SunRed/Marlin-Artillery-M600
Archived
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity

Merge pull request #1 from ErikZalm/Marlin_v1

Browse source 
merge
This commit is contained in:
midopple 2013-07-27 08:06:44 -07:00
commit 7ced55b97c
38 changed files with 6751 additions and 2651 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

2
ArduinoAddons/Arduino_0.xx/Gen6/bootloaders/atmega644p/ATmegaBOOT.c
View file

@ -168,7 +168,7 @@ int main(void)
WDTCSR = 0; WDTCSR = 0;
// Check if the WDT was used to reset, in which case we dont bootload and skip straight to the code. woot. // Check if the WDT was used to reset, in which case we dont bootload and skip straight to the code. woot.
if (! (ch & _BV(EXTRF))) // if its a not an external reset... if (! (ch & _BV(EXTRF))) // if it's a not an external reset...
app_start(); // skip bootloader app_start(); // skip bootloader
#endif #endif

2
ArduinoAddons/Arduino_0.xx/Sanguino/bootloaders/atmega644p/ATmegaBOOT.c
View file

@ -168,7 +168,7 @@ int main(void)
WDTCSR = 0; WDTCSR = 0;
// Check if the WDT was used to reset, in which case we dont bootload and skip straight to the code. woot. // Check if the WDT was used to reset, in which case we dont bootload and skip straight to the code. woot.
if (! (ch & _BV(EXTRF))) // if its a not an external reset... if (! (ch & _BV(EXTRF))) // if it's a not an external reset...
app_start(); // skip bootloader app_start(); // skip bootloader
#endif #endif

2
ArduinoAddons/Arduino_0.xx/libraries/LiquidCrystal/LiquidCrystal.cpp
View file

@ -21,7 +21,7 @@
// S = 0; No shift // S = 0; No shift
// //
// Note, however, that resetting the Arduino doesn't reset the LCD, so we // Note, however, that resetting the Arduino doesn't reset the LCD, so we
// can't assume that its in that state when a sketch starts (and the // can't assume that it's in that state when a sketch starts (and the
// LiquidCrystal constructor is called). // LiquidCrystal constructor is called).
LiquidCrystal::LiquidCrystal(uint8_t rs, uint8_t rw, uint8_t enable, LiquidCrystal::LiquidCrystal(uint8_t rs, uint8_t rw, uint8_t enable,

2
ArduinoAddons/Arduino_0.xx/libraries/U8glib/utility/chessengine.c
View file

@ -72,7 +72,7 @@
- Castling: Need to check for fields under attack - Castling: Need to check for fields under attack
--> done --> done
- Check for WIN / LOOSE situation, perhaps call ce_Eval() once on the top-level board setup - Check for WIN / LOSE situation, perhaps call ce_Eval() once on the top-level board setup
just after the real move just after the real move
- cleanup cu_Move - cleanup cu_Move
--> almost done --> almost done

2
ArduinoAddons/Arduino_1.x.x/libraries/LiquidCrystal/LiquidCrystal.cpp
View file

@ -21,7 +21,7 @@
// S = 0; No shift // S = 0; No shift
// //
// Note, however, that resetting the Arduino doesn't reset the LCD, so we // Note, however, that resetting the Arduino doesn't reset the LCD, so we
// can't assume that its in that state when a sketch starts (and the // can't assume that it's in that state when a sketch starts (and the
// LiquidCrystal constructor is called). // LiquidCrystal constructor is called).
LiquidCrystal::LiquidCrystal(uint8_t rs, uint8_t rw, uint8_t enable, LiquidCrystal::LiquidCrystal(uint8_t rs, uint8_t rw, uint8_t enable,

2
ArduinoAddons/Arduino_1.x.x/libraries/U8glib/utility/chessengine.c
View file

@ -72,7 +72,7 @@
- Castling: Need to check for fields under attack - Castling: Need to check for fields under attack
--> done --> done
- Check for WIN / LOOSE situation, perhaps call ce_Eval() once on the top-level board setup - Check for WIN / LOSE situation, perhaps call ce_Eval() once on the top-level board setup
just after the real move just after the real move
- cleanup cu_Move - cleanup cu_Move
--> almost done --> almost done

2
ArduinoAddons/Arduino_1.x.x/sanguino/bootloaders/atmega/ATmegaBOOT_168.c
View file

@ -301,7 +301,7 @@ int main(void)
WDTCSR = 0; WDTCSR = 0;
// Check if the WDT was used to reset, in which case we dont bootload and skip straight to the code. woot. // Check if the WDT was used to reset, in which case we dont bootload and skip straight to the code. woot.
if (! (ch & _BV(EXTRF))) // if its a not an external reset... if (! (ch & _BV(EXTRF))) // if it's a not an external reset...
app_start(); // skip bootloader app_start(); // skip bootloader
#else #else
asm volatile("nop\n\t"); asm volatile("nop\n\t");

2
ArduinoAddons/Arduino_1.x.x/sanguino/bootloaders/atmega644p/ATmegaBOOT.c
View file

@ -172,7 +172,7 @@ int main(void)
WDTCSR = 0; WDTCSR = 0;
// Check if the WDT was used to reset, in which case we dont bootload and skip straight to the code. woot. // Check if the WDT was used to reset, in which case we dont bootload and skip straight to the code. woot.
if (! (ch & _BV(EXTRF))) // if its a not an external reset... if (! (ch & _BV(EXTRF))) // if it's a not an external reset...
app_start(); // skip bootloader app_start(); // skip bootloader
#endif #endif

2
ArduinoAddons/Arduino_1.x.x/sanguino/bootloaders/atmega644p/ATmegaBOOT.c.tst
View file

@ -172,7 +172,7 @@ int main(void)
WDTCSR = 0; WDTCSR = 0;
// Check if the WDT was used to reset, in which case we dont bootload and skip straight to the code. woot. // Check if the WDT was used to reset, in which case we dont bootload and skip straight to the code. woot.
if (! (ch & _BV(EXTRF))) // if its a not an external reset... if (! (ch & _BV(EXTRF))) // if it's a not an external reset...
app_start(); // skip bootloader app_start(); // skip bootloader
#endif #endif

325
Marlin/Configuration.h
View file

@ -1,15 +1,15 @@
#ifndef CONFIGURATION_H #ifndef CONFIGURATION_H
#define CONFIGURATION_H #define CONFIGURATION_H
// This configurtion file contains the basic settings. // This configuration file contains the basic settings.
// Advanced settings can be found in Configuration_adv.h // Advanced settings can be found in Configuration_adv.h
// BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration // BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration
//User specified version info of this build to display in [Pronterface, etc] terminal window during startup. // User-specified version info of this build to display in [Pronterface, etc] terminal window during
//Implementation of an idea by Prof Braino to inform user that any changes made // startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
//to this build by the user have been successfully uploaded into firmware. // build by the user have been successfully uploaded into firmware.
#define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time #define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time
#define STRING_CONFIG_H_AUTHOR "(none, default config)" //Who made the changes. #define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
// SERIAL_PORT selects which serial port should be used for communication with the host. // SERIAL_PORT selects which serial port should be used for communication with the host.
// This allows the connection of wireless adapters (for instance) to non-default port pins. // This allows the connection of wireless adapters (for instance) to non-default port pins.
@ -26,8 +26,9 @@
// 12 = Gen7 v1.3 // 12 = Gen7 v1.3
// 13 = Gen7 v1.4 // 13 = Gen7 v1.4
// 3 = MEGA/RAMPS up to 1.2 = 3 // 3 = MEGA/RAMPS up to 1.2 = 3
// 33 = RAMPS 1.3 / 1.4 (Power outputs: Extruder, Bed, Fan) // 33 = RAMPS 1.3 / 1.4 (Power outputs: Extruder, Fan, Bed)
// 34 = RAMPS 1.3 / 1.4 (Power outputs: Extruder0, Extruder1, Bed) // 34 = RAMPS 1.3 / 1.4 (Power outputs: Extruder0, Extruder1, Bed)
// 35 = RAMPS 1.3 / 1.4 (Power outputs: Extruder, Fan, Fan)
// 4 = Duemilanove w/ ATMega328P pin assignment // 4 = Duemilanove w/ ATMega328P pin assignment
// 5 = Gen6 // 5 = Gen6
// 51 = Gen6 deluxe // 51 = Gen6 deluxe
@ -35,28 +36,77 @@
// 62 = Sanguinololu 1.2 and above // 62 = Sanguinololu 1.2 and above
// 63 = Melzi // 63 = Melzi
// 64 = STB V1.1 // 64 = STB V1.1
// 65 = Azteeg X1
// 66 = Melzi with ATmega1284 (MaKr3d version)
// 7 = Ultimaker // 7 = Ultimaker
// 71 = Ultimaker (Older electronics. Pre 1.5.4. This is rare) // 71 = Ultimaker (Older electronics. Pre 1.5.4. This is rare)
// 77 = 3Drag Controller
// 8 = Teensylu // 8 = Teensylu
// 80 = Rumba // 80 = Rumba
// 81 = Printrboard (AT90USB1286) // 81 = Printrboard (AT90USB1286)
// 82 = Brainwave (AT90USB646) // 82 = Brainwave (AT90USB646)
// 9 = Gen3+ // 9 = Gen3+
// 70 = Megatronics // 70 = Megatronics
// 701= Megatronics v2.0
// 702= Minitronics v1.0
// 90 = Alpha OMCA board // 90 = Alpha OMCA board
// 91 = Final OMCA board // 91 = Final OMCA board
// 301 = Rambo // 301 = Rambo
// 21 = Elefu Ra Board (v3)
#ifndef MOTHERBOARD #ifndef MOTHERBOARD
#define MOTHERBOARD 7 #define MOTHERBOARD 7
#endif #endif
// Define this to set a custom name for your generic Mendel,
// #define CUSTOM_MENDEL_NAME "This Mendel"
// This defines the number of extruders
#define EXTRUDERS 1
//// The following define selects which power supply you have. Please choose the one that matches your setup //// The following define selects which power supply you have. Please choose the one that matches your setup
// 1 = ATX // 1 = ATX
// 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) // 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
#define POWER_SUPPLY 1 #define POWER_SUPPLY 1
//===========================================================================
//============================== Delta Settings =============================
//===========================================================================
// Enable DELTA kinematics
//#define DELTA
// Make delta curves from many straight lines (linear interpolation).
// This is a trade-off between visible corners (not enough segments)
// and processor overload (too many expensive sqrt calls).
#define DELTA_SEGMENTS_PER_SECOND 200
// Center-to-center distance of the holes in the diagonal push rods.
#define DELTA_DIAGONAL_ROD 250.0 // mm
// Horizontal offset from middle of printer to smooth rod center.
#define DELTA_SMOOTH_ROD_OFFSET 175.0 // mm
// Horizontal offset of the universal joints on the end effector.
#define DELTA_EFFECTOR_OFFSET 33.0 // mm
// Horizontal offset of the universal joints on the carriages.
#define DELTA_CARRIAGE_OFFSET 18.0 // mm
// Effective horizontal distance bridged by diagonal push rods.
#define DELTA_RADIUS (DELTA_SMOOTH_ROD_OFFSET-DELTA_EFFECTOR_OFFSET-DELTA_CARRIAGE_OFFSET)
// Effective X/Y positions of the three vertical towers.
#define SIN_60 0.8660254037844386
#define COS_60 0.5
#define DELTA_TOWER1_X -SIN_60*DELTA_RADIUS // front left tower
#define DELTA_TOWER1_Y -COS_60*DELTA_RADIUS
#define DELTA_TOWER2_X SIN_60*DELTA_RADIUS // front right tower
#define DELTA_TOWER2_Y -COS_60*DELTA_RADIUS
#define DELTA_TOWER3_X 0.0 // back middle tower
#define DELTA_TOWER3_Y DELTA_RADIUS
//=========================================================================== //===========================================================================
//=============================Thermal Settings ============================ //=============================Thermal Settings ============================
//=========================================================================== //===========================================================================
@ -77,25 +127,30 @@
// 8 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) // 8 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
// 9 is 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) // 9 is 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
// 10 is 100k RS thermistor 198-961 (4.7k pullup) // 10 is 100k RS thermistor 198-961 (4.7k pullup)
// 60 is 100k Maker's Tool Works Kapton Bed Thermister
// //
// 1k ohm pullup tables - This is not normal, you would have to have changed out your 4.7k for 1k // 1k ohm pullup tables - This is not normal, you would have to have changed out your 4.7k for 1k
// (but gives greater accuracy and more stable PID) // (but gives greater accuracy and more stable PID)
// 51 is 100k thermistor - EPCOS (1k pullup) // 51 is 100k thermistor - EPCOS (1k pullup)
// 52 is 200k thermistor - ATC Semitec 204GT-2 (1k pullup) // 52 is 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
// 55 is 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan) (1k pullup) // 55 is 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan) (1k pullup)
#define TEMP_SENSOR_0 -1 #define TEMP_SENSOR_0 -1
#define TEMP_SENSOR_1 0 #define TEMP_SENSOR_1 -1
#define TEMP_SENSOR_2 0 #define TEMP_SENSOR_2 0
#define TEMP_SENSOR_BED 0 #define TEMP_SENSOR_BED 0
// This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted.
//#define TEMP_SENSOR_1_AS_REDUNDANT
#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
// Actual temperature must be close to target for this long before M109 returns success // Actual temperature must be close to target for this long before M109 returns success
#define TEMP_RESIDENCY_TIME 10 // (seconds) #define TEMP_RESIDENCY_TIME 10 // (seconds)
#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one #define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one
#define TEMP_WINDOW 1 // (degC) Window around target to start the recidency timer x degC early. #define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early.
// The minimal temperature defines the temperature below which the heater will not be enabled It is used // The minimal temperature defines the temperature below which the heater will not be enabled It is used
// to check that the wiring to the thermistor is not broken. // to check that the wiring to the thermistor is not broken.
// Otherwise this would lead to the heater being powered on all the time. // Otherwise this would lead to the heater being powered on all the time.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
#define HEATER_1_MINTEMP 5 #define HEATER_1_MINTEMP 5
@ -118,57 +173,57 @@
// PID settings: // PID settings:
// Comment the following line to disable PID and enable bang-bang. // Comment the following line to disable PID and enable bang-bang.
#define PIDTEMP #define PIDTEMP
#define BANG_MAX 256 // limits current to nozzle while in bang-bang mode; 256=full current #define BANG_MAX 255 // limits current to nozzle while in bang-bang mode; 255=full current
#define PID_MAX 256 // limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 256=full current #define PID_MAX 255 // limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current
#ifdef PIDTEMP #ifdef PIDTEMP
//#define PID_DEBUG // Sends debug data to the serial port. //#define PID_DEBUG // Sends debug data to the serial port.
//#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
#define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
// is more then PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. // is more then PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
#define PID_INTEGRAL_DRIVE_MAX 255 //limit for the integral term #define PID_INTEGRAL_DRIVE_MAX 255 //limit for the integral term
#define K1 0.95 //smoothing factor withing the PID #define K1 0.95 //smoothing factor within the PID
#define PID_dT ((16.0 * 8.0)/(F_CPU / 64.0 / 256.0)) //sampling period of the temperature routine #define PID_dT ((16.0 * 8.0)/(F_CPU / 64.0 / 256.0)) //sampling period of the temperature routine
// If you are using a preconfigured hotend then you can use one of the value sets by uncommenting it // If you are using a preconfigured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
#define DEFAULT_Kp 22.2 #define DEFAULT_Kp 22.2
#define DEFAULT_Ki 1.08 #define DEFAULT_Ki 1.08
#define DEFAULT_Kd 114 #define DEFAULT_Kd 114
// Makergear // Makergear
// #define DEFAULT_Kp 7.0 // #define DEFAULT_Kp 7.0
// #define DEFAULT_Ki 0.1 // #define DEFAULT_Ki 0.1
// #define DEFAULT_Kd 12 // #define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
// #define DEFAULT_Kp 63.0 // #define DEFAULT_Kp 63.0
// #define DEFAULT_Ki 2.25 // #define DEFAULT_Ki 2.25
// #define DEFAULT_Kd 440 // #define DEFAULT_Kd 440
#endif // PIDTEMP #endif // PIDTEMP
// Bed Temperature Control // Bed Temperature Control
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis // Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
// //
// uncomment this to enable PID on the bed. It uses the same ferquency PWM as the extruder. // Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder.
// If your PID_dT above is the default, and correct for your hardware/configuration, that means 7.689Hz, // If your PID_dT above is the default, and correct for your hardware/configuration, that means 7.689Hz,
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating. // which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater. // This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater.
// If your configuration is significantly different than this and you don't understand the issues involved, you proabaly // If your configuration is significantly different than this and you don't understand the issues involved, you probably
// shouldn't use bed PID until someone else verifies your hardware works. // shouldn't use bed PID until someone else verifies your hardware works.
// If this is enabled, find your own PID constants below. // If this is enabled, find your own PID constants below.
//#define PIDTEMPBED //#define PIDTEMPBED
// //
//#define BED_LIMIT_SWITCHING //#define BED_LIMIT_SWITCHING
// This sets the max power delived to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option. // This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option.
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis) // all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis)
// setting this to anything other than 256 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did, // setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did,
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED) // so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED)
#define MAX_BED_POWER 256 // limits duty cycle to bed; 256=full current #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#ifdef PIDTEMPBED #ifdef PIDTEMPBED
//120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, argressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
#define DEFAULT_bedKp 10.00 #define DEFAULT_bedKp 10.00
#define DEFAULT_bedKi .023 #define DEFAULT_bedKi .023
#define DEFAULT_bedKd 305.4 #define DEFAULT_bedKd 305.4
@ -200,17 +255,17 @@
// Uncomment the following line to enable CoreXY kinematics // Uncomment the following line to enable CoreXY kinematics
// #define COREXY // #define COREXY
// corse Endstop Settings // coarse Endstop Settings
#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors #define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors
#ifndef ENDSTOPPULLUPS #ifndef ENDSTOPPULLUPS
// fine Enstop settings: Individual Pullups. will be ignord if ENDSTOPPULLUPS is defined // fine Enstop settings: Individual Pullups. will be ignored if ENDSTOPPULLUPS is defined
#define ENDSTOPPULLUP_XMAX // #define ENDSTOPPULLUP_XMAX
#define ENDSTOPPULLUP_YMAX // #define ENDSTOPPULLUP_YMAX
#define ENDSTOPPULLUP_ZMAX // #define ENDSTOPPULLUP_ZMAX
#define ENDSTOPPULLUP_XMIN // #define ENDSTOPPULLUP_XMIN
#define ENDSTOPPULLUP_YMIN // #define ENDSTOPPULLUP_YMIN
//#define ENDSTOPPULLUP_ZMIN // #define ENDSTOPPULLUP_ZMIN
#endif #endif
#ifdef ENDSTOPPULLUPS #ifdef ENDSTOPPULLUPS
@ -223,10 +278,16 @@
#endif #endif
// The pullups are needed if you directly connect a mechanical endswitch between the signal and ground pins. // The pullups are needed if you directly connect a mechanical endswitch between the signal and ground pins.
const bool X_ENDSTOPS_INVERTING = true; // set to true to invert the logic of the endstops. const bool X_ENDSTOPS_INVERTING = true; // set to true to invert the logic of the endstops.
const bool Y_ENDSTOPS_INVERTING = true; // set to true to invert the logic of the endstops. const bool Y_ENDSTOPS_INVERTING = true; // set to true to invert the logic of the endstops.
const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of the endstops. const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of the endstops.
//#define DISABLE_MAX_ENDSTOPS //#define DISABLE_MAX_ENDSTOPS
//#define DISABLE_MIN_ENDSTOPS
// Disable max endstops for compatibility with endstop checking routine
#if defined(COREXY) && !defined(DISABLE_MAX_ENDSTOPS)
#define DISABLE_MAX_ENDSTOPS
#endif
// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
#define X_ENABLE_ON 0 #define X_ENABLE_ON 0
@ -253,8 +314,8 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th
#define Y_HOME_DIR -1 #define Y_HOME_DIR -1
#define Z_HOME_DIR -1 #define Z_HOME_DIR -1
#define min_software_endstops true //If true, axis won't move to coordinates less than HOME_POS. #define min_software_endstops true // If true, axis won't move to coordinates less than HOME_POS.
#define max_software_endstops true //If true, axis won't move to coordinates greater than the defined lengths below. #define max_software_endstops true // If true, axis won't move to coordinates greater than the defined lengths below.
// Travel limits after homing // Travel limits after homing
#define X_MAX_POS 205 #define X_MAX_POS 205
#define X_MIN_POS 0 #define X_MIN_POS 0
@ -272,22 +333,24 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th
//#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0) //#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0)
//Manual homing switch locations: //Manual homing switch locations:
// For deltabots this means top and center of the cartesian print volume.
#define MANUAL_X_HOME_POS 0 #define MANUAL_X_HOME_POS 0
#define MANUAL_Y_HOME_POS 0 #define MANUAL_Y_HOME_POS 0
#define MANUAL_Z_HOME_POS 0 #define MANUAL_Z_HOME_POS 0
//#define MANUAL_Z_HOME_POS 402 // For delta: Distance between nozzle and print surface after homing.
//// MOVEMENT SETTINGS //// MOVEMENT SETTINGS
#define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E #define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E
#define HOMING_FEEDRATE {50*60, 50*60, 4*60, 0} // set the homing speeds (mm/min) #define HOMING_FEEDRATE {50*60, 50*60, 4*60, 0} // set the homing speeds (mm/min)
// default settings // default settings
#define DEFAULT_AXIS_STEPS_PER_UNIT {78.7402,78.7402,200.0*8/3,760*1.1} // default steps per unit for ultimaker #define DEFAULT_AXIS_STEPS_PER_UNIT {78.7402,78.7402,200.0*8/3,760*1.1} // default steps per unit for Ultimaker
#define DEFAULT_MAX_FEEDRATE {500, 500, 5, 25} // (mm/sec) #define DEFAULT_MAX_FEEDRATE {500, 500, 5, 25} // (mm/sec)
#define DEFAULT_MAX_ACCELERATION {9000,9000,100,10000} // X, Y, Z, E maximum start speed for accelerated moves. E default values are good for skeinforge 40+, for older versions raise them a lot. #define DEFAULT_MAX_ACCELERATION {9000,9000,100,10000} // X, Y, Z, E maximum start speed for accelerated moves. E default values are good for skeinforge 40+, for older versions raise them a lot.
#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E max acceleration in mm/s^2 for printing moves #define DEFAULT_ACCELERATION 3000 // X, Y, Z and E max acceleration in mm/s^2 for printing moves
#define DEFAULT_RETRACT_ACCELERATION 3000 // X, Y, Z and E max acceleration in mm/s^2 for r retracts #define DEFAULT_RETRACT_ACCELERATION 3000 // X, Y, Z and E max acceleration in mm/s^2 for retracts
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
@ -295,7 +358,7 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th
// #define EXTRUDER_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis // #define EXTRUDER_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis
// #define EXTRUDER_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis // #define EXTRUDER_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis
// The speed change that does not require acceleration (i.e. the software might assume it can be done instanteneously) // The speed change that does not require acceleration (i.e. the software might assume it can be done instantaneously)
#define DEFAULT_XYJERK 20.0 // (mm/sec) #define DEFAULT_XYJERK 20.0 // (mm/sec)
#define DEFAULT_ZJERK 0.4 // (mm/sec) #define DEFAULT_ZJERK 0.4 // (mm/sec)
#define DEFAULT_EJERK 5.0 // (mm/sec) #define DEFAULT_EJERK 5.0 // (mm/sec)
@ -307,7 +370,7 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th
// EEPROM // EEPROM
// the microcontroller can store settings in the EEPROM, e.g. max velocity... // the microcontroller can store settings in the EEPROM, e.g. max velocity...
// M500 - stores paramters in EEPROM // M500 - stores paramters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
//define this to enable eeprom support //define this to enable eeprom support
//#define EEPROM_SETTINGS //#define EEPROM_SETTINGS
@ -315,15 +378,28 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th
// please keep turned on if you can. // please keep turned on if you can.
//#define EEPROM_CHITCHAT //#define EEPROM_CHITCHAT
// Preheat Constants
#define PLA_PREHEAT_HOTEND_TEMP 180
#define PLA_PREHEAT_HPB_TEMP 70
#define PLA_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255
#define ABS_PREHEAT_HOTEND_TEMP 240
#define ABS_PREHEAT_HPB_TEMP 100
#define ABS_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255
//LCD and SD support //LCD and SD support
//#define ULTRA_LCD //general lcd support, also 16x2 //#define ULTRA_LCD //general lcd support, also 16x2
//#define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family) //#define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
//#define SDSUPPORT // Enable SD Card Support in Hardware Console //#define SDSUPPORT // Enable SD Card Support in Hardware Console
//#define SDSLOW // Use slower SD transfer mode (not normally needed - uncomment if you're getting volume init error) //#define SDSLOW // Use slower SD transfer mode (not normally needed - uncomment if you're getting volume init error)
//#define ULTIMAKERCONTROLLER //as available from the ultimaker online store. //#define ULTIMAKERCONTROLLER //as available from the ultimaker online store.
//#define ULTIPANEL //the ultipanel as on thingiverse //#define ULTIPANEL //the ultipanel as on thingiverse
// The MaKr3d Makr-Panel with graphic controller and SD support
// http://reprap.org/wiki/MaKr3d_MaKrPanel
//#define MAKRPANEL
// The RepRapDiscount Smart Controller (white PCB) // The RepRapDiscount Smart Controller (white PCB)
// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // http://reprap.org/wiki/RepRapDiscount_Smart_Controller
//#define REPRAP_DISCOUNT_SMART_CONTROLLER //#define REPRAP_DISCOUNT_SMART_CONTROLLER
@ -338,7 +414,25 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th
// ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib // ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib
//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER //#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
// The RepRapWorld REPRAPWORLD_KEYPAD v1.1
// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626
//#define REPRAPWORLD_KEYPAD
//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // how much should be moved when a key is pressed, eg 10.0 means 10mm per click
// The Elefu RA Board Control Panel
// http://www.elefu.com/index.php?route=product/product&product_id=53
// REMEMBER TO INSTALL LiquidCrystal_I2C.h in your ARUDINO library folder: https://github.com/kiyoshigawa/LiquidCrystal_I2C
//#define RA_CONTROL_PANEL
//automatic expansion //automatic expansion
#if defined (MAKRPANEL)
#define DOGLCD
#define SDSUPPORT
#define ULTIPANEL
#define NEWPANEL
#define DEFAULT_LCD_CONTRAST 17
#endif
#if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) #if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define DOGLCD #define DOGLCD
#define U8GLIB_ST7920 #define U8GLIB_ST7920
@ -348,44 +442,104 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th
#if defined(ULTIMAKERCONTROLLER) || defined(REPRAP_DISCOUNT_SMART_CONTROLLER) || defined(G3D_PANEL) #if defined(ULTIMAKERCONTROLLER) || defined(REPRAP_DISCOUNT_SMART_CONTROLLER) || defined(G3D_PANEL)
#define ULTIPANEL #define ULTIPANEL
#define NEWPANEL #define NEWPANEL
#endif #endif
// Preheat Constants #if defined(REPRAPWORLD_KEYPAD)
#define PLA_PREHEAT_HOTEND_TEMP 180 #define NEWPANEL
#define PLA_PREHEAT_HPB_TEMP 70 #define ULTIPANEL
#define PLA_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 #endif
#if defined(RA_CONTROL_PANEL)
#define ULTIPANEL
#define NEWPANEL
#define LCD_I2C_TYPE_PCA8574
#define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander
#endif
#define ABS_PREHEAT_HOTEND_TEMP 240 //I2C PANELS
#define ABS_PREHEAT_HPB_TEMP 100
#define ABS_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255
//#define LCD_I2C_SAINSMART_YWROBOT
#ifdef LCD_I2C_SAINSMART_YWROBOT
// This uses the LiquidCrystal_I2C library ( https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home )
// Make sure it is placed in the Arduino libraries directory.
#define LCD_I2C_TYPE_PCF8575
#define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander
#define NEWPANEL
#define ULTIPANEL
#endif
// PANELOLU2 LCD with status LEDs, separate encoder and click inputs
//#define LCD_I2C_PANELOLU2
#ifdef LCD_I2C_PANELOLU2
// This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 )
// Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory.
// (v1.2.3 no longer requires you to define PANELOLU in the LiquidTWI2.h library header file)
// Note: The PANELOLU2 encoder click input can either be directly connected to a pin
// (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1).
#define LCD_I2C_TYPE_MCP23017
#define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander
#define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD
#define NEWPANEL
#define ULTIPANEL
#endif
// Panucatt VIKI LCD with status LEDs, integrated click & L/R/U/P buttons, separate encoder inputs
//#define LCD_I2C_VIKI
#ifdef LCD_I2C_VIKI
// This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 )
// Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory.
// Note: The pause/stop/resume LCD button pin should be connected to the Arduino
// BTN_ENC pin (or set BTN_ENC to -1 if not used)
#define LCD_I2C_TYPE_MCP23017
#define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander
#define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD (requires LiquidTWI2 v1.2.3 or later)
#define NEWPANEL
#define ULTIPANEL
#endif
#ifdef ULTIPANEL #ifdef ULTIPANEL
// #define NEWPANEL //enable this if you have a click-encoder panel // #define NEWPANEL //enable this if you have a click-encoder panel
#define SDSUPPORT #define SDSUPPORT
#define ULTRA_LCD #define ULTRA_LCD
#ifdef DOGLCD // Change number of lines to match the DOG graphic display #ifdef DOGLCD // Change number of lines to match the DOG graphic display
#define LCD_WIDTH 20 #define LCD_WIDTH 20
#define LCD_HEIGHT 5 #define LCD_HEIGHT 5
#else #else
#define LCD_WIDTH 20 #define LCD_WIDTH 20
#define LCD_HEIGHT 4 #define LCD_HEIGHT 4
#endif
#else //no panel but just lcd
#ifdef ULTRA_LCD
#ifdef DOGLCD // Change number of lines to match the 128x64 graphics display
#define LCD_WIDTH 20
#define LCD_HEIGHT 5
#else
#define LCD_WIDTH 16
#define LCD_HEIGHT 2
#endif
#endif #endif
#else //no panel but just lcd
#ifdef ULTRA_LCD
#ifdef DOGLCD // Change number of lines to match the 128x64 graphics display
#define LCD_WIDTH 20
#define LCD_HEIGHT 5
#else
#define LCD_WIDTH 16
#define LCD_HEIGHT 2
#endif
#endif
#endif
// default LCD contrast for dogm-like LCD displays
#ifdef DOGLCD
# ifndef DEFAULT_LCD_CONTRAST
# define DEFAULT_LCD_CONTRAST 32
# endif
#endif #endif
// Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino // Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino
//#define FAST_PWM_FAN //#define FAST_PWM_FAN
// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
// which is not ass annoying as with the hardware PWM. On the other hand, if this frequency
// is too low, you should also increment SOFT_PWM_SCALE.
//#define FAN_SOFT_PWM
// Incrementing this by 1 will double the software PWM frequency,
// affecting heaters, and the fan if FAN_SOFT_PWM is enabled.
// However, control resolution will be halved for each increment;
// at zero value, there are 128 effective control positions.
#define SOFT_PWM_SCALE 0
// M240 Triggers a camera by emulating a Canon RC-1 Remote // M240 Triggers a camera by emulating a Canon RC-1 Remote
// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ // Data from: http://www.doc-diy.net/photo/rc-1_hacked/
// #define PHOTOGRAPH_PIN 23 // #define PHOTOGRAPH_PIN 23
@ -393,6 +547,31 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th
// SF send wrong arc g-codes when using Arc Point as fillet procedure // SF send wrong arc g-codes when using Arc Point as fillet procedure
//#define SF_ARC_FIX //#define SF_ARC_FIX
// Support for the BariCUDA Paste Extruder.
//#define BARICUDA
/*********************************************************************\
* R/C SERVO support
* Sponsored by TrinityLabs, Reworked by codexmas
**********************************************************************/
// Number of servos
//
// If you select a configuration below, this will receive a default value and does not need to be set manually
// set it manually if you have more servos than extruders and wish to manually control some
// leaving it undefined or defining as 0 will disable the servo subsystem
// If unsure, leave commented / disabled
//
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command
// Servo Endstops
//
// This allows for servo actuated endstops, primary usage is for the Z Axis to eliminate calibration or bed height changes.
// Use M206 command to correct for switch height offset to actual nozzle height. Store that setting with M500.
//
//#define SERVO_ENDSTOPS {-1, -1, 0} // Servo index for X, Y, Z. Disable with -1
//#define SERVO_ENDSTOP_ANGLES {0,0, 0,0, 70,0} // X,Y,Z Axis Extend and Retract angles
#include "Configuration_adv.h" #include "Configuration_adv.h"
#include "thermistortables.h" #include "thermistortables.h"

13
Marlin/ConfigurationStore.cpp
View file

@ -37,7 +37,7 @@ void _EEPROM_readData(int &pos, uint8_t* value, uint8_t size)
// the default values are used whenever there is a change to the data, to prevent // the default values are used whenever there is a change to the data, to prevent
// wrong data being written to the variables. // wrong data being written to the variables.
// ALSO: always make sure the variables in the Store and retrieve sections are in the same order. // ALSO: always make sure the variables in the Store and retrieve sections are in the same order.
#define EEPROM_VERSION "V07" #define EEPROM_VERSION "V08"
#ifdef EEPROM_SETTINGS #ifdef EEPROM_SETTINGS
void Config_StoreSettings() void Config_StoreSettings()
@ -78,6 +78,10 @@ void Config_StoreSettings()
EEPROM_WRITE_VAR(i,dummy); EEPROM_WRITE_VAR(i,dummy);
EEPROM_WRITE_VAR(i,dummy); EEPROM_WRITE_VAR(i,dummy);
#endif #endif
#ifndef DOGLCD
int lcd_contrast = 32;
#endif
EEPROM_WRITE_VAR(i,lcd_contrast);
char ver2[4]=EEPROM_VERSION; char ver2[4]=EEPROM_VERSION;
i=EEPROM_OFFSET; i=EEPROM_OFFSET;
EEPROM_WRITE_VAR(i,ver2); // validate data EEPROM_WRITE_VAR(i,ver2); // validate data
@ -198,6 +202,10 @@ void Config_RetrieveSettings()
EEPROM_READ_VAR(i,Kp); EEPROM_READ_VAR(i,Kp);
EEPROM_READ_VAR(i,Ki); EEPROM_READ_VAR(i,Ki);
EEPROM_READ_VAR(i,Kd); EEPROM_READ_VAR(i,Kd);
#ifndef DOGLCD
int lcd_contrast;
#endif
EEPROM_READ_VAR(i,lcd_contrast);
// Call updatePID (similar to when we have processed M301) // Call updatePID (similar to when we have processed M301)
updatePID(); updatePID();
@ -244,6 +252,9 @@ void Config_ResetDefault()
absPreheatHPBTemp = ABS_PREHEAT_HPB_TEMP; absPreheatHPBTemp = ABS_PREHEAT_HPB_TEMP;
absPreheatFanSpeed = ABS_PREHEAT_FAN_SPEED; absPreheatFanSpeed = ABS_PREHEAT_FAN_SPEED;
#endif #endif
#ifdef DOGLCD
lcd_contrast = DEFAULT_LCD_CONTRAST;
#endif
#ifdef PIDTEMP #ifdef PIDTEMP
Kp = DEFAULT_Kp; Kp = DEFAULT_Kp;
Ki = scalePID_i(DEFAULT_Ki); Ki = scalePID_i(DEFAULT_Ki);

62
Marlin/Configuration_adv.h
View file

@ -18,12 +18,6 @@
//#define WATCH_TEMP_PERIOD 40000 //40 seconds //#define WATCH_TEMP_PERIOD 40000 //40 seconds
//#define WATCH_TEMP_INCREASE 10 //Heat up at least 10 degree in 20 seconds //#define WATCH_TEMP_INCREASE 10 //Heat up at least 10 degree in 20 seconds
// Wait for Cooldown
// This defines if the M109 call should not block if it is cooling down.
// example: From a current temp of 220, you set M109 S200.
// if CooldownNoWait is defined M109 will not wait for the cooldown to finish
#define CooldownNoWait true
#ifdef PIDTEMP #ifdef PIDTEMP
// this adds an experimental additional term to the heatingpower, proportional to the extrusion speed. // this adds an experimental additional term to the heatingpower, proportional to the extrusion speed.
// if Kc is choosen well, the additional required power due to increased melting should be compensated. // if Kc is choosen well, the additional required power due to increased melting should be compensated.
@ -63,21 +57,31 @@
//This is for controlling a fan to cool down the stepper drivers //This is for controlling a fan to cool down the stepper drivers
//it will turn on when any driver is enabled //it will turn on when any driver is enabled
//and turn off after the set amount of seconds from last driver being disabled again //and turn off after the set amount of seconds from last driver being disabled again
//#define CONTROLLERFAN_PIN 23 //Pin used for the fan to cool controller, comment out to disable this function #define CONTROLLERFAN_PIN -1 //Pin used for the fan to cool controller (-1 to disable)
#define CONTROLLERFAN_SEC 60 //How many seconds, after all motors were disabled, the fan should run #define CONTROLLERFAN_SECS 60 //How many seconds, after all motors were disabled, the fan should run
#define CONTROLLERFAN_SPEED 255 // == full speed
// When first starting the main fan, run it at full speed for the // When first starting the main fan, run it at full speed for the
// given number of milliseconds. This gets the fan spinning reliably // given number of milliseconds. This gets the fan spinning reliably
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
//#define FAN_KICKSTART_TIME 100 //#define FAN_KICKSTART_TIME 100
// Extruder cooling fans
// Configure fan pin outputs to automatically turn on/off when the associated
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE.
// Multiple extruders can be assigned to the same pin in which case
// the fan will turn on when any selected extruder is above the threshold.
#define EXTRUDER_0_AUTO_FAN_PIN -1
#define EXTRUDER_1_AUTO_FAN_PIN -1
#define EXTRUDER_2_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
//=========================================================================== //===========================================================================
//=============================Mechanical Settings=========================== //=============================Mechanical Settings===========================
//=========================================================================== //===========================================================================
// This defines the number of extruders
#define EXTRUDERS 1
#define ENDSTOPS_ONLY_FOR_HOMING // If defined the endstops will only be used for homing #define ENDSTOPS_ONLY_FOR_HOMING // If defined the endstops will only be used for homing
@ -142,6 +146,31 @@
#define EXTRUDERS 1 #define EXTRUDERS 1
#endif #endif
// Enable this for dual x-carriage printers.
// A dual x-carriage design has the advantage that the inactive extruder can be parked which
// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage
// allowing faster printing speeds.
//#define DUAL_X_CARRIAGE
#ifdef DUAL_X_CARRIAGE
// Configuration for second X-carriage
// Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
// the second x-carriage always homes to the maximum endstop.
#define X2_MIN_POS 88 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
#define X2_MAX_POS 350.45 // set maximum to the distance between toolheads when both heads are homed
#define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position
#define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position
// However: In this mode the EXTRUDER_OFFSET_X value for the second extruder provides a software
// override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops
// without modifying the firmware (through the "M218 T1 X???" command).
// Remember: you should set the second extruder x-offset to 0 in your slicer.
// Pins for second x-carriage stepper driver (defined here to avoid further complicating pins.h)
#define X2_ENABLE_PIN 29
#define X2_STEP_PIN 25
#define X2_DIR_PIN 23
#endif // DUAL_X_CARRIAGE
//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again: //homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
#define X_HOME_RETRACT_MM 5 #define X_HOME_RETRACT_MM 5
#define Y_HOME_RETRACT_MM 5 #define Y_HOME_RETRACT_MM 5
@ -210,9 +239,9 @@
// However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled.
//#define WATCHDOG_RESET_MANUAL //#define WATCHDOG_RESET_MANUAL
#endif #endif
// Enable the option to stop SD printing when hitting and endstops, needs to be enabled from the LCD menu when this option is enabled. // Enable the option to stop SD printing when hitting and endstops, needs to be enabled from the LCD menu when this option is enabled.
//#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
// extruder advance constant (s2/mm3) // extruder advance constant (s2/mm3)
// //
@ -276,7 +305,7 @@ const unsigned int dropsegments=5; //everything with less than this number of st
#else #else
#define BLOCK_BUFFER_SIZE 16 // maximize block buffer #define BLOCK_BUFFER_SIZE 16 // maximize block buffer
#endif #endif
//The ASCII buffer for recieving from the serial: //The ASCII buffer for recieving from the serial:
#define MAX_CMD_SIZE 96 #define MAX_CMD_SIZE 96
@ -308,6 +337,9 @@ const unsigned int dropsegments=5; //everything with less than this number of st
//=========================================================================== //===========================================================================
//============================= Define Defines ============================ //============================= Define Defines ============================
//=========================================================================== //===========================================================================
#if EXTRUDERS > 1 && defined TEMP_SENSOR_1_AS_REDUNDANT
#error "You cannot use TEMP_SENSOR_1_AS_REDUNDANT if EXTRUDERS > 1"
#endif
#if TEMP_SENSOR_0 > 0 #if TEMP_SENSOR_0 > 0
#define THERMISTORHEATER_0 TEMP_SENSOR_0 #define THERMISTORHEATER_0 TEMP_SENSOR_0

6
Marlin/DOGMbitmaps.h
View file

@ -1,7 +1,7 @@
#define START_BMPWIDTH 60 //Width in pixels #define START_BMPWIDTH 60 //Width in pixels
#define START_BMPHEIGHT 64 //Height in pixels #define START_BMPHEIGHT 64 //Height in pixels
#define START_BMPBYTEWIDTH 8 //Width in bytes #define START_BMPBYTEWIDTH 8 //Width in bytes
unsigned char start_bmp[574] PROGMEM = { //AVR-GCC, WinAVR const unsigned char start_bmp[574] PROGMEM = { //AVR-GCC, WinAVR
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF0, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF0,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF0, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF0,
0xFF,0xFF,0xFF,0xF9,0xFF,0xFF,0xFF,0xF0, 0xFF,0xFF,0xFF,0xF9,0xFF,0xFF,0xFF,0xF0,
@ -71,7 +71,7 @@ unsigned char start_bmp[574] PROGMEM = { //AVR-GCC, WinAVR
#define STATUS_SCREENWIDTH 115 //Width in pixels #define STATUS_SCREENWIDTH 115 //Width in pixels
#define STATUS_SCREENHEIGHT 19 //Height in pixels #define STATUS_SCREENHEIGHT 19 //Height in pixels
#define STATUS_SCREENBYTEWIDTH 15 //Width in bytes #define STATUS_SCREENBYTEWIDTH 15 //Width in bytes
unsigned char status_screen0_bmp[] PROGMEM = { //AVR-GCC, WinAVR const unsigned char status_screen0_bmp[] PROGMEM = { //AVR-GCC, WinAVR
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7F,0xFF,0xE0, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7F,0xFF,0xE0,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x70,0x00,0xE0, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x70,0x00,0xE0,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x63,0x0C,0x60, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x63,0x0C,0x60,
@ -96,7 +96,7 @@ unsigned char status_screen0_bmp[] PROGMEM = { //AVR-GCC, WinAVR
#define STATUS_SCREENWIDTH 115 //Width in pixels #define STATUS_SCREENWIDTH 115 //Width in pixels
#define STATUS_SCREENHEIGHT 19 //Height in pixels #define STATUS_SCREENHEIGHT 19 //Height in pixels
#define STATUS_SCREENBYTEWIDTH 15 //Width in bytes #define STATUS_SCREENBYTEWIDTH 15 //Width in bytes
unsigned char status_screen1_bmp[] PROGMEM = { //AVR-GCC, WinAVR const unsigned char status_screen1_bmp[] PROGMEM = { //AVR-GCC, WinAVR
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7F,0xFF,0xE0, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7F,0xFF,0xE0,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x70,0x00,0xE0, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x70,0x00,0xE0,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x61,0xF8,0x60, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x61,0xF8,0x60,

2
Marlin/LiquidCrystalRus.cpp
View file

@ -36,7 +36,7 @@ const PROGMEM uint8_t utf_recode[] =
// S = 0; No shift // S = 0; No shift
// //
// Note, however, that resetting the Arduino doesn't reset the LCD, so we // Note, however, that resetting the Arduino doesn't reset the LCD, so we
// can't assume that its in that state when a sketch starts (and the // can't assume that it's in that state when a sketch starts (and the
// LiquidCrystal constructor is called). // LiquidCrystal constructor is called).
// //
// modified 27 Jul 2011 // modified 27 Jul 2011

29
Marlin/Makefile
View file

@ -1,12 +1,12 @@
# Sprinter Arduino Project Makefile # Sprinter Arduino Project Makefile
# #
# Makefile Based on: # Makefile Based on:
# Arduino 0011 Makefile # Arduino 0011 Makefile
# Arduino adaptation by mellis, eighthave, oli.keller # Arduino adaptation by mellis, eighthave, oli.keller
# Marlin adaption by Daid # Marlin adaption by Daid
# #
# This has been tested with Arduino 0022. # This has been tested with Arduino 0022.
# #
# This makefile allows you to build sketches from the command line # This makefile allows you to build sketches from the command line
# without the Arduino environment (or Java). # without the Arduino environment (or Java).
# #
@ -21,7 +21,7 @@
# (e.g. UPLOAD_PORT = /dev/tty.USB0). If the exact name of this file # (e.g. UPLOAD_PORT = /dev/tty.USB0). If the exact name of this file
# changes, you can use * as a wildcard (e.g. UPLOAD_PORT = /dev/tty.usb*). # changes, you can use * as a wildcard (e.g. UPLOAD_PORT = /dev/tty.usb*).
# #
# 3. Set the line containing "MCU" to match your board's processor. # 3. Set the line containing "MCU" to match your board's processor.
# Older one's are atmega8 based, newer ones like Arduino Mini, Bluetooth # Older one's are atmega8 based, newer ones like Arduino Mini, Bluetooth
# or Diecimila have the atmega168. If you're using a LilyPad Arduino, # or Diecimila have the atmega168. If you're using a LilyPad Arduino,
# change F_CPU to 8000000. If you are using Gen7 electronics, you # change F_CPU to 8000000. If you are using Gen7 electronics, you
@ -44,7 +44,7 @@ ARDUINO_INSTALL_DIR ?= ../../arduino-0022
ARDUINO_VERSION ?= 22 ARDUINO_VERSION ?= 22
# You can optionally set a path to the avr-gcc tools. Requires a trailing slash. (ex: /usr/local/avr-gcc/bin) # You can optionally set a path to the avr-gcc tools. Requires a trailing slash. (ex: /usr/local/avr-gcc/bin)
AVR_TOOLS_PATH ?= AVR_TOOLS_PATH ?=
#Programmer configuration #Programmer configuration
UPLOAD_RATE ?= 115200 UPLOAD_RATE ?= 115200
@ -114,6 +114,12 @@ MCU ?= atmega644p
else ifeq ($(HARDWARE_MOTHERBOARD),63) else ifeq ($(HARDWARE_MOTHERBOARD),63)
HARDWARE_VARIANT ?= Sanguino HARDWARE_VARIANT ?= Sanguino
MCU ?= atmega644p MCU ?= atmega644p
else ifeq ($(HARDWARE_MOTHERBOARD),65)
HARDWARE_VARIANT ?= Sanguino
MCU ?= atmega1284p
else ifeq ($(HARDWARE_MOTHERBOARD),66)
HARDWARE_VARIANT ?= Sanguino
MCU ?= atmega1284p
#Ultimaker #Ultimaker
else ifeq ($(HARDWARE_MOTHERBOARD),7) else ifeq ($(HARDWARE_MOTHERBOARD),7)
@ -213,7 +219,7 @@ CXXSRC = WMath.cpp WString.cpp Print.cpp Marlin_main.cpp \
SdFile.cpp SdVolume.cpp motion_control.cpp planner.cpp \ SdFile.cpp SdVolume.cpp motion_control.cpp planner.cpp \
stepper.cpp temperature.cpp cardreader.cpp ConfigurationStore.cpp \ stepper.cpp temperature.cpp cardreader.cpp ConfigurationStore.cpp \
watchdog.cpp watchdog.cpp
CXXSRC += LiquidCrystal.cpp ultralcd.cpp SPI.cpp CXXSRC += LiquidCrystal.cpp ultralcd.cpp SPI.cpp Servo.cpp Tone.cpp
#Check for Arduino 1.0.0 or higher and use the correct sourcefiles for that version #Check for Arduino 1.0.0 or higher and use the correct sourcefiles for that version
ifeq ($(shell [ $(ARDUINO_VERSION) -ge 100 ] && echo true), true) ifeq ($(shell [ $(ARDUINO_VERSION) -ge 100 ] && echo true), true)
@ -277,6 +283,7 @@ ifneq ($(HARDWARE_MOTHERBOARD),)
CTUNING += -DMOTHERBOARD=${HARDWARE_MOTHERBOARD} CTUNING += -DMOTHERBOARD=${HARDWARE_MOTHERBOARD}
endif endif
#CEXTRA = -Wa,-adhlns=$(<:.c=.lst) #CEXTRA = -Wa,-adhlns=$(<:.c=.lst)
CEXTRA = -fno-use-cxa-atexit
CFLAGS := $(CDEBUG) $(CDEFS) $(CINCS) -O$(OPT) $(CWARN) $(CEXTRA) $(CTUNING) CFLAGS := $(CDEBUG) $(CDEFS) $(CINCS) -O$(OPT) $(CWARN) $(CEXTRA) $(CTUNING)
CXXFLAGS := $(CDEFS) $(CINCS) -O$(OPT) -Wall $(CEXTRA) $(CTUNING) CXXFLAGS := $(CDEFS) $(CINCS) -O$(OPT) -Wall $(CEXTRA) $(CTUNING)
@ -287,7 +294,7 @@ LDFLAGS = -lm
# Programming support using avrdude. Settings and variables. # Programming support using avrdude. Settings and variables.
AVRDUDE_PORT = $(UPLOAD_PORT) AVRDUDE_PORT = $(UPLOAD_PORT)
AVRDUDE_WRITE_FLASH = -U flash:w:$(BUILD_DIR)/$(TARGET).hex:i AVRDUDE_WRITE_FLASH = -U flash:w:$(BUILD_DIR)/$(TARGET).hex:i
AVRDUDE_FLAGS = -D -C $(ARDUINO_INSTALL_DIR)/hardware/tools/avrdude.conf \ AVRDUDE_FLAGS = -D -C $(ARDUINO_INSTALL_DIR)/hardware/tools/avr/etc/avrdude.conf \
-p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) \ -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) \
-b $(UPLOAD_RATE) -b $(UPLOAD_RATE)
@ -317,19 +324,19 @@ endif
# Default target. # Default target.
all: sizeafter all: sizeafter
build: $(BUILD_DIR) elf hex build: $(BUILD_DIR) elf hex
# Creates the object directory # Creates the object directory
$(BUILD_DIR): $(BUILD_DIR):
$P mkdir -p $(BUILD_DIR) $P mkdir -p $(BUILD_DIR)
elf: $(BUILD_DIR)/$(TARGET).elf elf: $(BUILD_DIR)/$(TARGET).elf
hex: $(BUILD_DIR)/$(TARGET).hex hex: $(BUILD_DIR)/$(TARGET).hex
eep: $(BUILD_DIR)/$(TARGET).eep eep: $(BUILD_DIR)/$(TARGET).eep
lss: $(BUILD_DIR)/$(TARGET).lss lss: $(BUILD_DIR)/$(TARGET).lss
sym: $(BUILD_DIR)/$(TARGET).sym sym: $(BUILD_DIR)/$(TARGET).sym
# Program the device. # Program the device.
# Do not try to reset an arduino if it's not one # Do not try to reset an arduino if it's not one
upload: $(BUILD_DIR)/$(TARGET).hex upload: $(BUILD_DIR)/$(TARGET).hex
ifeq (${AVRDUDE_PROGRAMMER}, arduino) ifeq (${AVRDUDE_PROGRAMMER}, arduino)
@ -356,7 +363,7 @@ COFFCONVERT=$(OBJCOPY) --debugging \
--change-section-address .data-0x800000 \ --change-section-address .data-0x800000 \
--change-section-address .bss-0x800000 \ --change-section-address .bss-0x800000 \
--change-section-address .noinit-0x800000 \ --change-section-address .noinit-0x800000 \
--change-section-address .eeprom-0x810000 --change-section-address .eeprom-0x810000
coff: $(BUILD_DIR)/$(TARGET).elf coff: $(BUILD_DIR)/$(TARGET).elf

21
Marlin/Marlin.h
View file

@ -96,7 +96,11 @@ void process_commands();
void manage_inactivity(); void manage_inactivity();
#if X_ENABLE_PIN > -1 #if defined(DUAL_X_CARRIAGE) && defined(X_ENABLE_PIN) && X_ENABLE_PIN > -1 \
&& defined(X2_ENABLE_PIN) && X2_ENABLE_PIN > -1
#define enable_x() do { WRITE(X_ENABLE_PIN, X_ENABLE_ON); WRITE(X2_ENABLE_PIN, X_ENABLE_ON); } while (0)
#define disable_x() do { WRITE(X_ENABLE_PIN,!X_ENABLE_ON); WRITE(X2_ENABLE_PIN,!X_ENABLE_ON); } while (0)
#elif defined(X_ENABLE_PIN) && X_ENABLE_PIN > -1
#define enable_x() WRITE(X_ENABLE_PIN, X_ENABLE_ON) #define enable_x() WRITE(X_ENABLE_PIN, X_ENABLE_ON)
#define disable_x() WRITE(X_ENABLE_PIN,!X_ENABLE_ON) #define disable_x() WRITE(X_ENABLE_PIN,!X_ENABLE_ON)
#else #else
@ -104,7 +108,7 @@ void manage_inactivity();
#define disable_x() ; #define disable_x() ;
#endif #endif
#if Y_ENABLE_PIN > -1 #if defined(Y_ENABLE_PIN) && Y_ENABLE_PIN > -1
#define enable_y() WRITE(Y_ENABLE_PIN, Y_ENABLE_ON) #define enable_y() WRITE(Y_ENABLE_PIN, Y_ENABLE_ON)
#define disable_y() WRITE(Y_ENABLE_PIN,!Y_ENABLE_ON) #define disable_y() WRITE(Y_ENABLE_PIN,!Y_ENABLE_ON)
#else #else
@ -112,7 +116,7 @@ void manage_inactivity();
#define disable_y() ; #define disable_y() ;
#endif #endif
#if Z_ENABLE_PIN > -1 #if defined(Z_ENABLE_PIN) && Z_ENABLE_PIN > -1
#ifdef Z_DUAL_STEPPER_DRIVERS #ifdef Z_DUAL_STEPPER_DRIVERS
#define enable_z() { WRITE(Z_ENABLE_PIN, Z_ENABLE_ON); WRITE(Z2_ENABLE_PIN, Z_ENABLE_ON); } #define enable_z() { WRITE(Z_ENABLE_PIN, Z_ENABLE_ON); WRITE(Z2_ENABLE_PIN, Z_ENABLE_ON); }
#define disable_z() { WRITE(Z_ENABLE_PIN,!Z_ENABLE_ON); WRITE(Z2_ENABLE_PIN,!Z_ENABLE_ON); } #define disable_z() { WRITE(Z_ENABLE_PIN,!Z_ENABLE_ON); WRITE(Z2_ENABLE_PIN,!Z_ENABLE_ON); }
@ -157,6 +161,9 @@ void FlushSerialRequestResend();
void ClearToSend(); void ClearToSend();
void get_coordinates(); void get_coordinates();
#ifdef DELTA
void calculate_delta(float cartesian[3]);
#endif
void prepare_move(); void prepare_move();
void kill(); void kill();
void Stop(); void Stop();
@ -186,6 +193,14 @@ extern float add_homeing[3];
extern float min_pos[3]; extern float min_pos[3];
extern float max_pos[3]; extern float max_pos[3];
extern int fanSpeed; extern int fanSpeed;
#ifdef BARICUDA
extern int ValvePressure;
extern int EtoPPressure;
#endif
#ifdef FAN_SOFT_PWM
extern unsigned char fanSpeedSoftPwm;
#endif
#ifdef FWRETRACT #ifdef FWRETRACT
extern bool autoretract_enabled; extern bool autoretract_enabled;

18
Marlin/Marlin.pde
View file

@ -34,13 +34,19 @@
#include "pins.h" #include "pins.h"
#ifdef ULTRA_LCD #ifdef ULTRA_LCD
#ifdef DOGLCD #if defined(LCD_I2C_TYPE_PCF8575)
#include <U8glib.h> // library for graphics LCD by Oli Kraus (https://code.google.com/p/u8glib/) #include <Wire.h>
#else #include <LiquidCrystal_I2C.h>
#include <LiquidCrystal.h> // library for character LCD #elif defined(LCD_I2C_TYPE_MCP23017) || defined(LCD_I2C_TYPE_MCP23008)
#endif #include <Wire.h>
#include <LiquidTWI2.h>
#elif defined(DOGLCD)
#include <U8glib.h> // library for graphics LCD by Oli Kraus (https://code.google.com/p/u8glib/)
#else
#include <LiquidCrystal.h> // library for character LCD
#endif
#endif #endif
#if DIGIPOTSS_PIN > -1 #if defined(DIGIPOTSS_PIN) && DIGIPOTSS_PIN > -1
#include <SPI.h> #include <SPI.h>
#endif #endif

