SunRed/Marlin-Artillery-M600
Archived
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity

Add HOST_PROMPT_SUPPORT (#13039)

Browse source
This commit is contained in:
InsanityAutomation 2019-02-12 16:55:47 -05:00 committed by Scott Lahteine
parent 0feeef2604
commit 7f1b69b0c8
189 changed files with 2076 additions and 3479 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

14
Marlin/Configuration.h
View file

@ -1033,20 +1033,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/Configuration_adv.h
View file

@ -1007,13 +1007,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2014,32 +2008,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

2
Marlin/src/HAL/HAL_LPC1768/MarlinSerial.h
View file

@ -54,9 +54,7 @@ public:
emergency_parser.update(emergency_state, c);
return true; // do not discard character
}
#endif
#if ENABLED(EMERGENCY_PARSER)
EmergencyParser::State emergency_state;
#endif
};

119
Marlin/src/Marlin.cpp
View file

@ -56,6 +56,10 @@
#include "gcode/parser.h"
#include "gcode/queue.h"
#if ENABLED(HOST_ACTION_COMMANDS)
#include "feature/host_actions.h"
#endif
#if HAS_BUZZER && DISABLED(LCD_USE_I2C_BUZZER)
#include "libs/buzzer.h"
#endif
@ -315,37 +319,98 @@ void disable_all_steppers() {
disable_e_steppers();
}
#if HAS_ACTION_COMMANDS
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
void host_action(const char * const pstr, const bool eol=true) {
SERIAL_ECHOPGM("//action:");
serialprintPGM(pstr);
if (eol) SERIAL_EOL();
void event_filament_runout() {
#if ENABLED(ADVANCED_PAUSE_FEATURE)
if (did_pause_print) return; // Action already in progress. Purge triggered repeated runout.
#endif
#if ENABLED(EXTENSIBLE_UI)
ExtUI::onFilamentRunout(ExtUI::getActiveTool());
#endif
const char tool = '0'
#if NUM_RUNOUT_SENSORS > 1
+ active_extruder
#endif
;
//action:out_of_filament
#if ENABLED(HOST_PROMPT_SUPPORT)
host_prompt_reason = PROMPT_FILAMENT_RUNOUT;
host_action_prompt_end();
host_action_prompt_begin(PSTR("FilamentRunout T"), false);
SERIAL_CHAR(tool);
SERIAL_EOL();
host_action_prompt_show();
#endif
#if ENABLED(HOST_ACTION_COMMANDS)
if (!runout.host_handling
&& ( strstr(FILAMENT_RUNOUT_SCRIPT, "M600")
|| strstr(FILAMENT_RUNOUT_SCRIPT, "M125")
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|| strstr(FILAMENT_RUNOUT_SCRIPT, "M25")
#endif
)
) {
host_action_paused(false);
}
else {
// Legacy Repetier command for use until newer version supports standard dialog
// To be removed later when pause command also triggers dialog
#ifdef ACTION_ON_FILAMENT_RUNOUT
host_action(PSTR(ACTION_ON_FILAMENT_RUNOUT " T"), false);
SERIAL_CHAR(tool);
SERIAL_EOL();
#endif
host_action_pause(false);
}
SERIAL_ECHOPGM(" " ACTION_REASON_ON_FILAMENT_RUNOUT " ");
SERIAL_CHAR(tool);
SERIAL_EOL();
#endif // HOST_ACTION_COMMANDS
if (!runout.host_handling)
enqueue_and_echo_commands_P(PSTR(FILAMENT_RUNOUT_SCRIPT));
}
#ifdef ACTION_ON_KILL
void host_action_kill() { host_action(PSTR(ACTION_ON_KILL)); }
#endif
#ifdef ACTION_ON_PAUSE
void host_action_pause() { host_action(PSTR(ACTION_ON_PAUSE)); }
#endif
#ifdef ACTION_ON_PAUSED
void host_action_paused() { host_action(PSTR(ACTION_ON_PAUSED)); }
#endif
#ifdef ACTION_ON_RESUME
void host_action_resume() { host_action(PSTR(ACTION_ON_RESUME)); }
#endif
#ifdef ACTION_ON_RESUMED
void host_action_resumed() { host_action(PSTR(ACTION_ON_RESUMED)); }
#endif
#ifdef ACTION_ON_CANCEL
void host_action_cancel() { host_action(PSTR(ACTION_ON_CANCEL)); }
#endif
#ifdef ACTION_ON_FILAMENT_RUNOUT
void host_action_filament_runout(const bool eol/*=true*/) { host_action(PSTR(ACTION_ON_FILAMENT_RUNOUT), eol); }
#endif
#endif // FILAMENT_RUNOUT_SENSOR
#endif // HAS_ACTION_COMMANDS
#if ENABLED(G29_RETRY_AND_RECOVER)
void event_probe_failure() {
#ifdef G29_FAILURE_COMMANDS
process_subcommands_now_P(PSTR(G29_FAILURE_COMMANDS));
#endif
#ifdef ACTION_ON_G29_FAILURE
host_action(PSTR(ACTION_ON_G29_FAILURE)); }
#endif
#if ENABLED(G29_HALT_ON_FAILURE)
#ifdef ACTION_ON_CANCEL
host_action_cancel();
#endif
kill(PSTR(MSG_ERR_PROBING_FAILED));
#endif
}
void event_probe_recover() {
#if ENABLED(HOST_PROMPT_SUPPORT)
host_prompt_do(PROMPT_INFO, PSTR("G29 Retrying"));
#endif
#ifdef G29_RECOVER_COMMANDS
process_subcommands_now_P(PSTR(G29_RECOVER_COMMANDS));
#endif
#ifdef ACTION_ON_G29_RECOVER
host_action(PSTR(ACTION_ON_G29_RECOVER));
#endif
}
#endif
/**
* Manage several activities:

29
Marlin/src/Marlin.h
View file

@ -370,26 +370,11 @@ void protected_pin_err();
inline void suicide() { OUT_WRITE(SUICIDE_PIN, LOW); }
#endif
#if HAS_ACTION_COMMANDS
#ifdef ACTION_ON_KILL
void host_action_kill();
#endif
#ifdef ACTION_ON_PAUSE
void host_action_pause();
#endif
#ifdef ACTION_ON_PAUSED
void host_action_paused();
#endif
#ifdef ACTION_ON_RESUME
void host_action_resume();
#endif
#ifdef ACTION_ON_RESUMED
void host_action_resumed();
#endif
#ifdef ACTION_ON_CANCEL
void host_action_cancel();
#endif
#ifdef ACTION_ON_FILAMENT_RUNOUT
void host_action_filament_runout(const bool eol=true);
#endif
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
void event_filament_runout();
#endif
#if ENABLED(G29_RETRY_AND_RECOVER)
void event_probe_recover();
void event_probe_failure();
#endif

14
Marlin/src/config/default/Configuration.h
View file

@ -1033,20 +1033,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/default/Configuration_adv.h
View file

@ -1007,13 +1007,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2014,32 +2008,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/3DFabXYZ/Migbot/Configuration.h
View file

