Merge pull request #10742 from thinkyhead/bf2_u8g_code_cleanup

[2.0.x] Prevent compilation of unused u8g-oriented code
This commit is contained in:
Scott Lahteine 2018-05-14 14:40:44 -05:00 committed by GitHub
commit 7edf5bcb7b
Signed by: GitHub
GPG key ID: 4AEE18F83AFDEB23
15 changed files with 440 additions and 416 deletions

View file

@ -64,7 +64,7 @@ script:
- opt_set TEMP_SENSOR_BED 1
- opt_set POWER_SUPPLY 1
- opt_enable PIDTEMPBED FIX_MOUNTED_PROBE Z_SAFE_HOMING
- opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT EEPROM_SETTINGS
- opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT EEPROM_SETTINGS PINS_DEBUGGING
- opt_enable BLINKM PCA9632 RGB_LED NEOPIXEL_LED AUTO_POWER_CONTROL NOZZLE_PARK_FEATURE FILAMENT_RUNOUT_SENSOR
- opt_enable AUTO_BED_LEVELING_LINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE
- opt_enable_adv ARC_P_CIRCLES ADVANCED_PAUSE_FEATURE CNC_WORKSPACE_PLANES CNC_COORDINATE_SYSTEMS POWER_LOSS_RECOVERY
@ -83,13 +83,15 @@ script:
- opt_set TEMP_SENSOR_3 20
- opt_set TEMP_SENSOR_4 999
- opt_set TEMP_SENSOR_BED 1
- opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 DEBUG_LEVELING_FEATURE G26_MESH_EDITING ENABLE_LEVELING_FADE_HEIGHT EEPROM_SETTINGS EEPROM_CHITCHAT G3D_PANEL SKEW_CORRECTION
- opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 DEBUG_LEVELING_FEATURE G26_MESH_EDITING ENABLE_LEVELING_FADE_HEIGHT SKEW_CORRECTION
- opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
- opt_enable_adv CUSTOM_USER_MENUS I2C_POSITION_ENCODERS BABYSTEPPING BABYSTEP_XY LIN_ADVANCE NANODLP_Z_SYNC QUICK_HOME JUNCTION_DEVIATION
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
#
# Add a Sled Z Probe, use UBL Cartesian moves, use Japanese language
#
- opt_enable Z_PROBE_SLED SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE
- opt_set LCD_LANGUAGE jp-kana
- opt_disable SEGMENT_LEVELED_MOVES
- opt_enable_adv BABYSTEP_ZPROBE_OFFSET DOUBLECLICK_FOR_Z_BABYSTEPPING
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
@ -131,13 +133,13 @@ script:
- opt_set_adv I2C_SLAVE_ADDRESS 63
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
#
# Mixing Extruder with 5 steppers
# Mixing Extruder with 5 steppers, Cyrillic
#
- restore_configs
- opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO
- opt_enable MIXING_EXTRUDER CR10_STOCKDISPLAY
- opt_set MIXING_STEPPERS 5
- opt_set LCD_LANGUAGE jp-kana
- opt_set LCD_LANGUAGE ru
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
#
# Test DUAL_X_CARRIAGE
@ -152,11 +154,11 @@ script:
#
# Test SPEAKER with BOARD_BQ_ZUM_MEGA_3D and BQ_LCD_SMART_CONTROLLER
#
- restore_configs
- opt_set MOTHERBOARD BOARD_BQ_ZUM_MEGA_3D
- opt_set LCD_FEEDBACK_FREQUENCY_DURATION_MS 10
- opt_set LCD_FEEDBACK_FREQUENCY_HZ 100
- opt_enable BQ_LCD_SMART_CONTROLLER SPEAKER
#- restore_configs
#- opt_set MOTHERBOARD BOARD_BQ_ZUM_MEGA_3D
#- opt_set LCD_FEEDBACK_FREQUENCY_DURATION_MS 10
#- opt_set LCD_FEEDBACK_FREQUENCY_HZ 100
#- opt_enable BQ_LCD_SMART_CONTROLLER SPEAKER
#
# Test SWITCHING_EXTRUDER
#
@ -171,9 +173,9 @@ script:
#
# Enable COREXY
#
- restore_configs
- opt_enable COREXY
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
