoeppl 20110410 + #define HEATER_0_PIN 14 //changed @ rkoeppl 20110410 + #define HEATER_1_PIN -1 //changed @ rkoeppl 20110410 + #define HEATER_2_PIN -1 + + #define SDPOWER -1 + #define SDSS 17 + #define LED_PIN -1 //changed @ rkoeppl 20110410 + #define TEMP_1_PIN -1 //changed @ rkoeppl 20110410 + #define TEMP_2_PIN -1 + #define FAN_PIN -1 //changed @ rkoeppl 20110410 + #define PS_ON_PIN -1 //changed @ rkoeppl 20110410 + //our pin for debugging. + + #define DEBUG_PIN 0 + + //our RS485 pins + #define TX_ENABLE_PIN 12 + #define RX_ENABLE_PIN 13 + +#endif + +/**************************************************************************************** +* Sanguinololu pin assignment +* +****************************************************************************************/ +#if MOTHERBOARD == 62 +#define MOTHERBOARD 6 +#define SANGUINOLOLU_V_1_2 +#endif +#if MOTHERBOARD == 6 +#define KNOWN_BOARD 1 +#ifndef __AVR_ATmega644P__ +#error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu. +#endif + +#define X_STEP_PIN 15 +#define X_DIR_PIN 21 +#define X_MIN_PIN 18 +#define X_MAX_PIN -2 + +#define Y_STEP_PIN 22 +#define Y_DIR_PIN 23 +#define Y_MIN_PIN 19 +#define Y_MAX_PIN -1 + +#define Z_STEP_PIN 3 +#define Z_DIR_PIN 2 +#define Z_MIN_PIN 20 +#define Z_MAX_PIN -1 + +#define E_STEP_PIN 1 +#define E_DIR_PIN 0 + +#define LED_PIN -1 + +#define FAN_PIN -1 + +#define PS_ON_PIN -1 +#define KILL_PIN -1 + +#define HEATER_0_PIN 13 // (extruder) + +#ifdef SANGUINOLOLU_V_1_2 + +#define HEATER_1_PIN 12 // (bed) +#define X_ENABLE_PIN 14 +#define Y_ENABLE_PIN 14 +#define Z_ENABLE_PIN 26 +#define E_ENABLE_PIN 14 + +#else + +#define HEATER_1_PIN 14 // (bed) +#define X_ENABLE_PIN -1 +#define Y_ENABLE_PIN -1 +#define Z_ENABLE_PIN -1 +#define E_ENABLE_PIN -1 + +#endif + +#define TEMP_0_PIN 7 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 33 extruder) +#define TEMP_1_PIN 6 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 34 bed) +#define TEMP_2_PIN -1 +#define SDPOWER -1 +#define SDSS 31 +#define HEATER_2_PIN -1 + +#endif + + +#if MOTHERBOARD == 7 +#define KNOWN_BOARD +/***************************************************************** +* Ultimaker pin assignment +******************************************************************/ + +#ifndef __AVR_ATmega1280__ + #ifndef __AVR_ATmega2560__ + #error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu. + #endif +#endif + +#define X_STEP_PIN 25 +#define X_DIR_PIN 23 +#define X_MIN_PIN 22 +#define X_MAX_PIN 24 +#define X_ENABLE_PIN 27 + +#define Y_STEP_PIN 31 +#define Y_DIR_PIN 33 +#define Y_MIN_PIN 26 +#define Y_MAX_PIN 28 +#define Y_ENABLE_PIN 29 + +#define Z_STEP_PIN 37 +#define Z_DIR_PIN 39 +#define Z_MIN_PIN 30 +#define Z_MAX_PIN 32 +#define Z_ENABLE_PIN 35 + +#define HEATER_1_PIN 4 +#define TEMP_1_PIN 11 + +#define EXTRUDER_0_STEP_PIN 43 +#define EXTRUDER_0_DIR_PIN 45 +#define EXTRUDER_0_ENABLE_PIN 41 +#define HEATER_0_PIN 2 +#define TEMP_0_PIN 8 + +#define EXTRUDER_1_STEP_PIN 49 +#define