@ -1039,20 +1039,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
View file

@ -1007,13 +1007,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2016,32 +2010,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h
View file

@ -1053,20 +1053,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
View file

@ -1006,13 +1006,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2013,32 +2007,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/AliExpress/CL-260/Configuration.h
View file

@ -1033,20 +1033,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

14
Marlin/src/config/examples/Anet/A2/Configuration.h
View file

@ -1033,20 +1033,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/Anet/A2/Configuration_adv.h
View file

@ -1006,13 +1006,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2013,32 +2007,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/Anet/A2plus/Configuration.h
View file

@ -1033,20 +1033,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h
View file

@ -1006,13 +1006,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2013,32 +2007,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/Anet/A6/Configuration.h
View file

@ -1147,20 +1147,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/Anet/A6/Configuration_adv.h
View file

@ -1005,13 +1005,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2012,32 +2006,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/Anet/A8/Configuration.h
View file

@ -1046,20 +1046,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/Anet/A8/Configuration_adv.h
View file

@ -1006,13 +1006,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2013,32 +2007,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/AnyCubic/i3/Configuration.h
View file

@ -1043,20 +1043,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/AnyCubic/i3/Configuration_adv.h
View file

@ -1007,13 +1007,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2013,32 +2007,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/ArmEd/Configuration.h
View file

@ -1034,20 +1034,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/ArmEd/Configuration_adv.h
View file

@ -1011,13 +1011,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2018,32 +2012,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/Azteeg/X5GT/Configuration.h
View file

@ -1033,20 +1033,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

14
Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h
View file

@ -1033,20 +1033,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
View file

@ -1005,13 +1005,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2012,32 +2006,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h
View file

@ -1033,20 +1033,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h
View file

@ -1006,13 +1006,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2013,32 +2007,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/BQ/Hephestos/Configuration.h
View file

@ -1021,20 +1021,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
View file

@ -1006,13 +1006,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2013,32 +2007,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h
View file

@ -1033,20 +1033,10 @@
#define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
View file

@ -1014,13 +1014,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2021,32 +2015,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/BQ/WITBOX/Configuration.h
View file

@ -1021,20 +1021,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
View file

@ -1006,13 +1006,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2013,32 +2007,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/Cartesio/Configuration.h
View file

@ -1032,20 +1032,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/Cartesio/Configuration_adv.h
View file

@ -1006,13 +1006,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2013,32 +2007,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/Creality/CR-10/Configuration.h
View file

@ -1043,20 +1043,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
View file

@ -1006,13 +1006,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2016,32 +2010,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/Creality/CR-10S/Configuration.h
View file

@ -1034,20 +1034,10 @@
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
#define FIL_RUNOUT_PIN 2 // Creality CR10-S stock sensor
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h
View file

@ -1006,13 +1006,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2013,32 +2007,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/Creality/CR-10mini/Configuration.h
View file

@ -1052,20 +1052,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h
View file

@ -1006,13 +1006,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2013,32 +2007,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/Creality/CR-8/Configuration.h
View file

@ -1043,20 +1043,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h
View file

@ -1006,13 +1006,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2013,32 +2007,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/Creality/Ender-2/Configuration.h
View file

@ -1037,20 +1037,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h
View file

@ -1006,13 +1006,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2013,32 +2007,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/Creality/Ender-3/Configuration.h
View file

@ -1037,20 +1037,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h
View file

@ -1006,13 +1006,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2013,32 +2007,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/Creality/Ender-4/Configuration.h
View file

@ -1043,20 +1043,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h
View file

@ -1006,13 +1006,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2013,32 +2007,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/Einstart-S/Configuration.h
View file

@ -1043,20 +1043,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/Einstart-S/Configuration_adv.h
View file

@ -1006,13 +1006,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2013,32 +2007,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/Felix/Configuration.h
View file

@ -1015,20 +1015,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/Felix/Configuration_adv.h
View file

@ -1006,13 +1006,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2013,32 +2007,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/Felix/DUAL/Configuration.h
View file

@ -1015,20 +1015,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

14
Marlin/src/config/examples/FlashForge/CreatorPro/Configuration.h
View file

@ -1026,20 +1026,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/FlashForge/CreatorPro/Configuration_adv.h
View file

@ -1005,13 +1005,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2012,32 +2006,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h
View file

@ -1039,20 +1039,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
View file

@ -1006,13 +1006,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2013,32 +2007,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/Formbot/Raptor/Configuration.h
View file

@ -1131,20 +1131,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h
View file

@ -1008,13 +1008,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2017,32 +2011,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
#define ACTION_ON_PAUSE "pause"
#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration.h
View file

@ -1063,20 +1063,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
View file

@ -1011,13 +1011,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2018,32 +2012,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
#define ACTION_ON_PAUSE "pause"
#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/Formbot/T_Rex_3/Configuration.h
View file

@ -1058,20 +1058,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h
View file

@ -1011,13 +1011,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2013,32 +2007,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
#define ACTION_ON_PAUSE "pause"
#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/Geeetech/A10M/Configuration.h
View file

@ -1018,20 +1018,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/Geeetech/A10M/Configuration_adv.h
View file

@ -1007,13 +1007,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2014,32 +2008,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/Geeetech/A20M/Configuration.h
View file

@ -1018,20 +1018,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/Geeetech/A20M/Configuration_adv.h
View file

@ -1007,13 +1007,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2014,32 +2008,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/Geeetech/GT2560/Configuration.h
View file

@ -1048,20 +1048,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

14
Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
View file

@ -1033,20 +1033,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

14
Marlin/src/config/examples/Geeetech/MeCreator2/Configuration.h
View file

@ -1040,20 +1040,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/Geeetech/MeCreator2/Configuration_adv.h
View file

@ -1007,13 +1007,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -1999,32 +1993,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
View file

@ -1049,20 +1049,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

14
Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
View file

@ -1048,20 +1048,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

14
Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h
View file

@ -1033,20 +1033,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
View file

@ -1006,13 +1006,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2013,32 +2007,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h
View file

@ -1033,20 +1033,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
View file

@ -1006,13 +1006,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2013,32 +2007,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/Infitary/i3-M508/Configuration.h
View file

@ -1037,20 +1037,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
View file

@ -1006,13 +1006,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2013,32 +2007,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/JGAurora/A5/Configuration.h
View file

@ -1045,20 +1045,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h
View file

@ -1006,13 +1006,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2013,32 +2007,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/MakerParts/Configuration.h
View file

@ -1053,20 +1053,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/MakerParts/Configuration_adv.h
View file

@ -1006,13 +1006,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2013,32 +2007,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/Malyan/M150/Configuration.h
View file

@ -1057,20 +1057,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
View file

@ -1006,13 +1006,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2013,32 +2007,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/Malyan/M200/Configuration.h
View file

@ -1032,20 +1032,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
View file

@ -1006,13 +1006,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2013,32 +2007,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/Micromake/C1/basic/Configuration.h
View file

@ -1037,20 +1037,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

14
Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h
View file

@ -1037,20 +1037,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
View file

@ -1006,13 +1006,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2013,32 +2007,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/Mks/Robin/Configuration.h
View file

@ -1034,20 +1034,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/Mks/Robin/Configuration_adv.h
View file