1021
Marlin/Marlin_main.cpp
View file

@ -3,17 +3,17 @@
/* /*
Reprap firmware based on Sprinter and grbl. Reprap firmware based on Sprinter and grbl.
Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
This program is free software: you can redistribute it and/or modify This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or the Free Software Foundation, either version 3 of the License, or
(at your option) any later version. (at your option) any later version.
This program is distributed in the hope that it will be useful, This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details. GNU General Public License for more details.
You should have received a copy of the GNU General Public License You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. along with this program. If not, see <http://www.gnu.org/licenses/>.
*/ */
@ -22,8 +22,8 @@
This firmware is a mashup between Sprinter and grbl. This firmware is a mashup between Sprinter and grbl.
(https://github.com/kliment/Sprinter) (https://github.com/kliment/Sprinter)
(https://github.com/simen/grbl/tree) (https://github.com/simen/grbl/tree)
It has preliminary support for Matthew Roberts advance algorithm It has preliminary support for Matthew Roberts advance algorithm
http://reprap.org/pipermail/reprap-dev/2011-May/003323.html http://reprap.org/pipermail/reprap-dev/2011-May/003323.html
*/ */
@ -40,7 +40,11 @@
#include "language.h" #include "language.h"
#include "pins_arduino.h" #include "pins_arduino.h"
#if DIGIPOTSS_PIN > -1 #if NUM_SERVOS > 0
#include "Servo.h"
#endif
#if defined(DIGIPOTSS_PIN) && DIGIPOTSS_PIN > -1
#include <SPI.h> #include <SPI.h>
#endif #endif
@ -63,17 +67,9 @@
// G91 - Use Relative Coordinates // G91 - Use Relative Coordinates
// G92 - Set current position to cordinates given // G92 - Set current position to cordinates given
//RepRap M Codes // M Codes
// M0 - Unconditional stop - Wait for user to press a button on the LCD (Only if ULTRA_LCD is enabled) // M0 - Unconditional stop - Wait for user to press a button on the LCD (Only if ULTRA_LCD is enabled)
// M1 - Same as M0 // M1 - Same as M0
// M104 - Set extruder target temp
// M105 - Read current temp
// M106 - Fan on
// M107 - Fan off
// M109 - Wait for extruder current temp to reach target temp.
// M114 - Display current position
//Custom M Codes
// M17 - Enable/Power all stepper motors // M17 - Enable/Power all stepper motors
// M18 - Disable all stepper motors; same as M84 // M18 - Disable all stepper motors; same as M84
// M20 - List SD card // M20 - List SD card
@ -88,21 +84,33 @@
// M29 - Stop SD write // M29 - Stop SD write
// M30 - Delete file from SD (M30 filename.g) // M30 - Delete file from SD (M30 filename.g)
// M31 - Output time since last M109 or SD card start to serial // M31 - Output time since last M109 or SD card start to serial
// M32 - Select file and start SD print (Can be used when printing from SD card)
// M42 - Change pin status via gcode Use M42 Px Sy to set pin x to value y, when omitting Px the onboard led will be used. // M42 - Change pin status via gcode Use M42 Px Sy to set pin x to value y, when omitting Px the onboard led will be used.
// M80 - Turn on Power Supply // M80 - Turn on Power Supply
// M81 - Turn off Power Supply // M81 - Turn off Power Supply
// M82 - Set E codes absolute (default) // M82 - Set E codes absolute (default)
// M83 - Set E codes relative while in Absolute Coordinates (G90) mode // M83 - Set E codes relative while in Absolute Coordinates (G90) mode
// M84 - Disable steppers until next move, // M84 - Disable steppers until next move,
// or use S<seconds> to specify an inactivity timeout, after which the steppers will be disabled. S0 to disable the timeout. // or use S<seconds> to specify an inactivity timeout, after which the steppers will be disabled. S0 to disable the timeout.
// M85 - Set inactivity shutdown timer with parameter S<seconds>. To disable set zero (default) // M85 - Set inactivity shutdown timer with parameter S<seconds>. To disable set zero (default)
// M92 - Set axis_steps_per_unit - same syntax as G92 // M92 - Set axis_steps_per_unit - same syntax as G92
// M114 - Output current position to serial port // M104 - Set extruder target temp
// M115 - Capabilities string // M105 - Read current temp
// M106 - Fan on
// M107 - Fan off
// M109 - Sxxx Wait for extruder current temp to reach target temp. Waits only when heating
// Rxxx Wait for extruder current temp to reach target temp. Waits when heating and cooling
// M114 - Output current position to serial port
// M115 - Capabilities string
// M117 - display message // M117 - display message
// M119 - Output Endstop status to serial port // M119 - Output Endstop status to serial port
// M126 - Solenoid Air Valve Open (BariCUDA support by jmil)
// M127 - Solenoid Air Valve Closed (BariCUDA vent to atmospheric pressure by jmil)
// M128 - EtoP Open (BariCUDA EtoP = electricity to air pressure transducer by jmil)
// M129 - EtoP Closed (BariCUDA EtoP = electricity to air pressure transducer by jmil)
// M140 - Set bed target temp // M140 - Set bed target temp
// M190 - Wait for bed current temp to reach target temp. // M190 - Sxxx Wait for bed current temp to reach target temp. Waits only when heating
// Rxxx Wait for bed current temp to reach target temp. Waits when heating and cooling
// M200 - Set filament diameter // M200 - Set filament diameter
// M201 - Set max acceleration in units/s^2 for print moves (M201 X1000 Y1000) // M201 - Set max acceleration in units/s^2 for print moves (M201 X1000 Y1000)
// M202 - Set max acceleration in units/s^2 for travel moves (M202 X1000 Y1000) Unused in Marlin!! // M202 - Set max acceleration in units/s^2 for travel moves (M202 X1000 Y1000) Unused in Marlin!!
@ -117,14 +125,16 @@
// M220 S<factor in percent>- set speed factor override percentage // M220 S<factor in percent>- set speed factor override percentage
// M221 S<factor in percent>- set extrude factor override percentage // M221 S<factor in percent>- set extrude factor override percentage
// M240 - Trigger a camera to take a photograph // M240 - Trigger a camera to take a photograph
// M250 - Set LCD contrast C<contrast value> (value 0..63)
// M280 - set servo position absolute. P: servo index, S: angle or microseconds
// M300 - Play beepsound S<frequency Hz> P<duration ms> // M300 - Play beepsound S<frequency Hz> P<duration ms>
// M301 - Set PID parameters P I and D // M301 - Set PID parameters P I and D
// M302 - Allow cold extrudes // M302 - Allow cold extrudes, or set the minimum extrude S<temperature>.
// M303 - PID relay autotune S<temperature> sets the target temperature. (default target temperature = 150C) // M303 - PID relay autotune S<temperature> sets the target temperature. (default target temperature = 150C)
// M304 - Set bed PID parameters P I and D // M304 - Set bed PID parameters P I and D
// M400 - Finish all moves // M400 - Finish all moves
// M500 - stores paramters in EEPROM // M500 - stores paramters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// M503 - print the current settings (from memory not from eeprom) // M503 - print the current settings (from memory not from eeprom)
// M540 - Use S[0|1] to enable or disable the stop SD card print on endstop hit (requires ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) // M540 - Use S[0|1] to enable or disable the stop SD card print on endstop hit (requires ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED)
@ -160,14 +170,22 @@ float min_pos[3] = { X_MIN_POS, Y_MIN_POS, Z_MIN_POS };
float max_pos[3] = { X_MAX_POS, Y_MAX_POS, Z_MAX_POS }; float max_pos[3] = { X_MAX_POS, Y_MAX_POS, Z_MAX_POS };
// Extruder offset, only in XY plane // Extruder offset, only in XY plane
#if EXTRUDERS > 1 #if EXTRUDERS > 1
float extruder_offset[2][EXTRUDERS] = { float extruder_offset[2][EXTRUDERS] = {
#if defined(EXTRUDER_OFFSET_X) && defined(EXTRUDER_OFFSET_Y) #if defined(EXTRUDER_OFFSET_X) && defined(EXTRUDER_OFFSET_Y)
EXTRUDER_OFFSET_X, EXTRUDER_OFFSET_Y EXTRUDER_OFFSET_X, EXTRUDER_OFFSET_Y
#endif #endif
}; };
#endif #endif
uint8_t active_extruder = 0; uint8_t active_extruder = 0;
int fanSpeed=0; int fanSpeed=0;
#ifdef SERVO_ENDSTOPS
int servo_endstops[] = SERVO_ENDSTOPS;
int servo_endstop_angles[] = SERVO_ENDSTOP_ANGLES;
#endif
#ifdef BARICUDA
int ValvePressure=0;
int EtoPPressure=0;
#endif
#ifdef FWRETRACT #ifdef FWRETRACT
bool autoretract_enabled=true; bool autoretract_enabled=true;
@ -176,11 +194,18 @@ int fanSpeed=0;
float retract_recover_length=0, retract_recover_feedrate=8*60; float retract_recover_length=0, retract_recover_feedrate=8*60;
#endif #endif
#ifdef ULTIPANEL
bool powersupply = true;
#endif
//=========================================================================== //===========================================================================
//=============================private variables============================= //=============================private variables=============================
//=========================================================================== //===========================================================================
const char axis_codes[NUM_AXIS] = {'X', 'Y', 'Z', 'E'}; const char axis_codes[NUM_AXIS] = {'X', 'Y', 'Z', 'E'};
static float destination[NUM_AXIS] = { 0.0, 0.0, 0.0, 0.0}; static float destination[NUM_AXIS] = { 0.0, 0.0, 0.0, 0.0};
#ifdef DELTA
static float delta[3] = {0.0, 0.0, 0.0};
#endif
static float offset[3] = {0.0, 0.0, 0.0}; static float offset[3] = {0.0, 0.0, 0.0};
static bool home_all_axis = true; static bool home_all_axis = true;
static float feedrate = 1500.0, next_feedrate, saved_feedrate; static float feedrate = 1500.0, next_feedrate, saved_feedrate;
@ -217,6 +242,13 @@ static uint8_t tmp_extruder;
bool Stopped=false; bool Stopped=false;
#if NUM_SERVOS > 0
Servo servos[NUM_SERVOS];
#endif
bool CooldownNoWait = true;
bool target_direction;
//=========================================================================== //===========================================================================
//=============================ROUTINES============================= //=============================ROUTINES=============================
//=========================================================================== //===========================================================================
@ -283,49 +315,72 @@ void enquecommand_P(const char *cmd)
void setup_killpin() void setup_killpin()
{ {
#if( KILL_PIN>-1 ) #if defined(KILL_PIN) && KILL_PIN > -1
pinMode(KILL_PIN,INPUT); pinMode(KILL_PIN,INPUT);
WRITE(KILL_PIN,HIGH); WRITE(KILL_PIN,HIGH);
#endif #endif
} }
void setup_photpin() void setup_photpin()
{ {
#ifdef PHOTOGRAPH_PIN #if defined(PHOTOGRAPH_PIN) && PHOTOGRAPH_PIN > -1
#if (PHOTOGRAPH_PIN > -1)
SET_OUTPUT(PHOTOGRAPH_PIN); SET_OUTPUT(PHOTOGRAPH_PIN);
WRITE(PHOTOGRAPH_PIN, LOW); WRITE(PHOTOGRAPH_PIN, LOW);
#endif #endif
#endif
} }
void setup_powerhold() void setup_powerhold()
{ {
#ifdef SUICIDE_PIN #if defined(SUICIDE_PIN) && SUICIDE_PIN > -1
#if (SUICIDE_PIN> -1) SET_OUTPUT(SUICIDE_PIN);
SET_OUTPUT(SUICIDE_PIN); WRITE(SUICIDE_PIN, HIGH);
WRITE(SUICIDE_PIN, HIGH); #endif
#endif #if defined(PS_ON_PIN) && PS_ON_PIN > -1
#endif SET_OUTPUT(PS_ON_PIN);
#if (PS_ON_PIN > -1) WRITE(PS_ON_PIN, PS_ON_AWAKE);
SET_OUTPUT(PS_ON_PIN); #endif
WRITE(PS_ON_PIN, PS_ON_AWAKE);
#endif
} }
void suicide() void suicide()
{ {
#ifdef SUICIDE_PIN #if defined(SUICIDE_PIN) && SUICIDE_PIN > -1
#if (SUICIDE_PIN> -1) SET_OUTPUT(SUICIDE_PIN);
SET_OUTPUT(SUICIDE_PIN); WRITE(SUICIDE_PIN, LOW);
WRITE(SUICIDE_PIN, LOW); #endif
#endif }
void servo_init()
{
#if (NUM_SERVOS >= 1) && defined(SERVO0_PIN) && (SERVO0_PIN > -1)
servos[0].attach(SERVO0_PIN);
#endif
#if (NUM_SERVOS >= 2) && defined(SERVO1_PIN) && (SERVO1_PIN > -1)
servos[1].attach(SERVO1_PIN);
#endif
#if (NUM_SERVOS >= 3) && defined(SERVO2_PIN) && (SERVO2_PIN > -1)
servos[2].attach(SERVO2_PIN);
#endif
#if (NUM_SERVOS >= 4) && defined(SERVO3_PIN) && (SERVO3_PIN > -1)
servos[3].attach(SERVO3_PIN);
#endif
#if (NUM_SERVOS >= 5)
#error "TODO: enter initalisation code for more servos"
#endif
// Set position of Servo Endstops that are defined
#ifdef SERVO_ENDSTOPS
for(int8_t i = 0; i < 3; i++)
{
if(servo_endstops[i] > -1) {
servos[servo_endstops[i]].write(servo_endstop_angles[i * 2 + 1]);
}
}
#endif #endif
} }
void setup() void setup()
{ {
setup_killpin(); setup_killpin();
setup_powerhold(); setup_powerhold();
MYSERIAL.begin(BAUDRATE); MYSERIAL.begin(BAUDRATE);
SERIAL_PROTOCOLLNPGM("start"); SERIAL_PROTOCOLLNPGM("start");
@ -362,25 +417,23 @@ void setup()
{ {
fromsd[i] = false; fromsd[i] = false;
} }
// loads data from EEPROM if available else uses defaults (and resets step acceleration rate)
Config_RetrieveSettings();
tp_init(); // Initialize temperature loop // loads data from EEPROM if available else uses defaults (and resets step acceleration rate)
Config_RetrieveSettings();
tp_init(); // Initialize temperature loop
plan_init(); // Initialize planner; plan_init(); // Initialize planner;
watchdog_init(); watchdog_init();
st_init(); // Initialize stepper, this enables interrupts! st_init(); // Initialize stepper, this enables interrupts!
setup_photpin(); setup_photpin();
servo_init();
lcd_init(); lcd_init();
_delay_ms(1000); // wait 1sec to display the splash screen
#ifdef CONTROLLERFAN_PIN #if defined(CONTROLLERFAN_PIN) && CONTROLLERFAN_PIN > -1
SET_OUTPUT(CONTROLLERFAN_PIN); //Set pin used for driver cooling fan SET_OUTPUT(CONTROLLERFAN_PIN); //Set pin used for driver cooling fan
#endif #endif
#ifdef EXTRUDERFAN_PIN
SET_OUTPUT(EXTRUDERFAN_PIN); //Set pin used for extruder cooling fan
#endif
} }
@ -396,9 +449,9 @@ void loop()
#ifdef SDSUPPORT #ifdef SDSUPPORT
if(card.saving) if(card.saving)
{ {
if(strstr_P(cmdbuffer[bufindr], PSTR("M29")) == NULL) if(strstr_P(cmdbuffer[bufindr], PSTR("M29")) == NULL)
{ {
card.write_command(cmdbuffer[bufindr]); card.write_command(cmdbuffer[bufindr]);
if(card.logging) if(card.logging)
{ {
process_commands(); process_commands();
@ -407,16 +460,16 @@ void loop()
{ {
SERIAL_PROTOCOLLNPGM(MSG_OK); SERIAL_PROTOCOLLNPGM(MSG_OK);
} }
} }
else else
{ {
card.closefile(); card.closefile();
SERIAL_PROTOCOLLNPGM(MSG_FILE_SAVED); SERIAL_PROTOCOLLNPGM(MSG_FILE_SAVED);
} }
} }
else else
{ {
process_commands(); process_commands();
} }
#else #else
process_commands(); process_commands();
@ -431,14 +484,14 @@ void loop()
lcd_update(); lcd_update();
} }
void get_command() void get_command()
{ {
while( MYSERIAL.available() > 0 && buflen < BUFSIZE) { while( MYSERIAL.available() > 0 && buflen < BUFSIZE) {
serial_char = MYSERIAL.read(); serial_char = MYSERIAL.read();
if(serial_char == '\n' || if(serial_char == '\n' ||
serial_char == '\r' || serial_char == '\r' ||
(serial_char == ':' && comment_mode == false) || (serial_char == ':' && comment_mode == false) ||
serial_count >= (MAX_CMD_SIZE - 1) ) serial_count >= (MAX_CMD_SIZE - 1) )
{ {
if(!serial_count) { //if empty line if(!serial_count) { //if empty line
comment_mode = false; //for new command comment_mode = false; //for new command
@ -479,7 +532,7 @@ void get_command()
} }
//if no errors, continue parsing //if no errors, continue parsing
} }
else else
{ {
SERIAL_ERROR_START; SERIAL_ERROR_START;
SERIAL_ERRORPGM(MSG_ERR_NO_CHECKSUM); SERIAL_ERRORPGM(MSG_ERR_NO_CHECKSUM);
@ -511,11 +564,11 @@ void get_command()
case 2: case 2:
case 3: case 3:
if(Stopped == false) { // If printer is stopped by an error the G[0-3] codes are ignored. if(Stopped == false) { // If printer is stopped by an error the G[0-3] codes are ignored.
#ifdef SDSUPPORT #ifdef SDSUPPORT
if(card.saving) if(card.saving)
break; break;
#endif //SDSUPPORT #endif //SDSUPPORT
SERIAL_PROTOCOLLNPGM(MSG_OK); SERIAL_PROTOCOLLNPGM(MSG_OK);
} }
else { else {
SERIAL_ERRORLNPGM(MSG_ERR_STOPPED); SERIAL_ERRORLNPGM(MSG_ERR_STOPPED);
@ -545,10 +598,10 @@ void get_command()
while( !card.eof() && buflen < BUFSIZE) { while( !card.eof() && buflen < BUFSIZE) {
int16_t n=card.get(); int16_t n=card.get();
serial_char = (char)n; serial_char = (char)n;
if(serial_char == '\n' || if(serial_char == '\n' ||
serial_char == '\r' || serial_char == '\r' ||
(serial_char == ':' && comment_mode == false) || (serial_char == ':' && comment_mode == false) ||
serial_count >= (MAX_CMD_SIZE - 1)||n==-1) serial_count >= (MAX_CMD_SIZE - 1)||n==-1)
{ {
if(card.eof()){ if(card.eof()){
SERIAL_PROTOCOLLNPGM(MSG_FILE_PRINTED); SERIAL_PROTOCOLLNPGM(MSG_FILE_PRINTED);
@ -564,7 +617,7 @@ void get_command()
lcd_setstatus(time); lcd_setstatus(time);
card.printingHasFinished(); card.printingHasFinished();
card.checkautostart(true); card.checkautostart(true);
} }
if(!serial_count) if(!serial_count)
{ {
@ -576,7 +629,7 @@ void get_command()
fromsd[bufindw] = true; fromsd[bufindw] = true;
buflen += 1; buflen += 1;
bufindw = (bufindw + 1)%BUFSIZE; bufindw = (bufindw + 1)%BUFSIZE;
// } // }
comment_mode = false; //for new command comment_mode = false; //for new command
serial_count = 0; //clear buffer serial_count = 0; //clear buffer
} }
@ -586,20 +639,20 @@ void get_command()
if(!comment_mode) cmdbuffer[bufindw][serial_count++] = serial_char; if(!comment_mode) cmdbuffer[bufindw][serial_count++] = serial_char;
} }
} }
#endif //SDSUPPORT #endif //SDSUPPORT
} }
float code_value() float code_value()
{ {
return (strtod(&cmdbuffer[bufindr][strchr_pointer - cmdbuffer[bufindr] + 1], NULL)); return (strtod(&cmdbuffer[bufindr][strchr_pointer - cmdbuffer[bufindr] + 1], NULL));
} }
long code_value_long() long code_value_long()
{ {
return (strtol(&cmdbuffer[bufindr][strchr_pointer - cmdbuffer[bufindr] + 1], NULL, 10)); return (strtol(&cmdbuffer[bufindr][strchr_pointer - cmdbuffer[bufindr] + 1], NULL, 10));
} }
bool code_seen(char code) bool code_seen(char code)
@ -608,17 +661,17 @@ bool code_seen(char code)
return (strchr_pointer != NULL); //Return True if a character was found return (strchr_pointer != NULL); //Return True if a character was found
} }
#define DEFINE_PGM_READ_ANY(type, reader) \ #define DEFINE_PGM_READ_ANY(type, reader) \
static inline type pgm_read_any(const type *p) \ static inline type pgm_read_any(const type *p) \
{ return pgm_read_##reader##_near(p); } { return pgm_read_##reader##_near(p); }
DEFINE_PGM_READ_ANY(float, float); DEFINE_PGM_READ_ANY(float, float);
DEFINE_PGM_READ_ANY(signed char, byte); DEFINE_PGM_READ_ANY(signed char, byte);
#define XYZ_CONSTS_FROM_CONFIG(type, array, CONFIG) \ #define XYZ_CONSTS_FROM_CONFIG(type, array, CONFIG) \
static const PROGMEM type array##_P[3] = \ static const PROGMEM type array##_P[3] = \
{ X_##CONFIG, Y_##CONFIG, Z_##CONFIG }; \ { X_##CONFIG, Y_##CONFIG, Z_##CONFIG }; \
static inline type array(int axis) \ static inline type array(int axis) \
{ return pgm_read_any(&array##_P[axis]); } { return pgm_read_any(&array##_P[axis]); }
XYZ_CONSTS_FROM_CONFIG(float, base_min_pos, MIN_POS); XYZ_CONSTS_FROM_CONFIG(float, base_min_pos, MIN_POS);
@ -628,7 +681,44 @@ XYZ_CONSTS_FROM_CONFIG(float, max_length, MAX_LENGTH);
XYZ_CONSTS_FROM_CONFIG(float, home_retract_mm, HOME_RETRACT_MM); XYZ_CONSTS_FROM_CONFIG(float, home_retract_mm, HOME_RETRACT_MM);
XYZ_CONSTS_FROM_CONFIG(signed char, home_dir, HOME_DIR); XYZ_CONSTS_FROM_CONFIG(signed char, home_dir, HOME_DIR);
#ifdef DUAL_X_CARRIAGE
#if EXTRUDERS == 1 || defined(COREXY) \
|| !defined(X2_ENABLE_PIN) || !defined(X2_STEP_PIN) || !defined(X2_DIR_PIN) \
|| !defined(X2_HOME_POS) || !defined(X2_MIN_POS) || !defined(X2_MAX_POS) \
|| !defined(X_MAX_PIN) || X_MAX_PIN < 0
#error "Missing or invalid definitions for DUAL_X_CARRIAGE mode."
#endif
#if X_HOME_DIR != -1 || X2_HOME_DIR != 1
#error "Please use canonical x-carriage assignment" // the x-carriages are defined by their homing directions
#endif
static float x_home_pos(int extruder) {
if (extruder == 0)
return base_home_pos(X_AXIS) + add_homeing[X_AXIS];
else
// In dual carriage mode the extruder offset provides an override of the
// second X-carriage offset when homed - otherwise X2_HOME_POS is used.
// This allow soft recalibration of the second extruder offset position without firmware reflash
// (through the M218 command).
return (extruder_offset[X_AXIS][1] > 0) ? extruder_offset[X_AXIS][1] : X2_HOME_POS;
}
static int x_home_dir(int extruder) {
return (extruder == 0) ? X_HOME_DIR : X2_HOME_DIR;
}
static float inactive_x_carriage_pos = X2_MAX_POS;
#endif
static void axis_is_at_home(int axis) { static void axis_is_at_home(int axis) {
#ifdef DUAL_X_CARRIAGE
if (axis == X_AXIS && active_extruder != 0) {
current_position[X_AXIS] = x_home_pos(active_extruder);
min_pos[X_AXIS] = X2_MIN_POS;
max_pos[X_AXIS] = max(extruder_offset[X_AXIS][1], X2_MAX_POS);
return;
}
#endif
current_position[axis] = base_home_pos(axis) + add_homeing[axis]; current_position[axis] = base_home_pos(axis) + add_homeing[axis];
min_pos[axis] = base_min_pos(axis) + add_homeing[axis]; min_pos[axis] = base_min_pos(axis) + add_homeing[axis];
max_pos[axis] = base_max_pos(axis) + add_homeing[axis]; max_pos[axis] = base_max_pos(axis) + add_homeing[axis];
@ -642,28 +732,52 @@ static void homeaxis(int axis) {
axis==Y_AXIS ? HOMEAXIS_DO(Y) : axis==Y_AXIS ? HOMEAXIS_DO(Y) :
axis==Z_AXIS ? HOMEAXIS_DO(Z) : axis==Z_AXIS ? HOMEAXIS_DO(Z) :
0) { 0) {
int axis_home_dir = home_dir(axis);
#ifdef DUAL_X_CARRIAGE
if (axis == X_AXIS)
axis_home_dir = x_home_dir(active_extruder);
#endif
// Engage Servo endstop if enabled
#ifdef SERVO_ENDSTOPS
if (SERVO_ENDSTOPS[axis] > -1) {
servos[servo_endstops[axis]].write(servo_endstop_angles[axis * 2]);
}
#endif
current_position[axis] = 0; current_position[axis] = 0;
plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]); plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
destination[axis] = 1.5 * max_length(axis) * home_dir(axis); destination[axis] = 1.5 * max_length(axis) * axis_home_dir;
feedrate = homing_feedrate[axis]; feedrate = homing_feedrate[axis];
plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder); plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder);
st_synchronize(); st_synchronize();
current_position[axis] = 0; current_position[axis] = 0;
plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]); plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
destination[axis] = -home_retract_mm(axis) * home_dir(axis); destination[axis] = -home_retract_mm(axis) * axis_home_dir;
plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder); plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder);
st_synchronize(); st_synchronize();
destination[axis] = 2*home_retract_mm(axis) * home_dir(axis); destination[axis] = 2*home_retract_mm(axis) * axis_home_dir;
feedrate = homing_feedrate[axis]/2 ; #ifdef DELTA
feedrate = homing_feedrate[axis]/10;
#else
feedrate = homing_feedrate[axis]/2 ;
#endif
plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder); plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder);
st_synchronize(); st_synchronize();
axis_is_at_home(axis); axis_is_at_home(axis);
destination[axis] = current_position[axis]; destination[axis] = current_position[axis];
feedrate = 0.0; feedrate = 0.0;
endstops_hit_on_purpose(); endstops_hit_on_purpose();
// Retract Servo endstop if enabled
#ifdef SERVO_ENDSTOPS
if (SERVO_ENDSTOPS[axis] > -1) {
servos[servo_endstops[axis]].write(servo_endstop_angles[axis * 2 + 1]);
}
#endif
} }
} }
#define HOMEAXIS(LETTER) homeaxis(LETTER##_AXIS) #define HOMEAXIS(LETTER) homeaxis(LETTER##_AXIS)
@ -703,7 +817,7 @@ void process_commands()
codenum = 0; codenum = 0;
if(code_seen('P')) codenum = code_value(); // milliseconds to wait if(code_seen('P')) codenum = code_value(); // milliseconds to wait
if(code_seen('S')) codenum = code_value() * 1000; // seconds to wait if(code_seen('S')) codenum = code_value() * 1000; // seconds to wait
st_synchronize(); st_synchronize();
codenum += millis(); // keep track of when we started waiting codenum += millis(); // keep track of when we started waiting
previous_millis_cmd = millis(); previous_millis_cmd = millis();
@ -713,30 +827,30 @@ void process_commands()
lcd_update(); lcd_update();
} }
break; break;
#ifdef FWRETRACT #ifdef FWRETRACT
case 10: // G10 retract case 10: // G10 retract
if(!retracted) if(!retracted)
{ {
destination[X_AXIS]=current_position[X_AXIS]; destination[X_AXIS]=current_position[X_AXIS];
destination[Y_AXIS]=current_position[Y_AXIS]; destination[Y_AXIS]=current_position[Y_AXIS];
destination[Z_AXIS]=current_position[Z_AXIS]; destination[Z_AXIS]=current_position[Z_AXIS];
current_position[Z_AXIS]+=-retract_zlift; current_position[Z_AXIS]+=-retract_zlift;
destination[E_AXIS]=current_position[E_AXIS]-retract_length; destination[E_AXIS]=current_position[E_AXIS]-retract_length;
feedrate=retract_feedrate; feedrate=retract_feedrate;
retracted=true; retracted=true;
prepare_move(); prepare_move();
} }
break; break;
case 11: // G10 retract_recover case 11: // G10 retract_recover
if(!retracted) if(!retracted)
{ {
destination[X_AXIS]=current_position[X_AXIS]; destination[X_AXIS]=current_position[X_AXIS];
destination[Y_AXIS]=current_position[Y_AXIS]; destination[Y_AXIS]=current_position[Y_AXIS];
destination[Z_AXIS]=current_position[Z_AXIS]; destination[Z_AXIS]=current_position[Z_AXIS];
current_position[Z_AXIS]+=retract_zlift; current_position[Z_AXIS]+=retract_zlift;
current_position[E_AXIS]+=-retract_recover_length; current_position[E_AXIS]+=-retract_recover_length;
feedrate=retract_recover_feedrate; feedrate=retract_recover_feedrate;
retracted=false; retracted=false;
prepare_move(); prepare_move();
@ -748,34 +862,73 @@ void process_commands()
saved_feedmultiply = feedmultiply; saved_feedmultiply = feedmultiply;
feedmultiply = 100; feedmultiply = 100;
previous_millis_cmd = millis(); previous_millis_cmd = millis();
enable_endstops(true); enable_endstops(true);
for(int8_t i=0; i < NUM_AXIS; i++) { for(int8_t i=0; i < NUM_AXIS; i++) {
destination[i] = current_position[i]; destination[i] = current_position[i];
} }
feedrate = 0.0; feedrate = 0.0;
#ifdef DELTA
// A delta can only safely home all axis at the same time
// all axis have to home at the same time
// Move all carriages up together until the first endstop is hit.
current_position[X_AXIS] = 0;
current_position[Y_AXIS] = 0;
current_position[Z_AXIS] = 0;
plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
destination[X_AXIS] = 3 * Z_MAX_LENGTH;
destination[Y_AXIS] = 3 * Z_MAX_LENGTH;
destination[Z_AXIS] = 3 * Z_MAX_LENGTH;
feedrate = 1.732 * homing_feedrate[X_AXIS];
plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder);
st_synchronize();
endstops_hit_on_purpose();
current_position[X_AXIS] = destination[X_AXIS];
current_position[Y_AXIS] = destination[Y_AXIS];
current_position[Z_AXIS] = destination[Z_AXIS];
// take care of back off and rehome now we are all at the top
HOMEAXIS(X);
HOMEAXIS(Y);
HOMEAXIS(Z);
calculate_delta(current_position);
plan_set_position(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], current_position[E_AXIS]);
#else // NOT DELTA
home_all_axis = !((code_seen(axis_codes[0])) || (code_seen(axis_codes[1])) || (code_seen(axis_codes[2]))); home_all_axis = !((code_seen(axis_codes[0])) || (code_seen(axis_codes[1])) || (code_seen(axis_codes[2])));
#if Z_HOME_DIR > 0 // If homing away from BED do Z first #if Z_HOME_DIR > 0 // If homing away from BED do Z first
if((home_all_axis) || (code_seen(axis_codes[Z_AXIS]))) { if((home_all_axis) || (code_seen(axis_codes[Z_AXIS]))) {
HOMEAXIS(Z); HOMEAXIS(Z);
} }
#endif #endif
#ifdef QUICK_HOME #ifdef QUICK_HOME
if((home_all_axis)||( code_seen(axis_codes[X_AXIS]) && code_seen(axis_codes[Y_AXIS])) ) //first diagonal move if((home_all_axis)||( code_seen(axis_codes[X_AXIS]) && code_seen(axis_codes[Y_AXIS])) ) //first diagonal move
{ {
current_position[X_AXIS] = 0;current_position[Y_AXIS] = 0; current_position[X_AXIS] = 0;current_position[Y_AXIS] = 0;
plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]); #ifndef DUAL_X_CARRIAGE
destination[X_AXIS] = 1.5 * X_MAX_LENGTH * X_HOME_DIR;destination[Y_AXIS] = 1.5 * Y_MAX_LENGTH * Y_HOME_DIR; int x_axis_home_dir = home_dir(X_AXIS);
feedrate = homing_feedrate[X_AXIS]; #else
int x_axis_home_dir = x_home_dir(active_extruder);
#endif
plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
destination[X_AXIS] = 1.5 * max_length(X_AXIS) * x_axis_home_dir;destination[Y_AXIS] = 1.5 * max_length(Y_AXIS) * home_dir(Y_AXIS);
feedrate = homing_feedrate[X_AXIS];
if(homing_feedrate[Y_AXIS]<feedrate) if(homing_feedrate[Y_AXIS]<feedrate)
feedrate =homing_feedrate[Y_AXIS]; feedrate =homing_feedrate[Y_AXIS];
plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder); plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder);
st_synchronize(); st_synchronize();
axis_is_at_home(X_AXIS); axis_is_at_home(X_AXIS);
axis_is_at_home(Y_AXIS); axis_is_at_home(Y_AXIS);
plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]); plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
@ -785,25 +938,36 @@ void process_commands()
feedrate = 0.0; feedrate = 0.0;
st_synchronize(); st_synchronize();
endstops_hit_on_purpose(); endstops_hit_on_purpose();
current_position[X_AXIS] = destination[X_AXIS];
current_position[Y_AXIS] = destination[Y_AXIS];
current_position[Z_AXIS] = destination[Z_AXIS];
} }
#endif #endif
if((home_all_axis) || (code_seen(axis_codes[X_AXIS]))) if((home_all_axis) || (code_seen(axis_codes[X_AXIS])))
{ {
#ifdef DUAL_X_CARRIAGE
int tmp_extruder = active_extruder;
active_extruder = !active_extruder;
HOMEAXIS(X);
inactive_x_carriage_pos = current_position[X_AXIS];
active_extruder = tmp_extruder;
#endif
HOMEAXIS(X); HOMEAXIS(X);
} }
if((home_all_axis) || (code_seen(axis_codes[Y_AXIS]))) { if((home_all_axis) || (code_seen(axis_codes[Y_AXIS]))) {
HOMEAXIS(Y); HOMEAXIS(Y);
} }
#if Z_HOME_DIR < 0 // If homing towards BED do Z last #if Z_HOME_DIR < 0 // If homing towards BED do Z last
if((home_all_axis) || (code_seen(axis_codes[Z_AXIS]))) { if((home_all_axis) || (code_seen(axis_codes[Z_AXIS]))) {
HOMEAXIS(Z); HOMEAXIS(Z);
} }
#endif #endif
if(code_seen(axis_codes[X_AXIS])) if(code_seen(axis_codes[X_AXIS]))
{ {
if(code_value_long() != 0) { if(code_value_long() != 0) {
current_position[X_AXIS]=code_value()+add_homeing[0]; current_position[X_AXIS]=code_value()+add_homeing[0];
@ -822,11 +986,12 @@ void process_commands()
} }
} }
plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]); plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
#endif // else DELTA
#ifdef ENDSTOPS_ONLY_FOR_HOMING #ifdef ENDSTOPS_ONLY_FOR_HOMING
enable_endstops(false); enable_endstops(false);
#endif #endif
feedrate = saved_feedrate; feedrate = saved_feedrate;
feedmultiply = saved_feedmultiply; feedmultiply = saved_feedmultiply;
previous_millis_cmd = millis(); previous_millis_cmd = millis();
@ -842,13 +1007,13 @@ void process_commands()
if(!code_seen(axis_codes[E_AXIS])) if(!code_seen(axis_codes[E_AXIS]))
st_synchronize(); st_synchronize();
for(int8_t i=0; i < NUM_AXIS; i++) { for(int8_t i=0; i < NUM_AXIS; i++) {
if(code_seen(axis_codes[i])) { if(code_seen(axis_codes[i])) {
if(i == E_AXIS) { if(i == E_AXIS) {
current_position[i] = code_value(); current_position[i] = code_value();
plan_set_e_position(current_position[E_AXIS]); plan_set_e_position(current_position[E_AXIS]);
} }
else { else {
current_position[i] = code_value()+add_homeing[i]; current_position[i] = code_value()+add_homeing[i];
plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]); plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
} }
} }
@ -859,7 +1024,7 @@ void process_commands()
else if(code_seen('M')) else if(code_seen('M'))
{ {
switch( (int)code_value() ) switch( (int)code_value() )
{ {
#ifdef ULTIPANEL #ifdef ULTIPANEL
case 0: // M0 - Unconditional stop - Wait for user button press on LCD case 0: // M0 - Unconditional stop - Wait for user button press on LCD
@ -869,18 +1034,18 @@ void process_commands()
codenum = 0; codenum = 0;
if(code_seen('P')) codenum = code_value(); // milliseconds to wait if(code_seen('P')) codenum = code_value(); // milliseconds to wait
if(code_seen('S')) codenum = code_value() * 1000; // seconds to wait if(code_seen('S')) codenum = code_value() * 1000; // seconds to wait
st_synchronize(); st_synchronize();
previous_millis_cmd = millis(); previous_millis_cmd = millis();
if (codenum > 0){ if (codenum > 0){
codenum += millis(); // keep track of when we started waiting codenum += millis(); // keep track of when we started waiting
while(millis() < codenum && !LCD_CLICKED){ while(millis() < codenum && !lcd_clicked()){
manage_heater(); manage_heater();
manage_inactivity(); manage_inactivity();
lcd_update(); lcd_update();
} }
}else{ }else{
while(!LCD_CLICKED){ while(!lcd_clicked()){
manage_heater(); manage_heater();
manage_inactivity(); manage_inactivity();
lcd_update(); lcd_update();
@ -892,12 +1057,12 @@ void process_commands()
#endif #endif
case 17: case 17:
LCD_MESSAGEPGM(MSG_NO_MOVE); LCD_MESSAGEPGM(MSG_NO_MOVE);
enable_x(); enable_x();
enable_y(); enable_y();
enable_z(); enable_z();
enable_e0(); enable_e0();
enable_e1(); enable_e1();
enable_e2(); enable_e2();
break; break;
#ifdef SDSUPPORT #ifdef SDSUPPORT
@ -907,9 +1072,9 @@ void process_commands()
SERIAL_PROTOCOLLNPGM(MSG_END_FILE_LIST); SERIAL_PROTOCOLLNPGM(MSG_END_FILE_LIST);
break; break;
case 21: // M21 - init SD card case 21: // M21 - init SD card
card.initsd(); card.initsd();
break; break;
case 22: //M22 - release SD card case 22: //M22 - release SD card
card.release(); card.release();
@ -949,18 +1114,31 @@ void process_commands()
//processed in write to file routine above //processed in write to file routine above
//card,saving = false; //card,saving = false;
break; break;
case 30: //M30 <filename> Delete File case 30: //M30 <filename> Delete File
if (card.cardOK){ if (card.cardOK){
card.closefile(); card.closefile();
starpos = (strchr(strchr_pointer + 4,'*')); starpos = (strchr(strchr_pointer + 4,'*'));
if(starpos != NULL){ if(starpos != NULL){
char* npos = strchr(cmdbuffer[bufindr], 'N'); char* npos = strchr(cmdbuffer[bufindr], 'N');
strchr_pointer = strchr(npos,' ') + 1; strchr_pointer = strchr(npos,' ') + 1;
*(starpos-1) = '\0'; *(starpos-1) = '\0';
} }
card.removeFile(strchr_pointer + 4); card.removeFile(strchr_pointer + 4);
} }
break; break;
case 32: //M32 - Select file and start SD print
if(card.sdprinting) {
st_synchronize();
card.closefile();
card.sdprinting = false;
}
starpos = (strchr(strchr_pointer + 4,'*'));
if(starpos!=NULL)
*(starpos-1)='\0';
card.openFile(strchr_pointer + 4,true);
card.startFileprint();
starttime=millis();
break;
case 928: //M928 - Start SD write case 928: //M928 - Start SD write
starpos = (strchr(strchr_pointer + 5,'*')); starpos = (strchr(strchr_pointer + 5,'*'));
if(starpos != NULL){ if(starpos != NULL){
@ -970,7 +1148,7 @@ void process_commands()
} }
card.openLogFile(strchr_pointer+5); card.openLogFile(strchr_pointer+5);
break; break;
#endif //SDSUPPORT #endif //SDSUPPORT
case 31: //M31 take time since the start of the SD print or an M109 command case 31: //M31 take time since the start of the SD print or an M109 command
@ -1003,6 +1181,10 @@ void process_commands()
break; break;
} }
} }
#if defined(FAN_PIN) && FAN_PIN > -1
if (pin_number == FAN_PIN)
fanSpeed = pin_status;
#endif
if (pin_number > -1) if (pin_number > -1)
{ {
pinMode(pin_number, OUTPUT); pinMode(pin_number, OUTPUT);
@ -1024,14 +1206,14 @@ void process_commands()
case 105 : // M105 case 105 : // M105
if(setTargetedHotend(105)){ if(setTargetedHotend(105)){
break; break;
} }
#if (TEMP_0_PIN > -1) #if defined(TEMP_0_PIN) && TEMP_0_PIN > -1
SERIAL_PROTOCOLPGM("ok T:"); SERIAL_PROTOCOLPGM("ok T:");
SERIAL_PROTOCOL_F(degHotend(tmp_extruder),1); SERIAL_PROTOCOL_F(degHotend(tmp_extruder),1);
SERIAL_PROTOCOLPGM(" /"); SERIAL_PROTOCOLPGM(" /");
SERIAL_PROTOCOL_F(degTargetHotend(tmp_extruder),1); SERIAL_PROTOCOL_F(degTargetHotend(tmp_extruder),1);
#if TEMP_BED_PIN > -1 #if defined(TEMP_BED_PIN) && TEMP_BED_PIN > -1
SERIAL_PROTOCOLPGM(" B:"); SERIAL_PROTOCOLPGM(" B:");
SERIAL_PROTOCOL_F(degBed(),1); SERIAL_PROTOCOL_F(degBed(),1);
SERIAL_PROTOCOLPGM(" /"); SERIAL_PROTOCOLPGM(" /");
SERIAL_PROTOCOL_F(degTargetBed(),1); SERIAL_PROTOCOL_F(degTargetBed(),1);
@ -1042,44 +1224,50 @@ void process_commands()
#endif #endif
SERIAL_PROTOCOLPGM(" @:"); SERIAL_PROTOCOLPGM(" @:");
SERIAL_PROTOCOL(getHeaterPower(tmp_extruder)); SERIAL_PROTOCOL(getHeaterPower(tmp_extruder));
SERIAL_PROTOCOLPGM(" B@:"); SERIAL_PROTOCOLPGM(" B@:");
SERIAL_PROTOCOL(getHeaterPower(-1)); SERIAL_PROTOCOL(getHeaterPower(-1));
SERIAL_PROTOCOLLN(""); SERIAL_PROTOCOLLN("");
return; return;
break; break;
case 109: case 109:
{// M109 - Wait for extruder heater to reach target. {// M109 - Wait for extruder heater to reach target.
if(setTargetedHotend(109)){ if(setTargetedHotend(109)){
break; break;
} }
LCD_MESSAGEPGM(MSG_HEATING); LCD_MESSAGEPGM(MSG_HEATING);
#ifdef AUTOTEMP #ifdef AUTOTEMP
autotemp_enabled=false; autotemp_enabled=false;
#endif #endif
if (code_seen('S')) setTargetHotend(code_value(), tmp_extruder); if (code_seen('S')) {
setTargetHotend(code_value(), tmp_extruder);
CooldownNoWait = true;
} else if (code_seen('R')) {
setTargetHotend(code_value(), tmp_extruder);
CooldownNoWait = false;
}
#ifdef AUTOTEMP #ifdef AUTOTEMP
if (code_seen('S')) autotemp_min=code_value(); if (code_seen('S')) autotemp_min=code_value();
if (code_seen('B')) autotemp_max=code_value(); if (code_seen('B')) autotemp_max=code_value();
if (code_seen('F')) if (code_seen('F'))
{ {
autotemp_factor=code_value(); autotemp_factor=code_value();
autotemp_enabled=true; autotemp_enabled=true;
} }
#endif #endif
setWatch(); setWatch();
codenum = millis(); codenum = millis();
/* See if we are heating up or cooling down */ /* See if we are heating up or cooling down */
bool target_direction = isHeatingHotend(tmp_extruder); // true if heating, false if cooling target_direction = isHeatingHotend(tmp_extruder); // true if heating, false if cooling
#ifdef TEMP_RESIDENCY_TIME #ifdef TEMP_RESIDENCY_TIME
long residencyStart; long residencyStart;
residencyStart = -1; residencyStart = -1;
/* continue to loop until we have reached the target temp /* continue to loop until we have reached the target temp
_and_ until TEMP_RESIDENCY_TIME hasn't passed since we reached it */ _and_ until TEMP_RESIDENCY_TIME hasn't passed since we reached it */
while((residencyStart == -1) || while((residencyStart == -1) ||
(residencyStart >= 0 && (((unsigned int) (millis() - residencyStart)) < (TEMP_RESIDENCY_TIME * 1000UL))) ) { (residencyStart >= 0 && (((unsigned int) (millis() - residencyStart)) < (TEMP_RESIDENCY_TIME * 1000UL))) ) {
@ -1089,9 +1277,9 @@ void process_commands()
if( (millis() - codenum) > 1000UL ) if( (millis() - codenum) > 1000UL )
{ //Print Temp Reading and remaining time every 1 second while heating up/cooling down { //Print Temp Reading and remaining time every 1 second while heating up/cooling down
SERIAL_PROTOCOLPGM("T:"); SERIAL_PROTOCOLPGM("T:");
SERIAL_PROTOCOL_F(degHotend(tmp_extruder),1); SERIAL_PROTOCOL_F(degHotend(tmp_extruder),1);
SERIAL_PROTOCOLPGM(" E:"); SERIAL_PROTOCOLPGM(" E:");
SERIAL_PROTOCOL((int)tmp_extruder); SERIAL_PROTOCOL((int)tmp_extruder);
#ifdef TEMP_RESIDENCY_TIME #ifdef TEMP_RESIDENCY_TIME
SERIAL_PROTOCOLPGM(" W:"); SERIAL_PROTOCOLPGM(" W:");
if(residencyStart > -1) if(residencyStart > -1)
@ -1099,7 +1287,7 @@ void process_commands()
codenum = ((TEMP_RESIDENCY_TIME * 1000UL) - (millis() - residencyStart)) / 1000UL; codenum = ((TEMP_RESIDENCY_TIME * 1000UL) - (millis() - residencyStart)) / 1000UL;
SERIAL_PROTOCOLLN( codenum ); SERIAL_PROTOCOLLN( codenum );
} }
else else
{ {
SERIAL_PROTOCOLLN( "?" ); SERIAL_PROTOCOLLN( "?" );
} }
@ -1116,7 +1304,7 @@ void process_commands()
or when current temp falls outside the hysteresis after target temp was reached */ or when current temp falls outside the hysteresis after target temp was reached */
if ((residencyStart == -1 && target_direction && (degHotend(tmp_extruder) >= (degTargetHotend(tmp_extruder)-TEMP_WINDOW))) || if ((residencyStart == -1 && target_direction && (degHotend(tmp_extruder) >= (degTargetHotend(tmp_extruder)-TEMP_WINDOW))) ||
(residencyStart == -1 && !target_direction && (degHotend(tmp_extruder) <= (degTargetHotend(tmp_extruder)+TEMP_WINDOW))) || (residencyStart == -1 && !target_direction && (degHotend(tmp_extruder) <= (degTargetHotend(tmp_extruder)+TEMP_WINDOW))) ||
(residencyStart > -1 && labs(degHotend(tmp_extruder) - degTargetHotend(tmp_extruder)) > TEMP_HYSTERESIS) ) (residencyStart > -1 && labs(degHotend(tmp_extruder) - degTargetHotend(tmp_extruder)) > TEMP_HYSTERESIS) )
{ {
residencyStart = millis(); residencyStart = millis();
} }
@ -1128,11 +1316,20 @@ void process_commands()
} }
break; break;
case 190: // M190 - Wait for bed heater to reach target. case 190: // M190 - Wait for bed heater to reach target.
#if TEMP_BED_PIN > -1 #if defined(TEMP_BED_PIN) && TEMP_BED_PIN > -1
LCD_MESSAGEPGM(MSG_BED_HEATING); LCD_MESSAGEPGM(MSG_BED_HEATING);
if (code_seen('S')) setTargetBed(code_value()); if (code_seen('S')) {
codenum = millis(); setTargetBed(code_value());
while(isHeatingBed()) CooldownNoWait = true;
} else if (code_seen('R')) {
setTargetBed(code_value());
CooldownNoWait = false;
}
codenum = millis();
target_direction = isHeatingBed(); // true if heating, false if cooling
while ( target_direction ? (isHeatingBed()) : (isCoolingBed()&&(CooldownNoWait==false)) )
{ {
if(( millis() - codenum) > 1000 ) //Print Temp Reading every 1 second while heating up. if(( millis() - codenum) > 1000 ) //Print Temp Reading every 1 second while heating up.
{ {
@ -1140,11 +1337,11 @@ void process_commands()
SERIAL_PROTOCOLPGM("T:"); SERIAL_PROTOCOLPGM("T:");
SERIAL_PROTOCOL(tt); SERIAL_PROTOCOL(tt);
SERIAL_PROTOCOLPGM(" E:"); SERIAL_PROTOCOLPGM(" E:");
SERIAL_PROTOCOL((int)active_extruder); SERIAL_PROTOCOL((int)active_extruder);
SERIAL_PROTOCOLPGM(" B:"); SERIAL_PROTOCOLPGM(" B:");
SERIAL_PROTOCOL_F(degBed(),1); SERIAL_PROTOCOL_F(degBed(),1);
SERIAL_PROTOCOLLN(""); SERIAL_PROTOCOLLN("");
codenum = millis(); codenum = millis();
} }
manage_heater(); manage_heater();
manage_inactivity(); manage_inactivity();
@ -1155,38 +1352,86 @@ void process_commands()
#endif #endif
break; break;
#if FAN_PIN > -1 #if defined(FAN_PIN) && FAN_PIN > -1
case 106: //M106 Fan On case 106: //M106 Fan On
if (code_seen('S')){ if (code_seen('S')){
fanSpeed=constrain(code_value(),0,255); fanSpeed=constrain(code_value(),0,255);
} }
else { else {
fanSpeed=255; fanSpeed=255;
} }
break; break;
case 107: //M107 Fan Off case 107: //M107 Fan Off
fanSpeed = 0; fanSpeed = 0;
break; break;
#endif //FAN_PIN #endif //FAN_PIN
#ifdef BARICUDA
// PWM for HEATER_1_PIN
#if defined(HEATER_1_PIN) && HEATER_1_PIN > -1
case 126: //M126 valve open
if (code_seen('S')){
ValvePressure=constrain(code_value(),0,255);
}
else {
ValvePressure=255;
}
break;
case 127: //M127 valve closed
ValvePressure = 0;
break;
#endif //HEATER_1_PIN
#if (PS_ON_PIN > -1) // PWM for HEATER_2_PIN
case 80: // M80 - ATX Power On #if defined(HEATER_2_PIN) && HEATER_2_PIN > -1
case 128: //M128 valve open
if (code_seen('S')){
EtoPPressure=constrain(code_value(),0,255);
}
else {
EtoPPressure=255;
}
break;
case 129: //M129 valve closed
EtoPPressure = 0;
break;
#endif //HEATER_2_PIN
#endif
#if defined(PS_ON_PIN) && PS_ON_PIN > -1
case 80: // M80 - Turn on Power Supply
SET_OUTPUT(PS_ON_PIN); //GND SET_OUTPUT(PS_ON_PIN); //GND
WRITE(PS_ON_PIN, PS_ON_AWAKE); WRITE(PS_ON_PIN, PS_ON_AWAKE);
#ifdef ULTIPANEL
powersupply = true;
LCD_MESSAGEPGM(WELCOME_MSG);
lcd_update();
#endif
break; break;
#endif #endif
case 81: // M81 - ATX Power Off case 81: // M81 - Turn off Power Supply
disable_heater();
#if defined SUICIDE_PIN && SUICIDE_PIN > -1 st_synchronize();
disable_e0();
disable_e1();
disable_e2();
finishAndDisableSteppers();
fanSpeed = 0;
delay(1000); // Wait a little before to switch off
#if defined(SUICIDE_PIN) && SUICIDE_PIN > -1
st_synchronize(); st_synchronize();
suicide(); suicide();
#elif (PS_ON_PIN > -1) #elif defined(PS_ON_PIN) && PS_ON_PIN > -1
SET_OUTPUT(PS_ON_PIN); SET_OUTPUT(PS_ON_PIN);
WRITE(PS_ON_PIN, PS_ON_ASLEEP); WRITE(PS_ON_PIN, PS_ON_ASLEEP);
#endif #endif
break; #ifdef ULTIPANEL
powersupply = false;
LCD_MESSAGEPGM(MACHINE_NAME" "MSG_OFF".");
lcd_update();
#endif
break;
case 82: case 82:
axis_relative_modes[3] = false; axis_relative_modes[3] = false;
break; break;
@ -1195,11 +1440,11 @@ void process_commands()
break; break;
case 18: //compatibility case 18: //compatibility
case 84: // M84 case 84: // M84
if(code_seen('S')){ if(code_seen('S')){
stepper_inactive_time = code_value() * 1000; stepper_inactive_time = code_value() * 1000;
} }
else else
{ {
bool all_axis = !((code_seen(axis_codes[0])) || (code_seen(axis_codes[1])) || (code_seen(axis_codes[2]))|| (code_seen(axis_codes[3]))); bool all_axis = !((code_seen(axis_codes[0])) || (code_seen(axis_codes[1])) || (code_seen(axis_codes[2]))|| (code_seen(axis_codes[3])));
if(all_axis) if(all_axis)
{ {
@ -1221,18 +1466,18 @@ void process_commands()
disable_e1(); disable_e1();
disable_e2(); disable_e2();
} }
#endif #endif
} }
} }
break; break;
case 85: // M85 case 85: // M85
code_seen('S'); code_seen('S');
max_inactive_time = code_value() * 1000; max_inactive_time = code_value() * 1000;
break; break;
case 92: // M92 case 92: // M92
for(int8_t i=0; i < NUM_AXIS; i++) for(int8_t i=0; i < NUM_AXIS; i++)
{ {
if(code_seen(axis_codes[i])) if(code_seen(axis_codes[i]))
{ {
if(i == 3) { // E if(i == 3) { // E
float value = code_value(); float value = code_value();
@ -1266,16 +1511,16 @@ void process_commands()
SERIAL_PROTOCOL(current_position[Y_AXIS]); SERIAL_PROTOCOL(current_position[Y_AXIS]);
SERIAL_PROTOCOLPGM("Z:"); SERIAL_PROTOCOLPGM("Z:");
SERIAL_PROTOCOL(current_position[Z_AXIS]); SERIAL_PROTOCOL(current_position[Z_AXIS]);
SERIAL_PROTOCOLPGM("E:"); SERIAL_PROTOCOLPGM("E:");
SERIAL_PROTOCOL(current_position[E_AXIS]); SERIAL_PROTOCOL(current_position[E_AXIS]);
SERIAL_PROTOCOLPGM(MSG_COUNT_X); SERIAL_PROTOCOLPGM(MSG_COUNT_X);
SERIAL_PROTOCOL(float(st_get_position(X_AXIS))/axis_steps_per_unit[X_AXIS]); SERIAL_PROTOCOL(float(st_get_position(X_AXIS))/axis_steps_per_unit[X_AXIS]);
SERIAL_PROTOCOLPGM("Y:"); SERIAL_PROTOCOLPGM("Y:");
SERIAL_PROTOCOL(float(st_get_position(Y_AXIS))/axis_steps_per_unit[Y_AXIS]); SERIAL_PROTOCOL(float(st_get_position(Y_AXIS))/axis_steps_per_unit[Y_AXIS]);
SERIAL_PROTOCOLPGM("Z:"); SERIAL_PROTOCOLPGM("Z:");
SERIAL_PROTOCOL(float(st_get_position(Z_AXIS))/axis_steps_per_unit[Z_AXIS]); SERIAL_PROTOCOL(float(st_get_position(Z_AXIS))/axis_steps_per_unit[Z_AXIS]);
SERIAL_PROTOCOLLN(""); SERIAL_PROTOCOLLN("");
break; break;
case 120: // M120 case 120: // M120
@ -1286,34 +1531,34 @@ void process_commands()
break; break;
case 119: // M119 case 119: // M119
SERIAL_PROTOCOLLN(MSG_M119_REPORT); SERIAL_PROTOCOLLN(MSG_M119_REPORT);
#if (X_MIN_PIN > -1) #if defined(X_MIN_PIN) && X_MIN_PIN > -1
SERIAL_PROTOCOLPGM(MSG_X_MIN); SERIAL_PROTOCOLPGM(MSG_X_MIN);
SERIAL_PROTOCOLLN(((READ(X_MIN_PIN)^X_ENDSTOPS_INVERTING)?MSG_ENDSTOP_HIT:MSG_ENDSTOP_OPEN)); SERIAL_PROTOCOLLN(((READ(X_MIN_PIN)^X_ENDSTOPS_INVERTING)?MSG_ENDSTOP_HIT:MSG_ENDSTOP_OPEN));
#endif #endif
#if (X_MAX_PIN > -1) #if defined(X_MAX_PIN) && X_MAX_PIN > -1
SERIAL_PROTOCOLPGM(MSG_X_MAX); SERIAL_PROTOCOLPGM(MSG_X_MAX);
SERIAL_PROTOCOLLN(((READ(X_MAX_PIN)^X_ENDSTOPS_INVERTING)?MSG_ENDSTOP_HIT:MSG_ENDSTOP_OPEN)); SERIAL_PROTOCOLLN(((READ(X_MAX_PIN)^X_ENDSTOPS_INVERTING)?MSG_ENDSTOP_HIT:MSG_ENDSTOP_OPEN));
#endif #endif
#if (Y_MIN_PIN > -1) #if defined(Y_MIN_PIN) && Y_MIN_PIN > -1
SERIAL_PROTOCOLPGM(MSG_Y_MIN); SERIAL_PROTOCOLPGM(MSG_Y_MIN);
SERIAL_PROTOCOLLN(((READ(Y_MIN_PIN)^Y_ENDSTOPS_INVERTING)?MSG_ENDSTOP_HIT:MSG_ENDSTOP_OPEN)); SERIAL_PROTOCOLLN(((READ(Y_MIN_PIN)^Y_ENDSTOPS_INVERTING)?MSG_ENDSTOP_HIT:MSG_ENDSTOP_OPEN));
#endif #endif
#if (Y_MAX_PIN > -1) #if defined(Y_MAX_PIN) && Y_MAX_PIN > -1
SERIAL_PROTOCOLPGM(MSG_Y_MAX); SERIAL_PROTOCOLPGM(MSG_Y_MAX);
SERIAL_PROTOCOLLN(((READ(Y_MAX_PIN)^Y_ENDSTOPS_INVERTING)?MSG_ENDSTOP_HIT:MSG_ENDSTOP_OPEN)); SERIAL_PROTOCOLLN(((READ(Y_MAX_PIN)^Y_ENDSTOPS_INVERTING)?MSG_ENDSTOP_HIT:MSG_ENDSTOP_OPEN));
#endif #endif
#if (Z_MIN_PIN > -1) #if defined(Z_MIN_PIN) && Z_MIN_PIN > -1
SERIAL_PROTOCOLPGM(MSG_Z_MIN); SERIAL_PROTOCOLPGM(MSG_Z_MIN);
SERIAL_PROTOCOLLN(((READ(Z_MIN_PIN)^Z_ENDSTOPS_INVERTING)?MSG_ENDSTOP_HIT:MSG_ENDSTOP_OPEN)); SERIAL_PROTOCOLLN(((READ(Z_MIN_PIN)^Z_ENDSTOPS_INVERTING)?MSG_ENDSTOP_HIT:MSG_ENDSTOP_OPEN));
#endif #endif
#if (Z_MAX_PIN > -1) #if defined(Z_MAX_PIN) && Z_MAX_PIN > -1
SERIAL_PROTOCOLPGM(MSG_Z_MAX); SERIAL_PROTOCOLPGM(MSG_Z_MAX);
SERIAL_PROTOCOLLN(((READ(Z_MAX_PIN)^Z_ENDSTOPS_INVERTING)?MSG_ENDSTOP_HIT:MSG_ENDSTOP_OPEN)); SERIAL_PROTOCOLLN(((READ(Z_MAX_PIN)^Z_ENDSTOPS_INVERTING)?MSG_ENDSTOP_HIT:MSG_ENDSTOP_OPEN));
#endif #endif
break; break;
//TODO: update for all axis, use for loop //TODO: update for all axis, use for loop
case 201: // M201 case 201: // M201
for(int8_t i=0; i < NUM_AXIS; i++) for(int8_t i=0; i < NUM_AXIS; i++)
{ {
if(code_seen(axis_codes[i])) if(code_seen(axis_codes[i]))
{ {
@ -1321,7 +1566,7 @@ void process_commands()
} }
} }
// steps per sq second need to be updated to agree with the units per sq second (as they are what is used in the planner) // steps per sq second need to be updated to agree with the units per sq second (as they are what is used in the planner)
reset_acceleration_rates(); reset_acceleration_rates();
break; break;
#if 0 // Not used for Sprinter/grbl gen6 #if 0 // Not used for Sprinter/grbl gen6
case 202: // M202 case 202: // M202
@ -1352,7 +1597,7 @@ void process_commands()
} }
break; break;
case 206: // M206 additional homeing offset case 206: // M206 additional homeing offset
for(int8_t i=0; i < 3; i++) for(int8_t i=0; i < 3; i++)
{ {
if(code_seen(axis_codes[i])) add_homeing[i] = code_value(); if(code_seen(axis_codes[i])) add_homeing[i] = code_value();
} }
@ -1360,47 +1605,47 @@ void process_commands()
#ifdef FWRETRACT #ifdef FWRETRACT
case 207: //M207 - set retract length S[positive mm] F[feedrate mm/sec] Z[additional zlift/hop] case 207: //M207 - set retract length S[positive mm] F[feedrate mm/sec] Z[additional zlift/hop]
{ {
if(code_seen('S')) if(code_seen('S'))
{ {
retract_length = code_value() ; retract_length = code_value() ;
} }
if(code_seen('F')) if(code_seen('F'))
{ {
retract_feedrate = code_value() ; retract_feedrate = code_value() ;
} }
if(code_seen('Z')) if(code_seen('Z'))
{ {
retract_zlift = code_value() ; retract_zlift = code_value() ;
} }
}break; }break;
case 208: // M208 - set retract recover length S[positive mm surplus to the M207 S*] F[feedrate mm/sec] case 208: // M208 - set retract recover length S[positive mm surplus to the M207 S*] F[feedrate mm/sec]
{ {
if(code_seen('S')) if(code_seen('S'))
{ {
retract_recover_length = code_value() ; retract_recover_length = code_value() ;
} }
if(code_seen('F')) if(code_seen('F'))
{ {
retract_recover_feedrate = code_value() ; retract_recover_feedrate = code_value() ;
} }
}break; }break;
case 209: // M209 - S<1=true/0=false> enable automatic retract detect if the slicer did not support G10/11: every normal extrude-only move will be classified as retract depending on the direction. case 209: // M209 - S<1=true/0=false> enable automatic retract detect if the slicer did not support G10/11: every normal extrude-only move will be classified as retract depending on the direction.
{ {
if(code_seen('S')) if(code_seen('S'))
{ {
int t= code_value() ; int t= code_value() ;
switch(t) switch(t)
{ {
case 0: autoretract_enabled=false;retracted=false;break; case 0: autoretract_enabled=false;retracted=false;break;
case 1: autoretract_enabled=true;retracted=false;break; case 1: autoretract_enabled=true;retracted=false;break;
default: default:
SERIAL_ECHO_START; SERIAL_ECHO_START;
SERIAL_ECHOPGM(MSG_UNKNOWN_COMMAND); SERIAL_ECHOPGM(MSG_UNKNOWN_COMMAND);
SERIAL_ECHO(cmdbuffer[bufindr]); SERIAL_ECHO(cmdbuffer[bufindr]);
SERIAL_ECHOLNPGM("\""); SERIAL_ECHOLNPGM("\"");
} }
} }
}break; }break;
#endif // FWRETRACT #endif // FWRETRACT
#if EXTRUDERS > 1 #if EXTRUDERS > 1
@ -1409,7 +1654,7 @@ void process_commands()
if(setTargetedHotend(218)){ if(setTargetedHotend(218)){
break; break;
} }
if(code_seen('X')) if(code_seen('X'))
{ {
extruder_offset[X_AXIS][tmp_extruder] = code_value(); extruder_offset[X_AXIS][tmp_extruder] = code_value();
} }
@ -1419,7 +1664,7 @@ void process_commands()
} }
SERIAL_ECHO_START; SERIAL_ECHO_START;
SERIAL_ECHOPGM(MSG_HOTEND_OFFSET); SERIAL_ECHOPGM(MSG_HOTEND_OFFSET);
for(tmp_extruder = 0; tmp_extruder < EXTRUDERS; tmp_extruder++) for(tmp_extruder = 0; tmp_extruder < EXTRUDERS; tmp_extruder++)
{ {
SERIAL_ECHO(" "); SERIAL_ECHO(" ");
SERIAL_ECHO(extruder_offset[X_AXIS][tmp_extruder]); SERIAL_ECHO(extruder_offset[X_AXIS][tmp_extruder]);
@ -1431,7 +1676,7 @@ void process_commands()
#endif #endif
case 220: // M220 S<factor in percent>- set speed factor override percentage case 220: // M220 S<factor in percent>- set speed factor override percentage
{ {
if(code_seen('S')) if(code_seen('S'))
{ {
feedmultiply = code_value() ; feedmultiply = code_value() ;
} }
@ -1439,23 +1684,63 @@ void process_commands()
break; break;
case 221: // M221 S<factor in percent>- set extrude factor override percentage case 221: // M221 S<factor in percent>- set extrude factor override percentage
{ {
if(code_seen('S')) if(code_seen('S'))
{ {
extrudemultiply = code_value() ; extrudemultiply = code_value() ;
} }
} }
break; break;
#if defined(LARGE_FLASH) && LARGE_FLASH == true && defined(BEEPER) && BEEPER > -1 #if NUM_SERVOS > 0
case 280: // M280 - set servo position absolute. P: servo index, S: angle or microseconds
{
int servo_index = -1;
int servo_position = 0;
if (code_seen('P'))
servo_index = code_value();
if (code_seen('S')) {
servo_position = code_value();
if ((servo_index >= 0) && (servo_index < NUM_SERVOS)) {
servos[servo_index].write(servo_position);
}
else {
SERIAL_ECHO_START;
SERIAL_ECHO("Servo ");
SERIAL_ECHO(servo_index);
SERIAL_ECHOLN(" out of range");
}
}
else if (servo_index >= 0) {
SERIAL_PROTOCOL(MSG_OK);
SERIAL_PROTOCOL(" Servo ");
SERIAL_PROTOCOL(servo_index);
SERIAL_PROTOCOL(": ");
SERIAL_PROTOCOL(servos[servo_index].read());
SERIAL_PROTOCOLLN("");
}
}
break;
#endif // NUM_SERVOS > 0
#if LARGE_FLASH == true && ( BEEPER > 0 || defined(ULTRALCD) )
case 300: // M300 case 300: // M300
{ {
int beepS = 1; int beepS = code_seen('S') ? code_value() : 110;
int beepP = 1000; int beepP = code_seen('P') ? code_value() : 1000;
if(code_seen('S')) beepS = code_value(); if (beepS > 0)
if(code_seen('P')) beepP = code_value(); {
tone(BEEPER, beepS); #if BEEPER > 0
delay(beepP); tone(BEEPER, beepS);
noTone(BEEPER); delay(beepP);
noTone(BEEPER);
#elif defined(ULTRALCD)
lcd_buzz(beepS, beepP);
#endif
}
else
{
delay(beepP);
}
} }
break; break;
#endif // M300 #endif // M300
@ -1470,10 +1755,10 @@ void process_commands()
#ifdef PID_ADD_EXTRUSION_RATE #ifdef PID_ADD_EXTRUSION_RATE
if(code_seen('C')) Kc = code_value(); if(code_seen('C')) Kc = code_value();
#endif #endif
updatePID(); updatePID();
SERIAL_PROTOCOL(MSG_OK); SERIAL_PROTOCOL(MSG_OK);
SERIAL_PROTOCOL(" p:"); SERIAL_PROTOCOL(" p:");
SERIAL_PROTOCOL(Kp); SERIAL_PROTOCOL(Kp);
SERIAL_PROTOCOL(" i:"); SERIAL_PROTOCOL(" i:");
SERIAL_PROTOCOL(unscalePID_i(Ki)); SERIAL_PROTOCOL(unscalePID_i(Ki));
@ -1497,7 +1782,7 @@ void process_commands()
updatePID(); updatePID();
SERIAL_PROTOCOL(MSG_OK); SERIAL_PROTOCOL(MSG_OK);
SERIAL_PROTOCOL(" p:"); SERIAL_PROTOCOL(" p:");
SERIAL_PROTOCOL(bedKp); SERIAL_PROTOCOL(bedKp);
SERIAL_PROTOCOL(" i:"); SERIAL_PROTOCOL(" i:");
SERIAL_PROTOCOL(unscalePID_i(bedKi)); SERIAL_PROTOCOL(unscalePID_i(bedKi));
@ -1509,8 +1794,7 @@ void process_commands()
#endif //PIDTEMP #endif //PIDTEMP
case 240: // M240 Triggers a camera by emulating a Canon RC-1 : http://www.doc-diy.net/photo/rc-1_hacked/ case 240: // M240 Triggers a camera by emulating a Canon RC-1 : http://www.doc-diy.net/photo/rc-1_hacked/
{ {
#ifdef PHOTOGRAPH_PIN #if defined(PHOTOGRAPH_PIN) && PHOTOGRAPH_PIN > -1
#if (PHOTOGRAPH_PIN > -1)
const uint8_t NUM_PULSES=16; const uint8_t NUM_PULSES=16;
const float PULSE_LENGTH=0.01524; const float PULSE_LENGTH=0.01524;
for(int i=0; i < NUM_PULSES; i++) { for(int i=0; i < NUM_PULSES; i++) {
@ -1526,24 +1810,38 @@ void process_commands()
WRITE(PHOTOGRAPH_PIN, LOW); WRITE(PHOTOGRAPH_PIN, LOW);
_delay_ms(PULSE_LENGTH); _delay_ms(PULSE_LENGTH);
} }
#endif
#endif #endif
} }
break; break;
#ifdef DOGLCD
case 302: // allow cold extrudes case 250: // M250 Set LCD contrast value: C<value> (value 0..63)
{
if (code_seen('C')) {
lcd_setcontrast( ((int)code_value())&63 );
}
SERIAL_PROTOCOLPGM("lcd contrast value: ");
SERIAL_PROTOCOL(lcd_contrast);
SERIAL_PROTOCOLLN("");
}
break;
#endif
#ifdef PREVENT_DANGEROUS_EXTRUDE
case 302: // allow cold extrudes, or set the minimum extrude temperature
{ {
allow_cold_extrudes(true); float temp = .0;
if (code_seen('S')) temp=code_value();
set_extrude_min_temp(temp);
} }
break; break;
#endif
case 303: // M303 PID autotune case 303: // M303 PID autotune
{ {
float temp = 150.0; float temp = 150.0;
int e=0; int e=0;
int c=5; int c=5;
if (code_seen('E')) e=code_value(); if (code_seen('E')) e=code_value();
if (e<0) if (e<0)
temp=70; temp=70;
if (code_seen('S')) temp=code_value(); if (code_seen('S')) temp=code_value();
if (code_seen('C')) c=code_value(); if (code_seen('C')) c=code_value();
PID_autotune(temp, e, c); PID_autotune(temp, e, c);
@ -1595,7 +1893,7 @@ void process_commands()
lastpos[Z_AXIS]=current_position[Z_AXIS]; lastpos[Z_AXIS]=current_position[Z_AXIS];
lastpos[E_AXIS]=current_position[E_AXIS]; lastpos[E_AXIS]=current_position[E_AXIS];
//retract by E //retract by E
if(code_seen('E')) if(code_seen('E'))
{ {
target[E_AXIS]+= code_value(); target[E_AXIS]+= code_value();
} }
@ -1606,9 +1904,9 @@ void process_commands()
#endif #endif
} }
plan_buffer_line(target[X_AXIS], target[Y_AXIS], target[Z_AXIS], target[E_AXIS], feedrate/60, active_extruder); plan_buffer_line(target[X_AXIS], target[Y_AXIS], target[Z_AXIS], target[E_AXIS], feedrate/60, active_extruder);
//lift Z //lift Z
if(code_seen('Z')) if(code_seen('Z'))
{ {
target[Z_AXIS]+= code_value(); target[Z_AXIS]+= code_value();
} }
@ -1619,9 +1917,9 @@ void process_commands()
#endif #endif
} }
plan_buffer_line(target[X_AXIS], target[Y_AXIS], target[Z_AXIS], target[E_AXIS], feedrate/60, active_extruder); plan_buffer_line(target[X_AXIS], target[Y_AXIS], target[Z_AXIS], target[E_AXIS], feedrate/60, active_extruder);
//move xy //move xy
if(code_seen('X')) if(code_seen('X'))
{ {
target[X_AXIS]+= code_value(); target[X_AXIS]+= code_value();
} }
@ -1631,7 +1929,7 @@ void process_commands()
target[X_AXIS]= FILAMENTCHANGE_XPOS ; target[X_AXIS]= FILAMENTCHANGE_XPOS ;
#endif #endif
} }
if(code_seen('Y')) if(code_seen('Y'))
{ {
target[Y_AXIS]= code_value(); target[Y_AXIS]= code_value();
} }
@ -1641,9 +1939,9 @@ void process_commands()
target[Y_AXIS]= FILAMENTCHANGE_YPOS ; target[Y_AXIS]= FILAMENTCHANGE_YPOS ;
#endif #endif
} }
plan_buffer_line(target[X_AXIS], target[Y_AXIS], target[Z_AXIS], target[E_AXIS], feedrate/60, active_extruder); plan_buffer_line(target[X_AXIS], target[Y_AXIS], target[Z_AXIS], target[E_AXIS], feedrate/60, active_extruder);
if(code_seen('L')) if(code_seen('L'))
{ {
target[E_AXIS]+= code_value(); target[E_AXIS]+= code_value();
@ -1654,9 +1952,9 @@ void process_commands()
target[E_AXIS]+= FILAMENTCHANGE_FINALRETRACT ; target[E_AXIS]+= FILAMENTCHANGE_FINALRETRACT ;
#endif #endif
} }
plan_buffer_line(target[X_AXIS], target[Y_AXIS], target[Z_AXIS], target[E_AXIS], feedrate/60, active_extruder); plan_buffer_line(target[X_AXIS], target[Y_AXIS], target[Z_AXIS], target[E_AXIS], feedrate/60, active_extruder);
//finish moves //finish moves
st_synchronize(); st_synchronize();
//disable extruder steppers so filament can be removed //disable extruder steppers so filament can be removed
@ -1666,27 +1964,28 @@ void process_commands()
delay(100); delay(100);
LCD_ALERTMESSAGEPGM(MSG_FILAMENTCHANGE); LCD_ALERTMESSAGEPGM(MSG_FILAMENTCHANGE);
uint8_t cnt=0; uint8_t cnt=0;
while(!LCD_CLICKED){ while(!lcd_clicked()){
cnt++; cnt++;
manage_heater(); manage_heater();
manage_inactivity(); manage_inactivity();
lcd_update(); lcd_update();
#if BEEPER > -1
if(cnt==0) if(cnt==0)
{ {
#if BEEPER > 0
SET_OUTPUT(BEEPER); SET_OUTPUT(BEEPER);
WRITE(BEEPER,HIGH); WRITE(BEEPER,HIGH);
delay(3); delay(3);
WRITE(BEEPER,LOW); WRITE(BEEPER,LOW);
delay(3); delay(3);
} #else
lcd_buzz(1000/6,100);
#endif #endif
}
} }
//return to normal //return to normal
if(code_seen('L')) if(code_seen('L'))
{ {
target[E_AXIS]+= -code_value(); target[E_AXIS]+= -code_value();
} }
@ -1704,10 +2003,10 @@ void process_commands()
plan_buffer_line(lastpos[X_AXIS], lastpos[Y_AXIS], lastpos[Z_AXIS], lastpos[E_AXIS], feedrate/60, active_extruder); //final untretract plan_buffer_line(lastpos[X_AXIS], lastpos[Y_AXIS], lastpos[Z_AXIS], lastpos[E_AXIS], feedrate/60, active_extruder); //final untretract
} }
break; break;
#endif //FILAMENTCHANGEENABLE #endif //FILAMENTCHANGEENABLE
case 907: // M907 Set digital trimpot motor current using axis codes. case 907: // M907 Set digital trimpot motor current using axis codes.
{ {
#if DIGIPOTSS_PIN > -1 #if defined(DIGIPOTSS_PIN) && DIGIPOTSS_PIN > -1
for(int i=0;i<NUM_AXIS;i++) if(code_seen(axis_codes[i])) digipot_current(i,code_value()); for(int i=0;i<NUM_AXIS;i++) if(code_seen(axis_codes[i])) digipot_current(i,code_value());
if(code_seen('B')) digipot_current(4,code_value()); if(code_seen('B')) digipot_current(4,code_value());
if(code_seen('S')) for(int i=0;i<=4;i++) digipot_current(i,code_value()); if(code_seen('S')) for(int i=0;i<=4;i++) digipot_current(i,code_value());
@ -1716,7 +2015,7 @@ void process_commands()
break; break;
case 908: // M908 Control digital trimpot directly. case 908: // M908 Control digital trimpot directly.
{ {
#if DIGIPOTSS_PIN > -1 #if defined(DIGIPOTSS_PIN) && DIGIPOTSS_PIN > -1
uint8_t channel,current; uint8_t channel,current;
if(code_seen('P')) channel=code_value(); if(code_seen('P')) channel=code_value();
if(code_seen('S')) current=code_value(); if(code_seen('S')) current=code_value();
@ -1726,8 +2025,8 @@ void process_commands()
break; break;
case 350: // M350 Set microstepping mode. Warning: Steps per unit remains unchanged. S code sets stepping mode for all drivers. case 350: // M350 Set microstepping mode. Warning: Steps per unit remains unchanged. S code sets stepping mode for all drivers.
{ {
#if X_MS1_PIN > -1 #if defined(X_MS1_PIN) && X_MS1_PIN > -1
if(code_seen('S')) for(int i=0;i<=4;i++) microstep_mode(i,code_value()); if(code_seen('S')) for(int i=0;i<=4;i++) microstep_mode(i,code_value());
for(int i=0;i<NUM_AXIS;i++) if(code_seen(axis_codes[i])) microstep_mode(i,(uint8_t)code_value()); for(int i=0;i<NUM_AXIS;i++) if(code_seen(axis_codes[i])) microstep_mode(i,(uint8_t)code_value());
if(code_seen('B')) microstep_mode(4,code_value()); if(code_seen('B')) microstep_mode(4,code_value());
microstep_readings(); microstep_readings();
@ -1736,7 +2035,7 @@ void process_commands()
break; break;
case 351: // M351 Toggle MS1 MS2 pins directly, S# determines MS1 or MS2, X# sets the pin high/low. case 351: // M351 Toggle MS1 MS2 pins directly, S# determines MS1 or MS2, X# sets the pin high/low.
{ {
#if X_MS1_PIN > -1 #if defined(X_MS1_PIN) && X_MS1_PIN > -1
if(code_seen('S')) switch((int)code_value()) if(code_seen('S')) switch((int)code_value())
{ {
case 1: case 1:
@ -1761,7 +2060,7 @@ void process_commands()
} }
} }
else if(code_seen('T')) else if(code_seen('T'))
{ {
tmp_extruder = code_value(); tmp_extruder = code_value();
if(tmp_extruder >= EXTRUDERS) { if(tmp_extruder >= EXTRUDERS) {
@ -1783,15 +2082,30 @@ void process_commands()
if(tmp_extruder != active_extruder) { if(tmp_extruder != active_extruder) {
// Save current position to return to after applying extruder offset // Save current position to return to after applying extruder offset
memcpy(destination, current_position, sizeof(destination)); memcpy(destination, current_position, sizeof(destination));
#ifdef DUAL_X_CARRIAGE
// only apply Y extruder offset in dual x carriage mode (x offset is already used in determining home pos)
current_position[Y_AXIS] = current_position[Y_AXIS] -
extruder_offset[Y_AXIS][active_extruder] +
extruder_offset[Y_AXIS][tmp_extruder];
float tmp_x_pos = current_position[X_AXIS];
// Set the new active extruder and position
active_extruder = tmp_extruder;
axis_is_at_home(X_AXIS); //this function updates X min/max values.
current_position[X_AXIS] = inactive_x_carriage_pos;
inactive_x_carriage_pos = tmp_x_pos;
#else
// Offset extruder (only by XY) // Offset extruder (only by XY)
int i; int i;
for(i = 0; i < 2; i++) { for(i = 0; i < 2; i++) {
current_position[i] = current_position[i] - current_position[i] = current_position[i] -
extruder_offset[i][active_extruder] + extruder_offset[i][active_extruder] +
extruder_offset[i][tmp_extruder]; extruder_offset[i][tmp_extruder];
} }
// Set the new active extruder and position // Set the new active extruder and position
active_extruder = tmp_extruder; active_extruder = tmp_extruder;
#endif //else DUAL_X_CARRIAGE
plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]); plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
// Move to the old position if 'F' was in the parameters // Move to the old position if 'F' was in the parameters
if(make_move && Stopped == false) { if(make_move && Stopped == false) {
@ -1832,14 +2146,14 @@ void ClearToSend()
if(fromsd[bufindr]) if(fromsd[bufindr])
return; return;
#endif //SDSUPPORT #endif //SDSUPPORT
SERIAL_PROTOCOLLNPGM(MSG_OK); SERIAL_PROTOCOLLNPGM(MSG_OK);
} }
void get_coordinates() void get_coordinates()
{ {
bool seen[4]={false,false,false,false}; bool seen[4]={false,false,false,false};
for(int8_t i=0; i < NUM_AXIS; i++) { for(int8_t i=0; i < NUM_AXIS; i++) {
if(code_seen(axis_codes[i])) if(code_seen(axis_codes[i]))
{ {
destination[i] = (float)code_value() + (axis_relative_modes[i] || relative_mode)*current_position[i]; destination[i] = (float)code_value() + (axis_relative_modes[i] || relative_mode)*current_position[i];
seen[i]=true; seen[i]=true;
@ -1857,23 +2171,23 @@ void get_coordinates()
float echange=destination[E_AXIS]-current_position[E_AXIS]; float echange=destination[E_AXIS]-current_position[E_AXIS];
if(echange<-MIN_RETRACT) //retract if(echange<-MIN_RETRACT) //retract
{ {
if(!retracted) if(!retracted)
{ {
destination[Z_AXIS]+=retract_zlift; //not sure why chaninging current_position negatively does not work. destination[Z_AXIS]+=retract_zlift; //not sure why chaninging current_position negatively does not work.
//if slicer retracted by echange=-1mm and you want to retract 3mm, corrrectede=-2mm additionally //if slicer retracted by echange=-1mm and you want to retract 3mm, corrrectede=-2mm additionally
float correctede=-echange-retract_length; float correctede=-echange-retract_length;
//to generate the additional steps, not the destination is changed, but inversely the current position //to generate the additional steps, not the destination is changed, but inversely the current position
current_position[E_AXIS]+=-correctede; current_position[E_AXIS]+=-correctede;
feedrate=retract_feedrate; feedrate=retract_feedrate;
retracted=true; retracted=true;
} }
} }
else else
if(echange>MIN_RETRACT) //retract_recover if(echange>MIN_RETRACT) //retract_recover
{ {
if(retracted) if(retracted)
{ {
//current_position[Z_AXIS]+=-retract_zlift; //current_position[Z_AXIS]+=-retract_zlift;
//if slicer retracted_recovered by echange=+1mm and you want to retract_recover 3mm, corrrectede=2mm additionally //if slicer retracted_recovered by echange=+1mm and you want to retract_recover 3mm, corrrectede=2mm additionally
@ -1883,7 +2197,7 @@ void get_coordinates()
retracted=false; retracted=false;
} }
} }
} }
#endif //FWRETRACT #endif //FWRETRACT
} }
@ -1901,7 +2215,7 @@ void get_arc_coordinates()
if(code_seen('I')) { if(code_seen('I')) {
offset[0] = code_value(); offset[0] = code_value();
} }
else { else {
offset[0] = 0.0; offset[0] = 0.0;
} }
@ -1928,11 +2242,64 @@ void clamp_to_software_endstops(float target[3])
} }
} }
#ifdef DELTA
void calculate_delta(float cartesian[3])
{
delta[X_AXIS] = sqrt(sq(DELTA_DIAGONAL_ROD)
- sq(DELTA_TOWER1_X-cartesian[X_AXIS])
- sq(DELTA_TOWER1_Y-cartesian[Y_AXIS])
) + cartesian[Z_AXIS];
delta[Y_AXIS] = sqrt(sq(DELTA_DIAGONAL_ROD)
- sq(DELTA_TOWER2_X-cartesian[X_AXIS])
- sq(DELTA_TOWER2_Y-cartesian[Y_AXIS])
) + cartesian[Z_AXIS];
delta[Z_AXIS] = sqrt(sq(DELTA_DIAGONAL_ROD)
- sq(DELTA_TOWER3_X-cartesian[X_AXIS])
- sq(DELTA_TOWER3_Y-cartesian[Y_AXIS])
) + cartesian[Z_AXIS];
/*
SERIAL_ECHOPGM("cartesian x="); SERIAL_ECHO(cartesian[X_AXIS]);
SERIAL_ECHOPGM(" y="); SERIAL_ECHO(cartesian[Y_AXIS]);
SERIAL_ECHOPGM(" z="); SERIAL_ECHOLN(cartesian[Z_AXIS]);
SERIAL_ECHOPGM("delta x="); SERIAL_ECHO(delta[X_AXIS]);
SERIAL_ECHOPGM(" y="); SERIAL_ECHO(delta[Y_AXIS]);
SERIAL_ECHOPGM(" z="); SERIAL_ECHOLN(delta[Z_AXIS]);
*/
}
#endif
void prepare_move() void prepare_move()
{ {
clamp_to_software_endstops(destination); clamp_to_software_endstops(destination);
previous_millis_cmd = millis(); previous_millis_cmd = millis();
#ifdef DELTA
float difference[NUM_AXIS];
for (int8_t i=0; i < NUM_AXIS; i++) {
difference[i] = destination[i] - current_position[i];
}
float cartesian_mm = sqrt(sq(difference[X_AXIS]) +
sq(difference[Y_AXIS]) +
sq(difference[Z_AXIS]));
if (cartesian_mm < 0.000001) { cartesian_mm = abs(difference[E_AXIS]); }
if (cartesian_mm < 0.000001) { return; }
float seconds = 6000 * cartesian_mm / feedrate / feedmultiply;
int steps = max(1, int(DELTA_SEGMENTS_PER_SECOND * seconds));
// SERIAL_ECHOPGM("mm="); SERIAL_ECHO(cartesian_mm);
// SERIAL_ECHOPGM(" seconds="); SERIAL_ECHO(seconds);
// SERIAL_ECHOPGM(" steps="); SERIAL_ECHOLN(steps);
for (int s = 1; s <= steps; s++) {
float fraction = float(s) / float(steps);
for(int8_t i=0; i < NUM_AXIS; i++) {
destination[i] = current_position[i] + difference[i] * fraction;
}
calculate_delta(destination);
plan_buffer_line(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS],
destination[E_AXIS], feedrate*feedmultiply/60/100.0,
active_extruder);
}
#else
// Do not use feedmultiply for E or Z only moves // Do not use feedmultiply for E or Z only moves
if( (current_position[X_AXIS] == destination [X_AXIS]) && (current_position[Y_AXIS] == destination [Y_AXIS])) { if( (current_position[X_AXIS] == destination [X_AXIS]) && (current_position[Y_AXIS] == destination [Y_AXIS])) {
plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder); plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate/60, active_extruder);
@ -1940,6 +2307,7 @@ void prepare_move()
else { else {
plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate*feedmultiply/60/100.0, active_extruder); plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], feedrate*feedmultiply/60/100.0, active_extruder);
} }
#endif
for(int8_t i=0; i < NUM_AXIS; i++) { for(int8_t i=0; i < NUM_AXIS; i++) {
current_position[i] = destination[i]; current_position[i] = destination[i];
} }
@ -1950,7 +2318,7 @@ void prepare_arc_move(char isclockwise) {
// Trace the arc // Trace the arc
mc_arc(current_position, destination, offset, X_AXIS, Y_AXIS, Z_AXIS, feedrate*feedmultiply/60/100.0, r, isclockwise, active_extruder); mc_arc(current_position, destination, offset, X_AXIS, Y_AXIS, Z_AXIS, feedrate*feedmultiply/60/100.0, r, isclockwise, active_extruder);
// As far as the parser is concerned, the position is now == target. In reality the // As far as the parser is concerned, the position is now == target. In reality the
// motion control system might still be processing the action and the real tool position // motion control system might still be processing the action and the real tool position
// in any intermediate location. // in any intermediate location.
@ -1960,7 +2328,14 @@ void prepare_arc_move(char isclockwise) {
previous_millis_cmd = millis(); previous_millis_cmd = millis();
} }
#ifdef CONTROLLERFAN_PIN #if defined(CONTROLLERFAN_PIN) && CONTROLLERFAN_PIN > -1
#if defined(FAN_PIN)
#if CONTROLLERFAN_PIN == FAN_PIN
#error "You cannot set CONTROLLERFAN_PIN equal to FAN_PIN"
#endif
#endif
unsigned long lastMotor = 0; //Save the time for when a motor was turned on last unsigned long lastMotor = 0; //Save the time for when a motor was turned on last
unsigned long lastMotorCheck = 0; unsigned long lastMotorCheck = 0;
@ -1969,59 +2344,44 @@ void controllerFan()
if ((millis() - lastMotorCheck) >= 2500) //Not a time critical function, so we only check every 2500ms if ((millis() - lastMotorCheck) >= 2500) //Not a time critical function, so we only check every 2500ms
{ {
lastMotorCheck = millis(); lastMotorCheck = millis();
if(!READ(X_ENABLE_PIN) || !READ(Y_ENABLE_PIN) || !READ(Z_ENABLE_PIN) if(!READ(X_ENABLE_PIN) || !READ(Y_ENABLE_PIN) || !READ(Z_ENABLE_PIN)
#if EXTRUDERS > 2 #if EXTRUDERS > 2
|| !READ(E2_ENABLE_PIN) || !READ(E2_ENABLE_PIN)
#endif #endif
#if EXTRUDER > 1 #if EXTRUDER > 1
#if defined(X2_ENABLE_PIN) && X2_ENABLE_PIN > -1
|| !READ(X2_ENABLE_PIN)
#endif
|| !READ(E1_ENABLE_PIN) || !READ(E1_ENABLE_PIN)
#endif #endif
|| !READ(E0_ENABLE_PIN)) //If any of the drivers are enabled... || !READ(E0_ENABLE_PIN)) //If any of the drivers are enabled...
{ {
lastMotor = millis(); //... set time to NOW so the fan will turn on lastMotor = millis(); //... set time to NOW so the fan will turn on
} }
if ((millis() - lastMotor) >= (CONTROLLERFAN_SEC*1000UL) || lastMotor == 0) //If the last time any driver was enabled, is longer since than CONTROLLERSEC... if ((millis() - lastMotor) >= (CONTROLLERFAN_SECS*1000UL) || lastMotor == 0) //If the last time any driver was enabled, is longer since than CONTROLLERSEC...
{ {
WRITE(CONTROLLERFAN_PIN, LOW); //... turn the fan off digitalWrite(CONTROLLERFAN_PIN, 0);
analogWrite(CONTROLLERFAN_PIN, 0);
} }
else else
{ {
WRITE(CONTROLLERFAN_PIN, HIGH); //... turn the fan on // allows digital or PWM fan output to be used (see M42 handling)
digitalWrite(CONTROLLERFAN_PIN, CONTROLLERFAN_SPEED);
analogWrite(CONTROLLERFAN_PIN, CONTROLLERFAN_SPEED);
} }
} }
} }
#endif #endif
#ifdef EXTRUDERFAN_PIN void manage_inactivity()
unsigned long lastExtruderCheck = 0;
void extruderFan()
{ {
if ((millis() - lastExtruderCheck) >= 2500) //Not a time critical function, so we only check every 2500ms if( (millis() - previous_millis_cmd) > max_inactive_time )
{ if(max_inactive_time)
lastExtruderCheck = millis(); kill();
if (degHotend(active_extruder) < EXTRUDERFAN_DEC)
{
WRITE(EXTRUDERFAN_PIN, LOW); //... turn the fan off
}
else
{
WRITE(EXTRUDERFAN_PIN, HIGH); //... turn the fan on
}
}
}
#endif
void manage_inactivity()
{
if( (millis() - previous_millis_cmd) > max_inactive_time )
if(max_inactive_time)
kill();
if(stepper_inactive_time) { if(stepper_inactive_time) {
if( (millis() - previous_millis_cmd) > stepper_inactive_time ) if( (millis() - previous_millis_cmd) > stepper_inactive_time )
{ {
if(blocks_queued() == false) { if(blocks_queued() == false) {
disable_x(); disable_x();
@ -2033,23 +2393,23 @@ void manage_inactivity()
} }
} }
} }
#if( KILL_PIN>-1 ) #if defined(KILL_PIN) && KILL_PIN > -1
if( 0 == READ(KILL_PIN) ) if( 0 == READ(KILL_PIN) )
kill(); kill();
#endif #endif
#ifdef CONTROLLERFAN_PIN #if defined(CONTROLLERFAN_PIN) && CONTROLLERFAN_PIN > -1
controllerFan(); //Check if fan should be turned on to cool stepper drivers down controllerFan(); //Check if fan should be turned on to cool stepper drivers down
#endif #endif
#ifdef EXTRUDER_RUNOUT_PREVENT #ifdef EXTRUDER_RUNOUT_PREVENT
if( (millis() - previous_millis_cmd) > EXTRUDER_RUNOUT_SECONDS*1000 ) if( (millis() - previous_millis_cmd) > EXTRUDER_RUNOUT_SECONDS*1000 )
if(degHotend(active_extruder)>EXTRUDER_RUNOUT_MINTEMP) if(degHotend(active_extruder)>EXTRUDER_RUNOUT_MINTEMP)
{ {
bool oldstatus=READ(E0_ENABLE_PIN); bool oldstatus=READ(E0_ENABLE_PIN);
enable_e0(); enable_e0();
float oldepos=current_position[E_AXIS]; float oldepos=current_position[E_AXIS];
float oldedes=destination[E_AXIS]; float oldedes=destination[E_AXIS];
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS],
current_position[E_AXIS]+EXTRUDER_RUNOUT_EXTRUDE*EXTRUDER_RUNOUT_ESTEPS/axis_steps_per_unit[E_AXIS], current_position[E_AXIS]+EXTRUDER_RUNOUT_EXTRUDE*EXTRUDER_RUNOUT_ESTEPS/axis_steps_per_unit[E_AXIS],
EXTRUDER_RUNOUT_SPEED/60.*EXTRUDER_RUNOUT_ESTEPS/axis_steps_per_unit[E_AXIS], active_extruder); EXTRUDER_RUNOUT_SPEED/60.*EXTRUDER_RUNOUT_ESTEPS/axis_steps_per_unit[E_AXIS], active_extruder);
current_position[E_AXIS]=oldepos; current_position[E_AXIS]=oldepos;
destination[E_AXIS]=oldedes; destination[E_AXIS]=oldedes;
@ -2073,8 +2433,10 @@ void kill()
disable_e0(); disable_e0();
disable_e1(); disable_e1();
disable_e2(); disable_e2();
if(PS_ON_PIN > -1) pinMode(PS_ON_PIN,INPUT); #if defined(PS_ON_PIN) && PS_ON_PIN > -1
pinMode(PS_ON_PIN,INPUT);
#endif
SERIAL_ERROR_START; SERIAL_ERROR_START;
SERIAL_ERRORLNPGM(MSG_ERR_KILLED); SERIAL_ERRORLNPGM(MSG_ERR_KILLED);
LCD_ALERTMESSAGEPGM(MSG_KILLED); LCD_ALERTMESSAGEPGM(MSG_KILLED);
@ -2102,7 +2464,7 @@ void setPwmFrequency(uint8_t pin, int val)
val &= 0x07; val &= 0x07;
switch(digitalPinToTimer(pin)) switch(digitalPinToTimer(pin))
{ {
#if defined(TCCR0A) #if defined(TCCR0A)
case TIMER0A: case TIMER0A:
case TIMER0B: case TIMER0B:
@ -2144,7 +2506,7 @@ void setPwmFrequency(uint8_t pin, int val)
break; break;
#endif #endif
#if defined(TCCR4A) #if defined(TCCR4A)
case TIMER4A: case TIMER4A:
case TIMER4B: case TIMER4B:
case TIMER4C: case TIMER4C:
@ -2153,7 +2515,7 @@ void setPwmFrequency(uint8_t pin, int val)
break; break;
#endif #endif
#if defined(TCCR5A) #if defined(TCCR5A)
case TIMER5A: case TIMER5A:
case TIMER5B: case TIMER5B:
case TIMER5C: case TIMER5C:
@ -2192,3 +2554,4 @@ bool setTargetedHotend(int code){
} }
return false; return false;
} }

