Allow FAN_PIN override, pins cleanup (#10956)

This commit is contained in:
Scott Lahteine 2018-06-07 16:46:13 -05:00 committed by GitHub
parent 55aedf036b
commit 7ba5afff01
Signed by: GitHub
GPG key ID: 4AEE18F83AFDEB23
63 changed files with 329 additions and 240 deletions

View file

@ -132,7 +132,9 @@
#define HEATER_0_PIN 15 // C5
#define HEATER_BED_PIN 14 // C4
#define FAN_PIN 16 // C6 PWM3A
#ifndef FAN_PIN
#define FAN_PIN 16 // C6 PWM3A
#endif
//
// Misc. Functions

View file

@ -107,7 +107,9 @@
#define HEATER_3_PIN 97 // PC20 on piggy
#define HEATER_BED_PIN 69 // PA0
#define FAN_PIN 92 // PA5
#ifndef FAN_PIN
#define FAN_PIN 92 // PA5
#endif
#define FAN1_PIN 31 // PA7
//

View file

@ -133,7 +133,10 @@
//
#define HEATER_0_PIN 13 // (extruder)
#define HEATER_BED_PIN 12 // (bed)
#define FAN_PIN 4
#ifndef FAN_PIN
#define FAN_PIN 4
#endif
//
// Misc. Functions

View file

@ -148,7 +148,9 @@
//
// Heaters / Fans
//
#define FAN_PIN 4 // D4 PC26 FET_PWM1
#ifndef FAN_PIN
#define FAN_PIN 4 // D4 PC26 FET_PWM1
#endif
#define FAN1_PIN 5 // D5 PC25 FET_PWM2
#define HEATER_0_PIN 6 // D6 PC24 FET_PWM3

View file

@ -82,7 +82,9 @@
// EFB
#define HEATER_0_PIN P2_04
#define HEATER_BED_PIN P2_05
#define FAN_PIN P2_07
#ifndef FAN_PIN
#define FAN_PIN P2_07
#endif
#define FAN1_PIN P0_26
#if ENABLED(AZSMZ_12864)

View file

@ -24,22 +24,29 @@
* AZTEEG_X3_PRO (Arduino Mega) pin assignments
*/
#ifndef __AVR_ATmega2560__
#error "Oops! Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu."
#endif
#if HOTENDS > 5 || E_STEPPERS > 5
#error "Azteeg X3 Pro supports up to 5 hotends / E-steppers. Comment out this line to continue."
#endif
#if ENABLED(CASE_LIGHT_ENABLE) && !PIN_EXISTS(CASE_LIGHT)
#define CASE_LIGHT_PIN 44 // Define before RAMPS pins include
#endif
#define BOARD_NAME "Azteeg X3 Pro"
#include "pins_RAMPS.h"
#ifndef __AVR_ATmega2560__
#error "Oops! Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu."
//
// RAMPS pins overrides
//
#if ENABLED(CASE_LIGHT_ENABLE) && !PIN_EXISTS(CASE_LIGHT)
#define CASE_LIGHT_PIN 44
#endif
#ifndef FAN_PIN
#define FAN_PIN 6
#endif
#include "pins_RAMPS.h"
// DIGIPOT slave addresses
#define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT 0x2C (0x58 <- 0x2C << 1)
#define DIGIPOT_I2C_ADDRESS_B 0x2E // unshifted slave address for second DIGIPOT 0x2E (0x5C <- 0x2E << 1)
@ -116,9 +123,6 @@
#define HEATER_6_PIN 6
#define HEATER_7_PIN 11
#undef FAN_PIN
#define FAN_PIN 6 // Part Cooling System
#ifndef CONTROLLER_FAN_PIN
#define CONTROLLER_FAN_PIN 4 // Pin used for the fan to cool motherboard (-1 to disable)
#endif

View file

@ -85,7 +85,9 @@
#define HEATER_BED_PIN P2_07
#define HEATER_0_PIN P2_04
#define HEATER_1_PIN P2_05
#define FAN_PIN P0_26
#ifndef FAN_PIN
#define FAN_PIN P0_26
#endif
#define FAN1_PIN P1_22
//

View file

@ -103,7 +103,9 @@
#define HEATER_BED2_PIN -1 // BED2
#define HEATER_BED3_PIN -1 // BED3
#define FAN_PIN PB10
#ifndef FAN_PIN
#define FAN_PIN PB10
#endif
#define FAN_SOFT_PWM

View file

@ -82,7 +82,9 @@
//
#define HEATER_0_PIN P2_7
#define HEATER_BED_PIN P2_5
#define FAN_PIN P2_4
#ifndef FAN_PIN
#define FAN_PIN P2_4
#endif
//
// Unused

View file

@ -115,7 +115,9 @@
#define HEATER_0_PIN 32 // A4 Extruder
#define HEATER_BED_PIN 18 // E6 Bed
#define FAN_PIN 31 // A3 Fan
#ifndef FAN_PIN
#define FAN_PIN 31 // A3 Fan
#endif
//
// Misc. Functions