@ -1007,13 +1007,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2014,32 +2008,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/Mks/Sbase/Configuration.h
View file

@ -1033,20 +1033,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
View file

@ -1014,13 +1014,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2021,32 +2015,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/RapideLite/RL200/Configuration.h
View file

@ -1033,20 +1033,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/RapideLite/RL200/Configuration_adv.h
View file

@ -1007,13 +1007,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2014,32 +2008,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h
View file

@ -1082,20 +1082,10 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

14
Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h
View file

@ -1033,20 +1033,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

14
Marlin/src/config/examples/RigidBot/Configuration.h
View file

@ -1031,20 +1031,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/RigidBot/Configuration_adv.h
View file

@ -1006,13 +1006,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2013,32 +2007,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/SCARA/Configuration.h
View file

@ -1046,20 +1046,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/SCARA/Configuration_adv.h
View file

@ -1006,13 +1006,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2013,32 +2007,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/STM32F10/Configuration.h
View file

@ -1035,20 +1035,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

14
Marlin/src/config/examples/STM32F4/Configuration.h
View file

@ -1033,20 +1033,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

14
Marlin/src/config/examples/Sanguinololu/Configuration.h
View file

@ -1064,20 +1064,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
View file

@ -1006,13 +1006,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2013,32 +2007,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/TheBorg/Configuration.h
View file

@ -1033,20 +1033,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/TheBorg/Configuration_adv.h
View file

@ -1006,13 +1006,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2013,32 +2007,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/TinyBoy2/Configuration.h
View file

@ -1089,20 +1089,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
View file

@ -1006,13 +1006,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2013,32 +2007,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/Tronxy/X1/Configuration.h
View file

@ -1033,20 +1033,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

14
Marlin/src/config/examples/Tronxy/X3A/Configuration.h
View file

@ -1037,20 +1037,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h
View file

@ -1006,13 +1006,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2013,32 +2007,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/Tronxy/X5S/Configuration.h
View file

@ -1032,20 +1032,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

14
Marlin/src/config/examples/Tronxy/XY100/Configuration.h
View file

@ -1044,20 +1044,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

14
Marlin/src/config/examples/UltiMachine/Archim1/Configuration.h
View file

@ -1033,20 +1033,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/UltiMachine/Archim1/Configuration_adv.h
View file

@ -1007,13 +1007,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2014,32 +2008,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h
View file

@ -1033,20 +1033,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
View file

@ -1006,13 +1006,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2013,32 +2007,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/VORONDesign/Configuration.h
View file

@ -1042,20 +1042,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/VORONDesign/Configuration_adv.h
View file

@ -1007,13 +1007,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2014,32 +2008,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/Velleman/K8200/Configuration.h
View file

@ -1063,20 +1063,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
View file

@ -1019,13 +1019,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2026,32 +2020,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/Velleman/K8400/Configuration.h
View file

@ -1033,20 +1033,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
View file

@ -1006,13 +1006,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2013,32 +2007,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h
View file

@ -1033,20 +1033,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

14
Marlin/src/config/examples/WASP/PowerWASP/Configuration.h
View file

@ -1052,20 +1052,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/WASP/PowerWASP/Configuration_adv.h
View file

@ -1007,13 +1007,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2014,32 +2008,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h
View file

@ -1043,20 +1043,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
View file

@ -1008,13 +1008,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2015,32 +2009,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/adafruit/ST7565/Configuration.h
View file

@ -1033,20 +1033,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

14
Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration.h
View file

@ -1221,20 +1221,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
View file

@ -1008,13 +1008,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2015,32 +2009,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
View file

@ -1161,20 +1161,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
View file

@ -1008,13 +1008,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2015,32 +2009,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h
View file

@ -1160,20 +1160,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h
View file

@ -1008,13 +1008,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2015,32 +2009,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h
View file

@ -1160,20 +1160,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
View file

@ -1008,13 +1008,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2015,32 +2009,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/delta/Geeetech/Rostock 301/Configuration.h
View file

@ -1151,20 +1151,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
View file

@ -1009,13 +1009,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2016,32 +2010,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h
View file

@ -1163,20 +1163,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

14
Marlin/src/config/examples/delta/MKS/SBASE/Configuration.h
View file

@ -1148,20 +1148,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/delta/MKS/SBASE/Configuration_adv.h
View file

@ -1008,13 +1008,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2015,32 +2009,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/delta/Tevo Little Monster/Configuration.h
View file

@ -1152,20 +1152,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/delta/Tevo Little Monster/Configuration_adv.h
View file

@ -1008,13 +1008,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2003,32 +1997,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/delta/generic/Configuration.h
View file

@ -1148,20 +1148,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/delta/generic/Configuration_adv.h
View file

@ -1008,13 +1008,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2015,32 +2009,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/delta/kossel_mini/Configuration.h
View file

@ -1150,20 +1150,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
View file

@ -1007,13 +1007,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2014,32 +2008,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/delta/kossel_pro/Configuration.h
View file

@ -1151,20 +1151,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

14
Marlin/src/config/examples/delta/kossel_xl/Configuration.h
View file

@ -1151,20 +1151,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
View file

@ -1008,13 +1008,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2015,32 +2009,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h
View file

@ -1047,20 +1047,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
View file

@ -1006,13 +1006,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2013,32 +2007,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/makibox/Configuration.h
View file

@ -1036,20 +1036,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/makibox/Configuration_adv.h
View file

@ -1006,13 +1006,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2013,32 +2007,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/stm32f103ret6/Configuration.h
View file

@ -1035,20 +1035,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

14
Marlin/src/config/examples/tvrrug/Round2/Configuration.h
View file

@ -1028,20 +1028,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
View file

@ -1006,13 +1006,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2013,32 +2007,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

14
Marlin/src/config/examples/wt150/Configuration.h
View file

@ -1038,20 +1038,10 @@
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
// Set one or more commands to run on filament runout.
// - Always applies to SD-card printing.
// - Applies to host-based printing if ACTION_ON_FILAMENT_RUNOUT is not set.
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
#define FILAMENT_RUNOUT_SCRIPT "M600"
// With this option, if filament runs out during host-based printing, Marlin
// will send "//action:<ACTION_ON_FILAMENT_RUNOUT>" to the host and let the
// host handle filament change. If left undefined the FILAMENT_RUNOUT_SCRIPT
// will be used on filament runout for both host-based and SD-card printing.
//
// The host must be able to respond to the //action: command set here.
//
//#define ACTION_ON_FILAMENT_RUNOUT "pause: filament_runout"
// After a runout is detected, continue printing this length of filament
// before executing the runout script. Useful for a sensor at the end of
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