#- restore_configs
#- opt_enable COREXY
#- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
#
# Test many less common options
#
@ -187,7 +189,7 @@ script:
- opt_enable_adv VOLUMETRIC_DEFAULT_ON NO_WORKSPACE_OFFSETS ACTION_ON_KILL
- opt_enable_adv EXTRA_FAN_SPEED FWERETRACT Z_DUAL_STEPPER_DRIVERS Z_DUAL_ENDSTOPS
- opt_enable_adv MENU_ADDAUTOSTART SDCARD_SORT_ALPHA
- opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER
- opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER BABYSTEPPING DAC_MOTOR_CURRENT_DEFAULT
- opt_enable FILAMENT_LCD_DISPLAY FILAMENT_WIDTH_SENSOR
- opt_enable ENDSTOP_INTERRUPTS_FEATURE FAN_SOFT_PWM SDSUPPORT
- opt_enable USE_XMAX_PLUG
@ -197,15 +199,15 @@ script:
#
# ULTRA_LCD
#
- restore_configs
- opt_enable ULTRA_LCD
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
#- restore_configs
#- opt_enable ULTRA_LCD
#- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
#
# DOGLCD
#
- restore_configs
- opt_enable DOGLCD
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
#- restore_configs
#- opt_enable DOGLCD
#- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
#
# MAKRPANEL
# Needs to use Melzi and Sanguino hardware
@ -216,27 +218,31 @@ script:
#
# REPRAP_DISCOUNT_SMART_CONTROLLER, SDSUPPORT, BABYSTEPPING, RIGIDBOARD_V2, and DAC_MOTOR_CURRENT_DEFAULT
#
- restore_configs
- opt_set MOTHERBOARD BOARD_RIGIDBOARD_V2
- opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT BABYSTEPPING DAC_MOTOR_CURRENT_DEFAULT
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
#
#- restore_configs
#- opt_set MOTHERBOARD BOARD_RIGIDBOARD_V2
#- opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT BABYSTEPPING DAC_MOTOR_CURRENT_DEFAULT
#- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
# #
# G3D_PANEL with SDCARD_SORT_ALPHA and STATUS_MESSAGE_SCROLLING
#
- restore_configs
- opt_enable G3D_PANEL SDSUPPORT
- opt_enable_adv SDCARD_SORT_ALPHA STATUS_MESSAGE_SCROLLING SCROLL_LONG_FILENAMES
- opt_set_adv SDSORT_GCODE true
- opt_set_adv SDSORT_USES_RAM true
- opt_set_adv SDSORT_USES_STACK true
- opt_set_adv SDSORT_CACHE_NAMES true
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
#- restore_configs
#- opt_enable G3D_PANEL SDSUPPORT
#- opt_enable_adv SDCARD_SORT_ALPHA STATUS_MESSAGE_SCROLLING SCROLL_LONG_FILENAMES
#- opt_set_adv SDSORT_GCODE true
#- opt_set_adv SDSORT_USES_RAM true
#- opt_set_adv SDSORT_USES_STACK true
#- opt_set_adv SDSORT_CACHE_NAMES true
#- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
#
# REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER with SDCARD_SORT_ALPHA and STATUS_MESSAGE_SCROLLING
# REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER with LIGHTWEIGHT_UI
#
- restore_configs
- opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT
- opt_enable_adv SDCARD_SORT_ALPHA STATUS_MESSAGE_SCROLLING SCROLL_LONG_FILENAMES LIGHTWEIGHT_UI
- opt_set_adv SDSORT_GCODE true
- opt_set_adv SDSORT_USES_RAM true
- opt_set_adv SDSORT_USES_STACK true
- opt_set_adv SDSORT_CACHE_NAMES true
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
#
# REPRAPWORLD_KEYPAD
@ -248,9 +254,9 @@ script:
#
# RA_CONTROL_PANEL
#
- restore_configs
