Update LEVEL_BED_CORNERS config option

Marlin/Configuration.h

@@ -956,9 +956,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/src/config/default/Configuration.h

@@ -956,9 +956,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h

@@ -976,9 +976,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/src/config/examples/AliExpress/CL-260/Configuration.h

@@ -956,9 +956,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/src/config/examples/Anet/A6/Configuration.h

@@ -1099,9 +1099,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/src/config/examples/Anet/A8/Configuration.h

@@ -962,9 +962,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/src/config/examples/BQ/Hephestos/Configuration.h

@@ -947,9 +947,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h

@@ -957,9 +957,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/src/config/examples/BQ/WITBOX/Configuration.h

@@ -947,9 +947,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/src/config/examples/Cartesio/Configuration.h

@@ -955,9 +955,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/src/config/examples/Creality/CR-10/Configuration.h

@@ -966,9 +966,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/src/config/examples/Felix/Configuration.h

@@ -938,9 +938,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/src/config/examples/Felix/DUAL/Configuration.h

@@ -938,9 +938,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/src/config/examples/Folger Tech/i3-2020/Configuration.h

@@ -961,9 +961,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/src/config/examples/Geeetech/GT2560/Configuration.h

@@ -971,9 +971,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h

@@ -956,9 +956,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/src/config/examples/Infitary/i3-M508/Configuration.h

@@ -960,9 +960,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/src/config/examples/Malyan/M150/Configuration.h

@@ -984,9 +984,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h

@@ -956,9 +956,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/src/config/examples/RigidBot/Configuration.h

@@ -954,9 +954,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/src/config/examples/SCARA/Configuration.h

@@ -968,9 +968,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/src/config/examples/Sanguinololu/Configuration.h

@@ -987,9 +987,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/src/config/examples/TinyBoy2/Configuration.h

@@ -1012,9 +1012,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/src/config/examples/Velleman/K8200/Configuration.h

@@ -985,9 +985,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/src/config/examples/Velleman/K8400/Configuration.h

@@ -956,9 +956,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h

@@ -956,9 +956,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/src/config/examples/adafruit/ST7565/Configuration.h

@@ -956,9 +956,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h

@@ -1084,9 +1084,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h

@@ -1078,9 +1078,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/src/config/examples/delta/generic/Configuration.h

@@ -1073,9 +1073,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/src/config/examples/delta/kossel_mini/Configuration.h

@@ -1076,9 +1076,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/src/config/examples/delta/kossel_pro/Configuration.h

@@ -1076,9 +1076,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/src/config/examples/delta/kossel_xl/Configuration.h

@@ -1085,9 +1085,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h

@@ -970,9 +970,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/src/config/examples/makibox/Configuration.h

@@ -959,9 +959,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/src/config/examples/tvrrug/Round2/Configuration.h

@@ -951,9 +951,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.

Marlin/src/config/examples/wt150/Configuration.h

@@ -961,9 +961,11 @@
 #if ENABLED(LCD_BED_LEVELING)
   #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define LEVEL_BED_CORNERS   // Add an option to move between corners
 #endif
 
+// Add a menu item to move between bed corners for manual bed adjustment
+#define LEVEL_BED_CORNERS
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.