49
Marlin/src/config/examples/wt150/Configuration_adv.h
View file

@ -1007,13 +1007,7 @@
#define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
#define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
#define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
/**
* Specify an action command to send to the host on a recovery attempt or failure.
* Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
* The host must be configured to handle the action command.
*/
#define G29_ACTION_ON_RECOVER "probe_rewipe"
#define G29_ACTION_ON_FAILURE "probe_failed"
#endif
// @section extras
@ -2014,32 +2008,23 @@
#endif
/**
* Specify an action command to send to the host when the printer is killed.
* Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
* The host must be configured to handle the action command.
* Host Action Commands
*
* Define host streamer action commands in compliance with the standard.
*
* See https://reprap.org/wiki/G-code#Action_commands
* Common commands ........ poweroff, pause, paused, resume, resumed, cancel
* G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
*
* Some features add reason codes to extend these commands.
*
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
//#define ACTION_ON_KILL "poweroff"
/**
* Specify an action command to send to the host on pause and resume.
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
* The host must be configured to handle the action command.
*
* PAUSE / RESUME : Used in non-parking scenarios where the host handles the
* action while Marlin continues to process G-Code. (M24/M25)
*
* PAUSED / RESUMED : Used in scenarios where Marlin handles pause and filament-
* change actions and the host needs to stop sending commands
* until the machine is ready to resume. (M125/M600)
*
* CANCEL : Instructs the host to abort the print job. Used when the
* print is canceled from the LCD menu.
*/
//#define ACTION_ON_PAUSE "pause"
//#define ACTION_ON_RESUME "resume"
//#define ACTION_ON_PAUSED "paused"
//#define ACTION_ON_RESUMED "resumed"
//#define ACTION_ON_CANCEL "cancel"
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
#endif
//===========================================================================
//====================== I2C Position Encoder Settings ======================

4
Marlin/src/feature/emergency_parser.cpp
View file

@ -34,6 +34,10 @@
bool EmergencyParser::killed_by_M112, // = false
EmergencyParser::enabled;
#if ENABLED(HOST_PROMPT_SUPPORT)
uint8_t EmergencyParser::M876_reason; // = 0
#endif
// Global instance
EmergencyParser emergency_parser;

55
Marlin/src/feature/emergency_parser.h
View file

@ -27,15 +27,20 @@
#define FORCE_INLINE __attribute__((always_inline)) inline
#if ENABLED(HOST_PROMPT_SUPPORT)
#include "host_actions.h"
#endif
// External references
extern volatile bool wait_for_user, wait_for_heatup;
void quickstop_stepper();
void host_response_handler(const uint8_t response);
class EmergencyParser {
public:
// Currently looking for: M108, M112, M410
// Currently looking for: M108, M112, M410, M876
enum State : char {
EP_RESET,
EP_N,
@ -48,11 +53,22 @@ public:
EP_M4,
EP_M41,
EP_M410,
#if ENABLED(HOST_PROMPT_SUPPORT)
EP_M8,
EP_M87,
EP_M876,
EP_M876S,
EP_M876SN,
#endif
EP_IGNORE // to '\n'
};
static bool killed_by_M112;
#if ENABLED(HOST_PROMPT_SUPPORT)
static uint8_t M876_reason;
#endif
EmergencyParser() { enable(); }
FORCE_INLINE static void enable() { enabled = true; }
@ -86,6 +102,9 @@ public:
case ' ': break;
case '1': state = EP_M1; break;
case '4': state = EP_M4; break;
#if ENABLED(HOST_PROMPT_SUPPORT)
case '8': state = EP_M8; break;
#endif
default: state = EP_IGNORE;
}
break;
@ -114,6 +133,37 @@ public:
state = (c == '0') ? EP_M410 : EP_IGNORE;
break;
#if ENABLED(HOST_PROMPT_SUPPORT)
case EP_M8:
state = (c == '7') ? EP_M87 : EP_IGNORE;
break;
case EP_M87:
state = (c == '6') ? EP_M876 : EP_IGNORE;
break;
case EP_M876:
switch(c) {
case ' ': break;
case 'S': state = EP_M876S; break;
default: state = EP_IGNORE; break;
}
break;
case EP_M876S:
switch (c) {
case ' ': break;
case '0': case '1': case '2':
case '3': case '4': case '5':
case '6': case '7': case '8':
case '9':
state = EP_M876SN;
M876_reason = (uint8_t)(c - '0');
break;
}
break;
#endif
case EP_IGNORE:
if (c == '\n') state = EP_RESET;
break;
@ -124,6 +174,9 @@ public:
case EP_M108: wait_for_user = wait_for_heatup = false; break;
case EP_M112: killed_by_M112 = true; break;
case EP_M410: quickstop_stepper(); break;
#if ENABLED(HOST_PROMPT_SUPPORT)
case EP_M876SN: host_response_handler(M876_reason); break;
#endif
default: break;
}
state = EP_RESET;

157
Marlin/src/feature/host_actions.cpp Normal file
View file

@ -0,0 +1,157 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#include "../inc/MarlinConfig.h"
#if ENABLED(HOST_ACTION_COMMANDS)
#include "host_actions.h"
//#define DEBUG_HOST_ACTIONS
#if ENABLED(ADVANCED_PAUSE_FEATURE)
#include "pause.h"
#include "../gcode/queue.h"
#endif
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
#include "runout.h"
#endif
extern volatile bool wait_for_user;
void host_action(const char * const pstr, const bool eol) {
SERIAL_ECHOPGM("//action:");
serialprintPGM(pstr);
if (eol) SERIAL_EOL();
}
#ifdef ACTION_ON_KILL
void host_action_kill() { host_action(PSTR(ACTION_ON_KILL)); }
#endif
#ifdef ACTION_ON_PAUSE
void host_action_pause(const bool eol/*=true*/) { host_action(PSTR(ACTION_ON_PAUSE), eol); }
#endif
#ifdef ACTION_ON_PAUSED
void host_action_paused(const bool eol/*=true*/) { host_action(PSTR(ACTION_ON_PAUSED), eol); }
#endif
#ifdef ACTION_ON_RESUME
void host_action_resume() { host_action(PSTR(ACTION_ON_RESUME)); }
#endif
#ifdef ACTION_ON_RESUMED
void host_action_resumed() { host_action(PSTR(ACTION_ON_RESUMED)); }
#endif
#ifdef ACTION_ON_CANCEL
void host_action_cancel() { host_action(PSTR(ACTION_ON_CANCEL)); }
#endif
#if ENABLED(HOST_PROMPT_SUPPORT)
PromptReason host_prompt_reason = PROMPT_NOT_DEFINED;
void host_action_prompt(const char * const ptype, const bool eol=true) {
host_action(PSTR("prompt_"), false);
serialprintPGM(ptype);
if (eol) SERIAL_EOL();
}
void host_action_prompt_plus(const char * const ptype, const char * const pstr, const bool eol=true) {
host_action_prompt(ptype, false);
SERIAL_CHAR(' ');
serialprintPGM(pstr);
if (eol) SERIAL_EOL();
}
void host_action_prompt_begin(const char * const pstr, const bool eol/*=true*/) { host_action_prompt_plus(PSTR("begin"), pstr, eol); }
void host_action_prompt_button(const char * const pstr) { host_action_prompt_plus(PSTR("button"), pstr); }
void host_action_prompt_end() { host_action_prompt(PSTR("end")); }
void host_action_prompt_show() { host_action_prompt(PSTR("show")); }
void host_prompt_do(const PromptReason reason, const char * const pstr, const char * const pbtn/*=NULL*/) {
host_prompt_reason = reason;
host_action_prompt_end();
host_action_prompt_begin(pstr);
if (pbtn) host_action_prompt_button(pbtn);
host_action_prompt_show();
}
inline void say_m876_response(const char * const pstr) {
SERIAL_ECHOPGM("M876 Responding PROMPT_");
serialprintPGM(pstr);
SERIAL_EOL();
}
void host_response_handler(const uint8_t response) {
#ifdef DEBUG_HOST_ACTIONS
SERIAL_ECHOLNPAIR("M86 Handle Reason: ", host_prompt_reason);
SERIAL_ECHOLNPAIR("M86 Handle Response: ", response);
#endif
const char *msg = PSTR("UNKNOWN STATE");
const PromptReason hpr = host_prompt_reason;
host_prompt_reason = PROMPT_NOT_DEFINED;
switch (hpr) {
case PROMPT_FILAMENT_RUNOUT:
msg = PSTR("FILAMENT_RUNOUT");
if (response == 0) {
advanced_pause_menu_response = ADVANCED_PAUSE_RESPONSE_EXTRUDE_MORE;
host_action_prompt_end(); // Close current prompt
host_action_prompt_begin(PSTR("Paused"));
host_action_prompt_button(PSTR("Purge More"));
if (false
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
|| runout.filament_ran_out
#endif
)
host_action_prompt_button(PSTR("DisableRunout"));
else {
host_prompt_reason = PROMPT_FILAMENT_RUNOUT;
host_action_prompt_button(PSTR("Continue"));
}
host_action_prompt_show();
}
else if (response == 1) {
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
if (runout.filament_ran_out) {
runout.enabled = false;
runout.reset();
}
#endif
advanced_pause_menu_response = ADVANCED_PAUSE_RESPONSE_RESUME_PRINT;
}
break;
case PROMPT_USER_CONTINUE:
msg = PSTR("FILAMENT_RUNOUT_CONTINUE");
wait_for_user = false;
break;
case PROMPT_PAUSE_RESUME:
msg = PSTR("LCD_PAUSE_RESUME");
enqueue_and_echo_commands_P(PSTR("M24"));
break;
case PROMPT_INFO:
msg = PSTR("GCODE_INFO");
break;
default: break;
}
say_m876_response(msg);
}
#endif // HOST_PROMPT_SUPPORT
#endif // HOST_ACTION_COMMANDS