- opt_enable RA_CONTROL_PANEL PINS_DEBUGGING
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
#- restore_configs
#- opt_enable RA_CONTROL_PANEL PINS_DEBUGGING
#- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
#
######## I2C LCD/PANELS ##############
#
@ -278,19 +284,19 @@ script:
#
# LCM1602
#
- restore_configs
- opt_enable LCM1602
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
#- restore_configs
#- opt_enable LCM1602
#- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
#
# Language files test with REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
#
- restore_configs
- opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT
- for lang in an bg ca zh_CN zh_TW cz da de el el-gr en es eu fi fr gl hr it jp-kana nl pl pt pt-br ru sk tr uk test; do opt_set LCD_LANGUAGE $lang; echo "compile with language $lang ..."; build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}; done
#- restore_configs
#- opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT
#- for lang in an bg ca zh_CN zh_TW cz da de el el-gr en es eu fi fr gl hr it jp-kana nl pl pt pt-br ru sk tr uk test; do opt_set LCD_LANGUAGE $lang; echo "compile with language $lang ..."; build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}; done
#
- restore_configs
- opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT
- for lang in an bg ca zh_CN zh_TW cz da de el el-gr en es eu fi fr gl hr it jp-kana nl pl pt pt-br ru sk tr uk test; do opt_set LCD_LANGUAGE $lang; echo "compile with language $lang ..."; build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}; done
#- restore_configs
#- opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT
#- for lang in an bg ca zh_CN zh_TW cz da de el el-gr en es eu fi fr gl hr it jp-kana nl pl pt pt-br ru sk tr uk test; do opt_set LCD_LANGUAGE $lang; echo "compile with language $lang ..."; build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}; done
#
#
######## Example Configurations ##############
@ -308,8 +314,8 @@ script:
# Delta Config (generic) + UBL + ALLEN_KEY + OLED_PANEL_TINYBOY2 + EEPROM_SETTINGS
#
- use_example_configs delta/generic
- opt_disable DISABLE_MIN_ENDSTOPS
- opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 Z_PROBE_ALLEN_KEY EEPROM_SETTINGS EEPROM_CHITCHAT OLED_PANEL_TINYBOY2 MESH_EDIT_GFX_OVERLAY
- opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 Z_PROBE_ALLEN_KEY EEPROM_SETTINGS EEPROM_CHITCHAT
- opt_enable OLED_PANEL_TINYBOY2 MESH_EDIT_GFX_OVERLAY
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
#
# Delta Config (FLSUN AC because it's complex)
@ -325,7 +331,7 @@ script:
# SCARA with TMC2130
#
- use_example_configs SCARA
- opt_enable AUTO_BED_LEVELING_BILINEAR FIX_MOUNTED_PROBE USE_ZMIN_PLUG EEPROM_SETTINGS EEPROM_CHITCHAT ULTIMAKERCONTROLLER SCARA_FEEDRATE_SCALING
- opt_enable AUTO_BED_LEVELING_BILINEAR FIX_MOUNTED_PROBE USE_ZMIN_PLUG EEPROM_SETTINGS EEPROM_CHITCHAT ULTIMAKERCONTROLLER
- opt_enable_adv HAVE_TMC2130 X_IS_TMC2130 Y_IS_TMC2130 Z_IS_TMC2130
- opt_enable_adv MONITOR_DRIVER_STATUS STEALTHCHOP HYBRID_THRESHOLD SENSORLESS_HOMING
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}

