Use LCD conditionals in pins files (#14428)

This commit is contained in:
Scott Lahteine 2019-06-27 22:14:43 -05:00 committed by GitHub
parent 8b63e3701f
commit 7e16835c83
Signed by: GitHub
GPG key ID: 4AEE18F83AFDEB23
51 changed files with 193 additions and 203 deletions

View file

@ -1093,7 +1093,7 @@ void setup() {
init_closedloop(); init_closedloop();
#endif #endif
#if ENABLED(INIT_SDCARD_ON_BOOT) && DISABLED(ULTRA_LCD) #if ENABLED(INIT_SDCARD_ON_BOOT) && !HAS_SPI_LCD
card.beginautostart(); card.beginautostart();
#endif #endif

View file

@ -878,6 +878,8 @@
#ifndef LCD_PINS_D4 #ifndef LCD_PINS_D4
#define LCD_PINS_D4 -1 #define LCD_PINS_D4 -1
#endif #endif
#if HAS_CHARACTER_LCD
#ifndef LCD_PINS_D5 #ifndef LCD_PINS_D5
#define LCD_PINS_D5 -1 #define LCD_PINS_D5 -1
#endif #endif
@ -887,6 +889,11 @@
#ifndef LCD_PINS_D7 #ifndef LCD_PINS_D7
#define LCD_PINS_D7 -1 #define LCD_PINS_D7 -1
#endif #endif
#else
#undef LCD_PINS_D5
#undef LCD_PINS_D6
#undef LCD_PINS_D7
#endif
/** /**
* Auto-Assignment for Dual X, Dual Y, Multi-Z Steppers * Auto-Assignment for Dual X, Dual Y, Multi-Z Steppers

View file

@ -103,7 +103,7 @@
#define BEEPER_PIN 33 #define BEEPER_PIN 33
#endif // ULTRA_LCD && NEWPANEL #endif // HAS_SPI_LCD && NEWPANEL
/** /**
* M3/M4/M5 - Spindle/Laser Control * M3/M4/M5 - Spindle/Laser Control

View file

@ -151,7 +151,7 @@
* REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER * REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
*/ */
#if ENABLED(ULTRA_LCD) #if HAS_SPI_LCD
#define LCD_SDSS 28 #define LCD_SDSS 28
#if ENABLED(ADC_KEYPAD) #if ENABLED(ADC_KEYPAD)
#define SERVO0_PIN 27 // free for BLTouch/3D-Touch #define SERVO0_PIN 27 // free for BLTouch/3D-Touch

View file

@ -175,7 +175,7 @@
// //
// LCD / Controller // LCD / Controller
// //
#if ENABLED(ULTRA_LCD) #if HAS_SPI_LCD
#define BEEPER_PIN 23 // D24 PA15_CTS1 #define BEEPER_PIN 23 // D24 PA15_CTS1
#define LCD_PINS_RS 17 // D17 PA12_RXD1 #define LCD_PINS_RS 17 // D17 PA12_RXD1
#define LCD_PINS_ENABLE 24 // D23 PA14_RTS1 #define LCD_PINS_ENABLE 24 // D23 PA14_RTS1
@ -192,4 +192,4 @@
#define BTN_EN2 13 // D13 PB27_TIOB0 #define BTN_EN2 13 // D13 PB27_TIOB0
#define BTN_ENC 16 // D16 PA13_TXD1 #define BTN_ENC 16 // D16 PA13_TXD1
#endif // NEWPANEL #endif // NEWPANEL
#endif // ULTRA_LCD #endif // HAS_SPI_LCD

View file

@ -224,7 +224,7 @@
// //
// LCD / Controller // LCD / Controller
// //
#if ENABLED(ULTRA_LCD) #if HAS_SPI_LCD
#define BEEPER_PIN 23 // D24 PA15_CTS1 #define BEEPER_PIN 23 // D24 PA15_CTS1
#define LCD_PINS_RS 17 // D17 PA12_RXD1 #define LCD_PINS_RS 17 // D17 PA12_RXD1
#define LCD_PINS_ENABLE 24 // D23 PA14_RTS1 #define LCD_PINS_ENABLE 24 // D23 PA14_RTS1
@ -241,4 +241,4 @@
#define BTN_EN2 13 // D13 PB27_TIOB0 #define BTN_EN2 13 // D13 PB27_TIOB0
#define BTN_ENC 16 // D16 PA13_TXD1 // the click #define BTN_ENC 16 // D16 PA13_TXD1 // the click
#endif // NEWPANEL #endif // NEWPANEL
#endif // ULTRA_LCD #endif // HAS_SPI_LCD

View file

@ -108,7 +108,7 @@
// //
// Display // Display
// //
#if ENABLED(ULTRA_LCD) #if HAS_SPI_LCD
#if ENABLED(CR10_STOCKDISPLAY) #if ENABLED(CR10_STOCKDISPLAY)
@ -184,7 +184,7 @@
#endif #endif
#endif // ULTRA_LCD #endif // HAS_SPI_LCD
// //
// SD Support // SD Support