70
Marlin/src/feature/host_actions.h Normal file
View file

@ -0,0 +1,70 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
#include "../inc/MarlinConfig.h"
void host_action(const char * const pstr, const bool eol=true);
#ifdef ACTION_ON_KILL
void host_action_kill();
#endif
#ifdef ACTION_ON_PAUSE
void host_action_pause(const bool eol=true);
#endif
#ifdef ACTION_ON_PAUSED
void host_action_paused(const bool eol=true);
#endif
#ifdef ACTION_ON_RESUME
void host_action_resume();
#endif
#ifdef ACTION_ON_RESUMED
void host_action_resumed();
#endif
#ifdef ACTION_ON_CANCEL
void host_action_cancel();
#endif
#if ENABLED(HOST_PROMPT_SUPPORT)
enum PromptReason : uint8_t {
PROMPT_NOT_DEFINED,
PROMPT_FILAMENT_RUNOUT,
PROMPT_USER_CONTINUE,
PROMPT_FILAMENT_RUNOUT_REHEAT,
PROMPT_PAUSE_RESUME,
PROMPT_INFO
};
extern PromptReason host_prompt_reason;
void host_response_handler(const uint8_t response);
void host_action_prompt_begin(const char * const pstr, const bool eol=true);
void host_action_prompt_button(const char * const pstr);
void host_action_prompt_end();
void host_action_prompt_show();
void host_prompt_do(const PromptReason type, const char * const pstr, const char * const pbtn=NULL);
inline void host_prompt_open(const PromptReason reason, const char * const pstr, const char * const pbtn=NULL) {
if (host_prompt_reason == PROMPT_NOT_DEFINED) host_prompt_do(reason, pstr, pbtn);
}
#endif

64
Marlin/src/feature/pause.cpp
View file

@ -45,6 +45,10 @@
#include "runout.h"
#endif
#if ENABLED(HOST_ACTION_COMMANDS)
#include "host_actions.h"
#endif
#include "../lcd/ultralcd.h"
#include "../libs/buzzer.h"
#include "../libs/nozzle.h"
@ -154,6 +158,20 @@ bool load_filament(const float &slow_load_length/*=0*/, const float &fast_load_l
KEEPALIVE_STATE(PAUSED_FOR_USER);
wait_for_user = true; // LCD click or M108 will clear this
#if ENABLED(HOST_PROMPT_SUPPORT)
const char tool = '0'
#if NUM_RUNOUT_SENSORS > 1
+ active_extruder
#endif
;
host_prompt_reason = PROMPT_USER_CONTINUE;
host_action_prompt_end();
host_action_prompt_begin(PSTR("Load Filament T"), false);
SERIAL_CHAR(tool);
SERIAL_EOL();
host_action_prompt_button(PSTR("Continue"));
host_action_prompt_show();
#endif
while (wait_for_user) {
#if HAS_BUZZER
filament_change_beep(max_beep_count);
@ -206,6 +224,9 @@ bool load_filament(const float &slow_load_length/*=0*/, const float &fast_load_l
#endif
wait_for_user = true;
#if ENABLED(HOST_PROMPT_SUPPORT)
host_prompt_do(PROMPT_USER_CONTINUE, PSTR("Continuous Purge Running..."), PSTR("Continue"));
#endif
for (float purge_count = purge_length; purge_count > 0 && wait_for_user; --purge_count)
do_pause_e_move(1, ADVANCED_PAUSE_PURGE_FEEDRATE);
wait_for_user = false;
@ -224,6 +245,24 @@ bool load_filament(const float &slow_load_length/*=0*/, const float &fast_load_l
}
// Show "Purge More" / "Resume" menu and wait for reply
#if ENABLED(HOST_PROMPT_SUPPORT)
host_prompt_reason = PROMPT_FILAMENT_RUNOUT;
host_action_prompt_end(); // Close current prompt
host_action_prompt_begin(PSTR("Paused"));
host_action_prompt_button(PSTR("PurgeMore"));
if (false
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
|| runout.filament_ran_out
#endif
)
host_action_prompt_button(PSTR("DisableRunout"));
else {
host_prompt_reason = PROMPT_FILAMENT_RUNOUT;
host_action_prompt_button(PSTR("Continue"));
}
host_action_prompt_show();
#endif
#if HAS_LCD_MENU
if (show_lcd) {
KEEPALIVE_STATE(PAUSED_FOR_USER);
@ -324,11 +363,16 @@ bool pause_print(const float &retract, const point_t &park_point, const float &u
if (did_pause_print) return false; // already paused
#if ENABLED(HOST_ACTION_COMMANDS)
#ifdef ACTION_ON_PAUSED
host_action_paused();
#elif defined(ACTION_ON_PAUSE)
host_action_pause();
#endif
#if ENABLED(HOST_PROMPT_SUPPORT)
host_prompt_open(PROMPT_INFO, PSTR("Pause"));
#endif
#endif
if (!DEBUGGING(DRYRUN) && unload_length && thermalManager.targetTooColdToExtrude(active_extruder)) {
SERIAL_ECHO_MSG(MSG_ERR_HOTEND_TOO_COLD);
@ -445,7 +489,9 @@ void wait_for_confirmation(const bool is_reload/*=false*/, const int8_t max_beep
// Wait for filament insert by user and press button
KEEPALIVE_STATE(PAUSED_FOR_USER);
wait_for_user = true; // LCD click or M108 will clear this
#if ENABLED(HOST_PROMPT_SUPPORT)
host_prompt_do(PROMPT_USER_CONTINUE, PSTR("Nozzle Parked"), PSTR("Continue"));
#endif
while (wait_for_user) {
#if HAS_BUZZER
filament_change_beep(max_beep_count);
@ -463,9 +509,17 @@ void wait_for_confirmation(const bool is_reload/*=false*/, const int8_t max_beep
#endif
SERIAL_ECHO_MSG(_PMSG(MSG_FILAMENT_CHANGE_HEAT));
#if ENABLED(HOST_PROMPT_SUPPORT)
host_prompt_do(PROMPT_USER_CONTINUE, PSTR("HeaterTimeout"), PSTR("Reheat"));
#endif
// Wait for LCD click or M108
while (wait_for_user) idle(true);
#if ENABLED(HOST_PROMPT_SUPPORT)
host_prompt_do(PROMPT_USER_CONTINUE, PSTR("Reheating"));
#endif
// Re-enable the heaters if they timed out
HOTEND_LOOP() thermalManager.reset_heater_idle_timer(e);
@ -480,7 +534,9 @@ void wait_for_confirmation(const bool is_reload/*=false*/, const int8_t max_beep
HOTEND_LOOP()
thermalManager.start_heater_idle_timer(e, nozzle_timeout);
#if ENABLED(HOST_PROMPT_SUPPORT)
host_prompt_do(PROMPT_USER_CONTINUE, PSTR("Reheat Done"), PSTR("Continue"));
#endif
wait_for_user = true;
nozzle_timed_out = false;
@ -578,6 +634,10 @@ void resume_print(const float &slow_load_length/*=0*/, const float &fast_load_le
--did_pause_print;
#if ENABLED(HOST_PROMPT_SUPPORT)
host_prompt_open(PROMPT_INFO, PSTR("Resume"));
#endif
#if ENABLED(SDSUPPORT)
if (did_pause_print) {
card.startFileprint();