341
Marlin/Servo.cpp Normal file
View file

@ -0,0 +1,341 @@
/*
Servo.cpp - Interrupt driven Servo library for Arduino using 16 bit timers- Version 2
Copyright (c) 2009 Michael Margolis. All right reserved.
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/*
A servo is activated by creating an instance of the Servo class passing the desired pin to the attach() method.
The servos are pulsed in the background using the value most recently written using the write() method
Note that analogWrite of PWM on pins associated with the timer are disabled when the first servo is attached.
Timers are seized as needed in groups of 12 servos - 24 servos use two timers, 48 servos will use four.
The methods are:
Servo - Class for manipulating servo motors connected to Arduino pins.
attach(pin ) - Attaches a servo motor to an i/o pin.
attach(pin, min, max ) - Attaches to a pin setting min and max values in microseconds
default min is 544, max is 2400
write() - Sets the servo angle in degrees. (invalid angle that is valid as pulse in microseconds is treated as microseconds)
writeMicroseconds() - Sets the servo pulse width in microseconds
read() - Gets the last written servo pulse width as an angle between 0 and 180.
readMicroseconds() - Gets the last written servo pulse width in microseconds. (was read_us() in first release)
attached() - Returns true if there is a servo attached.
detach() - Stops an attached servos from pulsing its i/o pin.
*/
#include "Configuration.h"
#ifdef NUM_SERVOS
#include <avr/interrupt.h>
#include <Arduino.h>
#include "Servo.h"
#define usToTicks(_us) (( clockCyclesPerMicrosecond()* _us) / 8) // converts microseconds to tick (assumes prescale of 8) // 12 Aug 2009
#define ticksToUs(_ticks) (( (unsigned)_ticks * 8)/ clockCyclesPerMicrosecond() ) // converts from ticks back to microseconds
#define TRIM_DURATION 2 // compensation ticks to trim adjust for digitalWrite delays // 12 August 2009
//#define NBR_TIMERS (MAX_SERVOS / SERVOS_PER_TIMER)
static servo_t servos[MAX_SERVOS]; // static array of servo structures
static volatile int8_t Channel[_Nbr_16timers ]; // counter for the servo being pulsed for each timer (or -1 if refresh interval)
uint8_t ServoCount = 0; // the total number of attached servos
// convenience macros
#define SERVO_INDEX_TO_TIMER(_servo_nbr) ((timer16_Sequence_t)(_servo_nbr / SERVOS_PER_TIMER)) // returns the timer controlling this servo
#define SERVO_INDEX_TO_CHANNEL(_servo_nbr) (_servo_nbr % SERVOS_PER_TIMER) // returns the index of the servo on this timer
#define SERVO_INDEX(_timer,_channel) ((_timer*SERVOS_PER_TIMER) + _channel) // macro to access servo index by timer and channel
#define SERVO(_timer,_channel) (servos[SERVO_INDEX(_timer,_channel)]) // macro to access servo class by timer and channel
#define SERVO_MIN() (MIN_PULSE_WIDTH - this->min * 4) // minimum value in uS for this servo
#define SERVO_MAX() (MAX_PULSE_WIDTH - this->max * 4) // maximum value in uS for this servo
/************ static functions common to all instances ***********************/
static inline void handle_interrupts(timer16_Sequence_t timer, volatile uint16_t *TCNTn, volatile uint16_t* OCRnA)
{
if( Channel[timer] < 0 )
*TCNTn = 0; // channel set to -1 indicated that refresh interval completed so reset the timer
else{
if( SERVO_INDEX(timer,Channel[timer]) < ServoCount && SERVO(timer,Channel[timer]).Pin.isActive == true )
digitalWrite( SERVO(timer,Channel[timer]).Pin.nbr,LOW); // pulse this channel low if activated
}
Channel[timer]++; // increment to the next channel
if( SERVO_INDEX(timer,Channel[timer]) < ServoCount && Channel[timer] < SERVOS_PER_TIMER) {
*OCRnA = *TCNTn + SERVO(timer,Channel[timer]).ticks;
if(SERVO(timer,Channel[timer]).Pin.isActive == true) // check if activated
digitalWrite( SERVO(timer,Channel[timer]).Pin.nbr,HIGH); // its an active channel so pulse it high
}
else {
// finished all channels so wait for the refresh period to expire before starting over
if( ((unsigned)*TCNTn) + 4 < usToTicks(REFRESH_INTERVAL) ) // allow a few ticks to ensure the next OCR1A not missed
*OCRnA = (unsigned int)usToTicks(REFRESH_INTERVAL);
else
*OCRnA = *TCNTn + 4; // at least REFRESH_INTERVAL has elapsed
Channel[timer] = -1; // this will get incremented at the end of the refresh period to start again at the first channel
}
}
#ifndef WIRING // Wiring pre-defines signal handlers so don't define any if compiling for the Wiring platform
// Interrupt handlers for Arduino
#if defined(_useTimer1)
SIGNAL (TIMER1_COMPA_vect)
{
handle_interrupts(_timer1, &TCNT1, &OCR1A);
}
#endif
#if defined(_useTimer3)
SIGNAL (TIMER3_COMPA_vect)
{
handle_interrupts(_timer3, &TCNT3, &OCR3A);
}
#endif
#if defined(_useTimer4)
SIGNAL (TIMER4_COMPA_vect)
{
handle_interrupts(_timer4, &TCNT4, &OCR4A);
}
#endif
#if defined(_useTimer5)
SIGNAL (TIMER5_COMPA_vect)
{
handle_interrupts(_timer5, &TCNT5, &OCR5A);
}
#endif
#elif defined WIRING
// Interrupt handlers for Wiring
#if defined(_useTimer1)
void Timer1Service()
{
handle_interrupts(_timer1, &TCNT1, &OCR1A);
}
#endif
#if defined(_useTimer3)
void Timer3Service()
{
handle_interrupts(_timer3, &TCNT3, &OCR3A);
}
#endif
#endif
static void initISR(timer16_Sequence_t timer)
{
#if defined (_useTimer1)
if(timer == _timer1) {
TCCR1A = 0; // normal counting mode
TCCR1B = _BV(CS11); // set prescaler of 8
TCNT1 = 0; // clear the timer count
#if defined(__AVR_ATmega8__)|| defined(__AVR_ATmega128__)
TIFR |= _BV(OCF1A); // clear any pending interrupts;
TIMSK |= _BV(OCIE1A) ; // enable the output compare interrupt
#else
// here if not ATmega8 or ATmega128
TIFR1 |= _BV(OCF1A); // clear any pending interrupts;
TIMSK1 |= _BV(OCIE1A) ; // enable the output compare interrupt
#endif
#if defined(WIRING)
timerAttach(TIMER1OUTCOMPAREA_INT, Timer1Service);
#endif
}
#endif
#if defined (_useTimer3)
if(timer == _timer3) {
TCCR3A = 0; // normal counting mode
TCCR3B = _BV(CS31); // set prescaler of 8
TCNT3 = 0; // clear the timer count
#if defined(__AVR_ATmega128__)
TIFR |= _BV(OCF3A); // clear any pending interrupts;
ETIMSK |= _BV(OCIE3A); // enable the output compare interrupt
#else
TIFR3 = _BV(OCF3A); // clear any pending interrupts;
TIMSK3 = _BV(OCIE3A) ; // enable the output compare interrupt
#endif
#if defined(WIRING)
timerAttach(TIMER3OUTCOMPAREA_INT, Timer3Service); // for Wiring platform only
#endif
}
#endif
#if defined (_useTimer4)
if(timer == _timer4) {
TCCR4A = 0; // normal counting mode
TCCR4B = _BV(CS41); // set prescaler of 8
TCNT4 = 0; // clear the timer count
TIFR4 = _BV(OCF4A); // clear any pending interrupts;
TIMSK4 = _BV(OCIE4A) ; // enable the output compare interrupt
}
#endif
#if defined (_useTimer5)
if(timer == _timer5) {
TCCR5A = 0; // normal counting mode
TCCR5B = _BV(CS51); // set prescaler of 8
TCNT5 = 0; // clear the timer count
TIFR5 = _BV(OCF5A); // clear any pending interrupts;
TIMSK5 = _BV(OCIE5A) ; // enable the output compare interrupt
}
#endif
}
static void finISR(timer16_Sequence_t timer)
{
//disable use of the given timer
#if defined WIRING // Wiring
if(timer == _timer1) {
#if defined(__AVR_ATmega1281__)||defined(__AVR_ATmega2561__)
TIMSK1 &= ~_BV(OCIE1A) ; // disable timer 1 output compare interrupt
#else
TIMSK &= ~_BV(OCIE1A) ; // disable timer 1 output compare interrupt
#endif
timerDetach(TIMER1OUTCOMPAREA_INT);
}
else if(timer == _timer3) {
#if defined(__AVR_ATmega1281__)||defined(__AVR_ATmega2561__)
TIMSK3 &= ~_BV(OCIE3A); // disable the timer3 output compare A interrupt
#else
ETIMSK &= ~_BV(OCIE3A); // disable the timer3 output compare A interrupt
#endif
timerDetach(TIMER3OUTCOMPAREA_INT);
}
#else
//For arduino - in future: call here to a currently undefined function to reset the timer
#endif
}
static boolean isTimerActive(timer16_Sequence_t timer)
{
// returns true if any servo is active on this timer
for(uint8_t channel=0; channel < SERVOS_PER_TIMER; channel++) {
if(SERVO(timer,channel).Pin.isActive == true)
return true;
}
return false;
}
/****************** end of static functions ******************************/
Servo::Servo()
{
if( ServoCount < MAX_SERVOS) {
this->servoIndex = ServoCount++; // assign a servo index to this instance
servos[this->servoIndex].ticks = usToTicks(DEFAULT_PULSE_WIDTH); // store default values - 12 Aug 2009
}
else
this->servoIndex = INVALID_SERVO ; // too many servos
}
uint8_t Servo::attach(int pin)
{
return this->attach(pin, MIN_PULSE_WIDTH, MAX_PULSE_WIDTH);
}
uint8_t Servo::attach(int pin, int min, int max)
{
if(this->servoIndex < MAX_SERVOS ) {
pinMode( pin, OUTPUT) ; // set servo pin to output
servos[this->servoIndex].Pin.nbr = pin;
// todo min/max check: abs(min - MIN_PULSE_WIDTH) /4 < 128
this->min = (MIN_PULSE_WIDTH - min)/4; //resolution of min/max is 4 uS
this->max = (MAX_PULSE_WIDTH - max)/4;
// initialize the timer if it has not already been initialized
timer16_Sequence_t timer = SERVO_INDEX_TO_TIMER(servoIndex);
if(isTimerActive(timer) == false)
initISR(timer);
servos[this->servoIndex].Pin.isActive = true; // this must be set after the check for isTimerActive
}
return this->servoIndex ;
}
void Servo::detach()
{
servos[this->servoIndex].Pin.isActive = false;
timer16_Sequence_t timer = SERVO_INDEX_TO_TIMER(servoIndex);
if(isTimerActive(timer) == false) {
finISR(timer);
}
}
void Servo::write(int value)
{
if(value < MIN_PULSE_WIDTH)
{ // treat values less than 544 as angles in degrees (valid values in microseconds are handled as microseconds)
if(value < 0) value = 0;
if(value > 180) value = 180;
value = map(value, 0, 180, SERVO_MIN(), SERVO_MAX());
}
this->writeMicroseconds(value);
}
void Servo::writeMicroseconds(int value)
{
// calculate and store the values for the given channel
byte channel = this->servoIndex;
if( (channel < MAX_SERVOS) ) // ensure channel is valid
{
if( value < SERVO_MIN() ) // ensure pulse width is valid
value = SERVO_MIN();
else if( value > SERVO_MAX() )
value = SERVO_MAX();
value = value - TRIM_DURATION;
value = usToTicks(value); // convert to ticks after compensating for interrupt overhead - 12 Aug 2009
uint8_t oldSREG = SREG;
cli();
servos[channel].ticks = value;
SREG = oldSREG;
}
}
int Servo::read() // return the value as degrees
{
return map( this->readMicroseconds()+1, SERVO_MIN(), SERVO_MAX(), 0, 180);
}
int Servo::readMicroseconds()
{
unsigned int pulsewidth;
if( this->servoIndex != INVALID_SERVO )
pulsewidth = ticksToUs(servos[this->servoIndex].ticks) + TRIM_DURATION ; // 12 aug 2009
else
pulsewidth = 0;
return pulsewidth;
}
bool Servo::attached()
{
return servos[this->servoIndex].Pin.isActive ;
}
#endif

132
Marlin/Servo.h Normal file
View file

@ -0,0 +1,132 @@
/*
Servo.h - Interrupt driven Servo library for Arduino using 16 bit timers- Version 2
Copyright (c) 2009 Michael Margolis. All right reserved.
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/*
A servo is activated by creating an instance of the Servo class passing the desired pin to the attach() method.
The servos are pulsed in the background using the value most recently written using the write() method
Note that analogWrite of PWM on pins associated with the timer are disabled when the first servo is attached.
Timers are seized as needed in groups of 12 servos - 24 servos use two timers, 48 servos will use four.
The sequence used to sieze timers is defined in timers.h
The methods are:
Servo - Class for manipulating servo motors connected to Arduino pins.
attach(pin ) - Attaches a servo motor to an i/o pin.
attach(pin, min, max ) - Attaches to a pin setting min and max values in microseconds
default min is 544, max is 2400
write() - Sets the servo angle in degrees. (invalid angle that is valid as pulse in microseconds is treated as microseconds)
writeMicroseconds() - Sets the servo pulse width in microseconds
read() - Gets the last written servo pulse width as an angle between 0 and 180.
readMicroseconds() - Gets the last written servo pulse width in microseconds. (was read_us() in first release)
attached() - Returns true if there is a servo attached.
detach() - Stops an attached servos from pulsing its i/o pin.
*/
#ifndef Servo_h
#define Servo_h
#include <inttypes.h>
/*
* Defines for 16 bit timers used with Servo library
*
* If _useTimerX is defined then TimerX is a 16 bit timer on the curent board
* timer16_Sequence_t enumerates the sequence that the timers should be allocated
* _Nbr_16timers indicates how many 16 bit timers are available.
*
*/
// Say which 16 bit timers can be used and in what order
#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
#define _useTimer5
//#define _useTimer1
#define _useTimer3
#define _useTimer4
//typedef enum { _timer5, _timer1, _timer3, _timer4, _Nbr_16timers } timer16_Sequence_t ;
typedef enum { _timer5, _timer3, _timer4, _Nbr_16timers } timer16_Sequence_t ;
#elif defined(__AVR_ATmega32U4__)
//#define _useTimer1
#define _useTimer3
//typedef enum { _timer1, _Nbr_16timers } timer16_Sequence_t ;
typedef enum { _timer3, _Nbr_16timers } timer16_Sequence_t ;
#elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)
#define _useTimer3
//#define _useTimer1
//typedef enum { _timer3, _timer1, _Nbr_16timers } timer16_Sequence_t ;
typedef enum { _timer3, _Nbr_16timers } timer16_Sequence_t ;
#elif defined(__AVR_ATmega128__) ||defined(__AVR_ATmega1281__)||defined(__AVR_ATmega2561__)
#define _useTimer3
//#define _useTimer1
//typedef enum { _timer3, _timer1, _Nbr_16timers } timer16_Sequence_t ;
typedef enum { _timer3, _Nbr_16timers } timer16_Sequence_t ;
#else // everything else
//#define _useTimer1
//typedef enum { _timer1, _Nbr_16timers } timer16_Sequence_t ;
typedef enum { _Nbr_16timers } timer16_Sequence_t ;
#endif
#define Servo_VERSION 2 // software version of this library
#define MIN_PULSE_WIDTH 544 // the shortest pulse sent to a servo
#define MAX_PULSE_WIDTH 2400 // the longest pulse sent to a servo
#define DEFAULT_PULSE_WIDTH 1500 // default pulse width when servo is attached
#define REFRESH_INTERVAL 20000 // minumim time to refresh servos in microseconds
#define SERVOS_PER_TIMER 12 // the maximum number of servos controlled by one timer
#define MAX_SERVOS (_Nbr_16timers * SERVOS_PER_TIMER)
#define INVALID_SERVO 255 // flag indicating an invalid servo index
typedef struct {
uint8_t nbr :6 ; // a pin number from 0 to 63
uint8_t isActive :1 ; // true if this channel is enabled, pin not pulsed if false
} ServoPin_t ;
typedef struct {
ServoPin_t Pin;
unsigned int ticks;
} servo_t;
class Servo
{
public:
Servo();
uint8_t attach(int pin); // attach the given pin to the next free channel, sets pinMode, returns channel number or 0 if failure
uint8_t attach(int pin, int min, int max); // as above but also sets min and max values for writes.
void detach();
void write(int value); // if value is < 200 its treated as an angle, otherwise as pulse width in microseconds
void writeMicroseconds(int value); // Write pulse width in microseconds
int read(); // returns current pulse width as an angle between 0 and 180 degrees
int readMicroseconds(); // returns current pulse width in microseconds for this servo (was read_us() in first release)
bool attached(); // return true if this servo is attached, otherwise false
private:
uint8_t servoIndex; // index into the channel data for this servo
int8_t min; // minimum is this value times 4 added to MIN_PULSE_WIDTH
int8_t max; // maximum is this value times 4 added to MAX_PULSE_WIDTH
};
#endif

20
Marlin/cardreader.cpp
View file

@ -18,6 +18,8 @@ CardReader::CardReader()
saving = false; saving = false;
logging = false; logging = false;
autostart_atmillis=0; autostart_atmillis=0;
workDirDepth = 0;
memset(workDirParents, 0, sizeof(workDirParents));
autostart_stilltocheck=true; //the sd start is delayed, because otherwise the serial cannot answer fast enought to make contact with the hostsoftware. autostart_stilltocheck=true; //the sd start is delayed, because otherwise the serial cannot answer fast enought to make contact with the hostsoftware.
lastnr=0; lastnr=0;
@ -204,7 +206,6 @@ void CardReader::startFileprint()
if(cardOK) if(cardOK)
{ {
sdprinting = true; sdprinting = true;
} }
} }
@ -521,19 +522,24 @@ void CardReader::chdir(const char * relpath)
} }
else else
{ {
workDirParentParent=workDirParent; if (workDirDepth < MAX_DIR_DEPTH) {
workDirParent=*parent; for (int d = ++workDirDepth; d--;)
workDirParents[d+1] = workDirParents[d];
workDirParents[0]=*parent;
}
workDir=newfile; workDir=newfile;
} }
} }
void CardReader::updir() void CardReader::updir()
{ {
if(!workDir.isRoot()) if(workDirDepth > 0)
{ {
workDir=workDirParent; --workDirDepth;
workDirParent=workDirParentParent; workDir = workDirParents[0];
int d;
for (int d = 0; d < workDirDepth; d++)
workDirParents[d] = workDirParents[d+1];
} }
} }

5
Marlin/cardreader.h
View file

@ -3,6 +3,8 @@
#ifdef SDSUPPORT #ifdef SDSUPPORT
#define MAX_DIR_DEPTH 10
#include "SdFile.h" #include "SdFile.h"
enum LsAction {LS_SerialPrint,LS_Count,LS_GetFilename}; enum LsAction {LS_SerialPrint,LS_Count,LS_GetFilename};
class CardReader class CardReader
@ -53,7 +55,8 @@ public:
bool filenameIsDir; bool filenameIsDir;
int lastnr; //last number of the autostart; int lastnr; //last number of the autostart;
private: private:
SdFile root,*curDir,workDir,workDirParent,workDirParentParent; SdFile root,*curDir,workDir,workDirParents[MAX_DIR_DEPTH];
uint16_t workDirDepth;
Sd2Card card; Sd2Card card;
SdVolume volume; SdVolume volume;
SdFile file; SdFile file;

42
Marlin/dogm_lcd_implementation.h
View file

@ -19,12 +19,25 @@
* Implementation of the LCD display routines for a DOGM128 graphic display. These are common LCD 128x64 pixel graphic displays. * Implementation of the LCD display routines for a DOGM128 graphic display. These are common LCD 128x64 pixel graphic displays.
**/ **/
#ifdef ULTIPANEL
#define BLEN_A 0
#define BLEN_B 1
#define BLEN_C 2
#define EN_A (1<<BLEN_A)
#define EN_B (1<<BLEN_B)
#define EN_C (1<<BLEN_C)
#define encrot0 0
#define encrot1 2
#define encrot2 3
#define encrot3 1
#define LCD_CLICKED (buttons&EN_C)
#endif
// CHANGE_DE begin *** #include <U8glib.h>
#include <U8glib.h> // DE_U8glib
#include "DOGMbitmaps.h" #include "DOGMbitmaps.h"
#include "dogm_font_data_marlin.h" #include "dogm_font_data_marlin.h"
#include "ultralcd.h" #include "ultralcd.h"
#include "ultralcd_st7920_u8glib_rrd.h"
/* Russian language not supported yet, needs custom font /* Russian language not supported yet, needs custom font
@ -61,17 +74,28 @@
#define FONT_STATUSMENU u8g_font_6x9 #define FONT_STATUSMENU u8g_font_6x9
int lcd_contrast;
// LCD selection // LCD selection
#ifdef U8GLIB_ST7920 #ifdef U8GLIB_ST7920
// SPI Com: SCK = en = (D4), MOSI = rw = (RS), CS = di = (ENABLE) //U8GLIB_ST7920_128X64_RRD u8g(0,0,0);
U8GLIB_ST7920_128X64_1X u8g(LCD_PINS_D4, LCD_PINS_ENABLE, LCD_PINS_RS); U8GLIB_ST7920_128X64_RRD u8g(0);
#elif defined(MAKRPANEL)
// The MaKrPanel display, ST7565 controller as well
U8GLIB_NHD_C12864 u8g(DOGLCD_CS, DOGLCD_A0);
#else #else
// for regular DOGM128 display with HW-SPI
U8GLIB_DOGM128 u8g(DOGLCD_CS, DOGLCD_A0); // HW-SPI Com: CS, A0 U8GLIB_DOGM128 u8g(DOGLCD_CS, DOGLCD_A0); // HW-SPI Com: CS, A0
#endif #endif
static void lcd_implementation_init() static void lcd_implementation_init()
{ {
#ifdef LCD_PIN_BL
pinMode(LCD_PIN_BL, OUTPUT); // Enable LCD backlight
digitalWrite(LCD_PIN_BL, HIGH);
#endif
u8g.setContrast(lcd_contrast);
// Uncomment this if you have the first generation (V1.10) of STBs board // Uncomment this if you have the first generation (V1.10) of STBs board
// pinMode(17, OUTPUT); // Enable LCD backlight // pinMode(17, OUTPUT); // Enable LCD backlight
// digitalWrite(17, HIGH); // digitalWrite(17, HIGH);
@ -88,11 +112,11 @@ static void lcd_implementation_init()
u8g.setRot90(); // Rotate screen by 90° u8g.setRot90(); // Rotate screen by 90°
#endif #endif
#ifdef LCD_SCREEN_ROT_180; #ifdef LCD_SCREEN_ROT_180
u8g.setRot180(); // Rotate screen by 180° u8g.setRot180(); // Rotate screen by 180°
#endif #endif
#ifdef LCD_SCREEN_ROT_270; #ifdef LCD_SCREEN_ROT_270
u8g.setRot270(); // Rotate screen by 270° u8g.setRot270(); // Rotate screen by 270°
#endif #endif
@ -105,14 +129,14 @@ static void lcd_implementation_init()
u8g.setFont(u8g_font_6x10_marlin); u8g.setFont(u8g_font_6x10_marlin);
u8g.drawStr(62,10,"MARLIN"); u8g.drawStr(62,10,"MARLIN");
u8g.setFont(u8g_font_5x8); u8g.setFont(u8g_font_5x8);
u8g.drawStr(62,19,"V1.0.0 RC2"); u8g.drawStr(62,19,"V1.0.0 RC2-mm");
u8g.setFont(u8g_font_6x10_marlin); u8g.setFont(u8g_font_6x10_marlin);
u8g.drawStr(62,28,"by ErikZalm"); u8g.drawStr(62,28,"by ErikZalm");
u8g.drawStr(62,41,"DOGM128 LCD"); u8g.drawStr(62,41,"DOGM128 LCD");
u8g.setFont(u8g_font_5x8); u8g.setFont(u8g_font_5x8);
u8g.drawStr(62,48,"enhancements"); u8g.drawStr(62,48,"enhancements");
u8g.setFont(u8g_font_5x8); u8g.setFont(u8g_font_5x8);
u8g.drawStr(62,55,"by STB"); u8g.drawStr(62,55,"by STB, MM");
u8g.drawStr(62,61,"uses u"); u8g.drawStr(62,61,"uses u");
u8g.drawStr90(92,57,"8"); u8g.drawStr90(92,57,"8");
u8g.drawStr(100,61,"glib"); u8g.drawStr(100,61,"glib");
@ -266,7 +290,7 @@ static void lcd_implementation_status_screen()
// Fan // Fan
u8g.setFont(FONT_STATUSMENU); u8g.setFont(FONT_STATUSMENU);
u8g.setPrintPos(104,27); u8g.setPrintPos(104,27);
#if FAN_PIN > 0 #if defined(FAN_PIN) && FAN_PIN > -1
u8g.print(itostr3(int((fanSpeed*100)/256 + 1))); u8g.print(itostr3(int((fanSpeed*100)/256 + 1)));
u8g.print("%"); u8g.print("%");
#else #else

585
Marlin/example_configurations/delta/Configuration.h Normal file
View file

@ -0,0 +1,585 @@
#ifndef CONFIGURATION_H
#define CONFIGURATION_H
// This configuration file contains the basic settings.
// Advanced settings can be found in Configuration_adv.h
// BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration
// User-specified version info of this build to display in [Pronterface, etc] terminal window during
// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
// build by the user have been successfully uploaded into firmware.
#define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time
#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
// SERIAL_PORT selects which serial port should be used for communication with the host.
// This allows the connection of wireless adapters (for instance) to non-default port pins.
// Serial port 0 is still used by the Arduino bootloader regardless of this setting.
#define SERIAL_PORT 0
// This determines the communication speed of the printer
#define BAUDRATE 250000
//#define BAUDRATE 115200
//// The following define selects which electronics board you have. Please choose the one that matches your setup
// 10 = Gen7 custom (Alfons3 Version) "https://github.com/Alfons3/Generation_7_Electronics"
// 11 = Gen7 v1.1, v1.2 = 11
// 12 = Gen7 v1.3
// 13 = Gen7 v1.4
// 3 = MEGA/RAMPS up to 1.2 = 3
// 33 = RAMPS 1.3 / 1.4 (Power outputs: Extruder, Fan, Bed)
// 34 = RAMPS 1.3 / 1.4 (Power outputs: Extruder0, Extruder1, Bed)
// 35 = RAMPS 1.3 / 1.4 (Power outputs: Extruder, Fan, Fan)
// 4 = Duemilanove w/ ATMega328P pin assignment
// 5 = Gen6
// 51 = Gen6 deluxe
// 6 = Sanguinololu < 1.2
// 62 = Sanguinololu 1.2 and above
// 63 = Melzi
// 64 = STB V1.1
// 65 = Azteeg X1
// 66 = Melzi with ATmega1284 (MaKr3d version)
// 7 = Ultimaker
// 71 = Ultimaker (Older electronics. Pre 1.5.4. This is rare)
// 77 = 3Drag Controller
// 8 = Teensylu
// 80 = Rumba
// 81 = Printrboard (AT90USB1286)
// 82 = Brainwave (AT90USB646)
// 9 = Gen3+
// 70 = Megatronics
// 701= Megatronics v2.0
// 702= Minitronics v1.0
// 90 = Alpha OMCA board
// 91 = Final OMCA board
// 301 = Rambo
// 21 = Elefu Ra Board (v3)
#ifndef MOTHERBOARD
#define MOTHERBOARD 33
#endif
// Define this to set a custom name for your generic Mendel,
// #define CUSTOM_MENDEL_NAME "This Mendel"
// This defines the number of extruders
#define EXTRUDERS 1
//// The following define selects which power supply you have. Please choose the one that matches your setup
// 1 = ATX
// 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
#define POWER_SUPPLY 1
//===========================================================================
//============================== Delta Settings =============================
//===========================================================================
// Enable DELTA kinematics and most of the default configuration for Deltas
#define DELTA
// Make delta curves from many straight lines (linear interpolation).
// This is a trade-off between visible corners (not enough segments)
// and processor overload (too many expensive sqrt calls).
#define DELTA_SEGMENTS_PER_SECOND 200
// Center-to-center distance of the holes in the diagonal push rods.
#define DELTA_DIAGONAL_ROD 250.0 // mm
// Horizontal offset from middle of printer to smooth rod center.
#define DELTA_SMOOTH_ROD_OFFSET 175.0 // mm
// Horizontal offset of the universal joints on the end effector.
#define DELTA_EFFECTOR_OFFSET 33.0 // mm
// Horizontal offset of the universal joints on the carriages.
#define DELTA_CARRIAGE_OFFSET 18.0 // mm
// Effective horizontal distance bridged by diagonal push rods.
#define DELTA_RADIUS (DELTA_SMOOTH_ROD_OFFSET-DELTA_EFFECTOR_OFFSET-DELTA_CARRIAGE_OFFSET)
// Effective X/Y positions of the three vertical towers.
#define SIN_60 0.8660254037844386
#define COS_60 0.5
#define DELTA_TOWER1_X -SIN_60*DELTA_RADIUS // front left tower
#define DELTA_TOWER1_Y -COS_60*DELTA_RADIUS
#define DELTA_TOWER2_X SIN_60*DELTA_RADIUS // front right tower
#define DELTA_TOWER2_Y -COS_60*DELTA_RADIUS
#define DELTA_TOWER3_X 0.0 // back middle tower
#define DELTA_TOWER3_Y DELTA_RADIUS
//===========================================================================
//=============================Thermal Settings ============================
//===========================================================================
//
//--NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
//
//// Temperature sensor settings:
// -2 is thermocouple with MAX6675 (only for sensor 0)
// -1 is thermocouple with AD595
// 0 is not used
// 1 is 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
// 2 is 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
// 3 is mendel-parts thermistor (4.7k pullup)
// 4 is 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
// 5 is 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan) (4.7k pullup)
// 6 is 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
// 7 is 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
// 8 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
// 9 is 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
// 10 is 100k RS thermistor 198-961 (4.7k pullup)
// 60 is 100k Maker's Tool Works Kapton Bed Thermister
//
// 1k ohm pullup tables - This is not normal, you would have to have changed out your 4.7k for 1k
// (but gives greater accuracy and more stable PID)
// 51 is 100k thermistor - EPCOS (1k pullup)
// 52 is 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
// 55 is 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan) (1k pullup)
#define TEMP_SENSOR_0 -1
#define TEMP_SENSOR_1 -1
#define TEMP_SENSOR_2 0
#define TEMP_SENSOR_BED 0
// This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted.
//#define TEMP_SENSOR_1_AS_REDUNDANT
#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
// Actual temperature must be close to target for this long before M109 returns success
#define TEMP_RESIDENCY_TIME 10 // (seconds)
#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one
#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early.
// The minimal temperature defines the temperature below which the heater will not be enabled It is used
// to check that the wiring to the thermistor is not broken.
// Otherwise this would lead to the heater being powered on all the time.
#define HEATER_0_MINTEMP 5
#define HEATER_1_MINTEMP 5
#define HEATER_2_MINTEMP 5
#define BED_MINTEMP 5
// When temperature exceeds max temp, your heater will be switched off.
// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure!
// You should use MINTEMP for thermistor short/failure protection.
#define HEATER_0_MAXTEMP 275
#define HEATER_1_MAXTEMP 275
#define HEATER_2_MAXTEMP 275
#define BED_MAXTEMP 150
// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the
// average current. The value should be an integer and the heat bed will be turned on for 1 interval of
// HEATER_BED_DUTY_CYCLE_DIVIDER intervals.
//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4
// PID settings:
// Comment the following line to disable PID and enable bang-bang.
#define PIDTEMP
#define BANG_MAX 255 // limits current to nozzle while in bang-bang mode; 255=full current
#define PID_MAX 255 // limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current
#ifdef PIDTEMP
//#define PID_DEBUG // Sends debug data to the serial port.
//#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
#define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
// is more then PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
#define PID_INTEGRAL_DRIVE_MAX 255 //limit for the integral term
#define K1 0.95 //smoothing factor within the PID
#define PID_dT ((16.0 * 8.0)/(F_CPU / 64.0 / 256.0)) //sampling period of the temperature routine
// If you are using a preconfigured hotend then you can use one of the value sets by uncommenting it
// Ultimaker
#define DEFAULT_Kp 22.2
#define DEFAULT_Ki 1.08
#define DEFAULT_Kd 114
// Makergear
// #define DEFAULT_Kp 7.0
// #define DEFAULT_Ki 0.1
// #define DEFAULT_Kd 12
// Mendel Parts V9 on 12V
// #define DEFAULT_Kp 63.0
// #define DEFAULT_Ki 2.25
// #define DEFAULT_Kd 440
#endif // PIDTEMP
// Bed Temperature Control
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
//
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder.
// If your PID_dT above is the default, and correct for your hardware/configuration, that means 7.689Hz,
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating.
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater.
// If your configuration is significantly different than this and you don't understand the issues involved, you probably
// shouldn't use bed PID until someone else verifies your hardware works.
// If this is enabled, find your own PID constants below.
//#define PIDTEMPBED
//
//#define BED_LIMIT_SWITCHING
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option.
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis)
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did,
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED)
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
#ifdef PIDTEMPBED
//120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
#define DEFAULT_bedKp 10.00
#define DEFAULT_bedKi .023
#define DEFAULT_bedKd 305.4
//120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
// #define DEFAULT_bedKp 97.1
// #define DEFAULT_bedKi 1.41
// #define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
//this prevents dangerous Extruder moves, i.e. if the temperature is under the limit
//can be software-disabled for whatever purposes by
#define PREVENT_DANGEROUS_EXTRUDE
//if PREVENT_DANGEROUS_EXTRUDE is on, you can still disable (uncomment) very long bits of extrusion separately.
#define PREVENT_LENGTHY_EXTRUDE
#define EXTRUDE_MINTEMP 170
#define EXTRUDE_MAXLENGTH (X_MAX_LENGTH+Y_MAX_LENGTH) //prevent extrusion of very large distances.
//===========================================================================
//=============================Mechanical Settings===========================
//===========================================================================
// Uncomment the following line to enable CoreXY kinematics
// #define COREXY
// coarse Endstop Settings
#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors
#ifndef ENDSTOPPULLUPS
// fine Enstop settings: Individual Pullups. will be ignored if ENDSTOPPULLUPS is defined
// #define ENDSTOPPULLUP_XMAX
// #define ENDSTOPPULLUP_YMAX
// #define ENDSTOPPULLUP_ZMAX
// #define ENDSTOPPULLUP_XMIN
// #define ENDSTOPPULLUP_YMIN
// #define ENDSTOPPULLUP_ZMIN
#endif
#ifdef ENDSTOPPULLUPS
#define ENDSTOPPULLUP_XMAX
#define ENDSTOPPULLUP_YMAX
#define ENDSTOPPULLUP_ZMAX
#define ENDSTOPPULLUP_XMIN
#define ENDSTOPPULLUP_YMIN
#define ENDSTOPPULLUP_ZMIN
#endif
// The pullups are needed if you directly connect a mechanical endswitch between the signal and ground pins.
const bool X_ENDSTOPS_INVERTING = false; // set to true to invert the logic of the endstops.
const bool Y_ENDSTOPS_INVERTING = false; // set to true to invert the logic of the endstops.
const bool Z_ENDSTOPS_INVERTING = false; // set to true to invert the logic of the endstops.
// deltas never have min endstops
#define DISABLE_MIN_ENDSTOPS
// Disable max endstops for compatibility with endstop checking routine
#if defined(COREXY) && !defined(DISABLE_MAX_ENDSTOPS)
#define DISABLE_MAX_ENDSTOPS
#endif
// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
#define X_ENABLE_ON 0
#define Y_ENABLE_ON 0
#define Z_ENABLE_ON 0
#define E_ENABLE_ON 0 // For all extruders
// Disables axis when it's not being used.
#define DISABLE_X false
#define DISABLE_Y false
#define DISABLE_Z false
#define DISABLE_E false // For all extruders
#define INVERT_X_DIR false // DELTA does not invert
#define INVERT_Y_DIR false
#define INVERT_Z_DIR false
#define INVERT_E0_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
#define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
#define INVERT_E2_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
// ENDSTOP SETTINGS:
// Sets direction of endstops when homing; 1=MAX, -1=MIN
// deltas always home to max
#define X_HOME_DIR 1
#define Y_HOME_DIR 1
#define Z_HOME_DIR 1
#define min_software_endstops true // If true, axis won't move to coordinates less than HOME_POS.
#define max_software_endstops true // If true, axis won't move to coordinates greater than the defined lengths below.
// Travel limits after homing
#define X_MAX_POS 90
#define X_MIN_POS -90
#define Y_MAX_POS 90
#define Y_MIN_POS -90
#define Z_MAX_POS MANUAL_Z_HOME_POS
#define Z_MIN_POS 0
#define X_MAX_LENGTH (X_MAX_POS - X_MIN_POS)
#define Y_MAX_LENGTH (Y_MAX_POS - Y_MIN_POS)
#define Z_MAX_LENGTH (Z_MAX_POS - Z_MIN_POS)
// The position of the homing switches
//#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used
//#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0)
//Manual homing switch locations:
#define MANUAL_HOME_POSITIONS // MANUAL_*_HOME_POS below will be used
// For deltabots this means top and center of the cartesian print volume.
#define MANUAL_X_HOME_POS 0
#define MANUAL_Y_HOME_POS 0
#define MANUAL_Z_HOME_POS 250 // For delta: Distance between nozzle and print surface after homing.
//// MOVEMENT SETTINGS
#define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E
// delta homing speeds must be the same on xyz
#define HOMING_FEEDRATE {200*60, 200*60, 200*60, 0} // set the homing speeds (mm/min)
// default settings
// delta speeds must be the same on xyz
#define DEFAULT_AXIS_STEPS_PER_UNIT {80, 80, 80, 760*1.1} // default steps per unit for Kossel (GT2, 20 tooth)
#define DEFAULT_MAX_FEEDRATE {500, 500, 500, 25} // (mm/sec)
#define DEFAULT_MAX_ACCELERATION {9000,9000,9000,10000} // X, Y, Z, E maximum start speed for accelerated moves. E default values are good for skeinforge 40+, for older versions raise them a lot.
#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E max acceleration in mm/s^2 for printing moves
#define DEFAULT_RETRACT_ACCELERATION 3000 // X, Y, Z and E max acceleration in mm/s^2 for retracts
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
// For the other hotends it is their distance from the extruder 0 hotend.
// #define EXTRUDER_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis
// #define EXTRUDER_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis
// The speed change that does not require acceleration (i.e. the software might assume it can be done instantaneously)
#define DEFAULT_XYJERK 20.0 // (mm/sec)
#define DEFAULT_ZJERK 20.0 // (mm/sec) Must be same as XY for delta
#define DEFAULT_EJERK 5.0 // (mm/sec)
//===========================================================================
//=============================Additional Features===========================
//===========================================================================
// EEPROM
// the microcontroller can store settings in the EEPROM, e.g. max velocity...
// M500 - stores paramters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
//define this to enable eeprom support
//#define EEPROM_SETTINGS
//to disable EEPROM Serial responses and decrease program space by ~1700 byte: comment this out:
// please keep turned on if you can.
//#define EEPROM_CHITCHAT
// Preheat Constants
#define PLA_PREHEAT_HOTEND_TEMP 180
#define PLA_PREHEAT_HPB_TEMP 70
#define PLA_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255
#define ABS_PREHEAT_HOTEND_TEMP 240
#define ABS_PREHEAT_HPB_TEMP 100
#define ABS_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255
//LCD and SD support
//#define ULTRA_LCD //general lcd support, also 16x2
//#define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
//#define SDSUPPORT // Enable SD Card Support in Hardware Console
//#define SDSLOW // Use slower SD transfer mode (not normally needed - uncomment if you're getting volume init error)
//#define ULTIMAKERCONTROLLER //as available from the ultimaker online store.
//#define ULTIPANEL //the ultipanel as on thingiverse
// The MaKr3d Makr-Panel with graphic controller and SD support
// http://reprap.org/wiki/MaKr3d_MaKrPanel
//#define MAKRPANEL
// The RepRapDiscount Smart Controller (white PCB)
// http://reprap.org/wiki/RepRapDiscount_Smart_Controller
//#define REPRAP_DISCOUNT_SMART_CONTROLLER
// The GADGETS3D G3D LCD/SD Controller (blue PCB)
// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel
//#define G3D_PANEL
// The RepRapDiscount FULL GRAPHIC Smart Controller (quadratic white PCB)
// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
//
// ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib
//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
// The RepRapWorld REPRAPWORLD_KEYPAD v1.1
// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626
//#define REPRAPWORLD_KEYPAD
//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // how much should be moved when a key is pressed, eg 10.0 means 10mm per click
// The Elefu RA Board Control Panel
// http://www.elefu.com/index.php?route=product/product&product_id=53
// REMEMBER TO INSTALL LiquidCrystal_I2C.h in your ARUDINO library folder: https://github.com/kiyoshigawa/LiquidCrystal_I2C
//#define RA_CONTROL_PANEL
//automatic expansion
#if defined (MAKRPANEL)
#define DOGLCD
#define SDSUPPORT
#define ULTIPANEL
#define NEWPANEL
#define DEFAULT_LCD_CONTRAST 17
#endif
#if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define DOGLCD
#define U8GLIB_ST7920
#define REPRAP_DISCOUNT_SMART_CONTROLLER
#endif
#if defined(ULTIMAKERCONTROLLER) || defined(REPRAP_DISCOUNT_SMART_CONTROLLER) || defined(G3D_PANEL)
#define ULTIPANEL
#define NEWPANEL
#endif
#if defined(REPRAPWORLD_KEYPAD)
#define NEWPANEL
#define ULTIPANEL
#endif
#if defined(RA_CONTROL_PANEL)
#define ULTIPANEL
#define NEWPANEL
#define LCD_I2C_TYPE_PCA8574
#define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander
#endif
//I2C PANELS
//#define LCD_I2C_SAINSMART_YWROBOT
#ifdef LCD_I2C_SAINSMART_YWROBOT
// This uses the LiquidCrystal_I2C library ( https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home )
// Make sure it is placed in the Arduino libraries directory.
#define LCD_I2C_TYPE_PCF8575
#define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander
#define NEWPANEL
#define ULTIPANEL
#endif
// PANELOLU2 LCD with status LEDs, separate encoder and click inputs
//#define LCD_I2C_PANELOLU2
#ifdef LCD_I2C_PANELOLU2
// This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 )
// Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory.
// (v1.2.3 no longer requires you to define PANELOLU in the LiquidTWI2.h library header file)
// Note: The PANELOLU2 encoder click input can either be directly connected to a pin
// (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1).
#define LCD_I2C_TYPE_MCP23017
#define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander
#define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD
#define NEWPANEL
#define ULTIPANEL
#endif
// Panucatt VIKI LCD with status LEDs, integrated click & L/R/U/P buttons, separate encoder inputs
//#define LCD_I2C_VIKI
#ifdef LCD_I2C_VIKI
// This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 )
// Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory.
// Note: The pause/stop/resume LCD button pin should be connected to the Arduino
// BTN_ENC pin (or set BTN_ENC to -1 if not used)
#define LCD_I2C_TYPE_MCP23017
#define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander
#define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD (requires LiquidTWI2 v1.2.3 or later)
#define NEWPANEL
#define ULTIPANEL
#endif
#ifdef ULTIPANEL
// #define NEWPANEL //enable this if you have a click-encoder panel
#define SDSUPPORT
#define ULTRA_LCD
#ifdef DOGLCD // Change number of lines to match the DOG graphic display
#define LCD_WIDTH 20
#define LCD_HEIGHT 5
#else
#define LCD_WIDTH 20
#define LCD_HEIGHT 4
#endif
#else //no panel but just lcd
#ifdef ULTRA_LCD
#ifdef DOGLCD // Change number of lines to match the 128x64 graphics display
#define LCD_WIDTH 20
#define LCD_HEIGHT 5
#else
#define LCD_WIDTH 16
#define LCD_HEIGHT 2
#endif
#endif
#endif
// default LCD contrast for dogm-like LCD displays
#ifdef DOGLCD
# ifndef DEFAULT_LCD_CONTRAST
# define DEFAULT_LCD_CONTRAST 32
# endif
#endif
// Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino
//#define FAST_PWM_FAN
// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
// which is not ass annoying as with the hardware PWM. On the other hand, if this frequency
// is too low, you should also increment SOFT_PWM_SCALE.
//#define FAN_SOFT_PWM
// Incrementing this by 1 will double the software PWM frequency,
// affecting heaters, and the fan if FAN_SOFT_PWM is enabled.
// However, control resolution will be halved for each increment;
// at zero value, there are 128 effective control positions.
#define SOFT_PWM_SCALE 0
// M240 Triggers a camera by emulating a Canon RC-1 Remote
// Data from: http://www.doc-diy.net/photo/rc-1_hacked/
// #define PHOTOGRAPH_PIN 23
// SF send wrong arc g-codes when using Arc Point as fillet procedure
//#define SF_ARC_FIX
// Support for the BariCUDA Paste Extruder.
//#define BARICUDA
/*********************************************************************\
* R/C SERVO support
* Sponsored by TrinityLabs, Reworked by codexmas
**********************************************************************/
// Number of servos
//
// If you select a configuration below, this will receive a default value and does not need to be set manually
// set it manually if you have more servos than extruders and wish to manually control some
// leaving it undefined or defining as 0 will disable the servo subsystem
// If unsure, leave commented / disabled
//
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command
// Servo Endstops
//
// This allows for servo actuated endstops, primary usage is for the Z Axis to eliminate calibration or bed height changes.
// Use M206 command to correct for switch height offset to actual nozzle height. Store that setting with M500.
//
//#define SERVO_ENDSTOPS {-1, -1, 0} // Servo index for X, Y, Z. Disable with -1
//#define SERVO_ENDSTOP_ANGLES {0,0, 0,0, 70,0} // X,Y,Z Axis Extend and Retract angles
#include "Configuration_adv.h"
#include "thermistortables.h"
#endif //__CONFIGURATION_H

396
Marlin/example_configurations/delta/Configuration_adv.h Normal file
View file

@ -0,0 +1,396 @@
#ifndef CONFIGURATION_ADV_H
#define CONFIGURATION_ADV_H
//===========================================================================
//=============================Thermal Settings ============================
//===========================================================================
#ifdef BED_LIMIT_SWITCHING
#define BED_HYSTERESIS 2 //only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS
#endif
#define BED_CHECK_INTERVAL 5000 //ms between checks in bang-bang control
//// Heating sanity check:
// This waits for the watchperiod in milliseconds whenever an M104 or M109 increases the target temperature
// If the temperature has not increased at the end of that period, the target temperature is set to zero.
// It can be reset with another M104/M109. This check is also only triggered if the target temperature and the current temperature
// differ by at least 2x WATCH_TEMP_INCREASE
//#define WATCH_TEMP_PERIOD 40000 //40 seconds
//#define WATCH_TEMP_INCREASE 10 //Heat up at least 10 degree in 20 seconds
#ifdef PIDTEMP
// this adds an experimental additional term to the heatingpower, proportional to the extrusion speed.
// if Kc is choosen well, the additional required power due to increased melting should be compensated.
#define PID_ADD_EXTRUSION_RATE
#ifdef PID_ADD_EXTRUSION_RATE
#define DEFAULT_Kc (1) //heatingpower=Kc*(e_speed)
#endif
#endif
//automatic temperature: The hot end target temperature is calculated by all the buffered lines of gcode.
//The maximum buffered steps/sec of the extruder motor are called "se".
//You enter the autotemp mode by a M109 S<mintemp> T<maxtemp> F<factor>
// the target temperature is set to mintemp+factor*se[steps/sec] and limited by mintemp and maxtemp
// you exit the value by any M109 without F*
// Also, if the temperature is set to a value <mintemp, it is not changed by autotemp.
// on an ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode
#define AUTOTEMP
#ifdef AUTOTEMP
#define AUTOTEMP_OLDWEIGHT 0.98
#endif
// extruder run-out prevention.
//if the machine is idle, and the temperature over MINTEMP, every couple of SECONDS some filament is extruded
//#define EXTRUDER_RUNOUT_PREVENT
#define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 30.
#define EXTRUDER_RUNOUT_ESTEPS 14. //mm filament
#define EXTRUDER_RUNOUT_SPEED 1500. //extrusion speed
#define EXTRUDER_RUNOUT_EXTRUDE 100
//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements.
//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET"
#define TEMP_SENSOR_AD595_OFFSET 0.0
#define TEMP_SENSOR_AD595_GAIN 1.0
//This is for controlling a fan to cool down the stepper drivers
//it will turn on when any driver is enabled
//and turn off after the set amount of seconds from last driver being disabled again
#define CONTROLLERFAN_PIN -1 //Pin used for the fan to cool controller (-1 to disable)
#define CONTROLLERFAN_SECS 60 //How many seconds, after all motors were disabled, the fan should run
#define CONTROLLERFAN_SPEED 255 // == full speed
// When first starting the main fan, run it at full speed for the
// given number of milliseconds. This gets the fan spinning reliably
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
//#define FAN_KICKSTART_TIME 100
// Extruder cooling fans
// Configure fan pin outputs to automatically turn on/off when the associated
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE.
// Multiple extruders can be assigned to the same pin in which case
// the fan will turn on when any selected extruder is above the threshold.
#define EXTRUDER_0_AUTO_FAN_PIN -1
#define EXTRUDER_1_AUTO_FAN_PIN -1
#define EXTRUDER_2_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
//===========================================================================
//=============================Mechanical Settings===========================
//===========================================================================
#define ENDSTOPS_ONLY_FOR_HOMING // If defined the endstops will only be used for homing
//// AUTOSET LOCATIONS OF LIMIT SWITCHES
//// Added by ZetaPhoenix 09-15-2012
#ifdef MANUAL_HOME_POSITIONS // Use manual limit switch locations
#define X_HOME_POS MANUAL_X_HOME_POS
#define Y_HOME_POS MANUAL_Y_HOME_POS
#define Z_HOME_POS MANUAL_Z_HOME_POS
#else //Set min/max homing switch positions based upon homing direction and min/max travel limits
//X axis
#if X_HOME_DIR == -1
#ifdef BED_CENTER_AT_0_0
#define X_HOME_POS X_MAX_LENGTH * -0.5
#else
#define X_HOME_POS X_MIN_POS
#endif //BED_CENTER_AT_0_0
#else
#ifdef BED_CENTER_AT_0_0
#define X_HOME_POS X_MAX_LENGTH * 0.5
#else
#define X_HOME_POS X_MAX_POS
#endif //BED_CENTER_AT_0_0
#endif //X_HOME_DIR == -1
//Y axis
#if Y_HOME_DIR == -1
#ifdef BED_CENTER_AT_0_0
#define Y_HOME_POS Y_MAX_LENGTH * -0.5
#else
#define Y_HOME_POS Y_MIN_POS
#endif //BED_CENTER_AT_0_0
#else
#ifdef BED_CENTER_AT_0_0
#define Y_HOME_POS Y_MAX_LENGTH * 0.5
#else
#define Y_HOME_POS Y_MAX_POS
#endif //BED_CENTER_AT_0_0
#endif //Y_HOME_DIR == -1
// Z axis
#if Z_HOME_DIR == -1 //BED_CENTER_AT_0_0 not used
#define Z_HOME_POS Z_MIN_POS
#else
#define Z_HOME_POS Z_MAX_POS
#endif //Z_HOME_DIR == -1
#endif //End auto min/max positions
//END AUTOSET LOCATIONS OF LIMIT SWITCHES -ZP
//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats.
// A single Z stepper driver is usually used to drive 2 stepper motors.
// Uncomment this define to utilize a separate stepper driver for each Z axis motor.
// Only a few motherboards support this, like RAMPS, which have dual extruder support (the 2nd, often unused, extruder driver is used
// to control the 2nd Z axis stepper motor). The pins are currently only defined for a RAMPS motherboards.
// On a RAMPS (or other 5 driver) motherboard, using this feature will limit you to using 1 extruder.
//#define Z_DUAL_STEPPER_DRIVERS
#ifdef Z_DUAL_STEPPER_DRIVERS
#undef EXTRUDERS
#define EXTRUDERS 1
#endif
// Enable this for dual x-carriage printers.
// A dual x-carriage design has the advantage that the inactive extruder can be parked which
// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage
// allowing faster printing speeds.
//#define DUAL_X_CARRIAGE
#ifdef DUAL_X_CARRIAGE
// Configuration for second X-carriage
// Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
// the second x-carriage always homes to the maximum endstop.
#define X2_MIN_POS 88 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
#define X2_MAX_POS 350.45 // set maximum to the distance between toolheads when both heads are homed
#define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position
#define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position
// However: In this mode the EXTRUDER_OFFSET_X value for the second extruder provides a software
// override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops
// without modifying the firmware (through the "M218 T1 X???" command).
// Remember: you should set the second extruder x-offset to 0 in your slicer.
// Pins for second x-carriage stepper driver (defined here to avoid further complicating pins.h)
#define X2_ENABLE_PIN 29
#define X2_STEP_PIN 25
#define X2_DIR_PIN 23
#endif // DUAL_X_CARRIAGE
//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
#define X_HOME_RETRACT_MM 5
#define Y_HOME_RETRACT_MM 5
#define Z_HOME_RETRACT_MM 5 // deltas need the same for all three axis
//#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially.
#define AXIS_RELATIVE_MODES {false, false, false, false}
#define MAX_STEP_FREQUENCY 40000 // Max step frequency for Ultimaker (5000 pps / half step)
//By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
#define INVERT_Y_STEP_PIN false
#define INVERT_Z_STEP_PIN false
#define INVERT_E_STEP_PIN false
//default stepper release if idle
#define DEFAULT_STEPPER_DEACTIVE_TIME 60
#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate
#define DEFAULT_MINTRAVELFEEDRATE 0.0
// minimum time in microseconds that a movement needs to take if the buffer is emptied.
#define DEFAULT_MINSEGMENTTIME 20000
// If defined the movements slow down when the look ahead buffer is only half full
// (don't use SLOWDOWN with DELTA because DELTA generates hundreds of segments per second)
//#define SLOWDOWN
// Frequency limit
// See nophead's blog for more info
// Not working O
//#define XY_FREQUENCY_LIMIT 15
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05// (mm/sec)
// MS1 MS2 Stepper Driver Microstepping mode table
#define MICROSTEP1 LOW,LOW
#define MICROSTEP2 HIGH,LOW
#define MICROSTEP4 LOW,HIGH
#define MICROSTEP8 HIGH,HIGH
#define MICROSTEP16 HIGH,HIGH
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
// Motor Current setting (Only functional when motor driver current ref pins are connected to a digital trimpot on supported boards)
#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
//===========================================================================
//=============================Additional Features===========================
//===========================================================================
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
// The hardware watchdog should reset the Microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation.
//#define USE_WATCHDOG
#ifdef USE_WATCHDOG
// If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on.
// The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset.
// However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled.
//#define WATCHDOG_RESET_MANUAL
#endif
// Enable the option to stop SD printing when hitting and endstops, needs to be enabled from the LCD menu when this option is enabled.
//#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
// extruder advance constant (s2/mm3)
//
// advance (steps) = STEPS_PER_CUBIC_MM_E * EXTUDER_ADVANCE_K * cubic mm per second ^ 2
//
// hooke's law says: force = k * distance
// bernoulli's priniciple says: v ^ 2 / 2 + g . h + pressure / density = constant
// so: v ^ 2 is proportional to number of steps we advance the extruder
//#define ADVANCE
#ifdef ADVANCE
#define EXTRUDER_ADVANCE_K .0
#define D_FILAMENT 2.85
#define STEPS_MM_E 836
#define EXTRUTION_AREA (0.25 * D_FILAMENT * D_FILAMENT * 3.14159)
#define STEPS_PER_CUBIC_MM_E (axis_steps_per_unit[E_AXIS]/ EXTRUTION_AREA)
#endif // ADVANCE
// Arc interpretation settings:
#define MM_PER_ARC_SEGMENT 1
#define N_ARC_CORRECTION 25
const unsigned int dropsegments=5; //everything with less than this number of steps will be ignored as move and joined with the next movement
// If you are using a RAMPS board or cheap E-bay purchased boards that do not detect when an SD card is inserted
// You can get round this by connecting a push button or single throw switch to the pin defined as SDCARDCARDDETECT
// in the pins.h file. When using a push button pulling the pin to ground this will need inverted. This setting should
// be commented out otherwise
#define SDCARDDETECTINVERTED
#ifdef ULTIPANEL
#undef SDCARDDETECTINVERTED
#endif
// Power Signal Control Definitions
// By default use ATX definition
#ifndef POWER_SUPPLY
#define POWER_SUPPLY 1
#endif
// 1 = ATX
#if (POWER_SUPPLY == 1)
#define PS_ON_AWAKE LOW
#define PS_ON_ASLEEP HIGH
#endif
// 2 = X-Box 360 203W
#if (POWER_SUPPLY == 2)
#define PS_ON_AWAKE HIGH
#define PS_ON_ASLEEP LOW
#endif
//===========================================================================
//=============================Buffers ============================
//===========================================================================
// The number of linear motions that can be in the plan at any give time.
// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2, i.g. 8,16,32 because shifts and ors are used to do the ringbuffering.
#if defined SDSUPPORT
#define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
#else
#define BLOCK_BUFFER_SIZE 16 // maximize block buffer
#endif
//The ASCII buffer for recieving from the serial:
#define MAX_CMD_SIZE 96
#define BUFSIZE 4
// Firmware based and LCD controled retract
// M207 and M208 can be used to define parameters for the retraction.
// The retraction can be called by the slicer using G10 and G11
// until then, intended retractions can be detected by moves that only extrude and the direction.
// the moves are than replaced by the firmware controlled ones.
// #define FWRETRACT //ONLY PARTIALLY TESTED
#define MIN_RETRACT 0.1 //minimum extruded mm to accept a automatic gcode retraction attempt
//adds support for experimental filament exchange support M600; requires display
#ifdef ULTIPANEL
//#define FILAMENTCHANGEENABLE
#ifdef FILAMENTCHANGEENABLE
#define FILAMENTCHANGE_XPOS 3
#define FILAMENTCHANGE_YPOS 3
#define FILAMENTCHANGE_ZADD 10
#define FILAMENTCHANGE_FIRSTRETRACT -2
#define FILAMENTCHANGE_FINALRETRACT -100
#endif
#endif
//===========================================================================
//============================= Define Defines ============================
//===========================================================================
#if EXTRUDERS > 1 && defined TEMP_SENSOR_1_AS_REDUNDANT
#error "You cannot use TEMP_SENSOR_1_AS_REDUNDANT if EXTRUDERS > 1"
#endif
#if TEMP_SENSOR_0 > 0
#define THERMISTORHEATER_0 TEMP_SENSOR_0
#define HEATER_0_USES_THERMISTOR
#endif
#if TEMP_SENSOR_1 > 0
#define THERMISTORHEATER_1 TEMP_SENSOR_1
#define HEATER_1_USES_THERMISTOR
#endif
#if TEMP_SENSOR_2 > 0
#define THERMISTORHEATER_2 TEMP_SENSOR_2
#define HEATER_2_USES_THERMISTOR
#endif
#if TEMP_SENSOR_BED > 0
#define THERMISTORBED TEMP_SENSOR_BED
#define BED_USES_THERMISTOR
#endif
#if TEMP_SENSOR_0 == -1
#define HEATER_0_USES_AD595
#endif
#if TEMP_SENSOR_1 == -1
#define HEATER_1_USES_AD595
#endif
#if TEMP_SENSOR_2 == -1
#define HEATER_2_USES_AD595
#endif
#if TEMP_SENSOR_BED == -1
#define BED_USES_AD595
#endif
#if TEMP_SENSOR_0 == -2
#define HEATER_0_USES_MAX6675
#endif
#if TEMP_SENSOR_0 == 0
#undef HEATER_0_MINTEMP
#undef HEATER_0_MAXTEMP
#endif
#if TEMP_SENSOR_1 == 0
#undef HEATER_1_MINTEMP
#undef HEATER_1_MAXTEMP
#endif
#if TEMP_SENSOR_2 == 0
#undef HEATER_2_MINTEMP
#undef HEATER_2_MAXTEMP
#endif
#if TEMP_SENSOR_BED == 0
#undef BED_MINTEMP
#undef BED_MAXTEMP
#endif
#endif //__CONFIGURATION_ADV_H