View file

@ -120,7 +120,7 @@
// //
// LCD Pins // LCD Pins
// //
#if ENABLED(ULTRA_LCD) #if HAS_SPI_LCD
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
#define LCD_PINS_RS 49 // CS chip select /SS chip slave select #define LCD_PINS_RS 49 // CS chip select /SS chip slave select
@ -282,7 +282,7 @@
#endif #endif
#endif // NEWPANEL #endif // NEWPANEL
#endif // ULTRA_LCD #endif // HAS_SPI_LCD
#define U_MIN_PIN -1 #define U_MIN_PIN -1
#define V_MIN_PIN -1 #define V_MIN_PIN -1

View file

@ -102,7 +102,7 @@
* EXP2 EXP1 * EXP2 EXP1
*/ */
#if ENABLED(ULTRA_LCD) #if HAS_SPI_LCD
#define BEEPER_PIN PC10 #define BEEPER_PIN PC10
#define BTN_ENC PC11 #define BTN_ENC PC11
#define LCD_PINS_RS PC12 #define LCD_PINS_RS PC12
@ -152,7 +152,7 @@
#endif // !FYSETC_MINI_12864 #endif // !FYSETC_MINI_12864
#endif // ULTRA_LCD #endif // HAS_SPI_LCD
// //
// SD Card // SD Card

View file

@ -179,7 +179,7 @@
| |
| EXP2 EXP1 | EXP2 EXP1
*/ */
#if ENABLED(ULTRA_LCD) #if HAS_SPI_LCD
#define BEEPER_PIN P1_30 // (37) not 5V tolerant #define BEEPER_PIN P1_30 // (37) not 5V tolerant
#define BTN_ENC P0_28 // (58) open-drain #define BTN_ENC P0_28 // (58) open-drain
@ -249,7 +249,7 @@
#endif #endif
#endif // ULTRA_LCD #endif // HAS_SPI_LCD
// //
// SD Support // SD Support

View file

@ -119,7 +119,7 @@
* for the onboard SD card, and a chip select signal is not provided for the remote * for the onboard SD card, and a chip select signal is not provided for the remote
* SD card. * SD card.
*/ */
#if ENABLED(ULTRA_LCD) #if HAS_SPI_LCD
#define BEEPER_PIN P1_31 // EXP1-1 #define BEEPER_PIN P1_31 // EXP1-1
@ -132,15 +132,15 @@
#define LCD_PINS_ENABLE P0_18 // (MOSI) EXP1-3 #define LCD_PINS_ENABLE P0_18 // (MOSI) EXP1-3
#define LCD_PINS_D4 P0_15 // (SCK) EXP1-5 #define LCD_PINS_D4 P0_15 // (SCK) EXP1-5
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) && DISABLED(DOGLCD) #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) && HAS_CHARACTER_LCD
#error "REPRAP_DISCOUNT_SMART_CONTROLLER is not supported by the BIQU BQ111-A4" #error "REPRAP_DISCOUNT_SMART_CONTROLLER is not supported by the BIQU B300 v1.0"
#endif #endif
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
#error "SDSUPPORT is not supported by the BIQU BQ111-A4 when an LCD controller is used" #error "SDSUPPORT is not supported by the BIQU B300 v1.0 when an LCD controller is used"
#endif #endif
#endif // ULTRA_LCD #endif // HAS_SPI_LCD
/** /**
* SD Card Reader * SD Card Reader

View file

@ -99,7 +99,7 @@
* for the onboard SD card, and a chip select signal is not provided for the remote * for the onboard SD card, and a chip select signal is not provided for the remote
* SD card. * SD card.
*/ */
#if ENABLED(ULTRA_LCD) #if HAS_SPI_LCD
#define BEEPER_PIN P1_31 // EXP1-1 #define BEEPER_PIN P1_31 // EXP1-1
@ -112,7 +112,7 @@
#define LCD_PINS_ENABLE P0_18 // (MOSI) EXP1-3 #define LCD_PINS_ENABLE P0_18 // (MOSI) EXP1-3
#define LCD_PINS_D4 P0_15 // (SCK) EXP1-5 #define LCD_PINS_D4 P0_15 // (SCK) EXP1-5
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) && DISABLED(DOGLCD) #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) && HAS_CHARACTER_LCD
#error "REPRAP_DISCOUNT_SMART_CONTROLLER is not supported by the BIQU BQ111-A4" #error "REPRAP_DISCOUNT_SMART_CONTROLLER is not supported by the BIQU BQ111-A4"
#endif #endif
@ -120,7 +120,7 @@
#error "SDSUPPORT is not supported by the BIQU BQ111-A4 when an LCD controller is used" #error "SDSUPPORT is not supported by the BIQU BQ111-A4 when an LCD controller is used"
#endif #endif
#endif // ULTRA_LCD #endif // HAS_SPI_LCD
/** /**

View file

@ -94,7 +94,7 @@
* by redrawing the screen after SD card accesses. * by redrawing the screen after SD card accesses.
*/ */
#if ENABLED(ULTRA_LCD) #if HAS_SPI_LCD
#define BEEPER_PIN P1_30 #define BEEPER_PIN P1_30
#define BTN_EN1 P3_26 #define BTN_EN1 P3_26
#define BTN_EN2 P3_25 #define BTN_EN2 P3_25