EXTRUDER_1_DIR_PIN 47 +#define EXTRUDER_1_ENABLE_PIN 51 +#define EXTRUDER_1_HEATER_PIN 3 +#define EXTRUDER_1_TEMPERATURE_PIN 10 +#define HEATER_2_PIN 51 +#define TEMP_2_PIN 3 + + + +#define E_STEP_PIN EXTRUDER_0_STEP_PIN +#define E_DIR_PIN EXTRUDER_0_DIR_PIN +#define E_ENABLE_PIN EXTRUDER_0_ENABLE_PIN + +#define SDPOWER -1 +#define SDSS 53 +#define LED_PIN 13 +#define FAN_PIN 7 +#define PS_ON_PIN 12 +#define KILL_PIN -1 + +#ifdef ULTRA_LCD + + #ifdef NEWPANEL + //arduino pin witch triggers an piezzo beeper + #define BEEPER 18 + + #define LCD_PINS_RS 20 + #define LCD_PINS_ENABLE 17 + #define LCD_PINS_D4 16 + #define LCD_PINS_D5 21 + #define LCD_PINS_D6 5 + #define LCD_PINS_D7 6 + + //buttons are directly attached + #define BTN_EN1 40 + #define BTN_EN2 42 + #define BTN_ENC 19 //the click + + #define BLEN_C 2 + #define BLEN_B 1 + #define BLEN_A 0 + + #define SDCARDDETECT 38 + + //encoder rotation values + #define encrot0 0 + #define encrot1 2 + #define encrot2 3 + #define encrot3 1 + #else //old style panel with shift register + //arduino pin witch triggers an piezzo beeper + #define BEEPER 18 + + //buttons are attached to a shift register + #define SHIFT_CLK 38 + #define SHIFT_LD 42 + #define SHIFT_OUT 40 + #define SHIFT_EN 17 + + #define LCD_PINS_RS 16 + #define LCD_PINS_ENABLE 5 + #define LCD_PINS_D4 6 + #define LCD_PINS_D5 21 + #define LCD_PINS_D6 20 + #define LCD_PINS_D7 19 + + //encoder rotation values + #define encrot0 0 + #define encrot1 2 + #define encrot2 3 + #define encrot3 1 + + + //bits in the shift register that carry the buttons for: + // left up center down right red + #define BL_LE 7 + #define BL_UP 6 + #define BL_MI 5 + #define BL_DW 4 + #define BL_RI 3 + #define BL_ST 2 + + #define BLEN_B 1 + #define BLEN_A 0 + #endif +#endif //ULTRA_LCD + +#endif + +/**************************************************************************************** +* Teensylu 0.7 pin assingments (ATMEGA90USB) +* Requires the Teensyduino software with Teensy2.0++ selected in arduino IDE! +****************************************************************************************/ +#if MOTHERBOARD == 8 +#define MOTHERBOARD 8 +#define KNOWN_BOARD 1 + + +#define X_STEP_PIN 0 +#define X_DIR_PIN 1 +#define X_ENABLE_PIN 39 +#define X_MIN_PIN 13 +#define X_MAX_PIN -1 + +#define Y_STEP_PIN 2 +#define Y_DIR_PIN 3 +#define Y_ENABLE_PIN 38 +#define Y_MIN_PIN 14 +#define Y_MAX_PIN -1 + +#define Z_STEP_PIN 4 +#define Z_DIR_PIN 5 +#define Z_ENABLE_PIN 23 +#define Z_MIN_PIN 15 +#define Z_MAX_PIN -1 + +#define E_STEP_PIN 6 +#define E_DIR_PIN 7 +#define E_ENABLE_PIN 19 + + + +#define HEATER_0_PIN 21 // Extruder +#define HEATER_1_PIN 20 // Bed +#define HEATER_2_PIN -1 +#define FAN_PIN 22 // Fan + +#define TEMP_0_PIN 7 // Extruder +#define TEMP_1_PIN 6 // Bed +#define TEMP_2_PIN -1 + +#define SDPOWER -1 +#define SDSS 8 +#define LED_PIN -1 +#define PS_ON_PIN -1 +#define KILL_PIN -1 +#define ALARM_PIN -1 + +#ifndef SDSUPPORT +// these pins are defined in the SD library