View file

@ -125,7 +125,9 @@
//
#define HEATER_0_PIN 27 // B7
#define HEATER_BED_PIN 26 // B6 Bed
#define FAN_PIN 16 // C6 Fan, PWM3A
#ifndef FAN_PIN
#define FAN_PIN 16 // C6 Fan, PWM3A
#endif
//
// Misc. Functions

View file

@ -31,6 +31,7 @@
#endif
#define BOARD_NAME "Cheaptronic v2.0"
//
// Limit Switches
//
@ -84,6 +85,28 @@
#define HEATER_1_PIN 7
#define HEATER_2_PIN 8
#define HEATER_BED_PIN 9
#ifndef FAN_PIN
#define FAN_PIN 3
#endif
#define FAN2_PIN 58 // additional fan or light control output
//
// Other board specific pins
//
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN 37 // board input labeled as F-DET
#endif
#define Z_MIN_PROBE_PIN 36 // additional external board input labeled as E-SENS (should be used for Z-probe)
#define LED_PIN 13
#define SPINDLE_ENABLE_PIN 4 // additional PWM pin 1 at JP1 connector - should be used for laser control too
#define EXT_2 5 // additional PWM pin 2 at JP1 connector
#define EXT_3 2 // additional PWM pin 3 at JP1 connector
#define PS_ON_PIN 45
#define KILL_PIN 46
#ifndef FILWIDTH_PIN
#define FILWIDTH_PIN 11 // shared with TEMP_3 analog input
#endif
//
// LCD
@ -105,23 +128,3 @@
#define BTN_EN1 11
#define BTN_EN2 12
#define BTN_ENC 43
//
// Other board specific pins
//
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN 37 // board input labeled as F-DET
#endif
#define Z_MIN_PROBE_PIN 36 // additional external board input labeled as E-SENS (should be used for Z-probe)
#define LED_PIN 13
#define SPINDLE_ENABLE_PIN 4 // additional PWM pin 1 at JP1 connector - should be used for laser control too
#define EXT_2 5 // additional PWM pin 2 at JP1 connector
#define EXT_3 2 // additional PWM pin 3 at JP1 connector
#define FAN_PIN 3
#define FAN2_PIN 58 // additional fan or light control output
#define PS_ON_PIN 45
#define KILL_PIN 46
#ifndef FILWIDTH_PIN
#define FILWIDTH_PIN 11 // shared with TEMP_3 analog input
#endif

View file

@ -102,7 +102,9 @@
#define HEATER_BED2_PIN -1 // BED2
#define HEATER_BED3_PIN -1 // BED3
#define FAN_PIN PG14 // MAIN BOARD FAN
#ifndef FAN_PIN
#define FAN_PIN PG14 // MAIN BOARD FAN
#endif
#define FAN_SOFT_PWM

View file

@ -65,7 +65,9 @@
#define HEATER_3_PIN 46
#define HEATER_BED_PIN 2
//#define FAN_PIN 7 // common PWM pin for all tools
#ifndef FAN_PIN
//#define FAN_PIN 7 // common PWM pin for all tools
#endif
#define ORIG_E0_AUTO_FAN_PIN 7
#define ORIG_E1_AUTO_FAN_PIN 7

View file

@ -65,7 +65,9 @@
#define HEATER_3_PIN 3
#define HEATER_BED_PIN 24
#define FAN_PIN 5 // 5 is PWMtool3 -> 7 is common PWM pin for all tools
#ifndef FAN_PIN
#define FAN_PIN 5 // 5 is PWMtool3 -> 7 is common PWM pin for all tools
#endif
#define ORIG_E0_AUTO_FAN_PIN 7
#define ORIG_E1_AUTO_FAN_PIN 7

View file

@ -98,12 +98,15 @@
//
#define HEATER_BED_PIN P2_05
#define HEATER_0_PIN P2_07 // FET 1
#define AUTO_FAN_PIN P2_04 // FET 4
#define FAN_PIN P2_06 // ReMix FET 4, Mini FET 3
#ifndef FAN_PIN
#define FAN_PIN P2_06 // ReMix FET 4, Mini FET 3
#endif
//
// Auto fans
//
#define AUTO_FAN_PIN P2_04 // FET 4
#define ORIG_E0_AUTO_FAN_PIN AUTO_FAN_PIN
#define ORIG_E1_AUTO_FAN_PIN AUTO_FAN_PIN
#define ORIG_E2_AUTO_FAN_PIN AUTO_FAN_PIN