View file

@ -119,7 +119,7 @@
// //
// LCD Pins // LCD Pins
// //
#if ENABLED(ULTRA_LCD) #if HAS_SPI_LCD
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
#define LCD_PINS_RS 49 // CS chip select /SS chip slave select #define LCD_PINS_RS 49 // CS chip select /SS chip slave select
@ -280,7 +280,7 @@
#endif #endif
#endif // NEWPANEL #endif // NEWPANEL
#endif // ULTRA_LCD #endif // HAS_SPI_LCD
#define U_MIN_PIN -1 #define U_MIN_PIN -1
#define V_MIN_PIN -1 #define V_MIN_PIN -1

View file

@ -135,7 +135,7 @@
// connector are shared with the onboard SD card, and Marlin does not support reading // connector are shared with the onboard SD card, and Marlin does not support reading
// G-code files from the onboard SD card. // G-code files from the onboard SD card.
// //
#if ENABLED(ULTRA_LCD) #if HAS_SPI_LCD
#define BEEPER_PIN P0_27 // EXP2-7 - open drain #define BEEPER_PIN P0_27 // EXP2-7 - open drain
@ -154,7 +154,7 @@
#error "SDSUPPORT is not currently supported by the Cohesion3D boards" #error "SDSUPPORT is not currently supported by the Cohesion3D boards"
#endif #endif
#endif // ULTRA_LCD #endif // HAS_SPI_LCD
// //
// Ethernet pins // Ethernet pins

View file

@ -192,7 +192,7 @@
#define NEOPIXEL_PIN P1_16 // EXP1-6 => Ethernet pin 6 (top row, 3 from left) #define NEOPIXEL_PIN P1_16 // EXP1-6 => Ethernet pin 6 (top row, 3 from left)
#endif #endif
#elif ENABLED(ULTRA_LCD) #elif HAS_SPI_LCD
#define BEEPER_PIN P1_31 // EXP1-1 #define BEEPER_PIN P1_31 // EXP1-1
//#define SD_DETECT_PIN P0_27 // EXP2-7 //#define SD_DETECT_PIN P0_27 // EXP2-7
@ -208,7 +208,7 @@
#define KILL_PIN P2_11 // EXP2-10 #define KILL_PIN P2_11 // EXP2-10
#endif // ULTRA_LCD #endif // HAS_SPI_LCD
// //
// SD Support // SD Support

View file

@ -112,7 +112,7 @@
// //
// LCD / Controller // LCD / Controller
// //
#if ENABLED(ULTRA_LCD) #if HAS_SPI_LCD
#define LCD_PINS_RS 42 #define LCD_PINS_RS 42
#define LCD_PINS_ENABLE 43 #define LCD_PINS_ENABLE 43
@ -167,4 +167,4 @@
#define BEEPER_PIN -1 #define BEEPER_PIN -1
#endif // SPARK_FULL_GRAPHICS #endif // SPARK_FULL_GRAPHICS
#endif // ULTRA_LCD #endif // HAS_SPI_LCD

View file

@ -104,7 +104,7 @@
// //
// LCD / Controller // LCD / Controller
// //
#if ENABLED(ULTRA_LCD) #if HAS_SPI_LCD
#define LCD_PINS_RS 42 #define LCD_PINS_RS 42
#define LCD_PINS_ENABLE 43 #define LCD_PINS_ENABLE 43
@ -170,4 +170,4 @@
#define DOGLCD_CS 45 #define DOGLCD_CS 45
#endif // SPARK_FULL_GRAPHICS #endif // SPARK_FULL_GRAPHICS
#endif // ULTRA_LCD #endif // HAS_SPI_LCD

View file

@ -86,7 +86,7 @@
// //
// LCDs and Controllers // LCDs and Controllers
// //
#if ENABLED(ULTRA_LCD) #if HAS_SPI_LCD
#if ENABLED(ZONESTAR_LCD) #if ENABLED(ZONESTAR_LCD)
#define LCD_PINS_RS 2 #define LCD_PINS_RS 2
#define LCD_PINS_ENABLE 36 #define LCD_PINS_ENABLE 36

View file

@ -148,7 +148,7 @@
// //
// LCD / Controller // LCD / Controller
// //
#if ENABLED(ULTRA_LCD) #if HAS_SPI_LCD
#define KILL_PIN 32 #define KILL_PIN 32
@ -176,4 +176,4 @@
#define SD_DETECT_PIN 15 #define SD_DETECT_PIN 15
#endif // NEWPANEL #endif // NEWPANEL
#endif // ULTRA_LCD #endif // HAS_SPI_LCD

View file

@ -162,7 +162,7 @@
// //
// LCD / Controller // LCD / Controller
// //
#if ENABLED(ULTRA_LCD) #if HAS_SPI_LCD
#define KILL_PIN 32 #define KILL_PIN 32
@ -190,4 +190,4 @@
#define SD_DETECT_PIN 15 #define SD_DETECT_PIN 15
#endif // NEWPANEL #endif // NEWPANEL
#endif // ULTRA_LCD #endif // HAS_SPI_LCD

View file

@ -121,7 +121,7 @@
// //
// LCD Pins // LCD Pins
// //
#if ENABLED(ULTRA_LCD) #if HAS_SPI_LCD
#define BEEPER_PIN PC9 #define BEEPER_PIN PC9

View file

@ -96,7 +96,7 @@
// //
// LCD Pins // LCD Pins
// //
#if ENABLED(ULTRA_LCD) #if HAS_SPI_LCD
#define BEEPER_PIN PC9 #define BEEPER_PIN PC9