7
Marlin/src/feature/prusa_MMU2/mmu2.cpp
View file

@ -38,6 +38,10 @@ MMU2 mmu2;
#include "../../module/stepper_indirection.h"
#include "../../Marlin.h"
#if ENABLED(HOST_PROMPT_SUPPORT)
#include "../../feature/host_actions.h"
#endif
#define MMU_TODELAY 100
#define MMU_TIMEOUT 10
#define MMU_CMD_TIMEOUT 60000ul //5min timeout for mmu commands (except P0)
@ -791,6 +795,9 @@ void MMU2::filamentRunout() {
LCD_MESSAGEPGM(MSG_MMU2_EJECT_RECOVER);
BUZZ(200, 404);
wait_for_user = true;
#if ENABLED(HOST_PROMPT_SUPPORT)
host_prompt_do(PROMPT_USER_CONTINUE, PSTR("MMU2 Eject Recover"), PSTR("Continue"));
#endif
while (wait_for_user) idle();
BUZZ(200, 404);
BUZZ(200, 404);

4
Marlin/src/feature/runout.cpp
View file

@ -35,6 +35,10 @@ FilamentMonitor runout;
bool FilamentMonitorBase::enabled = true,
FilamentMonitorBase::filament_ran_out; // = false
#if ENABLED(HOST_ACTION_COMMANDS)
bool FilamentMonitorBase::host_handling; // = false
#endif
/**
* Called by FilamentSensorSwitch::run when filament is detected.
* Called by FilamentSensorEncoder::block_completed when motion is detected.

40
Marlin/src/feature/runout.h
View file

@ -36,12 +36,21 @@
#include "../lcd/extensible_ui/ui_api.h"
#endif
#if ENABLED(ADVANCED_PAUSE_FEATURE)
#include "pause.h"
#endif
//#define FILAMENT_RUNOUT_SENSOR_DEBUG
class FilamentMonitorBase {
public:
static bool enabled;
static bool filament_ran_out;
static bool enabled, filament_ran_out;
#if ENABLED(HOST_ACTION_COMMANDS)
static bool host_handling;
#else
constexpr static bool host_handling = false;
#endif
};
template<class RESPONSE_T, class SENSOR_T>
@ -80,7 +89,7 @@ class TFilamentMonitor : public FilamentMonitorBase {
// Give the response a chance to update its counter.
static inline void run() {
if (enabled && !filament_ran_out && (IS_SD_PRINTING() || print_job_timer.isRunning())) {
if (enabled && !filament_ran_out && (IS_SD_PRINTING() || print_job_timer.isRunning() || did_pause_print)) {
#if FILAMENT_RUNOUT_DISTANCE_MM > 0
cli(); // Prevent RunoutResponseDelayed::block_completed from accumulating here
#endif
@ -92,24 +101,7 @@ class TFilamentMonitor : public FilamentMonitorBase {
#endif
if (ran_out) {
filament_ran_out = true;
#if ENABLED(EXTENSIBLE_UI)
ExtUI::onFilamentRunout(ExtUI::getActiveTool());
#endif
#ifdef ACTION_ON_FILAMENT_RUNOUT
#if NUM_RUNOUT_SENSORS > 1
host_action_filament_runout(false);
SERIAL_CHAR(' ');
SERIAL_ECHOLN(int(active_extruder));
#else
host_action_filament_runout();
#endif
if (!IS_SD_PRINTING())
reset();
else
#endif
{
enqueue_and_echo_commands_P(PSTR(FILAMENT_RUNOUT_SCRIPT));
}
event_filament_runout();
planner.synchronize();
}
}
@ -317,7 +309,11 @@ class FilamentSensorBase {
}
static inline void block_completed(const block_t* const b) {
if (b->steps[X_AXIS] || b->steps[Y_AXIS] || b->steps[Z_AXIS]) {
if (b->steps[X_AXIS] || b->steps[Y_AXIS] || b->steps[Z_AXIS]
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|| did_pause_print // Allow pause purge move to re-trigger runout state
#endif
) {
// Only trigger on extrusion with XYZ movement to allow filament change and retract/recover.
const uint8_t e = b->extruder;
const int32_t steps = b->steps[E_AXIS];

7
Marlin/src/gcode/config/M43.cpp
View file

@ -34,6 +34,10 @@
#include "../../module/servo.h"
#endif
#if ENABLED(HOST_PROMPT_SUPPORT)
#include "../../feature/host_actions.h"
#endif
inline void toggle_pins() {
const bool ignore_protection = parser.boolval('I');
const int repeat = parser.intval('R', 1),
@ -286,6 +290,9 @@ void GcodeSuite::M43() {
#if HAS_RESUME_CONTINUE
wait_for_user = true;
#if ENABLED(HOST_PROMPT_SUPPORT)
host_prompt_do(PROMPT_USER_CONTINUE, PSTR("M43 Wait Called"), PSTR("Continue"));
#endif
KEEPALIVE_STATE(PAUSED_FOR_USER);
#endif