View file

@ -115,17 +115,19 @@
#define HEATER_BED_PIN P2_05
#define HEATER_0_PIN P2_07 // FET 1
#define HEATER_1_PIN P1_23 // FET 2
#if HOTENDS == 3
#define HEATER_2_PIN P1_22 // FET 3
#define AUTO_FAN_PIN P1_18 // FET 6
#else
#define AUTO_FAN_PIN P1_22 // FET 3
#define HEATER_2_PIN P1_22 // FET 3
#ifndef FAN_PIN
#define FAN_PIN P2_06 // ReMix FET 4, Mini FET 3
#endif
#define FAN_PIN P2_06 // ReMix FET 4, Mini FET 3
//
// Auto fans
//
#if HOTENDS == 3
#define AUTO_FAN_PIN P1_18 // FET 6
#else
#define AUTO_FAN_PIN P1_22 // FET 3
#endif
#define ORIG_E0_AUTO_FAN_PIN AUTO_FAN_PIN
#define ORIG_E1_AUTO_FAN_PIN AUTO_FAN_PIN
#define ORIG_E2_AUTO_FAN_PIN AUTO_FAN_PIN

View file

@ -97,7 +97,9 @@
#define HEATER_1_PIN 8 // HOTEND1 MOSFET
#define HEATER_BED_PIN 39 // BED MOSFET
#define FAN_PIN 11 // FAN1 header on board - PRINT FAN
#ifndef FAN_PIN
#define FAN_PIN 11 // FAN1 header on board - PRINT FAN
#endif
#define FAN1_PIN 9 // FAN2 header on board - CONTROLLER FAN
#define FAN2_PIN 12 // FAN3 header on board - EXTRUDER0 FAN

View file

@ -88,7 +88,9 @@
#define HEATER_0_PIN 13 // HOTEND0 MOSFET
#define HEATER_BED_PIN 7 // BED MOSFET
#define FAN_PIN 11 // FAN1 header on board - PRINT FAN
#ifndef FAN_PIN
#define FAN_PIN 11 // FAN1 header on board - PRINT FAN
#endif
#define FAN1_PIN 12 // FAN2 header on board - CONTROLLER FAN
#define FAN2_PIN 9 // FAN3 header on board - EXTRUDER0 FAN
//#define FAN3_PIN 8 // FAN0 4-pin header on board

View file

@ -117,7 +117,9 @@
#define HEATER_0_PIN 3
#define HEATER_BED_PIN 4
#define FAN_PIN 8
#ifndef FAN_PIN
#define FAN_PIN 8
#endif
#define FAN1_PIN 6
//

View file

@ -134,7 +134,9 @@
#define HEATER_0_PIN 3
#define HEATER_BED_PIN 4
#define FAN_PIN 8
#ifndef FAN_PIN
#define FAN_PIN 8
#endif
#define FAN1_PIN 6
//

View file

@ -90,7 +90,9 @@
#define HEATER_2_PIN 17 // 12V PWM3
#define HEATER_BED_PIN 44 // DOUBLE 12V PWM
#define FAN_PIN 16 // 5V PWM
#ifndef FAN_PIN
#define FAN_PIN 16 // 5V PWM
#endif
//
// Misc. Functions

View file

@ -112,7 +112,7 @@
#define HEATER_0_PIN 4
#define HEATER_BED_PIN 3
#if GEN7_VERSION < 13 // Gen7 v1.3 removed the fan pin
#if !defined(FAN_PIN) && GEN7_VERSION < 13 // Gen7 v1.3 removed the fan pin
#define FAN_PIN 31
#endif

View file

@ -81,7 +81,9 @@
#define HEATER_0_PIN 2
#define HEATER_1_PIN 3
#define HEATER_BED_PIN 4
#define FAN_PIN 7
#ifndef FAN_PIN
#define FAN_PIN 7
#endif
//
// Misc. Functions

View file

@ -85,10 +85,11 @@
#define HEATER_0_PIN PB4 // EXTRUDER 1
#define HEATER_1_PIN PB5 // EXTRUDER 2
#define HEATER_2_PIN PB0 // EXTRUDER 3
#define HEATER_BED_PIN PB1 // BED
#define FAN_PIN PB7 // (Sprinter config)
#ifndef FAN_PIN
#define FAN_PIN PB7 // (Sprinter config)
#endif
#define FAN1_PIN PB8
#define FAN2_PIN PB9

View file

@ -76,13 +76,16 @@
#define HEATER_0_PIN PB6 // HOTEND0 MOSFET
#define HEATER_BED_PIN PB7 // BED MOSFET
// FAN_PIN is commented out here because the M200 example
// Configuration_adv.h does NOT override E0_AUTO_FAN_PIN.
#ifndef FAN_PIN
//#define FAN_PIN PB8 // FAN1 header on board - PRINT FAN
#endif
#define FAN1_PIN PB3 // FAN2 header on board - CONTROLLER FAN
#define FAN2_PIN -1 // FAN3 header on board - EXTRUDER0 FAN
// This board has only the controller fan and the extruder fan
// If someone hacks to put a direct power fan on the controller, PB3 could
// be used as a separate print cooling fan.
#define ORIG_E0_AUTO_FAN_PIN PB8
// FAN_PIN is commented out here because the M200 example
// Configuration_adv.h does NOT override E0_AUTO_FAN_PIN.
//#define FAN_PIN PB8 // FAN1 header on board - PRINT FAN
#define FAN1_PIN PB3 // FAN2 header on board - CONTROLLER FAN
#define FAN2_PIN -1 // FAN3 header on board - EXTRUDER0 FAN