View file

@ -95,7 +95,7 @@
#define SUICIDE_PIN 54 // Must be enabled at startup to keep power flowing #define SUICIDE_PIN 54 // Must be enabled at startup to keep power flowing
#define KILL_PIN -1 #define KILL_PIN -1
#if ENABLED(ULTRA_LCD) #if HAS_SPI_LCD
#define BEEPER_PIN 18 #define BEEPER_PIN 18
@ -138,4 +138,4 @@
#endif // !NEWPANEL #endif // !NEWPANEL
#endif // ULTRA_LCD #endif // HAS_SPI_LCD

View file

@ -108,7 +108,7 @@
// //
// LCD / Controller // LCD / Controller
// //
#if ENABLED(ULTRA_LCD) #if HAS_SPI_LCD
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#define LCD_PINS_RS PE6 // CS chip select /SS chip slave select #define LCD_PINS_RS PE6 // CS chip select /SS chip slave select
@ -142,7 +142,7 @@
//#define LCD_PINS_D14 PD9 // RXD3 //#define LCD_PINS_D14 PD9 // RXD3
//#define LCD_PINS_D13 PD8 // TXD3 //#define LCD_PINS_D13 PD8 // TXD3
#endif // ULTRA_LCD #endif // HAS_SPI_LCD
// //
// SPI2 on LCD conn // SPI2 on LCD conn

View file

@ -120,7 +120,7 @@
#define SD_DETECT_PIN -1 // RAMPS doesn't use this #define SD_DETECT_PIN -1 // RAMPS doesn't use this
#endif // ULTRA_LCD && NEWPANEL #endif // HAS_SPI_LCD && NEWPANEL
// //
// M3/M4/M5 - Spindle/Laser Control // M3/M4/M5 - Spindle/Laser Control

View file

@ -206,7 +206,7 @@
// //
// LCD / Controller // LCD / Controller
// //
#if ENABLED(ULTRA_LCD) #if HAS_SPI_LCD
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
@ -254,7 +254,7 @@
#define BTN_CENTER 15 // J0 #define BTN_CENTER 15 // J0
#define BTN_ENC BTN_CENTER #define BTN_ENC BTN_CENTER
#endif // ULTRA_LCD #endif // HAS_SPI_LCD
// //
// SD Card // SD Card

View file

@ -140,7 +140,7 @@
// //
// LCD / Controller // LCD / Controller
// //
#if ENABLED(ULTRA_LCD) #if HAS_SPI_LCD
#if !MB(MINIRAMBO_10A) #if !MB(MINIRAMBO_10A)
#define KILL_PIN 32 #define KILL_PIN 32
@ -188,4 +188,4 @@
#endif // NEWPANEL #endif // NEWPANEL
#endif // ULTRA_LCD #endif // HAS_SPI_LCD

View file

@ -214,7 +214,7 @@
* that the garbage/lines are erased immediately after the SD card accesses are completed. * that the garbage/lines are erased immediately after the SD card accesses are completed.
*/ */
#if ENABLED(ULTRA_LCD) #if HAS_SPI_LCD
#define BEEPER_PIN P1_31 // EXP1.1 #define BEEPER_PIN P1_31 // EXP1.1
#define BTN_ENC P1_30 // EXP1.2 #define BTN_ENC P1_30 // EXP1.2
#define BTN_EN1 P3_26 // EXP2.5 #define BTN_EN1 P3_26 // EXP2.5

View file

@ -180,7 +180,7 @@
* ----- ----- * ----- -----
* EXP1 EXP2 * EXP1 EXP2
*/ */
#if ENABLED(ULTRA_LCD) #if HAS_SPI_LCD
#define BEEPER_PIN P1_31 #define BEEPER_PIN P1_31
#define BTN_ENC P1_30 #define BTN_ENC P1_30
@ -250,7 +250,7 @@
#endif #endif
#endif // ULTRA_LCD #endif // HAS_SPI_LCD
#ifndef SDCARD_CONNECTION #ifndef SDCARD_CONNECTION
#define SDCARD_CONNECTION ONBOARD #define SDCARD_CONNECTION ONBOARD

View file

@ -165,4 +165,4 @@
#endif #endif
#endif // ULTRA_LCD && NEWPANEL #endif // HAS_SPI_LCD && NEWPANEL

View file

@ -200,7 +200,7 @@
// //
//#define USE_INTERNAL_SD //#define USE_INTERNAL_SD
#if ENABLED(ULTRA_LCD) #if HAS_SPI_LCD
#define LCD_PINS_RS 9 // E1 JP11-11 #define LCD_PINS_RS 9 // E1 JP11-11
#define LCD_PINS_ENABLE 8 // E0 JP11-10 #define LCD_PINS_ENABLE 8 // E0 JP11-10
#define LCD_PINS_D4 7 // D7 JP11-8 #define LCD_PINS_D4 7 // D7 JP11-8

View file

@ -207,7 +207,7 @@
// //
// LCD / Controller // LCD / Controller
// //
#if ENABLED(ULTRA_LCD) #if HAS_SPI_LCD
#if ENABLED(RADDS_DISPLAY) #if ENABLED(RADDS_DISPLAY)
@ -268,7 +268,7 @@
#endif // SPARK_FULL_GRAPHICS #endif // SPARK_FULL_GRAPHICS
#endif // ULTRA_LCD #endif // HAS_SPI_LCD
#ifndef SDSS #ifndef SDSS
#define SDSS 4 #define SDSS 4