View file

@ -56,50 +56,46 @@
*/
#ifdef __SAM3X8E__
// #include <inttypes.h>
#include "../../inc/MarlinConfigPre.h"
#if ENABLED(DOGLCD)
#include <U8glib.h>
// #include "src/core/macros.h"
// #include "Configuration.h"
#include "../../Marlin.h"
#include "../../inc/MarlinConfig.h"
#include <U8glib.h>
#define SPI_FULL_SPEED 0
#define SPI_HALF_SPEED 1
#define SPI_QUARTER_SPEED 2
#define SPI_EIGHTH_SPEED 3
#define SPI_SIXTEENTH_SPEED 4
#define SPI_SPEED_5 5
#define SPI_SPEED_6 6
#define SPI_FULL_SPEED 0
#define SPI_HALF_SPEED 1
#define SPI_QUARTER_SPEED 2
#define SPI_EIGHTH_SPEED 3
#define SPI_SIXTEENTH_SPEED 4
#define SPI_SPEED_5 5
#define SPI_SPEED_6 6
void spiBegin();
void spiInit(uint8_t spiRate);
void spiSend(uint8_t b);
void spiSend(const uint8_t* buf, size_t n);
void spiBegin();
void spiInit(uint8_t spiRate);
void spiSend(uint8_t b);
void spiSend(const uint8_t* buf, size_t n);
#include <Arduino.h>
#include "fastio_Due.h"
#include <Arduino.h>
#include "../../core/macros.h"
#include "fastio_Due.h"
void u8g_SetPIOutput_DUE_hw_spi(u8g_t *u8g, uint8_t pin_index) {
void u8g_SetPIOutput_DUE_hw_spi(u8g_t *u8g, uint8_t pin_index) {
PIO_Configure(g_APinDescription[u8g->pin_list[pin_index]].pPort, PIO_OUTPUT_1,
g_APinDescription[u8g->pin_list[pin_index]].ulPin, g_APinDescription[u8g->pin_list[pin_index]].ulPinConfiguration); // OUTPUT
}
}
void u8g_SetPILevel_DUE_hw_spi(u8g_t *u8g, uint8_t pin_index, uint8_t level) {
void u8g_SetPILevel_DUE_hw_spi(u8g_t *u8g, uint8_t pin_index, uint8_t level) {
volatile Pio* port = g_APinDescription[u8g->pin_list[pin_index]].pPort;
uint32_t mask = g_APinDescription[u8g->pin_list[pin_index]].ulPin;
if (level) port->PIO_SODR = mask;
else port->PIO_CODR = mask;
}
}
uint8_t u8g_com_HAL_DUE_shared_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
{
uint8_t u8g_com_HAL_DUE_shared_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
{
switch(msg)
{
case U8G_COM_MSG_STOP:
@ -158,6 +154,8 @@
break;
}
return 1;
}
}
#endif // DOGLCD
#endif //__SAM3X8E__

View file

@ -55,9 +55,12 @@
#ifdef ARDUINO_ARCH_SAM
#include "../../inc/MarlinConfigPre.h"
#if ENABLED(DOGLCD)
#include <U8glib.h>
#include <Arduino.h>
#include "../../core/macros.h"
#include "../Delay.h"
void u8g_SetPIOutput_DUE(u8g_t *u8g, uint8_t pin_index) {
@ -177,4 +180,6 @@ uint8_t u8g_com_HAL_DUE_ST7920_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_va
return 1;
}
#endif //ARDUINO_ARCH_SAM
#endif // DOGLCD
#endif // ARDUINO_ARCH_SAM

View file

@ -55,11 +55,11 @@
#ifdef TARGET_LPC1768
#include "../../inc/MarlinConfigPre.h"
#if ENABLED(DOGLCD)
//#include <inttypes.h>
//#include "src/core/macros.h"
//#include "Configuration.h"
#include <U8glib.h>
#define SPI_FULL_SPEED 0
@ -132,4 +132,6 @@ uint8_t u8g_com_HAL_LPC1768_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val,
return 1;
}
#endif //TARGET_LPC1768
#endif // DOGLCD
#endif // TARGET_LPC1768