View file

@ -112,7 +112,9 @@
#define HEATER_1_PIN 34
#define HEATER_BED_PIN 28
#define FAN_PIN 39
#ifndef FAN_PIN
#define FAN_PIN 39
#endif
#define FAN1_PIN 35
#define FAN2_PIN 36

View file

@ -87,7 +87,9 @@
#define HEATER_1_PIN 8
#define HEATER_BED_PIN 10
#define FAN_PIN 7 // IO pin. Buffer needed
#ifndef FAN_PIN
#define FAN_PIN 7 // IO pin. Buffer needed
#endif
//
// Misc. Functions

View file

@ -101,7 +101,9 @@
#define HEATER_1_PIN 8
#define HEATER_BED_PIN 10
#define FAN_PIN 7
#ifndef FAN_PIN
#define FAN_PIN 7
#endif
#define FAN1_PIN 6
//

View file

@ -118,7 +118,9 @@
#define HEATER_2_PIN 8
#define HEATER_BED_PIN 10
#define FAN_PIN 6
#ifndef FAN_PIN
#define FAN_PIN 6
#endif
#define FAN1_PIN 7
//

View file

@ -172,23 +172,24 @@
#define HEATER_0_PIN MOSFET_A_PIN
#if ENABLED(IS_EFB) // Hotend, Fan, Bed
#define FAN_PIN MOSFET_B_PIN
#define HEATER_BED_PIN MOSFET_C_PIN
#elif ENABLED(IS_EEF) // Hotend, Hotend, Fan
#define HEATER_1_PIN MOSFET_B_PIN
#define FAN_PIN MOSFET_C_PIN
#elif ENABLED(IS_EEB) // Hotend, Hotend, Bed
#define HEATER_1_PIN MOSFET_B_PIN
#define HEATER_BED_PIN MOSFET_C_PIN
#elif ENABLED(IS_EFF) // Hotend, Fan, Fan
#define FAN_PIN MOSFET_B_PIN
#define FAN1_PIN MOSFET_C_PIN
#elif ENABLED(IS_SF) // Spindle, Fan
#define FAN_PIN MOSFET_C_PIN
#endif
#ifndef FAN_PIN
#if ENABLED(IS_EFB) || ENABLED(IS_EFF) // Hotend, Fan, Bed or Hotend, Fan, Fan
#define FAN_PIN MOSFET_B_PIN
#elif ENABLED(IS_EEF) || ENABLED(IS_SF) // Hotend, Hotend, Fan or Spindle, Fan
#define FAN_PIN MOSFET_C_PIN
#else
#define FAN_PIN MOSFET_D_PIN
#endif
#endif
//

View file

@ -106,7 +106,9 @@
#endif
#define HEATER_BED_PIN 4
#define FAN_PIN 8
#ifndef FAN_PIN
#define FAN_PIN 8
#endif
#define FAN1_PIN 6
//

View file

@ -87,7 +87,9 @@
#define HEATER_1_PIN 8 // EXTRUDER 2
#define HEATER_BED_PIN 3 // BED
#define FAN_PIN 9
#ifndef FAN_PIN
#define FAN_PIN 9
#endif
//
// Misc. Functions

View file

@ -40,7 +40,6 @@
#define PIN_P0_28 P0_28
*/
//
// Servo pin
//
@ -86,25 +85,20 @@
// Temperature Sensors
// 3.3V max when defined as an analog input
//
#define TEMP_BED_PIN 0 // A0 (TH1)
#define TEMP_0_PIN 1 // A1 (TH2)
#define TEMP_1_PIN 2 // A2 (TH3)
#define TEMP_2_PIN 3 // A3 (TH4)
//
// Heaters / Fans
//
#define HEATER_BED_PIN P2_05
#define HEATER_0_PIN P2_07
#define HEATER_1_PIN P2_06
#define FAN_PIN P2_04
#define PS_ON_PIN P0_25
#ifndef FAN_PIN
#define FAN_PIN P2_04
#endif
//
// Connector J7
@ -132,13 +126,18 @@
//
// Prusa i3 MK2 Multi Material Multiplexer Support
//
#if ENABLED(MK2_MULTIPLEXER)
#define E_MUX0_PIN P1_23 // J8-3
#define E_MUX1_PIN P2_12 // J8-4
#define E_MUX2_PIN P2_11 // J8-5
#endif
//
// Misc. Functions
//
#define PS_ON_PIN P0_25
#define LPC_SOFTWARE_SPI // MKS_SBASE needs a software SPI because the
// selected pins are not on a hardware SPI controller
/**
* Smart LCD adapter
@ -180,12 +179,6 @@
#define ENET_TXD0 P1_00 // J12-11
#define ENET_TXD1 P1_01 // J12-12
//
// Misc. Functions
//
#define LPC_SOFTWARE_SPI // MKS_SBASE needs a software SPI because the
// selected pins are not on a hardware SPI controller
// A custom cable is needed. See the README file in the
// Marlin\src\config\examples\Mks\Sbase directory