View file

@ -168,7 +168,7 @@
// //
// LCD / Controller // LCD / Controller
// //
#if ENABLED(ULTRA_LCD) #if HAS_SPI_LCD
#define KILL_PIN 80 #define KILL_PIN 80
@ -234,4 +234,4 @@
#endif // !NEWPANEL #endif // !NEWPANEL
#endif // ULTRA_LCD #endif // HAS_SPI_LCD

View file

@ -360,7 +360,7 @@
// LCDs and Controllers // // LCDs and Controllers //
////////////////////////// //////////////////////////
#if ENABLED(ULTRA_LCD) #if HAS_SPI_LCD
// //
// LCD Display output pins // LCD Display output pins
@ -638,4 +638,4 @@
#endif #endif
#endif // NEWPANEL #endif // NEWPANEL
#endif // ULTRA_LCD #endif // HAS_SPI_LCD

View file

@ -74,7 +74,7 @@
// //
// LCD / Controller // LCD / Controller
// //
#if ENABLED(ULTRA_LCD) #if HAS_SPI_LCD
#if BOTH(NEWPANEL, PANEL_ONE) #if BOTH(NEWPANEL, PANEL_ONE)
#undef LCD_PINS_D4 #undef LCD_PINS_D4
@ -127,4 +127,4 @@
#endif // NEWPANEL #endif // NEWPANEL
#endif // ULTRA_LCD #endif // HAS_SPI_LCD

View file

@ -138,7 +138,7 @@
// //
// LCD / Controller // LCD / Controller
// //
#if ENABLED(ULTRA_LCD) #if HAS_SPI_LCD
// ramps-fd lcd adaptor // ramps-fd lcd adaptor
#define BEEPER_PIN 37 #define BEEPER_PIN 37
@ -202,7 +202,7 @@
#define DOGLCD_MISO 74 // MISO_PIN #define DOGLCD_MISO 74 // MISO_PIN
#endif #endif
#endif // ULTRA_LCD #endif // HAS_SPI_LCD
#if HAS_DRIVER(TMC2208) || HAS_DRIVER(TMC2209) #if HAS_DRIVER(TMC2208) || HAS_DRIVER(TMC2209)
/** /**

View file

@ -322,7 +322,7 @@
// LCDs and Controllers // // LCDs and Controllers //
////////////////////////// //////////////////////////
#if ENABLED(ULTRA_LCD) #if HAS_SPI_LCD
// //
// LCD Display output pins // LCD Display output pins
@ -565,4 +565,4 @@
#endif #endif
#endif // NEWPANEL #endif // NEWPANEL
#endif // ULTRA_LCD #endif // HAS_SPI_LCD

View file

@ -296,7 +296,7 @@
#define LCD_PINS_ENABLE P0_18 // J3-10 & AUX-3 (SID, MOSI) #define LCD_PINS_ENABLE P0_18 // J3-10 & AUX-3 (SID, MOSI)
#define LCD_PINS_D4 P2_06 // J3-8 & AUX-3 (SCK, CLK) #define LCD_PINS_D4 P2_06 // J3-8 & AUX-3 (SCK, CLK)
#elif ENABLED(ULTRA_LCD) #elif HAS_SPI_LCD
//#define SCK_PIN P0_15 // (52) system defined J3-9 & AUX-3 //#define SCK_PIN P0_15 // (52) system defined J3-9 & AUX-3
//#define MISO_PIN P0_17 // (50) system defined J3-10 & AUX-3 //#define MISO_PIN P0_17 // (50) system defined J3-10 & AUX-3
@ -392,7 +392,7 @@
//#define LCD_SCREEN_ROT_270 //#define LCD_SCREEN_ROT_270
#endif #endif
#endif // ULTRA_LCD #endif // HAS_SPI_LCD
// //
// Ethernet pins // Ethernet pins

View file

@ -200,7 +200,7 @@
// //
// LCD / Controller // LCD / Controller
// //
#if ENABLED(ULTRA_LCD) #if HAS_SPI_LCD
#if ANY(RADDS_DISPLAY, REPRAP_DISCOUNT_SMART_CONTROLLER, REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) #if ANY(RADDS_DISPLAY, REPRAP_DISCOUNT_SMART_CONTROLLER, REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define BEEPER_PIN 62 #define BEEPER_PIN 62
@ -271,4 +271,4 @@
#define BTN_ENC 40 #define BTN_ENC 40
#endif #endif
#endif // ULTRA_LCD #endif // HAS_SPI_LCD

View file

@ -186,7 +186,7 @@
// //
// LCD / Controller // LCD / Controller
// //
#if ENABLED(ULTRA_LCD) #if HAS_SPI_LCD
#if ANY(RADDS_DISPLAY, REPRAP_DISCOUNT_SMART_CONTROLLER, REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) #if ANY(RADDS_DISPLAY, REPRAP_DISCOUNT_SMART_CONTROLLER, REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define BEEPER_PIN 62 #define BEEPER_PIN 62
@ -255,4 +255,4 @@
#define BTN_ENC 40 #define BTN_ENC 40
#endif #endif
#endif // ULTRA_LCD #endif // HAS_SPI_LCD