696
Marlin/fastio.h
View file

@ -2575,8 +2575,702 @@ pins
#define PF7_DDR DDRF #define PF7_DDR DDRF
#endif #endif
#if defined (__AVR_ATmega1281__) || defined (__AVR_ATmega2561__)
// UART
#define RXD DIO0
#define TXD DIO1
// SPI
#define SCK DIO10
#define MISO DIO12
#define MOSI DIO11
#define SS DIO16
// TWI (I2C)
#define SCL DIO17
#define SDA DIO18
// timers and PWM
#define OC0A DIO9
#define OC0B DIO4
#define OC1A DIO7
#define OC1B DIO8
#define OC2A DIO6
#define OC3A DIO5
#define OC3B DIO2
#define OC3C DIO3
// change for your board
#define DEBUG_LED DIO46
/*
pins
*/
#define DIO0_PIN PINE0
#define DIO0_RPORT PINE
#define DIO0_WPORT PORTE
#define DIO0_DDR DDRE
#define DIO0_PWM NULL
#define DIO1_PIN PINE1
#define DIO1_RPORT PINE
#define DIO1_WPORT PORTE
#define DIO1_DDR DDRE
#define DIO1_PWM NULL
#define DIO2_PIN PINE4
#define DIO2_RPORT PINE
#define DIO2_WPORT PORTE
#define DIO2_DDR DDRE
#define DIO2_PWM &OCR3BL
#define DIO3_PIN PINE5
#define DIO3_RPORT PINE
#define DIO3_WPORT PORTE
#define DIO3_DDR DDRE
#define DIO3_PWM &OCR3CL
#define DIO4_PIN PING5
#define DIO4_RPORT PING
#define DIO4_WPORT PORTG
#define DIO4_DDR DDRG
#define DIO4_PWM &OCR0B
#define DIO5_PIN PINE3
#define DIO5_RPORT PINE
#define DIO5_WPORT PORTE
#define DIO5_DDR DDRE
#define DIO5_PWM &OCR3AL
#define DIO6_PIN PINB4
#define DIO6_RPORT PINB
#define DIO6_WPORT PORTB
#define DIO6_DDR DDRB
#define DIO6_PWM &OCR2AL
#define DIO7_PIN PINB5
#define DIO7_RPORT PINB
#define DIO7_WPORT PORTB
#define DIO7_DDR DDRB
#define DIO7_PWM &OCR1AL
#define DIO8_PIN PINB6
#define DIO8_RPORT PINB
#define DIO8_WPORT PORTB
#define DIO8_DDR DDRB
#define DIO8_PWM &OCR1BL
#define DIO9_PIN PINB7
#define DIO9_RPORT PINB
#define DIO9_WPORT PORTB
#define DIO9_DDR DDRB
#define DIO9_PWM &OCR0AL
#define DIO10_PIN PINB1
#define DIO10_RPORT PINB
#define DIO10_WPORT PORTB
#define DIO10_DDR DDRB
#define DIO10_PWM NULL
#define DIO11_PIN PINB2
#define DIO11_RPORT PINB
#define DIO11_WPORT PORTB
#define DIO11_DDR DDRB
#define DIO11_PWM NULL
#define DIO12_PIN PINB3
#define DIO12_RPORT PINB
#define DIO12_WPORT PORTB
#define DIO12_DDR DDRB
#define DIO12_PWM NULL
#define DIO13_PIN PINE2
#define DIO13_RPORT PINE
#define DIO13_WPORT PORTE
#define DIO13_DDR DDRE
#define DIO13_PWM NULL
#define DIO14_PIN PINE6
#define DIO14_RPORT PINE
#define DIO14_WPORT PORTE
#define DIO14_DDR DDRE
#define DIO14_PWM NULL
#define DIO15_PIN PINE7
#define DIO15_RPORT PINE
#define DIO15_WPORT PORTE
#define DIO15_DDR DDRE
#define DIO15_PWM NULL
#define DIO16_PIN PINB0
#define DIO16_RPORT PINB
#define DIO16_WPORT PORTB
#define DIO16_DDR DDRB
#define DIO16_PWM NULL
#define DIO17_PIN PIND0
#define DIO17_RPORT PIND
#define DIO17_WPORT PORTD
#define DIO17_DDR DDRD
#define DIO17_PWM NULL
#define DIO18_PIN PIND1
#define DIO18_RPORT PIND
#define DIO18_WPORT PORTD
#define DIO18_DDR DDRD
#define DIO18_PWM NULL
#define DIO19_PIN PIND2
#define DIO19_RPORT PIND
#define DIO19_WPORT PORTD
#define DIO19_DDR DDRD
#define DIO19_PWM NULL
#define DIO20_PIN PIND3
#define DIO20_RPORT PIND
#define DIO20_WPORT PORTD
#define DIO20_DDR DDRD
#define DIO20_PWM NULL
#define DIO21_PIN PIND4
#define DIO21_RPORT PIND
#define DIO21_WPORT PORTD
#define DIO21_DDR DDRD
#define DIO21_PWM NULL
#define DIO22_PIN PIND5
#define DIO22_RPORT PIND
#define DIO22_WPORT PORTD
#define DIO22_DDR DDRD
#define DIO22_PWM NULL
#define DIO23_PIN PIND6
#define DIO23_RPORT PIND
#define DIO23_WPORT PORTD
#define DIO23_DDR DDRD
#define DIO23_PWM NULL
#define DIO24_PIN PIND7
#define DIO24_RPORT PIND
#define DIO24_WPORT PORTD
#define DIO24_DDR DDRD
#define DIO24_PWM NULL
#define DIO25_PIN PING0
#define DIO25_RPORT PING
#define DIO25_WPORT PORTG
#define DIO25_DDR DDRG
#define DIO25_PWM NULL
#define DIO26_PIN PING1
#define DIO26_RPORT PING
#define DIO26_WPORT PORTG
#define DIO26_DDR DDRG
#define DIO26_PWM NULL
#define DIO27_PIN PING2
#define DIO27_RPORT PING
#define DIO27_WPORT PORTG
#define DIO27_DDR DDRG
#define DIO27_PWM NULL
#define DIO28_PIN PING3
#define DIO28_RPORT PING
#define DIO28_WPORT PORTG
#define DIO28_DDR DDRG
#define DIO28_PWM NULL
#define DIO29_PIN PING4
#define DIO29_RPORT PING
#define DIO29_WPORT PORTG
#define DIO29_DDR DDRG
#define DIO29_PWM NULL
#define DIO30_PIN PINC0
#define DIO30_RPORT PINC
#define DIO30_WPORT PORTC
#define DIO30_DDR DDRC
#define DIO30_PWM NULL
#define DIO31_PIN PINC1
#define DIO31_RPORT PINC
#define DIO31_WPORT PORTC
#define DIO31_DDR DDRC
#define DIO31_PWM NULL
#define DIO32_PIN PINC2
#define DIO32_RPORT PINC
#define DIO32_WPORT PORTC
#define DIO32_DDR DDRC
#define DIO32_PWM NULL
#define DIO33_PIN PINC3
#define DIO33_RPORT PINC
#define DIO33_WPORT PORTC
#define DIO33_DDR DDRC
#define DIO33_PWM NULL
#define DIO34_PIN PINC4
#define DIO34_RPORT PINC
#define DIO34_WPORT PORTC
#define DIO34_DDR DDRC
#define DIO34_PWM NULL
#define DIO35_PIN PINC5
#define DIO35_RPORT PINC
#define DIO35_WPORT PORTC
#define DIO35_DDR DDRC
#define DIO35_PWM NULL
#define DIO36_PIN PINC6
#define DIO36_RPORT PINC
#define DIO36_WPORT PORTC
#define DIO36_DDR DDRC
#define DIO36_PWM NULL
#define DIO37_PIN PINC7
#define DIO37_RPORT PINC
#define DIO37_WPORT PORTC
#define DIO37_DDR DDRC
#define DIO37_PWM NULL
#define DIO38_PIN PINA0
#define DIO38_RPORT PINA
#define DIO38_WPORT PORTA
#define DIO38_DDR DDRA
#define DIO38_PWM NULL
#define DIO39_PIN PINA1
#define DIO39_RPORT PINA
#define DIO39_WPORT PORTA
#define DIO39_DDR DDRA
#define DIO39_PWM NULL
#define DIO40_PIN PINA2
#define DIO40_RPORT PINA
#define DIO40_WPORT PORTA
#define DIO40_DDR DDRA
#define DIO40_PWM NULL
#define DIO41_PIN PINA3
#define DIO41_RPORT PINA
#define DIO41_WPORT PORTA
#define DIO41_DDR DDRA
#define DIO41_PWM NULL
#define DIO42_PIN PINA4
#define DIO42_RPORT PINA
#define DIO42_WPORT PORTA
#define DIO42_DDR DDRA
#define DIO42_PWM NULL
#define DIO43_PIN PINA5
#define DIO43_RPORT PINA
#define DIO43_WPORT PORTA
#define DIO43_DDR DDRA
#define DIO43_PWM NULL
#define DIO44_PIN PINA6
#define DIO44_RPORT PINA
#define DIO44_WPORT PORTA
#define DIO44_DDR DDRA
#define DIO44_PWM NULL
#define DIO45_PIN PINA7
#define DIO45_RPORT PINA
#define DIO45_WPORT PORTA
#define DIO45_DDR DDRA
#define DIO45_PWM NULL
#define DIO46_PIN PINF0
#define DIO46_RPORT PINF
#define DIO46_WPORT PORTF
#define DIO46_DDR DDRF
#define DIO46_PWM NULL
#define DIO47_PIN PINF1
#define DIO47_RPORT PINF
#define DIO47_WPORT PORTF
#define DIO47_DDR DDRF
#define DIO47_PWM NULL
#define DIO48_PIN PINF2
#define DIO48_RPORT PINF
#define DIO48_WPORT PORTF
#define DIO48_DDR DDRF
#define DIO48_PWM NULL
#define DIO49_PIN PINF3
#define DIO49_RPORT PINF
#define DIO49_WPORT PORTF
#define DIO49_DDR DDRF
#define DIO49_PWM NULL
#define DIO50_PIN PINF4
#define DIO50_RPORT PINF
#define DIO50_WPORT PORTF
#define DIO50_DDR DDRF
#define DIO50_PWM NULL
#define DIO51_PIN PINF5
#define DIO51_RPORT PINF
#define DIO51_WPORT PORTF
#define DIO51_DDR DDRF
#define DIO51_PWM NULL
#define DIO52_PIN PINF6
#define DIO52_RPORT PINF
#define DIO52_WPORT PORTF
#define DIO52_DDR DDRF
#define DIO52_PWM NULL
#define DIO53_PIN PINF7
#define DIO53_RPORT PINF
#define DIO53_WPORT PORTF
#define DIO53_DDR DDRF
#define DIO53_PWM NULL
#undef PA0
#define PA0_PIN PINA0
#define PA0_RPORT PINA
#define PA0_WPORT PORTA
#define PA0_DDR DDRA
#define PA0_PWM NULL
#undef PA1
#define PA1_PIN PINA1
#define PA1_RPORT PINA
#define PA1_WPORT PORTA
#define PA1_DDR DDRA
#define PA1_PWM NULL
#undef PA2
#define PA2_PIN PINA2
#define PA2_RPORT PINA
#define PA2_WPORT PORTA
#define PA2_DDR DDRA
#define PA2_PWM NULL
#undef PA3
#define PA3_PIN PINA3
#define PA3_RPORT PINA
#define PA3_WPORT PORTA
#define PA3_DDR DDRA
#define PA3_PWM NULL
#undef PA4
#define PA4_PIN PINA4
#define PA4_RPORT PINA
#define PA4_WPORT PORTA
#define PA4_DDR DDRA
#define PA4_PWM NULL
#undef PA5
#define PA5_PIN PINA5
#define PA5_RPORT PINA
#define PA5_WPORT PORTA
#define PA5_DDR DDRA
#define PA5_PWM NULL
#undef PA6
#define PA6_PIN PINA6
#define PA6_RPORT PINA
#define PA6_WPORT PORTA
#define PA6_DDR DDRA
#define PA6_PWM NULL
#undef PA7
#define PA7_PIN PINA7
#define PA7_RPORT PINA
#define PA7_WPORT PORTA
#define PA7_DDR DDRA
#define PA7_PWM NULL
#undef PB0
#define PB0_PIN PINB0
#define PB0_RPORT PINB
#define PB0_WPORT PORTB
#define PB0_DDR DDRB
#define PB0_PWM NULL
#undef PB1
#define PB1_PIN PINB1
#define PB1_RPORT PINB
#define PB1_WPORT PORTB
#define PB1_DDR DDRB
#define PB1_PWM NULL
#undef PB2
#define PB2_PIN PINB2
#define PB2_RPORT PINB
#define PB2_WPORT PORTB
#define PB2_DDR DDRB
#define PB2_PWM NULL
#undef PB3
#define PB3_PIN PINB3
#define PB3_RPORT PINB
#define PB3_WPORT PORTB
#define PB3_DDR DDRB
#define PB3_PWM NULL
#undef PB4
#define PB4_PIN PINB4
#define PB4_RPORT PINB
#define PB4_WPORT PORTB
#define PB4_DDR DDRB
#define PB4_PWM &OCR2A
#undef PB5
#define PB5_PIN PINB5
#define PB5_RPORT PINB
#define PB5_WPORT PORTB
#define PB5_DDR DDRB
#define PB5_PWM NULL
#undef PB6
#define PB6_PIN PINB6
#define PB6_RPORT PINB
#define PB6_WPORT PORTB
#define PB6_DDR DDRB
#define PB6_PWM NULL
#undef PB7
#define PB7_PIN PINB7
#define PB7_RPORT PINB
#define PB7_WPORT PORTB
#define PB7_DDR DDRB
#define PB7_PWM &OCR0A
#undef PC0
#define PC0_PIN PINC0
#define PC0_RPORT PINC
#define PC0_WPORT PORTC
#define PC0_DDR DDRC
#define PC0_PWM NULL
#undef PC1
#define PC1_PIN PINC1
#define PC1_RPORT PINC
#define PC1_WPORT PORTC
#define PC1_DDR DDRC
#define PC1_PWM NULL
#undef PC2
#define PC2_PIN PINC2
#define PC2_RPORT PINC
#define PC2_WPORT PORTC
#define PC2_DDR DDRC
#define PC2_PWM NULL
#undef PC3
#define PC3_PIN PINC3
#define PC3_RPORT PINC
#define PC3_WPORT PORTC
#define PC3_DDR DDRC
#define PC3_PWM NULL
#undef PC4
#define PC4_PIN PINC4
#define PC4_RPORT PINC
#define PC4_WPORT PORTC
#define PC4_DDR DDRC
#define PC4_PWM NULL
#undef PC5
#define PC5_PIN PINC5
#define PC5_RPORT PINC
#define PC5_WPORT PORTC
#define PC5_DDR DDRC
#define PC5_PWM NULL
#undef PC6
#define PC6_PIN PINC6
#define PC6_RPORT PINC
#define PC6_WPORT PORTC
#define PC6_DDR DDRC
#define PC6_PWM NULL
#undef PC7
#define PC7_PIN PINC7
#define PC7_RPORT PINC
#define PC7_WPORT PORTC
#define PC7_DDR DDRC
#define PC7_PWM NULL
#undef PD0
#define PD0_PIN PIND0
#define PD0_RPORT PIND
#define PD0_WPORT PORTD
#define PD0_DDR DDRD
#define PD0_PWM NULL
#undef PD1
#define PD1_PIN PIND1
#define PD1_RPORT PIND
#define PD1_WPORT PORTD
#define PD1_DDR DDRD
#define PD1_PWM NULL
#undef PD2
#define PD2_PIN PIND2
#define PD2_RPORT PIND
#define PD2_WPORT PORTD
#define PD2_DDR DDRD
#define PD2_PWM NULL
#undef PD3
#define PD3_PIN PIND3
#define PD3_RPORT PIND
#define PD3_WPORT PORTD
#define PD3_DDR DDRD
#define PD3_PWM NULL
#undef PD4
#define PD4_PIN PIND4
#define PD4_RPORT PIND
#define PD4_WPORT PORTD
#define PD4_DDR DDRD
#define PD4_PWM NULL
#undef PD5
#define PD5_PIN PIND5
#define PD5_RPORT PIND
#define PD5_WPORT PORTD
#define PD5_DDR DDRD
#define PD5_PWM NULL
#undef PD6
#define PD6_PIN PIND6
#define PD6_RPORT PIND
#define PD6_WPORT PORTD
#define PD6_DDR DDRD
#define PD6_PWM NULL
#undef PD7
#define PD7_PIN PIND7
#define PD7_RPORT PIND
#define PD7_WPORT PORTD
#define PD7_DDR DDRD
#define PD7_PWM NULL
#undef PE0
#define PE0_PIN PINE0
#define PE0_RPORT PINE
#define PE0_WPORT PORTE
#define PE0_DDR DDRE
#define PE0_PWM NULL
#undef PE1
#define PE1_PIN PINE1
#define PE1_RPORT PINE
#define PE1_WPORT PORTE
#define PE1_DDR DDRE
#define PE1_PWM NULL
#undef PE2
#define PE2_PIN PINE2
#define PE2_RPORT PINE
#define PE2_WPORT PORTE
#define PE2_DDR DDRE
#define PE2_PWM NULL
#undef PE3
#define PE3_PIN PINE3
#define PE3_RPORT PINE
#define PE3_WPORT PORTE
#define PE3_DDR DDRE
#define PE3_PWM &OCR3AL
#undef PE4
#define PE4_PIN PINE4
#define PE4_RPORT PINE
#define PE4_WPORT PORTE
#define PE4_DDR DDRE
#define PE4_PWM &OCR3BL
#undef PE5
#define PE5_PIN PINE5
#define PE5_RPORT PINE
#define PE5_WPORT PORTE
#define PE5_DDR DDRE
#define PE5_PWM &OCR3CL
#undef PE6
#define PE6_PIN PINE6
#define PE6_RPORT PINE
#define PE6_WPORT PORTE
#define PE6_DDR DDRE
#define PE6_PWM NULL
#undef PE7
#define PE7_PIN PINE7
#define PE7_RPORT PINE
#define PE7_WPORT PORTE
#define PE7_DDR DDRE
#define PE7_PWM NULL
#undef PF0
#define PF0_PIN PINF0
#define PF0_RPORT PINF
#define PF0_WPORT PORTF
#define PF0_DDR DDRF
#define PF0_PWM NULL
#undef PF1
#define PF1_PIN PINF1
#define PF1_RPORT PINF
#define PF1_WPORT PORTF
#define PF1_DDR DDRF
#define PF1_PWM NULL
#undef PF2
#define PF2_PIN PINF2
#define PF2_RPORT PINF
#define PF2_WPORT PORTF
#define PF2_DDR DDRF
#define PF2_PWM NULL
#undef PF3
#define PF3_PIN PINF3
#define PF3_RPORT PINF
#define PF3_WPORT PORTF
#define PF3_DDR DDRF
#define PF3_PWM NULL
#undef PF4
#define PF4_PIN PINF4
#define PF4_RPORT PINF
#define PF4_WPORT PORTF
#define PF4_DDR DDRF
#define PF4_PWM NULL
#undef PF5
#define PF5_PIN PINF5
#define PF5_RPORT PINF
#define PF5_WPORT PORTF
#define PF5_DDR DDRF
#define PF5_PWM NULL
#undef PF6
#define PF6_PIN PINF6
#define PF6_RPORT PINF
#define PF6_WPORT PORTF
#define PF6_DDR DDRF
#define PF6_PWM NULL
#undef PF7
#define PF7_PIN PINF7
#define PF7_RPORT PINF
#define PF7_WPORT PORTF
#define PF7_DDR DDRF
#define PF7_PWM NULL
#undef PG0
#define PG0_PIN PING0
#define PG0_RPORT PING
#define PG0_WPORT PORTG
#define PG0_DDR DDRG
#define PG0_PWM NULL
#undef PG1
#define PG1_PIN PING1
#define PG1_RPORT PING
#define PG1_WPORT PORTG
#define PG1_DDR DDRG
#define PG1_PWM NULL
#undef PG2
#define PG2_PIN PING2
#define PG2_RPORT PING
#define PG2_WPORT PORTG
#define PG2_DDR DDRG
#define PG2_PWM NULL
#undef PG3
#define PG3_PIN PING3
#define PG3_RPORT PING
#define PG3_WPORT PORTG
#define PG3_DDR DDRG
#define PG3_PWM NULL
#undef PG4
#define PG4_PIN PING4
#define PG4_RPORT PING
#define PG4_WPORT PORTG
#define PG4_DDR DDRG
#define PG4_PWM NULL
#undef PG5
#define PG5_PIN PING5
#define PG5_RPORT PING
#define PG5_WPORT PORTG
#define PG5_DDR DDRG
#define PG5_PWM &OCR0B
#endif
#ifndef DIO0_PIN #ifndef DIO0_PIN
#error pins for this chip not defined in arduino.h! If you write an appropriate pin definition and have this firmware work on your chip, please submit a pull request #error pins for this chip not defined in arduino.h! If you write an appropriate pin definition and have this firmware work on your chip, please submit a pull request
#endif #endif
#endif /* _FASTIO_ARDUINO_H */ #endif /* _FASTIO_ARDUINO_H */