if building with SD support + #define SCK_PIN 9 + #define MISO_PIN 11 + #define MOSI_PIN 10 +#endif +#endif + +#ifndef KNOWN_BOARD +#error Unknown MOTHERBOARD value in configuration.h +#endif + +//List of pins which to ignore when asked to change by gcode, 0 and 1 are RX and TX, do not mess with those! +#define SENSITIVE_PINS {0, 1, X_STEP_PIN, X_DIR_PIN, X_ENABLE_PIN, X_MIN_PIN, X_MAX_PIN, Y_STEP_PIN, Y_DIR_PIN, Y_ENABLE_PIN, Y_MIN_PIN, Y_MAX_PIN, Z_STEP_PIN, Z_DIR_PIN, Z_ENABLE_PIN, Z_MIN_PIN, Z_MAX_PIN, E_STEP_PIN, E_DIR_PIN, E_ENABLE_PIN, LED_PIN, PS_ON_PIN, HEATER_0_PIN, HEATER_1_PIN, HEATER_2_PIN, FAN_PIN, TEMP_0_PIN, TEMP_1_PIN, TEMP_2_PIN} + #endif diff --git a/Marlin/ultralcd.pde b/Marlin/ultralcd.pde index 981aa8147..91d1a54a8 100644 --- a/Marlin/ultralcd.pde +++ b/Marlin/ultralcd.pde @@ -42,6 +42,19 @@ static long previous_millis_buttons=0; static MainMenu menu; +#include + +void lcdProgMemprint(const char *str) +{ + char ch=pgm_read_byte(str); + while(ch) + { + lcd.print(ch); + ch=pgm_read_byte(++str); + } +} +#define lcdprintPGM(x) lcdProgMemprint(PSTR(x)) + //=========================================================================== //=============================functions ============================ @@ -264,9 +277,9 @@ void MainMenu::showStatus() feedmultiplychanged=false; encoderpos=feedmultiply; clear(); - lcd.setCursor(0,0);lcd.print("\002123/567\001 "); + lcd.setCursor(0,0);lcdprintPGM("\002123/567\001 "); #if defined BED_USES_THERMISTOR || defined BED_USES_AD595 - lcd.setCursor(10,0);lcd.print("B123/567\001 "); + lcd.setCursor(10,0);lcdprintPGM("B123/567\001 "); #endif } @@ -311,7 +324,7 @@ void MainMenu::showStatus() if(starttime!=oldtime) { - lcd.print(itostr2(time/60));lcd.print("h ");lcd.print(itostr2(time%60));lcd.print("m"); + lcd.print(itostr2(time/60));lcdprintPGM("h ");lcd.print(itostr2(time%60));lcdprintPGM("m"); oldtime=time; } } @@ -320,7 +333,7 @@ void MainMenu::showStatus() if((currentz!=oldzpos)||force_lcd_update) { lcd.setCursor(10,1); - lcd.print("Z:");lcd.print(itostr31(currentz)); + lcdprintPGM("Z:");lcd.print(itostr31(currentz)); oldzpos=currentz; } static int oldfeedmultiply=0; @@ -339,7 +352,7 @@ void MainMenu::showStatus() { oldfeedmultiply=curfeedmultiply; lcd.setCursor(0,2); - lcd.print(itostr3(curfeedmultiply));lcd.print("% "); + lcd.print(itostr3(curfeedmultiply));lcdprintPGM("% "); } if(messagetext[0]!='\0') { @@ -353,9 +366,9 @@ void MainMenu::showStatus() if(force_lcd_update) //initial display of content { encoderpos=feedmultiply; - lcd.setCursor(0,0);lcd.print("\002123/567\001 "); + lcd.setCursor(0,0);lcdprintPGM("\002123/567\001 "); #if defined BED_USES_THERMISTOR || defined BED_USES_AD595 - lcd.setCursor(10,0);lcd.print("B123/567\001 "); + lcd.setCursor(10,0);lcdprintPGM("B123/567\001 "); #endif } @@ -405,7 +418,7 @@ void MainMenu::showPrepare() { if(force_lcd_update) { - lcd.setCursor(0,line);lcd.print(" Prepare"); + lcd.setCursor(0,line);lcdprintPGM(" Prepare"); } if((activeline==line) && CLICKED) { @@ -418,7 +431,7 @@ void MainMenu::showPrepare() { if(force_lcd_update) { - lcd.setCursor(0,line);lcd.print(" Auto Home"); + lcd.setCursor(0,line);lcdprintPGM(" Auto Home"); } if((activeline==line) && CLICKED) { @@ -431,7 +444,7 @@ void MainMenu::showPrepare() { if(force_lcd_update) { - lcd.setCursor(0,line);lcd.print(" Set Origin"); + lcd.setCursor(0,line);lcdprintPGM(" Set Origin"); } if((activeline==line) && CLICKED) @@ -445,7 +458,7 @@ void MainMenu::showPrepare() { if(force_lcd_update) { - lcd.setCursor(0,line);lcd.print(" Preheat"); + lcd.setCursor(0,line);lcdprintPGM(" Preheat"); } if((activeline==line) && CLICKED) { @@ -458,7 +471,7 @@ void MainMenu::showPrepare() { if(force_lcd_update) { - lcd.setCursor(0,line);lcd.print(" Extrude"); + lcd.setCursor(0,line);lcdprintPGM(" Extrude"); } if((activeline==line) && CLICKED) { @@ -472,7 +485,7 @@ void MainMenu::showPrepare() { if(force_lcd_update) { - lcd.setCursor(0,line);lcd.print(" Disable Steppers"); + lcd.setCursor(0,line);lcdprintPGM(" Disable Steppers"); } if((activeline==line) && CLICKED) { @@ -541,7 +554,7 @@ void MainMenu::showControl() { if(force_lcd_update) { - lcd.setCursor(0,line);lcd.print(" Control"); + lcd.setCursor(0,line);lcdprintPGM(" Control"); } if((activeline==line) && CLICKED) { @@ -554,7 +567,7 @@ void MainMenu::showControl() { if(force_lcd_update) { - lcd.setCursor(0,line);lcd.print(" \002Nozzle:"); + lcd.setCursor(0,line);lcdprintPGM(" \002Nozzle:"); lcd.setCursor(13,line);lcd.print(ftostr3(intround(degHotend0()))); } @@ -588,7 +601,7 @@ void MainMenu::showControl() { if(force_lcd_update) { - lcd.setCursor(0,line);lcd.print(" Fan speed:"); + lcd.setCursor(0,line);lcdprintPGM(" Fan speed:"); lcd.setCursor(13,line);lcd.print(ftostr3(fanpwm)); } @@ -625,8 +638,8 @@ void MainMenu::showControl() { if(force_lcd_update) { - lcd.setCursor(0,line);lcd.print(" Acc:"); - lcd.setCursor(13,line);lcd.print(itostr3(acceleration/100));lcd.print("00"); + lcd.setCursor(0,line);lcdprintPGM(" Acc:"); + lcd.setCursor(13,line);lcd.print(itostr3(acceleration/100));lcdprintPGM("00"); } if((activeline==line) ) @@ -650,7 +663,7 @@ void MainMenu::showControl() { if(encoderpos<5) encoderpos=5; if(encoderpos>990) encoderpos=990; - lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));lcd.print("00"); + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));lcdprintPGM("00"); } } }break; @@ -658,7 +671,7 @@ void MainMenu::showControl() { if(force_lcd_update) { - lcd.setCursor(0,line);lcd.print(" Vxy-jerk: "); + lcd.setCursor(0,line);lcdprintPGM(" Vxy-jerk: "); lcd.setCursor(13,line);lcd.print(itostr3(max_xy_jerk/60)); } @@ -692,7 +705,7 @@ void MainMenu::showControl() { if(force_lcd_update) { - lcd.setCursor(0,line);lcd.print(" PID-P: "); + lcd.setCursor(0,line);lcdprintPGM(" PID-P: "); lcd.setCursor(13,line);lcd.print(itostr4(Kp)); } @@ -726,7 +739,7 @@ void MainMenu::showControl() { if(force_lcd_update) { - lcd.setCursor(0,line);lcd.print(" PID-I: "); + lcd.setCursor(0,line);lcdprintPGM(" PID-I: "); lcd.setCursor(13,line);lcd.print(ftostr51(Ki)); } @@ -760,7 +773,7 @@ void MainMenu::showControl() { if(force_lcd_update) { - lcd.setCursor(0,line);lcd.print(" PID-D: "); + lcd.setCursor(0,line);lcdprintPGM(" PID-D: "); lcd.setCursor(13,line);lcd.print(itostr4(Kd)); } @@ -797,7 +810,7 @@ void MainMenu::showControl() { if(force_lcd_update) { - lcd.setCursor(0,line);lcd.print(" PID-C: "); + lcd.setCursor(0,line);lcdprintPGM(" PID-C: "); lcd.setCursor(13,line);lcd.print(itostr3(Kc)); } @@ -834,11 +847,11 @@ void MainMenu::showControl() { if(force_lcd_update) { - lcd.setCursor(0,line);lcd.print(" Vmax "); - if(i==ItemC_vmaxx)lcd.print("x:"); - if(i==ItemC_vmaxy)lcd.print("y:"); - if(i==ItemC_vmaxz)lcd.print("z:"); - if(i==ItemC_vmaxe)lcd.print("e:"); + lcd.setCursor(0,line);lcdprintPGM(" Vmax "); + if(i==ItemC_vmaxx)lcdprintPGM("x:"); + if(i==ItemC_vmaxy)lcdprintPGM("y:"); + if(i==ItemC_vmaxz)lcdprintPGM("z:"); + if(i==ItemC_vmaxe)lcdprintPGM("e:"); lcd.setCursor(13,line);lcd.print(itostr3(max_feedrate[i-ItemC_vmaxx]/60)); } @@ -873,7 +886,7 @@ void MainMenu::showControl() { if(force_lcd_update) { - lcd.setCursor(0,line);lcd.print(" Vmin:"); + lcd.setCursor(0,line);lcdprintPGM(" Vmin:"); lcd.setCursor(13,line);lcd.print(itostr3(minimumfeedrate/60)); } @@ -907,7 +920,7 @@ void MainMenu::showControl() { if(force_lcd_update) { - lcd.setCursor(0,line);lcd.print(" VTrav min:"); + lcd.setCursor(0,line);lcdprintPGM(" VTrav min:"); lcd.setCursor(13,line);lcd.print(itostr3(mintravelfeedrate/60)); } @@ -945,12 +958,12 @@ void MainMenu::showControl() { if(force_lcd_update) { - lcd.setCursor(0,line);lcd.print(" Amax "); - if(i==ItemC_amaxx)lcd.print("x:"); - if(i==ItemC_amaxy)lcd.print("y:"); - if(i==ItemC_amaxz)lcd.print("z:"); - if(i==ItemC_amaxe)lcd.print("e:"); - lcd.setCursor(13,line);lcd.print(itostr3(max_acceleration_units_per_sq_second[i-ItemC_amaxx]/100));lcd.print("00"); + lcd.setCursor(0,line);lcdprintPGM(" Amax "); + if(i==ItemC_amaxx)lcdprintPGM("x:"); + if(i==ItemC_amaxy)lcdprintPGM("y:"); + if(i==ItemC_amaxz)lcdprintPGM("z:"); + if(i==ItemC_amaxe)lcdprintPGM("e:"); + lcd.setCursor(13,line);lcd.print(itostr3(max_acceleration_units_per_sq_second[i-ItemC_amaxx]/100));lcdprintPGM("00"); } if((activeline==line) ) @@ -974,7 +987,7 @@ void MainMenu::showControl() { if(encoderpos<1) encoderpos=1; if(encoderpos>990) encoderpos=990; - lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));lcd.print("00"); + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));lcdprintPGM("00"); } } }break; @@ -982,8 +995,8 @@ void MainMenu::showControl() { if(force_lcd_update) { - lcd.setCursor(0,line);lcd.print(" A-retract:"); - lcd.setCursor(13,line);lcd.print(ftostr3(retract_acceleration/100));lcd.print("00"); + lcd.setCursor(0,line);lcdprintPGM(" A-retract:"); + lcd.setCursor(13,line);lcd.print(ftostr3(retract_acceleration/100));lcdprintPGM("00"); } if((activeline==line) ) @@ -1008,7 +1021,7 @@ void MainMenu::showControl() { if(encoderpos<10) encoderpos=10; if(encoderpos>990) encoderpos=990; - lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));lcd.print("00"); + lcd.setCursor(13,line);lcd.print(itostr3(encoderpos));lcdprintPGM("00"); } } }break; @@ -1016,7 +1029,7 @@ void MainMenu::showControl() { if(force_lcd_update) { - lcd.setCursor(0,line);lcd.print(" Esteps/mm:"); + lcd.setCursor(0,line);lcdprintPGM(" Esteps/mm:"); lcd.setCursor(13,line);lcd.print(itostr4(axis_steps_per_unit[3])); } @@ -1053,7 +1066,7 @@ void MainMenu::showControl() { if(force_lcd_update) { - lcd.setCursor(0,line);lcd.print(" Store EPROM"); + lcd.setCursor(0,line);lcdprintPGM(" Store EPROM"); } if((activeline==line) && CLICKED) { @@ -1067,7 +1080,7 @@ void MainMenu::showControl() { if(force_lcd_update) { - lcd.setCursor(0,line);lcd.print(" Load EPROM"); + lcd.setCursor(0,line);lcdprintPGM(" Load EPROM"); } if((activeline==line) && CLICKED) { @@ -1081,7 +1094,7 @@ void MainMenu::showControl() { if(force_lcd_update) { - lcd.setCursor(0,line);lcd.print(" Restore Failsafe"); + lcd.setCursor(0,line);lcdprintPGM(" Restore Failsafe"); } if((activeline==line) && CLICKED) { @@ -1165,7 +1178,7 @@ void MainMenu::showSD() { if(force_lcd_update) { - lcd.setCursor(0,line);lcd.print(" File"); + lcd.setCursor(0,line);lcdprintPGM(" File"); } if((activeline==line) && CLICKED) { @@ -1185,11 +1198,11 @@ void MainMenu::showSD() if(true) #endif { - lcd.print(" \004Refresh"); + lcdprintPGM(" \004Refresh"); } else { - lcd.print(" \004Insert Card"); + lcdprintPGM(" \004Insert Card"); } } @@ -1210,7 +1223,7 @@ void MainMenu::showSD() { card.getfilename(i-2); //Serial.print("Filenr:");Serial.println(i-2); - lcd.setCursor(0,line);lcd.print(" ");lcd.print(card.filename); + lcd.setCursor(0,line);lcdprintPGM(" ");lcd.print(card.filename); } if((activeline==line) && CLICKED) { @@ -1292,7 +1305,7 @@ void MainMenu::showMainMenu() { case ItemM_watch: { - if(force_lcd_update) {lcd.setCursor(0,line);lcd.print(" Watch \x7E");} + if(force_lcd_update) {lcd.setCursor(0,line);lcdprintPGM(" Watch \x7E");} if((activeline==line)&&CLICKED) { BLOCK; @@ -1302,7 +1315,7 @@ void MainMenu::showMainMenu() } break; case ItemM_prepare: { - if(force_lcd_update) {lcd.setCursor(0,line);lcd.print(" Prepare \x7E");} + if(force_lcd_update) {lcd.setCursor(0,line);lcdprintPGM(" Prepare \x7E");} if((activeline==line)&&CLICKED) { BLOCK; @@ -1313,7 +1326,7 @@ void MainMenu::showMainMenu() case ItemM_control: { - if(force_lcd_update) {lcd.setCursor(0,line);lcd.print(" Control \x7E");} + if(force_lcd_update) {lcd.setCursor(0,line);lcdprintPGM(" Control \x7E");} if((activeline==line)&&CLICKED) { BLOCK; @@ -1334,13 +1347,13 @@ void MainMenu::showMainMenu() #endif { if(card.sdprinting) - lcd.print(" Stop Print \x7E"); + lcdprintPGM(" Stop Print \x7E"); else - lcd.print(" Card Menu \x7E"); + lcdprintPGM(" Card Menu \x7E"); } else { - lcd.print(" No Card"); + lcdprintPGM(" No Card"); } } #ifdef CARDINSERTED