View file

@ -153,9 +153,9 @@
// //
// LCD / Controller // LCD / Controller
// //
#if ENABLED(ULTRA_LCD) #if HAS_SPI_LCD
#if ENABLED(DOGLCD) #if HAS_GRAPHICAL_LCD
#if ENABLED(U8GLIB_ST7920) // SPI GLCD 12864 ST7920 ( like [www.digole.com] ) For Melzi V2.0 #if ENABLED(U8GLIB_ST7920) // SPI GLCD 12864 ST7920 ( like [www.digole.com] ) For Melzi V2.0
@ -205,7 +205,7 @@
//#define LCD_SCREEN_ROT_180 //#define LCD_SCREEN_ROT_180
//#define LCD_SCREEN_ROT_270 //#define LCD_SCREEN_ROT_270
#else // !DOGLCD #else // !HAS_GRAPHICAL_LCD
#define LCD_PINS_RS 4 #define LCD_PINS_RS 4
#define LCD_PINS_ENABLE 17 #define LCD_PINS_ENABLE 17
@ -214,7 +214,7 @@
#define LCD_PINS_D6 28 #define LCD_PINS_D6 28
#define LCD_PINS_D7 27 #define LCD_PINS_D7 27
#endif // !DOGLCD #endif // !HAS_GRAPHICAL_LCD
#if ENABLED(LCD_I2C_PANELOLU2) #if ENABLED(LCD_I2C_PANELOLU2)
@ -271,7 +271,7 @@
#define SD_DETECT_PIN -1 #define SD_DETECT_PIN -1
#endif // ULTRA_LCD #endif // HAS_SPI_LCD
// //
// M3/M4/M5 - Spindle/Laser Control // M3/M4/M5 - Spindle/Laser Control

View file

@ -68,7 +68,7 @@
#define HEATER_BED_PIN 8 #define HEATER_BED_PIN 8
#define TEMP_BED_PIN 6 #define TEMP_BED_PIN 6
#if ENABLED(DOGLCD) #if HAS_GRAPHICAL_LCD
#if ENABLED(U8GLIB_ST7920) // SPI GLCD 12864 ST7920 #if ENABLED(U8GLIB_ST7920) // SPI GLCD 12864 ST7920
#define LCD_PINS_RS 30 #define LCD_PINS_RS 30
#define LCD_PINS_ENABLE 20 #define LCD_PINS_ENABLE 20

View file

@ -99,7 +99,7 @@
// //
// LCD Pins // LCD Pins
// //
#if ENABLED(ULTRA_LCD) #if HAS_SPI_LCD
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
#define LCD_PINS_RS 49 // CS chip select /SS chip slave select #define LCD_PINS_RS 49 // CS chip select /SS chip slave select
@ -260,4 +260,4 @@
#endif #endif
#endif // NEWPANEL #endif // NEWPANEL
#endif // ULTRA_LCD #endif // HAS_SPI_LCD

View file

@ -114,7 +114,7 @@
// //
// LCD Pins // LCD Pins
// //
#if ENABLED(ULTRA_LCD) #if HAS_SPI_LCD
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
#define LCD_PINS_RS 49 // CS chip select /SS chip slave select #define LCD_PINS_RS 49 // CS chip select /SS chip slave select
@ -276,4 +276,4 @@
#endif #endif
#endif // NEWPANEL #endif // NEWPANEL
#endif // ULTRA_LCD #endif // HAS_SPI_LCD

View file

@ -139,7 +139,7 @@ D8 HEATER_BED_PIN CS1 RX4 A12 31 | 46 * * 47 | 34 A15 PWM
#endif #endif
#endif #endif
#if ENABLED(ULTRA_LCD) #if HAS_SPI_LCD
#define LCD_PINS_RS 40 #define LCD_PINS_RS 40
#define LCD_PINS_ENABLE 41 #define LCD_PINS_ENABLE 41
#define LCD_PINS_D4 42 #define LCD_PINS_D4 42

View file

@ -153,7 +153,7 @@
#define SD_DETECT_PIN -1 #define SD_DETECT_PIN -1
#endif // ULTRA_LCD && NEWPANEL #endif // HAS_SPI_LCD && NEWPANEL
// //
// M3/M4/M5 - Spindle/Laser Control // M3/M4/M5 - Spindle/Laser Control

View file

@ -81,7 +81,7 @@
// AnyCubic made the following changes to 1.1.0-RC8 // AnyCubic made the following changes to 1.1.0-RC8
// If these are appropriate for your LCD let us know. // If these are appropriate for your LCD let us know.
// //
#if 0 && ENABLED(ULTRA_LCD) #if 0 && HAS_SPI_LCD
// LCD Display output pins // LCD Display output pins
#if BOTH(NEWPANEL, PANEL_ONE) #if BOTH(NEWPANEL, PANEL_ONE)
@ -107,4 +107,4 @@
#define DOGLCD_A0 42 #define DOGLCD_A0 42
#endif #endif
#endif // ULTRA_LCD #endif // HAS_SPI_LCD