2996
Marlin/language.h
View file

@ -1,1485 +1,1537 @@
#ifndef LANGUAGE_H #ifndef LANGUAGE_H
#define LANGUAGE_H #define LANGUAGE_H
// NOTE: IF YOU CHANGE THIS FILE / MERGE THIS FILE WITH CHANGES // NOTE: IF YOU CHANGE THIS FILE / MERGE THIS FILE WITH CHANGES
// //
// ==&gt; ALWAYS TRY TO COMPILE MARLIN WITH/WITHOUT "ULTIPANEL" / "ULTRALCD" / "SDSUPPORT" #define IN "Configuration.h" // ==> ALWAYS TRY TO COMPILE MARLIN WITH/WITHOUT "ULTIPANEL" / "ULTRALCD" / "SDSUPPORT" #define IN "Configuration.h"
// ==&gt; ALSO TRY ALL AVAILABLE "LANGUAGE_CHOICE" OPTIONS // ==> ALSO TRY ALL AVAILABLE "LANGUAGE_CHOICE" OPTIONS
// Languages // Languages
// 1 English // 1 English
// 2 Polish // 2 Polish
// 3 French (awaiting translation!) // 3 French
// 4 German // 4 German
// 5 Spanish // 5 Spanish
// 6 Russian // 6 Russian
// 7 Italian // 7 Italian
// 8 Portuguese // 8 Portuguese
// 9 Finnish // 9 Finnish
#ifndef LANGUAGE_CHOICE #ifndef LANGUAGE_CHOICE
#define LANGUAGE_CHOICE 1 // Pick your language from the list above #define LANGUAGE_CHOICE 1 // Pick your language from the list above
#endif #endif
#define PROTOCOL_VERSION "1.0" #define PROTOCOL_VERSION "1.0"
#if MOTHERBOARD == 7 || MOTHERBOARD == 71 #if MOTHERBOARD == 7 || MOTHERBOARD == 71
#define MACHINE_NAME "Ultimaker" #define MACHINE_NAME "Ultimaker"
#define FIRMWARE_URL "http://firmware.ultimaker.com" #define FIRMWARE_URL "http://firmware.ultimaker.com"
#elif MOTHERBOARD == 80 #elif MOTHERBOARD == 80
#define MACHINE_NAME "Rumba" #define MACHINE_NAME "Rumba"
#define FIRMWARE_URL "https://github.com/ErikZalm/Marlin/" #define FIRMWARE_URL "https://github.com/ErikZalm/Marlin/"
#else #elif MOTHERBOARD == 77
#define MACHINE_NAME "Mendel" #define MACHINE_NAME "3Drag"
#define FIRMWARE_URL "http://www.mendel-parts.com" #define FIRMWARE_URL "http://3dprint.elettronicain.it/"
#endif #else
#ifdef CUSTOM_MENDEL_NAME
#define STRINGIFY_(n) #n #define MACHINE_NAME CUSTOM_MENDEL_NAME
#define STRINGIFY(n) STRINGIFY_(n) #else
#define MACHINE_NAME "Mendel"
#if LANGUAGE_CHOICE == 1 #endif
#define FIRMWARE_URL "http://www.mendel-parts.com"
// LCD Menu Messages #endif
#define WELCOME_MSG MACHINE_NAME " Ready."
#define MSG_SD_INSERTED "Card inserted" #define STRINGIFY_(n) #n
#define MSG_SD_REMOVED "Card removed" #define STRINGIFY(n) STRINGIFY_(n)
#define MSG_MAIN "Main"
#define MSG_AUTOSTART "Autostart" #if LANGUAGE_CHOICE == 1
#define MSG_DISABLE_STEPPERS "Disable Steppers"
#define MSG_AUTO_HOME "Auto Home" // LCD Menu Messages
#define MSG_SET_ORIGIN "Set Origin" #define WELCOME_MSG MACHINE_NAME " Ready."
#define MSG_PREHEAT_PLA "Preheat PLA" #define MSG_SD_INSERTED "Card inserted"
#define MSG_PREHEAT_PLA_SETTINGS "Preheat PLA Conf" #define MSG_SD_REMOVED "Card removed"
#define MSG_PREHEAT_ABS "Preheat ABS" #define MSG_MAIN "Main"
#define MSG_PREHEAT_ABS_SETTINGS "Preheat ABS Conf" #define MSG_AUTOSTART "Autostart"
#define MSG_COOLDOWN "Cooldown" #define MSG_DISABLE_STEPPERS "Disable Steppers"
#define MSG_EXTRUDE "Extrude" #define MSG_AUTO_HOME "Auto Home"
#define MSG_RETRACT "Retract" #define MSG_SET_ORIGIN "Set Origin"
#define MSG_MOVE_AXIS "Move Axis" #define MSG_PREHEAT_PLA "Preheat PLA"
#define MSG_SPEED "Speed" #define MSG_PREHEAT_PLA_SETTINGS "Preheat PLA Conf"
#define MSG_NOZZLE "Nozzle" #define MSG_PREHEAT_ABS "Preheat ABS"
#define MSG_NOZZLE1 "Nozzle2" #define MSG_PREHEAT_ABS_SETTINGS "Preheat ABS Conf"
#define MSG_NOZZLE2 "Nozzle3" #define MSG_COOLDOWN "Cooldown"
#define MSG_BED "Bed" #define MSG_SWITCH_PS_ON "Switch Power On"
#define MSG_FAN_SPEED "Fan speed" #define MSG_SWITCH_PS_OFF "Switch Power Off"
#define MSG_FLOW "Flow" #define MSG_EXTRUDE "Extrude"
#define MSG_CONTROL "Control" #define MSG_RETRACT "Retract"
#define MSG_MIN " \002 Min" #define MSG_MOVE_AXIS "Move Axis"
#define MSG_MAX " \002 Max" #define MSG_SPEED "Speed"
#define MSG_FACTOR " \002 Fact" #define MSG_NOZZLE "Nozzle"
#define MSG_AUTOTEMP "Autotemp" #define MSG_NOZZLE1 "Nozzle2"
#define MSG_ON "On " #define MSG_NOZZLE2 "Nozzle3"
#define MSG_OFF "Off" #define MSG_BED "Bed"
#define MSG_PID_P "PID-P" #define MSG_FAN_SPEED "Fan speed"
#define MSG_PID_I "PID-I" #define MSG_FLOW "Flow"
#define MSG_PID_D "PID-D" #define MSG_CONTROL "Control"
#define MSG_PID_C "PID-C" #define MSG_MIN " \002 Min"
#define MSG_ACC "Accel" #define MSG_MAX " \002 Max"
#define MSG_FACTOR " \002 Fact"
#define MSG_AUTOTEMP "Autotemp"
#define MSG_ON "On "
#define MSG_OFF "Off"
#define MSG_PID_P "PID-P"
#define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
#define MSG_ACC "Accel"
#define MSG_VXY_JERK "Vxy-jerk" #define MSG_VXY_JERK "Vxy-jerk"
#define MSG_VZ_JERK "Vz-jerk" #define MSG_VZ_JERK "Vz-jerk"
#define MSG_VE_JERK "Ve-jerk" #define MSG_VE_JERK "Ve-jerk"
#define MSG_VMAX "Vmax " #define MSG_VMAX "Vmax "
#define MSG_X "x" #define MSG_X "x"
#define MSG_Y "y" #define MSG_Y "y"
#define MSG_Z "z" #define MSG_Z "z"
#define MSG_E "e" #define MSG_E "e"
#define MSG_VMIN "Vmin" #define MSG_VMIN "Vmin"
#define MSG_VTRAV_MIN "VTrav min" #define MSG_VTRAV_MIN "VTrav min"
#define MSG_AMAX "Amax " #define MSG_AMAX "Amax "
#define MSG_A_RETRACT "A-retract" #define MSG_A_RETRACT "A-retract"
#define MSG_XSTEPS "Xsteps/mm" #define MSG_XSTEPS "Xsteps/mm"
#define MSG_YSTEPS "Ysteps/mm" #define MSG_YSTEPS "Ysteps/mm"
#define MSG_ZSTEPS "Zsteps/mm" #define MSG_ZSTEPS "Zsteps/mm"
#define MSG_ESTEPS "Esteps/mm" #define MSG_ESTEPS "Esteps/mm"
#define MSG_RECTRACT "Rectract" #define MSG_RECTRACT "Rectract"
#define MSG_TEMPERATURE "Temperature" #define MSG_TEMPERATURE "Temperature"
#define MSG_MOTION "Motion" #define MSG_MOTION "Motion"
#define MSG_STORE_EPROM "Store memory" #define MSG_CONTRAST "LCD contrast"
#define MSG_LOAD_EPROM "Load memory" #define MSG_STORE_EPROM "Store memory"
#define MSG_RESTORE_FAILSAFE "Restore Failsafe" #define MSG_LOAD_EPROM "Load memory"
#define MSG_REFRESH "Refresh" #define MSG_RESTORE_FAILSAFE "Restore Failsafe"
#define MSG_WATCH "Info screen" #define MSG_REFRESH "Refresh"
#define MSG_PREPARE "Prepare" #define MSG_WATCH "Info screen"
#define MSG_TUNE "Tune" #define MSG_PREPARE "Prepare"
#define MSG_PAUSE_PRINT "Pause Print" #define MSG_TUNE "Tune"
#define MSG_RESUME_PRINT "Resume Print" #define MSG_PAUSE_PRINT "Pause Print"
#define MSG_STOP_PRINT "Stop Print" #define MSG_RESUME_PRINT "Resume Print"
#define MSG_CARD_MENU "Print from SD" #define MSG_STOP_PRINT "Stop Print"
#define MSG_NO_CARD "No Card" #define MSG_CARD_MENU "Print from SD"
#define MSG_DWELL "Sleep..." #define MSG_NO_CARD "No Card"
#define MSG_USERWAIT "Wait for user..." #define MSG_DWELL "Sleep..."
#define MSG_RESUMING "Resuming print" #define MSG_USERWAIT "Wait for user..."
#define MSG_NO_MOVE "No move." #define MSG_RESUMING "Resuming print"
#define MSG_KILLED "KILLED. " #define MSG_NO_MOVE "No move."
#define MSG_STOPPED "STOPPED. " #define MSG_KILLED "KILLED. "
#define MSG_CONTROL_RETRACT "Retract mm" #define MSG_STOPPED "STOPPED. "
#define MSG_CONTROL_RETRACTF "Retract F" #define MSG_CONTROL_RETRACT "Retract mm"
#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm" #define MSG_CONTROL_RETRACTF "Retract F"
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm" #define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet F" #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
#define MSG_AUTORETRACT "AutoRetr." #define MSG_CONTROL_RETRACT_RECOVERF "UnRet F"
#define MSG_FILAMENTCHANGE "Change filament" #define MSG_AUTORETRACT "AutoRetr."
#define MSG_INIT_SDCARD "Init. SD-Card" #define MSG_FILAMENTCHANGE "Change filament"
#define MSG_CNG_SDCARD "Change SD-Card" #define MSG_INIT_SDCARD "Init. SD-Card"
#define MSG_CNG_SDCARD "Change SD-Card"
// Serial Console Messages
// Serial Console Messages
#define MSG_Enqueing "enqueing \""
#define MSG_POWERUP "PowerUp" #define MSG_Enqueing "enqueing \""
#define MSG_EXTERNAL_RESET " External Reset" #define MSG_POWERUP "PowerUp"
#define MSG_BROWNOUT_RESET " Brown out Reset" #define MSG_EXTERNAL_RESET " External Reset"
#define MSG_WATCHDOG_RESET " Watchdog Reset" #define MSG_BROWNOUT_RESET " Brown out Reset"
#define MSG_SOFTWARE_RESET " Software Reset" #define MSG_WATCHDOG_RESET " Watchdog Reset"
#define MSG_MARLIN "Marlin " #define MSG_SOFTWARE_RESET " Software Reset"
#define MSG_AUTHOR " | Author: " #define MSG_MARLIN "Marlin "
#define MSG_CONFIGURATION_VER " Last Updated: " #define MSG_AUTHOR " | Author: "
#define MSG_FREE_MEMORY " Free Memory: " #define MSG_CONFIGURATION_VER " Last Updated: "
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " #define MSG_FREE_MEMORY " Free Memory: "
#define MSG_OK "ok" #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
#define MSG_FILE_SAVED "Done saving file." #define MSG_OK "ok"
#define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line: " #define MSG_FILE_SAVED "Done saving file."
#define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line: " #define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line: "
#define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line: " #define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line: "
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line: " #define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line: "
#define MSG_FILE_PRINTED "Done printing file" #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line: "
#define MSG_BEGIN_FILE_LIST "Begin file list" #define MSG_FILE_PRINTED "Done printing file"
#define MSG_END_FILE_LIST "End file list" #define MSG_BEGIN_FILE_LIST "Begin file list"
#define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder " #define MSG_END_FILE_LIST "End file list"
#define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder " #define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
#define MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder " #define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
#define MSG_ERR_NO_THERMISTORS "No thermistors - no temperature" #define MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder "
#define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder " #define MSG_ERR_NO_THERMISTORS "No thermistors - no temperature"
#define MSG_HEATING "Heating..." #define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
#define MSG_HEATING_COMPLETE "Heating done." #define MSG_HEATING "Heating..."
#define MSG_BED_HEATING "Bed Heating." #define MSG_HEATING_COMPLETE "Heating done."
#define MSG_BED_DONE "Bed done." #define MSG_BED_HEATING "Bed Heating."
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" #define MSG_BED_DONE "Bed done."
#define MSG_COUNT_X " Count X: " #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
#define MSG_ERR_KILLED "Printer halted. kill() called!" #define MSG_COUNT_X " Count X: "
#define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)" #define MSG_ERR_KILLED "Printer halted. kill() called!"
#define MSG_RESEND "Resend: " #define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
#define MSG_UNKNOWN_COMMAND "Unknown command: \"" #define MSG_RESEND "Resend: "
#define MSG_ACTIVE_EXTRUDER "Active Extruder: " #define MSG_UNKNOWN_COMMAND "Unknown command: \""
#define MSG_INVALID_EXTRUDER "Invalid extruder" #define MSG_ACTIVE_EXTRUDER "Active Extruder: "
#define MSG_X_MIN "x_min: " #define MSG_INVALID_EXTRUDER "Invalid extruder"
#define MSG_X_MAX "x_max: " #define MSG_X_MIN "x_min: "
#define MSG_Y_MIN "y_min: " #define MSG_X_MAX "x_max: "
#define MSG_Y_MAX "y_max: " #define MSG_Y_MIN "y_min: "
#define MSG_Z_MIN "z_min: " #define MSG_Y_MAX "y_max: "
#define MSG_Z_MAX "z_max: " #define MSG_Z_MIN "z_min: "
#define MSG_M119_REPORT "Reporting endstop status" #define MSG_Z_MAX "z_max: "
#define MSG_ENDSTOP_HIT "TRIGGERED" #define MSG_M119_REPORT "Reporting endstop status"
#define MSG_ENDSTOP_OPEN "open" #define MSG_ENDSTOP_HIT "TRIGGERED"
#define MSG_HOTEND_OFFSET "Hotend offsets:" #define MSG_ENDSTOP_OPEN "open"
#define MSG_HOTEND_OFFSET "Hotend offsets:"
#define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
#define MSG_SD_INIT_FAIL "SD init fail" #define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
#define MSG_SD_VOL_INIT_FAIL "volume.init failed" #define MSG_SD_INIT_FAIL "SD init fail"
#define MSG_SD_OPENROOT_FAIL "openRoot failed" #define MSG_SD_VOL_INIT_FAIL "volume.init failed"
#define MSG_SD_CARD_OK "SD card ok" #define MSG_SD_OPENROOT_FAIL "openRoot failed"
#define MSG_SD_WORKDIR_FAIL "workDir open failed" #define MSG_SD_CARD_OK "SD card ok"
#define MSG_SD_OPEN_FILE_FAIL "open failed, File: " #define MSG_SD_WORKDIR_FAIL "workDir open failed"
#define MSG_SD_FILE_OPENED "File opened: " #define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
#define MSG_SD_SIZE " Size: " #define MSG_SD_FILE_OPENED "File opened: "
#define MSG_SD_FILE_SELECTED "File selected" #define MSG_SD_SIZE " Size: "
#define MSG_SD_WRITE_TO_FILE "Writing to file: " #define MSG_SD_FILE_SELECTED "File selected"
#define MSG_SD_PRINTING_BYTE "SD printing byte " #define MSG_SD_WRITE_TO_FILE "Writing to file: "
#define MSG_SD_NOT_PRINTING "Not SD printing" #define MSG_SD_PRINTING_BYTE "SD printing byte "
#define MSG_SD_ERR_WRITE_TO_FILE "error writing to file" #define MSG_SD_NOT_PRINTING "Not SD printing"
#define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir: " #define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
#define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir: "
#define MSG_STEPPER_TO_HIGH "Steprate to high: "
#define MSG_ENDSTOPS_HIT "endstops hit: " #define MSG_STEPPER_TOO_HIGH "Steprate too high: "
#define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented" #define MSG_ENDSTOPS_HIT "endstops hit: "
#define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented" #define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
#define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"
#endif
#endif
#if LANGUAGE_CHOICE == 2
#if LANGUAGE_CHOICE == 2
// LCD Menu Messages
#define WELCOME_MSG MACHINE_NAME " Gotowe." // LCD Menu Messages
#define MSG_SD_INSERTED "Karta wlozona" #define WELCOME_MSG MACHINE_NAME " Gotowe."
#define MSG_SD_REMOVED "Karta usunieta" #define MSG_SD_INSERTED "Karta wlozona"
#define MSG_MAIN "Main" #define MSG_SD_REMOVED "Karta usunieta"
#define MSG_AUTOSTART "Autostart" #define MSG_MAIN "Main"
#define MSG_DISABLE_STEPPERS "Wylacz silniki" #define MSG_AUTOSTART "Autostart"
#define MSG_AUTO_HOME "Auto. poz. zerowa" #define MSG_DISABLE_STEPPERS "Wylacz silniki"
#define MSG_SET_ORIGIN "Ustaw punkt zerowy" #define MSG_AUTO_HOME "Auto. poz. zerowa"
#define MSG_PREHEAT_PLA "Rozgrzej PLA" #define MSG_SET_ORIGIN "Ustaw punkt zerowy"
#define MSG_PREHEAT_PLA_SETTINGS "Ustawienia roz. PLA" #define MSG_PREHEAT_PLA "Rozgrzej PLA"
#define MSG_PREHEAT_ABS "Rozgrzej ABS" #define MSG_PREHEAT_PLA_SETTINGS "Ustawienia roz. PLA"
#define MSG_PREHEAT_ABS_SETTINGS "Ustawienia roz. ABS" #define MSG_PREHEAT_ABS "Rozgrzej ABS"
#define MSG_COOLDOWN "Chlodzenie" #define MSG_PREHEAT_ABS_SETTINGS "Ustawienia roz. ABS"
#define MSG_EXTRUDE "Ekstruzja" #define MSG_COOLDOWN "Chlodzenie"
#define MSG_RETRACT "Cofanie" #define MSG_SWITCH_PS_ON "Switch Power On"
#define MSG_MOVE_AXIS "Ruch osi" #define MSG_SWITCH_PS_OFF "Switch Power Off"
#define MSG_SPEED "Predkosc" #define MSG_EXTRUDE "Ekstruzja"
#define MSG_NOZZLE "Dysza" #define MSG_RETRACT "Cofanie"
#define MSG_NOZZLE1 "Dysza2" #define MSG_MOVE_AXIS "Ruch osi"
#define MSG_NOZZLE2 "Dysza3" #define MSG_SPEED "Predkosc"
#define MSG_BED "Loze" #define MSG_NOZZLE "Dysza"
#define MSG_FAN_SPEED "Obroty wiatraka" #define MSG_NOZZLE1 "Dysza2"
#define MSG_FLOW "Przeplyw" #define MSG_NOZZLE2 "Dysza3"
#define MSG_CONTROL "Kontrola" #define MSG_BED "Loze"
#define MSG_MIN " \002 Min" #define MSG_FAN_SPEED "Obroty wiatraka"
#define MSG_MAX " \002 Max" #define MSG_FLOW "Przeplyw"
#define MSG_FACTOR " \002 Mnoznik" #define MSG_CONTROL "Kontrola"
#define MSG_AUTOTEMP "Auto. temp." #define MSG_MIN " \002 Min"
#define MSG_ON "Wl. " #define MSG_MAX " \002 Max"
#define MSG_OFF "Wyl." #define MSG_FACTOR " \002 Mnoznik"
#define MSG_PID_P "PID-P" #define MSG_AUTOTEMP "Auto. temp."
#define MSG_PID_I "PID-I" #define MSG_ON "Wl. "
#define MSG_PID_D "PID-D" #define MSG_OFF "Wyl."
#define MSG_PID_C "PID-C" #define MSG_PID_P "PID-P"
#define MSG_ACC "Acc" #define MSG_PID_I "PID-I"
#define MSG_VXY_JERK "Zryw Vxy" #define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
#define MSG_ACC "Acc"
#define MSG_VXY_JERK "Zryw Vxy"
#define MSG_VZ_JERK "Zryw Vz" #define MSG_VZ_JERK "Zryw Vz"
#define MSG_VE_JERK "Zryw Ve" #define MSG_VE_JERK "Zryw Ve"
#define MSG_VMAX "Vmax" #define MSG_VMAX "Vmax"
#define MSG_X "x" #define MSG_X "x"
#define MSG_Y "y" #define MSG_Y "y"
#define MSG_Z "z" #define MSG_Z "z"
#define MSG_E "e" #define MSG_E "e"
#define MSG_VMIN "Vmin" #define MSG_VMIN "Vmin"
#define MSG_VTRAV_MIN "Vskok min" #define MSG_VTRAV_MIN "Vskok min"
#define MSG_AMAX "Amax" #define MSG_AMAX "Amax"
#define MSG_A_RETRACT "A-wycofanie" #define MSG_A_RETRACT "A-wycofanie"
#define MSG_XSTEPS "krokiX/mm" #define MSG_XSTEPS "krokiX/mm"
#define MSG_YSTEPS "krokiY/mm" #define MSG_YSTEPS "krokiY/mm"
#define MSG_ZSTEPS "krokiZ/mm" #define MSG_ZSTEPS "krokiZ/mm"
#define MSG_ESTEPS "krokiE/mm" #define MSG_ESTEPS "krokiE/mm"
#define MSG_RECTRACT "Wycofanie" #define MSG_RECTRACT "Wycofanie"
#define MSG_TEMPERATURE "Temperatura" #define MSG_TEMPERATURE "Temperatura"
#define MSG_MOTION "Ruch" #define MSG_MOTION "Ruch"
#define MSG_STORE_EPROM "Zapisz w pamieci" #define MSG_CONTRAST "LCD contrast"
#define MSG_LOAD_EPROM "Wczytaj z pamieci" #define MSG_STORE_EPROM "Zapisz w pamieci"
#define MSG_RESTORE_FAILSAFE " Ustawienia fabryczne" #define MSG_LOAD_EPROM "Wczytaj z pamieci"
#define MSG_REFRESH "\004Odswiez" #define MSG_RESTORE_FAILSAFE " Ustawienia fabryczne"
#define MSG_WATCH "Obserwuj" #define MSG_REFRESH "\004Odswiez"
#define MSG_PREPARE "Przygotuj" #define MSG_WATCH "Obserwuj"
#define MSG_CONTROL "Kontroluj" #define MSG_PREPARE "Przygotuj"
#define MSG_TUNE "Strojenie" #define MSG_CONTROL "Kontroluj"
#define MSG_PAUSE_PRINT "Pauza" #define MSG_TUNE "Strojenie"
#define MSG_RESUME_PRINT "Wznowienie" #define MSG_PAUSE_PRINT "Pauza"
#define MSG_STOP_PRINT "Stop" #define MSG_RESUME_PRINT "Wznowienie"
#define MSG_CARD_MENU "Menu SDCard" #define MSG_STOP_PRINT "Stop"
#define MSG_NO_CARD "Brak karty" #define MSG_CARD_MENU "Menu SDCard"
#define MSG_DWELL "Uspij..." #define MSG_NO_CARD "Brak karty"
#define MSG_USERWAIT "Czekaj na uzytkownika..." #define MSG_DWELL "Uspij..."
#define MSG_RESUMING "Wznawiam drukowanie" #define MSG_USERWAIT "Czekaj na uzytkownika..."
#define MSG_NO_MOVE "Brak ruchu." #define MSG_RESUMING "Wznawiam drukowanie"
#define MSG_PART_RELEASE "Czesciowe zwolnienie" #define MSG_NO_MOVE "Brak ruchu."
#define MSG_KILLED "Ubity. " #define MSG_PART_RELEASE "Czesciowe zwolnienie"
#define MSG_STOPPED "Zatrzymany. " #define MSG_KILLED "Ubity. "
#define MSG_STEPPER_RELEASED "Zwolniony." #define MSG_STOPPED "Zatrzymany. "
#define MSG_CONTROL_RETRACT "Wycofaj mm" #define MSG_STEPPER_RELEASED "Zwolniony."
#define MSG_CONTROL_RETRACTF "Wycofaj F" #define MSG_CONTROL_RETRACT "Wycofaj mm"
#define MSG_CONTROL_RETRACT_ZLIFT "Skok Z mm:" #define MSG_CONTROL_RETRACTF "Wycofaj F"
#define MSG_CONTROL_RETRACT_RECOVER "Cof. wycof. +mm" #define MSG_CONTROL_RETRACT_ZLIFT "Skok Z mm:"
#define MSG_CONTROL_RETRACT_RECOVERF "Cof. wycof. F" #define MSG_CONTROL_RETRACT_RECOVER "Cof. wycof. +mm"
#define MSG_AUTORETRACT "Auto. wycofanie" #define MSG_CONTROL_RETRACT_RECOVERF "Cof. wycof. F"
#define MSG_FILAMENTCHANGE "Change filament" #define MSG_AUTORETRACT "Auto. wycofanie"
#define MSG_FILAMENTCHANGE "Change filament"
// Serial Console Messages #define MSG_INIT_SDCARD "Init. SD-Card"
#define MSG_CNG_SDCARD "Change SD-Card"
#define MSG_Enqueing "Kolejkowanie \""
#define MSG_POWERUP "Zasilanie wlaczone" // Serial Console Messages
#define MSG_EXTERNAL_RESET " Reset (zewnetrzny)"
#define MSG_BROWNOUT_RESET " Reset (spadek napiecia)" #define MSG_Enqueing "Kolejkowanie \""
#define MSG_WATCHDOG_RESET " Reset (watchdog)" #define MSG_POWERUP "Zasilanie wlaczone"
#define MSG_SOFTWARE_RESET " Reset (programowy)" #define MSG_EXTERNAL_RESET " Reset (zewnetrzny)"
#define MSG_MARLIN "Marlin " #define MSG_BROWNOUT_RESET " Reset (spadek napiecia)"
#define MSG_AUTHOR " | Autor: " #define MSG_WATCHDOG_RESET " Reset (watchdog)"
#define MSG_CONFIGURATION_VER " Ostatnia aktualizacja: " #define MSG_SOFTWARE_RESET " Reset (programowy)"
#define MSG_FREE_MEMORY " Wolna pamiec: " #define MSG_MARLIN "Marlin "
#define MSG_PLANNER_BUFFER_BYTES " Bufor planisty krokow (w bajtach): " #define MSG_AUTHOR " | Autor: "
#define MSG_OK "ok" #define MSG_CONFIGURATION_VER " Ostatnia aktualizacja: "
#define MSG_FILE_SAVED "Plik zapisany." #define MSG_FREE_MEMORY " Wolna pamiec: "
#define MSG_ERR_LINE_NO "Numer linijki nie jest ostatnim numerem linijki+1; ostatnia linijka:" #define MSG_PLANNER_BUFFER_BYTES " Bufor planisty krokow (w bajtach): "
#define MSG_ERR_CHECKSUM_MISMATCH "Niezgodna suma kontrolna; ostatnia linijka: " #define MSG_OK "ok"
#define MSG_ERR_NO_CHECKSUM "Brak sumy kontrolnej w linijce; ostatnia linijka:" #define MSG_FILE_SAVED "Plik zapisany."
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Brak numery linijki przy sumie kontrolnej; ostatnia linijka:" #define MSG_ERR_LINE_NO "Numer linijki nie jest ostatnim numerem linijki+1; ostatnia linijka:"
#define MSG_FILE_PRINTED "Ukonczono wydruk z pliku" #define MSG_ERR_CHECKSUM_MISMATCH "Niezgodna suma kontrolna; ostatnia linijka: "
#define MSG_BEGIN_FILE_LIST "Start listy plikow" #define MSG_ERR_NO_CHECKSUM "Brak sumy kontrolnej w linijce; ostatnia linijka:"
#define MSG_END_FILE_LIST "Koniec listy plikow" #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Brak numery linijki przy sumie kontrolnej; ostatnia linijka:"
#define MSG_M104_INVALID_EXTRUDER "M104 Niepoprawny ekstruder " #define MSG_FILE_PRINTED "Ukonczono wydruk z pliku"
#define MSG_M105_INVALID_EXTRUDER "M105 Niepoprawny ekstruder " #define MSG_BEGIN_FILE_LIST "Start listy plikow"
#define MSG_M218_INVALID_EXTRUDER "M218 Niepoprawny ekstruder " #define MSG_END_FILE_LIST "Koniec listy plikow"
#define MSG_ERR_NO_THERMISTORS "Brak termistorow - brak temperatury :(" #define MSG_M104_INVALID_EXTRUDER "M104 Niepoprawny ekstruder "
#define MSG_M109_INVALID_EXTRUDER "M109 Niepoprawny ekstruder " #define MSG_M105_INVALID_EXTRUDER "M105 Niepoprawny ekstruder "
#define MSG_HEATING "Nagrzewanie ekstrudera..." #define MSG_M218_INVALID_EXTRUDER "M218 Niepoprawny ekstruder "
#define MSG_HEATING_COMPLETE "Nagrzewanie ekstrudera zakonczone." #define MSG_ERR_NO_THERMISTORS "Brak termistorow - brak temperatury :("
#define MSG_BED_HEATING "Nagrzewanie loza..." #define MSG_M109_INVALID_EXTRUDER "M109 Niepoprawny ekstruder "
#define MSG_BED_DONE "Nagrzewanie loza zakonczone." #define MSG_HEATING "Nagrzewanie ekstrudera..."
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" #define MSG_HEATING_COMPLETE "Nagrzewanie ekstrudera zakonczone."
#define MSG_COUNT_X " Liczenie X: " #define MSG_BED_HEATING "Nagrzewanie loza..."
#define MSG_ERR_KILLED "Drukarka zatrzymana. Wywolano kill()" #define MSG_BED_DONE "Nagrzewanie loza zakonczone."
#define MSG_ERR_STOPPED "Drukarka zatrzymana z powodu bledu. Usun problem i zrestartuj drukartke komenda M999. (temperatura zostala zresetowana; ustaw temperature po restarcie)" #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
#define MSG_RESEND "Wyslij ponownie: " #define MSG_COUNT_X " Liczenie X: "
#define MSG_UNKNOWN_COMMAND "Nieznane polecenie: \"" #define MSG_ERR_KILLED "Drukarka zatrzymana. Wywolano kill()"
#define MSG_ACTIVE_EXTRUDER "Aktywny ekstruder: " #define MSG_ERR_STOPPED "Drukarka zatrzymana z powodu bledu. Usun problem i zrestartuj drukartke komenda M999. (temperatura zostala zresetowana; ustaw temperature po restarcie)"
#define MSG_INVALID_EXTRUDER "Niepoprawny ekstruder" #define MSG_RESEND "Wyslij ponownie: "
#define MSG_X_MIN "x_min: " #define MSG_UNKNOWN_COMMAND "Nieznane polecenie: \""
#define MSG_X_MAX "x_max: " #define MSG_ACTIVE_EXTRUDER "Aktywny ekstruder: "
#define MSG_Y_MIN "y_min: " #define MSG_INVALID_EXTRUDER "Niepoprawny ekstruder"
#define MSG_Y_MAX "y_max: " #define MSG_X_MIN "x_min: "
#define MSG_Z_MIN "z_min: " #define MSG_X_MAX "x_max: "
#define MSG_Z_MAX "z_max: " #define MSG_Y_MIN "y_min: "
#define MSG_M119_REPORT "Zgloszenie statusu wylacznikow krancowych" #define MSG_Y_MAX "y_max: "
#define MSG_ENDSTOP_HIT "WYZWOLONY" #define MSG_Z_MIN "z_min: "
#define MSG_ENDSTOP_OPEN "otwarty" #define MSG_Z_MAX "z_max: "
#define MSG_HOTEND_OFFSET "Hotend offsets:" #define MSG_M119_REPORT "Zgloszenie statusu wylacznikow krancowych"
#define MSG_ENDSTOP_HIT "WYZWOLONY"
#define MSG_SD_CANT_OPEN_SUBDIR "Nie mozna otworzyc podkatalogu" #define MSG_ENDSTOP_OPEN "otwarty"
#define MSG_SD_INIT_FAIL "Blad inicjalizacji karty SD" #define MSG_HOTEND_OFFSET "Hotend offsets:"
#define MSG_SD_VOL_INIT_FAIL "Blad inizjalizacji wolumenu"
#define MSG_SD_OPENROOT_FAIL "Blad odczytywania katalogu glownego" #define MSG_SD_CANT_OPEN_SUBDIR "Nie mozna otworzyc podkatalogu"
#define MSG_SD_CARD_OK "Karta SD zainicjalizowana" #define MSG_SD_INIT_FAIL "Blad inicjalizacji karty SD"
#define MSG_SD_WORKDIR_FAIL "Blad odczytywania katalogu roboczego" #define MSG_SD_VOL_INIT_FAIL "Blad inizjalizacji wolumenu"
#define MSG_SD_OPEN_FILE_FAIL "Nie mozna otworzyc pliku: " #define MSG_SD_OPENROOT_FAIL "Blad odczytywania katalogu glownego"
#define MSG_SD_FILE_OPENED "Otwarto plik:" #define MSG_SD_CARD_OK "Karta SD zainicjalizowana"
#define MSG_SD_SIZE " Rozmiar:" #define MSG_SD_WORKDIR_FAIL "Blad odczytywania katalogu roboczego"
#define MSG_SD_FILE_SELECTED "Wybrano plik" #define MSG_SD_OPEN_FILE_FAIL "Nie mozna otworzyc pliku: "
#define MSG_SD_WRITE_TO_FILE "Zapisywanie do pliku: " #define MSG_SD_FILE_OPENED "Otwarto plik:"
#define MSG_SD_PRINTING_BYTE "Drukowanie z karty SD, bajt " #define MSG_SD_SIZE " Rozmiar:"
#define MSG_SD_NOT_PRINTING "Nie trwa drukowanie z karty SD" #define MSG_SD_FILE_SELECTED "Wybrano plik"
#define MSG_SD_ERR_WRITE_TO_FILE "blad podczas zapisu do pliku" #define MSG_SD_WRITE_TO_FILE "Zapisywanie do pliku: "
#define MSG_SD_CANT_ENTER_SUBDIR "Nie mozna odczytac podkatalogu: " #define MSG_SD_PRINTING_BYTE "Drukowanie z karty SD, bajt "
#define MSG_SD_NOT_PRINTING "Nie trwa drukowanie z karty SD"
#define MSG_STEPPER_TO_HIGH "Za duza czestotliwosc krokow: " #define MSG_SD_ERR_WRITE_TO_FILE "blad podczas zapisu do pliku"
#define MSG_ENDSTOPS_HIT "Wylacznik krancowy zostal wyzwolony na pozycji: " #define MSG_SD_CANT_ENTER_SUBDIR "Nie mozna odczytac podkatalogu: "
#define MSG_ERR_COLD_EXTRUDE_STOP " uniemozliwiono zimna ekstruzje"
#define MSG_ERR_LONG_EXTRUDE_STOP " uniemozliwiono zbyt dluga ekstruzje" #define MSG_STEPPER_TOO_HIGH "Za duza czestotliwosc krokow: "
#define MSG_ENDSTOPS_HIT "Wylacznik krancowy zostal wyzwolony na pozycji: "
#endif #define MSG_ERR_COLD_EXTRUDE_STOP " uniemozliwiono zimna ekstruzje"
#define MSG_ERR_LONG_EXTRUDE_STOP " uniemozliwiono zbyt dluga ekstruzje"
#if LANGUAGE_CHOICE == 3 #endif
#define WELCOME_MSG MACHINE_NAME " Pret."
#define MSG_SD_INSERTED "Carte inseree" #if LANGUAGE_CHOICE == 3
#define MSG_SD_REMOVED "Carte retiree"
#define MSG_MAIN " Principal \003" #define WELCOME_MSG MACHINE_NAME " Pret."
#define MSG_AUTOSTART " Demarrage auto." #define MSG_SD_INSERTED "Carte inseree"
#define MSG_DISABLE_STEPPERS " Desactiver moteurs" #define MSG_SD_REMOVED "Carte retiree"
#define MSG_AUTO_HOME " Home auto." #define MSG_MAIN " Principal \003"
#define MSG_SET_ORIGIN " Regler origine" #define MSG_AUTOSTART " Demarrage auto."
#define MSG_PREHEAT_PLA " Prechauffage PLA" #define MSG_DISABLE_STEPPERS " Desactiver moteurs"
#define MSG_PREHEAT_PLA_SETTINGS " Regl. prechauffe PLA" #define MSG_AUTO_HOME " Home auto."
#define MSG_PREHEAT_ABS " Prechauffage ABS" #define MSG_SET_ORIGIN " Regler origine"
#define MSG_PREHEAT_ABS_SETTINGS " Regl. prechauffe ABS" #define MSG_PREHEAT_PLA " Prechauffage PLA"
#define MSG_COOLDOWN " Refroidissement" #define MSG_PREHEAT_PLA_SETTINGS " Regl. prechauffe PLA"
#define MSG_EXTRUDE " Extrusion" #define MSG_PREHEAT_ABS " Prechauffage ABS"
#define MSG_RETRACT " Retractation" #define MSG_PREHEAT_ABS_SETTINGS " Regl. prechauffe ABS"
#define MSG_PREHEAT_PLA " Prechauffage PLA" #define MSG_COOLDOWN " Refroidissement"
#define MSG_PREHEAT_ABS " Prechauffage ABS" #define MSG_SWITCH_PS_ON "Allumer alimentation"
#define MSG_MOVE_AXIS " Deplacer axe \x7E" #define MSG_SWITCH_PS_OFF "Eteindre alimentation"
#define MSG_SPEED " Vitesse:" #define MSG_EXTRUDE " Extrusion"
#define MSG_NOZZLE " \002Buse:" #define MSG_RETRACT " Retractation"
#define MSG_NOZZLE1 " \002Buse2:" #define MSG_PREHEAT_PLA " Prechauffage PLA"
#define MSG_NOZZLE2 " \002Buse3:" #define MSG_PREHEAT_ABS " Prechauffage ABS"
#define MSG_BED " \002Lit:" #define MSG_MOVE_AXIS " Deplacer axe \x7E"
#define MSG_FAN_SPEED " Vitesse ventilateur:" #define MSG_SPEED " Vitesse:"
#define MSG_FLOW " Flux:" #define MSG_NOZZLE " \002Buse:"
#define MSG_CONTROL " Controle \003" #define MSG_NOZZLE1 " \002Buse2:"
#define MSG_MIN " \002 Min:" #define MSG_NOZZLE2 " \002Buse3:"
#define MSG_MAX " \002 Max:" #define MSG_BED " \002Lit:"
#define MSG_FACTOR " \002 Facteur:" #define MSG_FAN_SPEED " Vitesse ventilateur:"
#define MSG_AUTOTEMP " Temp. Auto.:" #define MSG_FLOW " Flux:"
#define MSG_ON "Marche " #define MSG_CONTROL " Controle \003"
#define MSG_OFF "Arret" #define MSG_MIN " \002 Min:"
#define MSG_PID_P " PID-P: " #define MSG_MAX " \002 Max:"
#define MSG_PID_I " PID-I: " #define MSG_FACTOR " \002 Facteur:"
#define MSG_PID_D " PID-D: " #define MSG_AUTOTEMP " Temp. Auto.:"
#define MSG_PID_C " PID-C: " #define MSG_ON "Marche "
#define MSG_ACC " Acc:" #define MSG_OFF "Arret"
#define MSG_VXY_JERK "Vxy-jerk" #define MSG_PID_P " PID-P: "
#define MSG_VZ_JERK "Vz-jerk" #define MSG_PID_I " PID-I: "
#define MSG_VE_JERK "Ve-jerk" #define MSG_PID_D " PID-D: "
#define MSG_VMAX " Vmax " #define MSG_PID_C " PID-C: "
#define MSG_X "x:" #define MSG_ACC " Acc:"
#define MSG_Y "y:" #define MSG_VXY_JERK "Vxy-jerk"
#define MSG_Z "z:" #define MSG_VZ_JERK "Vz-jerk"
#define MSG_E "e:" #define MSG_VE_JERK "Ve-jerk"
#define MSG_VMIN " Vmin:" #define MSG_VMAX " Vmax "
#define MSG_VTRAV_MIN " Vdepl min:" #define MSG_X "x:"
#define MSG_AMAX " Amax " #define MSG_Y "y:"
#define MSG_A_RETRACT " A-retract:" #define MSG_Z "z:"
#define MSG_XSTEPS " Xpas/mm:" #define MSG_E "e:"
#define MSG_YSTEPS " Ypas/mm:" #define MSG_VMIN " Vmin:"
#define MSG_ZSTEPS " Zpas/mm:" #define MSG_VTRAV_MIN " Vdepl min:"
#define MSG_ESTEPS " Epas/mm:" #define MSG_AMAX " Amax "
#define MSG_MAIN_WIDE " Principal \003" #define MSG_A_RETRACT " A-retract:"
#define MSG_RECTRACT_WIDE " Rectractater \x7E" #define MSG_XSTEPS " Xpas/mm:"
#define MSG_TEMPERATURE_WIDE " Temperature \x7E" #define MSG_YSTEPS " Ypas/mm:"
#define MSG_TEMPERATURE_RTN " Temperature \003" #define MSG_ZSTEPS " Zpas/mm:"
#define MSG_MOTION_WIDE " Mouvement \x7E" #define MSG_ESTEPS " Epas/mm:"
#define MSG_STORE_EPROM " Sauvegarder memoire" #define MSG_MAIN_WIDE " Principal \003"
#define MSG_LOAD_EPROM " Lire memoire" #define MSG_RECTRACT "Rectracter"
#define MSG_RESTORE_FAILSAFE " Restaurer memoire" #define MSG_TEMPERATURE "Temperature"
#define MSG_REFRESH "\004Actualiser" #define MSG_MOTION "Mouvement"
#define MSG_WATCH " Surveiller \003" #define MSG_CONTRAST "LCD contrast"
#define MSG_PREPARE " Preparer \x7E" #define MSG_STORE_EPROM " Sauvegarder memoire"
#define MSG_PREPARE_ALT " Prepare \003" #define MSG_LOAD_EPROM " Lire memoire"
#define MSG_CONTROL_ARROW " Controle \x7E" #define MSG_RESTORE_FAILSAFE " Restaurer memoire"
#define MSG_RETRACT_ARROW " Retracter \x7E" #define MSG_REFRESH "\004Actualiser"
#define MSG_TUNE " Regler \x7E" #define MSG_WATCH " Surveiller \003"
#define MSG_PAUSE_PRINT " Pause impression \x7E" #define MSG_PREPARE " Preparer \x7E"
#define MSG_RESUME_PRINT " Reprendre impression \x7E" #define MSG_PREPARE_ALT " Prepare \003"
#define MSG_STOP_PRINT " Arreter impression \x7E" #define MSG_CONTROL_ARROW " Controle \x7E"
#define MSG_CARD_MENU " Menu carte \x7E" #define MSG_RETRACT_ARROW " Retracter \x7E"
#define MSG_NO_CARD " Pas de carte" #define MSG_TUNE " Regler \x7E"
#define MSG_DWELL "Repos..." #define MSG_PAUSE_PRINT " Pause impression \x7E"
#define MSG_USERWAIT "Attente de l'utilisateur..." #define MSG_RESUME_PRINT " Reprendre impression \x7E"
#define MSG_NO_MOVE "Aucun mouvement." #define MSG_STOP_PRINT " Arreter impression \x7E"
#define MSG_PART_RELEASE "Relache partielle" #define MSG_CARD_MENU " Menu carte \x7E"
#define MSG_KILLED "TUE." #define MSG_NO_CARD " Pas de carte"
#define MSG_STOPPED "STOPPE." #define MSG_DWELL "Repos..."
#define MSG_STEPPER_RELEASED "RELACHE." #define MSG_USERWAIT "Attente de l'utilisateur..."
#define MSG_CONTROL_RETRACT " Retractation mm:" #define MSG_RESUMING "Reprise de l'impression"
#define MSG_CONTROL_RETRACTF " Retractation F:" #define MSG_NO_MOVE "Aucun mouvement."
#define MSG_CONTROL_RETRACT_ZLIFT " Hop mm:" #define MSG_PART_RELEASE "Relache partielle"
#define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:" #define MSG_KILLED "TUE."
#define MSG_CONTROL_RETRACT_RECOVERF " UnRet F:" #define MSG_STOPPED "STOPPE."
#define MSG_AUTORETRACT " Retract. Auto.:" #define MSG_STEPPER_RELEASED "RELACHE."
#define MSG_FILAMENTCHANGE "Change filament" #define MSG_CONTROL_RETRACT " Retractation mm:"
#define MSG_CONTROL_RETRACTF " Retractation F:"
// Serial Console Messages #define MSG_CONTROL_RETRACT_ZLIFT " Hop mm:"
#define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:"
#define MSG_Enqueing "Mise en tampon \"" #define MSG_CONTROL_RETRACT_RECOVERF " UnRet F:"
#define MSG_POWERUP "Allumage" #define MSG_AUTORETRACT " Retract. Auto.:"
#define MSG_EXTERNAL_RESET " RAZ Externe" #define MSG_FILAMENTCHANGE "Change filament"
#define MSG_BROWNOUT_RESET " RAZ defaut alim." #define MSG_INIT_SDCARD "Init. la carte SD"
#define MSG_WATCHDOG_RESET " RAZ Watchdog" #define MSG_CNG_SDCARD "Changer de carte SD"
#define MSG_SOFTWARE_RESET " RAZ logicielle"
#define MSG_MARLIN "Marlin " // Serial Console Messages
#define MSG_AUTHOR " | Auteur: "
#define MSG_CONFIGURATION_VER " Derniere MaJ: " #define MSG_Enqueing "Mise en tampon \""
#define MSG_FREE_MEMORY " Memoire libre: " #define MSG_POWERUP "Allumage"
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " #define MSG_EXTERNAL_RESET " RAZ Externe"
#define MSG_OK "ok" #define MSG_BROWNOUT_RESET " RAZ defaut alim."
#define MSG_FILE_SAVED "Fichier enregistre." #define MSG_WATCHDOG_RESET " RAZ Watchdog"
#define MSG_ERR_LINE_NO "Le numero de ligne n'est pas la derniere ligne + 1, derniere ligne: " #define MSG_SOFTWARE_RESET " RAZ logicielle"
#define MSG_ERR_CHECKSUM_MISMATCH "Erreur somme de controle, derniere ligne: " #define MSG_MARLIN "Marlin "
#define MSG_ERR_NO_CHECKSUM "Pas de somme de controle avec le numero de ligne, derniere ligne: " #define MSG_AUTHOR " | Auteur: "
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Pas de numero de ligne avec somme de controle, derniere ligne: " #define MSG_CONFIGURATION_VER " Derniere MaJ: "
#define MSG_FILE_PRINTED "Impression terminee" #define MSG_FREE_MEMORY " Memoire libre: "
#define MSG_BEGIN_FILE_LIST "Debut de la liste de fichiers" #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
#define MSG_END_FILE_LIST "Fin de la liste de fichiers" #define MSG_OK "ok"
#define MSG_M104_INVALID_EXTRUDER "M104 Extruder invalide" #define MSG_FILE_SAVED "Fichier enregistre."
#define MSG_M105_INVALID_EXTRUDER "M105 Extruder invalide" #define MSG_ERR_LINE_NO "Le numero de ligne n'est pas la derniere ligne + 1, derniere ligne: "
#define MSG_M218_INVALID_EXTRUDER "M218 Extruder invalide" #define MSG_ERR_CHECKSUM_MISMATCH "Erreur somme de controle, derniere ligne: "
#define MSG_ERR_NO_THERMISTORS "Pas de thermistor, pas de temperature" #define MSG_ERR_NO_CHECKSUM "Pas de somme de controle avec le numero de ligne, derniere ligne: "
#define MSG_M109_INVALID_EXTRUDER "M109 Extruder invalide " #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Pas de numero de ligne avec somme de controle, derniere ligne: "
#define MSG_HEATING "En chauffe..." #define MSG_FILE_PRINTED "Impression terminee"
#define MSG_HEATING_COMPLETE "Chauffe terminee." #define MSG_BEGIN_FILE_LIST "Debut de la liste de fichiers"
#define MSG_BED_HEATING "Chauffe du lit." #define MSG_END_FILE_LIST "Fin de la liste de fichiers"
#define MSG_BED_DONE "Chauffe du lit terminee." #define MSG_M104_INVALID_EXTRUDER "M104 Extruder invalide"
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" #define MSG_M105_INVALID_EXTRUDER "M105 Extruder invalide"
#define MSG_COUNT_X " Compteur X: " #define MSG_M218_INVALID_EXTRUDER "M218 Extruder invalide"
#define MSG_ERR_KILLED "Impression arretee. kill() appelee!" #define MSG_ERR_NO_THERMISTORS "Pas de thermistor, pas de temperature"
#define MSG_ERR_STOPPED "Impression arretee a cause d'erreurs. Corriger les erreurs et utiliser M999 pour la reprendre. (Temperature remise a zero. Reactivez la apres redemarrage)" #define MSG_M109_INVALID_EXTRUDER "M109 Extruder invalide "
#define MSG_RESEND "Renvoie: " #define MSG_HEATING "En chauffe..."
#define MSG_UNKNOWN_COMMAND "Commande inconnue: \"" #define MSG_HEATING_COMPLETE "Chauffe terminee."
#define MSG_ACTIVE_EXTRUDER "Extrudeur actif: " #define MSG_BED_HEATING "Chauffe du lit."
#define MSG_INVALID_EXTRUDER "Extrudeur invalide" #define MSG_BED_DONE "Chauffe du lit terminee."
#define MSG_X_MIN "x_min: " #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
#define MSG_X_MAX "x_max: " #define MSG_COUNT_X " Compteur X: "
#define MSG_Y_MIN "y_min: " #define MSG_ERR_KILLED "Impression arretee. kill() appelee!"
#define MSG_Y_MAX "y_max: " #define MSG_ERR_STOPPED "Impression arretee a cause d'erreurs. Corriger les erreurs et utiliser M999 pour la reprendre. (Temperature remise a zero. Reactivez la apres redemarrage)"
#define MSG_Z_MIN "z_min: " #define MSG_RESEND "Renvoie: "
#define MSG_Z_MAX "z_max: " #define MSG_UNKNOWN_COMMAND "Commande inconnue: \""
#define MSG_M119_REPORT "Affichage du status des fin de course" #define MSG_ACTIVE_EXTRUDER "Extrudeur actif: "
#define MSG_ENDSTOP_HIT "DECLENCHE" #define MSG_INVALID_EXTRUDER "Extrudeur invalide"
#define MSG_ENDSTOP_OPEN "OUVERT" #define MSG_X_MIN "x_min: "
#define MSG_HOTEND_OFFSET "Hotend offsets:" #define MSG_X_MAX "x_max: "
#define MSG_Y_MIN "y_min: "
#define MSG_SD_CANT_OPEN_SUBDIR "Impossible d'ouvrir le sous-repertoire" #define MSG_Y_MAX "y_max: "
#define MSG_SD_INIT_FAIL "Echec de l'initialisation de la SD" #define MSG_Z_MIN "z_min: "
#define MSG_SD_VOL_INIT_FAIL "Echec de volume.init" #define MSG_Z_MAX "z_max: "
#define MSG_SD_OPENROOT_FAIL "Echec openRoot" #define MSG_M119_REPORT "Affichage du status des fin de course"
#define MSG_SD_CARD_OK "Carte SD Ok" #define MSG_ENDSTOP_HIT "DECLENCHE"
#define MSG_SD_WORKDIR_FAIL "Echec d'ouverture workDir" #define MSG_ENDSTOP_OPEN "OUVERT"
#define MSG_SD_OPEN_FILE_FAIL "Echec d'ouverture, Fichier: " #define MSG_HOTEND_OFFSET "Hotend offsets:"
#define MSG_SD_FILE_OPENED "Fichier ouvert: "
#define MSG_SD_SIZE " Taille: " #define MSG_SD_CANT_OPEN_SUBDIR "Impossible d'ouvrir le sous-repertoire"
#define MSG_SD_FILE_SELECTED "Fichier selectionne" #define MSG_SD_INIT_FAIL "Echec de l'initialisation de la SD"
#define MSG_SD_WRITE_TO_FILE "Ecriture dans le fichier: " #define MSG_SD_VOL_INIT_FAIL "Echec de volume.init"
#define MSG_SD_PRINTING_BYTE "Octet impression SD " #define MSG_SD_OPENROOT_FAIL "Echec openRoot"
#define MSG_SD_NOT_PRINTING "Pas d'impression SD" #define MSG_SD_CARD_OK "Carte SD Ok"
#define MSG_SD_ERR_WRITE_TO_FILE "Erreur d'ecriture dans le fichier" #define MSG_SD_WORKDIR_FAIL "Echec d'ouverture workDir"
#define MSG_SD_CANT_ENTER_SUBDIR "Impossible d'entrer dans le sous-repertoire: " #define MSG_SD_OPEN_FILE_FAIL "Echec d'ouverture, Fichier: "
#define MSG_SD_FILE_OPENED "Fichier ouvert: "
#define MSG_STEPPER_TO_HIGH "Steprate trop eleve: " #define MSG_SD_SIZE " Taille: "
#define MSG_ENDSTOPS_HIT "Fin de course atteint: " #define MSG_SD_FILE_SELECTED "Fichier selectionne"
#define MSG_ERR_COLD_EXTRUDE_STOP " Extrusion a froid evitee" #define MSG_SD_WRITE_TO_FILE "Ecriture dans le fichier: "
#define MSG_ERR_LONG_EXTRUDE_STOP " Extrusion longue evitee" #define MSG_SD_PRINTING_BYTE "Octet impression SD "
#define MSG_SD_NOT_PRINTING "Pas d'impression SD"
#endif #define MSG_SD_ERR_WRITE_TO_FILE "Erreur d'ecriture dans le fichier"
#define MSG_SD_CANT_ENTER_SUBDIR "Impossible d'entrer dans le sous-repertoire: "
#if LANGUAGE_CHOICE == 4 #define MSG_STEPPER_TOO_HIGH "Steprate trop eleve: "
#define MSG_ENDSTOPS_HIT "Fin de course atteint: "
// LCD Menu Messages #define MSG_ERR_COLD_EXTRUDE_STOP " Extrusion a froid evitee"
#define MSG_ERR_LONG_EXTRUDE_STOP " Extrusion longue evitee"
#define WELCOME_MSG MACHINE_NAME " Bereit."
#endif
#define MSG_SD_INSERTED "SDKarte erkannt"
#define MSG_SD_REMOVED "SDKarte entfernt"
#define MSG_MAIN "Hauptmneü" #if LANGUAGE_CHOICE == 4
#define MSG_AUTOSTART "Autostart"
#define MSG_DISABLE_STEPPERS "Stepper abschalten" // LCD Menu Messages
#define MSG_AUTO_HOME "Auto Nullpunkt"
#define MSG_SET_ORIGIN "Setze Nullpunkt" #define WELCOME_MSG MACHINE_NAME " Bereit."
#define MSG_PREHEAT_PLA "Vorwärmen PLA"
#define MSG_PREHEAT_PLA_SETTINGS "Vorwärmen PLA Einstellungen" #define MSG_SD_INSERTED "SDKarte erkannt"
#define MSG_PREHEAT_ABS "Vorwärmen ABS" #define MSG_SD_REMOVED "SDKarte entfernt"
#define MSG_PREHEAT_ABS_SETTINGS "Vorwärmen ABS Einstellungen" #define MSG_MAIN "Hauptmenü"
#define MSG_COOLDOWN "Abkühlen" #define MSG_AUTOSTART "Autostart"
#define MSG_EXTRUDE "Extrude" #define MSG_DISABLE_STEPPERS "Stepper abschalten"
#define MSG_RETRACT "Retract" #define MSG_AUTO_HOME "Auto Nullpunkt"
#define MSG_MOVE_AXIS "Achsen bewegen" #define MSG_SET_ORIGIN "Setze Nullpunkt"
#define MSG_SPEED "Geschw" #define MSG_PREHEAT_PLA "Vorwärmen PLA"
#define MSG_NOZZLE "Düse" #define MSG_PREHEAT_PLA_SETTINGS "Vorwärmen PLA Einstellungen"
#define MSG_NOZZLE1 "Düse2" #define MSG_PREHEAT_ABS "Vorwärmen ABS"
#define MSG_NOZZLE2 "Düse3" #define MSG_PREHEAT_ABS_SETTINGS "Vorwärmen ABS Einstellungen"
#define MSG_BED "Bett" #define MSG_COOLDOWN "Abkühlen"
#define MSG_FAN_SPEED "Lüftergeschw." #define MSG_SWITCH_PS_ON "Switch Power On"
#define MSG_FLOW "Fluß" #define MSG_SWITCH_PS_OFF "Switch Power Off"
#define MSG_CONTROL "Einstellungen" #define MSG_EXTRUDE "Extrude"
#define MSG_MIN "\002 Min" #define MSG_RETRACT "Retract"
#define MSG_MAX "\002 Max" #define MSG_MOVE_AXIS "Achsen bewegen"
#define MSG_FACTOR "\002 Faktor" #define MSG_SPEED "Geschw"
#define MSG_AUTOTEMP "AutoTemp" #define MSG_NOZZLE "Düse"
#define MSG_ON "Ein" #define MSG_NOZZLE1 "Düse2"
#define MSG_OFF "Aus" #define MSG_NOZZLE2 "Düse3"
#define MSG_PID_P "PID-P" #define MSG_BED "Bett"
#define MSG_PID_I "PID-I" #define MSG_FAN_SPEED "Lüftergeschw."
#define MSG_PID_D "PID-D" #define MSG_FLOW "Fluss"
#define MSG_PID_C "PID-C" #define MSG_CONTROL "Einstellungen"
#define MSG_ACC "Acc" #define MSG_MIN "\002 Min"
#define MSG_VXY_JERK "Vxy-jerk" #define MSG_MAX "\002 Max"
#define MSG_FACTOR "\002 Faktor"
#define MSG_AUTOTEMP "AutoTemp"
#define MSG_ON "Ein"
#define MSG_OFF "Aus"
#define MSG_PID_P "PID-P"
#define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
#define MSG_ACC "Acc"
#define MSG_VXY_JERK "Vxy-jerk"
#define MSG_VZ_JERK "Vz-jerk" #define MSG_VZ_JERK "Vz-jerk"
#define MSG_VE_JERK "Ve-jerk" #define MSG_VE_JERK "Ve-jerk"
#define MSG_VMAX "Vmax " #define MSG_VMAX "Vmax "
#define MSG_X "x" #define MSG_X "x"
#define MSG_Y "y" #define MSG_Y "y"
#define MSG_Z "z" #define MSG_Z "z"
#define MSG_E "e" #define MSG_E "e"
#define MSG_VMIN "Vmin" #define MSG_VMIN "Vmin"
#define MSG_VTRAV_MIN "VTrav min" #define MSG_VTRAV_MIN "VTrav min"
#define MSG_AMAX "Amax " #define MSG_AMAX "Amax "
#define MSG_A_RETRACT "A-Retract" #define MSG_A_RETRACT "A-Retract"
#define MSG_XSTEPS "Xsteps/mm" #define MSG_XSTEPS "Xsteps/mm"
#define MSG_YSTEPS "Ysteps/mm" #define MSG_YSTEPS "Ysteps/mm"
#define MSG_ZSTEPS "Zsteps/mm" #define MSG_ZSTEPS "Zsteps/mm"
#define MSG_ESTEPS "Esteps/mm" #define MSG_ESTEPS "Esteps/mm"
#define MSG_RECTRACT_WIDE "Rectract" #define MSG_RECTRACT_WIDE "Rectract"
#define MSG_WATCH "Beobachten" #define MSG_WATCH "Beobachten"
#define MSG_TEMPERATURE "Temperatur" #define MSG_TEMPERATURE "Temperatur"
#define MSG_MOTION "Bewegung" #define MSG_MOTION "Bewegung"
#define MSG_STORE_EPROM "EPROM speichern" #define MSG_CONTRAST "LCD contrast"
#define MSG_LOAD_EPROM "EPROM laden" #define MSG_STORE_EPROM "EPROM speichern"
#define MSG_RESTORE_FAILSAFE "Standardkonfig." #define MSG_LOAD_EPROM "EPROM laden"
#define MSG_REFRESH "Aktualisieren" #define MSG_RESTORE_FAILSAFE "Standardkonfig."
#define MSG_PREPARE "Vorbereitung" #define MSG_REFRESH "Aktualisieren"
#define MSG_CONTROL "Einstellungen" #define MSG_PREPARE "Vorbereitung"
#define MSG_TUNE "Justierung" #define MSG_CONTROL "Einstellungen"
#define MSG_PAUSE_PRINT "Druck anhalten" #define MSG_TUNE "Justierung"
#define MSG_RESUME_PRINT "Druck fortsetz" #define MSG_PAUSE_PRINT "Druck anhalten"
#define MSG_STOP_PRINT "Druck stoppen" #define MSG_RESUME_PRINT "Druck fortsetz"
#define MSG_CARD_MENU "SDKarten Menü" #define MSG_STOP_PRINT "Druck stoppen"
#define MSG_NO_CARD "Keine SDKarte" #define MSG_CARD_MENU "SDKarten Menü"
#define MSG_DWELL "Warten..." #define MSG_NO_CARD "Keine SDKarte"
#define MSG_USERWAIT "Warte auf Nutzer..." #define MSG_DWELL "Warten..."
#define MSG_RESUMING "Druck fortsetzung" #define MSG_USERWAIT "Warte auf Nutzer..."
#define MSG_NO_MOVE "Kein Zug." #define MSG_RESUMING "Druck fortsetzung"
#define MSG_PART_RELEASE "Stepper tlw frei" #define MSG_NO_MOVE "Kein Zug."
#define MSG_KILLED "KILLED" #define MSG_PART_RELEASE "Stepper tlw frei"
#define MSG_STOPPED "GESTOPPT" #define MSG_KILLED "KILLED"
#define MSG_STEPPER_RELEASED "Stepper frei" #define MSG_STOPPED "GESTOPPT"
#define MSG_CONTROL_RETRACT "Retract mm" #define MSG_STEPPER_RELEASED "Stepper frei"
#define MSG_CONTROL_RETRACTF "Retract F" #define MSG_CONTROL_RETRACT "Retract mm"
#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm" #define MSG_CONTROL_RETRACTF "Retract F"
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm" #define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet F" #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
#define MSG_AUTORETRACT "AutoRetr." #define MSG_CONTROL_RETRACT_RECOVERF "UnRet F"
#define MSG_FILAMENTCHANGE "Filament wechseln" #define MSG_AUTORETRACT "AutoRetr."
#define MSG_FILAMENTCHANGE "Filament wechseln"
// Serial Console Messages #define MSG_INIT_SDCARD "Init. SD-Card"
#define MSG_CNG_SDCARD "Change SD-Card"
#define MSG_Enqueing "enqueing \""
#define MSG_POWERUP "PowerUp" // Serial Console Messages
#define MSG_EXTERNAL_RESET " External Reset"
#define MSG_BROWNOUT_RESET " Brown out Reset" #define MSG_Enqueing "enqueing \""
#define MSG_WATCHDOG_RESET " Watchdog Reset" #define MSG_POWERUP "PowerUp"
#define MSG_SOFTWARE_RESET " Software Reset" #define MSG_EXTERNAL_RESET " External Reset"
#define MSG_MARLIN "Marlin: " #define MSG_BROWNOUT_RESET " Brown out Reset"
#define MSG_AUTHOR " | Author: " #define MSG_WATCHDOG_RESET " Watchdog Reset"
#define MSG_CONFIGURATION_VER " Last Updated: " #define MSG_SOFTWARE_RESET " Software Reset"
#define MSG_FREE_MEMORY " Free Memory: " #define MSG_MARLIN "Marlin: "
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " #define MSG_AUTHOR " | Author: "
#define MSG_OK "ok" #define MSG_CONFIGURATION_VER " Last Updated: "
#define MSG_FILE_SAVED "Done saving file." #define MSG_FREE_MEMORY " Free Memory: "
#define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line:" #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
#define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line:" #define MSG_OK "ok"
#define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line:" #define MSG_FILE_SAVED "Done saving file."
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line:" #define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line:"
#define MSG_FILE_PRINTED "Done printing file" #define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line:"
#define MSG_BEGIN_FILE_LIST "Begin file list" #define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line:"
#define MSG_END_FILE_LIST "End file list" #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line:"
#define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder " #define MSG_FILE_PRINTED "Done printing file"
#define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder " #define MSG_BEGIN_FILE_LIST "Begin file list"
#define MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder " #define MSG_END_FILE_LIST "End file list"
#define MSG_ERR_NO_THERMISTORS "No thermistors - no temp" #define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
#define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder " #define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
#define MSG_HEATING "Heating..." #define MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder "
#define MSG_HEATING_COMPLETE "Heating done." #define MSG_ERR_NO_THERMISTORS "No thermistors - no temp"
#define MSG_BED_HEATING "Bed Heating." #define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
#define MSG_BED_DONE "Bed done." #define MSG_HEATING "Heating..."
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" #define MSG_HEATING_COMPLETE "Heating done."
#define MSG_COUNT_X " Count X:" #define MSG_BED_HEATING "Bed Heating."
#define MSG_ERR_KILLED "Printer halted. kill() called !!" #define MSG_BED_DONE "Bed done."
#define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart!" #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
#define MSG_RESEND "Resend:" #define MSG_COUNT_X " Count X:"
#define MSG_UNKNOWN_COMMAND "Unknown command:\"" #define MSG_ERR_KILLED "Printer halted. kill() called !!"
#define MSG_ACTIVE_EXTRUDER "Active Extruder: " #define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart!"
#define MSG_INVALID_EXTRUDER "Invalid extruder" #define MSG_RESEND "Resend:"
#define MSG_X_MIN "x_min: " #define MSG_UNKNOWN_COMMAND "Unknown command:\""
#define MSG_X_MAX "x_max: " #define MSG_ACTIVE_EXTRUDER "Active Extruder: "
#define MSG_Y_MIN "y_min: " #define MSG_INVALID_EXTRUDER "Invalid extruder"
#define MSG_Y_MAX "y_max: " #define MSG_X_MIN "x_min: "
#define MSG_Z_MIN "z_min: " #define MSG_X_MAX "x_max: "
#define MSG_Z_MAX "z_max: " #define MSG_Y_MIN "y_min: "
#define MSG_M119_REPORT "Reporting endstop status" #define MSG_Y_MAX "y_max: "
#define MSG_ENDSTOP_HIT "TRIGGERED" #define MSG_Z_MIN "z_min: "
#define MSG_ENDSTOP_OPEN "open" #define MSG_Z_MAX "z_max: "
#define MSG_HOTEND_OFFSET "Hotend offsets:" #define MSG_M119_REPORT "Reporting endstop status"
#define MSG_ENDSTOP_HIT "TRIGGERED"
#define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir" #define MSG_ENDSTOP_OPEN "open"
#define MSG_SD_INIT_FAIL "SD init fail" #define MSG_HOTEND_OFFSET "Hotend offsets:"
#define MSG_SD_VOL_INIT_FAIL "volume.init failed"
#define MSG_SD_OPENROOT_FAIL "openRoot failed" #define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
#define MSG_SD_CARD_OK "SD card ok" #define MSG_SD_INIT_FAIL "SD init fail"
#define MSG_SD_WORKDIR_FAIL "workDir open failed" #define MSG_SD_VOL_INIT_FAIL "volume.init failed"
#define MSG_SD_OPEN_FILE_FAIL "open failed, File: " #define MSG_SD_OPENROOT_FAIL "openRoot failed"
#define MSG_SD_FILE_OPENED "File opened:" #define MSG_SD_CARD_OK "SD card ok"
#define MSG_SD_SIZE " Size:" #define MSG_SD_WORKDIR_FAIL "workDir open failed"
#define MSG_SD_FILE_SELECTED "File selected" #define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
#define MSG_SD_WRITE_TO_FILE "Writing to file: " #define MSG_SD_FILE_OPENED "File opened:"
#define MSG_SD_PRINTING_BYTE "SD printing byte " #define MSG_SD_SIZE " Size:"
#define MSG_SD_NOT_PRINTING "Not SD printing" #define MSG_SD_FILE_SELECTED "File selected"
#define MSG_SD_ERR_WRITE_TO_FILE "error writing to file" #define MSG_SD_WRITE_TO_FILE "Writing to file: "
#define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir:" #define MSG_SD_PRINTING_BYTE "SD printing byte "
#define MSG_SD_NOT_PRINTING "Not SD printing"
#define MSG_STEPPER_TO_HIGH "Steprate to high : " #define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
#define MSG_ENDSTOPS_HIT "endstops hit: " #define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir:"
#define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
#define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented" #define MSG_STEPPER_TOO_HIGH "Steprate too high : "
#define MSG_ENDSTOPS_HIT "endstops hit: "
#endif #define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
#define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"
#if LANGUAGE_CHOICE == 5 #endif
// LCD Menu Messages
#define WELCOME_MSG MACHINE_NAME " Lista." #if LANGUAGE_CHOICE == 5
#define MSG_SD_INSERTED "Tarjeta SD Colocada"
#define MSG_SD_REMOVED "Tarjeta SD Retirada" // LCD Menu Messages
#define MSG_MAIN " Menu Principal \003" #define WELCOME_MSG MACHINE_NAME "Lista."
#define MSG_AUTOSTART " Autostart" #define MSG_SD_INSERTED "Tarjeta SD Colocada"
#define MSG_DISABLE_STEPPERS " Apagar Motores" #define MSG_SD_REMOVED "Tarjeta SD Retirada"
#define MSG_AUTO_HOME " Llevar Ejes al Cero" #define MSG_MAIN "Menu Principal"
#define MSG_SET_ORIGIN " Establecer Cero" #define MSG_AUTOSTART " Autostart"
#define MSG_COOLDOWN " Enfriar" #define MSG_DISABLE_STEPPERS "Apagar Motores"
#define MSG_EXTRUDE " Extruir" #define MSG_AUTO_HOME "Llevar al Origen" // "Llevar Ejes al Cero"
#define MSG_RETRACT " Retraer" #define MSG_SET_ORIGIN "Establecer Cero"
#define MSG_PREHEAT_PLA " Precalentar PLA" #define MSG_PREHEAT_PLA "Precalentar PLA"
#define MSG_PREHEAT_PLA_SETTINGS " Ajustar temp. PLA" #define MSG_PREHEAT_PLA_SETTINGS "Ajustar temp. PLA"
#define MSG_PREHEAT_ABS " Precalentar ABS" #define MSG_PREHEAT_ABS "Precalentar ABS"
#define MSG_PREHEAT_ABS_SETTINGS " Ajustar temp. ABS" #define MSG_PREHEAT_ABS_SETTINGS "Ajustar temp. ABS"
#define MSG_MOVE_AXIS " Mover Ejes \x7E" #define MSG_COOLDOWN "Enfriar"
#define MSG_SPEED " Velocidad:" #define MSG_SWITCH_PS_ON "Switch Power On"
#define MSG_NOZZLE " \002Nozzle:" #define MSG_SWITCH_PS_OFF "Switch Power Off"
#define MSG_NOZZLE1 " \002Nozzle2:" #define MSG_EXTRUDE "Extruir"
#define MSG_NOZZLE2 " \002Nozzle3:" #define MSG_RETRACT "Retraer"
#define MSG_BED " \002Base:" #define MSG_MOVE_AXIS "Mover Ejes"
#define MSG_FAN_SPEED " Ventilador:" #define MSG_SPEED "Velocidad"
#define MSG_FLOW " Flujo:" #define MSG_NOZZLE "Nozzle"
#define MSG_CONTROL " Control \003" #define MSG_NOZZLE1 "Nozzle2"
#define MSG_MIN " \002 Min:" #define MSG_NOZZLE2 "Nozzle3"
#define MSG_MAX " \002 Max:" #define MSG_BED "Base"
#define MSG_FACTOR " \002 Fact:" #define MSG_FAN_SPEED "Ventilador"
#define MSG_AUTOTEMP " Autotemp:" #define MSG_FLOW "Flujo"
#define MSG_ON "On " #define MSG_CONTROL "Control"
#define MSG_OFF "Off" #define MSG_MIN "\002 Min"
#define MSG_PID_P " PID-P: " #define MSG_MAX "\002 Max"
#define MSG_PID_I " PID-I: " #define MSG_FACTOR "\002 Fact"
#define MSG_PID_D " PID-D: " #define MSG_AUTOTEMP "Autotemp"
#define MSG_PID_C " PID-C: " #define MSG_ON "On"
#define MSG_ACC " Acc:" #define MSG_OFF "Off"
#define MSG_VXY_JERK " Vxy-jerk: " #define MSG_PID_P "PID-P"
#define MSG_VZ_JERK "Vz-jerk" #define MSG_PID_I "PID-I"
#define MSG_VE_JERK "Ve-jerk" #define MSG_PID_D "PID-D"
#define MSG_VMAX " Vmax " #define MSG_PID_C "PID-C"
#define MSG_X "x:" #define MSG_ACC "Acel"
#define MSG_Y "y:" #define MSG_VXY_JERK "Vxy-jerk"
#define MSG_Z "z:" #define MSG_VZ_JERK "Vz-jerk"
#define MSG_E "e:" #define MSG_VE_JERK "Ve-jerk"
#define MSG_VMIN " Vmin:" #define MSG_VMAX "Vmax"
#define MSG_VTRAV_MIN " VTrav min:" #define MSG_X "x"
#define MSG_AMAX " Amax " #define MSG_Y "y"
#define MSG_A_RETRACT " A-retrac.:" #define MSG_Z "z"
#define MSG_XSTEPS " Xpasos/mm:" #define MSG_E "e"
#define MSG_YSTEPS " Ypasos/mm:" #define MSG_VMIN "Vmin"
#define MSG_ZSTEPS " Zpasos/mm:" #define MSG_VTRAV_MIN "VTrav min"
#define MSG_ESTEPS " Epasos/mm:" #define MSG_AMAX "Amax"
#define MSG_MAIN_WIDE " Menu Principal \003" #define MSG_A_RETRACT "A-retrac."
#define MSG_RECTRACT_WIDE " Retraer \x7E" #define MSG_XSTEPS "X pasos/mm"
#define MSG_TEMPERATURE_WIDE " Temperatura \x7E" #define MSG_YSTEPS "Y pasos/mm"
#define MSG_TEMPERATURE_RTN " Temperatura \003" #define MSG_ZSTEPS "Z pasos/mm"
#define MSG_MOTION_WIDE " Movimiento \x7E" #define MSG_ESTEPS "E pasos/mm"
#define MSG_STORE_EPROM " Guardar Memoria" #define MSG_RECTRACT "Retraer"
#define MSG_LOAD_EPROM " Cargar Memoria" #define MSG_TEMPERATURE "Temperatura"
#define MSG_RESTORE_FAILSAFE " Rest. de emergencia" #define MSG_MOTION "Movimiento"
#define MSG_REFRESH "\004Volver a cargar" #define MSG_STORE_EPROM "Guardar Memoria"
#define MSG_WATCH " Monitorizar \003" #define MSG_LOAD_EPROM "Cargar Memoria"
#define MSG_PREPARE " Preparar \x7E" #define MSG_RESTORE_FAILSAFE "Rest. de emergencia"
#define MSG_PREPARE_ALT " Preparar \003" #define MSG_REFRESH "Volver a cargar"
#define MSG_CONTROL_ARROW " Control \x7E" #define MSG_WATCH "Monitorizar"
#define MSG_RETRACT_ARROW " Retraer \x7E" #define MSG_PREPARE "Preparar"
#define MSG_TUNE " Ajustar \x7E" #define MSG_TUNE "Ajustar"
#define MSG_PAUSE_PRINT " Pausar Impresion \x7E" #define MSG_PAUSE_PRINT "Pausar Impresion"
#define MSG_RESUME_PRINT " Reanudar Impresion \x7E" #define MSG_RESUME_PRINT "Reanudar Impresion"
#define MSG_STOP_PRINT " Detener Impresion \x7E" #define MSG_STOP_PRINT "Detener Impresion"
#define MSG_CARD_MENU " Menu de SD \x7E" #define MSG_CARD_MENU "Menu de SD"
#define MSG_NO_CARD " No hay Tarjeta SD" #define MSG_NO_CARD "No hay Tarjeta SD"
#define MSG_DWELL "Reposo..." #define MSG_DWELL "Reposo..."
#define MSG_USERWAIT "Esperando Ordenes..." #define MSG_USERWAIT "Esperando Ordenes..."
#define MSG_NO_MOVE "Sin movimiento" #define MSG_RESUMING "Resumiendo Impresion"
#define MSG_PART_RELEASE "Desacople Parcial" #define MSG_NO_MOVE "Sin movimiento"
#define MSG_KILLED "PARADA DE EMERGENCIA. " #define MSG_KILLED "PARADA DE EMERGENCIA. "
#define MSG_STOPPED "PARADA. " #define MSG_STOPPED "PARADA."
#define MSG_STEPPER_RELEASED "Desacoplada." #define MSG_CONTROL_RETRACT "Retraer mm"
#define MSG_CONTROL_RETRACT " Retraer mm:" #define MSG_CONTROL_RETRACTF "Retraer F"
#define MSG_CONTROL_RETRACTF " Retraer F:" #define MSG_CONTROL_RETRACT_ZLIFT "Levantar mm"
#define MSG_CONTROL_RETRACT_ZLIFT " Levantar mm:" #define MSG_CONTROL_RETRACT_RECOVER "DesRet +mm"
#define MSG_CONTROL_RETRACT_RECOVER " DesRet +mm:" #define MSG_CONTROL_RETRACT_RECOVERF "DesRet F"
#define MSG_CONTROL_RETRACT_RECOVERF " DesRet F:" #define MSG_AUTORETRACT "AutoRetr."
#define MSG_AUTORETRACT " AutoRetr.:" #define MSG_FILAMENTCHANGE "Change filament"
#define MSG_FILAMENTCHANGE "Change filament" #define MSG_INIT_SDCARD "Iniciando. Tarjeta-SD"
// Serial Console Messages #define MSG_CNG_SDCARD "Cambiar Tarjeta-SD"
#define MSG_RECTRACT_WIDE "Retraer"
#define MSG_Enqueing "En cola \"" #define MSG_TEMPERATURE_WIDE "Temperatura"
#define MSG_POWERUP "PowerUp" #define MSG_TEMPERATURE_RTN "Temperatura"
#define MSG_EXTERNAL_RESET " Reset Externo" #define MSG_MAIN_WIDE "Menu Principal"
#define MSG_BROWNOUT_RESET " Reset por Voltaje Incorrecto" #define MSG_MOTION_WIDE "Movimiento"
#define MSG_WATCHDOG_RESET " Reset por Bloqueo" #define MSG_PREPARE_ALT "Preparar"
#define MSG_SOFTWARE_RESET " Reset por Software" #define MSG_CONTROL_ARROW "Control"
#define MSG_MARLIN "Marlin " #define MSG_RETRACT_ARROW "Retraer"
#define MSG_AUTHOR " | Autor: " #define MSG_PART_RELEASE "Desacople Parcial"
#define MSG_CONFIGURATION_VER " Ultima actualizacion: " #define MSG_STEPPER_RELEASED "Desacoplada."
#define MSG_FREE_MEMORY " Memoria libre: "
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " // Serial Console Messages
#define MSG_OK "ok"
#define MSG_FILE_SAVED "Guardado." #define MSG_Enqueing "En cola \""
#define MSG_ERR_LINE_NO "El Numero de Linea no es igual al Ultimo Numero de Linea+1, Ultima Linea:" #define MSG_POWERUP "PowerUp"
#define MSG_ERR_CHECKSUM_MISMATCH "el checksum no coincide, Ultima Linea:" #define MSG_EXTERNAL_RESET " Reset Externo"
#define MSG_ERR_NO_CHECKSUM "No se pudo hallar el Checksum con el numero de linea, Ultima Linea:" #define MSG_BROWNOUT_RESET " Reset por Voltaje Incorrecto"
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No se hallo el Numero de Linea con el Checksum, Ultima Linea:" #define MSG_WATCHDOG_RESET " Reset por Bloqueo"
#define MSG_FILE_PRINTED "Impresion terminada" #define MSG_SOFTWARE_RESET " Reset por Software"
#define MSG_BEGIN_FILE_LIST "Comienzo de la lista de archivos" #define MSG_MARLIN "Marlin "
#define MSG_END_FILE_LIST "Fin de la lista de archivos" #define MSG_AUTHOR " | Autor: "
#define MSG_M104_INVALID_EXTRUDER "M104 Extrusor Invalido " #define MSG_CONFIGURATION_VER " Ultima actualizacion: "
#define MSG_M105_INVALID_EXTRUDER "M105 Extrusor Invalido " #define MSG_FREE_MEMORY " Memoria libre: "
#define MSG_M218_INVALID_EXTRUDER "M218 Extrusor Invalido " #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
#define MSG_ERR_NO_THERMISTORS "No hay termistores - no temp" #define MSG_OK "ok"
#define MSG_M109_INVALID_EXTRUDER "M109 Extrusor Invalido " #define MSG_FILE_SAVED "Guardado."
#define MSG_HEATING "Calentando..." #define MSG_ERR_LINE_NO "El Numero de Linea no es igual al Ultimo Numero de Linea+1, Ultima Linea:"
#define MSG_HEATING_COMPLETE "Calentamiento Hecho." #define MSG_ERR_CHECKSUM_MISMATCH "el checksum no coincide, Ultima Linea:"
#define MSG_BED_HEATING "Calentando la base." #define MSG_ERR_NO_CHECKSUM "No se pudo hallar el Checksum con el numero de linea, Ultima Linea:"
#define MSG_BED_DONE "Base Caliente." #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No se hallo el Numero de Linea con el Checksum, Ultima Linea:"
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" #define MSG_FILE_PRINTED "Impresion terminada"
#define MSG_COUNT_X " Cuenta X:" #define MSG_BEGIN_FILE_LIST "Comienzo de la lista de archivos"
#define MSG_ERR_KILLED "¡¡Impresora Parada con kill()!!" #define MSG_END_FILE_LIST "Fin de la lista de archivos"
#define MSG_ERR_STOPPED "¡Impresora parada por errores. Arregle el error y use M999 Para reiniciar!. (La temperatura se reestablece. Ajustela antes de continuar)" #define MSG_M104_INVALID_EXTRUDER "M104 Extrusor Invalido "
#define MSG_RESEND "Reenviar:" #define MSG_M105_INVALID_EXTRUDER "M105 Extrusor Invalido "
#define MSG_UNKNOWN_COMMAND "Comando Desconocido:\"" #define MSG_M218_INVALID_EXTRUDER "M218 Extrusor Invalido "
#define MSG_ACTIVE_EXTRUDER "Extrusor Activo: " #define MSG_ERR_NO_THERMISTORS "No hay termistores - no temp"
#define MSG_INVALID_EXTRUDER "Extrusor Invalido" #define MSG_M109_INVALID_EXTRUDER "M109 Extrusor Invalido "
#define MSG_X_MIN "x_min: " #define MSG_HEATING "Calentando..."
#define MSG_X_MAX "x_max: " #define MSG_HEATING_COMPLETE "Calentamiento Hecho."
#define MSG_Y_MIN "y_min: " #define MSG_BED_HEATING "Calentando la base."
#define MSG_Y_MAX "y_max: " #define MSG_BED_DONE "Base Caliente."
#define MSG_Z_MIN "z_min: " #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
#define MSG_M119_REPORT "Comprobando fines de carrera." #define MSG_COUNT_X " Cuenta X:"
#define MSG_ENDSTOP_HIT "PULSADO" #define MSG_ERR_KILLED "¡¡Impresora Parada con kill()!!"
#define MSG_ENDSTOP_OPEN "abierto" #define MSG_ERR_STOPPED "¡Impresora parada por errores. Arregle el error y use M999 Para reiniciar!. (La temperatura se reestablece. Ajustela antes de continuar)"
#define MSG_HOTEND_OFFSET "Hotend offsets:" #define MSG_RESEND "Reenviar:"
#define MSG_UNKNOWN_COMMAND "Comando Desconocido:\""
#define MSG_SD_CANT_OPEN_SUBDIR "No se pudo abrir la subcarpeta." #define MSG_ACTIVE_EXTRUDER "Extrusor Activo: "
#define MSG_SD_INIT_FAIL "Fallo al iniciar la SD" #define MSG_INVALID_EXTRUDER "Extrusor Invalido"
#define MSG_SD_VOL_INIT_FAIL "Fallo al montar el volumen" #define MSG_X_MIN "x_min: "
#define MSG_SD_OPENROOT_FAIL "Fallo al abrir la carpeta raiz" #define MSG_X_MAX "x_max: "
#define MSG_SD_CARD_OK "Tarjeta SD OK" #define MSG_Y_MIN "y_min: "
#define MSG_SD_WORKDIR_FAIL "Fallo al abrir la carpeta de trabajo" #define MSG_Y_MAX "y_max: "
#define MSG_SD_OPEN_FILE_FAIL "Error al abrir, Archivo: " #define MSG_Z_MIN "z_min: "
#define MSG_SD_FILE_OPENED "Archivo abierto:" #define MSG_Z_MAX "z_max: "
#define MSG_SD_SIZE " Tamaño:" #define MSG_M119_REPORT "Comprobando fines de carrera."
#define MSG_SD_FILE_SELECTED "Archivo Seleccionado" #define MSG_ENDSTOP_HIT "PULSADO"
#define MSG_SD_WRITE_TO_FILE "Escribiendo en el archivo: " #define MSG_ENDSTOP_OPEN "abierto"
#define MSG_SD_PRINTING_BYTE "SD imprimiendo el byte " #define MSG_HOTEND_OFFSET "Hotend offsets:"
#define MSG_SD_NOT_PRINTING "No se esta imprimiendo con SD" #define MSG_SD_CANT_OPEN_SUBDIR "No se pudo abrir la subcarpeta."
#define MSG_SD_ERR_WRITE_TO_FILE "Error al escribir en el archivo" #define MSG_SD_INIT_FAIL "Fallo al iniciar la SD"
#define MSG_SD_CANT_ENTER_SUBDIR "No se puede abrir la carpeta:" #define MSG_SD_VOL_INIT_FAIL "Fallo al montar el volumen"
#define MSG_SD_OPENROOT_FAIL "Fallo al abrir la carpeta raiz"
#define MSG_STEPPER_TO_HIGH "Steprate demasiado alto : " #define MSG_SD_CARD_OK "Tarjeta SD OK"
#define MSG_ENDSTOPS_HIT "Se ha tocado el fin de carril: " #define MSG_SD_WORKDIR_FAIL "Fallo al abrir la carpeta de trabajo"
#define MSG_ERR_COLD_EXTRUDE_STOP " extrusion fria evitada" #define MSG_SD_OPEN_FILE_FAIL "Error al abrir, Archivo: "
#define MSG_ERR_LONG_EXTRUDE_STOP " extrusion demasiado larga evitada" #define MSG_SD_FILE_OPENED "Archivo abierto:"
#define MSG_SD_SIZE " Tamaño:"
#endif #define MSG_SD_FILE_SELECTED "Archivo Seleccionado"
#define MSG_SD_WRITE_TO_FILE "Escribiendo en el archivo: "
#if LANGUAGE_CHOICE == 6 #define MSG_SD_PRINTING_BYTE "SD imprimiendo el byte "
#define MSG_SD_NOT_PRINTING "No se esta imprimiendo con SD"
// LCD Menu Messages #define MSG_SD_ERR_WRITE_TO_FILE "Error al escribir en el archivo"
#define WELCOME_MSG MACHINE_NAME " Готов" #define MSG_SD_CANT_ENTER_SUBDIR "No se puede abrir la carpeta:"
#define MSG_SD_INSERTED "Карта вставлена"
#define MSG_SD_REMOVED "Карта извлечена" #define MSG_STEPPER_TOO_HIGH "Steprate demasiado alto : "
#define MSG_MAIN " Меню \003" #define MSG_ENDSTOPS_HIT "Se ha tocado el fin de carril: "
#define MSG_AUTOSTART " Автостарт " #define MSG_ERR_COLD_EXTRUDE_STOP " extrusion fria evitada"
#define MSG_DISABLE_STEPPERS " Выключить двигатели" #define MSG_ERR_LONG_EXTRUDE_STOP " extrusion demasiado larga evitada"
#define MSG_AUTO_HOME " Парковка "
#define MSG_SET_ORIGIN " Запомнить ноль " #endif
#define MSG_PREHEAT_PLA " Преднагрев PLA "
#define MSG_PREHEAT_PLA_SETTINGS " Настр. преднагр.PLA" #if LANGUAGE_CHOICE == 6
#define MSG_PREHEAT_ABS " Преднагрев ABS "
#define MSG_PREHEAT_ABS_SETTINGS " Настр. преднагр.ABS" // LCD Menu Messages
#define MSG_COOLDOWN " Охлаждение " #define WELCOME_MSG MACHINE_NAME " Готов"
#define MSG_EXTRUDE " Экструзия " #define MSG_SD_INSERTED "Карта вставлена"
#define MSG_RETRACT " Откат" #define MSG_SD_REMOVED "Карта извлечена"
#define MSG_MOVE_AXIS " Движение по осям \x7E" #define MSG_MAIN " Меню \003"
#define MSG_SPEED " Скорость:" #define MSG_AUTOSTART " Автостарт "
#define MSG_NOZZLE " \002 Фильера:" #define MSG_DISABLE_STEPPERS " Выключить двигатели"
#define MSG_NOZZLE1 " \002 Фильера2:" #define MSG_AUTO_HOME " Парковка "
#define MSG_NOZZLE2 " \002 Фильера3:" #define MSG_SET_ORIGIN " Запомнить ноль "
#define MSG_BED " \002 Кровать:" #define MSG_PREHEAT_PLA " Преднагрев PLA "
#define MSG_FAN_SPEED " Куллер:" #define MSG_PREHEAT_PLA_SETTINGS " Настр. преднагр.PLA"
#define MSG_FLOW " Поток:" #define MSG_PREHEAT_ABS " Преднагрев ABS "
#define MSG_CONTROL " Настройки \003" #define MSG_PREHEAT_ABS_SETTINGS " Настр. преднагр.ABS"
#define MSG_MIN " \002 Минимум:" #define MSG_COOLDOWN " Охлаждение "
#define MSG_MAX " \002 Максимум:" #define MSG_SWITCH_PS_ON "Switch Power On"
#define MSG_FACTOR " \002 Фактор:" #define MSG_SWITCH_PS_OFF "Switch Power Off"
#define MSG_AUTOTEMP " Autotemp:" #define MSG_EXTRUDE " Экструзия "
#define MSG_ON "Вкл. " #define MSG_RETRACT " Откат"
#define MSG_OFF "Выкл. " #define MSG_MOVE_AXIS " Движение по осям \x7E"
#define MSG_PID_P " PID-P: " #define MSG_SPEED " Скорость:"
#define MSG_PID_I " PID-I: " #define MSG_NOZZLE " \002 Фильера:"
#define MSG_PID_D " PID-D: " #define MSG_NOZZLE1 " \002 Фильера2:"
#define MSG_PID_C " PID-C: " #define MSG_NOZZLE2 " \002 Фильера3:"
#define MSG_ACC " Acc:" #define MSG_BED " \002 Кровать:"
#define MSG_VXY_JERK " Vxy-jerk: " #define MSG_FAN_SPEED " Куллер:"
#define MSG_VZ_JERK "Vz-jerk" #define MSG_FLOW " Поток:"
#define MSG_VE_JERK "Ve-jerk" #define MSG_CONTROL " Настройки \003"
#define MSG_VMAX " Vmax " #define MSG_MIN " \002 Минимум:"
#define MSG_X "x:" #define MSG_MAX " \002 Максимум:"
#define MSG_Y "y:" #define MSG_FACTOR " \002 Фактор:"
#define MSG_Z "z:" #define MSG_AUTOTEMP " Autotemp:"
#define MSG_E "e:" #define MSG_ON "Вкл. "
#define MSG_VMIN " Vmin:" #define MSG_OFF "Выкл. "
#define MSG_VTRAV_MIN " VTrav min:" #define MSG_PID_P " PID-P: "
#define MSG_AMAX " Amax " #define MSG_PID_I " PID-I: "
#define MSG_A_RETRACT " A-retract:" #define MSG_PID_D " PID-D: "
#define MSG_XSTEPS " X шаг/mm:" #define MSG_PID_C " PID-C: "
#define MSG_YSTEPS " Y шаг/mm:" #define MSG_ACC " Acc:"
#define MSG_ZSTEPS " Z шаг/mm:" #define MSG_VXY_JERK " Vxy-jerk: "
#define MSG_ESTEPS " E шаг/mm:" #define MSG_VZ_JERK "Vz-jerk"
#define MSG_RECTRACT " Откат подачи \x7E" #define MSG_VE_JERK "Ve-jerk"
#define MSG_TEMPERATURE " Температура \x7E" #define MSG_VMAX " Vmax "
#define MSG_MOTION " Скорости \x7E" #define MSG_X "x:"
#define MSG_STORE_EPROM " Сохранить настройки" #define MSG_Y "y:"
#define MSG_LOAD_EPROM " Загрузить настройки" #define MSG_Z "z:"
#define MSG_RESTORE_FAILSAFE " Сброс настроек " #define MSG_E "e:"
#define MSG_REFRESH "\004Обновить " #define MSG_VMIN " Vmin:"
#define MSG_WATCH " Обзор \003" #define MSG_VTRAV_MIN " VTrav min:"
#define MSG_PREPARE " Действия \x7E" #define MSG_AMAX " Amax "
#define MSG_TUNE " Настройки \x7E" #define MSG_A_RETRACT " A-retract:"
#define MSG_PAUSE_PRINT " Пауза печати \x7E" #define MSG_XSTEPS " X шаг/mm:"
#define MSG_RESUME_PRINT " Продолжить печать \x7E" #define MSG_YSTEPS " Y шаг/mm:"
#define MSG_STOP_PRINT " Остановить печать \x7E" #define MSG_ZSTEPS " Z шаг/mm:"
#define MSG_CARD_MENU " Меню карты \x7E" #define MSG_ESTEPS " E шаг/mm:"
#define MSG_NO_CARD " Нет карты" #define MSG_RECTRACT " Откат подачи \x7E"
#define MSG_DWELL "Сон..." #define MSG_TEMPERATURE " Температура \x7E"
#define MSG_USERWAIT "Нажмите для продолж." #define MSG_MOTION " Скорости \x7E"
#define MSG_NO_MOVE "Нет движения. " #define MSG_CONTRAST "LCD contrast"
#define MSG_PART_RELEASE " Извлечение принта " #define MSG_STORE_EPROM " Сохранить настройки"
#define MSG_KILLED "УБИТО. " #define MSG_LOAD_EPROM " Загрузить настройки"
#define MSG_STOPPED "ОСТАНОВЛЕНО. " #define MSG_RESTORE_FAILSAFE " Сброс настроек "
#define MSG_CONTROL_RETRACT " Откат mm:" #define MSG_REFRESH "\004Обновить "
#define MSG_CONTROL_RETRACTF " Откат F:" #define MSG_WATCH " Обзор \003"
#define MSG_CONTROL_RETRACT_ZLIFT " Прыжок mm:" #define MSG_PREPARE " Действия \x7E"
#define MSG_CONTROL_RETRACT_RECOVER " Возврат +mm:" #define MSG_TUNE " Настройки \x7E"
#define MSG_CONTROL_RETRACT_RECOVERF " Возврат F:" #define MSG_PAUSE_PRINT " Пауза печати \x7E"
#define MSG_AUTORETRACT " АвтоОткат:" #define MSG_RESUME_PRINT " Продолжить печать \x7E"
#define MSG_FILAMENTCHANGE "Change filament" #define MSG_STOP_PRINT " Остановить печать \x7E"
#define MSG_CARD_MENU " Меню карты \x7E"
// Serial Console Messages #define MSG_NO_CARD " Нет карты"
#define MSG_DWELL "Сон..."
#define MSG_Enqueing "Запланировано \"" #define MSG_USERWAIT "Нажмите для продолж."
#define MSG_POWERUP "Включение питания" #define MSG_RESUMING "Resuming print"
#define MSG_EXTERNAL_RESET " Внешний сброс" #define MSG_NO_MOVE "Нет движения. "
#define MSG_BROWNOUT_RESET " Brown out сброс" #define MSG_PART_RELEASE " Извлечение принта "
#define MSG_WATCHDOG_RESET " Watchdog сброс" #define MSG_KILLED "УБИТО. "
#define MSG_SOFTWARE_RESET " программный сброс" #define MSG_STOPPED "ОСТАНОВЛЕНО. "
#define MSG_MARLIN "Marlin " #define MSG_CONTROL_RETRACT " Откат mm:"
#define MSG_AUTHOR " | Автор: " #define MSG_CONTROL_RETRACTF " Откат F:"
#define MSG_CONFIGURATION_VER " Последнее обновление: " #define MSG_CONTROL_RETRACT_ZLIFT " Прыжок mm:"
#define MSG_FREE_MEMORY " Памяти свободно: " #define MSG_CONTROL_RETRACT_RECOVER " Возврат +mm:"
#define MSG_PLANNER_BUFFER_BYTES " Буффер очереди команд Bytes: " #define MSG_CONTROL_RETRACT_RECOVERF " Возврат F:"
#define MSG_OK "ok" #define MSG_AUTORETRACT " АвтоОткат:"
#define MSG_FILE_SAVED "Файл записан." #define MSG_FILAMENTCHANGE "Change filament"
#define MSG_ERR_LINE_NO "Номен строки это не последняя строка+1, последняя строка:" #define MSG_INIT_SDCARD "Init. SD-Card"
#define MSG_ERR_CHECKSUM_MISMATCH "контрольная сумма не совпадает, последняя строка:" #define MSG_CNG_SDCARD "Change SD-Card"
#define MSG_ERR_NO_CHECKSUM "нет контрольной суммы для строки, последняя строка:"
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "нет строки для контрольной суммы, последняя строка:" // Serial Console Messages
#define MSG_FILE_PRINTED "Печать файла завершена"
#define MSG_BEGIN_FILE_LIST "Список файлов" #define MSG_Enqueing "Запланировано \""
#define MSG_END_FILE_LIST "Конец списка файлов" #define MSG_POWERUP "Включение питания"
#define MSG_M104_INVALID_EXTRUDER "M104 ошибка экструдера " #define MSG_EXTERNAL_RESET " Внешний сброс"
#define MSG_M105_INVALID_EXTRUDER "M105 ошибка экструдера " #define MSG_BROWNOUT_RESET " Brown out сброс"
#define MSG_M218_INVALID_EXTRUDER "M218 ошибка экструдера " #define MSG_WATCHDOG_RESET " Watchdog сброс"
#define MSG_ERR_NO_THERMISTORS "Нет термистра - нет температуры" #define MSG_SOFTWARE_RESET " программный сброс"
#define MSG_M109_INVALID_EXTRUDER "M109 ошибка экструдера " #define MSG_MARLIN "Marlin "
#define MSG_HEATING "Нагрев... " #define MSG_AUTHOR " | Автор: "
#define MSG_HEATING_COMPLETE "Наргето. " #define MSG_CONFIGURATION_VER " Последнее обновление: "
#define MSG_BED_HEATING "Нагрев стола... " #define MSG_FREE_MEMORY " Памяти свободно: "
#define MSG_BED_DONE "Стол нагрет. " #define MSG_PLANNER_BUFFER_BYTES " Буффер очереди команд Bytes: "
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" #define MSG_OK "ok"
#define MSG_COUNT_X " Count X:" #define MSG_FILE_SAVED "Файл записан."
#define MSG_ERR_KILLED "Принтер остановлен. вызов kill() !!" #define MSG_ERR_LINE_NO "Номен строки это не последняя строка+1, последняя строка:"
#define MSG_ERR_STOPPED "Ошибка принтера, останов. Устраните неисправность и используйте M999 для перезагрузки!. (Температура недоступна. Проверьте датчики)" #define MSG_ERR_CHECKSUM_MISMATCH "контрольная сумма не совпадает, последняя строка:"
#define MSG_RESEND "Переотправка:" #define MSG_ERR_NO_CHECKSUM "нет контрольной суммы для строки, последняя строка:"
#define MSG_UNKNOWN_COMMAND "Неизвестная команда:\"" #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "нет строки для контрольной суммы, последняя строка:"
#define MSG_ACTIVE_EXTRUDER "Активный экструдер: " #define MSG_FILE_PRINTED "Печать файла завершена"
#define MSG_INVALID_EXTRUDER "Ошибка экструдера" #define MSG_BEGIN_FILE_LIST "Список файлов"
#define MSG_X_MIN "x_min:" #define MSG_END_FILE_LIST "Конец списка файлов"
#define MSG_X_MAX "x_max:" #define MSG_M104_INVALID_EXTRUDER "M104 ошибка экструдера "
#define MSG_Y_MIN "y_min:" #define MSG_M105_INVALID_EXTRUDER "M105 ошибка экструдера "
#define MSG_Y_MAX "y_max:" #define MSG_M218_INVALID_EXTRUDER "M218 ошибка экструдера "
#define MSG_Z_MIN "z_min:" #define MSG_ERR_NO_THERMISTORS "Нет термистра - нет температуры"
#define MSG_Z_MAX "z_max:" #define MSG_M109_INVALID_EXTRUDER "M109 ошибка экструдера "
#define MSG_M119_REPORT "Статус концевиков" #define MSG_HEATING "Нагрев... "
#define MSG_ENDSTOP_HIT "Срабатывание концевика" #define MSG_HEATING_COMPLETE "Наргето. "
#define MSG_ENDSTOP_OPEN "Концевик освобожден" #define MSG_BED_HEATING "Нагрев стола... "
#define MSG_HOTEND_OFFSET "Hotend offsets:" #define MSG_BED_DONE "Стол нагрет. "
#define MSG_SD_CANT_OPEN_SUBDIR "Не открыть папку" #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
#define MSG_SD_INIT_FAIL "Ошибка инициализации SD" #define MSG_COUNT_X " Count X:"
#define MSG_SD_VOL_INIT_FAIL "Ошибка инициализации раздела" #define MSG_ERR_KILLED "Принтер остановлен. вызов kill() !!"
#define MSG_SD_OPENROOT_FAIL "Не прочесть содержимое корня" #define MSG_ERR_STOPPED "Ошибка принтера, останов. Устраните неисправность и используйте M999 для перезагрузки!. (Температура недоступна. Проверьте датчики)"
#define MSG_SD_CARD_OK "SD карта в порядке" #define MSG_RESEND "Переотправка:"
#define MSG_SD_WORKDIR_FAIL "не открыть рабочую папку" #define MSG_UNKNOWN_COMMAND "Неизвестная команда:\""
#define MSG_SD_OPEN_FILE_FAIL "Ошибка чтения, файл: " #define MSG_ACTIVE_EXTRUDER "Активный экструдер: "
#define MSG_SD_FILE_OPENED "Файл открыт:" #define MSG_INVALID_EXTRUDER "Ошибка экструдера"
#define MSG_SD_SIZE " Размер:" #define MSG_X_MIN "x_min:"
#define MSG_SD_FILE_SELECTED "Файл выбран" #define MSG_X_MAX "x_max:"
#define MSG_SD_WRITE_TO_FILE "Запись в файл: " #define MSG_Y_MIN "y_min:"
#define MSG_SD_PRINTING_BYTE "SD печать byte " #define MSG_Y_MAX "y_max:"
#define MSG_SD_NOT_PRINTING "нет SD печати" #define MSG_Z_MIN "z_min:"
#define MSG_SD_ERR_WRITE_TO_FILE "ошибка записи в файл" #define MSG_Z_MAX "z_max:"
#define MSG_SD_CANT_ENTER_SUBDIR "Не зайти в папку:" #define MSG_M119_REPORT "Статус концевиков"
#define MSG_STEPPER_TO_HIGH "Частота шагов очень высока : " #define MSG_ENDSTOP_HIT "Срабатывание концевика"
#define MSG_ENDSTOPS_HIT "концевик сработал: " #define MSG_ENDSTOP_OPEN "Концевик освобожден"
#define MSG_ERR_COLD_EXTRUDE_STOP " защита холодной экструзии" #define MSG_HOTEND_OFFSET "Hotend offsets:"
#define MSG_ERR_LONG_EXTRUDE_STOP " защита превышения длинны экструзии" #define MSG_SD_CANT_OPEN_SUBDIR "Не открыть папку"
#define MSG_SD_INIT_FAIL "Ошибка инициализации SD"
#endif #define MSG_SD_VOL_INIT_FAIL "Ошибка инициализации раздела"
#define MSG_SD_OPENROOT_FAIL "Не прочесть содержимое корня"
#define MSG_SD_CARD_OK "SD карта в порядке"
#if LANGUAGE_CHOICE == 7 #define MSG_SD_WORKDIR_FAIL "не открыть рабочую папку"
#define MSG_SD_OPEN_FILE_FAIL "Ошибка чтения, файл: "
// LCD Menu Messages #define MSG_SD_FILE_OPENED "Файл открыт:"
#define WELCOME_MSG MACHINE_NAME " Pronto." #define MSG_SD_SIZE " Размер:"
#define MSG_SD_INSERTED "SD Card inserita" #define MSG_SD_FILE_SELECTED "Файл выбран"
#define MSG_SD_REMOVED "SD Card rimossa" #define MSG_SD_WRITE_TO_FILE "Запись в файл: "
#define MSG_MAIN "Menu principale" #define MSG_SD_PRINTING_BYTE "SD печать byte "
#define MSG_AUTOSTART "Autostart" #define MSG_SD_NOT_PRINTING "нет SD печати"
#define MSG_DISABLE_STEPPERS "Disabilita Motori" #define MSG_SD_ERR_WRITE_TO_FILE "ошибка записи в файл"
#define MSG_AUTO_HOME "Auto Home" #define MSG_SD_CANT_ENTER_SUBDIR "Не зайти в папку:"
#define MSG_SET_ORIGIN "Imposta Origine" #define MSG_STEPPER_TOO_HIGH "Частота шагов очень высока : "
#define MSG_PREHEAT_PLA "Preriscalda PLA" #define MSG_ENDSTOPS_HIT "концевик сработал: "
#define MSG_PREHEAT_PLA_SETTINGS "Preris. PLA Conf" #define MSG_ERR_COLD_EXTRUDE_STOP " защита холодной экструзии"
#define MSG_PREHEAT_ABS "Preriscalda ABS" #define MSG_ERR_LONG_EXTRUDE_STOP " защита превышения длинны экструзии"
#define MSG_PREHEAT_ABS_SETTINGS "Preris. ABS Conf"
#define MSG_COOLDOWN "Rafredda" #endif
#define MSG_EXTRUDE "Estrudi"
#define MSG_RETRACT "Ritrai"
#define MSG_MOVE_AXIS "Muovi Asse" #if LANGUAGE_CHOICE == 7
#define MSG_SPEED "Velcità"
#define MSG_NOZZLE "Ugello" // LCD Menu Messages
#define MSG_NOZZLE1 "Ugello2" #define WELCOME_MSG MACHINE_NAME " Pronta"
#define MSG_NOZZLE2 "Ugello3" #define MSG_SD_INSERTED "SD Card inserita"
#define MSG_BED "Piatto" #define MSG_SD_REMOVED "SD Card rimossa"
#define MSG_FAN_SPEED "Ventola" #define MSG_MAIN "Menu principale"
#define MSG_FLOW "Flusso" #define MSG_AUTOSTART "Autostart"
#define MSG_CONTROL "Controllo" #define MSG_DISABLE_STEPPERS "Disabilita Motori"
#define MSG_MIN " \002 Min:" #define MSG_AUTO_HOME "Auto Home"
#define MSG_MAX " \002 Max:" #define MSG_SET_ORIGIN "Imposta Origine"
#define MSG_FACTOR " \002 Fact:" #define MSG_PREHEAT_PLA "Preriscalda PLA"
#define MSG_AUTOTEMP "Autotemp" #define MSG_PREHEAT_PLA_SETTINGS "Preris. PLA Conf"
#define MSG_ON "On " #define MSG_PREHEAT_ABS "Preriscalda ABS"
#define MSG_OFF "Off" #define MSG_PREHEAT_ABS_SETTINGS "Preris. ABS Conf"
#define MSG_PID_P "PID-P" #define MSG_COOLDOWN "Raffredda"
#define MSG_PID_I "PID-I" #define MSG_SWITCH_PS_ON "Switch Power On"
#define MSG_PID_D "PID-D" #define MSG_SWITCH_PS_OFF "Switch Power Off"
#define MSG_PID_C "PID-C" #define MSG_EXTRUDE "Estrudi"
#define MSG_ACC "Accel" #define MSG_RETRACT "Ritrai"
#define MSG_VXY_JERK "Vxy-jerk" #define MSG_MOVE_AXIS "Muovi Asse"
#define MSG_SPEED "Velcità"
#define MSG_NOZZLE "Ugello"
#define MSG_NOZZLE1 "Ugello2"
#define MSG_NOZZLE2 "Ugello3"
#define MSG_BED "Piatto"
#define MSG_FAN_SPEED "Ventola"
#define MSG_FLOW "Flusso"
#define MSG_CONTROL "Controllo"
#define MSG_MIN " \002 Min:"
#define MSG_MAX " \002 Max:"
#define MSG_FACTOR " \002 Fact:"
#define MSG_AUTOTEMP "Autotemp"
#define MSG_ON "On "
#define MSG_OFF "Off"
#define MSG_PID_P "PID-P"
#define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
#define MSG_ACC "Accel"
#define MSG_VXY_JERK "Vxy-jerk"
#define MSG_VZ_JERK "Vz-jerk" #define MSG_VZ_JERK "Vz-jerk"
#define MSG_VE_JERK "Ve-jerk" #define MSG_VE_JERK "Ve-jerk"
#define MSG_VMAX "Vmax" #define MSG_VMAX "Vmax"
#define MSG_X "x" #define MSG_X "x"
#define MSG_Y "y" #define MSG_Y "y"
#define MSG_Z "z" #define MSG_Z "z"
#define MSG_E "e" #define MSG_E "e"
#define MSG_VMIN "Vmin" #define MSG_VMIN "Vmin"
#define MSG_VTRAV_MIN "VTrav min" #define MSG_VTRAV_MIN "VTrav min"
#define MSG_AMAX "Amax" #define MSG_AMAX "Amax"
#define MSG_A_RETRACT "A-retract" #define MSG_A_RETRACT "A-retract"
#define MSG_XSTEPS "Xpassi/mm" #define MSG_XSTEPS "Xpassi/mm"
#define MSG_YSTEPS "Ypassi/mm" #define MSG_YSTEPS "Ypassi/mm"
#define MSG_ZSTEPS "Zpassi/mm" #define MSG_ZSTEPS "Zpassi/mm"
#define MSG_ESTEPS "Epassi/mm" #define MSG_ESTEPS "Epassi/mm"
#define MSG_RECTRACT "Ritrai" #define MSG_RECTRACT "Ritrai"
#define MSG_TEMPERATURE "Temperatura" #define MSG_TEMPERATURE "Temperatura"
#define MSG_MOTION "Movimento" #define MSG_MOTION "Movimento"
#define MSG_STORE_EPROM "Salva in EEPROM" #define MSG_CONTRAST "LCD contrast"
#define MSG_LOAD_EPROM "Carica da EEPROM" #define MSG_STORE_EPROM "Salva in EEPROM"
#define MSG_RESTORE_FAILSAFE "Impostaz. default" #define MSG_LOAD_EPROM "Carica da EEPROM"
#define MSG_REFRESH "Aggiorna" #define MSG_RESTORE_FAILSAFE "Impostaz. default"
#define MSG_WATCH "Guarda" #define MSG_REFRESH "Aggiorna"
#define MSG_PREPARE "Prepara" #define MSG_WATCH "Guarda"
#define MSG_TUNE "Adatta" #define MSG_PREPARE "Prepara"
#define MSG_PAUSE_PRINT "Pausa" #define MSG_TUNE "Adatta"
#define MSG_RESUME_PRINT "Riprendi Stampa" #define MSG_PAUSE_PRINT "Pausa"
#define MSG_STOP_PRINT "Arresta Stampa" #define MSG_RESUME_PRINT "Riprendi Stampa"
#define MSG_CARD_MENU "SD Card Menu" #define MSG_STOP_PRINT "Arresta Stampa"
#define MSG_NO_CARD "No SD Card" #define MSG_CARD_MENU "SD Card Menu"
#define MSG_DWELL "Sospensione..." #define MSG_NO_CARD "No SD Card"
#define MSG_USERWAIT "Attendi Utente..." #define MSG_DWELL "Sospensione..."
#define MSG_RESUMING "Riprendi Stampa" #define MSG_USERWAIT "Attendi Utente..."
#define MSG_NO_MOVE "Nessun Movimento." #define MSG_RESUMING "Riprendi Stampa"
#define MSG_KILLED "UCCISO. " #define MSG_NO_MOVE "Nessun Movimento."
#define MSG_STOPPED "ARRESTATO. " #define MSG_KILLED "UCCISO. "
#define MSG_CONTROL_RETRACT "Ritrai mm" #define MSG_STOPPED "ARRESTATO. "
#define MSG_CONTROL_RETRACTF "Ritrai F" #define MSG_CONTROL_RETRACT "Ritrai mm"
#define MSG_CONTROL_RETRACT_ZLIFT "Salta mm" #define MSG_CONTROL_RETRACTF "Ritrai F"
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm" #define MSG_CONTROL_RETRACT_ZLIFT "Salta mm"
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet F" #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
#define MSG_AUTORETRACT "AutoArretramento" #define MSG_CONTROL_RETRACT_RECOVERF "UnRet F"
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Qualcosa non va in MenuStructure." #define MSG_AUTORETRACT "AutoArretramento"
#define MSG_FILAMENTCHANGE "Cambia filamento" #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Qualcosa non va in MenuStructure."
#define MSG_INIT_SDCARD "Iniz. SD-Card" #define MSG_FILAMENTCHANGE "Cambia filamento"
#define MSG_CNG_SDCARD "Cambia SD-Card" #define MSG_INIT_SDCARD "Iniz. SD-Card"
#define MSG_CNG_SDCARD "Cambia SD-Card"
// Serial Console Messages
// Serial Console Messages
#define MSG_Enqueing "accodamento \""
#define MSG_POWERUP "Accensione" #define MSG_Enqueing "accodamento \""
#define MSG_EXTERNAL_RESET " Reset Esterno" #define MSG_POWERUP "Accensione"
#define MSG_BROWNOUT_RESET " Brown out Reset" #define MSG_EXTERNAL_RESET " Reset Esterno"
#define MSG_WATCHDOG_RESET " Watchdog Reset" #define MSG_BROWNOUT_RESET " Brown out Reset"
#define MSG_SOFTWARE_RESET " Software Reset" #define MSG_WATCHDOG_RESET " Watchdog Reset"
#define MSG_MARLIN "Marlin " #define MSG_SOFTWARE_RESET " Software Reset"
#define MSG_AUTHOR " | Autore: " #define MSG_MARLIN "Marlin "
#define MSG_CONFIGURATION_VER " Ultimo Aggiornamento: " #define MSG_AUTHOR " | Autore: "
#define MSG_FREE_MEMORY " Memoria Libera: " #define MSG_CONFIGURATION_VER " Ultimo Aggiornamento: "
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " #define MSG_FREE_MEMORY " Memoria Libera: "
#define MSG_OK "ok" #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
#define MSG_FILE_SAVED "File Salvato." #define MSG_OK "ok"
#define MSG_ERR_LINE_NO "Il Numero della Linea non corrisponde al Numero dell'Ultima Linea+1, Ultima Linea: " #define MSG_FILE_SAVED "File Salvato."
#define MSG_ERR_CHECKSUM_MISMATCH "checksum non corrispondente, Ultima Linea: " #define MSG_ERR_LINE_NO "Il Numero della Linea non corrisponde al Numero dell'Ultima Linea+1, Ultima Linea: "
#define MSG_ERR_NO_CHECKSUM "Nessun Checksum con Numero di Linea, Ultima Linea: " #define MSG_ERR_CHECKSUM_MISMATCH "checksum non corrispondente, Ultima Linea: "
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Nessun Numero di Linea con Checksum, Ultima Linea: " #define MSG_ERR_NO_CHECKSUM "Nessun Checksum con Numero di Linea, Ultima Linea: "
#define MSG_FILE_PRINTED "File stampato" #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Nessun Numero di Linea con Checksum, Ultima Linea: "
#define MSG_BEGIN_FILE_LIST "Inizio Lista File" #define MSG_FILE_PRINTED "File stampato"
#define MSG_END_FILE_LIST "Fine Lista File" #define MSG_BEGIN_FILE_LIST "Inizio Lista File"
#define MSG_M104_INVALID_EXTRUDER "M104 Estrusore non valido " #define MSG_END_FILE_LIST "Fine Lista File"
#define MSG_M105_INVALID_EXTRUDER "M105 Estrusore non valido " #define MSG_M104_INVALID_EXTRUDER "M104 Estrusore non valido "
#define MSG_M218_INVALID_EXTRUDER "M218 Estrusore non valido " #define MSG_M105_INVALID_EXTRUDER "M105 Estrusore non valido "
#define MSG_ERR_NO_THERMISTORS "Nessun Termistore - nessuna temperatura" #define MSG_M218_INVALID_EXTRUDER "M218 Estrusore non valido "
#define MSG_M109_INVALID_EXTRUDER "M109 Estrusore non valido " #define MSG_ERR_NO_THERMISTORS "Nessun Termistore - nessuna temperatura"
#define MSG_HEATING "Riscaldamento..." #define MSG_M109_INVALID_EXTRUDER "M109 Estrusore non valido "
#define MSG_HEATING_COMPLETE "Stampante Calda." #define MSG_HEATING "Riscaldamento..."
#define MSG_BED_HEATING "Riscaldamento Piatto." #define MSG_HEATING_COMPLETE "Stampante Calda."
#define MSG_BED_DONE "Piatto Pronto." #define MSG_BED_HEATING "Riscaldamento Piatto."
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" #define MSG_BED_DONE "Piatto Pronto."
#define MSG_COUNT_X " Calcola X: " #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
#define MSG_ERR_KILLED "Stampante Calda. kill() chiamata !!" #define MSG_COUNT_X " Calcola X: "
#define MSG_ERR_STOPPED "Stampante fermata a causa di errori. Risolvi l'errore e usa M999 per ripartire!. (Reset temperatura. Impostala prima di ripartire)" #define MSG_ERR_KILLED "Stampante Calda. kill() chiamata !!"
#define MSG_RESEND "Reinviato:" #define MSG_ERR_STOPPED "Stampante fermata a causa di errori. Risolvi l'errore e usa M999 per ripartire!. (Reset temperatura. Impostala prima di ripartire)"
#define MSG_UNKNOWN_COMMAND "Comando sconosciuto: \"" #define MSG_RESEND "Reinviato:"
#define MSG_ACTIVE_EXTRUDER "Attiva Estrusore: " #define MSG_UNKNOWN_COMMAND "Comando sconosciuto: \""
#define MSG_INVALID_EXTRUDER "Estrusore non valido" #define MSG_ACTIVE_EXTRUDER "Attiva Estrusore: "
#define MSG_X_MIN "x_min: " #define MSG_INVALID_EXTRUDER "Estrusore non valido"
#define MSG_X_MAX "x_max: " #define MSG_X_MIN "x_min: "
#define MSG_Y_MIN "y_min: " #define MSG_X_MAX "x_max: "
#define MSG_Y_MAX "y_max: " #define MSG_Y_MIN "y_min: "
#define MSG_Z_MIN "z_min: " #define MSG_Y_MAX "y_max: "
#define MSG_Z_MAX "z_max: " #define MSG_Z_MIN "z_min: "
#define MSG_M119_REPORT "Segnalazione stato degli endstop" #define MSG_Z_MAX "z_max: "
#define MSG_ENDSTOP_HIT "INNESCATO" #define MSG_M119_REPORT "Segnalazione stato degli endstop"
#define MSG_ENDSTOP_OPEN "aperto" #define MSG_ENDSTOP_HIT "INNESCATO"
#define MSG_HOTEND_OFFSET "Hotend offsets:" #define MSG_ENDSTOP_OPEN "aperto"
#define MSG_HOTEND_OFFSET "Hotend offsets:"
#define MSG_SD_CANT_OPEN_SUBDIR "Impossibile aprire sottocartella"
#define MSG_SD_INIT_FAIL "Fallita Inizializzazione SD" #define MSG_SD_CANT_OPEN_SUBDIR "Impossibile aprire sottocartella"
#define MSG_SD_VOL_INIT_FAIL "Fallito il montaggio del Volume" #define MSG_SD_INIT_FAIL "Fallita Inizializzazione SD"
#define MSG_SD_OPENROOT_FAIL "Fallita l'apertura Cartella Principale" #define MSG_SD_VOL_INIT_FAIL "Fallito il montaggio del Volume"
#define MSG_SD_CARD_OK "SD card ok" #define MSG_SD_OPENROOT_FAIL "Fallita l'apertura Cartella Principale"
#define MSG_SD_WORKDIR_FAIL "Fallita l'apertura Cartella di Lavoro" #define MSG_SD_CARD_OK "SD card ok"
#define MSG_SD_OPEN_FILE_FAIL "Fallita l'apertura del File: " #define MSG_SD_WORKDIR_FAIL "Fallita l'apertura Cartella di Lavoro"
#define MSG_SD_FILE_OPENED "File aperto: " #define MSG_SD_OPEN_FILE_FAIL "Fallita l'apertura del File: "
#define MSG_SD_SIZE " Dimensione: " #define MSG_SD_FILE_OPENED "File aperto: "
#define MSG_SD_FILE_SELECTED "File selezionato" #define MSG_SD_SIZE " Dimensione: "
#define MSG_SD_WRITE_TO_FILE "Scrittura su file: " #define MSG_SD_FILE_SELECTED "File selezionato"
#define MSG_SD_PRINTING_BYTE "Si sta scrivendo il byte su SD " #define MSG_SD_WRITE_TO_FILE "Scrittura su file: "
#define MSG_SD_NOT_PRINTING "Non si sta scrivendo su SD" #define MSG_SD_PRINTING_BYTE "Si sta scrivendo il byte su SD "
#define MSG_SD_ERR_WRITE_TO_FILE "Errore nella scrittura su file" #define MSG_SD_NOT_PRINTING "Non si sta scrivendo su SD"
#define MSG_SD_CANT_ENTER_SUBDIR "Impossibile entrare nella sottocartella: " #define MSG_SD_ERR_WRITE_TO_FILE "Errore nella scrittura su file"
#define MSG_SD_CANT_ENTER_SUBDIR "Impossibile entrare nella sottocartella: "
#define MSG_STEPPER_TO_HIGH "Steprate troppo alto: "
#define MSG_ENDSTOPS_HIT "Raggiunto il fondo carrello: " #define MSG_STEPPER_TOO_HIGH "Steprate troppo alto: "
#define MSG_ERR_COLD_EXTRUDE_STOP " prevenuta estrusione fredda" #define MSG_ENDSTOPS_HIT "Raggiunto il fondo carrello: "
#define MSG_ERR_LONG_EXTRUDE_STOP " prevenuta estrusione troppo lunga" #define MSG_ERR_COLD_EXTRUDE_STOP " prevenuta estrusione fredda"
#define MSG_ERR_LONG_EXTRUDE_STOP " prevenuta estrusione troppo lunga"
#endif
#endif
#if LANGUAGE_CHOICE == 8
#if LANGUAGE_CHOICE == 8
// LCD Menu Messages
#define WELCOME_MSG MACHINE_NAME " Pronta." // LCD Menu Messages
#define MSG_SD_INSERTED "Cartao SD inserido" #define WELCOME_MSG MACHINE_NAME " Pronta."
#define MSG_SD_REMOVED "Cartao SD removido" #define MSG_SD_INSERTED "Cartao SD inserido"
#define MSG_MAIN " Menu Principal \003" #define MSG_SD_REMOVED "Cartao SD removido"
#define MSG_AUTOSTART " Autostart" #define MSG_MAIN " Menu Principal \003"
#define MSG_DISABLE_STEPPERS " Apagar Motores" #define MSG_AUTOSTART " Autostart"
#define MSG_AUTO_HOME " Ir para Origen" #define MSG_DISABLE_STEPPERS " Apagar Motores"
#define MSG_SET_ORIGIN " Estabelecer Origen" #define MSG_AUTO_HOME " Ir para Origen"
#define MSG_PREHEAT_PLA " pre-aquecer PLA" #define MSG_SET_ORIGIN " Estabelecer Origen"
#define MSG_PREHEAT_PLA_SETTINGS " pre-aquecer PLA Setting" #define MSG_PREHEAT_PLA " pre-aquecer PLA"
#define MSG_PREHEAT_ABS " pre-aquecer ABS" #define MSG_PREHEAT_PLA_SETTINGS " pre-aquecer PLA Setting"
#define MSG_PREHEAT_ABS_SETTINGS " pre-aquecer ABS Setting" #define MSG_PREHEAT_ABS " pre-aquecer ABS"
#define MSG_COOLDOWN " Esfriar" #define MSG_PREHEAT_ABS_SETTINGS " pre-aquecer ABS Setting"
#define MSG_EXTRUDE " Extrudar" #define MSG_COOLDOWN " Esfriar"
#define MSG_RETRACT " Retrair" #define MSG_SWITCH_PS_ON "Switch Power On"
#define MSG_PREHEAT_PLA " pre-aquecer PLA" #define MSG_SWITCH_PS_OFF "Switch Power Off"
#define MSG_PREHEAT_ABS " pre-aquecer ABS" #define MSG_EXTRUDE " Extrudar"
#define MSG_MOVE_AXIS " Mover eixo \x7E" #define MSG_RETRACT " Retrair"
#define MSG_SPEED " Velocidade:" #define MSG_PREHEAT_PLA " pre-aquecer PLA"
#define MSG_NOZZLE " \002Nozzle:" #define MSG_PREHEAT_ABS " pre-aquecer ABS"
#define MSG_NOZZLE1 " \002Nozzle2:" #define MSG_MOVE_AXIS " Mover eixo \x7E"
#define MSG_NOZZLE2 " \002Nozzle3:" #define MSG_SPEED " Velocidade:"
#define MSG_BED " \002Base:" #define MSG_NOZZLE " \002Nozzle:"
#define MSG_FAN_SPEED " Velocidade Ventoinha:" #define MSG_NOZZLE1 " \002Nozzle2:"
#define MSG_FLOW " Fluxo:" #define MSG_NOZZLE2 " \002Nozzle3:"
#define MSG_CONTROL " Controle \003" #define MSG_BED " \002Base:"
#define MSG_MIN " \002 Min:" #define MSG_FAN_SPEED " Velocidade Ventoinha:"
#define MSG_MAX " \002 Max:" #define MSG_FLOW " Fluxo:"
#define MSG_FACTOR " \002 Fact:" #define MSG_CONTROL " Controle \003"
#define MSG_AUTOTEMP " Autotemp:" #define MSG_MIN " \002 Min:"
#define MSG_ON "On " #define MSG_MAX " \002 Max:"
#define MSG_OFF "Off" #define MSG_FACTOR " \002 Fact:"
#define MSG_PID_P " PID-P: " #define MSG_AUTOTEMP " Autotemp:"
#define MSG_PID_I " PID-I: " #define MSG_ON "On "
#define MSG_PID_D " PID-D: " #define MSG_OFF "Off"
#define MSG_PID_C " PID-C: " #define MSG_PID_P " PID-P: "
#define MSG_ACC " Acc:" #define MSG_PID_I " PID-I: "
#define MSG_VXY_JERK " Vxy-jerk: " #define MSG_PID_D " PID-D: "
#define MSG_PID_C " PID-C: "
#define MSG_ACC " Acc:"
#define MSG_VXY_JERK " Vxy-jerk: "
#define MSG_VZ_JERK "Vz-jerk" #define MSG_VZ_JERK "Vz-jerk"
#define MSG_VE_JERK "Ve-jerk" #define MSG_VE_JERK "Ve-jerk"
#define MSG_VMAX " Vmax " #define MSG_VMAX " Vmax "
#define MSG_X "x:" #define MSG_X "x:"
#define MSG_Y "y:" #define MSG_Y "y:"
#define MSG_Z "z:" #define MSG_Z "z:"
#define MSG_E "e:" #define MSG_E "e:"
#define MSG_VMIN " Vmin:" #define MSG_VMIN " Vmin:"
#define MSG_VTRAV_MIN " VTrav min:" #define MSG_VTRAV_MIN " VTrav min:"
#define MSG_AMAX " Amax " #define MSG_AMAX " Amax "
#define MSG_A_RETRACT " A-retract:" #define MSG_A_RETRACT " A-retract:"
#define MSG_XSTEPS " Xpasso/mm:" #define MSG_XSTEPS " Xpasso/mm:"
#define MSG_YSTEPS " Ypasso/mm:" #define MSG_YSTEPS " Ypasso/mm:"
#define MSG_ZSTEPS " Zpasso/mm:" #define MSG_ZSTEPS " Zpasso/mm:"
#define MSG_ESTEPS " Epasso/mm:" #define MSG_ESTEPS " Epasso/mm:"
#define MSG_MAIN_WIDE " Menu Principal \003" #define MSG_MAIN_WIDE " Menu Principal \003"
#define MSG_RECTRACT_WIDE " Retrair \x7E" #define MSG_RECTRACT "Retrair"
#define MSG_TEMPERATURE_WIDE " Temperatura \x7E" #define MSG_TEMPERATURE "Temperatura"
#define MSG_TEMPERATURE_RTN " Temperatura \003" #define MSG_MOTION "Movimento"
#define MSG_MOTION_WIDE " Movimento \x7E" #define MSG_STORE_EPROM " Guardar memoria"
#define MSG_STORE_EPROM " Guardar memoria" #define MSG_LOAD_EPROM " Carregar memoria"
#define MSG_LOAD_EPROM " Carregar memoria" #define MSG_RESTORE_FAILSAFE " Rest. de emergencia"
#define MSG_RESTORE_FAILSAFE " Rest. de emergencia" #define MSG_REFRESH "\004Recarregar"
#define MSG_REFRESH "\004Recarregar" #define MSG_WATCH " Monitorar \003"
#define MSG_WATCH " Monitorar \003" #define MSG_PREPARE " Preparar \x7E"
#define MSG_PREPARE " Preparar \x7E" #define MSG_PREPARE_ALT " Preparar \003"
#define MSG_PREPARE_ALT " Preparar \003" #define MSG_CONTROL_ARROW " Controle \x7E"
#define MSG_CONTROL_ARROW " Controle \x7E" #define MSG_RETRACT_ARROW " Retrair \x7E"
#define MSG_RETRACT_ARROW " Retrair \x7E" #define MSG_TUNE " Tune \x7E"
#define MSG_TUNE " Tune \x7E" #define MSG_PAUSE_PRINT " Pausar Impressao \x7E"
#define MSG_PAUSE_PRINT " Pausar Impressao \x7E" #define MSG_RESUME_PRINT " Resumir Impressao \x7E"
#define MSG_RESUME_PRINT " Resumir Impressao \x7E" #define MSG_STOP_PRINT " Parar Impressao \x7E"
#define MSG_STOP_PRINT " Parar Impressao \x7E" #define MSG_CARD_MENU " Menu cartao SD \x7E"
#define MSG_CARD_MENU " Menu cartao SD \x7E" #define MSG_NO_CARD " Sem cartao SD"
#define MSG_NO_CARD " Sem cartao SD" #define MSG_DWELL "Repouso..."
#define MSG_DWELL "Repouso..." #define MSG_USERWAIT "Esperando Ordem..."
#define MSG_USERWAIT "Esperando Ordem..." #define MSG_RESUMING "Resuming print"
#define MSG_NO_MOVE "Sem movimento." #define MSG_NO_MOVE "Sem movimento."
#define MSG_PART_RELEASE "Lancamento Parcial" #define MSG_PART_RELEASE "Lancamento Parcial"
#define MSG_KILLED "PARADA DE EMERGENCIA. " #define MSG_KILLED "PARADA DE EMERGENCIA. "
#define MSG_STOPPED "PARADA. " #define MSG_STOPPED "PARADA. "
#define MSG_STEPPER_RELEASED "Lancado." #define MSG_STEPPER_RELEASED "Lancado."
#define MSG_CONTROL_RETRACT " Retrair mm:" #define MSG_CONTROL_RETRACT " Retrair mm:"
#define MSG_CONTROL_RETRACTF " Retrair F:" #define MSG_CONTROL_RETRACTF " Retrair F:"
#define MSG_CONTROL_RETRACT_ZLIFT " Levantar mm:" #define MSG_CONTROL_RETRACT_ZLIFT " Levantar mm:"
#define MSG_CONTROL_RETRACT_RECOVER " DesRet +mm:" #define MSG_CONTROL_RETRACT_RECOVER " DesRet +mm:"
#define MSG_CONTROL_RETRACT_RECOVERF " DesRet F:" #define MSG_CONTROL_RETRACT_RECOVERF " DesRet F:"
#define MSG_AUTORETRACT " AutoRetr.:" #define MSG_AUTORETRACT " AutoRetr.:"
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Algo esta errado na estrutura do Menu." #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Algo esta errado na estrutura do Menu."
#define MSG_FILAMENTCHANGE "Change filament" #define MSG_FILAMENTCHANGE "Change filament"
#define MSG_INIT_SDCARD "Init. SD-Card"
// Serial Console Messages #define MSG_CNG_SDCARD "Change SD-Card"
#define MSG_Enqueing "enqueing \"" // Serial Console Messages
#define MSG_POWERUP "PowerUp"
#define MSG_EXTERNAL_RESET " Reset Externo" #define MSG_Enqueing "enqueing \""
#define MSG_BROWNOUT_RESET " Reset por voltagem incorreta" #define MSG_POWERUP "PowerUp"
#define MSG_WATCHDOG_RESET " Reset por Bloqueio" #define MSG_EXTERNAL_RESET " Reset Externo"
#define MSG_SOFTWARE_RESET " Reset por Software" #define MSG_BROWNOUT_RESET " Reset por voltagem incorreta"
#define MSG_MARLIN "Marlin " #define MSG_WATCHDOG_RESET " Reset por Bloqueio"
#define MSG_AUTHOR " | Author: " #define MSG_SOFTWARE_RESET " Reset por Software"
#define MSG_CONFIGURATION_VER " Ultima atualizacao: " #define MSG_MARLIN "Marlin "
#define MSG_FREE_MEMORY " memoria Livre: " #define MSG_AUTHOR " | Author: "
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " #define MSG_CONFIGURATION_VER " Ultima atualizacao: "
#define MSG_OK "ok" #define MSG_FREE_MEMORY " memoria Livre: "
#define MSG_FILE_SAVED "Guardado." #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
#define MSG_ERR_LINE_NO "O Numero da linha Nao e igual ao ultimo Numero da linha+1, Ultima linha:" #define MSG_OK "ok"
#define MSG_ERR_CHECKSUM_MISMATCH "O checksum Nao coincide, Ultima linha:" #define MSG_FILE_SAVED "Guardado."
#define MSG_ERR_NO_CHECKSUM "Nao foi possivel encontrar o checksum com o numero da linha, Ultima linha :" #define MSG_ERR_LINE_NO "O Numero da linha Nao e igual ao ultimo Numero da linha+1, Ultima linha:"
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Nao ha o numero da linha com o checksum, Ultima linha:" #define MSG_ERR_CHECKSUM_MISMATCH "O checksum Nao coincide, Ultima linha:"
#define MSG_FILE_PRINTED "Impressao terminada" #define MSG_ERR_NO_CHECKSUM "Nao foi possivel encontrar o checksum com o numero da linha, Ultima linha :"
#define MSG_BEGIN_FILE_LIST "Começo da lista de arquivos" #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Nao ha o numero da linha com o checksum, Ultima linha:"
#define MSG_END_FILE_LIST "Fim da lista de arquivos" #define MSG_FILE_PRINTED "Impressao terminada"
#define MSG_M104_INVALID_EXTRUDER "M104 Extrusor inválido " #define MSG_BEGIN_FILE_LIST "Começo da lista de arquivos"
#define MSG_M105_INVALID_EXTRUDER "M105 Extrusor inválido " #define MSG_END_FILE_LIST "Fim da lista de arquivos"
#define MSG_M218_INVALID_EXTRUDER "M218 Extrusor inválido " #define MSG_M104_INVALID_EXTRUDER "M104 Extrusor inválido "
#define MSG_ERR_NO_THERMISTORS "Nao ha termistor - no temp" #define MSG_M105_INVALID_EXTRUDER "M105 Extrusor inválido "
#define MSG_M109_INVALID_EXTRUDER "M109 Extrusor inválido " #define MSG_M218_INVALID_EXTRUDER "M218 Extrusor inválido "
#define MSG_HEATING "Aquecendo..." #define MSG_ERR_NO_THERMISTORS "Nao ha termistor - no temp"
#define MSG_HEATING_COMPLETE "Aquecido." #define MSG_M109_INVALID_EXTRUDER "M109 Extrusor inválido "
#define MSG_BED_HEATING "Aquecendo a Base." #define MSG_HEATING "Aquecendo..."
#define MSG_BED_DONE "Base quente." #define MSG_HEATING_COMPLETE "Aquecido."
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" #define MSG_BED_HEATING "Aquecendo a Base."
#define MSG_COUNT_X " Conta X:" #define MSG_BED_DONE "Base quente."
#define MSG_ERR_KILLED "Impressora parada com kill() !!" #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
#define MSG_ERR_STOPPED "Impressora parada por erros. Coserte o erro e use M999 para recomeçar!. (Temperatura reiniciada. Ajuste antes de recomeçar)" #define MSG_COUNT_X " Conta X:"
#define MSG_RESEND "Reenviar:" #define MSG_ERR_KILLED "Impressora parada com kill() !!"
#define MSG_UNKNOWN_COMMAND "Comando desconhecido:\"" #define MSG_ERR_STOPPED "Impressora parada por erros. Coserte o erro e use M999 para recomeçar!. (Temperatura reiniciada. Ajuste antes de recomeçar)"
#define MSG_ACTIVE_EXTRUDER "Extrusor ativo: " #define MSG_RESEND "Reenviar:"
#define MSG_INVALID_EXTRUDER "Extrusor invalido" #define MSG_UNKNOWN_COMMAND "Comando desconhecido:\""
#define MSG_X_MIN "x_min: " #define MSG_ACTIVE_EXTRUDER "Extrusor ativo: "
#define MSG_X_MAX "x_max: " #define MSG_INVALID_EXTRUDER "Extrusor invalido"
#define MSG_Y_MIN "y_min: " #define MSG_X_MIN "x_min: "
#define MSG_Y_MAX "y_max: " #define MSG_X_MAX "x_max: "
#define MSG_Z_MIN "z_min: " #define MSG_Y_MIN "y_min: "
#define MSG_Z_MAX "z_max: " #define MSG_Y_MAX "y_max: "
#define MSG_M119_REPORT "Relatando estado do ponto final" #define MSG_Z_MIN "z_min: "
#define MSG_ENDSTOP_HIT "PULSADO" #define MSG_Z_MAX "z_max: "
#define MSG_ENDSTOP_OPEN "Aberto" #define MSG_M119_REPORT "Relatando estado do ponto final"
#define MSG_HOTEND_OFFSET "Hotend offsets:" #define MSG_ENDSTOP_HIT "PULSADO"
#define MSG_ENDSTOP_OPEN "Aberto"
#define MSG_SD_CANT_OPEN_SUBDIR "Nao pode abrir sub diretorio" #define MSG_HOTEND_OFFSET "Hotend offsets:"
#define MSG_SD_INIT_FAIL "Falha ao iniciar SD"
#define MSG_SD_VOL_INIT_FAIL "Falha ao montar volume" #define MSG_SD_CANT_OPEN_SUBDIR "Nao pode abrir sub diretorio"
#define MSG_SD_OPENROOT_FAIL "Falha ao abrir diretorio raiz" #define MSG_SD_INIT_FAIL "Falha ao iniciar SD"
#define MSG_SD_CARD_OK "cartao SD ok" #define MSG_SD_VOL_INIT_FAIL "Falha ao montar volume"
#define MSG_SD_WORKDIR_FAIL "Falha ao abrir diretorio de trabalho" #define MSG_SD_OPENROOT_FAIL "Falha ao abrir diretorio raiz"
#define MSG_SD_OPEN_FILE_FAIL "Erro ao abrir, Arquivo: " #define MSG_SD_CARD_OK "cartao SD ok"
#define MSG_SD_FILE_OPENED "Arquivo aberto:" #define MSG_SD_WORKDIR_FAIL "Falha ao abrir diretorio de trabalho"
#define MSG_SD_SIZE " Size:" #define MSG_SD_OPEN_FILE_FAIL "Erro ao abrir, Arquivo: "
#define MSG_SD_FILE_SELECTED "Arquivo selecionado" #define MSG_SD_FILE_OPENED "Arquivo aberto:"
#define MSG_SD_WRITE_TO_FILE "Escrevendo no arquivo: " #define MSG_SD_SIZE " Size:"
#define MSG_SD_PRINTING_BYTE "SD imprimindo o byte " #define MSG_SD_FILE_SELECTED "Arquivo selecionado"
#define MSG_SD_NOT_PRINTING "Nao esta se imprimindo com o SD" #define MSG_SD_WRITE_TO_FILE "Escrevendo no arquivo: "
#define MSG_SD_ERR_WRITE_TO_FILE "Erro ao escrever no arquivo" #define MSG_SD_PRINTING_BYTE "SD imprimindo o byte "
#define MSG_SD_CANT_ENTER_SUBDIR "Nao pode abrir o sub diretorio:" #define MSG_SD_NOT_PRINTING "Nao esta se imprimindo com o SD"
#define MSG_SD_ERR_WRITE_TO_FILE "Erro ao escrever no arquivo"
#define MSG_STEPPER_TO_HIGH "Steprate muito alto : " #define MSG_SD_CANT_ENTER_SUBDIR "Nao pode abrir o sub diretorio:"
#define MSG_ENDSTOPS_HIT "O ponto final foi tocado: "
#define MSG_ERR_COLD_EXTRUDE_STOP " Extrusao a frio evitada" #define MSG_STEPPER_TOO_HIGH "Steprate muito alto : "
#define MSG_ERR_LONG_EXTRUDE_STOP " Extrusao muito larga evitada" #define MSG_ENDSTOPS_HIT "O ponto final foi tocado: "
#define MSG_ERR_COLD_EXTRUDE_STOP " Extrusao a frio evitada"
#define MSG_ERR_LONG_EXTRUDE_STOP " Extrusao muito larga evitada"
#endif
#endif
#if LANGUAGE_CHOICE == 9
// Finnish #if LANGUAGE_CHOICE == 9
// LCD Menu Messages // Finnish
#define WELCOME_MSG MACHINE_NAME " valmis"
#define MSG_SD_INSERTED "Kortti asetettu" // LCD Menu Messages
#define MSG_SD_REMOVED "Kortti poistettu" #define WELCOME_MSG MACHINE_NAME " valmis"
#define MSG_MAIN "Palaa" #define MSG_SD_INSERTED "Kortti asetettu"
#define MSG_AUTOSTART "Automaatti" #define MSG_SD_REMOVED "Kortti poistettu"
#define MSG_DISABLE_STEPPERS "Vapauta moottorit" #define MSG_MAIN "Palaa"
#define MSG_AUTO_HOME "Aja referenssiin" #define MSG_AUTOSTART "Automaatti"
#define MSG_SET_ORIGIN "Aseta origo" #define MSG_DISABLE_STEPPERS "Vapauta moottorit"
#define MSG_PREHEAT_PLA "Esilammita PLA" #define MSG_AUTO_HOME "Aja referenssiin"
#define MSG_PREHEAT_PLA_SETTINGS "Esilammita PLA konf" #define MSG_SET_ORIGIN "Aseta origo"
#define MSG_PREHEAT_ABS "Esilammita ABS" #define MSG_PREHEAT_PLA "Esilammita PLA"
#define MSG_PREHEAT_ABS_SETTINGS "Esilammita ABS konf" #define MSG_PREHEAT_PLA_SETTINGS "Esilammita PLA konf"
#define MSG_COOLDOWN "Jaahdyta" #define MSG_PREHEAT_ABS "Esilammita ABS"
#define MSG_EXTRUDE "Pursota" #define MSG_PREHEAT_ABS_SETTINGS "Esilammita ABS konf"
#define MSG_RETRACT "Veda takaisin" #define MSG_COOLDOWN "Jaahdyta"
#define MSG_MOVE_AXIS "Liikuta akseleita" #define MSG_SWITCH_PS_ON "Switch Power On"
#define MSG_SPEED "Nopeus" #define MSG_SWITCH_PS_OFF "Switch Power Off"
#define MSG_NOZZLE "Suutin" #define MSG_EXTRUDE "Pursota"
#define MSG_NOZZLE1 "Suutin2" #define MSG_RETRACT "Veda takaisin"
#define MSG_NOZZLE2 "Suutin3" #define MSG_MOVE_AXIS "Liikuta akseleita"
#define MSG_BED "Alusta" #define MSG_SPEED "Nopeus"
#define MSG_FAN_SPEED "Tuul. nopeus" #define MSG_NOZZLE "Suutin"
#define MSG_FLOW "Virtaus" #define MSG_NOZZLE1 "Suutin2"
#define MSG_CONTROL "Kontrolli" #define MSG_NOZZLE2 "Suutin3"
#define MSG_MIN " \002 Min" #define MSG_BED "Alusta"
#define MSG_MAX " \002 Max" #define MSG_FAN_SPEED "Tuul. nopeus"
#define MSG_FACTOR " \002 Kerr" #define MSG_FLOW "Virtaus"
#define MSG_AUTOTEMP "Autotemp" #define MSG_CONTROL "Kontrolli"
#define MSG_ON "On " #define MSG_MIN " \002 Min"
#define MSG_OFF "Off" #define MSG_MAX " \002 Max"
#define MSG_PID_P "PID-P" #define MSG_FACTOR " \002 Kerr"
#define MSG_PID_I "PID-I" #define MSG_AUTOTEMP "Autotemp"
#define MSG_PID_D "PID-D" #define MSG_ON "On "
#define MSG_PID_C "PID-C" #define MSG_OFF "Off"
#define MSG_ACC "Kiihtyv" #define MSG_PID_P "PID-P"
#define MSG_VXY_JERK "Vxy-jerk" #define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
#define MSG_ACC "Kiihtyv"
#define MSG_VXY_JERK "Vxy-jerk"
#define MSG_VZ_JERK "Vz-jerk" #define MSG_VZ_JERK "Vz-jerk"
#define MSG_VE_JERK "Ve-jerk" #define MSG_VE_JERK "Ve-jerk"
#define MSG_VMAX "Vmax " #define MSG_VMAX "Vmax "
#define MSG_X "x" #define MSG_X "x"
#define MSG_Y "y" #define MSG_Y "y"
#define MSG_Z "z" #define MSG_Z "z"
#define MSG_E "e" #define MSG_E "e"
#define MSG_VMIN "Vmin" #define MSG_VMIN "Vmin"
#define MSG_VTRAV_MIN "VLiike min" #define MSG_VTRAV_MIN "VLiike min"
#define MSG_AMAX "Amax " #define MSG_AMAX "Amax "
#define MSG_A_RETRACT "A-peruuta" #define MSG_A_RETRACT "A-peruuta"
#define MSG_XSTEPS "Xsteps/mm" #define MSG_XSTEPS "Xsteps/mm"
#define MSG_YSTEPS "Ysteps/mm" #define MSG_YSTEPS "Ysteps/mm"
#define MSG_ZSTEPS "Zsteps/mm" #define MSG_ZSTEPS "Zsteps/mm"
#define MSG_ESTEPS "Esteps/mm" #define MSG_ESTEPS "Esteps/mm"
#define MSG_RECTRACT "Veda takaisin" #define MSG_RECTRACT "Veda takaisin"
#define MSG_TEMPERATURE "Lampotila" #define MSG_TEMPERATURE "Lampotila"
#define MSG_MOTION "Liike" #define MSG_MOTION "Liike"
#define MSG_STORE_EPROM "Tallenna muistiin" #define MSG_CONTRAST "LCD contrast"
#define MSG_LOAD_EPROM "Lataa muistista" #define MSG_STORE_EPROM "Tallenna muistiin"
#define MSG_RESTORE_FAILSAFE "Palauta oletus" #define MSG_LOAD_EPROM "Lataa muistista"
#define MSG_REFRESH "Paivita" #define MSG_RESTORE_FAILSAFE "Palauta oletus"
#define MSG_WATCH "Seuraa" #define MSG_REFRESH "Paivita"
#define MSG_PREPARE "Valmistele" #define MSG_WATCH "Seuraa"
#define MSG_TUNE "Saada" #define MSG_PREPARE "Valmistele"
#define MSG_PAUSE_PRINT "Keskeyta tulostus" #define MSG_TUNE "Saada"
#define MSG_RESUME_PRINT "Jatka tulostusta" #define MSG_PAUSE_PRINT "Keskeyta tulostus"
#define MSG_STOP_PRINT "Pysayta tulostus" #define MSG_RESUME_PRINT "Jatka tulostusta"
#define MSG_CARD_MENU "Korttivalikko" #define MSG_STOP_PRINT "Pysayta tulostus"
#define MSG_NO_CARD "Ei korttia" #define MSG_CARD_MENU "Korttivalikko"
#define MSG_DWELL "Nukkumassa..." #define MSG_NO_CARD "Ei korttia"
#define MSG_USERWAIT "Odotetaan valintaa..." #define MSG_DWELL "Nukkumassa..."
#define MSG_RESUMING "Jatketaan tulostusta" #define MSG_USERWAIT "Odotetaan valintaa..."
#define MSG_NO_MOVE "Ei liiketta." #define MSG_RESUMING "Jatketaan tulostusta"
#define MSG_KILLED "KILLED. " #define MSG_NO_MOVE "Ei liiketta."
#define MSG_STOPPED "STOPPED. " #define MSG_KILLED "KILLED. "
#define MSG_CONTROL_RETRACT "Veda mm" #define MSG_STOPPED "STOPPED. "
#define MSG_CONTROL_RETRACTF "Veda F" #define MSG_CONTROL_RETRACT "Veda mm"
#define MSG_CONTROL_RETRACT_ZLIFT "Z mm" #define MSG_CONTROL_RETRACTF "Veda F"
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm" #define MSG_CONTROL_RETRACT_ZLIFT "Z mm"
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet F" #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
#define MSG_AUTORETRACT "AutoVeto." #define MSG_CONTROL_RETRACT_RECOVERF "UnRet F"
#define MSG_FILAMENTCHANGE "Change filament" #define MSG_AUTORETRACT "AutoVeto."
#define MSG_FILAMENTCHANGE "Change filament"
// Serial Console Messages #define MSG_INIT_SDCARD "Init. SD-Card"
#define MSG_CNG_SDCARD "Change SD-Card"
#define MSG_Enqueing "jonoon \""
#define MSG_POWERUP "Kaynnistys" // Serial Console Messages
#define MSG_EXTERNAL_RESET " Ulkoinen Reset"
#define MSG_BROWNOUT_RESET " Alajannite Reset" #define MSG_Enqueing "jonoon \""
#define MSG_WATCHDOG_RESET " Vahtikoira Reset" #define MSG_POWERUP "Kaynnistys"
#define MSG_SOFTWARE_RESET " Ohjelmisto Reset" #define MSG_EXTERNAL_RESET " Ulkoinen Reset"
#define MSG_MARLIN "Marlin " #define MSG_BROWNOUT_RESET " Alajannite Reset"
#define MSG_AUTHOR " | Author: " #define MSG_WATCHDOG_RESET " Vahtikoira Reset"
#define MSG_CONFIGURATION_VER " Paivitetty viimeksi: " #define MSG_SOFTWARE_RESET " Ohjelmisto Reset"
#define MSG_FREE_MEMORY " Vapaata muistia: " #define MSG_MARLIN "Marlin "
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " #define MSG_AUTHOR " | Author: "
#define MSG_OK "ok" #define MSG_CONFIGURATION_VER " Paivitetty viimeksi: "
#define MSG_FILE_SAVED "Tiedosto tallennettu." #define MSG_FREE_MEMORY " Vapaata muistia: "
#define MSG_ERR_LINE_NO "Rivinumero ei ole Viimeisin rivi+1, Viimeisin rivi: " #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
#define MSG_ERR_CHECKSUM_MISMATCH "Tarkistesummassa virhe, Viimeisin rivi: " #define MSG_OK "ok"
#define MSG_ERR_NO_CHECKSUM "Rivilla ei tarkistesummaa, Viimeisin rivi: " #define MSG_FILE_SAVED "Tiedosto tallennettu."
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Ei rivinumeroa tarkistesumman kanssa, Viimeisin rivi: " #define MSG_ERR_LINE_NO "Rivinumero ei ole Viimeisin rivi+1, Viimeisin rivi: "
#define MSG_FILE_PRINTED "Tiedoston tulostus valmis" #define MSG_ERR_CHECKSUM_MISMATCH "Tarkistesummassa virhe, Viimeisin rivi: "
#define MSG_BEGIN_FILE_LIST "Tiedostolistauksen alku" #define MSG_ERR_NO_CHECKSUM "Rivilla ei tarkistesummaa, Viimeisin rivi: "
#define MSG_END_FILE_LIST "Tiedostolistauksen loppu" #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Ei rivinumeroa tarkistesumman kanssa, Viimeisin rivi: "
#define MSG_M104_INVALID_EXTRUDER "M104 Virheellinen suutin " #define MSG_FILE_PRINTED "Tiedoston tulostus valmis"
#define MSG_M105_INVALID_EXTRUDER "M105 Virheellinen suutin " #define MSG_BEGIN_FILE_LIST "Tiedostolistauksen alku"
#define MSG_M218_INVALID_EXTRUDER "M218 Virheellinen suutin " #define MSG_END_FILE_LIST "Tiedostolistauksen loppu"
#define MSG_ERR_NO_THERMISTORS "Ei termistoreja - ei lampotiloja" #define MSG_M104_INVALID_EXTRUDER "M104 Virheellinen suutin "
#define MSG_M109_INVALID_EXTRUDER "M109 Virheellinen suutin " #define MSG_M105_INVALID_EXTRUDER "M105 Virheellinen suutin "
#define MSG_HEATING "Lammitan..." #define MSG_M218_INVALID_EXTRUDER "M218 Virheellinen suutin "
#define MSG_HEATING_COMPLETE "Lammitys valmis." #define MSG_ERR_NO_THERMISTORS "Ei termistoreja - ei lampotiloja"
#define MSG_BED_HEATING "Alusta lampiaa." #define MSG_M109_INVALID_EXTRUDER "M109 Virheellinen suutin "
#define MSG_BED_DONE "Alusta valmis." #define MSG_HEATING "Lammitan..."
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n" #define MSG_HEATING_COMPLETE "Lammitys valmis."
#define MSG_COUNT_X " Laskuri X: " #define MSG_BED_HEATING "Alusta lampiaa."
#define MSG_ERR_KILLED "Tulostin pysaytetty. kill():ia kutsuttu!" #define MSG_BED_DONE "Alusta valmis."
#define MSG_ERR_STOPPED "Tulostin pysaytetty virheiden vuoksi. Korjaa virheet ja kayta M999 kaynnistaaksesi uudelleen. (Lampotila nollattiin. Aseta lampotila sen jalkeen kun jatkat.)" #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
#define MSG_RESEND "Uudelleenlahetys: " #define MSG_COUNT_X " Laskuri X: "
#define MSG_UNKNOWN_COMMAND "Tuntematon komento: \"" #define MSG_ERR_KILLED "Tulostin pysaytetty. kill():ia kutsuttu!"
#define MSG_ACTIVE_EXTRUDER "Aktiivinen suutin: " #define MSG_ERR_STOPPED "Tulostin pysaytetty virheiden vuoksi. Korjaa virheet ja kayta M999 kaynnistaaksesi uudelleen. (Lampotila nollattiin. Aseta lampotila sen jalkeen kun jatkat.)"
#define MSG_INVALID_EXTRUDER "Virheellinen suutin" #define MSG_RESEND "Uudelleenlahetys: "
#define MSG_X_MIN "x_min: " #define MSG_UNKNOWN_COMMAND "Tuntematon komento: \""
#define MSG_X_MAX "x_max: " #define MSG_ACTIVE_EXTRUDER "Aktiivinen suutin: "
#define MSG_Y_MIN "y_min: " #define MSG_INVALID_EXTRUDER "Virheellinen suutin"
#define MSG_Y_MAX "y_max: " #define MSG_X_MIN "x_min: "
#define MSG_Z_MIN "z_min: " #define MSG_X_MAX "x_max: "
#define MSG_Z_MAX "z_max: " #define MSG_Y_MIN "y_min: "
#define MSG_M119_REPORT "Rajakytkimien tilaraportti" #define MSG_Y_MAX "y_max: "
#define MSG_ENDSTOP_HIT "AKTIIVISENA" #define MSG_Z_MIN "z_min: "
#define MSG_ENDSTOP_OPEN "avoinna" #define MSG_Z_MAX "z_max: "
#define MSG_HOTEND_OFFSET "Hotend offsets:" #define MSG_M119_REPORT "Rajakytkimien tilaraportti"
#define MSG_ENDSTOP_HIT "AKTIIVISENA"
#define MSG_SD_CANT_OPEN_SUBDIR "Alihakemistoa ei voitu avata" #define MSG_ENDSTOP_OPEN "avoinna"
#define MSG_SD_INIT_FAIL "SD alustus epaonnistui" #define MSG_HOTEND_OFFSET "Hotend offsets:"
#define MSG_SD_VOL_INIT_FAIL "volume.init epaonnistui"
#define MSG_SD_OPENROOT_FAIL "openRoot epaonnistui" #define MSG_SD_CANT_OPEN_SUBDIR "Alihakemistoa ei voitu avata"
#define MSG_SD_CARD_OK "SD kortti ok" #define MSG_SD_INIT_FAIL "SD alustus epaonnistui"
#define MSG_SD_WORKDIR_FAIL "workDir open epaonnistui" #define MSG_SD_VOL_INIT_FAIL "volume.init epaonnistui"
#define MSG_SD_OPEN_FILE_FAIL "avaus epaonnistui, Tiedosto: " #define MSG_SD_OPENROOT_FAIL "openRoot epaonnistui"
#define MSG_SD_FILE_OPENED "Tiedosto avattu: " #define MSG_SD_CARD_OK "SD kortti ok"
#define MSG_SD_SIZE " Koko: " #define MSG_SD_WORKDIR_FAIL "workDir open epaonnistui"
#define MSG_SD_FILE_SELECTED "Tiedosto valittu" #define MSG_SD_OPEN_FILE_FAIL "avaus epaonnistui, Tiedosto: "
#define MSG_SD_WRITE_TO_FILE "Kirjoitetaan tiedostoon: " #define MSG_SD_FILE_OPENED "Tiedosto avattu: "
#define MSG_SD_PRINTING_BYTE "SD tulostus byte " #define MSG_SD_SIZE " Koko: "
#define MSG_SD_NOT_PRINTING "Ei SD tulostus" #define MSG_SD_FILE_SELECTED "Tiedosto valittu"
#define MSG_SD_ERR_WRITE_TO_FILE "virhe kirjoitettaessa tiedostoon" #define MSG_SD_WRITE_TO_FILE "Kirjoitetaan tiedostoon: "
#define MSG_SD_CANT_ENTER_SUBDIR "Alihakemistoon ei voitu siirtya: " #define MSG_SD_PRINTING_BYTE "SD tulostus byte "
#define MSG_SD_NOT_PRINTING "Ei SD tulostus"
#define MSG_STEPPER_TO_HIGH "Askellustaajuus liian suuri: " #define MSG_SD_ERR_WRITE_TO_FILE "virhe kirjoitettaessa tiedostoon"
#define MSG_ENDSTOPS_HIT "paatyrajat aktivoitu: " #define MSG_SD_CANT_ENTER_SUBDIR "Alihakemistoon ei voitu siirtya: "
#define MSG_ERR_COLD_EXTRUDE_STOP " kylmana pursotus estetty"
#define MSG_ERR_LONG_EXTRUDE_STOP " liian pitka pursotus estetty" #define MSG_STEPPER_TOO_HIGH "Askellustaajuus liian suuri: "
#define MSG_ENDSTOPS_HIT "paatyrajat aktivoitu: "
#endif #define MSG_ERR_COLD_EXTRUDE_STOP " kylmana pursotus estetty"
#endif // ifndef LANGUAGE_H #define MSG_ERR_LONG_EXTRUDE_STOP " liian pitka pursotus estetty"
#endif
#endif // ifndef LANGUAGE_H