View file

@ -129,7 +129,9 @@
#define HEATER_0_PIN 3 // DONE PWM on RIGHT connector
#define HEATER_BED_PIN 4
#define FAN_PIN 14 // PWM on MIDDLE connector
#ifndef FAN_PIN
#define FAN_PIN 14 // PWM on MIDDLE connector
#endif
//
// Misc. Functions

View file

@ -125,7 +125,9 @@
//
#define HEATER_0_PIN 4
#define FAN_PIN 3
#ifndef FAN_PIN
#define FAN_PIN 3
#endif
//
// Misc. Functions

View file

@ -110,8 +110,9 @@
#define HEATER_2_PIN 45 // F7
#define HEATER_BED_PIN 14 // C4 PWM3C
#define FAN_PIN 16 // C6 PWM3A
#ifndef FAN_PIN
#define FAN_PIN 16 // C6 PWM3A
#endif
//
// Misc. Functions

View file

@ -190,7 +190,9 @@
#endif
#endif
#define FAN_PIN 16 // C6 PWM3A
#ifndef FAN_PIN
#define FAN_PIN 16 // C6 PWM3A
#endif
//
// LCD / Controller

View file

@ -149,7 +149,9 @@
#define HEATER_2_PIN 11
#define HEATER_BED_PIN 7 // BED
#define FAN_PIN 9
#ifndef FAN_PIN
#define FAN_PIN 9
#endif
#define FAN1_PIN 8
//

View file

@ -127,7 +127,9 @@
#define HEATER_2_PIN 6
#define HEATER_BED_PIN 3
#define FAN_PIN 8
#ifndef FAN_PIN
#define FAN_PIN 8
#endif
#define FAN1_PIN 6
#define FAN2_PIN 2

View file

@ -246,21 +246,15 @@
#define HEATER_0_PIN RAMPS_D10_PIN
#if ENABLED(IS_RAMPS_EFB) // Hotend, Fan, Bed
#define FAN_PIN RAMPS_D9_PIN
#define HEATER_BED_PIN RAMPS_D8_PIN
#elif ENABLED(IS_RAMPS_EEF) // Hotend, Hotend, Fan
#define HEATER_1_PIN RAMPS_D9_PIN
#define FAN_PIN RAMPS_D8_PIN
#elif ENABLED(IS_RAMPS_EEB) // Hotend, Hotend, Bed
#define HEATER_1_PIN RAMPS_D9_PIN
#define HEATER_BED_PIN RAMPS_D8_PIN
#elif ENABLED(IS_RAMPS_EFF) // Hotend, Fan, Fan
#define FAN_PIN RAMPS_D9_PIN
#define FAN1_PIN RAMPS_D8_PIN
#elif ENABLED(IS_RAMPS_SF) // Spindle, Fan
#define FAN_PIN RAMPS_D8_PIN
#else // Non-specific are "EFB" (i.e., "EFBF" or "EFBE")
#define FAN_PIN RAMPS_D9_PIN
#elif DISABLED(IS_RAMPS_SF) // Not Spindle, Fan (i.e., "EFBF" or "EFBE")
#define HEATER_BED_PIN RAMPS_D8_PIN
#if HOTENDS == 1
#define FAN1_PIN MOSFET_D_PIN
@ -270,7 +264,15 @@
#endif
#ifndef FAN_PIN
#if ENABLED(IS_RAMPS_EFB) || ENABLED(IS_RAMPS_EFF) // Hotend, Fan, Bed or Hotend, Fan, Fan
#define FAN_PIN RAMPS_D9_PIN
#elif ENABLED(IS_RAMPS_EEF) || ENABLED(IS_RAMPS_SF) // Hotend, Hotend, Fan or Spindle, Fan
#define FAN_PIN RAMPS_D8_PIN
#elif ENABLED(IS_RAMPS_EEB) // Hotend, Hotend, Bed
#define FAN_PIN 4 // IO pin. Buffer needed
#else // Non-specific are "EFB" (i.e., "EFBF" or "EFBE")
#define FAN_PIN RAMPS_D9_PIN
#endif
#endif
//

View file

@ -127,7 +127,9 @@
#define HEATER_2_PIN 11
#define HEATER_BED_PIN 8
#define FAN_PIN 12
#ifndef FAN_PIN
#define FAN_PIN 12
#endif
#define CONTROLLER_FAN_PIN -1
//