View file

@ -115,7 +115,7 @@
// //
// LCD / Controller // LCD / Controller
// //
#if ENABLED(ULTRA_LCD) #if HAS_SPI_LCD
#define BEEPER_PIN 18 #define BEEPER_PIN 18
@ -154,7 +154,7 @@
#endif // !NEWPANEL #endif // !NEWPANEL
#endif // ULTRA_LCD #endif // HAS_SPI_LCD
// //
// M3/M4/M5 - Spindle/Laser Control // M3/M4/M5 - Spindle/Laser Control

View file

@ -55,10 +55,9 @@
* and repeat steps 2 - 5 * and repeat steps 2 - 5
*/ */
#define board_rev_1_1_TO_1_3 #define BOARD_REV_1_1_TO_1_3
//#define board_rev_1_0 //#define BOARD_REV_1_0
//#define board_rev_1_5 //#define BOARD_REV_1_5
#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__) #if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
#error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
@ -71,7 +70,7 @@
// //
// Limit Switches // Limit Switches
// //
#if ENABLED(board_rev_1_1_TO_1_3) #if ENABLED(BOARD_REV_1_1_TO_1_3)
#define X_MIN_PIN 15 // SW1 #define X_MIN_PIN 15 // SW1
#define X_MAX_PIN 14 // SW2 #define X_MAX_PIN 14 // SW2
#define Y_MIN_PIN 17 // SW3 #define Y_MIN_PIN 17 // SW3
@ -80,7 +79,12 @@
#define Z_MAX_PIN 18 // SW6 #define Z_MAX_PIN 18 // SW6
#endif #endif
#if ENABLED(board_rev_1_0) #if ENABLED(BOARD_REV_1_0)
#if ENABLED(SPINDLE_LASER_ENABLE)
#define X_STOP_PIN 13 // SW1 (didn't change) - also has a useable hardware PWM
#define Y_STOP_PIN 12 // SW2
#define Z_STOP_PIN 11 // SW3
#else
#define X_MIN_PIN 13 // SW1 #define X_MIN_PIN 13 // SW1
#define X_MAX_PIN 12 // SW2 #define X_MAX_PIN 12 // SW2
#define Y_MIN_PIN 11 // SW3 #define Y_MIN_PIN 11 // SW3
@ -88,8 +92,9 @@
#define Z_MIN_PIN 9 // SW5 #define Z_MIN_PIN 9 // SW5
#define Z_MAX_PIN 8 // SW6 #define Z_MAX_PIN 8 // SW6
#endif #endif
#endif
#if ENABLED(board_rev_1_5) #if ENABLED(BOARD_REV_1_5)
#define X_MIN_PIN 22 #define X_MIN_PIN 22
#define X_MAX_PIN 24 #define X_MAX_PIN 24
#define Y_MIN_PIN 26 #define Y_MIN_PIN 26
@ -101,7 +106,7 @@
// //
// Z Probe (when not Z_MIN_PIN) // Z Probe (when not Z_MIN_PIN)
// //
#ifndef Z_MIN_PROBE_PIN #if !defined(Z_MIN_PROBE_PIN) && !BOTH(SPINDLE_LASER_ENABLE, BOARD_REV_1_0)
#define Z_MIN_PROBE_PIN Z_MAX_PIN #define Z_MIN_PROBE_PIN Z_MAX_PIN
#endif #endif
@ -120,13 +125,20 @@
#define Z_DIR_PIN 39 #define Z_DIR_PIN 39
#define Z_ENABLE_PIN 35 #define Z_ENABLE_PIN 35
#if BOTH(SPINDLE_LASER_ENABLE, BOARD_REV_1_1_TO_1_3) && EXTRUDERS == 1
// Move E0 to the spare and get Spindle/Laser signals from E0
#define E0_STEP_PIN 49
#define E0_DIR_PIN 47
#define E0_ENABLE_PIN 48
#else
#define E0_STEP_PIN 43 #define E0_STEP_PIN 43
#define E0_DIR_PIN 45 #define E0_DIR_PIN 45
#define E0_ENABLE_PIN 41 #define E0_ENABLE_PIN 41
#define E1_STEP_PIN -1 // 49 #define E1_STEP_PIN 49
#define E1_DIR_PIN -1 // 47 #define E1_DIR_PIN 47
#define E1_ENABLE_PIN -1 // 48 #define E1_ENABLE_PIN 48
#endif
// //
// Temperature Sensors // Temperature Sensors
@ -144,7 +156,8 @@
// //
// LCD / Controller // LCD / Controller
// //
#if ANY(board_rev_1_0, board_rev_1_1_TO_1_3) #if ANY(BOARD_REV_1_0, BOARD_REV_1_1_TO_1_3)
#define LCD_PINS_RS 24 #define LCD_PINS_RS 24
#define LCD_PINS_ENABLE 22 #define LCD_PINS_ENABLE 22
#define LCD_PINS_D4 36 #define LCD_PINS_D4 36
@ -152,7 +165,7 @@
#define LCD_PINS_D6 32 #define LCD_PINS_D6 32
#define LCD_PINS_D7 30 #define LCD_PINS_D7 30
#elif ENABLED(board_rev_1_5, ULTRA_LCD) #elif ENABLED(BOARD_REV_1_5, ULTRA_LCD)
#define BEEPER_PIN 18 #define BEEPER_PIN 18
@ -187,16 +200,14 @@
#define LCD_PINS_D6 20 #define LCD_PINS_D6 20
#define LCD_PINS_D7 19 #define LCD_PINS_D7 19
#define SD_DETECT_PIN -1
#endif // !NEWPANEL #endif // !NEWPANEL