14
Marlin/src/gcode/feature/runout/M412.cpp
View file

@ -31,9 +31,17 @@
* M412: Enable / Disable filament runout detection
*/
void GcodeSuite::M412() {
if (parser.seen('S')) {
runout.reset();
runout.enabled = parser.value_bool();
if (parser.seen("HS"
#if ENABLED(HOST_ACTION_COMMANDS)
"R"
#endif
)) {
#if ENABLED(HOST_ACTION_COMMANDS)
if (parser.seen('H')) runout.host_handling = parser.value_bool();
#endif
const bool seenR = parser.seen('R'), seenS = parser.seen('S');
if (seenR || seenS) runout.reset();
if (seenS) runout.enabled = parser.value_bool();
}
else {
SERIAL_ECHO_START();

37
Marlin/src/gcode/gcode.cpp
View file

@ -36,6 +36,10 @@ GcodeSuite gcode;
#include "../module/printcounter.h"
#endif
#if ENABLED(HOST_PROMPT_SUPPORT)
#include "../feature/host_actions.h"
#endif
#include "../Marlin.h" // for idle() and suspend_auto_report
millis_t GcodeSuite::previous_move_ms;
@ -128,27 +132,17 @@ void GcodeSuite::dwell(millis_t time) {
void GcodeSuite::G29_with_retry() {
uint8_t retries = G29_MAX_RETRIES;
while (G29()) { // G29 should return true for failed probes ONLY
if (retries--) {
#ifdef G29_ACTION_ON_RECOVER
host_action(PSTR(G29_ACTION_ON_RECOVER));
#endif
#ifdef G29_RECOVER_COMMANDS
process_subcommands_now_P(PSTR(G29_RECOVER_COMMANDS));
#endif
}
if (retries--) event_probe_recover();
else {
#ifdef G29_FAILURE_COMMANDS
process_subcommands_now_P(PSTR(G29_FAILURE_COMMANDS));
#endif
#ifdef G29_ACTION_ON_FAILURE
host_action(PSTR(G29_ACTION_ON_FAILURE));
#endif
#if ENABLED(G29_HALT_ON_FAILURE)
kill(PSTR(MSG_ERR_PROBING_FAILED));
#endif
event_probe_failure();
return;
}
}
#if ENABLED(HOST_PROMPT_SUPPORT)
if (host_prompt_reason == PROMPT_G29_RETRY) host_action_prompt_end();
#endif
#ifdef G29_SUCCESS_COMMANDS
process_subcommands_now_P(PSTR(G29_SUCCESS_COMMANDS));
#endif
@ -365,8 +359,15 @@ void GcodeSuite::process_parsed_command(
case 108: M108(); break; // M108: Cancel Waiting
case 112: M112(); break; // M112: Emergency Stop
case 410: M410(); break; // M410: Quickstop - Abort all the planned moves.
#if ENABLED(HOST_PROMPT_SUPPORT)
case 876: M876(); break; // M876: Handle Host prompt responses
#endif
#else
case 108: case 112: case 410: break;
case 108: case 112: case 410:
#if ENABLED(HOST_PROMPT_SUPPORT)
case 876:
#endif
break;
#endif
#if ENABLED(HOST_KEEPALIVE_FEATURE)

3
Marlin/src/gcode/gcode.h
View file

@ -533,6 +533,9 @@ private:
static void M108();
static void M112();
static void M410();
#if ENABLED(HOST_PROMPT_SUPPORT)
static void M876();
#endif
#endif
static void M109();

9
Marlin/src/gcode/host/M115.cpp
View file

@ -132,13 +132,20 @@ void GcodeSuite::M115() {
#endif
);
// EMERGENCY_PARSER (M108, M112, M410)
// EMERGENCY_PARSER (M108, M112, M410, M876)
cap_line(PSTR("EMERGENCY_PARSER")
#if ENABLED(EMERGENCY_PARSER)
, true
#endif
);
// PROMPT SUPPORT (M876)
cap_line(PSTR("PROMPT_SUPPORT")
#if ENABLED(HOST_PROMPT_SUPPORT)
, true
#endif
);
// AUTOREPORT_SD_STATUS (M27 extension)
cap_line(PSTR("AUTOREPORT_SD_STATUS")
#if ENABLED(AUTO_REPORT_SD_STATUS)

37
Marlin/src/gcode/host/M876.cpp Normal file
View file

@ -0,0 +1,37 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#include "../../inc/MarlinConfig.h"
#if ENABLED(HOST_PROMPT_SUPPORT) && DISABLED(EMERGENCY_PARSER)
#include "../../feature/host_actions.h"
#include "../gcode.h"
#include "../../Marlin.h"
/**
* M876: Handle Prompt Response
*/
void GcodeSuite::M876() {
if (parser.seenval('S')) host_response_handler((uint8_t)parser.value_int());
}
#endif // HOST_PROMPT_SUPPORT && !EMERGENCY_PARSER

8
Marlin/src/gcode/lcd/M0_M1.cpp
View file

@ -37,6 +37,10 @@
#include "../../feature/leds/printer_event_leds.h"
#endif
#if ENABLED(HOST_PROMPT_SUPPORT)
#include "../../feature/host_actions.h"
#endif
/**
* M0: Unconditional stop - Wait for user button press on LCD
* M1: Conditional stop - Wait for user button press on LCD
@ -82,6 +86,10 @@ void GcodeSuite::M0_M1() {
KEEPALIVE_STATE(PAUSED_FOR_USER);
wait_for_user = true;
#if ENABLED(HOST_PROMPT_SUPPORT)
host_prompt_do(PROMPT_USER_CONTINUE, PSTR("M0/1 Break Called"), PSTR("Continue"));
#endif
if (ms > 0) {
ms += millis(); // wait until this time for a click
while (PENDING(millis(), ms) && wait_for_user) idle();

18
Marlin/src/gcode/sdcard/M20-M30_M32-M34_M524_M928.cpp
View file

@ -42,6 +42,10 @@
#include "../queue.h"
#endif
#if ENABLED(HOST_ACTION_COMMANDS)
#include "../../feature/host_actions.h"
#endif
/**
* M20: List SD card to serial output
*/
@ -103,9 +107,14 @@ void GcodeSuite::M24() {
print_job_timer.start();
}
#if ENABLED(HOST_ACTION_COMMANDS)
#if ENABLED(HOST_PROMPT_SUPPORT)
host_prompt_open(PROMPT_INFO, PSTR("Resume SD"));
#endif
#ifdef ACTION_ON_RESUME
host_action_resume();
#endif
#endif
ui.reset_status();
}
@ -121,15 +130,24 @@ void GcodeSuite::M25() {
#endif
#if ENABLED(PARK_HEAD_ON_PAUSE)
M125();
#else
print_job_timer.pause();
ui.reset_status();
#if ENABLED(HOST_ACTION_COMMANDS)
#if ENABLED(HOST_PROMPT_SUPPORT)
host_prompt_open(PROMPT_PAUSE_RESUME, PSTR("Pause SD"), PSTR("Resume"));
#endif
#ifdef ACTION_ON_PAUSE
host_action_pause();
#endif
#endif
#endif
}
/**