View file

@ -88,11 +88,15 @@
#if ENABLED(RAMPS_V_1_0)
#define HEATER_0_PIN 12
#define HEATER_BED_PIN -1
#ifndef FAN_PIN
#define FAN_PIN 11
#endif
#else // RAMPS_V_1_1 or RAMPS_V_1_2
#define HEATER_0_PIN 10
#define HEATER_BED_PIN 8
#ifndef FAN_PIN
#define FAN_PIN 9
#endif
#endif
//

View file

@ -165,21 +165,15 @@
#define HEATER_0_PIN RAMPS_D10_PIN
#if ENABLED(IS_RAMPS_EFB) // Hotend, Fan, Bed
#define FAN_PIN RAMPS_D9_PIN
#define HEATER_BED_PIN RAMPS_D8_PIN
#elif ENABLED(IS_RAMPS_EEF) // Hotend, Hotend, Fan
#define HEATER_1_PIN RAMPS_D9_PIN
#define FAN_PIN RAMPS_D8_PIN
#elif ENABLED(IS_RAMPS_EEB) // Hotend, Hotend, Bed
#define HEATER_1_PIN RAMPS_D9_PIN
#define HEATER_BED_PIN RAMPS_D8_PIN
#elif ENABLED(IS_RAMPS_EFF) // Hotend, Fan, Fan
#define FAN_PIN RAMPS_D9_PIN
#define FAN1_PIN RAMPS_D8_PIN
#elif ENABLED(IS_RAMPS_SF) // Spindle, Fan
#define FAN_PIN RAMPS_D8_PIN
#else // Non-specific are "EFB" (i.e., "EFBF" or "EFBE")
#define FAN_PIN RAMPS_D9_PIN
#elif DISABLED(IS_RAMPS_SF) // Not Spindle, Fan (i.e., "EFBF" or "EFBE")
#define HEATER_BED_PIN RAMPS_D8_PIN
#if HOTENDS == 1
#define FAN1_PIN MOSFET_D_PIN
@ -189,7 +183,15 @@
#endif
#ifndef FAN_PIN
#if ENABLED(IS_RAMPS_EFB) || ENABLED(IS_RAMPS_EFF) // Hotend, Fan, Bed or Hotend, Fan, Fan
#define FAN_PIN RAMPS_D9_PIN
#elif ENABLED(IS_RAMPS_EEF) || ENABLED(IS_RAMPS_SF) // Hotend, Hotend, Fan or Spindle, Fan
#define FAN_PIN RAMPS_D8_PIN
#elif ENABLED(IS_RAMPS_EEB) // Hotend, Hotend, Bed
#define FAN_PIN P1_18 // (4) IO pin. Buffer needed
#else // Non-specific are "EFB" (i.e., "EFBF" or "EFBE")
#define FAN_PIN RAMPS_D9_PIN
#endif
#endif
//

View file

@ -85,8 +85,9 @@
#undef HEATER_BED_PIN
#define HEATER_BED_PIN 10
#undef FAN_PIN
#define FAN_PIN 8 // Same as RAMPS_13_EEF
#ifndef FAN_PIN
#define FAN_PIN 8 // Same as RAMPS_13_EEF
#endif
//
// Misc. Functions

View file

@ -124,7 +124,9 @@
#define HEATER_3_PIN 8
#define HEATER_BED_PIN 9
#define FAN_PIN 7
#ifndef FAN_PIN
#define FAN_PIN 7
#endif
#define FAN1_PIN 8
//

View file

@ -122,7 +122,9 @@
#define HEATER_2_PIN 11
#define HEATER_BED_PIN 7 // BED H1
#define FAN_PIN 9
#ifndef FAN_PIN
#define FAN_PIN 9
#endif
#define FAN1_PIN 8
#define CONTROLLER_FAN_PIN -1

View file

@ -100,7 +100,7 @@
#define Z_ENABLE_PIN 26
#define E0_ENABLE_PIN 14
#if ENABLED(LCD_I2C_PANELOLU2)
#if !defined(FAN_PIN) && ENABLED(LCD_I2C_PANELOLU2)
#define FAN_PIN 4 // Uses Transistor1 (PWM) on Panelolu2's Sanguino Adapter Board to drive the fan
#endif
@ -114,7 +114,7 @@
#endif
#if MB(AZTEEG_X1) || MB(STB_11) || ENABLED(IS_MELZI)
#if !defined(FAN_PIN) && (MB(AZTEEG_X1) || MB(STB_11) || ENABLED(IS_MELZI))
#define FAN_PIN 4 // Works for Panelolu2 too
#endif

View file

@ -114,7 +114,9 @@
#define HEATER_0_PIN 15 // C5 PWM3B - Extruder
#define HEATER_BED_PIN 14 // C4 PWM3C - Bed
#define FAN_PIN 16 // C6 PWM3A
#ifndef FAN_PIN
#define FAN_PIN 16 // C6 PWM3A
#endif
//
// Misc. Functions