#endif // ULTRA_LCD #endif
// //
// case light - see spindle section for more info on available hardware PWMs // case light - see spindle section for more info on available hardware PWMs
// //
#if !PIN_EXISTS(CASE_LIGHT) && ENABLED(board_rev_1_5) #if !PIN_EXISTS(CASE_LIGHT) && ENABLED(BOARD_REV_1_5)
#define CASE_LIGHT_PIN 7 // use PWM - MUST BE HARDWARE PWM #define CASE_LIGHT_PIN 7 // use PWM - MUST BE HARDWARE PWM
#endif #endif
@ -204,33 +215,11 @@
// M3/M4/M5 - Spindle/Laser Control // M3/M4/M5 - Spindle/Laser Control
// //
#if ENABLED(SPINDLE_LASER_ENABLE) #if ENABLED(SPINDLE_LASER_ENABLE)
#if EITHER(BOARD_REV_1_0, BOARD_REV_1_5) // Use the last three SW positions
#if ENABLED(board_rev_1_0) // use the last three SW positions #define SPINDLE_DIR_PIN 10 // 1.0: SW4 1.5: EXP3-6 ("10")
#define SPINDLE_LASER_PWM_PIN 9 // 1.0: SW5 1.5: EXP3-7 ( "9") .. MUST BE HARDWARE PWM
#undef Z_MIN_PROBE_PIN #define SPINDLE_LASER_ENA_PIN 8 // 1.0: SW6 1.5: EXP3-8 ( "8") .. Pin should have a pullup!
#undef X_MIN_PIN // SW1 #elif ENABLED(BOARD_REV_1_1_TO_1_3)
#undef X_MAX_PIN // SW2
#undef Y_MIN_PIN // SW3
#undef Y_MAX_PIN // SW4
#undef Z_MIN_PIN // SW5
#undef Z_MAX_PIN // SW6
#define X_STOP_PIN 13 // SW1 (didn't change) - also has a useable hardware PWM
#define Y_STOP_PIN 12 // SW2
#define Z_STOP_PIN 11 // SW3
#define SPINDLE_DIR_PIN 10 // SW4
#define SPINDLE_LASER_PWM_PIN 9 // SW5 MUST BE HARDWARE PWM
#define SPINDLE_LASER_ENA_PIN 8 // SW6 Pin should have a pullup!
#elif ENABLED(board_rev_1_5) // use the same pins - but now they are on a different connector
#define SPINDLE_DIR_PIN 10 // EXP3-6 (silkscreen says 10)
#define SPINDLE_LASER_PWM_PIN 9 // EXP3-7 (silkscreen says 9) MUST BE HARDWARE PWM
#define SPINDLE_LASER_ENA_PIN 8 // EXP3-8 (silkscreen says 8) Pin should have a pullup!
#elif ENABLED(board_rev_1_1_TO_1_3)
/** /**
* Only four hardware PWMs physically connected to anything on these boards: * Only four hardware PWMs physically connected to anything on these boards:
* *
@ -242,13 +231,7 @@
* If one of the heaters is used then special precautions will usually be needed. * If one of the heaters is used then special precautions will usually be needed.
* They have an LED and resistor pullup to +24V which could damage 3.3V-5V ICs. * They have an LED and resistor pullup to +24V which could damage 3.3V-5V ICs.
*/ */
#if EXTRUDERS == 1 // Move E0 stepper module to the spare and get signals from E0 #if EXTRUDERS == 1
#undef E0_STEP_PIN
#undef E0_DIR_PIN
#undef E0_ENABLE_PIN
#define E0_STEP_PIN 49
#define E0_DIR_PIN 47
#define E0_ENABLE_PIN 48
#define SPINDLE_DIR_PIN 43 #define SPINDLE_DIR_PIN 43
#define SPINDLE_LASER_PWM_PIN 45 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 45 // MUST BE HARDWARE PWM
#define SPINDLE_LASER_ENA_PIN 41 // Pin should have a pullup! #define SPINDLE_LASER_ENA_PIN 41 // Pin should have a pullup!

View file

@ -43,7 +43,7 @@ opt_enable PIDTEMPBED FIX_MOUNTED_PROBE Z_SAFE_HOMING EEPROM_SETTINGS \
opt_enable SLOW_PWM_HEATERS THERMAL_PROTECTION_CHAMBER opt_enable SLOW_PWM_HEATERS THERMAL_PROTECTION_CHAMBER
opt_set TEMP_SENSOR_CHAMBER 3 opt_set TEMP_SENSOR_CHAMBER 3
opt_set HEATER_CHAMBER_PIN 45 opt_set HEATER_CHAMBER_PIN 45
exec_test $1 $2 "RAMPS with 2 extruders, RRDFGSC, Linear ABL, LEDs, and many options" exec_test $1 $2 "RAMPS with 2 extruders, RepRap LCD, Linear ABL, LEDs, and many options"
# #
# Test a probeless build of AUTO_BED_LEVELING_UBL, with lots of extruders # Test a probeless build of AUTO_BED_LEVELING_UBL, with lots of extruders