View file

@ -77,16 +77,20 @@
#ifdef TARGET_LPC1768
#include <U8glib.h>
#include "../../inc/MarlinConfigPre.h"
#define I2C_SLA (0x3C*2)
//#define I2C_CMD_MODE 0x080
#define I2C_CMD_MODE 0x000
#define I2C_DATA_MODE 0x040
#if ENABLED(DOGLCD)
//#define U8G_I2C_OPT_FAST 16
#include <U8glib.h>
uint8_t u8g_com_ssd_I2C_start_sequence(u8g_t *u8g) {
#define I2C_SLA (0x3C*2)
//#define I2C_CMD_MODE 0x080
#define I2C_CMD_MODE 0x000
#define I2C_DATA_MODE 0x040
//#define U8G_I2C_OPT_FAST 16
uint8_t u8g_com_ssd_I2C_start_sequence(u8g_t *u8g) {
/* are we requested to set the a0 state? */
if (u8g->pin_list[U8G_PI_SET_A0] == 0) return 1;
@ -101,9 +105,9 @@
u8g->pin_list[U8G_PI_SET_A0] = 0;
return 1;
}
}
uint8_t u8g_com_HAL_LPC1768_ssd_hw_i2c_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) {
uint8_t u8g_com_HAL_LPC1768_ssd_hw_i2c_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) {
switch(msg) {
case U8G_COM_MSG_INIT:
//u8g_com_arduino_digital_write(u8g, U8G_PI_SCL, HIGH);
@ -184,6 +188,8 @@
} // switch
return 1;
}
}
#endif // DOGLCD
#endif // TARGET_LPC1768

View file

@ -61,16 +61,20 @@
#ifdef TARGET_LPC1768
#include <U8glib.h>
#include "../../inc/MarlinConfigPre.h"
#if ENABLED(DOGLCD)
#include <U8glib.h>
//void pinMode(int16_t pin, uint8_t mode);
//void digitalWrite(int16_t pin, uint8_t pin_status);
#define I2C_SLA (0x3C*2)
//#define I2C_CMD_MODE 0x080
#define I2C_CMD_MODE 0x000
#define I2C_DATA_MODE 0x040
#define I2C_SLA (0x3C*2)
//#define I2C_CMD_MODE 0x080
#define I2C_CMD_MODE 0x000
#define I2C_DATA_MODE 0x040
//static uint8_t I2C_speed; // 3 - 400KHz, 13 - 100KHz
//#define SPEED_400KHz 3
@ -245,4 +249,6 @@ uint8_t u8g_com_HAL_LPC1768_ssd_sw_i2c_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_v
return 1;
}
#endif // DOGLCD
#endif // TARGET_LPC1768