1042
Marlin/pins.h
View file

@ -14,7 +14,7 @@
#define DIGIPOTSS_PIN -1 #define DIGIPOTSS_PIN -1
#if MOTHERBOARD == 99 #if MOTHERBOARD == 99
#define KNOWN_BOARD 1 #define KNOWN_BOARD 1
#define X_STEP_PIN 2 #define X_STEP_PIN 2
#define X_DIR_PIN 3 #define X_DIR_PIN 3
@ -53,6 +53,7 @@
#endif /* 99 */ #endif /* 99 */
/**************************************************************************************** /****************************************************************************************
* Gen7 v1.1, v1.2, v1.3 pin assignment * Gen7 v1.1, v1.2, v1.3 pin assignment
* *
@ -227,8 +228,8 @@
#endif #endif
//x axis pins //x axis pins
#define X_STEP_PIN 21 //different from stanard GEN7 #define X_STEP_PIN 21 // different from standard GEN7
#define X_DIR_PIN 20 //different from stanard GEN7 #define X_DIR_PIN 20 // different from standard GEN7
#define X_ENABLE_PIN 24 #define X_ENABLE_PIN 24
#define X_STOP_PIN 0 #define X_STOP_PIN 0
@ -248,14 +249,14 @@
#define E0_STEP_PIN 28 #define E0_STEP_PIN 28
#define E0_DIR_PIN 27 #define E0_DIR_PIN 27
#define E0_ENABLE_PIN 24 #define E0_ENABLE_PIN 24
#define TEMP_0_PIN 2 #define TEMP_0_PIN 2
#define TEMP_1_PIN -1 #define TEMP_1_PIN -1
#define TEMP_2_PIN -1 #define TEMP_2_PIN -1
#define TEMP_BED_PIN 1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 34 bed) #define TEMP_BED_PIN 1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 34 bed)
#define HEATER_0_PIN 4 #define HEATER_0_PIN 4
#define HEATER_1_PIN -1 #define HEATER_1_PIN -1
#define HEATER_2_PIN -1 #define HEATER_2_PIN -1
#define HEATER_BED_PIN 3 // (bed) #define HEATER_BED_PIN 3 // (bed)
@ -272,40 +273,32 @@
//our RS485 pins //our RS485 pins
//#define TX_ENABLE_PIN 12 //#define TX_ENABLE_PIN 12
//#define RX_ENABLE_PIN 13 //#define RX_ENABLE_PIN 13
#define BEEPER -1 #define BEEPER -1
#define SDCARDDETECT -1 #define SDCARDDETECT -1
#define SUICIDE_PIN -1 //has to be defined; otherwise Power_off doesn't work #define SUICIDE_PIN -1 //has to be defined; otherwise Power_off doesn't work
#define KILL_PIN -1 #define KILL_PIN -1
//Pins for 4bit LCD Support //Pins for 4bit LCD Support
#define LCD_PINS_RS 18 #define LCD_PINS_RS 18
#define LCD_PINS_ENABLE 17 #define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 16 #define LCD_PINS_D4 16
#define LCD_PINS_D5 15 #define LCD_PINS_D5 15
#define LCD_PINS_D6 13 #define LCD_PINS_D6 13
#define LCD_PINS_D7 14 #define LCD_PINS_D7 14
//buttons are directly attached //buttons are directly attached
#define BTN_EN1 11 #define BTN_EN1 11
#define BTN_EN2 10 #define BTN_EN2 10
#define BTN_ENC 12 //the click #define BTN_ENC 12 //the click
#define BLEN_C 2
#define BLEN_B 1
#define BLEN_A 0
#define encrot0 0
#define encrot1 2
#define encrot2 3
#define encrot3 1
#endif #endif
/**************************************************************************************** /****************************************************************************************
* Arduino Mega pin assignment * Arduino Mega pin assignment
* *
****************************************************************************************/ ****************************************************************************************/
#if MOTHERBOARD == 3 || MOTHERBOARD == 33 || MOTHERBOARD == 34 #if MOTHERBOARD == 3 || MOTHERBOARD == 33 || MOTHERBOARD == 34 || MOTHERBOARD == 35 || MOTHERBOARD == 77
#define KNOWN_BOARD 1 #define KNOWN_BOARD 1
//////////////////FIX THIS////////////// //////////////////FIX THIS//////////////
@ -315,156 +308,244 @@
#endif #endif
#endif #endif
// uncomment one of the following lines for RAMPS v1.3 or v1.0, comment both for v1.2 or 1.1 // uncomment one of the following lines for RAMPS v1.3 or v1.0, comment both for v1.2 or 1.1
// #define RAMPS_V_1_3 // #define RAMPS_V_1_3
// #define RAMPS_V_1_0 // #define RAMPS_V_1_0
#if MOTHERBOARD == 33 || MOTHERBOARD == 34
#define LARGE_FLASH true #if MOTHERBOARD == 33 || MOTHERBOARD == 34 || MOTHERBOARD == 35 || MOTHERBOARD == 77
#define X_STEP_PIN 54 #define LARGE_FLASH true
#define X_DIR_PIN 55
#define X_ENABLE_PIN 38 #if MOTHERBOARD == 77
#define X_MIN_PIN 3 #define X_STEP_PIN 54
#define X_MAX_PIN 2 #define X_DIR_PIN 55
#define X_ENABLE_PIN 38
#define X_MIN_PIN 3
#define X_MAX_PIN -1 //2 //Max endstops default to disabled "-1", set to commented value to enable.
#define Y_STEP_PIN 60 #define Y_STEP_PIN 60
#define Y_DIR_PIN 61 #define Y_DIR_PIN 61
#define Y_ENABLE_PIN 56 #define Y_ENABLE_PIN 56
#define Y_MIN_PIN 14 #define Y_MIN_PIN 14
#define Y_MAX_PIN 15 #define Y_MAX_PIN -1 //15
#define Z_STEP_PIN 46 #define Z_STEP_PIN 46
#define Z_DIR_PIN 48 #define Z_DIR_PIN 48
#define Z_ENABLE_PIN 62 #define Z_ENABLE_PIN 63
#define Z_MIN_PIN 18 #define Z_MIN_PIN 18
#define Z_MAX_PIN 19 #define Z_MAX_PIN -1
#define Z2_STEP_PIN 36 #define Z2_STEP_PIN 36
#define Z2_DIR_PIN 34 #define Z2_DIR_PIN 34
#define Z2_ENABLE_PIN 30 #define Z2_ENABLE_PIN 30
#define E0_STEP_PIN 26 #define E0_STEP_PIN 26
#define E0_DIR_PIN 28 #define E0_DIR_PIN 28
#define E0_ENABLE_PIN 24 #define E0_ENABLE_PIN 24
#define E1_STEP_PIN 36 #define E1_STEP_PIN 36
#define E1_DIR_PIN 34 #define E1_DIR_PIN 34
#define E1_ENABLE_PIN 30 #define E1_ENABLE_PIN 30
#define SDPOWER -1 #define SDPOWER -1
#define SDSS 53 #define SDSS 25//53
#define LED_PIN 13 #define LED_PIN 13
#if MOTHERBOARD == 33 #define BEEPER 33
#define FAN_PIN 9 // (Sprinter config)
#else
#define FAN_PIN 4 // IO pin. Buffer needed
#endif
#define PS_ON_PIN 12
#if defined(REPRAP_DISCOUNT_SMART_CONTROLLER) || defined(G3D_PANEL) #else
#define KILL_PIN 41
#else
#define KILL_PIN -1
#endif
#define HEATER_0_PIN 10 // EXTRUDER 1 #define X_STEP_PIN 54
#if MOTHERBOARD == 33 #define X_DIR_PIN 55
#define HEATER_1_PIN -1 #define X_ENABLE_PIN 38
#else #define X_MIN_PIN 3
#define HEATER_1_PIN 9 // EXTRUDER 2 (FAN On Sprinter) #define X_MAX_PIN 2
#endif
#define HEATER_2_PIN -1
#define TEMP_0_PIN 13 // ANALOG NUMBERING
#define TEMP_1_PIN 15 // ANALOG NUMBERING
#define TEMP_2_PIN -1 // ANALOG NUMBERING
#define HEATER_BED_PIN 8 // BED
#define TEMP_BED_PIN 14 // ANALOG NUMBERING
#ifdef ULTRA_LCD #define Y_STEP_PIN 60
#define Y_DIR_PIN 61
#define Y_ENABLE_PIN 56
#define Y_MIN_PIN 14
#define Y_MAX_PIN 15
#ifdef NEWPANEL #define Z_STEP_PIN 46
//encoder rotation values #define Z_DIR_PIN 48
#define encrot0 0 #define Z_ENABLE_PIN 62
#define encrot1 2 #define Z_MIN_PIN 18
#define encrot2 3 #define Z_MAX_PIN 19
#define encrot3 1
#define BLEN_A 0 #define Z2_STEP_PIN 36
#define BLEN_B 1 #define Z2_DIR_PIN 34
#define BLEN_C 2 #define Z2_ENABLE_PIN 30
#define LCD_PINS_RS 16 #define E0_STEP_PIN 26
#define LCD_PINS_ENABLE 17 #define E0_DIR_PIN 28
#define LCD_PINS_D4 23 #define E0_ENABLE_PIN 24
#define LCD_PINS_D5 25
#define LCD_PINS_D6 27
#define LCD_PINS_D7 29
#ifdef REPRAP_DISCOUNT_SMART_CONTROLLER
#define BEEPER 37
#define BTN_EN1 31 #define E1_STEP_PIN 36
#define BTN_EN2 33 #define E1_DIR_PIN 34
#define BTN_ENC 35 #define E1_ENABLE_PIN 30
#define SDCARDDETECT 49 #define SDPOWER -1
#define SDSS 53
#define LED_PIN 13
#endif
#if MOTHERBOARD == 33 || MOTHERBOARD == 35
#define FAN_PIN 9 // (Sprinter config)
#else
#define FAN_PIN 4 // IO pin. Buffer needed
#endif
#if MOTHERBOARD == 77
#define FAN_PIN 8
#endif
#if MOTHERBOARD == 35
#define CONTROLLERFAN_PIN 10 //Pin used for the fan to cool controller
#endif
#define PS_ON_PIN 12
#if defined(REPRAP_DISCOUNT_SMART_CONTROLLER) || defined(G3D_PANEL)
#define KILL_PIN 41
#else
#define KILL_PIN -1
#endif
#if MOTHERBOARD == 35
#define HEATER_0_PIN 8
#else
#define HEATER_0_PIN 10 // EXTRUDER 1
#endif
#if MOTHERBOARD == 33
#define HEATER_1_PIN -1
#else
#define HEATER_1_PIN 9 // EXTRUDER 2 (FAN On Sprinter)
#endif
#define HEATER_2_PIN -1
#if MOTHERBOARD == 77
#define HEATER_0_PIN 10
#define HEATER_1_PIN 12
#define HEATER_2_PIN 6
#endif
#define TEMP_0_PIN 13 // ANALOG NUMBERING
#define TEMP_1_PIN 15 // ANALOG NUMBERING
#define TEMP_2_PIN -1 // ANALOG NUMBERING
#if MOTHERBOARD == 35
#define HEATER_BED_PIN -1 // NO BED
#else
#if MOTHERBOARD == 77
#define HEATER_BED_PIN 9 // BED
#else #else
//arduino pin which triggers an piezzo beeper #define HEATER_BED_PIN 8 // BED
#define BEEPER 33 // Beeper on AUX-4 #endif
#endif
#define TEMP_BED_PIN 14 // ANALOG NUMBERING
//buttons are directly attached using AUX-2
#define BTN_EN1 37
#define BTN_EN2 35
#define BTN_ENC 31 //the click
#ifdef G3D_PANEL
#define SDCARDDETECT 49 #ifdef NUM_SERVOS
#else #define SERVO0_PIN 11
#define SDCARDDETECT -1 // Ramps does not use this port
#endif #if NUM_SERVOS > 1
#define SERVO1_PIN 6
#endif #endif
#else //old style panel with shift register #if NUM_SERVOS > 2
//arduino pin witch triggers an piezzo beeper #define SERVO2_PIN 5
#define BEEPER 33 No Beeper added #endif
//buttons are attached to a shift register #if NUM_SERVOS > 3
#define SERVO3_PIN 4
#endif
#endif
#ifdef ULTRA_LCD
#ifdef NEWPANEL
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23
#define LCD_PINS_D5 25
#define LCD_PINS_D6 27
#define LCD_PINS_D7 29
#ifdef REPRAP_DISCOUNT_SMART_CONTROLLER
#define BEEPER 37
#define BTN_EN1 31
#define BTN_EN2 33
#define BTN_ENC 35
#define SDCARDDETECT 49
#else
//arduino pin which triggers an piezzo beeper
#define BEEPER 33 // Beeper on AUX-4
//buttons are directly attached using AUX-2
#ifdef REPRAPWORLD_KEYPAD
#define BTN_EN1 64 // encoder
#define BTN_EN2 59 // encoder
#define BTN_ENC 63 // enter button
#define SHIFT_OUT 40 // shift register
#define SHIFT_CLK 44 // shift register
#define SHIFT_LD 42 // shift register
#else
#define BTN_EN1 37
#define BTN_EN2 35
#define BTN_ENC 31 //the click
#endif
#ifdef G3D_PANEL
#define SDCARDDETECT 49
#else
#define SDCARDDETECT -1 // Ramps does not use this port
#endif
#endif
#if MOTHERBOARD == 77
#define BEEPER -1
#define LCD_PINS_RS 27
#define LCD_PINS_ENABLE 29
#define LCD_PINS_D4 37
#define LCD_PINS_D5 35
#define LCD_PINS_D6 33
#define LCD_PINS_D7 31
//buttons
#define BTN_EN1 16
#define BTN_EN2 17
#define BTN_ENC 23 //the click
#endif
#else //old style panel with shift register
//arduino pin witch triggers an piezzo beeper
#define BEEPER 33 //No Beeper added
//buttons are attached to a shift register
// Not wired this yet // Not wired this yet
//#define SHIFT_CLK 38 //#define SHIFT_CLK 38
//#define SHIFT_LD 42 //#define SHIFT_LD 42
//#define SHIFT_OUT 40 //#define SHIFT_OUT 40
//#define SHIFT_EN 17 //#define SHIFT_EN 17
#define LCD_PINS_RS 16 #define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17 #define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23 #define LCD_PINS_D4 23
#define LCD_PINS_D5 25 #define LCD_PINS_D5 25
#define LCD_PINS_D6 27 #define LCD_PINS_D6 27
#define LCD_PINS_D7 29 #define LCD_PINS_D7 29
#endif
//encoder rotation values #endif //ULTRA_LCD
#define encrot0 0
#define encrot1 2
#define encrot2 3
#define encrot3 1
//bits in the shift register that carry the buttons for:
// left up center down right red
#define BL_LE 7
#define BL_UP 6
#define BL_MI 5
#define BL_DW 4
#define BL_RI 3
#define BL_ST 2
#define BLEN_B 1
#define BLEN_A 0
#endif
#endif //ULTRA_LCD
#else // RAMPS_V_1_1 or RAMPS_V_1_2 as default (MOTHERBOARD == 3) #else // RAMPS_V_1_1 or RAMPS_V_1_2 as default (MOTHERBOARD == 3)
@ -511,7 +592,8 @@
#define TEMP_1_PIN -1 #define TEMP_1_PIN -1
#define TEMP_2_PIN -1 #define TEMP_2_PIN -1
#define TEMP_BED_PIN 1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! #define TEMP_BED_PIN 1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
#endif// MOTHERBOARD == 33 || MOTHERBOARD == 34
#endif // MOTHERBOARD == 33 || MOTHERBOARD == 34 || MOTHERBOARD == 35 || MOTHERBOARD == 77
// SPI for Max6675 Thermocouple // SPI for Max6675 Thermocouple
@ -525,7 +607,7 @@
#define MAX6675_SS 49 #define MAX6675_SS 49
#endif #endif
#endif//MOTHERBOARD == 3 || MOTHERBOARD == 33 || MOTHERBOARD == 34 #endif //MOTHERBOARD == 3 || MOTHERBOARD == 33 || MOTHERBOARD == 34 || MOTHERBOARD == 35 || MOTHERBOARD == 77
/**************************************************************************************** /****************************************************************************************
* Duemilanove w/ ATMega328P pin assignment * Duemilanove w/ ATMega328P pin assignment
@ -568,13 +650,138 @@
#define HEATER_1_PIN -1 #define HEATER_1_PIN -1
#define HEATER_2_PIN -1 #define HEATER_2_PIN -1
#define TEMP_0_PIN 0 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! #define TEMP_0_PIN 0 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
#define TEMP_1_PIN -1 #define TEMP_1_PIN -1
#define TEMP_2_PIN -1 #define TEMP_2_PIN -1
#define HEATER_BED_PIN -1 #define HEATER_BED_PIN -1
#define TEMP_BED_PIN -1 #define TEMP_BED_PIN -1
#endif #endif
/****************************************************************************************
* Elefu RA Board Pin Assignments
*
****************************************************************************************/
#if MOTHERBOARD == 21
#define KNOWN_BOARD 1
#ifndef __AVR_ATmega2560__
#error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
#endif
#define X_STEP_PIN 49
#define X_DIR_PIN 13
#define X_ENABLE_PIN 48
#define X_MIN_PIN 35
#define X_MAX_PIN -1 //34
#define Y_STEP_PIN 11
#define Y_DIR_PIN 9
#define Y_ENABLE_PIN 12
#define Y_MIN_PIN 33
#define Y_MAX_PIN -1 //32
#define Z_STEP_PIN 7
#define Z_DIR_PIN 6
#define Z_ENABLE_PIN 8
#define Z_MIN_PIN 31
#define Z_MAX_PIN -1 //30
#define E2_STEP_PIN 43
#define E2_DIR_PIN 47
#define E2_ENABLE_PIN 42
#define E1_STEP_PIN 18
#define E1_DIR_PIN 19
#define E1_ENABLE_PIN 38
#define E0_STEP_PIN 40
#define E0_DIR_PIN 41
#define E0_ENABLE_PIN 37
#define SDPOWER -1
#define LED_PIN -1 //Use +12V Aux port for LED Ring
#define FAN_PIN 16 //5V PWM
#define PS_ON_PIN 10 //Set to -1 if using a manual switch on the PWRSW Connector
#define SLEEP_WAKE_PIN 26 //This feature still needs work
#define HEATER_0_PIN 45 //12V PWM1
#define HEATER_1_PIN 46 //12V PWM2
#define HEATER_2_PIN 17 //12V PWM3
#define HEATER_BED_PIN 44 //DOUBLE 12V PWM
#define TEMP_0_PIN 3 //ANALOG NUMBERING
#define TEMP_1_PIN 2 //ANALOG NUMBERING
#define TEMP_2_PIN 1 //ANALOG NUMBERING
#define TEMP_BED_PIN 0 //ANALOG NUMBERING
#define BEEPER 36
#define KILL_PIN -1
// M240 Triggers a camera by emulating a Canon RC-1 Remote
// Data from: http://www.doc-diy.net/photo/rc-1_hacked/
#define PHOTOGRAPH_PIN 29
#ifdef RA_CONTROL_PANEL
#define SDSS 53
#define SDCARDDETECT 28
#define BTN_EN1 14
#define BTN_EN2 39
#define BTN_ENC 15 //the click
#define BLEN_C 2
#define BLEN_B 1
#define BLEN_A 0
//encoder rotation values
#define encrot0 0
#define encrot1 2
#define encrot2 3
#define encrot3 1
#endif //RA_CONTROL_PANEL
#ifdef RA_DISCO
//variables for which pins the TLC5947 is using
#define TLC_CLOCK_PIN 25
#define TLC_BLANK_PIN 23
#define TLC_XLAT_PIN 22
#define TLC_DATA_PIN 24
//We also need to define pin to port number mapping for the 2560 to match the pins listed above. If you change the TLC pins, update this as well per the 2560 datasheet!
//This currently only works with the RA Board.
#define TLC_CLOCK_BIT 3 //bit 3 on port A
#define TLC_CLOCK_PORT &PORTA //bit 3 on port A
#define TLC_BLANK_BIT 1 //bit 1 on port A
#define TLC_BLANK_PORT &PORTA //bit 1 on port A
#define TLC_DATA_BIT 2 //bit 2 on port A
#define TLC_DATA_PORT &PORTA //bit 2 on port A
#define TLC_XLAT_BIT 0 //bit 0 on port A
#define TLC_XLAT_PORT &PORTA //bit 0 on port A
//change this to match your situation. Lots of TLCs takes up the arduino SRAM very quickly, so be careful
//Leave it at at least 1 if you have enabled RA_LIGHTING
//The number of TLC5947 boards chained together for use with the animation, additional ones will repeat the animation on them, but are not individually addressable and mimic those before them. You can leave the default at 2 even if you only have 1 TLC5947 module.
#define NUM_TLCS 2
//These TRANS_ARRAY values let you change the order the LEDs on the lighting modules will animate for chase functions.
//Modify them according to your specific situation.
//NOTE: the array should be 8 long for every TLC you have. These defaults assume (2) TLCs.
#define TRANS_ARRAY {0, 1, 2, 3, 4, 5, 6, 7, 15, 14, 13, 12, 11, 10, 9, 8} //forwards
//#define TRANS_ARRAY {7, 6, 5, 4, 3, 2, 1, 0, 8, 9, 10, 11, 12, 13, 14, 15} //backwards
#endif //RA_LIGHTING
#endif /* Ra Board */
/**************************************************************************************** /****************************************************************************************
* Gen6 pin assignment * Gen6 pin assignment
* *
@ -632,14 +839,14 @@
#define PS_ON_PIN -1 //changed @ rkoeppl 20110410 #define PS_ON_PIN -1 //changed @ rkoeppl 20110410
#define KILL_PIN -1 //changed @ drakelive 20120830 #define KILL_PIN -1 //changed @ drakelive 20120830
//our pin for debugging. //our pin for debugging.
#define DEBUG_PIN 0
//our RS485 pins
#define TX_ENABLE_PIN 12
#define RX_ENABLE_PIN 13
#define DEBUG_PIN 0
//our RS485 pins
#define TX_ENABLE_PIN 12
#define RX_ENABLE_PIN 13
#endif #endif
/**************************************************************************************** /****************************************************************************************
@ -649,13 +856,16 @@
#if MOTHERBOARD == 64 #if MOTHERBOARD == 64
#define STB #define STB
#endif #endif
#if MOTHERBOARD == 63 #if MOTHERBOARD == 63 || MOTHERBOARD == 66
#define MELZI #define MELZI
#endif #endif
#if MOTHERBOARD == 62 || MOTHERBOARD == 63 || MOTHERBOARD == 64 #if MOTHERBOARD == 65
#define AZTEEG_X1
#endif
#if MOTHERBOARD == 62 || MOTHERBOARD == 63 || MOTHERBOARD == 64 || MOTHERBOARD == 65 || MOTHERBOARD == 66
#undef MOTHERBOARD #undef MOTHERBOARD
#define MOTHERBOARD 6 #define MOTHERBOARD 6
#define SANGUINOLOLU_V_1_2 #define SANGUINOLOLU_V_1_2
#endif #endif
#if MOTHERBOARD == 6 #if MOTHERBOARD == 6
#define KNOWN_BOARD 1 #define KNOWN_BOARD 1
@ -682,7 +892,7 @@
#define LED_PIN -1 #define LED_PIN -1
#define FAN_PIN -1 #define FAN_PIN -1
#if FAN_PIN == 12 || FAN_PIN ==13 #if FAN_PIN == 12 || FAN_PIN ==13
#define FAN_SOFT_PWM #define FAN_SOFT_PWM
#endif #endif
@ -693,6 +903,12 @@
#endif #endif
#ifdef STB #ifdef STB
#define FAN_PIN 4
// Uncomment this if you have the first generation (V1.10) of STBs board
#define LCD_PIN_BL 17 // LCD backlight LED
#endif
#ifdef AZTEEG_X1
#define FAN_PIN 4 #define FAN_PIN 4
#endif #endif
@ -736,46 +952,65 @@
//we have no buzzer installed //we have no buzzer installed
#define BEEPER -1 #define BEEPER -1
//LCD Pins //LCD Pins
#ifdef DOGLCD #ifdef DOGLCD
// Pins for DOGM SPI LCD Support // Pins for DOGM SPI LCD Support
#define DOGLCD_A0 30 #define DOGLCD_A0 30
#define DOGLCD_CS 29 #define DOGLCD_CS 29
// GLCD features // GLCD features
#define LCD_CONTRAST 1 #define LCD_CONTRAST 1
// Uncomment screen orientation // Uncomment screen orientation
// #define LCD_SCREEN_ROT_0 // #define LCD_SCREEN_ROT_0
// #define LCD_SCREEN_ROT_90 // #define LCD_SCREEN_ROT_90
#define LCD_SCREEN_ROT_180 #define LCD_SCREEN_ROT_180
// #define LCD_SCREEN_ROT_270 // #define LCD_SCREEN_ROT_270
#else // standard Hitachi LCD controller #else // standard Hitachi LCD controller
#define LCD_PINS_RS 4 #define LCD_PINS_RS 4
#define LCD_PINS_ENABLE 17 #define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 30 #define LCD_PINS_D4 30
#define LCD_PINS_D5 29 #define LCD_PINS_D5 29
#define LCD_PINS_D6 28 #define LCD_PINS_D6 28
#define LCD_PINS_D7 27 #define LCD_PINS_D7 27
#endif #endif
//The encoder and click button //The encoder and click button
#define BTN_EN1 11 //must be a hardware interrupt pin #define BTN_EN1 11
#define BTN_EN2 10 //must be hardware interrupt pin #define BTN_EN2 10
#define BTN_ENC 16 //the switch #ifdef LCD_I2C_PANELOLU2
#ifdef MELZI
#define BTN_ENC 29 //the click switch
#define SDSS 30 //to use the SD card reader on the Panelolu2 rather than the melzi board
#else
#define BTN_ENC 30 //the click switch
#endif
#else
#define BTN_ENC 16 //the click switch
#endif //Panelolu2
//not connected to a pin //not connected to a pin
#define SDCARDDETECT -1 #define SDCARDDETECT -1
//from the same bit in the RAMPS Newpanel define
//encoder rotation values
#define encrot0 0
#define encrot1 2
#define encrot2 3
#define encrot3 1
#define BLEN_C 2
#define BLEN_B 1
#define BLEN_A 0
#endif //Newpanel #endif //Newpanel
#endif //Ultipanel #endif //Ultipanel
#ifdef MAKRPANEL
#define BEEPER 29
// Pins for DOGM SPI LCD Support
#define DOGLCD_A0 30
#define DOGLCD_CS 17
#define LCD_PIN_BL 28 // backlight LED on PA3
// GLCD features
#define LCD_CONTRAST 1
// Uncomment screen orientation
#define LCD_SCREEN_ROT_0
// #define LCD_SCREEN_ROT_90
// #define LCD_SCREEN_ROT_180
// #define LCD_SCREEN_ROT_270
//The encoder and click button
#define BTN_EN1 11
#define BTN_EN2 10
#define BTN_ENC 16 //the click switch
//not connected to a pin
#define SDCARDDETECT -1
#endif //Makrpanel
#endif #endif
@ -805,17 +1040,17 @@
#define Y_MAX_PIN 28 #define Y_MAX_PIN 28
#define Y_ENABLE_PIN 29 #define Y_ENABLE_PIN 29
#define Z_STEP_PIN 37 #define Z_STEP_PIN 37
#define Z_DIR_PIN 39 #define Z_DIR_PIN 39
#define Z_MIN_PIN 30 #define Z_MIN_PIN 30
#define Z_MAX_PIN 32 #define Z_MAX_PIN 32
#define Z_ENABLE_PIN 35 #define Z_ENABLE_PIN 35
#define HEATER_BED_PIN 4 #define HEATER_BED_PIN 4
#define TEMP_BED_PIN 10 #define TEMP_BED_PIN 10
#define HEATER_0_PIN 2 #define HEATER_0_PIN 2
#define TEMP_0_PIN 8 #define TEMP_0_PIN 8
#define HEATER_1_PIN 3 #define HEATER_1_PIN 3
#define TEMP_1_PIN 9 #define TEMP_1_PIN 9
@ -845,29 +1080,20 @@
//arduino pin witch triggers an piezzo beeper //arduino pin witch triggers an piezzo beeper
#define BEEPER 18 #define BEEPER 18
#define LCD_PINS_RS 20 #define LCD_PINS_RS 20
#define LCD_PINS_ENABLE 17 #define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 16 #define LCD_PINS_D4 16
#define LCD_PINS_D5 21 #define LCD_PINS_D5 21
#define LCD_PINS_D6 5 #define LCD_PINS_D6 5
#define LCD_PINS_D7 6 #define LCD_PINS_D7 6
//buttons are directly attached //buttons are directly attached
#define BTN_EN1 40 #define BTN_EN1 40
#define BTN_EN2 42 #define BTN_EN2 42
#define BTN_ENC 19 //the click #define BTN_ENC 19 //the click
#define BLEN_C 2
#define BLEN_B 1
#define BLEN_A 0
#define SDCARDDETECT 38 #define SDCARDDETECT 38
//encoder rotation values
#define encrot0 0
#define encrot1 2
#define encrot2 3
#define encrot3 1
#else //old style panel with shift register #else //old style panel with shift register
//arduino pin witch triggers an piezzo beeper //arduino pin witch triggers an piezzo beeper
#define BEEPER 18 #define BEEPER 18
@ -877,40 +1103,15 @@
#define SHIFT_LD 42 #define SHIFT_LD 42
#define SHIFT_OUT 40 #define SHIFT_OUT 40
#define SHIFT_EN 17 #define SHIFT_EN 17
#define LCD_PINS_RS 16 #define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 5 #define LCD_PINS_ENABLE 5
#define LCD_PINS_D4 6 #define LCD_PINS_D4 6
#define LCD_PINS_D5 21 #define LCD_PINS_D5 21
#define LCD_PINS_D6 20 #define LCD_PINS_D6 20
#define LCD_PINS_D7 19 #define LCD_PINS_D7 19
//encoder rotation values
#ifndef ULTIMAKERCONTROLLER
#define encrot0 0
#define encrot1 2
#define encrot2 3
#define encrot3 1
#else
#define encrot0 0
#define encrot1 1
#define encrot2 3
#define encrot3 2
#endif
#define SDCARDDETECT -1 #define SDCARDDETECT -1
//bits in the shift register that carry the buttons for:
// left up center down right red
#define BL_LE 7
#define BL_UP 6
#define BL_MI 5
#define BL_DW 4
#define BL_RI 3
#define BL_ST 2
#define BLEN_B 1
#define BLEN_A 0
#endif #endif
#endif //ULTRA_LCD #endif //ULTRA_LCD
@ -942,17 +1143,17 @@
#define Y_MAX_PIN 16 #define Y_MAX_PIN 16
#define Y_ENABLE_PIN 29 #define Y_ENABLE_PIN 29
#define Z_STEP_PIN 37 #define Z_STEP_PIN 37
#define Z_DIR_PIN 39 #define Z_DIR_PIN 39
#define Z_MIN_PIN 19 #define Z_MIN_PIN 19
#define Z_MAX_PIN 18 #define Z_MAX_PIN 18
#define Z_ENABLE_PIN 35 #define Z_ENABLE_PIN 35
#define HEATER_BED_PIN -1 #define HEATER_BED_PIN -1
#define TEMP_BED_PIN -1 #define TEMP_BED_PIN -1
#define HEATER_0_PIN 2 #define HEATER_0_PIN 2
#define TEMP_0_PIN 8 #define TEMP_0_PIN 8
#define HEATER_1_PIN 1 #define HEATER_1_PIN 1
#define TEMP_1_PIN 1 #define TEMP_1_PIN 1
@ -976,10 +1177,10 @@
#define KILL_PIN -1 #define KILL_PIN -1
#define SUICIDE_PIN -1 //PIN that has to be turned on right after start, to keep power flowing. #define SUICIDE_PIN -1 //PIN that has to be turned on right after start, to keep power flowing.
#define LCD_PINS_RS 24 #define LCD_PINS_RS 24
#define LCD_PINS_ENABLE 22 #define LCD_PINS_ENABLE 22
#define LCD_PINS_D4 36 #define LCD_PINS_D4 36
#define LCD_PINS_D5 34 #define LCD_PINS_D5 34
#define LCD_PINS_D6 32 #define LCD_PINS_D6 32
#define LCD_PINS_D7 30 #define LCD_PINS_D7 30
@ -1001,17 +1202,17 @@
#define X_DIR_PIN 16 #define X_DIR_PIN 16
#define X_ENABLE_PIN 48 #define X_ENABLE_PIN 48
#define X_MIN_PIN 37 #define X_MIN_PIN 37
#define X_MAX_PIN 36 #define X_MAX_PIN 36
#define Y_STEP_PIN 54 #define Y_STEP_PIN 54
#define Y_DIR_PIN 47 #define Y_DIR_PIN 47
#define Y_ENABLE_PIN 55 #define Y_ENABLE_PIN 55
#define Y_MIN_PIN 35 #define Y_MIN_PIN 35
#define Y_MAX_PIN 34 #define Y_MAX_PIN 34
#define Z_STEP_PIN 57 #define Z_STEP_PIN 57
#define Z_DIR_PIN 56 #define Z_DIR_PIN 56
#define Z_ENABLE_PIN 62 #define Z_ENABLE_PIN 62
#define Z_MIN_PIN 33 #define Z_MIN_PIN 33
#define Z_MAX_PIN 32 #define Z_MAX_PIN 32
@ -1029,45 +1230,76 @@
#define LED_PIN 13 #define LED_PIN 13
#define FAN_PIN 7 #define FAN_PIN 7
//additional FAN1 PIN (e.g. useful for electronics fan or light on/off) on PIN 8 //additional FAN1 PIN (e.g. useful for electronics fan or light on/off) on PIN 8
#define PS_ON_PIN 45 #define PS_ON_PIN 45
#define KILL_PIN 46 #define KILL_PIN 46
#define HEATER_0_PIN 2 // EXTRUDER 1 #if (TEMP_SENSOR_0==0)
#define HEATER_1_PIN 3 // EXTRUDER 2 #define TEMP_0_PIN -1
#define HEATER_2_PIN 6 // EXTRUDER 3 #define HEATER_0_PIN -1
//optional FAN1 can be used as 4th heater output: #define HEATER_3_PIN 8 // EXTRUDER 4 #else
#define HEATER_BED_PIN 9 // BED #define HEATER_0_PIN 2 // EXTRUDER 1
#if (TEMP_SENSOR_0==-1)
#define TEMP_0_PIN 6 // ANALOG NUMBERING - connector *K1* on RUMBA thermocouple ADD ON is used
#else
#define TEMP_0_PIN 15 // ANALOG NUMBERING - default connector for thermistor *T0* on rumba board is used
#endif
#endif
#define TEMP_0_PIN 15 // ANALOG NUMBERING #if (TEMP_SENSOR_1==0)
#define TEMP_1_PIN 14 // ANALOG NUMBERING #define TEMP_1_PIN -1
#define TEMP_2_PIN 13 // ANALOG NUMBERING #define HEATER_1_PIN -1
//optional for extruder 4 or chamber: #define TEMP_2_PIN 12 // ANALOG NUMBERING #else
#define TEMP_BED_PIN 11 // ANALOG NUMBERING #define HEATER_1_PIN 3 // EXTRUDER 2
#if (TEMP_SENSOR_1==-1)
#define TEMP_1_PIN 5 // ANALOG NUMBERING - connector *K2* on RUMBA thermocouple ADD ON is used
#else
#define TEMP_1_PIN 14 // ANALOG NUMBERING - default connector for thermistor *T1* on rumba board is used
#endif
#endif
#if (TEMP_SENSOR_2==0)
#define TEMP_2_PIN -1
#define HEATER_2_PIN -1
#else
#define HEATER_2_PIN 6 // EXTRUDER 3
#if (TEMP_SENSOR_2==-1)
#define TEMP_2_PIN 7 // ANALOG NUMBERING - connector *K3* on RUMBA thermocouple ADD ON is used <-- this can not be used when TEMP_SENSOR_BED is defined as thermocouple
#else
#define TEMP_2_PIN 13 // ANALOG NUMBERING - default connector for thermistor *T2* on rumba board is used
#endif
#endif
//optional for extruder 4 or chamber: #define TEMP_X_PIN 12 // ANALOG NUMBERING - default connector for thermistor *T3* on rumba board is used
//optional FAN1 can be used as 4th heater output: #define HEATER_3_PIN 8 // EXTRUDER 4
#if (TEMP_SENSOR_BED==0)
#define TEMP_BED_PIN -1
#define HEATER_BED_PIN -1
#else
#define HEATER_BED_PIN 9 // BED
#if (TEMP_SENSOR_BED==-1)
#define TEMP_BED_PIN 7 // ANALOG NUMBERING - connector *K3* on RUMBA thermocouple ADD ON is used <-- this can not be used when TEMP_SENSOR_2 is defined as thermocouple
#else
#define TEMP_BED_PIN 11 // ANALOG NUMBERING - default connector for thermistor *THB* on rumba board is used
#endif
#endif
#define SDPOWER -1 #define SDPOWER -1
#define SDSS 53 #define SDSS 53
#define SDCARDDETECT 49 #define SDCARDDETECT 49
#define BEEPER 44 #define BEEPER 44
#define LCD_PINS_RS 19 #define LCD_PINS_RS 19
#define LCD_PINS_ENABLE 42 #define LCD_PINS_ENABLE 42
#define LCD_PINS_D4 18 #define LCD_PINS_D4 18
#define LCD_PINS_D5 38 #define LCD_PINS_D5 38
#define LCD_PINS_D6 41 #define LCD_PINS_D6 41
#define LCD_PINS_D7 40 #define LCD_PINS_D7 40
#define BTN_EN1 11 #define BTN_EN1 11
#define BTN_EN2 12 #define BTN_EN2 12
#define BTN_ENC 43 #define BTN_ENC 43
//encoder rotation values
#define BLEN_C 2
#define BLEN_B 1
#define BLEN_A 0
#define encrot0 0
#define encrot1 2
#define encrot2 3
#define encrot3 1
#endif //MOTHERBOARD==80 #endif //MOTHERBOARD==80
@ -1238,7 +1470,7 @@
#define LED_PIN -1 #define LED_PIN -1
#define FAN_PIN -1 #define FAN_PIN -1
#define PS_ON_PIN 14 #define PS_ON_PIN 14
#define KILL_PIN -1 #define KILL_PIN -1
@ -1277,7 +1509,7 @@
* MISO (D 6) PB6 7| |34 PA6 (AI 6 / D25) * MISO (D 6) PB6 7| |34 PA6 (AI 6 / D25)
* SCK (D 7) PB7 8| |33 PA7 (AI 7 / D24) * SCK (D 7) PB7 8| |33 PA7 (AI 7 / D24)
* RST 9| |32 AREF * RST 9| |32 AREF
* VCC 10| |31 GND * VCC 10| |31 GND
* GND 11| |30 AVCC * GND 11| |30 AVCC
* XTAL2 12| |29 PC7 (D 23) * XTAL2 12| |29 PC7 (D 23)
* XTAL1 13| |28 PC6 (D 22) * XTAL1 13| |28 PC6 (D 22)
@ -1334,7 +1566,7 @@
#define KILL_PIN -1 #define KILL_PIN -1
#define HEATER_0_PIN 4 #define HEATER_0_PIN 4
#define HEATER_1_PIN -1 // 12 #define HEATER_1_PIN -1 // 12
#define HEATER_2_PIN -1 // 13 #define HEATER_2_PIN -1 // 13
#define TEMP_0_PIN 0 //D27 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! #define TEMP_0_PIN 0 //D27 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
#define TEMP_1_PIN -1 // 1 #define TEMP_1_PIN -1 // 1
@ -1372,12 +1604,12 @@
#define E0_ENABLE_PIN 10 #define E0_ENABLE_PIN 10
/* future proofing */ /* future proofing */
#define __FS 20 #define __FS 20
#define __FD 19 #define __FD 19
#define __GS 18 #define __GS 18
#define __GD 13 #define __GD 13
#define UNUSED_PWM 14 /* PWM on LEFT connector */ #define UNUSED_PWM 14 /* PWM on LEFT connector */
#define E1_STEP_PIN -1 // 21 #define E1_STEP_PIN -1 // 21
#define E1_DIR_PIN -1 // 20 #define E1_DIR_PIN -1 // 20
@ -1396,18 +1628,18 @@
#define KILL_PIN -1 #define KILL_PIN -1
#define HEATER_0_PIN 3 /*DONE PWM on RIGHT connector */ #define HEATER_0_PIN 3 /*DONE PWM on RIGHT connector */
#define HEATER_1_PIN -1 #define HEATER_1_PIN -1
#define HEATER_2_PIN -1 #define HEATER_2_PIN -1
#define HEATER_1_PIN -1 #define HEATER_1_PIN -1
#define HEATER_2_PIN -1 #define HEATER_2_PIN -1
#define TEMP_0_PIN 0 // ANALOG INPUT NUMBERING #define TEMP_0_PIN 0 // ANALOG INPUT NUMBERING
#define TEMP_1_PIN 1 // ANALOG #define TEMP_1_PIN 1 // ANALOG
#define TEMP_2_PIN -1 // 2 #define TEMP_2_PIN -1 // 2
#define HEATER_BED_PIN 4 #define HEATER_BED_PIN 4
#define TEMP_BED_PIN 2 // 1,2 or I2C #define TEMP_BED_PIN 2 // 1,2 or I2C
#define I2C_SCL 16 #define I2C_SCL 16
#define I2C_SDA 17 #define I2C_SDA 17
#endif #endif
@ -1448,7 +1680,7 @@
#define Z_MS2_PIN 67 #define Z_MS2_PIN 67
#define HEATER_BED_PIN 3 #define HEATER_BED_PIN 3
#define TEMP_BED_PIN 2 #define TEMP_BED_PIN 2
#define HEATER_0_PIN 9 #define HEATER_0_PIN 9
#define TEMP_0_PIN 0 #define TEMP_0_PIN 0
@ -1456,7 +1688,11 @@
#define HEATER_1_PIN 7 #define HEATER_1_PIN 7
#define TEMP_1_PIN 1 #define TEMP_1_PIN 1
#ifdef BARICUDA
#define HEATER_2_PIN 6
#else
#define HEATER_2_PIN -1 #define HEATER_2_PIN -1
#endif
#define TEMP_2_PIN -1 #define TEMP_2_PIN -1
#define E0_STEP_PIN 34 #define E0_STEP_PIN 34
@ -1491,7 +1727,6 @@
#if MOTHERBOARD == 70 #if MOTHERBOARD == 70
#define KNOWN_BOARD 1 #define KNOWN_BOARD 1
//////////////////FIX THIS//////////////
#ifndef __AVR_ATmega2560__ #ifndef __AVR_ATmega2560__
#error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu. #error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
@ -1537,9 +1772,9 @@
#define HEATER_0_PIN 9 // EXTRUDER 1 #define HEATER_0_PIN 9 // EXTRUDER 1
#define HEATER_1_PIN 8 // EXTRUDER 2 (FAN On Sprinter) #define HEATER_1_PIN 8 // EXTRUDER 2 (FAN On Sprinter)
#define HEATER_2_PIN -1 #define HEATER_2_PIN -1
#if TEMP_SENSOR_0 == -1 #if TEMP_SENSOR_0 == -1
#define TEMP_0_PIN 8 // ANALOG NUMBERING #define TEMP_0_PIN 8 // ANALOG NUMBERING
#else #else
#define TEMP_0_PIN 13 // ANALOG NUMBERING #define TEMP_0_PIN 13 // ANALOG NUMBERING
@ -1551,21 +1786,21 @@
#define HEATER_BED_PIN 10 // BED #define HEATER_BED_PIN 10 // BED
#define TEMP_BED_PIN 14 // ANALOG NUMBERING #define TEMP_BED_PIN 14 // ANALOG NUMBERING
#define BEEPER 33 // Beeper on AUX-4 #define BEEPER 33 // Beeper on AUX-4
#ifdef ULTRA_LCD #ifdef ULTRA_LCD
#ifdef NEWPANEL #ifdef NEWPANEL
//arduino pin which triggers an piezzo beeper //arduino pin which triggers an piezzo beeper
#define LCD_PINS_RS 16 #define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17 #define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23 #define LCD_PINS_D4 23
#define LCD_PINS_D5 25 #define LCD_PINS_D5 25
#define LCD_PINS_D6 27 #define LCD_PINS_D6 27
#define LCD_PINS_D7 29 #define LCD_PINS_D7 29
//buttons are directly attached using AUX-2 //buttons are directly attached using AUX-2
#define BTN_EN1 59 #define BTN_EN1 59
#define BTN_EN2 64 #define BTN_EN2 64
@ -1587,12 +1822,220 @@
#endif #endif
/****************************************************************************************
* MegaTronics v2.0
*
****************************************************************************************/
#if MOTHERBOARD == 701
#define KNOWN_BOARD 1
#ifndef __AVR_ATmega2560__
#error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
#endif
#define LARGE_FLASH true
#define X_STEP_PIN 26
#define X_DIR_PIN 27
#define X_ENABLE_PIN 25
#define X_MIN_PIN 37
#define X_MAX_PIN 40 //2 //Max endstops default to disabled "-1", set to commented value to enable.
#define Y_STEP_PIN 4 // A6
#define Y_DIR_PIN 54 // A0
#define Y_ENABLE_PIN 5
#define Y_MIN_PIN 41
#define Y_MAX_PIN 38 //15
#define Z_STEP_PIN 56 // A2
#define Z_DIR_PIN 60 // A6
#define Z_ENABLE_PIN 55 // A1
#define Z_MIN_PIN 18
#define Z_MAX_PIN 19
#define E0_STEP_PIN 35
#define E0_DIR_PIN 36
#define E0_ENABLE_PIN 34
#define E1_STEP_PIN 29
#define E1_DIR_PIN 39
#define E1_ENABLE_PIN 28
#define E2_STEP_PIN 23
#define E2_DIR_PIN 24
#define E2_ENABLE_PIN 22
#define SDPOWER -1
#define SDSS 53
#define LED_PIN 13
#define FAN_PIN 7
#define FAN2_PIN 6
#define PS_ON_PIN 12
#define KILL_PIN -1
#define HEATER_0_PIN 9 // EXTRUDER 1
#define HEATER_1_PIN 8 // EXTRUDER 2
#define HEATER_2_PIN -1
#if TEMP_SENSOR_0 == -1
#define TEMP_0_PIN 4 // ANALOG NUMBERING
#else
#define TEMP_0_PIN 13 // ANALOG NUMBERING
#endif
#if TEMP_SENSOR_1 == -1
#define TEMP_1_PIN 8 // ANALOG NUMBERING
#else
#define TEMP_1_PIN 15 // ANALOG NUMBERING
#endif
#define TEMP_2_PIN -1 // ANALOG NUMBERING
#define HEATER_BED_PIN 10 // BED
#if TEMP_SENSOR_BED == -1
#define TEMP_BED_PIN 8 // ANALOG NUMBERING
#else
#define TEMP_BED_PIN 14 // ANALOG NUMBERING
#endif
#define BEEPER 64
#define LCD_PINS_RS 14
#define LCD_PINS_ENABLE 15
#define LCD_PINS_D4 30
#define LCD_PINS_D5 31
#define LCD_PINS_D6 32
#define LCD_PINS_D7 33
//buttons are directly attached using keypad
#define BTN_EN1 61
#define BTN_EN2 59
#define BTN_ENC 43 //the click
#define BLEN_C 2
#define BLEN_B 1
#define BLEN_A 0
#define SDCARDDETECT -1 // Megatronics does not use this port
//encoder rotation values
#define encrot0 0
#define encrot1 2
#define encrot2 3
#define encrot3 1
#endif
/****************************************************************************************
* Minitronics v1.0
*
****************************************************************************************/
#if MOTHERBOARD == 702
#define KNOWN_BOARD 1
#ifndef __AVR_ATmega1281__
#error Oops! Make sure you have 'Minitronics ' selected from the 'Tools -> Boards' menu.
#endif
#define LARGE_FLASH true
#define X_STEP_PIN 48
#define X_DIR_PIN 47
#define X_ENABLE_PIN 49
#define X_MIN_PIN 5
#define X_MAX_PIN -1 //2 //Max endstops default to disabled "-1", set to commented value to enable.
#define Y_STEP_PIN 39 // A6
#define Y_DIR_PIN 40 // A0
#define Y_ENABLE_PIN 38
#define Y_MIN_PIN 2
#define Y_MAX_PIN -1 //15
#define Z_STEP_PIN 42 // A2
#define Z_DIR_PIN 43 // A6
#define Z_ENABLE_PIN 41 // A1
#define Z_MIN_PIN 6
#define Z_MAX_PIN -1
#define E0_STEP_PIN 45
#define E0_DIR_PIN 44
#define E0_ENABLE_PIN 27
#define E1_STEP_PIN 36
#define E1_DIR_PIN 35
#define E1_ENABLE_PIN 37
#define E2_STEP_PIN -1
#define E2_DIR_PIN -1
#define E2_ENABLE_PIN -1
#define SDPOWER -1
#define SDSS 16
#define LED_PIN 46
#define FAN_PIN 9
#define FAN2_PIN -1
#define PS_ON_PIN -1
#define KILL_PIN -1
#define HEATER_0_PIN 7 // EXTRUDER 1
#define HEATER_1_PIN 8 // EXTRUDER 2
#define HEATER_2_PIN -1
#define TEMP_0_PIN 7 // ANALOG NUMBERING
#define TEMP_1_PIN 6 // ANALOG NUMBERING
#define TEMP_2_PIN -1 // ANALOG NUMBERING
#define HEATER_BED_PIN 3 // BED
#define TEMP_BED_PIN 6 // ANALOG NUMBERING
#define BEEPER -1
#define LCD_PINS_RS -1
#define LCD_PINS_ENABLE -1
#define LCD_PINS_D4 -1
#define LCD_PINS_D5 -1
#define LCD_PINS_D6 -1
#define LCD_PINS_D7 -1
//buttons are directly attached using keypad
#define BTN_EN1 -1
#define BTN_EN2 -1
#define BTN_ENC -1 //the click
#define BLEN_C 2
#define BLEN_B 1
#define BLEN_A 0
#define SDCARDDETECT -1 // Megatronics does not use this port
//encoder rotation values
#define encrot0 0
#define encrot1 2
#define encrot2 3
#define encrot3 1
#endif
#ifndef KNOWN_BOARD #ifndef KNOWN_BOARD
#error Unknown MOTHERBOARD value in configuration.h #error Unknown MOTHERBOARD value in configuration.h
#endif #endif
//List of pins which to ignore when asked to change by gcode, 0 and 1 are RX and TX, do not mess with those! //List of pins which to ignore when asked to change by gcode, 0 and 1 are RX and TX, do not mess with those!
#define _E0_PINS E0_STEP_PIN, E0_DIR_PIN, E0_ENABLE_PIN, HEATER_0_PIN, #define _E0_PINS E0_STEP_PIN, E0_DIR_PIN, E0_ENABLE_PIN, HEATER_0_PIN,
#if EXTRUDERS > 1 #if EXTRUDERS > 1
#define _E1_PINS E1_STEP_PIN, E1_DIR_PIN, E1_ENABLE_PIN, HEATER_1_PIN, #define _E1_PINS E1_STEP_PIN, E1_DIR_PIN, E1_ENABLE_PIN, HEATER_1_PIN,
#else #else
@ -1640,8 +2083,15 @@
#define Z_MAX_PIN -1 #define Z_MAX_PIN -1
#endif #endif
#ifdef DISABLE_MIN_ENDSTOPS
#define X_MIN_PIN -1
#define Y_MIN_PIN -1
#define Z_MIN_PIN -1
#endif
#define SENSITIVE_PINS {0, 1, X_STEP_PIN, X_DIR_PIN, X_ENABLE_PIN, X_MIN_PIN, X_MAX_PIN, Y_STEP_PIN, Y_DIR_PIN, Y_ENABLE_PIN, Y_MIN_PIN, Y_MAX_PIN, Z_STEP_PIN, Z_DIR_PIN, Z_ENABLE_PIN, Z_MIN_PIN, Z_MAX_PIN, PS_ON_PIN, \ #define SENSITIVE_PINS {0, 1, X_STEP_PIN, X_DIR_PIN, X_ENABLE_PIN, X_MIN_PIN, X_MAX_PIN, Y_STEP_PIN, Y_DIR_PIN, Y_ENABLE_PIN, Y_MIN_PIN, Y_MAX_PIN, Z_STEP_PIN, Z_DIR_PIN, Z_ENABLE_PIN, Z_MIN_PIN, Z_MAX_PIN, PS_ON_PIN, \
HEATER_BED_PIN, FAN_PIN, \ HEATER_BED_PIN, FAN_PIN, \
_E0_PINS _E1_PINS _E2_PINS \ _E0_PINS _E1_PINS _E2_PINS \
analogInputToDigitalPin(TEMP_0_PIN), analogInputToDigitalPin(TEMP_1_PIN), analogInputToDigitalPin(TEMP_2_PIN), analogInputToDigitalPin(TEMP_BED_PIN) } analogInputToDigitalPin(TEMP_0_PIN), analogInputToDigitalPin(TEMP_1_PIN), analogInputToDigitalPin(TEMP_2_PIN), analogInputToDigitalPin(TEMP_BED_PIN) }
#endif #endif