View file

@ -106,7 +106,9 @@
#define HEATER_1_PIN 7
#define HEATER_BED_PIN 3
#define FAN_PIN 8
#ifndef FAN_PIN
#define FAN_PIN 8
#endif
#define FAN1_PIN 6
#define FAN2_PIN 2

View file

@ -86,7 +86,9 @@
#define HEATER_BED2_PIN P2_04
#define HEATER_0_PIN P2_07
#define HEATER_1_PIN P2_06
#define FAN_PIN P1_24
#ifndef FAN_PIN
#define FAN_PIN P1_24
#endif
#define FAN1_PIN P1_26
//

View file

@ -98,12 +98,13 @@
#define HEATER_0_PIN 4
#define HEATER_BED_PIN 3
#if GEN7_VERSION >= 13
#ifndef FAN_PIN
#if GEN7_VERSION >= 13
// Gen7 v1.3 removed the fan pin
#define FAN_PIN -1
#else
#else
#define FAN_PIN 31
#endif
#endif
//

View file

@ -56,7 +56,9 @@
#define FIL_RUNOUT_PIN 34 // X_MAX unless overridden
#endif
#define FAN_PIN 5
#ifndef FAN_PIN
#define FAN_PIN 5
#endif
#define HEATER_0_PIN 7

View file

@ -34,34 +34,30 @@
// Ignore temp readings during develpment.
#define BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE
//
// Limit Switches
//
#define U_MIN_PIN -1
#define V_MIN_PIN -1
#define W_MIN_PIN -1
#define X_STOP_PIN PB3
#define Y_STOP_PIN PB4
#define Z_STOP_PIN PB5
//
// Steppers
//
#define X_STEP_PIN PC0
#define X_DIR_PIN PC1
#define X_ENABLE_PIN PA8
#define X_MIN_PIN PB3
#define X_MAX_PIN -1
#define Y_STEP_PIN PC2
#define Y_DIR_PIN PC3
#define Y_ENABLE_PIN PA8
#define Y_MIN_PIN -1
#define Y_MAX_PIN PB4
#define Z_STEP_PIN PC4
#define Z_DIR_PIN PC5
#define Z_ENABLE_PIN PA8
#define Z_MIN_PIN -1
#define Z_MAX_PIN PB5
#define Y2_STEP_PIN -1
#define Y2_DIR_PIN -1
#define Y2_ENABLE_PIN -1
#define Z2_STEP_PIN -1
#define Z2_DIR_PIN -1
#define Z2_ENABLE_PIN -1
#define E0_STEP_PIN PC6
#define E0_DIR_PIN PC7
@ -82,25 +78,16 @@
//
// Misc. Functions
//
#define SDPOWER -1
#define SDSS PA4
#define LED_PIN PD2
#define PS_ON_PIN -1
#define KILL_PIN -1
//
// Heaters / Fans
//
#define HEATER_0_PIN PB0 // EXTRUDER 1
#define HEATER_1_PIN PB1
#define HEATER_2_PIN -1
#define HEATER_BED_PIN PA3 // BED
#define HEATER_BED2_PIN -1 // BED2
#define HEATER_BED3_PIN -1 // BED3
#define FAN_PIN -1 // (Sprinter config)
//
// Temperature Sensors
@ -108,7 +95,6 @@
#define TEMP_BED_PIN PA0 // ANALOG NUMBERING
#define TEMP_0_PIN PA1 // ANALOG NUMBERING
#define TEMP_1_PIN PA2 // ANALOG NUMBERING
#define TEMP_2_PIN -1 // ANALOG NUMBERING
//
// LCD Pins
@ -276,7 +262,3 @@
#endif // NEWPANEL
#endif // ULTRA_LCD
#define U_MIN_PIN -1
#define V_MIN_PIN -1
#define W_MIN_PIN -1

View file

@ -115,7 +115,9 @@
#define HEATER_1_PIN PA2
#define HEATER_BED_PIN PA0
#define FAN_PIN PC6
#ifndef FAN_PIN
#define FAN_PIN PC6
#endif
#define FAN1_PIN PC7
#define FAN2_PIN PC8