View file

@ -55,32 +55,30 @@
#ifdef TARGET_LPC1768
//#include <inttypes.h>
//#include "src/core/macros.h"
//#include "Configuration.h"
#include "../../inc/MarlinConfigPre.h"
#include <U8glib.h>
#include "../Delay.h"
#if ENABLED(DOGLCD)
#define SPI_FULL_SPEED 0
#define SPI_HALF_SPEED 1
#define SPI_QUARTER_SPEED 2
#define SPI_EIGHTH_SPEED 3
#define SPI_SIXTEENTH_SPEED 4
#define SPI_SPEED_5 5
#define SPI_SPEED_6 6
//#include <inttypes.h>
#include <U8glib.h>
#include "../Delay.h"
#define SPI_FULL_SPEED 0
#define SPI_HALF_SPEED 1
#define SPI_QUARTER_SPEED 2
#define SPI_EIGHTH_SPEED 3
#define SPI_SIXTEENTH_SPEED 4
#define SPI_SPEED_5 5
#define SPI_SPEED_6 6
void spiBegin();
void spiInit(uint8_t spiRate);
void spiSend(uint8_t b);
void spiSend(const uint8_t* buf, size_t n);
void spiBegin();
void spiInit(uint8_t spiRate);
void spiSend(uint8_t b);
void spiSend(const uint8_t* buf, size_t n);
static uint8_t rs_last_state = 255;
static uint8_t rs_last_state = 255;
static void u8g_com_LPC1768_st7920_write_byte_hw_spi(uint8_t rs, uint8_t val)
{
static void u8g_com_LPC1768_st7920_write_byte_hw_spi(uint8_t rs, uint8_t val) {
uint8_t i;
if ( rs != rs_last_state) { // time to send a command/data byte
@ -98,13 +96,10 @@
spiSend(val & 0x0F0);
spiSend(val << 4);
}
}
uint8_t u8g_com_HAL_LPC1768_ST7920_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
{
switch(msg)
{
uint8_t u8g_com_HAL_LPC1768_ST7920_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) {
switch(msg) {
case U8G_COM_MSG_INIT:
u8g_SetPILevel(u8g, U8G_PI_CS, 0);
u8g_SetPIOutput(u8g, U8G_PI_CS);
@ -152,6 +147,8 @@
break;
}
return 1;
}
}
#endif // DOGLCD
#endif // TARGET_LPC1768

View file

@ -55,24 +55,27 @@
#ifdef TARGET_LPC1768
#include <U8glib.h>
#include "SoftwareSPI.h"
#include "../Delay.h"
#include "../../inc/MarlinConfigPre.h"
#define SPI_SPEED 3 // About 1 MHz
#if ENABLED(DOGLCD)
static pin_t SCK_pin_ST7920_HAL, MOSI_pin_ST7920_HAL_HAL;
static uint8_t SPI_speed = 0;
static uint8_t rs_last_state = 255;
#include <U8glib.h>
#include "SoftwareSPI.h"
#include "../Delay.h"
static void u8g_com_LPC1768_st7920_write_byte_sw_spi(uint8_t rs, uint8_t val)
{
#define SPI_SPEED 3 // About 1 MHz
static pin_t SCK_pin_ST7920_HAL, MOSI_pin_ST7920_HAL_HAL;
static uint8_t SPI_speed = 0;
static uint8_t rs_last_state = 255;
static void u8g_com_LPC1768_st7920_write_byte_sw_spi(uint8_t rs, uint8_t val) {
uint8_t i;
if ( rs != rs_last_state) { // time to send a command/data byte
if (rs != rs_last_state) { // time to send a command/data byte
rs_last_state = rs;
if ( rs == 0 )
if (rs == 0)
/* command */
swSpiTransfer(0x0F8, SPI_speed, SCK_pin_ST7920_HAL, -1, MOSI_pin_ST7920_HAL_HAL);
else
@ -84,10 +87,10 @@
swSpiTransfer(val & 0x0F0, SPI_speed, SCK_pin_ST7920_HAL, -1, MOSI_pin_ST7920_HAL_HAL);
swSpiTransfer(val << 4, SPI_speed, SCK_pin_ST7920_HAL, -1, MOSI_pin_ST7920_HAL_HAL);
}
}
uint8_t u8g_com_HAL_LPC1768_ST7920_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
{
uint8_t u8g_com_HAL_LPC1768_ST7920_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
{
switch(msg)
{
case U8G_COM_MSG_INIT:
@ -146,6 +149,8 @@
break;
}
return 1;
}
}
#endif //TARGET_LPC1768
#endif // DOGLCD
#endif // TARGET_LPC1768

View file

@ -55,6 +55,10 @@
#ifdef TARGET_LPC1768
#include "../../inc/MarlinConfigPre.h"
#if ENABLED(DOGLCD)
#include <U8glib.h>
#include "SoftwareSPI.h"
@ -120,4 +124,6 @@ uint8_t u8g_com_HAL_LPC1768_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val,
return 1;
}
#endif // DOGLCD
#endif // TARGET_LPC1768