104
Marlin/planner.cpp
View file

@ -98,7 +98,7 @@ volatile unsigned char block_buffer_tail; // Index of the block to pro
//=============================private variables ============================ //=============================private variables ============================
//=========================================================================== //===========================================================================
#ifdef PREVENT_DANGEROUS_EXTRUDE #ifdef PREVENT_DANGEROUS_EXTRUDE
bool allow_cold_extrude=false; float extrude_min_temp=EXTRUDE_MINTEMP;
#endif #endif
#ifdef XY_FREQUENCY_LIMIT #ifdef XY_FREQUENCY_LIMIT
#define MAX_FREQ_TIME (1000000.0/XY_FREQUENCY_LIMIT) #define MAX_FREQ_TIME (1000000.0/XY_FREQUENCY_LIMIT)
@ -439,12 +439,20 @@ void check_axes_activity()
unsigned char z_active = 0; unsigned char z_active = 0;
unsigned char e_active = 0; unsigned char e_active = 0;
unsigned char tail_fan_speed = fanSpeed; unsigned char tail_fan_speed = fanSpeed;
#ifdef BARICUDA
unsigned char tail_valve_pressure = ValvePressure;
unsigned char tail_e_to_p_pressure = EtoPPressure;
#endif
block_t *block; block_t *block;
if(block_buffer_tail != block_buffer_head) if(block_buffer_tail != block_buffer_head)
{ {
uint8_t block_index = block_buffer_tail; uint8_t block_index = block_buffer_tail;
tail_fan_speed = block_buffer[block_index].fan_speed; tail_fan_speed = block_buffer[block_index].fan_speed;
#ifdef BARICUDA
tail_valve_pressure = block_buffer[block_index].valve_pressure;
tail_e_to_p_pressure = block_buffer[block_index].e_to_p_pressure;
#endif
while(block_index != block_buffer_head) while(block_index != block_buffer_head)
{ {
block = &block_buffer[block_index]; block = &block_buffer[block_index];
@ -464,28 +472,40 @@ void check_axes_activity()
disable_e1(); disable_e1();
disable_e2(); disable_e2();
} }
#if FAN_PIN > -1 #if defined(FAN_PIN) && FAN_PIN > -1
#ifndef FAN_SOFT_PWM #ifdef FAN_KICKSTART_TIME
#ifdef FAN_KICKSTART_TIME static unsigned long fan_kick_end;
static unsigned long fan_kick_end; if (tail_fan_speed) {
if (tail_fan_speed) { if (fan_kick_end == 0) {
if (fan_kick_end == 0) { // Just starting up fan - run at full power.
// Just starting up fan - run at full power. fan_kick_end = millis() + FAN_KICKSTART_TIME;
fan_kick_end = millis() + FAN_KICKSTART_TIME; tail_fan_speed = 255;
tail_fan_speed = 255; } else if (fan_kick_end > millis())
} else if (fan_kick_end > millis()) // Fan still spinning up.
// Fan still spinning up. tail_fan_speed = 255;
tail_fan_speed = 255; } else {
} else { fan_kick_end = 0;
fan_kick_end = 0; }
} #endif//FAN_KICKSTART_TIME
#endif//FAN_KICKSTART_TIME #ifdef FAN_SOFT_PWM
analogWrite(FAN_PIN,tail_fan_speed); fanSpeedSoftPwm = tail_fan_speed;
#else
analogWrite(FAN_PIN,tail_fan_speed);
#endif//!FAN_SOFT_PWM #endif//!FAN_SOFT_PWM
#endif//FAN_PIN > -1 #endif//FAN_PIN > -1
#ifdef AUTOTEMP #ifdef AUTOTEMP
getHighESpeed(); getHighESpeed();
#endif #endif
#ifdef BARICUDA
#if defined(HEATER_1_PIN) && HEATER_1_PIN > -1
analogWrite(HEATER_1_PIN,tail_valve_pressure);
#endif
#if defined(HEATER_2_PIN) && HEATER_2_PIN > -1
analogWrite(HEATER_2_PIN,tail_e_to_p_pressure);
#endif
#endif
} }
@ -519,7 +539,7 @@ void plan_buffer_line(const float &x, const float &y, const float &z, const floa
#ifdef PREVENT_DANGEROUS_EXTRUDE #ifdef PREVENT_DANGEROUS_EXTRUDE
if(target[E_AXIS]!=position[E_AXIS]) if(target[E_AXIS]!=position[E_AXIS])
{ {
if(degHotend(active_extruder)<EXTRUDE_MINTEMP && !allow_cold_extrude) if(degHotend(active_extruder)<extrude_min_temp)
{ {
position[E_AXIS]=target[E_AXIS]; //behave as if the move really took place, but ignore E part position[E_AXIS]=target[E_AXIS]; //behave as if the move really took place, but ignore E part
SERIAL_ECHO_START; SERIAL_ECHO_START;
@ -544,8 +564,16 @@ void plan_buffer_line(const float &x, const float &y, const float &z, const floa
block->busy = false; block->busy = false;
// Number of steps for each axis // Number of steps for each axis
block->steps_x = labs(target[X_AXIS]-position[X_AXIS]); #ifndef COREXY
block->steps_y = labs(target[Y_AXIS]-position[Y_AXIS]); // default non-h-bot planning
block->steps_x = labs(target[X_AXIS]-position[X_AXIS]);
block->steps_y = labs(target[Y_AXIS]-position[Y_AXIS]);
#else
// corexy planning
// these equations follow the form of the dA and dB equations on http://www.corexy.com/theory.html
block->steps_x = labs((target[X_AXIS]-position[X_AXIS]) + (target[Y_AXIS]-position[Y_AXIS]));
block->steps_y = labs((target[X_AXIS]-position[X_AXIS]) - (target[Y_AXIS]-position[Y_AXIS]));
#endif
block->steps_z = labs(target[Z_AXIS]-position[Z_AXIS]); block->steps_z = labs(target[Z_AXIS]-position[Z_AXIS]);
block->steps_e = labs(target[E_AXIS]-position[E_AXIS]); block->steps_e = labs(target[E_AXIS]-position[E_AXIS]);
block->steps_e *= extrudemultiply; block->steps_e *= extrudemultiply;
@ -559,9 +587,14 @@ void plan_buffer_line(const float &x, const float &y, const float &z, const floa
} }
block->fan_speed = fanSpeed; block->fan_speed = fanSpeed;
#ifdef BARICUDA
block->valve_pressure = ValvePressure;
block->e_to_p_pressure = EtoPPressure;
#endif
// Compute direction bits for this block // Compute direction bits for this block
block->direction_bits = 0; block->direction_bits = 0;
#ifndef COREXY
if (target[X_AXIS] < position[X_AXIS]) if (target[X_AXIS] < position[X_AXIS])
{ {
block->direction_bits |= (1<<X_AXIS); block->direction_bits |= (1<<X_AXIS);
@ -570,6 +603,16 @@ void plan_buffer_line(const float &x, const float &y, const float &z, const floa
{ {
block->direction_bits |= (1<<Y_AXIS); block->direction_bits |= (1<<Y_AXIS);
} }
#else
if ((target[X_AXIS]-position[X_AXIS]) + (target[Y_AXIS]-position[Y_AXIS]) < 0)
{
block->direction_bits |= (1<<X_AXIS);
}
if ((target[X_AXIS]-position[X_AXIS]) - (target[Y_AXIS]-position[Y_AXIS]) < 0)
{
block->direction_bits |= (1<<Y_AXIS);
}
#endif
if (target[Z_AXIS] < position[Z_AXIS]) if (target[Z_AXIS] < position[Z_AXIS])
{ {
block->direction_bits |= (1<<Z_AXIS); block->direction_bits |= (1<<Z_AXIS);
@ -614,8 +657,13 @@ void plan_buffer_line(const float &x, const float &y, const float &z, const floa
} }
float delta_mm[4]; float delta_mm[4];
delta_mm[X_AXIS] = (target[X_AXIS]-position[X_AXIS])/axis_steps_per_unit[X_AXIS]; #ifndef COREXY
delta_mm[Y_AXIS] = (target[Y_AXIS]-position[Y_AXIS])/axis_steps_per_unit[Y_AXIS]; delta_mm[X_AXIS] = (target[X_AXIS]-position[X_AXIS])/axis_steps_per_unit[X_AXIS];
delta_mm[Y_AXIS] = (target[Y_AXIS]-position[Y_AXIS])/axis_steps_per_unit[Y_AXIS];
#else
delta_mm[X_AXIS] = ((target[X_AXIS]-position[X_AXIS]) + (target[Y_AXIS]-position[Y_AXIS]))/axis_steps_per_unit[X_AXIS];
delta_mm[Y_AXIS] = ((target[X_AXIS]-position[X_AXIS]) - (target[Y_AXIS]-position[Y_AXIS]))/axis_steps_per_unit[Y_AXIS];
#endif
delta_mm[Z_AXIS] = (target[Z_AXIS]-position[Z_AXIS])/axis_steps_per_unit[Z_AXIS]; delta_mm[Z_AXIS] = (target[Z_AXIS]-position[Z_AXIS])/axis_steps_per_unit[Z_AXIS];
delta_mm[E_AXIS] = ((target[E_AXIS]-position[E_AXIS])/axis_steps_per_unit[E_AXIS])*extrudemultiply/100.0; delta_mm[E_AXIS] = ((target[E_AXIS]-position[E_AXIS])/axis_steps_per_unit[E_AXIS])*extrudemultiply/100.0;
if ( block->steps_x <=dropsegments && block->steps_y <=dropsegments && block->steps_z <=dropsegments ) if ( block->steps_x <=dropsegments && block->steps_y <=dropsegments && block->steps_z <=dropsegments )
@ -735,7 +783,7 @@ void plan_buffer_line(const float &x, const float &y, const float &z, const floa
block->acceleration_st = axis_steps_per_sqr_second[Z_AXIS]; block->acceleration_st = axis_steps_per_sqr_second[Z_AXIS];
} }
block->acceleration = block->acceleration_st / steps_per_mm; block->acceleration = block->acceleration_st / steps_per_mm;
block->acceleration_rate = (long)((float)block->acceleration_st * 8.388608); block->acceleration_rate = (long)((float)block->acceleration_st * (16777216.0 / (F_CPU / 8.0)));
#if 0 // Use old jerk for now #if 0 // Use old jerk for now
// Compute path unit vector // Compute path unit vector
@ -896,12 +944,12 @@ uint8_t movesplanned()
return (block_buffer_head-block_buffer_tail + BLOCK_BUFFER_SIZE) & (BLOCK_BUFFER_SIZE - 1); return (block_buffer_head-block_buffer_tail + BLOCK_BUFFER_SIZE) & (BLOCK_BUFFER_SIZE - 1);
} }
void allow_cold_extrudes(bool allow)
{
#ifdef PREVENT_DANGEROUS_EXTRUDE #ifdef PREVENT_DANGEROUS_EXTRUDE
allow_cold_extrude=allow; void set_extrude_min_temp(float temp)
#endif {
extrude_min_temp=temp;
} }
#endif
// Calculate the steps/s^2 acceleration rates, based on the mm/s^s // Calculate the steps/s^2 acceleration rates, based on the mm/s^s
void reset_acceleration_rates() void reset_acceleration_rates()

8
Marlin/planner.h
View file

@ -60,6 +60,10 @@ typedef struct {
unsigned long final_rate; // The minimal rate at exit unsigned long final_rate; // The minimal rate at exit
unsigned long acceleration_st; // acceleration steps/sec^2 unsigned long acceleration_st; // acceleration steps/sec^2
unsigned long fan_speed; unsigned long fan_speed;
#ifdef BARICUDA
unsigned long valve_pressure;
unsigned long e_to_p_pressure;
#endif
volatile char busy; volatile char busy;
} block_t; } block_t;
@ -135,7 +139,9 @@ FORCE_INLINE bool blocks_queued()
return true; return true;
} }
void allow_cold_extrudes(bool allow); #ifdef PREVENT_DANGEROUS_EXTRUDE
void set_extrude_min_temp(float temp);
#endif
void reset_acceleration_rates(); void reset_acceleration_rates();
#endif #endif

287
Marlin/stepper.cpp
View file

@ -29,7 +29,7 @@
#include "language.h" #include "language.h"
#include "cardreader.h" #include "cardreader.h"
#include "speed_lookuptable.h" #include "speed_lookuptable.h"
#if DIGIPOTSS_PIN > -1 #if defined(DIGIPOTSS_PIN) && DIGIPOTSS_PIN > -1
#include <SPI.h> #include <SPI.h>
#endif #endif
@ -69,9 +69,9 @@ volatile long endstops_stepsTotal,endstops_stepsDone;
static volatile bool endstop_x_hit=false; static volatile bool endstop_x_hit=false;
static volatile bool endstop_y_hit=false; static volatile bool endstop_y_hit=false;
static volatile bool endstop_z_hit=false; static volatile bool endstop_z_hit=false;
#ifdef ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED #ifdef ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
bool abort_on_endstop_hit = false; bool abort_on_endstop_hit = false;
#endif #endif
static bool old_x_min_endstop=false; static bool old_x_min_endstop=false;
static bool old_x_max_endstop=false; static bool old_x_max_endstop=false;
@ -184,20 +184,20 @@ void checkHitEndstops()
SERIAL_ECHOPAIR(" Z:",(float)endstops_trigsteps[Z_AXIS]/axis_steps_per_unit[Z_AXIS]); SERIAL_ECHOPAIR(" Z:",(float)endstops_trigsteps[Z_AXIS]/axis_steps_per_unit[Z_AXIS]);
LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT "Z"); LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT "Z");
} }
SERIAL_ECHOLN(""); SERIAL_ECHOLN("");
endstop_x_hit=false; endstop_x_hit=false;
endstop_y_hit=false; endstop_y_hit=false;
endstop_z_hit=false; endstop_z_hit=false;
#ifdef ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED #ifdef ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
if (abort_on_endstop_hit) if (abort_on_endstop_hit)
{ {
card.sdprinting = false; card.sdprinting = false;
card.closefile(); card.closefile();
quickStop(); quickStop();
setTargetHotend0(0); setTargetHotend0(0);
setTargetHotend1(0); setTargetHotend1(0);
setTargetHotend2(0); setTargetHotend2(0);
} }
#endif #endif
} }
} }
@ -272,7 +272,7 @@ FORCE_INLINE unsigned short calc_timer(unsigned short step_rate) {
timer = (unsigned short)pgm_read_word_near(table_address); timer = (unsigned short)pgm_read_word_near(table_address);
timer -= (((unsigned short)pgm_read_word_near(table_address+2) * (unsigned char)(step_rate & 0x0007))>>3); timer -= (((unsigned short)pgm_read_word_near(table_address+2) * (unsigned char)(step_rate & 0x0007))>>3);
} }
if(timer < 100) { timer = 100; MYSERIAL.print(MSG_STEPPER_TO_HIGH); MYSERIAL.println(step_rate); }//(20kHz this should never happen) if(timer < 100) { timer = 100; MYSERIAL.print(MSG_STEPPER_TOO_HIGH); MYSERIAL.println(step_rate); }//(20kHz this should never happen)
return timer; return timer;
} }
@ -345,53 +345,89 @@ ISR(TIMER1_COMPA_vect)
// Set directions TO DO This should be done once during init of trapezoid. Endstops -> interrupt // Set directions TO DO This should be done once during init of trapezoid. Endstops -> interrupt
out_bits = current_block->direction_bits; out_bits = current_block->direction_bits;
// Set direction en check limit switches
if ((out_bits & (1<<X_AXIS)) != 0) { // stepping along -X axis // Set the direction bits (X_AXIS=A_AXIS and Y_AXIS=B_AXIS for COREXY)
#if !defined COREXY //NOT COREXY if((out_bits & (1<<X_AXIS))!=0){
#ifdef DUAL_X_CARRIAGE
if (active_extruder != 0)
WRITE(X2_DIR_PIN,INVERT_X_DIR);
else
#endif
WRITE(X_DIR_PIN, INVERT_X_DIR); WRITE(X_DIR_PIN, INVERT_X_DIR);
#endif
count_direction[X_AXIS]=-1; count_direction[X_AXIS]=-1;
}
else{
#ifdef DUAL_X_CARRIAGE
if (active_extruder != 0)
WRITE(X2_DIR_PIN,!INVERT_X_DIR);
else
#endif
WRITE(X_DIR_PIN, !INVERT_X_DIR);
count_direction[X_AXIS]=1;
}
if((out_bits & (1<<Y_AXIS))!=0){
WRITE(Y_DIR_PIN, INVERT_Y_DIR);
count_direction[Y_AXIS]=-1;
}
else{
WRITE(Y_DIR_PIN, !INVERT_Y_DIR);
count_direction[Y_AXIS]=1;
}
// Set direction en check limit switches
#ifndef COREXY
if ((out_bits & (1<<X_AXIS)) != 0) { // stepping along -X axis
#else
if ((((out_bits & (1<<X_AXIS)) != 0)&&(out_bits & (1<<Y_AXIS)) != 0)) { //-X occurs for -A and -B
#endif
CHECK_ENDSTOPS CHECK_ENDSTOPS
{ {
#if X_MIN_PIN > -1 #ifdef DUAL_X_CARRIAGE
bool x_min_endstop=(READ(X_MIN_PIN) != X_ENDSTOPS_INVERTING); // with 2 x-carriages, endstops are only checked in the homing direction for the active extruder
if(x_min_endstop && old_x_min_endstop && (current_block->steps_x > 0)) { if ((active_extruder == 0 && X_HOME_DIR == -1) || (active_extruder != 0 && X2_HOME_DIR == -1))
endstops_trigsteps[X_AXIS] = count_position[X_AXIS]; #endif
endstop_x_hit=true; {
step_events_completed = current_block->step_event_count; #if defined(X_MIN_PIN) && X_MIN_PIN > -1
} bool x_min_endstop=(READ(X_MIN_PIN) != X_ENDSTOPS_INVERTING);
old_x_min_endstop = x_min_endstop; if(x_min_endstop && old_x_min_endstop && (current_block->steps_x > 0)) {
#endif endstops_trigsteps[X_AXIS] = count_position[X_AXIS];
endstop_x_hit=true;
step_events_completed = current_block->step_event_count;
}
old_x_min_endstop = x_min_endstop;
#endif
}
} }
} }
else { // +direction else { // +direction
#if !defined COREXY //NOT COREXY
WRITE(X_DIR_PIN,!INVERT_X_DIR);
#endif
count_direction[X_AXIS]=1;
CHECK_ENDSTOPS CHECK_ENDSTOPS
{ {
#if X_MAX_PIN > -1 #ifdef DUAL_X_CARRIAGE
bool x_max_endstop=(READ(X_MAX_PIN) != X_ENDSTOPS_INVERTING); // with 2 x-carriages, endstops are only checked in the homing direction for the active extruder
if(x_max_endstop && old_x_max_endstop && (current_block->steps_x > 0)){ if ((active_extruder == 0 && X_HOME_DIR == 1) || (active_extruder != 0 && X2_HOME_DIR == 1))
endstops_trigsteps[X_AXIS] = count_position[X_AXIS]; #endif
endstop_x_hit=true; {
step_events_completed = current_block->step_event_count; #if defined(X_MAX_PIN) && X_MAX_PIN > -1
} bool x_max_endstop=(READ(X_MAX_PIN) != X_ENDSTOPS_INVERTING);
old_x_max_endstop = x_max_endstop; if(x_max_endstop && old_x_max_endstop && (current_block->steps_x > 0)){
#endif endstops_trigsteps[X_AXIS] = count_position[X_AXIS];
endstop_x_hit=true;
step_events_completed = current_block->step_event_count;
}
old_x_max_endstop = x_max_endstop;
#endif
}
} }
} }
#ifndef COREXY
if ((out_bits & (1<<Y_AXIS)) != 0) { // -direction if ((out_bits & (1<<Y_AXIS)) != 0) { // -direction
#if !defined COREXY //NOT COREXY #else
WRITE(Y_DIR_PIN,INVERT_Y_DIR); if ((((out_bits & (1<<X_AXIS)) != 0)&&(out_bits & (1<<Y_AXIS)) == 0)) { // -Y occurs for -A and +B
#endif #endif
count_direction[Y_AXIS]=-1;
CHECK_ENDSTOPS CHECK_ENDSTOPS
{ {
#if Y_MIN_PIN > -1 #if defined(Y_MIN_PIN) && Y_MIN_PIN > -1
bool y_min_endstop=(READ(Y_MIN_PIN) != Y_ENDSTOPS_INVERTING); bool y_min_endstop=(READ(Y_MIN_PIN) != Y_ENDSTOPS_INVERTING);
if(y_min_endstop && old_y_min_endstop && (current_block->steps_y > 0)) { if(y_min_endstop && old_y_min_endstop && (current_block->steps_y > 0)) {
endstops_trigsteps[Y_AXIS] = count_position[Y_AXIS]; endstops_trigsteps[Y_AXIS] = count_position[Y_AXIS];
@ -403,13 +439,9 @@ ISR(TIMER1_COMPA_vect)
} }
} }
else { // +direction else { // +direction
#if !defined COREXY //NOT COREXY
WRITE(Y_DIR_PIN,!INVERT_Y_DIR);
#endif
count_direction[Y_AXIS]=1;
CHECK_ENDSTOPS CHECK_ENDSTOPS
{ {
#if Y_MAX_PIN > -1 #if defined(Y_MAX_PIN) && Y_MAX_PIN > -1
bool y_max_endstop=(READ(Y_MAX_PIN) != Y_ENDSTOPS_INVERTING); bool y_max_endstop=(READ(Y_MAX_PIN) != Y_ENDSTOPS_INVERTING);
if(y_max_endstop && old_y_max_endstop && (current_block->steps_y > 0)){ if(y_max_endstop && old_y_max_endstop && (current_block->steps_y > 0)){
endstops_trigsteps[Y_AXIS] = count_position[Y_AXIS]; endstops_trigsteps[Y_AXIS] = count_position[Y_AXIS];
@ -420,28 +452,7 @@ ISR(TIMER1_COMPA_vect)
#endif #endif
} }
} }
#ifdef COREXY //coreXY kinematics defined
if((current_block->steps_x >= current_block->steps_y)&&((out_bits & (1<<X_AXIS)) == 0)){ //+X is major axis
WRITE(X_DIR_PIN, !INVERT_X_DIR);
WRITE(Y_DIR_PIN, !INVERT_Y_DIR);
}
if((current_block->steps_x >= current_block->steps_y)&&((out_bits & (1<<X_AXIS)) != 0)){ //-X is major axis
WRITE(X_DIR_PIN, INVERT_X_DIR);
WRITE(Y_DIR_PIN, INVERT_Y_DIR);
}
if((current_block->steps_y > current_block->steps_x)&&((out_bits & (1<<Y_AXIS)) == 0)){ //+Y is major axis
WRITE(X_DIR_PIN, !INVERT_X_DIR);
WRITE(Y_DIR_PIN, INVERT_Y_DIR);
}
if((current_block->steps_y > current_block->steps_x)&&((out_bits & (1<<Y_AXIS)) != 0)){ //-Y is major axis
WRITE(X_DIR_PIN, INVERT_X_DIR);
WRITE(Y_DIR_PIN, !INVERT_Y_DIR);
}
#endif //coreXY
if ((out_bits & (1<<Z_AXIS)) != 0) { // -direction if ((out_bits & (1<<Z_AXIS)) != 0) { // -direction
WRITE(Z_DIR_PIN,INVERT_Z_DIR); WRITE(Z_DIR_PIN,INVERT_Z_DIR);
@ -452,7 +463,7 @@ ISR(TIMER1_COMPA_vect)
count_direction[Z_AXIS]=-1; count_direction[Z_AXIS]=-1;
CHECK_ENDSTOPS CHECK_ENDSTOPS
{ {
#if Z_MIN_PIN > -1 #if defined(Z_MIN_PIN) && Z_MIN_PIN > -1
bool z_min_endstop=(READ(Z_MIN_PIN) != Z_ENDSTOPS_INVERTING); bool z_min_endstop=(READ(Z_MIN_PIN) != Z_ENDSTOPS_INVERTING);
if(z_min_endstop && old_z_min_endstop && (current_block->steps_z > 0)) { if(z_min_endstop && old_z_min_endstop && (current_block->steps_z > 0)) {
endstops_trigsteps[Z_AXIS] = count_position[Z_AXIS]; endstops_trigsteps[Z_AXIS] = count_position[Z_AXIS];
@ -473,7 +484,7 @@ ISR(TIMER1_COMPA_vect)
count_direction[Z_AXIS]=1; count_direction[Z_AXIS]=1;
CHECK_ENDSTOPS CHECK_ENDSTOPS
{ {
#if Z_MAX_PIN > -1 #if defined(Z_MAX_PIN) && Z_MAX_PIN > -1
bool z_max_endstop=(READ(Z_MAX_PIN) != Z_ENDSTOPS_INVERTING); bool z_max_endstop=(READ(Z_MAX_PIN) != Z_ENDSTOPS_INVERTING);
if(z_max_endstop && old_z_max_endstop && (current_block->steps_z > 0)) { if(z_max_endstop && old_z_max_endstop && (current_block->steps_z > 0)) {
endstops_trigsteps[Z_AXIS] = count_position[Z_AXIS]; endstops_trigsteps[Z_AXIS] = count_position[Z_AXIS];
@ -516,13 +527,22 @@ ISR(TIMER1_COMPA_vect)
} }
#endif //ADVANCE #endif //ADVANCE
#if !defined COREXY
counter_x += current_block->steps_x; counter_x += current_block->steps_x;
if (counter_x > 0) { if (counter_x > 0) {
WRITE(X_STEP_PIN, !INVERT_X_STEP_PIN); #ifdef DUAL_X_CARRIAGE
if (active_extruder != 0)
WRITE(X2_STEP_PIN,!INVERT_X_STEP_PIN);
else
#endif
WRITE(X_STEP_PIN, !INVERT_X_STEP_PIN);
counter_x -= current_block->step_event_count; counter_x -= current_block->step_event_count;
count_position[X_AXIS]+=count_direction[X_AXIS]; count_position[X_AXIS]+=count_direction[X_AXIS];
WRITE(X_STEP_PIN, INVERT_X_STEP_PIN); #ifdef DUAL_X_CARRIAGE
if (active_extruder != 0)
WRITE(X2_STEP_PIN,INVERT_X_STEP_PIN);
else
#endif
WRITE(X_STEP_PIN, INVERT_X_STEP_PIN);
} }
counter_y += current_block->steps_y; counter_y += current_block->steps_y;
@ -532,56 +552,7 @@ ISR(TIMER1_COMPA_vect)
count_position[Y_AXIS]+=count_direction[Y_AXIS]; count_position[Y_AXIS]+=count_direction[Y_AXIS];
WRITE(Y_STEP_PIN, INVERT_Y_STEP_PIN); WRITE(Y_STEP_PIN, INVERT_Y_STEP_PIN);
} }
#endif
#ifdef COREXY
counter_x += current_block->steps_x;
counter_y += current_block->steps_y;
if ((counter_x > 0)&&!(counter_y>0)){ //X step only
WRITE(X_STEP_PIN, !INVERT_X_STEP_PIN);
WRITE(Y_STEP_PIN, !INVERT_Y_STEP_PIN);
counter_x -= current_block->step_event_count;
count_position[X_AXIS]+=count_direction[X_AXIS];
WRITE(X_STEP_PIN, INVERT_X_STEP_PIN);
WRITE(Y_STEP_PIN, INVERT_Y_STEP_PIN);
}
if (!(counter_x > 0)&&(counter_y>0)){ //Y step only
WRITE(X_STEP_PIN, !INVERT_X_STEP_PIN);
WRITE(Y_STEP_PIN, !INVERT_Y_STEP_PIN);
counter_y -= current_block->step_event_count;
count_position[Y_AXIS]+=count_direction[Y_AXIS];
WRITE(X_STEP_PIN, INVERT_X_STEP_PIN);
WRITE(Y_STEP_PIN, INVERT_Y_STEP_PIN);
}
if ((counter_x > 0)&&(counter_y>0)){ //step in both axes
if (((out_bits & (1<<X_AXIS)) == 0)^((out_bits & (1<<Y_AXIS)) == 0)){ //X and Y in different directions
WRITE(Y_STEP_PIN, !INVERT_Y_STEP_PIN);
counter_x -= current_block->step_event_count;
WRITE(Y_STEP_PIN, INVERT_Y_STEP_PIN);
step_wait();
count_position[X_AXIS]+=count_direction[X_AXIS];
count_position[Y_AXIS]+=count_direction[Y_AXIS];
WRITE(Y_STEP_PIN, !INVERT_Y_STEP_PIN);
counter_y -= current_block->step_event_count;
WRITE(Y_STEP_PIN, INVERT_Y_STEP_PIN);
}
else{ //X and Y in same direction
WRITE(X_STEP_PIN, !INVERT_X_STEP_PIN);
counter_x -= current_block->step_event_count;
WRITE(X_STEP_PIN, INVERT_X_STEP_PIN) ;
step_wait();
count_position[X_AXIS]+=count_direction[X_AXIS];
count_position[Y_AXIS]+=count_direction[Y_AXIS];
WRITE(X_STEP_PIN, !INVERT_X_STEP_PIN);
counter_y -= current_block->step_event_count;
WRITE(X_STEP_PIN, INVERT_X_STEP_PIN);
}
}
#endif //corexy
counter_z += current_block->steps_z; counter_z += current_block->steps_z;
if (counter_z > 0) { if (counter_z > 0) {
WRITE(Z_STEP_PIN, !INVERT_Z_STEP_PIN); WRITE(Z_STEP_PIN, !INVERT_Z_STEP_PIN);
@ -743,20 +714,23 @@ void st_init()
microstep_init(); //Initialize Microstepping Pins microstep_init(); //Initialize Microstepping Pins
//Initialize Dir Pins //Initialize Dir Pins
#if X_DIR_PIN > -1 #if defined(X_DIR_PIN) && X_DIR_PIN > -1
SET_OUTPUT(X_DIR_PIN); SET_OUTPUT(X_DIR_PIN);
#endif #endif
#if Y_DIR_PIN > -1 #if defined(X2_DIR_PIN) && X2_DIR_PIN > -1
SET_OUTPUT(X2_DIR_PIN);
#endif
#if defined(Y_DIR_PIN) && Y_DIR_PIN > -1
SET_OUTPUT(Y_DIR_PIN); SET_OUTPUT(Y_DIR_PIN);
#endif #endif
#if Z_DIR_PIN > -1 #if defined(Z_DIR_PIN) && Z_DIR_PIN > -1
SET_OUTPUT(Z_DIR_PIN); SET_OUTPUT(Z_DIR_PIN);
#if defined(Z_DUAL_STEPPER_DRIVERS) && (Z2_DIR_PIN > -1) #if defined(Z_DUAL_STEPPER_DRIVERS) && defined(Z2_DIR_PIN) && (Z2_DIR_PIN > -1)
SET_OUTPUT(Z2_DIR_PIN); SET_OUTPUT(Z2_DIR_PIN);
#endif #endif
#endif #endif
#if E0_DIR_PIN > -1 #if defined(E0_DIR_PIN) && E0_DIR_PIN > -1
SET_OUTPUT(E0_DIR_PIN); SET_OUTPUT(E0_DIR_PIN);
#endif #endif
#if defined(E1_DIR_PIN) && (E1_DIR_PIN > -1) #if defined(E1_DIR_PIN) && (E1_DIR_PIN > -1)
@ -768,24 +742,28 @@ void st_init()
//Initialize Enable Pins - steppers default to disabled. //Initialize Enable Pins - steppers default to disabled.
#if (X_ENABLE_PIN > -1) #if defined(X_ENABLE_PIN) && X_ENABLE_PIN > -1
SET_OUTPUT(X_ENABLE_PIN); SET_OUTPUT(X_ENABLE_PIN);
if(!X_ENABLE_ON) WRITE(X_ENABLE_PIN,HIGH); if(!X_ENABLE_ON) WRITE(X_ENABLE_PIN,HIGH);
#endif #endif
#if (Y_ENABLE_PIN > -1) #if defined(X2_ENABLE_PIN) && X2_ENABLE_PIN > -1
SET_OUTPUT(X2_ENABLE_PIN);
if(!X_ENABLE_ON) WRITE(X2_ENABLE_PIN,HIGH);
#endif
#if defined(Y_ENABLE_PIN) && Y_ENABLE_PIN > -1
SET_OUTPUT(Y_ENABLE_PIN); SET_OUTPUT(Y_ENABLE_PIN);
if(!Y_ENABLE_ON) WRITE(Y_ENABLE_PIN,HIGH); if(!Y_ENABLE_ON) WRITE(Y_ENABLE_PIN,HIGH);
#endif #endif
#if (Z_ENABLE_PIN > -1) #if defined(Z_ENABLE_PIN) && Z_ENABLE_PIN > -1
SET_OUTPUT(Z_ENABLE_PIN); SET_OUTPUT(Z_ENABLE_PIN);
if(!Z_ENABLE_ON) WRITE(Z_ENABLE_PIN,HIGH); if(!Z_ENABLE_ON) WRITE(Z_ENABLE_PIN,HIGH);
#if defined(Z_DUAL_STEPPER_DRIVERS) && (Z2_ENABLE_PIN > -1) #if defined(Z_DUAL_STEPPER_DRIVERS) && defined(Z2_ENABLE_PIN) && (Z2_ENABLE_PIN > -1)
SET_OUTPUT(Z2_ENABLE_PIN); SET_OUTPUT(Z2_ENABLE_PIN);
if(!Z_ENABLE_ON) WRITE(Z2_ENABLE_PIN,HIGH); if(!Z_ENABLE_ON) WRITE(Z2_ENABLE_PIN,HIGH);
#endif #endif
#endif #endif
#if (E0_ENABLE_PIN > -1) #if defined(E0_ENABLE_PIN) && (E0_ENABLE_PIN > -1)
SET_OUTPUT(E0_ENABLE_PIN); SET_OUTPUT(E0_ENABLE_PIN);
if(!E_ENABLE_ON) WRITE(E0_ENABLE_PIN,HIGH); if(!E_ENABLE_ON) WRITE(E0_ENABLE_PIN,HIGH);
#endif #endif
@ -800,42 +778,42 @@ void st_init()
//endstops and pullups //endstops and pullups
#if X_MIN_PIN > -1 #if defined(X_MIN_PIN) && X_MIN_PIN > -1
SET_INPUT(X_MIN_PIN); SET_INPUT(X_MIN_PIN);
#ifdef ENDSTOPPULLUP_XMIN #ifdef ENDSTOPPULLUP_XMIN
WRITE(X_MIN_PIN,HIGH); WRITE(X_MIN_PIN,HIGH);
#endif #endif
#endif #endif
#if Y_MIN_PIN > -1 #if defined(Y_MIN_PIN) && Y_MIN_PIN > -1
SET_INPUT(Y_MIN_PIN); SET_INPUT(Y_MIN_PIN);
#ifdef ENDSTOPPULLUP_YMIN #ifdef ENDSTOPPULLUP_YMIN
WRITE(Y_MIN_PIN,HIGH); WRITE(Y_MIN_PIN,HIGH);
#endif #endif
#endif #endif
#if Z_MIN_PIN > -1 #if defined(Z_MIN_PIN) && Z_MIN_PIN > -1
SET_INPUT(Z_MIN_PIN); SET_INPUT(Z_MIN_PIN);
#ifdef ENDSTOPPULLUP_ZMIN #ifdef ENDSTOPPULLUP_ZMIN
WRITE(Z_MIN_PIN,HIGH); WRITE(Z_MIN_PIN,HIGH);
#endif #endif
#endif #endif
#if X_MAX_PIN > -1 #if defined(X_MAX_PIN) && X_MAX_PIN > -1
SET_INPUT(X_MAX_PIN); SET_INPUT(X_MAX_PIN);
#ifdef ENDSTOPPULLUP_XMAX #ifdef ENDSTOPPULLUP_XMAX
WRITE(X_MAX_PIN,HIGH); WRITE(X_MAX_PIN,HIGH);
#endif #endif
#endif #endif
#if Y_MAX_PIN > -1 #if defined(Y_MAX_PIN) && Y_MAX_PIN > -1
SET_INPUT(Y_MAX_PIN); SET_INPUT(Y_MAX_PIN);
#ifdef ENDSTOPPULLUP_YMAX #ifdef ENDSTOPPULLUP_YMAX
WRITE(Y_MAX_PIN,HIGH); WRITE(Y_MAX_PIN,HIGH);
#endif #endif
#endif #endif
#if Z_MAX_PIN > -1 #if defined(Z_MAX_PIN) && Z_MAX_PIN > -1
SET_INPUT(Z_MAX_PIN); SET_INPUT(Z_MAX_PIN);
#ifdef ENDSTOPPULLUP_ZMAX #ifdef ENDSTOPPULLUP_ZMAX
WRITE(Z_MAX_PIN,HIGH); WRITE(Z_MAX_PIN,HIGH);
@ -844,26 +822,31 @@ void st_init()
//Initialize Step Pins //Initialize Step Pins
#if (X_STEP_PIN > -1) #if defined(X_STEP_PIN) && (X_STEP_PIN > -1)
SET_OUTPUT(X_STEP_PIN); SET_OUTPUT(X_STEP_PIN);
WRITE(X_STEP_PIN,INVERT_X_STEP_PIN); WRITE(X_STEP_PIN,INVERT_X_STEP_PIN);
disable_x(); disable_x();
#endif #endif
#if (Y_STEP_PIN > -1) #if defined(X2_STEP_PIN) && (X2_STEP_PIN > -1)
SET_OUTPUT(X2_STEP_PIN);
WRITE(X2_STEP_PIN,INVERT_X_STEP_PIN);
disable_x();
#endif
#if defined(Y_STEP_PIN) && (Y_STEP_PIN > -1)
SET_OUTPUT(Y_STEP_PIN); SET_OUTPUT(Y_STEP_PIN);
WRITE(Y_STEP_PIN,INVERT_Y_STEP_PIN); WRITE(Y_STEP_PIN,INVERT_Y_STEP_PIN);
disable_y(); disable_y();
#endif #endif
#if (Z_STEP_PIN > -1) #if defined(Z_STEP_PIN) && (Z_STEP_PIN > -1)
SET_OUTPUT(Z_STEP_PIN); SET_OUTPUT(Z_STEP_PIN);
WRITE(Z_STEP_PIN,INVERT_Z_STEP_PIN); WRITE(Z_STEP_PIN,INVERT_Z_STEP_PIN);
#if defined(Z_DUAL_STEPPER_DRIVERS) && (Z2_STEP_PIN > -1) #if defined(Z_DUAL_STEPPER_DRIVERS) && defined(Z2_STEP_PIN) && (Z2_STEP_PIN > -1)
SET_OUTPUT(Z2_STEP_PIN); SET_OUTPUT(Z2_STEP_PIN);
WRITE(Z2_STEP_PIN,INVERT_Z_STEP_PIN); WRITE(Z2_STEP_PIN,INVERT_Z_STEP_PIN);
#endif #endif
disable_z(); disable_z();
#endif #endif
#if (E0_STEP_PIN > -1) #if defined(E0_STEP_PIN) && (E0_STEP_PIN > -1)
SET_OUTPUT(E0_STEP_PIN); SET_OUTPUT(E0_STEP_PIN);
WRITE(E0_STEP_PIN,INVERT_E_STEP_PIN); WRITE(E0_STEP_PIN,INVERT_E_STEP_PIN);
disable_e0(); disable_e0();
@ -879,10 +862,6 @@ void st_init()
disable_e2(); disable_e2();
#endif #endif
#ifdef CONTROLLERFAN_PIN
SET_OUTPUT(CONTROLLERFAN_PIN); //Set pin used for driver cooling fan
#endif
// waveform generation = 0100 = CTC // waveform generation = 0100 = CTC
TCCR1B &= ~(1<<WGM13); TCCR1B &= ~(1<<WGM13);
TCCR1B |= (1<<WGM12); TCCR1B |= (1<<WGM12);
@ -978,7 +957,7 @@ void quickStop()
void digitalPotWrite(int address, int value) // From Arduino DigitalPotControl example void digitalPotWrite(int address, int value) // From Arduino DigitalPotControl example
{ {
#if DIGIPOTSS_PIN > -1 #if defined(DIGIPOTSS_PIN) && DIGIPOTSS_PIN > -1
digitalWrite(DIGIPOTSS_PIN,LOW); // take the SS pin low to select the chip digitalWrite(DIGIPOTSS_PIN,LOW); // take the SS pin low to select the chip
SPI.transfer(address); // send in the address and value via SPI: SPI.transfer(address); // send in the address and value via SPI:
SPI.transfer(value); SPI.transfer(value);
@ -989,7 +968,7 @@ void digitalPotWrite(int address, int value) // From Arduino DigitalPotControl e
void digipot_init() //Initialize Digipot Motor Current void digipot_init() //Initialize Digipot Motor Current
{ {
#if DIGIPOTSS_PIN > -1 #if defined(DIGIPOTSS_PIN) && DIGIPOTSS_PIN > -1
const uint8_t digipot_motor_current[] = DIGIPOT_MOTOR_CURRENT; const uint8_t digipot_motor_current[] = DIGIPOT_MOTOR_CURRENT;
SPI.begin(); SPI.begin();
@ -1002,7 +981,7 @@ void digipot_init() //Initialize Digipot Motor Current
void digipot_current(uint8_t driver, int current) void digipot_current(uint8_t driver, int current)
{ {
#if DIGIPOTSS_PIN > -1 #if defined(DIGIPOTSS_PIN) && DIGIPOTSS_PIN > -1
const uint8_t digipot_ch[] = DIGIPOT_CHANNELS; const uint8_t digipot_ch[] = DIGIPOT_CHANNELS;
digitalPotWrite(digipot_ch[driver], current); digitalPotWrite(digipot_ch[driver], current);
#endif #endif
@ -1010,7 +989,7 @@ void digipot_current(uint8_t driver, int current)
void microstep_init() void microstep_init()
{ {
#if X_MS1_PIN > -1 #if defined(X_MS1_PIN) && X_MS1_PIN > -1
const uint8_t microstep_modes[] = MICROSTEP_MODES; const uint8_t microstep_modes[] = MICROSTEP_MODES;
pinMode(X_MS2_PIN,OUTPUT); pinMode(X_MS2_PIN,OUTPUT);
pinMode(Y_MS2_PIN,OUTPUT); pinMode(Y_MS2_PIN,OUTPUT);

295
Marlin/temperature.cpp
View file

@ -40,10 +40,13 @@
int target_temperature[EXTRUDERS] = { 0 }; int target_temperature[EXTRUDERS] = { 0 };
int target_temperature_bed = 0; int target_temperature_bed = 0;
int current_temperature_raw[EXTRUDERS] = { 0 }; int current_temperature_raw[EXTRUDERS] = { 0 };
float current_temperature[EXTRUDERS] = { 0 }; float current_temperature[EXTRUDERS] = { 0.0 };
int current_temperature_bed_raw = 0; int current_temperature_bed_raw = 0;
float current_temperature_bed = 0; float current_temperature_bed = 0.0;
#ifdef TEMP_SENSOR_1_AS_REDUNDANT
int redundant_temperature_raw = 0;
float redundant_temperature = 0.0;
#endif
#ifdef PIDTEMP #ifdef PIDTEMP
float Kp=DEFAULT_Kp; float Kp=DEFAULT_Kp;
float Ki=(DEFAULT_Ki*PID_dT); float Ki=(DEFAULT_Ki*PID_dT);
@ -59,6 +62,9 @@ float current_temperature_bed = 0;
float bedKd=(DEFAULT_bedKd/PID_dT); float bedKd=(DEFAULT_bedKd/PID_dT);
#endif //PIDTEMPBED #endif //PIDTEMPBED
#ifdef FAN_SOFT_PWM
unsigned char fanSpeedSoftPwm;
#endif
//=========================================================================== //===========================================================================
//=============================private variables============================ //=============================private variables============================
@ -99,17 +105,20 @@ static volatile bool temp_meas_ready = false;
#ifdef FAN_SOFT_PWM #ifdef FAN_SOFT_PWM
static unsigned char soft_pwm_fan; static unsigned char soft_pwm_fan;
#endif #endif
#if (defined(EXTRUDER_0_AUTO_FAN_PIN) && EXTRUDER_0_AUTO_FAN_PIN > -1) || \
(defined(EXTRUDER_1_AUTO_FAN_PIN) && EXTRUDER_1_AUTO_FAN_PIN > -1) || \
(defined(EXTRUDER_2_AUTO_FAN_PIN) && EXTRUDER_2_AUTO_FAN_PIN > -1)
static unsigned long extruder_autofan_last_check;
#endif
#if EXTRUDERS > 3 #if EXTRUDERS > 3
# error Unsupported number of extruders # error Unsupported number of extruders
#elif EXTRUDERS > 2 #elif EXTRUDERS > 2
# define ARRAY_BY_EXTRUDERS(v1, v2, v3) { v1, v2, v3 } # define ARRAY_BY_EXTRUDERS(v1, v2, v3) { v1, v2, v3 }
#elif EXTRUDERS > 1 #elif EXTRUDERS > 1
# define ARRAY_BY_EXTRUDERS(v1, v2, v3) { v1, v2 } # define ARRAY_BY_EXTRUDERS(v1, v2, v3) { v1, v2 }
#else #else
# define ARRAY_BY_EXTRUDERS(v1, v2, v3) { v1 } # define ARRAY_BY_EXTRUDERS(v1, v2, v3) { v1 }
#endif #endif
// Init min and max temp with extreme values to prevent false errors during startup // Init min and max temp with extreme values to prevent false errors during startup
@ -121,8 +130,14 @@ static int maxttemp[EXTRUDERS] = ARRAY_BY_EXTRUDERS( 16383, 16383, 16383 );
#ifdef BED_MAXTEMP #ifdef BED_MAXTEMP
static int bed_maxttemp_raw = HEATER_BED_RAW_HI_TEMP; static int bed_maxttemp_raw = HEATER_BED_RAW_HI_TEMP;
#endif #endif
static void *heater_ttbl_map[EXTRUDERS] = ARRAY_BY_EXTRUDERS( (void *)HEATER_0_TEMPTABLE, (void *)HEATER_1_TEMPTABLE, (void *)HEATER_2_TEMPTABLE );
static uint8_t heater_ttbllen_map[EXTRUDERS] = ARRAY_BY_EXTRUDERS( HEATER_0_TEMPTABLE_LEN, HEATER_1_TEMPTABLE_LEN, HEATER_2_TEMPTABLE_LEN ); #ifdef TEMP_SENSOR_1_AS_REDUNDANT
static void *heater_ttbl_map[2] = {(void *)HEATER_0_TEMPTABLE, (void *)HEATER_1_TEMPTABLE };
static uint8_t heater_ttbllen_map[2] = { HEATER_0_TEMPTABLE_LEN, HEATER_1_TEMPTABLE_LEN };
#else
static void *heater_ttbl_map[EXTRUDERS] = ARRAY_BY_EXTRUDERS( (void *)HEATER_0_TEMPTABLE, (void *)HEATER_1_TEMPTABLE, (void *)HEATER_2_TEMPTABLE );
static uint8_t heater_ttbllen_map[EXTRUDERS] = ARRAY_BY_EXTRUDERS( HEATER_0_TEMPTABLE_LEN, HEATER_1_TEMPTABLE_LEN, HEATER_2_TEMPTABLE_LEN );
#endif
static float analog2temp(int raw, uint8_t e); static float analog2temp(int raw, uint8_t e);
static float analog2tempBed(int raw); static float analog2tempBed(int raw);
@ -133,6 +148,10 @@ int watch_start_temp[EXTRUDERS] = ARRAY_BY_EXTRUDERS(0,0,0);
unsigned long watchmillis[EXTRUDERS] = ARRAY_BY_EXTRUDERS(0,0,0); unsigned long watchmillis[EXTRUDERS] = ARRAY_BY_EXTRUDERS(0,0,0);
#endif //WATCH_TEMP_PERIOD #endif //WATCH_TEMP_PERIOD
#ifndef SOFT_PWM_SCALE
#define SOFT_PWM_SCALE 0
#endif
//=========================================================================== //===========================================================================
//============================= functions ============================ //============================= functions ============================
//=========================================================================== //===========================================================================
@ -154,28 +173,28 @@ void PID_autotune(float temp, int extruder, int ncycles)
float Kp, Ki, Kd; float Kp, Ki, Kd;
float max = 0, min = 10000; float max = 0, min = 10000;
if ((extruder > EXTRUDERS) if ((extruder > EXTRUDERS)
#if (TEMP_BED_PIN <= -1) #if (TEMP_BED_PIN <= -1)
||(extruder < 0) ||(extruder < 0)
#endif #endif
){ ){
SERIAL_ECHOLN("PID Autotune failed. Bad extruder number."); SERIAL_ECHOLN("PID Autotune failed. Bad extruder number.");
return; return;
} }
SERIAL_ECHOLN("PID Autotune start"); SERIAL_ECHOLN("PID Autotune start");
disable_heater(); // switch off all heaters. disable_heater(); // switch off all heaters.
if (extruder<0) if (extruder<0)
{ {
soft_pwm_bed = (MAX_BED_POWER)/2; soft_pwm_bed = (MAX_BED_POWER)/2;
bias = d = (MAX_BED_POWER)/2; bias = d = (MAX_BED_POWER)/2;
} }
else else
{ {
soft_pwm[extruder] = (PID_MAX)/2; soft_pwm[extruder] = (PID_MAX)/2;
bias = d = (PID_MAX)/2; bias = d = (PID_MAX)/2;
} }
@ -193,10 +212,10 @@ void PID_autotune(float temp, int extruder, int ncycles)
if(heating == true && input > temp) { if(heating == true && input > temp) {
if(millis() - t2 > 5000) { if(millis() - t2 > 5000) {
heating=false; heating=false;
if (extruder<0) if (extruder<0)
soft_pwm_bed = (bias - d) >> 1; soft_pwm_bed = (bias - d) >> 1;
else else
soft_pwm[extruder] = (bias - d) >> 1; soft_pwm[extruder] = (bias - d) >> 1;
t1=millis(); t1=millis();
t_high=t1 - t2; t_high=t1 - t2;
max=temp; max=temp;
@ -247,28 +266,28 @@ void PID_autotune(float temp, int extruder, int ncycles)
*/ */
} }
} }
if (extruder<0) if (extruder<0)
soft_pwm_bed = (bias + d) >> 1; soft_pwm_bed = (bias + d) >> 1;
else else
soft_pwm[extruder] = (bias + d) >> 1; soft_pwm[extruder] = (bias + d) >> 1;
cycles++; cycles++;
min=temp; min=temp;
} }
} }
} }
if(input > (temp + 20)) { if(input > (temp + 20)) {
SERIAL_PROTOCOLLNPGM("PID Autotune failed! Temperature to high"); SERIAL_PROTOCOLLNPGM("PID Autotune failed! Temperature too high");
return; return;
} }
if(millis() - temp_millis > 2000) { if(millis() - temp_millis > 2000) {
int p; int p;
if (extruder<0){ if (extruder<0){
p=soft_pwm_bed; p=soft_pwm_bed;
SERIAL_PROTOCOLPGM("ok B:"); SERIAL_PROTOCOLPGM("ok B:");
}else{ }else{
p=soft_pwm[extruder]; p=soft_pwm[extruder];
SERIAL_PROTOCOLPGM("ok T:"); SERIAL_PROTOCOLPGM("ok T:");
} }
SERIAL_PROTOCOL(input); SERIAL_PROTOCOL(input);
SERIAL_PROTOCOLPGM(" @:"); SERIAL_PROTOCOLPGM(" @:");
@ -281,7 +300,7 @@ void PID_autotune(float temp, int extruder, int ncycles)
return; return;
} }
if(cycles > ncycles) { if(cycles > ncycles) {
SERIAL_PROTOCOLLNPGM("PID Autotune finished ! Place the Kp, Ki and Kd constants in the configuration.h"); SERIAL_PROTOCOLLNPGM("PID Autotune finished! Put the Kp, Ki and Kd constants into Configuration.h");
return; return;
} }
lcd_update(); lcd_update();
@ -306,6 +325,78 @@ int getHeaterPower(int heater) {
return soft_pwm[heater]; return soft_pwm[heater];
} }
#if (defined(EXTRUDER_0_AUTO_FAN_PIN) && EXTRUDER_0_AUTO_FAN_PIN > -1) || \
(defined(EXTRUDER_1_AUTO_FAN_PIN) && EXTRUDER_1_AUTO_FAN_PIN > -1) || \
(defined(EXTRUDER_2_AUTO_FAN_PIN) && EXTRUDER_2_AUTO_FAN_PIN > -1)
#if defined(FAN_PIN) && FAN_PIN > -1
#if EXTRUDER_0_AUTO_FAN_PIN == FAN_PIN
#error "You cannot set EXTRUDER_0_AUTO_FAN_PIN equal to FAN_PIN"
#endif
#if EXTRUDER_1_AUTO_FAN_PIN == FAN_PIN
#error "You cannot set EXTRUDER_1_AUTO_FAN_PIN equal to FAN_PIN"
#endif
#if EXTRUDER_2_AUTO_FAN_PIN == FAN_PIN
#error "You cannot set EXTRUDER_2_AUTO_FAN_PIN equal to FAN_PIN"
#endif
#endif
void setExtruderAutoFanState(int pin, bool state)
{
unsigned char newFanSpeed = (state != 0) ? EXTRUDER_AUTO_FAN_SPEED : 0;
// this idiom allows both digital and PWM fan outputs (see M42 handling).
pinMode(pin, OUTPUT);
digitalWrite(pin, newFanSpeed);
analogWrite(pin, newFanSpeed);
}
void checkExtruderAutoFans()
{
uint8_t fanState = 0;
// which fan pins need to be turned on?
#if defined(EXTRUDER_0_AUTO_FAN_PIN) && EXTRUDER_0_AUTO_FAN_PIN > -1
if (current_temperature[0] > EXTRUDER_AUTO_FAN_TEMPERATURE)
fanState |= 1;
#endif
#if defined(EXTRUDER_1_AUTO_FAN_PIN) && EXTRUDER_1_AUTO_FAN_PIN > -1
if (current_temperature[1] > EXTRUDER_AUTO_FAN_TEMPERATURE)
{
if (EXTRUDER_1_AUTO_FAN_PIN == EXTRUDER_0_AUTO_FAN_PIN)
fanState |= 1;
else
fanState |= 2;
}
#endif
#if defined(EXTRUDER_2_AUTO_FAN_PIN) && EXTRUDER_2_AUTO_FAN_PIN > -1
if (current_temperature[2] > EXTRUDER_AUTO_FAN_TEMPERATURE)
{
if (EXTRUDER_2_AUTO_FAN_PIN == EXTRUDER_0_AUTO_FAN_PIN)
fanState |= 1;
else if (EXTRUDER_2_AUTO_FAN_PIN == EXTRUDER_1_AUTO_FAN_PIN)
fanState |= 2;
else
fanState |= 4;
}
#endif
// update extruder auto fan states
#if defined(EXTRUDER_0_AUTO_FAN_PIN) && EXTRUDER_0_AUTO_FAN_PIN > -1
setExtruderAutoFanState(EXTRUDER_0_AUTO_FAN_PIN, (fanState & 1) != 0);
#endif
#if defined(EXTRUDER_1_AUTO_FAN_PIN) && EXTRUDER_1_AUTO_FAN_PIN > -1
if (EXTRUDER_1_AUTO_FAN_PIN != EXTRUDER_0_AUTO_FAN_PIN)
setExtruderAutoFanState(EXTRUDER_1_AUTO_FAN_PIN, (fanState & 2) != 0);
#endif
#if defined(EXTRUDER_2_AUTO_FAN_PIN) && EXTRUDER_2_AUTO_FAN_PIN > -1
if (EXTRUDER_2_AUTO_FAN_PIN != EXTRUDER_0_AUTO_FAN_PIN
&& EXTRUDER_2_AUTO_FAN_PIN != EXTRUDER_1_AUTO_FAN_PIN)
setExtruderAutoFanState(EXTRUDER_2_AUTO_FAN_PIN, (fanState & 4) != 0);
#endif
}
#endif // any extruder auto fan pins set
void manage_heater() void manage_heater()
{ {
float pid_input; float pid_input;
@ -396,10 +487,31 @@ void manage_heater()
} }
} }
#endif #endif
#ifdef TEMP_SENSOR_1_AS_REDUNDANT
if(fabs(current_temperature[0] - redundant_temperature) > MAX_REDUNDANT_TEMP_SENSOR_DIFF) {
disable_heater();
if(IsStopped() == false) {
SERIAL_ERROR_START;
SERIAL_ERRORLNPGM("Extruder switched off. Temperature difference between temp sensors is too high !");
LCD_ALERTMESSAGEPGM("Err: REDUNDANT TEMP ERROR");
}
#ifndef BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE
Stop();
#endif
}
#endif
} // End extruder for loop } // End extruder for loop
#if (defined(EXTRUDER_0_AUTO_FAN_PIN) && EXTRUDER_0_AUTO_FAN_PIN > -1) || \
(defined(EXTRUDER_1_AUTO_FAN_PIN) && EXTRUDER_1_AUTO_FAN_PIN > -1) || \
(defined(EXTRUDER_2_AUTO_FAN_PIN) && EXTRUDER_2_AUTO_FAN_PIN > -1)
if(millis() - extruder_autofan_last_check > 2500) // only need to check fan state very infrequently
{
checkExtruderAutoFans();
extruder_autofan_last_check = millis();
}
#endif
#ifndef PIDTEMPBED #ifndef PIDTEMPBED
if(millis() - previous_millis_bed_heater < BED_CHECK_INTERVAL) if(millis() - previous_millis_bed_heater < BED_CHECK_INTERVAL)
return; return;
@ -481,7 +593,11 @@ void manage_heater()
// Derived from RepRap FiveD extruder::getTemperature() // Derived from RepRap FiveD extruder::getTemperature()
// For hot end temperature measurement. // For hot end temperature measurement.
static float analog2temp(int raw, uint8_t e) { static float analog2temp(int raw, uint8_t e) {
#ifdef TEMP_SENSOR_1_AS_REDUNDANT
if(e > EXTRUDERS)
#else
if(e >= EXTRUDERS) if(e >= EXTRUDERS)
#endif
{ {
SERIAL_ERROR_START; SERIAL_ERROR_START;
SERIAL_ERROR((int)e); SERIAL_ERROR((int)e);
@ -560,7 +676,9 @@ static void updateTemperaturesFromRawValues()
current_temperature[e] = analog2temp(current_temperature_raw[e], e); current_temperature[e] = analog2temp(current_temperature_raw[e], e);
} }
current_temperature_bed = analog2tempBed(current_temperature_bed_raw); current_temperature_bed = analog2tempBed(current_temperature_bed_raw);
#ifdef TEMP_SENSOR_1_AS_REDUNDANT
redundant_temperature = analog2temp(redundant_temperature_raw, 1);
#endif
//Reset the watchdog after we know we have a temperature measurement. //Reset the watchdog after we know we have a temperature measurement.
watchdog_reset(); watchdog_reset();
@ -571,6 +689,12 @@ static void updateTemperaturesFromRawValues()
void tp_init() void tp_init()
{ {
#if (MOTHERBOARD == 80) && ((TEMP_SENSOR_0==-1)||(TEMP_SENSOR_1==-1)||(TEMP_SENSOR_2==-1)||(TEMP_SENSOR_BED==-1))
//disable RUMBA JTAG in case the thermocouple extension is plugged on top of JTAG connector
MCUCR=(1<<JTD);
MCUCR=(1<<JTD);
#endif
// Finish init of mult extruder arrays // Finish init of mult extruder arrays
for(int e = 0; e < EXTRUDERS; e++) { for(int e = 0; e < EXTRUDERS; e++) {
// populate with the first value // populate with the first value
@ -585,26 +709,26 @@ void tp_init()
#endif //PIDTEMPBED #endif //PIDTEMPBED
} }
#if (HEATER_0_PIN > -1) #if defined(HEATER_0_PIN) && (HEATER_0_PIN > -1)
SET_OUTPUT(HEATER_0_PIN); SET_OUTPUT(HEATER_0_PIN);
#endif #endif
#if (HEATER_1_PIN > -1) #if defined(HEATER_1_PIN) && (HEATER_1_PIN > -1)
SET_OUTPUT(HEATER_1_PIN); SET_OUTPUT(HEATER_1_PIN);
#endif #endif
#if (HEATER_2_PIN > -1) #if defined(HEATER_2_PIN) && (HEATER_2_PIN > -1)
SET_OUTPUT(HEATER_2_PIN); SET_OUTPUT(HEATER_2_PIN);
#endif #endif
#if (HEATER_BED_PIN > -1) #if defined(HEATER_BED_PIN) && (HEATER_BED_PIN > -1)
SET_OUTPUT(HEATER_BED_PIN); SET_OUTPUT(HEATER_BED_PIN);
#endif #endif
#if (FAN_PIN > -1) #if defined(FAN_PIN) && (FAN_PIN > -1)
SET_OUTPUT(FAN_PIN); SET_OUTPUT(FAN_PIN);
#ifdef FAST_PWM_FAN #ifdef FAST_PWM_FAN
setPwmFrequency(FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8 setPwmFrequency(FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8
#endif #endif
#ifdef FAN_SOFT_PWM #ifdef FAN_SOFT_PWM
soft_pwm_fan=(unsigned char)fanSpeed; soft_pwm_fan = fanSpeedSoftPwm / 2;
#endif #endif
#endif #endif
#ifdef HEATER_0_USES_MAX6675 #ifdef HEATER_0_USES_MAX6675
@ -629,28 +753,28 @@ void tp_init()
#ifdef DIDR2 #ifdef DIDR2
DIDR2 = 0; DIDR2 = 0;
#endif #endif
#if (TEMP_0_PIN > -1) #if defined(TEMP_0_PIN) && (TEMP_0_PIN > -1)
#if TEMP_0_PIN < 8 #if TEMP_0_PIN < 8
DIDR0 |= 1 << TEMP_0_PIN; DIDR0 |= 1 << TEMP_0_PIN;
#else #else
DIDR2 |= 1<<(TEMP_0_PIN - 8); DIDR2 |= 1<<(TEMP_0_PIN - 8);
#endif #endif
#endif #endif
#if (TEMP_1_PIN > -1) #if defined(TEMP_1_PIN) && (TEMP_1_PIN > -1)
#if TEMP_1_PIN < 8 #if TEMP_1_PIN < 8
DIDR0 |= 1<<TEMP_1_PIN; DIDR0 |= 1<<TEMP_1_PIN;
#else #else
DIDR2 |= 1<<(TEMP_1_PIN - 8); DIDR2 |= 1<<(TEMP_1_PIN - 8);
#endif #endif
#endif #endif
#if (TEMP_2_PIN > -1) #if defined(TEMP_2_PIN) && (TEMP_2_PIN > -1)
#if TEMP_2_PIN < 8 #if TEMP_2_PIN < 8
DIDR0 |= 1 << TEMP_2_PIN; DIDR0 |= 1 << TEMP_2_PIN;
#else #else
DIDR2 = 1<<(TEMP_2_PIN - 8); DIDR2 |= 1<<(TEMP_2_PIN - 8);
#endif #endif
#endif #endif
#if (TEMP_BED_PIN > -1) #if defined(TEMP_BED_PIN) && (TEMP_BED_PIN > -1)
#if TEMP_BED_PIN < 8 #if TEMP_BED_PIN < 8
DIDR0 |= 1<<TEMP_BED_PIN; DIDR0 |= 1<<TEMP_BED_PIN;
#else #else
@ -689,7 +813,7 @@ void tp_init()
#if (EXTRUDERS > 1) && defined(HEATER_1_MINTEMP) #if (EXTRUDERS > 1) && defined(HEATER_1_MINTEMP)
minttemp[1] = HEATER_1_MINTEMP; minttemp[1] = HEATER_1_MINTEMP;
while(analog2temp(minttemp_raw[1], 1) > HEATER_1_MINTEMP) { while(analog2temp(minttemp_raw[1], 1) < HEATER_1_MINTEMP) {
#if HEATER_1_RAW_LO_TEMP < HEATER_1_RAW_HI_TEMP #if HEATER_1_RAW_LO_TEMP < HEATER_1_RAW_HI_TEMP
minttemp_raw[1] += OVERSAMPLENR; minttemp_raw[1] += OVERSAMPLENR;
#else #else
@ -710,7 +834,7 @@ void tp_init()
#if (EXTRUDERS > 2) && defined(HEATER_2_MINTEMP) #if (EXTRUDERS > 2) && defined(HEATER_2_MINTEMP)
minttemp[2] = HEATER_2_MINTEMP; minttemp[2] = HEATER_2_MINTEMP;
while(analog2temp(minttemp_raw[2], 2) > HEATER_2_MINTEMP) { while(analog2temp(minttemp_raw[2], 2) < HEATER_2_MINTEMP) {
#if HEATER_2_RAW_LO_TEMP < HEATER_2_RAW_HI_TEMP #if HEATER_2_RAW_LO_TEMP < HEATER_2_RAW_HI_TEMP
minttemp_raw[2] += OVERSAMPLENR; minttemp_raw[2] += OVERSAMPLENR;
#else #else
@ -771,34 +895,34 @@ void disable_heater()
for(int i=0;i<EXTRUDERS;i++) for(int i=0;i<EXTRUDERS;i++)
setTargetHotend(0,i); setTargetHotend(0,i);
setTargetBed(0); setTargetBed(0);
#if TEMP_0_PIN > -1 #if defined(TEMP_0_PIN) && TEMP_0_PIN > -1
target_temperature[0]=0; target_temperature[0]=0;
soft_pwm[0]=0; soft_pwm[0]=0;
#if HEATER_0_PIN > -1 #if defined(HEATER_0_PIN) && HEATER_0_PIN > -1
WRITE(HEATER_0_PIN,LOW); WRITE(HEATER_0_PIN,LOW);
#endif #endif
#endif #endif
#if TEMP_1_PIN > -1 #if defined(TEMP_1_PIN) && TEMP_1_PIN > -1
target_temperature[1]=0; target_temperature[1]=0;
soft_pwm[1]=0; soft_pwm[1]=0;
#if HEATER_1_PIN > -1 #if defined(HEATER_1_PIN) && HEATER_1_PIN > -1
WRITE(HEATER_1_PIN,LOW); WRITE(HEATER_1_PIN,LOW);
#endif #endif
#endif #endif
#if TEMP_2_PIN > -1 #if defined(TEMP_2_PIN) && TEMP_2_PIN > -1
target_temperature[2]=0; target_temperature[2]=0;
soft_pwm[2]=0; soft_pwm[2]=0;
#if HEATER_2_PIN > -1 #if defined(HEATER_2_PIN) && HEATER_2_PIN > -1
WRITE(HEATER_2_PIN,LOW); WRITE(HEATER_2_PIN,LOW);
#endif #endif
#endif #endif
#if TEMP_BED_PIN > -1 #if defined(TEMP_BED_PIN) && TEMP_BED_PIN > -1
target_temperature_bed=0; target_temperature_bed=0;
soft_pwm_bed=0; soft_pwm_bed=0;
#if HEATER_BED_PIN > -1 #if defined(HEATER_BED_PIN) && HEATER_BED_PIN > -1
WRITE(HEATER_BED_PIN,LOW); WRITE(HEATER_BED_PIN,LOW);
#endif #endif
#endif #endif
@ -904,14 +1028,14 @@ int read_max6675()
// Timer 0 is shared with millies // Timer 0 is shared with millies
ISR(TIMER0_COMPB_vect) ISR(TIMER0_COMPB_vect)
{ {
//these variables are only accesible from the ISR, but static, so they don't loose their value //these variables are only accesible from the ISR, but static, so they don't lose their value
static unsigned char temp_count = 0; static unsigned char temp_count = 0;
static unsigned long raw_temp_0_value = 0; static unsigned long raw_temp_0_value = 0;
static unsigned long raw_temp_1_value = 0; static unsigned long raw_temp_1_value = 0;
static unsigned long raw_temp_2_value = 0; static unsigned long raw_temp_2_value = 0;
static unsigned long raw_temp_bed_value = 0; static unsigned long raw_temp_bed_value = 0;
static unsigned char temp_state = 0; static unsigned char temp_state = 0;
static unsigned char pwm_count = 1; static unsigned char pwm_count = (1 << SOFT_PWM_SCALE);
static unsigned char soft_pwm_0; static unsigned char soft_pwm_0;
#if EXTRUDERS > 1 #if EXTRUDERS > 1
static unsigned char soft_pwm_1; static unsigned char soft_pwm_1;
@ -934,12 +1058,12 @@ ISR(TIMER0_COMPB_vect)
soft_pwm_2 = soft_pwm[2]; soft_pwm_2 = soft_pwm[2];
if(soft_pwm_2 > 0) WRITE(HEATER_2_PIN,1); if(soft_pwm_2 > 0) WRITE(HEATER_2_PIN,1);
#endif #endif
#if HEATER_BED_PIN > -1 #if defined(HEATER_BED_PIN) && HEATER_BED_PIN > -1
soft_pwm_b = soft_pwm_bed; soft_pwm_b = soft_pwm_bed;
if(soft_pwm_b > 0) WRITE(HEATER_BED_PIN,1); if(soft_pwm_b > 0) WRITE(HEATER_BED_PIN,1);
#endif #endif
#ifdef FAN_SOFT_PWM #ifdef FAN_SOFT_PWM
soft_pwm_fan =(unsigned char) fanSpeed; soft_pwm_fan = fanSpeedSoftPwm / 2;
if(soft_pwm_fan > 0) WRITE(FAN_PIN,1); if(soft_pwm_fan > 0) WRITE(FAN_PIN,1);
#endif #endif
} }
@ -950,19 +1074,19 @@ ISR(TIMER0_COMPB_vect)
#if EXTRUDERS > 2 #if EXTRUDERS > 2
if(soft_pwm_2 <= pwm_count) WRITE(HEATER_2_PIN,0); if(soft_pwm_2 <= pwm_count) WRITE(HEATER_2_PIN,0);
#endif #endif
#if HEATER_BED_PIN > -1 #if defined(HEATER_BED_PIN) && HEATER_BED_PIN > -1
if(soft_pwm_b <= pwm_count) WRITE(HEATER_BED_PIN,0); if(soft_pwm_b <= pwm_count) WRITE(HEATER_BED_PIN,0);
#endif #endif
#ifdef FAN_SOFT_PWM #ifdef FAN_SOFT_PWM
if(soft_pwm_fan <= pwm_count) WRITE(FAN_PIN,0); if(soft_pwm_fan <= pwm_count) WRITE(FAN_PIN,0);
#endif #endif
pwm_count++; pwm_count += (1 << SOFT_PWM_SCALE);
pwm_count &= 0x7f; pwm_count &= 0x7f;
switch(temp_state) { switch(temp_state) {
case 0: // Prepare TEMP_0 case 0: // Prepare TEMP_0
#if (TEMP_0_PIN > -1) #if defined(TEMP_0_PIN) && (TEMP_0_PIN > -1)
#if TEMP_0_PIN > 7 #if TEMP_0_PIN > 7
ADCSRB = 1<<MUX5; ADCSRB = 1<<MUX5;
#else #else
@ -975,7 +1099,7 @@ ISR(TIMER0_COMPB_vect)
temp_state = 1; temp_state = 1;
break; break;
case 1: // Measure TEMP_0 case 1: // Measure TEMP_0
#if (TEMP_0_PIN > -1) #if defined(TEMP_0_PIN) && (TEMP_0_PIN > -1)
raw_temp_0_value += ADC; raw_temp_0_value += ADC;
#endif #endif
#ifdef HEATER_0_USES_MAX6675 // TODO remove the blocking #ifdef HEATER_0_USES_MAX6675 // TODO remove the blocking
@ -984,7 +1108,7 @@ ISR(TIMER0_COMPB_vect)
temp_state = 2; temp_state = 2;
break; break;
case 2: // Prepare TEMP_BED case 2: // Prepare TEMP_BED
#if (TEMP_BED_PIN > -1) #if defined(TEMP_BED_PIN) && (TEMP_BED_PIN > -1)
#if TEMP_BED_PIN > 7 #if TEMP_BED_PIN > 7
ADCSRB = 1<<MUX5; ADCSRB = 1<<MUX5;
#else #else
@ -997,13 +1121,13 @@ ISR(TIMER0_COMPB_vect)
temp_state = 3; temp_state = 3;
break; break;
case 3: // Measure TEMP_BED case 3: // Measure TEMP_BED
#if (TEMP_BED_PIN > -1) #if defined(TEMP_BED_PIN) && (TEMP_BED_PIN > -1)
raw_temp_bed_value += ADC; raw_temp_bed_value += ADC;
#endif #endif
temp_state = 4; temp_state = 4;
break; break;
case 4: // Prepare TEMP_1 case 4: // Prepare TEMP_1
#if (TEMP_1_PIN > -1) #if defined(TEMP_1_PIN) && (TEMP_1_PIN > -1)
#if TEMP_1_PIN > 7 #if TEMP_1_PIN > 7
ADCSRB = 1<<MUX5; ADCSRB = 1<<MUX5;
#else #else
@ -1016,13 +1140,13 @@ ISR(TIMER0_COMPB_vect)
temp_state = 5; temp_state = 5;
break; break;
case 5: // Measure TEMP_1 case 5: // Measure TEMP_1
#if (TEMP_1_PIN > -1) #if defined(TEMP_1_PIN) && (TEMP_1_PIN > -1)
raw_temp_1_value += ADC; raw_temp_1_value += ADC;
#endif #endif
temp_state = 6; temp_state = 6;
break; break;
case 6: // Prepare TEMP_2 case 6: // Prepare TEMP_2
#if (TEMP_2_PIN > -1) #if defined(TEMP_2_PIN) && (TEMP_2_PIN > -1)
#if TEMP_2_PIN > 7 #if TEMP_2_PIN > 7
ADCSRB = 1<<MUX5; ADCSRB = 1<<MUX5;
#else #else
@ -1035,7 +1159,7 @@ ISR(TIMER0_COMPB_vect)
temp_state = 7; temp_state = 7;
break; break;
case 7: // Measure TEMP_2 case 7: // Measure TEMP_2
#if (TEMP_2_PIN > -1) #if defined(TEMP_2_PIN) && (TEMP_2_PIN > -1)
raw_temp_2_value += ADC; raw_temp_2_value += ADC;
#endif #endif
temp_state = 0; temp_state = 0;
@ -1055,6 +1179,9 @@ ISR(TIMER0_COMPB_vect)
#if EXTRUDERS > 1 #if EXTRUDERS > 1
current_temperature_raw[1] = raw_temp_1_value; current_temperature_raw[1] = raw_temp_1_value;
#endif #endif
#ifdef TEMP_SENSOR_1_AS_REDUNDANT
redundant_temperature_raw = raw_temp_1_value;
#endif
#if EXTRUDERS > 2 #if EXTRUDERS > 2
current_temperature_raw[2] = raw_temp_2_value; current_temperature_raw[2] = raw_temp_2_value;
#endif #endif