View file

@ -37,34 +37,30 @@
// Ignore temp readings during develpment.
#define BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE
//
// Limit Switches
//
#define U_MIN_PIN -1
#define V_MIN_PIN -1
#define W_MIN_PIN -1
#define X_STOP_PIN PD0
#define Y_STOP_PIN PD1
#define Z_STOP_PIN PD4
//
// Steppers
//
#define X_STEP_PIN PE1
#define X_DIR_PIN PE0
#define X_ENABLE_PIN PC0
#define X_MIN_PIN PD0
#define X_MAX_PIN -1
#define Y_STEP_PIN PE3
#define Y_DIR_PIN PE2
#define Y_ENABLE_PIN PC1
#define Y_MIN_PIN PD1
#define Y_MAX_PIN
#define Z_STEP_PIN PE5
#define Z_DIR_PIN PE4
#define Z_ENABLE_PIN PC2
#define Z_MIN_PIN PD4
#define Z_MAX_PIN -1
#define Y2_STEP_PIN -1
#define Y2_DIR_PIN -1
#define Y2_ENABLE_PIN -1
#define Z2_STEP_PIN -1
#define Z2_DIR_PIN -1
#define Z2_ENABLE_PIN -1
#define E0_STEP_PIN PE7
#define E0_DIR_PIN PE6
@ -81,25 +77,22 @@
//
// Misc. Functions
//
//#define SDPOWER -1
#define SDSS PA15
#define LED_PIN PB2
//#define PS_ON_PIN -1
//#define KILL_PIN -1
//
// Heaters / Fans
//
#define HEATER_0_PIN PD12 // EXTRUDER 1
//#define HEATER_1_PIN PD13
//#define HEATER_2_PIN -1
#define HEATER_BED_PIN PB9 // BED
//#define HEATER_BED2_PIN -1 // BED2
//#define HEATER_BED3_PIN -1 // BED3
#define FAN_PIN PD14
#ifndef FAN_PIN
#define FAN_PIN PD14
#endif
#define FAN1_PIN PD13
#define FAN_SOFT_PWM
@ -114,8 +107,8 @@
// Laser control
#if ENABLED(SPINDLE_LASER_ENABLE)
#define SPINDLE_LASER_PWM_PIN PB8
#define SPINDLE_LASER_ENABLE_PIN PD5
#define SPINDLE_LASER_PWM_PIN PB8
#define SPINDLE_LASER_ENABLE_PIN PD5
#endif
//
@ -285,7 +278,3 @@
#endif // NEWPANEL
#endif // ULTRA_LCD
#define U_MIN_PIN -1
#define V_MIN_PIN -1
#define W_MIN_PIN -1

View file

@ -149,7 +149,9 @@
//
#define HEATER_0_PIN 15 // C5 PWM3B Extruder
#define HEATER_BED_PIN 14 // C4 PWM3C
#define FAN_PIN 16 // C6 PWM3A Fan
#ifndef FAN_PIN
#define FAN_PIN 16 // C6 PWM3A Fan
#endif
//
// Misc. Functions

View file

@ -79,6 +79,16 @@ D8 HEATER_BED_PIN CS1 RX4 A12 31 | 46 * * 47 | 34 A15 PWM
*/
//
// Limit Switches
//
#define X_STOP_PIN 24
#define Y_STOP_PIN 26
#define Z_STOP_PIN 28
//
// Steppers
//
#define X_STEP_PIN 22
#define X_DIR_PIN 21
#define X_ENABLE_PIN 39
@ -102,11 +112,9 @@ D8 HEATER_BED_PIN CS1 RX4 A12 31 | 46 * * 47 | 34 A15 PWM
#define HEATER_0_PIN 30
#define HEATER_1_PIN 36
#define HEATER_BED_PIN 31
#define FAN_PIN 2
#define X_STOP_PIN 24
#define Y_STOP_PIN 26
#define Z_STOP_PIN 28
#ifndef FAN_PIN
#define FAN_PIN 2
#endif
#define TEMP_0_PIN 2 // Extruder / Analog pin numbering: 2 => A2
#define TEMP_1_PIN 0

View file

@ -127,7 +127,9 @@
#define HEATER_0_PIN 15 // C5 PWM3B - Extruder
#define HEATER_BED_PIN 14 // C4 PWM3C
#define FAN_PIN 16 // C6 PWM3A
#ifndef FAN_PIN
#define FAN_PIN 16 // C6 PWM3A
#endif
//
// Misc. Functions

View file

@ -125,7 +125,9 @@
#define HEATER_1_PIN PD14
#define HEATER_BED_PIN PF6
#define FAN_PIN PD13
#ifndef FAN_PIN
#define FAN_PIN PD13
#endif
#define FAN1_PIN PA0
#define FAN2_PIN PA1

View file

@ -93,7 +93,9 @@
#define HEATER_1_PIN 3
#define HEATER_BED_PIN 4
#define FAN_PIN 7
#ifndef FAN_PIN
#define FAN_PIN 7
#endif
//
// Misc. Functions

View file

@ -99,7 +99,9 @@
#define HEATER_1_PIN 3
#define HEATER_BED_PIN 4
#define FAN_PIN 7
#ifndef FAN_PIN
#define FAN_PIN 7
#endif
//
// Misc. Functions

View file

@ -100,7 +100,9 @@
#define HEATER_3_PIN 9
#define HEATER_BED_PIN 2
#define FAN_PIN 6
#ifndef FAN_PIN
#define FAN_PIN 6
#endif
#define FAN2_PIN 5
//