View file

@ -65,7 +65,7 @@
* beginning.
*/
#include "../../inc/MarlinConfig.h"
#include "../../inc/MarlinConfigPre.h"
#if ENABLED(DOGLCD)

View file

@ -211,7 +211,6 @@ uint8_t u8g_dev_st7565_64128n_HAL_2x_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg,
return u8g_dev_pb16v1_base_fn(u8g, dev, msg, arg);
}
U8G_PB_DEV(u8g_dev_st7565_64128n_HAL_sw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7565_64128n_HAL_fn, U8G_COM_HAL_SW_SPI_FN);
uint8_t u8g_dev_st7565_64128n_HAL_2x_buf[WIDTH*2] U8G_NOCOMMON ;

View file

@ -53,7 +53,7 @@
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include "../../inc/MarlinConfig.h"
#include "../../inc/MarlinConfigPre.h"
#if ENABLED(DOGLCD)

View file

@ -57,7 +57,7 @@
*/
#include "../../inc/MarlinConfig.h"
#include "../../inc/MarlinConfigPre.h"
#if ENABLED(DOGLCD)
@ -108,10 +108,8 @@ static const uint8_t u8g_dev_uc1701_mini12864_HAL_data_start[] PROGMEM = {
U8G_ESC_END /* end of sequence */
};
uint8_t u8g_dev_uc1701_mini12864_HAL_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
{
switch(msg)
{
uint8_t u8g_dev_uc1701_mini12864_HAL_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg) {
switch(msg) {
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1701_mini12864_HAL_init_seq);
@ -140,10 +138,8 @@ uint8_t u8g_dev_uc1701_mini12864_HAL_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg,
return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg);
}
uint8_t u8g_dev_uc1701_mini12864_HAL_2x_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
{
switch(msg)
{
uint8_t u8g_dev_uc1701_mini12864_HAL_2x_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg) {
switch(msg) {
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_uc1701_mini12864_HAL_init_seq);

View file

@ -24,12 +24,13 @@
// file u8g_dev_st7920_128x64_HAL.cpp for the HAL version.
#include "../../inc/MarlinConfig.h"
#include "../../HAL/Delay.h"
#if ENABLED(U8GLIB_ST7920)
#if !(defined(U8G_HAL_LINKS) || defined(__SAM3X8E__))
#include "../../HAL/Delay.h"
#define ST7920_CLK_PIN LCD_PINS_D4
#define ST7920_DAT_PIN LCD_PINS_ENABLE
#define ST7920_CS_PIN LCD_PINS_RS

View file

@ -8,11 +8,8 @@
*/
#include "../inc/MarlinConfigPre.h"
#include "../inc/MarlinConfig.h"
#define USE_LCDPRINT_U8G ENABLED(ULTRA_LCD) && ENABLED(DOGLCD)
#if USE_LCDPRINT_U8G
#if ENABLED(DOGLCD)
#include <U8glib.h>
extern U8GLIB *pu8g;
@ -72,9 +69,9 @@ int lcd_put_u8str_max_rom(const char * utf8_str_P, pixel_len_t max_length) {
return ret;
}
#else // !USE_LCDPRINT_U8G
#else // !ULTRA_LCD
#define _lcd_write(a) TRACE("Write LCD: %c (%d)", (a), (int)(a));
#define _lcd_setcursor(col, row) TRACE("Set cursor LCD: (%d,%d)", (col), (row));
#define _lcd_write(a) TRACE("Write LCD: %c (%d)", (a), (int)(a));
#define _lcd_setcursor(col, row) TRACE("Set cursor LCD: (%d,%d)", (col), (row));
#endif // !USE_LCDPRINT_U8G
#endif // !ULTRA_LCD