3
Marlin/temperature.h
View file

@ -37,6 +37,9 @@ extern int target_temperature[EXTRUDERS];
extern float current_temperature[EXTRUDERS]; extern float current_temperature[EXTRUDERS];
extern int target_temperature_bed; extern int target_temperature_bed;
extern float current_temperature_bed; extern float current_temperature_bed;
#ifdef TEMP_SENSOR_1_AS_REDUNDANT
extern float redundant_temperature;
#endif
#ifdef PIDTEMP #ifdef PIDTEMP
extern float Kp,Ki,Kd,Kc; extern float Kp,Ki,Kd,Kc;

292
Marlin/ultralcd.cpp
View file

@ -8,6 +8,8 @@
#include "stepper.h" #include "stepper.h"
#include "ConfigurationStore.h" #include "ConfigurationStore.h"
int8_t encoderDiff; /* encoderDiff is updated from interrupt context and added to encoderPosition every LCD update */
/* Configuration settings */ /* Configuration settings */
int plaPreheatHotendTemp; int plaPreheatHotendTemp;
int plaPreheatHPBTemp; int plaPreheatHPBTemp;
@ -38,6 +40,7 @@ void copy_and_scalePID_d();
/* Different menus */ /* Different menus */
static void lcd_status_screen(); static void lcd_status_screen();
#ifdef ULTIPANEL #ifdef ULTIPANEL
extern bool powersupply;
static void lcd_main_menu(); static void lcd_main_menu();
static void lcd_tune_menu(); static void lcd_tune_menu();
static void lcd_prepare_menu(); static void lcd_prepare_menu();
@ -47,6 +50,9 @@ static void lcd_control_temperature_menu();
static void lcd_control_temperature_preheat_pla_settings_menu(); static void lcd_control_temperature_preheat_pla_settings_menu();
static void lcd_control_temperature_preheat_abs_settings_menu(); static void lcd_control_temperature_preheat_abs_settings_menu();
static void lcd_control_motion_menu(); static void lcd_control_motion_menu();
#ifdef DOGLCD
static void lcd_set_contrast();
#endif
static void lcd_control_retract_menu(); static void lcd_control_retract_menu();
static void lcd_sdcard_menu(); static void lcd_sdcard_menu();
@ -76,7 +82,14 @@ static void menu_action_setting_edit_callback_float51(const char* pstr, float* p
static void menu_action_setting_edit_callback_float52(const char* pstr, float* ptr, float minValue, float maxValue, menuFunc_t callbackFunc); static void menu_action_setting_edit_callback_float52(const char* pstr, float* ptr, float minValue, float maxValue, menuFunc_t callbackFunc);
static void menu_action_setting_edit_callback_long5(const char* pstr, unsigned long* ptr, unsigned long minValue, unsigned long maxValue, menuFunc_t callbackFunc); static void menu_action_setting_edit_callback_long5(const char* pstr, unsigned long* ptr, unsigned long minValue, unsigned long maxValue, menuFunc_t callbackFunc);
#define ENCODER_STEPS_PER_MENU_ITEM 5 #define ENCODER_FEEDRATE_DEADZONE 10
#if !defined(LCD_I2C_VIKI)
#define ENCODER_STEPS_PER_MENU_ITEM 5
#else
#define ENCODER_STEPS_PER_MENU_ITEM 2 // VIKI LCD rotary encoder uses a different number of steps per rotation
#endif
/* Helper macros for menus */ /* Helper macros for menus */
#define START_MENU() do { \ #define START_MENU() do { \
@ -112,14 +125,16 @@ static void menu_action_setting_edit_callback_long5(const char* pstr, unsigned l
} } while(0) } } while(0)
/** Used variables to keep track of the menu */ /** Used variables to keep track of the menu */
#ifndef REPRAPWORLD_KEYPAD
volatile uint8_t buttons;//Contains the bits of the currently pressed buttons. volatile uint8_t buttons;//Contains the bits of the currently pressed buttons.
#else
volatile uint8_t buttons_reprapworld_keypad; // to store the reprapworld_keypad shiftregister values
#endif
uint8_t currentMenuViewOffset; /* scroll offset in the current menu */ uint8_t currentMenuViewOffset; /* scroll offset in the current menu */
uint32_t blocking_enc; uint32_t blocking_enc;
uint8_t lastEncoderBits; uint8_t lastEncoderBits;
int8_t encoderDiff; /* encoderDiff is updated from interrupt context and added to encoderPosition every LCD update */
uint32_t encoderPosition; uint32_t encoderPosition;
#if (SDCARDDETECT > -1) #if (SDCARDDETECT > 0)
bool lcd_oldcardstatus; bool lcd_oldcardstatus;
#endif #endif
#endif//ULTIPANEL #endif//ULTIPANEL
@ -157,10 +172,34 @@ static void lcd_status_screen()
if (LCD_CLICKED) if (LCD_CLICKED)
{ {
currentMenu = lcd_main_menu; currentMenu = lcd_main_menu;
encoderPosition = 0;
lcd_quick_feedback(); lcd_quick_feedback();
} }
feedmultiply += int(encoderPosition);
encoderPosition = 0; // Dead zone at 100% feedrate
if ((feedmultiply < 100 && (feedmultiply + int(encoderPosition)) > 100) ||
(feedmultiply > 100 && (feedmultiply + int(encoderPosition)) < 100))
{
encoderPosition = 0;
feedmultiply = 100;
}
if (feedmultiply == 100 && int(encoderPosition) > ENCODER_FEEDRATE_DEADZONE)
{
feedmultiply += int(encoderPosition) - ENCODER_FEEDRATE_DEADZONE;
encoderPosition = 0;
}
else if (feedmultiply == 100 && int(encoderPosition) < -ENCODER_FEEDRATE_DEADZONE)
{
feedmultiply += int(encoderPosition) + ENCODER_FEEDRATE_DEADZONE;
encoderPosition = 0;
}
else if (feedmultiply != 100)
{
feedmultiply += int(encoderPosition);
encoderPosition = 0;
}
if (feedmultiply < 10) if (feedmultiply < 10)
feedmultiply = 10; feedmultiply = 10;
if (feedmultiply > 999) if (feedmultiply > 999)
@ -221,14 +260,14 @@ static void lcd_main_menu()
}else{ }else{
MENU_ITEM(submenu, MSG_CARD_MENU, lcd_sdcard_menu); MENU_ITEM(submenu, MSG_CARD_MENU, lcd_sdcard_menu);
#if SDCARDDETECT < 1 #if SDCARDDETECT < 1
MENU_ITEM(gcode, MSG_CNG_SDCARD, PSTR("M21")); // SD-card changed by user MENU_ITEM(gcode, MSG_CNG_SDCARD, PSTR("M21")); // SD-card changed by user
#endif #endif
} }
}else{ }else{
MENU_ITEM(submenu, MSG_NO_CARD, lcd_sdcard_menu); MENU_ITEM(submenu, MSG_NO_CARD, lcd_sdcard_menu);
#if SDCARDDETECT < 1 #if SDCARDDETECT < 1
MENU_ITEM(gcode, MSG_INIT_SDCARD, PSTR("M21")); // Manually initialize the SD-card via user interface MENU_ITEM(gcode, MSG_INIT_SDCARD, PSTR("M21")); // Manually initialize the SD-card via user interface
#endif #endif
} }
#endif #endif
END_MENU(); END_MENU();
@ -251,6 +290,7 @@ void lcd_preheat_pla()
setTargetBed(plaPreheatHPBTemp); setTargetBed(plaPreheatHPBTemp);
fanSpeed = plaPreheatFanSpeed; fanSpeed = plaPreheatFanSpeed;
lcd_return_to_status(); lcd_return_to_status();
setWatch(); // heater sanity check timer
} }
void lcd_preheat_abs() void lcd_preheat_abs()
@ -261,6 +301,16 @@ void lcd_preheat_abs()
setTargetBed(absPreheatHPBTemp); setTargetBed(absPreheatHPBTemp);
fanSpeed = absPreheatFanSpeed; fanSpeed = absPreheatFanSpeed;
lcd_return_to_status(); lcd_return_to_status();
setWatch(); // heater sanity check timer
}
static void lcd_cooldown()
{
setTargetHotend0(0);
setTargetHotend1(0);
setTargetHotend2(0);
setTargetBed(0);
lcd_return_to_status();
} }
static void lcd_tune_menu() static void lcd_tune_menu()
@ -298,7 +348,15 @@ static void lcd_prepare_menu()
//MENU_ITEM(gcode, MSG_SET_ORIGIN, PSTR("G92 X0 Y0 Z0")); //MENU_ITEM(gcode, MSG_SET_ORIGIN, PSTR("G92 X0 Y0 Z0"));
MENU_ITEM(function, MSG_PREHEAT_PLA, lcd_preheat_pla); MENU_ITEM(function, MSG_PREHEAT_PLA, lcd_preheat_pla);
MENU_ITEM(function, MSG_PREHEAT_ABS, lcd_preheat_abs); MENU_ITEM(function, MSG_PREHEAT_ABS, lcd_preheat_abs);
MENU_ITEM(gcode, MSG_COOLDOWN, PSTR("M104 S0\nM140 S0")); MENU_ITEM(function, MSG_COOLDOWN, lcd_cooldown);
#if PS_ON_PIN > -1
if (powersupply)
{
MENU_ITEM(gcode, MSG_SWITCH_PS_OFF, PSTR("M81"));
}else{
MENU_ITEM(gcode, MSG_SWITCH_PS_ON, PSTR("M80"));
}
#endif
MENU_ITEM(submenu, MSG_MOVE_AXIS, lcd_move_menu); MENU_ITEM(submenu, MSG_MOVE_AXIS, lcd_move_menu);
END_MENU(); END_MENU();
} }
@ -311,9 +369,9 @@ static void lcd_move_x()
if (encoderPosition != 0) if (encoderPosition != 0)
{ {
current_position[X_AXIS] += float((int)encoderPosition) * move_menu_scale; current_position[X_AXIS] += float((int)encoderPosition) * move_menu_scale;
if (current_position[X_AXIS] < X_MIN_POS) if (min_software_endstops && current_position[X_AXIS] < X_MIN_POS)
current_position[X_AXIS] = X_MIN_POS; current_position[X_AXIS] = X_MIN_POS;
if (current_position[X_AXIS] > X_MAX_POS) if (max_software_endstops && current_position[X_AXIS] > X_MAX_POS)
current_position[X_AXIS] = X_MAX_POS; current_position[X_AXIS] = X_MAX_POS;
encoderPosition = 0; encoderPosition = 0;
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 600, active_extruder); plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 600, active_extruder);
@ -335,9 +393,9 @@ static void lcd_move_y()
if (encoderPosition != 0) if (encoderPosition != 0)
{ {
current_position[Y_AXIS] += float((int)encoderPosition) * move_menu_scale; current_position[Y_AXIS] += float((int)encoderPosition) * move_menu_scale;
if (current_position[Y_AXIS] < Y_MIN_POS) if (min_software_endstops && current_position[Y_AXIS] < Y_MIN_POS)
current_position[Y_AXIS] = Y_MIN_POS; current_position[Y_AXIS] = Y_MIN_POS;
if (current_position[Y_AXIS] > Y_MAX_POS) if (max_software_endstops && current_position[Y_AXIS] > Y_MAX_POS)
current_position[Y_AXIS] = Y_MAX_POS; current_position[Y_AXIS] = Y_MAX_POS;
encoderPosition = 0; encoderPosition = 0;
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 600, active_extruder); plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 600, active_extruder);
@ -359,12 +417,12 @@ static void lcd_move_z()
if (encoderPosition != 0) if (encoderPosition != 0)
{ {
current_position[Z_AXIS] += float((int)encoderPosition) * move_menu_scale; current_position[Z_AXIS] += float((int)encoderPosition) * move_menu_scale;
if (current_position[Z_AXIS] < Z_MIN_POS) if (min_software_endstops && current_position[Z_AXIS] < Z_MIN_POS)
current_position[Z_AXIS] = Z_MIN_POS; current_position[Z_AXIS] = Z_MIN_POS;
if (current_position[Z_AXIS] > Z_MAX_POS) if (max_software_endstops && current_position[Z_AXIS] > Z_MAX_POS)
current_position[Z_AXIS] = Z_MAX_POS; current_position[Z_AXIS] = Z_MAX_POS;
encoderPosition = 0; encoderPosition = 0;
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 60, active_extruder); plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], homing_feedrate[Z_AXIS]/60, active_extruder);
lcdDrawUpdate = 1; lcdDrawUpdate = 1;
} }
if (lcdDrawUpdate) if (lcdDrawUpdate)
@ -446,6 +504,10 @@ static void lcd_control_menu()
MENU_ITEM(back, MSG_MAIN, lcd_main_menu); MENU_ITEM(back, MSG_MAIN, lcd_main_menu);
MENU_ITEM(submenu, MSG_TEMPERATURE, lcd_control_temperature_menu); MENU_ITEM(submenu, MSG_TEMPERATURE, lcd_control_temperature_menu);
MENU_ITEM(submenu, MSG_MOTION, lcd_control_motion_menu); MENU_ITEM(submenu, MSG_MOTION, lcd_control_motion_menu);
#ifdef DOGLCD
// MENU_ITEM_EDIT(int3, MSG_CONTRAST, &lcd_contrast, 0, 63);
MENU_ITEM(submenu, MSG_CONTRAST, lcd_set_contrast);
#endif
#ifdef FWRETRACT #ifdef FWRETRACT
MENU_ITEM(submenu, MSG_RETRACT, lcd_control_retract_menu); MENU_ITEM(submenu, MSG_RETRACT, lcd_control_retract_menu);
#endif #endif
@ -459,10 +521,12 @@ static void lcd_control_menu()
static void lcd_control_temperature_menu() static void lcd_control_temperature_menu()
{ {
// set up temp variables - undo the default scaling #ifdef PIDTEMP
raw_Ki = unscalePID_i(Ki); // set up temp variables - undo the default scaling
raw_Kd = unscalePID_d(Kd); raw_Ki = unscalePID_i(Ki);
raw_Kd = unscalePID_d(Kd);
#endif
START_MENU(); START_MENU();
MENU_ITEM(back, MSG_CONTROL, lcd_control_menu); MENU_ITEM(back, MSG_CONTROL, lcd_control_menu);
MENU_ITEM_EDIT(int3, MSG_NOZZLE, &target_temperature[0], 0, HEATER_0_MAXTEMP - 15); MENU_ITEM_EDIT(int3, MSG_NOZZLE, &target_temperature[0], 0, HEATER_0_MAXTEMP - 15);
@ -484,7 +548,7 @@ static void lcd_control_temperature_menu()
#endif #endif
#ifdef PIDTEMP #ifdef PIDTEMP
MENU_ITEM_EDIT(float52, MSG_PID_P, &Kp, 1, 9990); MENU_ITEM_EDIT(float52, MSG_PID_P, &Kp, 1, 9990);
// i is typically a small value so allows values below 1 // i is typically a small value so allows values below 1
MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_I, &raw_Ki, 0.01, 9990, copy_and_scalePID_i); MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_I, &raw_Ki, 0.01, 9990, copy_and_scalePID_i);
MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_D, &raw_Kd, 1, 9990, copy_and_scalePID_d); MENU_ITEM_EDIT_CALLBACK(float52, MSG_PID_D, &raw_Kd, 1, 9990, copy_and_scalePID_d);
# ifdef PID_ADD_EXTRUSION_RATE # ifdef PID_ADD_EXTRUSION_RATE
@ -555,6 +619,31 @@ static void lcd_control_motion_menu()
END_MENU(); END_MENU();
} }
#ifdef DOGLCD
static void lcd_set_contrast()
{
if (encoderPosition != 0)
{
lcd_contrast -= encoderPosition;
if (lcd_contrast < 0) lcd_contrast = 0;
else if (lcd_contrast > 63) lcd_contrast = 63;
encoderPosition = 0;
lcdDrawUpdate = 1;
u8g.setContrast(lcd_contrast);
}
if (lcdDrawUpdate)
{
lcd_implementation_drawedit(PSTR("Contrast"), itostr2(lcd_contrast));
}
if (LCD_CLICKED)
{
lcd_quick_feedback();
currentMenu = lcd_control_menu;
encoderPosition = 0;
}
}
#endif
#ifdef FWRETRACT #ifdef FWRETRACT
static void lcd_control_retract_menu() static void lcd_control_retract_menu()
{ {
@ -687,6 +776,42 @@ menu_edit_type(float, float51, ftostr51, 10)
menu_edit_type(float, float52, ftostr52, 100) menu_edit_type(float, float52, ftostr52, 100)
menu_edit_type(unsigned long, long5, ftostr5, 0.01) menu_edit_type(unsigned long, long5, ftostr5, 0.01)
#ifdef REPRAPWORLD_KEYPAD
static void reprapworld_keypad_move_z_up() {
encoderPosition = 1;
move_menu_scale = REPRAPWORLD_KEYPAD_MOVE_STEP;
lcd_move_z();
}
static void reprapworld_keypad_move_z_down() {
encoderPosition = -1;
move_menu_scale = REPRAPWORLD_KEYPAD_MOVE_STEP;
lcd_move_z();
}
static void reprapworld_keypad_move_x_left() {
encoderPosition = -1;
move_menu_scale = REPRAPWORLD_KEYPAD_MOVE_STEP;
lcd_move_x();
}
static void reprapworld_keypad_move_x_right() {
encoderPosition = 1;
move_menu_scale = REPRAPWORLD_KEYPAD_MOVE_STEP;
lcd_move_x();
}
static void reprapworld_keypad_move_y_down() {
encoderPosition = 1;
move_menu_scale = REPRAPWORLD_KEYPAD_MOVE_STEP;
lcd_move_y();
}
static void reprapworld_keypad_move_y_up() {
encoderPosition = -1;
move_menu_scale = REPRAPWORLD_KEYPAD_MOVE_STEP;
lcd_move_y();
}
static void reprapworld_keypad_move_home() {
enquecommand_P((PSTR("G28"))); // move all axis home
}
#endif
/** End of menus **/ /** End of menus **/
static void lcd_quick_feedback() static void lcd_quick_feedback()
@ -745,11 +870,20 @@ void lcd_init()
#ifdef NEWPANEL #ifdef NEWPANEL
pinMode(BTN_EN1,INPUT); pinMode(BTN_EN1,INPUT);
pinMode(BTN_EN2,INPUT); pinMode(BTN_EN2,INPUT);
pinMode(BTN_ENC,INPUT);
pinMode(SDCARDDETECT,INPUT); pinMode(SDCARDDETECT,INPUT);
WRITE(BTN_EN1,HIGH); WRITE(BTN_EN1,HIGH);
WRITE(BTN_EN2,HIGH); WRITE(BTN_EN2,HIGH);
#if BTN_ENC > 0
pinMode(BTN_ENC,INPUT);
WRITE(BTN_ENC,HIGH); WRITE(BTN_ENC,HIGH);
#endif
#ifdef REPRAPWORLD_KEYPAD
pinMode(SHIFT_CLK,OUTPUT);
pinMode(SHIFT_LD,OUTPUT);
pinMode(SHIFT_OUT,INPUT);
WRITE(SHIFT_OUT,HIGH);
WRITE(SHIFT_LD,HIGH);
#endif
#else #else
pinMode(SHIFT_CLK,OUTPUT); pinMode(SHIFT_CLK,OUTPUT);
pinMode(SHIFT_LD,OUTPUT); pinMode(SHIFT_LD,OUTPUT);
@ -759,12 +893,14 @@ void lcd_init()
WRITE(SHIFT_LD,HIGH); WRITE(SHIFT_LD,HIGH);
WRITE(SHIFT_EN,LOW); WRITE(SHIFT_EN,LOW);
#endif//!NEWPANEL #endif//!NEWPANEL
#if (SDCARDDETECT > -1) #if (SDCARDDETECT > 0)
WRITE(SDCARDDETECT, HIGH); WRITE(SDCARDDETECT, HIGH);
lcd_oldcardstatus = IS_SD_INSERTED; lcd_oldcardstatus = IS_SD_INSERTED;
#endif//(SDCARDDETECT > -1) #endif//(SDCARDDETECT > 0)
lcd_buttons_update(); lcd_buttons_update();
#ifdef ULTIPANEL
encoderDiff = 0; encoderDiff = 0;
#endif
} }
void lcd_update() void lcd_update()
@ -773,7 +909,11 @@ void lcd_update()
lcd_buttons_update(); lcd_buttons_update();
#if (SDCARDDETECT > -1) #ifdef LCD_HAS_SLOW_BUTTONS
buttons |= lcd_implementation_read_slow_buttons(); // buttons which take too long to read in interrupt context
#endif
#if (SDCARDDETECT > 0)
if((IS_SD_INSERTED != lcd_oldcardstatus)) if((IS_SD_INSERTED != lcd_oldcardstatus))
{ {
lcdDrawUpdate = 2; lcdDrawUpdate = 2;
@ -796,6 +936,29 @@ void lcd_update()
if (lcd_next_update_millis < millis()) if (lcd_next_update_millis < millis())
{ {
#ifdef ULTIPANEL #ifdef ULTIPANEL
#ifdef REPRAPWORLD_KEYPAD
if (REPRAPWORLD_KEYPAD_MOVE_Z_UP) {
reprapworld_keypad_move_z_up();
}
if (REPRAPWORLD_KEYPAD_MOVE_Z_DOWN) {
reprapworld_keypad_move_z_down();
}
if (REPRAPWORLD_KEYPAD_MOVE_X_LEFT) {
reprapworld_keypad_move_x_left();
}
if (REPRAPWORLD_KEYPAD_MOVE_X_RIGHT) {
reprapworld_keypad_move_x_right();
}
if (REPRAPWORLD_KEYPAD_MOVE_Y_DOWN) {
reprapworld_keypad_move_y_down();
}
if (REPRAPWORLD_KEYPAD_MOVE_Y_UP) {
reprapworld_keypad_move_y_up();
}
if (REPRAPWORLD_KEYPAD_MOVE_HOME) {
reprapworld_keypad_move_home();
}
#endif
if (encoderDiff) if (encoderDiff)
{ {
lcdDrawUpdate = 1; lcdDrawUpdate = 1;
@ -808,21 +971,26 @@ void lcd_update()
#endif//ULTIPANEL #endif//ULTIPANEL
#ifdef DOGLCD // Changes due to different driver architecture of the DOGM display #ifdef DOGLCD // Changes due to different driver architecture of the DOGM display
blink++; // Variable for fan animation and alive dot blink++; // Variable for fan animation and alive dot
u8g.firstPage(); u8g.firstPage();
do { do
u8g.setFont(u8g_font_6x10_marlin); {
u8g.setPrintPos(125,0); u8g.setFont(u8g_font_6x10_marlin);
if (blink % 2) u8g.setColorIndex(1); else u8g.setColorIndex(0); // Set color for the alive dot u8g.setPrintPos(125,0);
u8g.drawPixel(127,63); // draw alive dot if (blink % 2) u8g.setColorIndex(1); else u8g.setColorIndex(0); // Set color for the alive dot
u8g.setColorIndex(1); // black on white u8g.drawPixel(127,63); // draw alive dot
(*currentMenu)(); u8g.setColorIndex(1); // black on white
if (!lcdDrawUpdate) break; // Terminate display update, when nothing new to draw. This must be done before the last dogm.next() (*currentMenu)();
} while( u8g.nextPage() ); if (!lcdDrawUpdate) break; // Terminate display update, when nothing new to draw. This must be done before the last dogm.next()
} while( u8g.nextPage() );
#else #else
(*currentMenu)(); (*currentMenu)();
#endif #endif
#ifdef LCD_HAS_STATUS_INDICATORS
lcd_implementation_update_indicators();
#endif
#ifdef ULTIPANEL #ifdef ULTIPANEL
if(timeoutToStatus < millis() && currentMenu != lcd_status_screen) if(timeoutToStatus < millis() && currentMenu != lcd_status_screen)
{ {
@ -865,6 +1033,14 @@ void lcd_reset_alert_level()
lcd_status_message_level = 0; lcd_status_message_level = 0;
} }
#ifdef DOGLCD
void lcd_setcontrast(uint8_t value)
{
lcd_contrast = value & 63;
u8g.setContrast(lcd_contrast);
}
#endif
#ifdef ULTIPANEL #ifdef ULTIPANEL
/* Warning: This function is called from interrupt context */ /* Warning: This function is called from interrupt context */
void lcd_buttons_update() void lcd_buttons_update()
@ -873,9 +1049,25 @@ void lcd_buttons_update()
uint8_t newbutton=0; uint8_t newbutton=0;
if(READ(BTN_EN1)==0) newbutton|=EN_A; if(READ(BTN_EN1)==0) newbutton|=EN_A;
if(READ(BTN_EN2)==0) newbutton|=EN_B; if(READ(BTN_EN2)==0) newbutton|=EN_B;
#if BTN_ENC > 0
if((blocking_enc<millis()) && (READ(BTN_ENC)==0)) if((blocking_enc<millis()) && (READ(BTN_ENC)==0))
newbutton |= EN_C; newbutton |= EN_C;
#endif
buttons = newbutton; buttons = newbutton;
#ifdef REPRAPWORLD_KEYPAD
// for the reprapworld_keypad
uint8_t newbutton_reprapworld_keypad=0;
WRITE(SHIFT_LD,LOW);
WRITE(SHIFT_LD,HIGH);
for(int8_t i=0;i<8;i++) {
newbutton_reprapworld_keypad = newbutton_reprapworld_keypad>>1;
if(READ(SHIFT_OUT))
newbutton_reprapworld_keypad|=(1<<7);
WRITE(SHIFT_CLK,HIGH);
WRITE(SHIFT_CLK,LOW);
}
buttons_reprapworld_keypad=~newbutton_reprapworld_keypad; //invert it, because a pressed switch produces a logical 0
#endif
#else //read it from the shift register #else //read it from the shift register
uint8_t newbutton=0; uint8_t newbutton=0;
WRITE(SHIFT_LD,LOW); WRITE(SHIFT_LD,LOW);
@ -930,6 +1122,18 @@ void lcd_buttons_update()
} }
lastEncoderBits = enc; lastEncoderBits = enc;
} }
void lcd_buzz(long duration, uint16_t freq)
{
#ifdef LCD_USE_I2C_BUZZER
lcd.buzz(duration,freq);
#endif
}
bool lcd_clicked()
{
return LCD_CLICKED;
}
#endif//ULTIPANEL #endif//ULTIPANEL
/********************************/ /********************************/
@ -1129,16 +1333,20 @@ char *ftostr52(const float &x)
// grab the pid i value out of the temp variable; scale it; then update the PID driver // grab the pid i value out of the temp variable; scale it; then update the PID driver
void copy_and_scalePID_i() void copy_and_scalePID_i()
{ {
#ifdef PIDTEMP
Ki = scalePID_i(raw_Ki); Ki = scalePID_i(raw_Ki);
updatePID(); updatePID();
} #endif
}
// Callback for after editing PID d value // Callback for after editing PID d value
// grab the pid d value out of the temp variable; scale it; then update the PID driver // grab the pid d value out of the temp variable; scale it; then update the PID driver
void copy_and_scalePID_d() void copy_and_scalePID_d()
{ {
#ifdef PIDTEMP
Kd = scalePID_d(raw_Kd); Kd = scalePID_d(raw_Kd);
updatePID(); updatePID();
} #endif
}
#endif //ULTRA_LCD #endif //ULTRA_LCD

33
Marlin/ultralcd.h
View file

@ -11,7 +11,12 @@
void lcd_setstatuspgm(const char* message); void lcd_setstatuspgm(const char* message);
void lcd_setalertstatuspgm(const char* message); void lcd_setalertstatuspgm(const char* message);
void lcd_reset_alert_level(); void lcd_reset_alert_level();
#ifdef DOGLCD
extern int lcd_contrast;
void lcd_setcontrast(uint8_t value);
#endif
static unsigned char blink = 0; // Variable for visualisation of fan rotation in GLCD static unsigned char blink = 0; // Variable for visualisation of fan rotation in GLCD
#define LCD_MESSAGEPGM(x) lcd_setstatuspgm(PSTR(x)) #define LCD_MESSAGEPGM(x) lcd_setstatuspgm(PSTR(x))
@ -23,6 +28,9 @@
#ifdef ULTIPANEL #ifdef ULTIPANEL
void lcd_buttons_update(); void lcd_buttons_update();
extern volatile uint8_t buttons; //the last checked buttons in a bit array. extern volatile uint8_t buttons; //the last checked buttons in a bit array.
#ifdef REPRAPWORLD_KEYPAD
extern volatile uint8_t buttons_reprapworld_keypad; // to store the keypad shiftregister values
#endif
#else #else
FORCE_INLINE void lcd_buttons_update() {} FORCE_INLINE void lcd_buttons_update() {}
#endif #endif
@ -35,12 +43,34 @@
extern int absPreheatHPBTemp; extern int absPreheatHPBTemp;
extern int absPreheatFanSpeed; extern int absPreheatFanSpeed;
void lcd_buzz(long duration,uint16_t freq);
bool lcd_clicked();
#ifdef NEWPANEL #ifdef NEWPANEL
#define EN_C (1<<BLEN_C) #define EN_C (1<<BLEN_C)
#define EN_B (1<<BLEN_B) #define EN_B (1<<BLEN_B)
#define EN_A (1<<BLEN_A) #define EN_A (1<<BLEN_A)
#define LCD_CLICKED (buttons&EN_C) #define LCD_CLICKED (buttons&EN_C)
#ifdef REPRAPWORLD_KEYPAD
#define EN_REPRAPWORLD_KEYPAD_F3 (1<<BLEN_REPRAPWORLD_KEYPAD_F3)
#define EN_REPRAPWORLD_KEYPAD_F2 (1<<BLEN_REPRAPWORLD_KEYPAD_F2)
#define EN_REPRAPWORLD_KEYPAD_F1 (1<<BLEN_REPRAPWORLD_KEYPAD_F1)
#define EN_REPRAPWORLD_KEYPAD_UP (1<<BLEN_REPRAPWORLD_KEYPAD_UP)
#define EN_REPRAPWORLD_KEYPAD_RIGHT (1<<BLEN_REPRAPWORLD_KEYPAD_RIGHT)
#define EN_REPRAPWORLD_KEYPAD_MIDDLE (1<<BLEN_REPRAPWORLD_KEYPAD_MIDDLE)
#define EN_REPRAPWORLD_KEYPAD_DOWN (1<<BLEN_REPRAPWORLD_KEYPAD_DOWN)
#define EN_REPRAPWORLD_KEYPAD_LEFT (1<<BLEN_REPRAPWORLD_KEYPAD_LEFT)
#define LCD_CLICKED ((buttons&EN_C) || (buttons_reprapworld_keypad&EN_REPRAPWORLD_KEYPAD_F1))
#define REPRAPWORLD_KEYPAD_MOVE_Z_UP (buttons_reprapworld_keypad&EN_REPRAPWORLD_KEYPAD_F2)
#define REPRAPWORLD_KEYPAD_MOVE_Z_DOWN (buttons_reprapworld_keypad&EN_REPRAPWORLD_KEYPAD_F3)
#define REPRAPWORLD_KEYPAD_MOVE_X_LEFT (buttons_reprapworld_keypad&EN_REPRAPWORLD_KEYPAD_LEFT)
#define REPRAPWORLD_KEYPAD_MOVE_X_RIGHT (buttons_reprapworld_keypad&EN_REPRAPWORLD_KEYPAD_RIGHT)
#define REPRAPWORLD_KEYPAD_MOVE_Y_DOWN (buttons_reprapworld_keypad&EN_REPRAPWORLD_KEYPAD_DOWN)
#define REPRAPWORLD_KEYPAD_MOVE_Y_UP (buttons_reprapworld_keypad&EN_REPRAPWORLD_KEYPAD_UP)
#define REPRAPWORLD_KEYPAD_MOVE_HOME (buttons_reprapworld_keypad&EN_REPRAPWORLD_KEYPAD_MIDDLE)
#endif //REPRAPWORLD_KEYPAD
#else #else
//atomatic, do not change //atomatic, do not change
#define B_LE (1<<BL_LE) #define B_LE (1<<BL_LE)
@ -61,6 +91,7 @@
FORCE_INLINE void lcd_setstatus(const char* message) {} FORCE_INLINE void lcd_setstatus(const char* message) {}
FORCE_INLINE void lcd_buttons_update() {} FORCE_INLINE void lcd_buttons_update() {}
FORCE_INLINE void lcd_reset_alert_level() {} FORCE_INLINE void lcd_reset_alert_level() {}
FORCE_INLINE void lcd_buzz(long duration,uint16_t freq) {}
#define LCD_MESSAGEPGM(x) #define LCD_MESSAGEPGM(x)
#define LCD_ALERTMESSAGEPGM(x) #define LCD_ALERTMESSAGEPGM(x)

294
Marlin/ultralcd_implementation_hitachi_HD44780.h
View file

@ -6,12 +6,196 @@
* When selecting the rusian language, a slightly different LCD implementation is used to handle UTF8 characters. * When selecting the rusian language, a slightly different LCD implementation is used to handle UTF8 characters.
**/ **/
#if LANGUAGE_CHOICE == 6 #ifndef REPRAPWORLD_KEYPAD
#include "LiquidCrystalRus.h" extern volatile uint8_t buttons; //the last checked buttons in a bit array.
#define LCD_CLASS LiquidCrystalRus
#else #else
#include <LiquidCrystal.h> extern volatile uint16_t buttons; //an extended version of the last checked buttons in a bit array.
#define LCD_CLASS LiquidCrystal #endif
////////////////////////////////////
// Setup button and encode mappings for each panel (into 'buttons' variable
//
// This is just to map common functions (across different panels) onto the same
// macro name. The mapping is independent of whether the button is directly connected or
// via a shift/i2c register.
#ifdef ULTIPANEL
// All Ultipanels might have an encoder - so this is always be mapped onto first two bits
#define BLEN_B 1
#define BLEN_A 0
#define EN_B (1<<BLEN_B) // The two encoder pins are connected through BTN_EN1 and BTN_EN2
#define EN_A (1<<BLEN_A)
#if defined(BTN_ENC) && BTN_ENC > -1
// encoder click is directly connected
#define BLEN_C 2
#define EN_C (1<<BLEN_C)
#endif
//
// Setup other button mappings of each panel
//
#if defined(LCD_I2C_VIKI)
#define B_I2C_BTN_OFFSET 3 // (the first three bit positions reserved for EN_A, EN_B, EN_C)
// button and encoder bit positions within 'buttons'
#define B_LE (BUTTON_LEFT<<B_I2C_BTN_OFFSET) // The remaining normalized buttons are all read via I2C
#define B_UP (BUTTON_UP<<B_I2C_BTN_OFFSET)
#define B_MI (BUTTON_SELECT<<B_I2C_BTN_OFFSET)
#define B_DW (BUTTON_DOWN<<B_I2C_BTN_OFFSET)
#define B_RI (BUTTON_RIGHT<<B_I2C_BTN_OFFSET)
#if defined(BTN_ENC) && BTN_ENC > -1
// the pause/stop/restart button is connected to BTN_ENC when used
#define B_ST (EN_C) // Map the pause/stop/resume button into its normalized functional name
#define LCD_CLICKED (buttons&(B_MI|B_RI|B_ST)) // pause/stop button also acts as click until we implement proper pause/stop.
#else
#define LCD_CLICKED (buttons&(B_MI|B_RI))
#endif
// I2C buttons take too long to read inside an interrupt context and so we read them during lcd_update
#define LCD_HAS_SLOW_BUTTONS
#elif defined(LCD_I2C_PANELOLU2)
// encoder click can be read through I2C if not directly connected
#if BTN_ENC <= 0
#define B_I2C_BTN_OFFSET 3 // (the first three bit positions reserved for EN_A, EN_B, EN_C)
#define B_MI (PANELOLU2_ENCODER_C<<B_I2C_BTN_OFFSET) // requires LiquidTWI2 library v1.2.3 or later
#define LCD_CLICKED (buttons&B_MI)
// I2C buttons take too long to read inside an interrupt context and so we read them during lcd_update
#define LCD_HAS_SLOW_BUTTONS
#else
#define LCD_CLICKED (buttons&EN_C)
#endif
#elif defined(REPRAPWORLD_KEYPAD)
// define register bit values, don't change it
#define BLEN_REPRAPWORLD_KEYPAD_F3 0
#define BLEN_REPRAPWORLD_KEYPAD_F2 1
#define BLEN_REPRAPWORLD_KEYPAD_F1 2
#define BLEN_REPRAPWORLD_KEYPAD_UP 3
#define BLEN_REPRAPWORLD_KEYPAD_RIGHT 4
#define BLEN_REPRAPWORLD_KEYPAD_MIDDLE 5
#define BLEN_REPRAPWORLD_KEYPAD_DOWN 6
#define BLEN_REPRAPWORLD_KEYPAD_LEFT 7
#define REPRAPWORLD_BTN_OFFSET 3 // bit offset into buttons for shift register values
#define EN_REPRAPWORLD_KEYPAD_F3 (1<<(BLEN_REPRAPWORLD_KEYPAD_F3+REPRAPWORLD_BTN_OFFSET))
#define EN_REPRAPWORLD_KEYPAD_F2 (1<<(BLEN_REPRAPWORLD_KEYPAD_F2+REPRAPWORLD_BTN_OFFSET))
#define EN_REPRAPWORLD_KEYPAD_F1 (1<<(BLEN_REPRAPWORLD_KEYPAD_F1+REPRAPWORLD_BTN_OFFSET))
#define EN_REPRAPWORLD_KEYPAD_UP (1<<(BLEN_REPRAPWORLD_KEYPAD_UP+REPRAPWORLD_BTN_OFFSET))
#define EN_REPRAPWORLD_KEYPAD_RIGHT (1<<(BLEN_REPRAPWORLD_KEYPAD_RIGHT+REPRAPWORLD_BTN_OFFSET))
#define EN_REPRAPWORLD_KEYPAD_MIDDLE (1<<(BLEN_REPRAPWORLD_KEYPAD_MIDDLE+REPRAPWORLD_BTN_OFFSET))
#define EN_REPRAPWORLD_KEYPAD_DOWN (1<<(BLEN_REPRAPWORLD_KEYPAD_DOWN+REPRAPWORLD_BTN_OFFSET))
#define EN_REPRAPWORLD_KEYPAD_LEFT (1<<(BLEN_REPRAPWORLD_KEYPAD_LEFT+REPRAPWORLD_BTN_OFFSET))
#define LCD_CLICKED ((buttons&EN_C) || (buttons&EN_REPRAPWORLD_KEYPAD_F1))
#define REPRAPWORLD_KEYPAD_MOVE_Y_DOWN (buttons&EN_REPRAPWORLD_KEYPAD_DOWN)
#define REPRAPWORLD_KEYPAD_MOVE_Y_UP (buttons&EN_REPRAPWORLD_KEYPAD_UP)
#define REPRAPWORLD_KEYPAD_MOVE_HOME (buttons&EN_REPRAPWORLD_KEYPAD_MIDDLE)
#elif defined(NEWPANEL)
#define LCD_CLICKED (buttons&EN_C)
#else // old style ULTIPANEL
//bits in the shift register that carry the buttons for:
// left up center down right red(stop)
#define BL_LE 7
#define BL_UP 6
#define BL_MI 5
#define BL_DW 4
#define BL_RI 3
#define BL_ST 2
//automatic, do not change
#define B_LE (1<<BL_LE)
#define B_UP (1<<BL_UP)
#define B_MI (1<<BL_MI)
#define B_DW (1<<BL_DW)
#define B_RI (1<<BL_RI)
#define B_ST (1<<BL_ST)
#define LCD_CLICKED (buttons&(B_MI|B_ST))
#endif
////////////////////////
// Setup Rotary Encoder Bit Values (for two pin encoders to indicate movement)
// These values are independent of which pins are used for EN_A and EN_B indications
// The rotary encoder part is also independent to the chipset used for the LCD
#if defined(EN_A) && defined(EN_B)
#ifndef ULTIMAKERCONTROLLER
#define encrot0 0
#define encrot1 2
#define encrot2 3
#define encrot3 1
#else
#define encrot0 0
#define encrot1 1
#define encrot2 3
#define encrot3 2
#endif
#endif
#endif //ULTIPANEL
////////////////////////////////////
// Create LCD class instance and chipset-specific information
#if defined(LCD_I2C_TYPE_PCF8575)
// note: these are register mapped pins on the PCF8575 controller not Arduino pins
#define LCD_I2C_PIN_BL 3
#define LCD_I2C_PIN_EN 2
#define LCD_I2C_PIN_RW 1
#define LCD_I2C_PIN_RS 0
#define LCD_I2C_PIN_D4 4
#define LCD_I2C_PIN_D5 5
#define LCD_I2C_PIN_D6 6
#define LCD_I2C_PIN_D7 7
#include <Wire.h>
#include <LCD.h>
#include <LiquidCrystal_I2C.h>
#define LCD_CLASS LiquidCrystal_I2C
LCD_CLASS lcd(LCD_I2C_ADDRESS,LCD_I2C_PIN_EN,LCD_I2C_PIN_RW,LCD_I2C_PIN_RS,LCD_I2C_PIN_D4,LCD_I2C_PIN_D5,LCD_I2C_PIN_D6,LCD_I2C_PIN_D7);
#elif defined(LCD_I2C_TYPE_MCP23017)
//for the LED indicators (which maybe mapped to different things in lcd_implementation_update_indicators())
#define LED_A 0x04 //100
#define LED_B 0x02 //010
#define LED_C 0x01 //001
#define LCD_HAS_STATUS_INDICATORS
#include <Wire.h>
#include <LiquidTWI2.h>
#define LCD_CLASS LiquidTWI2
LCD_CLASS lcd(LCD_I2C_ADDRESS);
#elif defined(LCD_I2C_TYPE_MCP23008)
#include <Wire.h>
#include <LiquidTWI2.h>
#define LCD_CLASS LiquidTWI2
LCD_CLASS lcd(LCD_I2C_ADDRESS);
#elif defined(LCD_I2C_TYPE_PCA8574)
#include <LiquidCrystal_I2C.h>
#define LCD_CLASS LiquidCrystal_I2C
LCD_CLASS lcd(LCD_I2C_ADDRESS, LCD_WIDTH, LCD_HEIGHT);
#else
// Standard directly connected LCD implementations
#if LANGUAGE_CHOICE == 6
#include "LiquidCrystalRus.h"
#define LCD_CLASS LiquidCrystalRus
#else
#include <LiquidCrystal.h>
#define LCD_CLASS LiquidCrystal
#endif
LCD_CLASS lcd(LCD_PINS_RS, LCD_PINS_ENABLE, LCD_PINS_D4, LCD_PINS_D5,LCD_PINS_D6,LCD_PINS_D7); //RS,Enable,D4,D5,D6,D7
#endif #endif
/* Custom characters defined in the first 8 characters of the LCD */ /* Custom characters defined in the first 8 characters of the LCD */
@ -25,7 +209,6 @@
#define LCD_STR_CLOCK "\x07" #define LCD_STR_CLOCK "\x07"
#define LCD_STR_ARROW_RIGHT "\x7E" /* from the default character set */ #define LCD_STR_ARROW_RIGHT "\x7E" /* from the default character set */
LCD_CLASS lcd(LCD_PINS_RS, LCD_PINS_ENABLE, LCD_PINS_D4, LCD_PINS_D5,LCD_PINS_D6,LCD_PINS_D7); //RS,Enable,D4,D5,D6,D7
static void lcd_implementation_init() static void lcd_implementation_init()
{ {
byte bedTemp[8] = byte bedTemp[8] =
@ -111,7 +294,31 @@ static void lcd_implementation_init()
B00000, B00000,
B00000 B00000
}; //thanks Sonny Mounicou }; //thanks Sonny Mounicou
#if defined(LCDI2C_TYPE_PCF8575)
lcd.begin(LCD_WIDTH, LCD_HEIGHT); lcd.begin(LCD_WIDTH, LCD_HEIGHT);
#ifdef LCD_I2C_PIN_BL
lcd.setBacklightPin(LCD_I2C_PIN_BL,POSITIVE);
lcd.setBacklight(HIGH);
#endif
#elif defined(LCD_I2C_TYPE_MCP23017)
lcd.setMCPType(LTI_TYPE_MCP23017);
lcd.begin(LCD_WIDTH, LCD_HEIGHT);
lcd.setBacklight(0); //set all the LEDs off to begin with
#elif defined(LCD_I2C_TYPE_MCP23008)
lcd.setMCPType(LTI_TYPE_MCP23008);
lcd.begin(LCD_WIDTH, LCD_HEIGHT);
#elif defined(LCD_I2C_TYPE_PCA8574)
lcd.init();
lcd.backlight();
#else
lcd.begin(LCD_WIDTH, LCD_HEIGHT);
#endif
lcd.createChar(LCD_STR_BEDTEMP[0], bedTemp); lcd.createChar(LCD_STR_BEDTEMP[0], bedTemp);
lcd.createChar(LCD_STR_DEGREE[0], degree); lcd.createChar(LCD_STR_DEGREE[0], degree);
lcd.createChar(LCD_STR_THERMOMETER[0], thermometer); lcd.createChar(LCD_STR_THERMOMETER[0], thermometer);
@ -299,13 +506,13 @@ static void lcd_implementation_drawmenu_generic(uint8_t row, const char* pstr, c
char c; char c;
//Use all characters in narrow LCDs //Use all characters in narrow LCDs
#if LCD_WIDTH < 20 #if LCD_WIDTH < 20
uint8_t n = LCD_WIDTH - 1 - 1; uint8_t n = LCD_WIDTH - 1 - 1;
#else #else
uint8_t n = LCD_WIDTH - 1 - 2; uint8_t n = LCD_WIDTH - 1 - 2;
#endif #endif
lcd.setCursor(0, row); lcd.setCursor(0, row);
lcd.print(pre_char); lcd.print(pre_char);
while((c = pgm_read_byte(pstr)) != '\0') while( ((c = pgm_read_byte(pstr)) != '\0') && (n>0) )
{ {
lcd.print(c); lcd.print(c);
pstr++; pstr++;
@ -321,13 +528,13 @@ static void lcd_implementation_drawmenu_setting_edit_generic(uint8_t row, const
char c; char c;
//Use all characters in narrow LCDs //Use all characters in narrow LCDs
#if LCD_WIDTH < 20 #if LCD_WIDTH < 20
uint8_t n = LCD_WIDTH - 1 - 1 - strlen(data); uint8_t n = LCD_WIDTH - 1 - 1 - strlen(data);
#else #else
uint8_t n = LCD_WIDTH - 1 - 2 - strlen(data); uint8_t n = LCD_WIDTH - 1 - 2 - strlen(data);
#endif #endif
lcd.setCursor(0, row); lcd.setCursor(0, row);
lcd.print(pre_char); lcd.print(pre_char);
while((c = pgm_read_byte(pstr)) != '\0') while( ((c = pgm_read_byte(pstr)) != '\0') && (n>0) )
{ {
lcd.print(c); lcd.print(c);
pstr++; pstr++;
@ -343,13 +550,13 @@ static void lcd_implementation_drawmenu_setting_edit_generic_P(uint8_t row, cons
char c; char c;
//Use all characters in narrow LCDs //Use all characters in narrow LCDs
#if LCD_WIDTH < 20 #if LCD_WIDTH < 20
uint8_t n = LCD_WIDTH - 1 - 1 - strlen_P(data); uint8_t n = LCD_WIDTH - 1 - 1 - strlen_P(data);
#else #else
uint8_t n = LCD_WIDTH - 1 - 2 - strlen_P(data); uint8_t n = LCD_WIDTH - 1 - 2 - strlen_P(data);
#endif #endif
lcd.setCursor(0, row); lcd.setCursor(0, row);
lcd.print(pre_char); lcd.print(pre_char);
while((c = pgm_read_byte(pstr)) != '\0') while( ((c = pgm_read_byte(pstr)) != '\0') && (n>0) )
{ {
lcd.print(c); lcd.print(c);
pstr++; pstr++;
@ -402,9 +609,9 @@ void lcd_implementation_drawedit(const char* pstr, char* value)
lcd_printPGM(pstr); lcd_printPGM(pstr);
lcd.print(':'); lcd.print(':');
#if LCD_WIDTH < 20 #if LCD_WIDTH < 20
lcd.setCursor(LCD_WIDTH - strlen(value), 1); lcd.setCursor(LCD_WIDTH - strlen(value), 1);
#else #else
lcd.setCursor(LCD_WIDTH -1 - strlen(value), 1); lcd.setCursor(LCD_WIDTH -1 - strlen(value), 1);
#endif #endif
lcd.print(value); lcd.print(value);
} }
@ -419,7 +626,7 @@ static void lcd_implementation_drawmenu_sdfile_selected(uint8_t row, const char*
filename = longFilename; filename = longFilename;
longFilename[LCD_WIDTH-1] = '\0'; longFilename[LCD_WIDTH-1] = '\0';
} }
while((c = *filename) != '\0') while( ((c = *filename) != '\0') && (n>0) )
{ {
lcd.print(c); lcd.print(c);
filename++; filename++;
@ -439,7 +646,7 @@ static void lcd_implementation_drawmenu_sdfile(uint8_t row, const char* pstr, co
filename = longFilename; filename = longFilename;
longFilename[LCD_WIDTH-1] = '\0'; longFilename[LCD_WIDTH-1] = '\0';
} }
while((c = *filename) != '\0') while( ((c = *filename) != '\0') && (n>0) )
{ {
lcd.print(c); lcd.print(c);
filename++; filename++;
@ -460,7 +667,7 @@ static void lcd_implementation_drawmenu_sddirectory_selected(uint8_t row, const
filename = longFilename; filename = longFilename;
longFilename[LCD_WIDTH-2] = '\0'; longFilename[LCD_WIDTH-2] = '\0';
} }
while((c = *filename) != '\0') while( ((c = *filename) != '\0') && (n>0) )
{ {
lcd.print(c); lcd.print(c);
filename++; filename++;
@ -481,7 +688,7 @@ static void lcd_implementation_drawmenu_sddirectory(uint8_t row, const char* pst
filename = longFilename; filename = longFilename;
longFilename[LCD_WIDTH-2] = '\0'; longFilename[LCD_WIDTH-2] = '\0';
} }
while((c = *filename) != '\0') while( ((c = *filename) != '\0') && (n>0) )
{ {
lcd.print(c); lcd.print(c);
filename++; filename++;
@ -501,15 +708,50 @@ static void lcd_implementation_drawmenu_sddirectory(uint8_t row, const char* pst
static void lcd_implementation_quick_feedback() static void lcd_implementation_quick_feedback()
{ {
#if BEEPER > -1 #ifdef LCD_USE_I2C_BUZZER
lcd.buzz(60,1000/6);
#elif defined(BEEPER) && BEEPER > -1
SET_OUTPUT(BEEPER); SET_OUTPUT(BEEPER);
for(int8_t i=0;i<10;i++) for(int8_t i=0;i<10;i++)
{ {
WRITE(BEEPER,HIGH); WRITE(BEEPER,HIGH);
delay(3); delayMicroseconds(100);
WRITE(BEEPER,LOW); WRITE(BEEPER,LOW);
delay(3); delayMicroseconds(100);
} }
#endif #endif
} }
#ifdef LCD_HAS_STATUS_INDICATORS
static void lcd_implementation_update_indicators()
{
#if defined(LCD_I2C_PANELOLU2) || defined(LCD_I2C_VIKI)
//set the LEDS - referred to as backlights by the LiquidTWI2 library
static uint8_t ledsprev = 0;
uint8_t leds = 0;
if (target_temperature_bed > 0) leds |= LED_A;
if (target_temperature[0] > 0) leds |= LED_B;
if (fanSpeed) leds |= LED_C;
#if EXTRUDERS > 1
if (target_temperature[1] > 0) leds |= LED_C;
#endif
if (leds != ledsprev) {
lcd.setBacklight(leds);
ledsprev = leds;
}
#endif
}
#endif
#ifdef LCD_HAS_SLOW_BUTTONS
static uint8_t lcd_implementation_read_slow_buttons()
{
#ifdef LCD_I2C_TYPE_MCP23017
// Reading these buttons this is likely to be too slow to call inside interrupt context
// so they are called during normal lcd_update
return lcd.readButtons() << B_I2C_BTN_OFFSET;
#endif
}
#endif
#endif//ULTRA_LCD_IMPLEMENTATION_HITACHI_HD44780_H #endif//ULTRA_LCD_IMPLEMENTATION_HITACHI_HD44780_H

131
Marlin/ultralcd_st7920_u8glib_rrd.h Normal file
View file

@ -0,0 +1,131 @@
#ifndef ULCDST7920_H
#define ULCDST7920_H
#include "Marlin.h"
#ifdef U8GLIB_ST7920
//set optimization so ARDUINO optimizes this file
#pragma GCC optimize (3)
#define ST7920_CLK_PIN LCD_PINS_D4
#define ST7920_DAT_PIN LCD_PINS_ENABLE
#define ST7920_CS_PIN LCD_PINS_RS
//#define PAGE_HEIGHT 8 //128 byte frambuffer
//#define PAGE_HEIGHT 16 //256 byte frambuffer
#define PAGE_HEIGHT 32 //512 byte framebuffer
#define WIDTH 128
#define HEIGHT 64
#include <U8glib.h>
static void ST7920_SWSPI_SND_8BIT(uint8_t val)
{
uint8_t i;
for( i=0; i<8; i++ )
{
WRITE(ST7920_CLK_PIN,0);
WRITE(ST7920_DAT_PIN,val&0x80);
val<<=1;
WRITE(ST7920_CLK_PIN,1);
}
}
#define ST7920_CS() {WRITE(ST7920_CS_PIN,1);u8g_10MicroDelay();}
#define ST7920_NCS() {WRITE(ST7920_CS_PIN,0);}
#define ST7920_SET_CMD() {ST7920_SWSPI_SND_8BIT(0xf8);u8g_10MicroDelay();}
#define ST7920_SET_DAT() {ST7920_SWSPI_SND_8BIT(0xfa);u8g_10MicroDelay();}
#define ST7920_WRITE_BYTE(a) {ST7920_SWSPI_SND_8BIT((a)&0xf0);ST7920_SWSPI_SND_8BIT((a)<<4);u8g_10MicroDelay();}
#define ST7920_WRITE_BYTES(p,l) {uint8_t i;for(i=0;i<l;i++){ST7920_SWSPI_SND_8BIT(*p&0xf0);ST7920_SWSPI_SND_8BIT(*p<<4);p++;}u8g_10MicroDelay();}
uint8_t u8g_dev_rrd_st7920_128x64_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
{
uint8_t i,y;
switch(msg)
{
case U8G_DEV_MSG_INIT:
{
SET_OUTPUT(ST7920_CS_PIN);
WRITE(ST7920_CS_PIN,0);
SET_OUTPUT(ST7920_DAT_PIN);
WRITE(ST7920_DAT_PIN,0);
SET_OUTPUT(ST7920_CLK_PIN);
WRITE(ST7920_CLK_PIN,1);
ST7920_CS();
u8g_Delay(90); //initial delay for boot up
ST7920_SET_CMD();
ST7920_WRITE_BYTE(0x08); //display off, cursor+blink off
ST7920_WRITE_BYTE(0x01); //clear CGRAM ram
u8g_Delay(10); //delay for cgram clear
ST7920_WRITE_BYTE(0x3E); //extended mode + gdram active
for(y=0;y<HEIGHT/2;y++) //clear GDRAM
{
ST7920_WRITE_BYTE(0x80|y); //set y
ST7920_WRITE_BYTE(0x80); //set x = 0
ST7920_SET_DAT();
for(i=0;i<2*WIDTH/8;i++) //2x width clears both segments
ST7920_WRITE_BYTE(0);
ST7920_SET_CMD();
}
ST7920_WRITE_BYTE(0x0C); //display on, cursor+blink off
ST7920_NCS();
}
break;
case U8G_DEV_MSG_STOP:
break;
case U8G_DEV_MSG_PAGE_NEXT:
{
uint8_t *ptr;
u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
y = pb->p.page_y0;
ptr = (uint8_t*)pb->buf;
ST7920_CS();
for( i = 0; i < PAGE_HEIGHT; i ++ )
{
ST7920_SET_CMD();
if ( y < 32 )
{
ST7920_WRITE_BYTE(0x80 | y); //y
ST7920_WRITE_BYTE(0x80); //x=0
}
else
{
ST7920_WRITE_BYTE(0x80 | (y-32)); //y
ST7920_WRITE_BYTE(0x80 | 8); //x=64
}
ST7920_SET_DAT();
ST7920_WRITE_BYTES(ptr,WIDTH/8); //ptr is incremented inside of macro
y++;
}
ST7920_NCS();
}
break;
}
#if PAGE_HEIGHT == 8
return u8g_dev_pb8h1_base_fn(u8g, dev, msg, arg);
#elif PAGE_HEIGHT == 16
return u8g_dev_pb16h1_base_fn(u8g, dev, msg, arg);
#else
return u8g_dev_pb32h1_base_fn(u8g, dev, msg, arg);
#endif
}
uint8_t u8g_dev_st7920_128x64_rrd_buf[WIDTH*(PAGE_HEIGHT/8)] U8G_NOCOMMON;
u8g_pb_t u8g_dev_st7920_128x64_rrd_pb = {{PAGE_HEIGHT,HEIGHT,0,0,0},WIDTH,u8g_dev_st7920_128x64_rrd_buf};
u8g_dev_t u8g_dev_st7920_128x64_rrd_sw_spi = {u8g_dev_rrd_st7920_128x64_fn,&u8g_dev_st7920_128x64_rrd_pb,&u8g_com_null_fn};
class U8GLIB_ST7920_128X64_RRD : public U8GLIB
{
public:
U8GLIB_ST7920_128X64_RRD(uint8_t dummy) : U8GLIB(&u8g_dev_st7920_128x64_rrd_sw_spi) {}
};
#endif //U8GLIB_ST7920
#endif //ULCDST7920_H

185
README.md
View file

@ -1,12 +1,8 @@
WARNING: ==========================
-------- Marlin 3D Printer Firmware
THIS IS RELEASE CANDIDATE 2 FOR MARLIN 1.0.0 ==========================
The configuration is now split in two files [![Flattr this git repo](http://api.flattr.com/button/flattr-badge-large.png)](https://flattr.com/submit/auto?user_id=ErikZalm&url=https://github.com/ErikZalm/Marlin&title=Marlin&language=&tags=github&category=software)
Configuration.h for the normal settings
Configuration_adv.h for the advanced settings
Gen7T is not supported.
Quick Information Quick Information
=================== ===================
@ -26,14 +22,14 @@ Features:
* High steprate * High steprate
* Look ahead (Keep the speed high when possible. High cornering speed) * Look ahead (Keep the speed high when possible. High cornering speed)
* Interrupt based temperature protection * Interrupt based temperature protection
* preliminary support for Matthew Roberts advance algorithm * preliminary support for Matthew Roberts advance algorithm
For more info see: http://reprap.org/pipermail/reprap-dev/2011-May/003323.html For more info see: http://reprap.org/pipermail/reprap-dev/2011-May/003323.html
* Full endstop support * Full endstop support
* SD Card support * SD Card support
* SD Card folders (works in pronterface) * SD Card folders (works in pronterface)
* SD Card autostart support * SD Card autostart support
* LCD support (ideally 20x4) * LCD support (ideally 20x4)
* LCD menu system for autonomous SD card printing, controlled by an click-encoder. * LCD menu system for autonomous SD card printing, controlled by an click-encoder.
* EEPROM storage of e.g. max-velocity, max-acceleration, and similar variables * EEPROM storage of e.g. max-velocity, max-acceleration, and similar variables
* many small but handy things originating from bkubicek's fork. * many small but handy things originating from bkubicek's fork.
* Arc support * Arc support
@ -45,7 +41,11 @@ Features:
* Heater power reporting. Useful for PID monitoring. * Heater power reporting. Useful for PID monitoring.
* PID tuning * PID tuning
* CoreXY kinematics (www.corexy.com/theory.html) * CoreXY kinematics (www.corexy.com/theory.html)
* Delta kinematics
* Dual X-carriage support for multiple extruder systems
* Configurable serial port to support connection of wireless adaptors. * Configurable serial port to support connection of wireless adaptors.
* Automatic operation of extruder/cold-end cooling fans based on nozzle temperature
* RC Servo Support, specify angle or duration for continuous rotation servos.
The default baudrate is 250000. This baudrate has less jitter and hence errors than the usual 115200 baud, but is less supported by drivers and host-environments. The default baudrate is 250000. This baudrate has less jitter and hence errors than the usual 115200 baud, but is less supported by drivers and host-environments.
@ -55,17 +55,17 @@ Differences and additions to the already good Sprinter firmware:
*Look-ahead:* *Look-ahead:*
Marlin has look-ahead. While sprinter has to break and re-accelerate at each corner, Marlin has look-ahead. While sprinter has to break and re-accelerate at each corner,
lookahead will only decelerate and accelerate to a velocity, lookahead will only decelerate and accelerate to a velocity,
so that the change in vectorial velocity magnitude is less than the xy_jerk_velocity. so that the change in vectorial velocity magnitude is less than the xy_jerk_velocity.
This is only possible, if some future moves are already processed, hence the name. This is only possible, if some future moves are already processed, hence the name.
It leads to less over-deposition at corners, especially at flat angles. It leads to less over-deposition at corners, especially at flat angles.
*Arc support:* *Arc support:*
Slic3r can find curves that, although broken into segments, were ment to describe an arc. Slic3r can find curves that, although broken into segments, were ment to describe an arc.
Marlin is able to print those arcs. The advantage is the firmware can choose the resolution, Marlin is able to print those arcs. The advantage is the firmware can choose the resolution,
and can perform the arc with nearly constant velocity, resulting in a nice finish. and can perform the arc with nearly constant velocity, resulting in a nice finish.
Also, less serial communication is needed. Also, less serial communication is needed.
*Temperature Oversampling:* *Temperature Oversampling:*
@ -94,7 +94,7 @@ After each reboot, it will magically load them from EEPROM, independent what you
If your hardware supports it, you can build yourself a LCD-CardReader+Click+encoder combination. It will enable you to realtime tune temperatures, If your hardware supports it, you can build yourself a LCD-CardReader+Click+encoder combination. It will enable you to realtime tune temperatures,
accelerations, velocities, flow rates, select and print files from the SD card, preheat, disable the steppers, and do other fancy stuff. accelerations, velocities, flow rates, select and print files from the SD card, preheat, disable the steppers, and do other fancy stuff.
One working hardware is documented here: http://www.thingiverse.com/thing:12663 One working hardware is documented here: http://www.thingiverse.com/thing:12663
Also, with just a 20x4 or 16x2 display, useful data is shown. Also, with just a 20x4 or 16x2 display, useful data is shown.
*SD card folders:* *SD card folders:*
@ -129,57 +129,98 @@ necessary for backwards compatibility.
An interrupt is used to manage ADC conversions, and enforce checking for critical temperatures. An interrupt is used to manage ADC conversions, and enforce checking for critical temperatures.
This leads to less blocking in the heater management routine. This leads to less blocking in the heater management routine.
Implemented G Codes:
====================
Non-standard M-Codes, different to an old version of sprinter: * G0 -> G1
============================================================== * G1 - Coordinated Movement X Y Z E
Movement: * G2 - CW ARC
* G3 - CCW ARC
* G4 - Dwell S<seconds> or P<milliseconds>
* G10 - retract filament according to settings of M207
* G11 - retract recover filament according to settings of M208
* G28 - Home all Axis
* G90 - Use Absolute Coordinates
* G91 - Use Relative Coordinates
* G92 - Set current position to cordinates given
* G2 - CW ARC M Codes
* G3 - CCW ARC * M0 - Unconditional stop - Wait for user to press a button on the LCD (Only if ULTRA_LCD is enabled)
* M1 - Same as M0
* M17 - Enable/Power all stepper motors
* M18 - Disable all stepper motors; same as M84
* M20 - List SD card
* M21 - Init SD card
* M22 - Release SD card
* M23 - Select SD file (M23 filename.g)
* M24 - Start/resume SD print
* M25 - Pause SD print
* M26 - Set SD position in bytes (M26 S12345)
* M27 - Report SD print status
* M28 - Start SD write (M28 filename.g)
* M29 - Stop SD write
* M30 - Delete file from SD (M30 filename.g)
* M31 - Output time since last M109 or SD card start to serial
* M32 - Select file and start SD print (Can be used when printing from SD card)
* M42 - Change pin status via gcode Use M42 Px Sy to set pin x to value y, when omitting Px the onboard led will be used.
* M80 - Turn on Power Supply
* M81 - Turn off Power Supply
* M82 - Set E codes absolute (default)
* M83 - Set E codes relative while in Absolute Coordinates (G90) mode
* M84 - Disable steppers until next move, or use S<seconds> to specify an inactivity timeout, after which the steppers will be disabled. S0 to disable the timeout.
* M85 - Set inactivity shutdown timer with parameter S<seconds>. To disable set zero (default)
* M92 - Set axis_steps_per_unit - same syntax as G92
* M104 - Set extruder target temp
* M105 - Read current temp
* M106 - Fan on
* M107 - Fan off
* M109 - Sxxx Wait for extruder current temp to reach target temp. Waits only when heating
* Rxxx Wait for extruder current temp to reach target temp. Waits when heating and cooling
* M114 - Output current position to serial port
* M115 - Capabilities string
* M117 - display message
* M119 - Output Endstop status to serial port
* M126 - Solenoid Air Valve Open (BariCUDA support by jmil)
* M127 - Solenoid Air Valve Closed (BariCUDA vent to atmospheric pressure by jmil)
* M128 - EtoP Open (BariCUDA EtoP = electricity to air pressure transducer by jmil)
* M129 - EtoP Closed (BariCUDA EtoP = electricity to air pressure transducer by jmil)
* M140 - Set bed target temp
* M190 - Sxxx Wait for bed current temp to reach target temp. Waits only when heating
* Rxxx Wait for bed current temp to reach target temp. Waits when heating and cooling
* M200 - Set filament diameter
* M201 - Set max acceleration in units/s^2 for print moves (M201 X1000 Y1000)
* M202 - Set max acceleration in units/s^2 for travel moves (M202 X1000 Y1000) Unused in Marlin!!
* M203 - Set maximum feedrate that your machine can sustain (M203 X200 Y200 Z300 E10000) in mm/sec
* M204 - Set default acceleration: S normal moves T filament only moves (M204 S3000 T7000) im mm/sec^2 also sets minimum segment time in ms (B20000) to prevent buffer underruns and M20 minimum feedrate
* M205 - advanced settings: minimum travel speed S=while printing T=travel only, B=minimum segment time X= maximum xy jerk, Z=maximum Z jerk, E=maximum E jerk
* M206 - set additional homeing offset
* M207 - set retract length S[positive mm] F[feedrate mm/sec] Z[additional zlift/hop]
* M208 - set recover=unretract length S[positive mm surplus to the M207 S*] F[feedrate mm/sec]
* M209 - S<1=true/0=false> enable automatic retract detect if the slicer did not support G10/11: every normal extrude-only move will be classified as retract depending on the direction.
* M218 - set hotend offset (in mm): T<extruder_number> X<offset_on_X> Y<offset_on_Y>
* M220 S<factor in percent>- set speed factor override percentage
* M221 S<factor in percent>- set extrude factor override percentage
* M240 - Trigger a camera to take a photograph
* M280 - Position an RC Servo P<index> S<angle/microseconds>, ommit S to report back current angle
* M300 - Play beepsound S<frequency Hz> P<duration ms>
* M301 - Set PID parameters P I and D
* M302 - Allow cold extrudes
* M303 - PID relay autotune S<temperature> sets the target temperature. (default target temperature = 150C)
* M304 - Set bed PID parameters P I and D
* M400 - Finish all moves
* M500 - stores paramters in EEPROM
* M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
* M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
* M503 - print the current settings (from memory not from eeprom)
* M540 - Use S[0|1] to enable or disable the stop SD card print on endstop hit (requires ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED)
* M600 - Pause for filament change X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal]
* M907 - Set digital trimpot motor current using axis codes.
* M908 - Control digital trimpot directly.
* M350 - Set microstepping mode.
* M351 - Toggle MS1 MS2 pins directly.
* M928 - Start SD logging (M928 filename.g) - ended by M29
* M999 - Restart after being stopped by error
General:
* M17 - Enable/Power all stepper motors. Compatibility to ReplicatorG.
* M18 - Disable all stepper motors; same as M84.Compatibility to ReplicatorG.
* M30 - Print time since last M109 or SD card start to serial
* M42 - Change pin status via gcode
* M80 - Turn on Power Supply
* M81 - Turn off Power Supply
* M114 - Output current position to serial port
* M119 - Output Endstop status to serial port
Movement variables:
* M202 - Set max acceleration in units/s^2 for travel moves (M202 X1000 Y1000) Unused in Marlin!!
* M203 - Set maximum feedrate that your machine can sustain (M203 X200 Y200 Z300 E10000) in mm/sec
* M204 - Set default acceleration: S normal moves T filament only moves (M204 S3000 T7000) im mm/sec^2 also sets minimum segment time in ms (B20000) to prevent buffer underruns and M20 minimum feedrate
* M206 - set home offsets. This sets the X,Y,Z coordinates of the endstops (and is added to the {X,Y,Z}_HOME_POS configuration options (and is also added to the coordinates, if any, provided to G82, as with earlier firmware)
* M220 - set build speed mulitplying S:factor in percent ; aka "realtime tuneing in the gcode". So you can slow down if you have islands in one height-range, and speed up otherwise.
* M221 - set the extrude multiplying S:factor in percent
* M400 - Finish all buffered moves.
Temperature variables:
* M301 - Set PID parameters P I and D
* M302 - Allow cold extrudes
* M303 - PID relay autotune S<temperature> sets the target temperature. (default target temperature = 150C)
Advance:
* M200 - Set filament diameter for advance
* M205 - advanced settings: minimum travel speed S=while printing T=travel only, B=minimum segment time X= maximum xy jerk, Z=maximum Z jerk
EEPROM:
* M500 - stores paramters in EEPROM. This parameters are stored: axis_steps_per_unit, max_feedrate, max_acceleration ,acceleration,retract_acceleration,
minimumfeedrate,mintravelfeedrate,minsegmenttime, jerk velocities, PID
* M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
* M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
* M503 - print the current settings (from memory not from eeprom)
MISC:
* M240 - Trigger a camera to take a photograph
* M999 - Restart after being stopped by error
Configuring and compilation: Configuring and compilation:
============================ ============================
@ -190,12 +231,7 @@ Install the arduino software IDE/toolset v23 (Some configurations also work with
For gen6/gen7 and sanguinololu the Sanguino directory in the Marlin dir needs to be copied to the arduino environment. For gen6/gen7 and sanguinololu the Sanguino directory in the Marlin dir needs to be copied to the arduino environment.
copy ArduinoAddons\Arduino_x.x.x\sanguino <arduino home>\hardware\Sanguino copy ArduinoAddons\Arduino_x.x.x\sanguino <arduino home>\hardware\Sanguino
Install Ultimaker's RepG 25 build Copy the Marlin firmware
http://software.ultimaker.com
For SD handling and as better substitute (apart from stl manipulation) download
the very nice Kliment's printrun/pronterface https://github.com/kliment/Printrun
Copy the Ultimaker Marlin firmware
https://github.com/ErikZalm/Marlin/tree/Marlin_v1 https://github.com/ErikZalm/Marlin/tree/Marlin_v1
(Use the download button) (Use the download button)
@ -209,15 +245,8 @@ Click the Verify/Compile button
Click the Upload button Click the Upload button
If all goes well the firmware is uploading If all goes well the firmware is uploading
Start Ultimaker's Custom RepG 25
Make sure Show Experimental Profiles is enabled in Preferences
Select Sprinter as the Driver
Press the Connect button.
KNOWN ISSUES: RepG will display: Unknown: marlin x.y.z
That's ok. Enjoy Silky Smooth Printing. That's ok. Enjoy Silky Smooth Printing.