28
Marlin/src/inc/Conditionals_LCD.h
View file

@ -536,8 +536,6 @@
#define IS_KINEMATIC (ENABLED(DELTA) || IS_SCARA)
#define IS_CARTESIAN !IS_KINEMATIC
#define HAS_ACTION_COMMANDS (defined(ACTION_ON_KILL) || defined(ACTION_ON_PAUSE) || defined(ACTION_ON_PAUSED) || defined(ACTION_ON_RESUME) || defined(ACTION_ON_RESUMED) || defined(ACTION_ON_CANCEL) || defined(G29_ACTION_ON_RECOVER) || defined(G29_ACTION_ON_FAILURE) || defined(ACTION_ON_FILAMENT_RUNOUT))
#ifndef INVERT_X_DIR
#define INVERT_X_DIR false
#endif
@ -550,3 +548,29 @@
#ifndef INVERT_E_DIR
#define INVERT_E_DIR false
#endif
#if ENABLED(HOST_ACTION_COMMANDS)
#ifndef ACTION_ON_PAUSE
#define ACTION_ON_PAUSE "pause"
#endif
#ifndef ACTION_ON_RESUME
#define ACTION_ON_RESUME "resume"
#endif
#ifndef ACTION_ON_PAUSED
#define ACTION_ON_PAUSED "paused"
#endif
#ifndef ACTION_ON_RESUMED
#define ACTION_ON_RESUMED "resumed"
#endif
#ifndef ACTION_ON_CANCEL
#define ACTION_ON_CANCEL "cancel"
#endif
#if ENABLED(G29_RETRY_AND_RECOVER)
#ifndef ACTION_ON_G29_RECOVER
#define ACTION_ON_G29_RECOVER "probe_rewipe"
#endif
#ifndef ACTION_ON_G29_FAILURE
#define ACTION_ON_G29_FAILURE "probe_failed"
#endif
#endif
#endif

37
Marlin/src/inc/Conditionals_adv.h
View file

@ -42,3 +42,40 @@
// SERIAL_XON_XOFF not supported on USB-native devices
#undef SERIAL_XON_XOFF
#endif
#if ENABLED(HOST_ACTION_COMMANDS)
#ifndef ACTION_ON_PAUSE
#define ACTION_ON_PAUSE "pause"
#endif
#ifndef ACTION_ON_PAUSED
#define ACTION_ON_PAUSED "paused"
#endif
#ifndef ACTION_ON_RESUME
#define ACTION_ON_RESUME "resume"
#endif
#ifndef ACTION_ON_RESUMED
#define ACTION_ON_RESUMED "resumed"
#endif
#ifndef ACTION_ON_CANCEL
#define ACTION_ON_CANCEL "cancel"
#endif
#ifndef ACTION_ON_KILL
#define ACTION_ON_KILL "poweroff"
#endif
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
#ifndef ACTION_ON_FILAMENT_RUNOUT
#define ACTION_ON_FILAMENT_RUNOUT "filament_runout"
#endif
#ifndef ACTION_REASON_ON_FILAMENT_RUNOUT
#define ACTION_REASON_ON_FILAMENT_RUNOUT "filament_runout"
#endif
#endif
#if ENABLED(G29_RETRY_AND_RECOVER)
#ifndef ACTION_ON_G29_RECOVER
#define ACTION_ON_G29_RECOVER "probe_rewipe"
#endif
#ifndef ACTION_ON_G29_FAILURE
#define ACTION_ON_G29_FAILURE "probe_failed"
#endif
#endif
#endif

5
Marlin/src/lcd/extensible_ui/ui_api.cpp
View file

@ -58,9 +58,12 @@
#include "../../module/tool_change.h"
#endif
#if ENABLED(EMERGENCY_PARSER)
#include "../../feature/emergency_parser.h"
#endif
#if ENABLED(SDSUPPORT)
#include "../../sd/cardreader.h"
#include "../../feature/emergency_parser.h"
#define IFSD(A,B) (A)
#else
#define IFSD(A,B) (B)

5
Marlin/src/lcd/menu/menu.cpp
View file

@ -28,6 +28,7 @@
#include "../ultralcd.h"
#include "../../module/planner.h"
#include "../../module/motion.h"
#include "../../module/printcounter.h"
#include "../../gcode/queue.h"
#include "../../sd/cardreader.h"
#include "../../libs/buzzer.h"
@ -189,7 +190,9 @@ void MenuItem_bool::action_edit(PGM_P pstr, bool *ptr, screenFunc_t callback) {
void _lcd_set_z_fade_height() { set_z_fade_height(lcd_z_fade_height); }
#endif
bool printer_busy() { return planner.movesplanned() || IS_SD_PRINTING(); }
bool printer_busy() {
return planner.movesplanned() || IS_SD_PRINTING() || print_job_timer.isRunning();
}
/**
* General function to go directly to a screen

3
Marlin/src/lcd/menu/menu_delta_calibrate.cpp
View file

@ -52,6 +52,9 @@ void _man_probe_pt(const float &rx, const float &ry) {
KEEPALIVE_STATE(PAUSED_FOR_USER);
ui.defer_status_screen(true);
wait_for_user = true;
#if ENABLED(HOST_PROMPT_SUPPORT)
host_prompt_do(PROMPT_USER_CONTINUE, PSTR("Delta Calibration in progress"), PSTR("Continue"));
#endif
while (wait_for_user) idle();
KEEPALIVE_STATE(IN_HANDLER);
ui.goto_previous_screen_no_defer();

17
Marlin/src/lcd/menu/menu_main.cpp
View file

@ -42,11 +42,19 @@
#include "../../sd/cardreader.h"
#endif
#if ENABLED(HOST_ACTION_COMMANDS)
#include "../../feature/host_actions.h"
#endif
void lcd_pause() {
#if ENABLED(POWER_LOSS_RECOVERY)
if (recovery.enabled) recovery.save(true, false);
#endif
#if ENABLED(HOST_PROMPT_SUPPORT)
host_prompt_open(PROMPT_PAUSE_RESUME, PSTR("UI Pause"), PSTR("Resume"));
#endif
#if ENABLED(PARK_HEAD_ON_PAUSE)
lcd_advanced_pause_show_message(ADVANCED_PAUSE_MESSAGE_INIT, ADVANCED_PAUSE_MODE_PAUSE_PRINT); // Show message immediately to let user know about pause in progress
enqueue_and_echo_commands_P(PSTR("M25 P\nM24"));
@ -75,6 +83,9 @@ void lcd_stop() {
#ifdef ACTION_ON_CANCEL
host_action_cancel();
#endif
#if ENABLED(HOST_PROMPT_SUPPORT)
host_prompt_open(PROMPT_INFO, PSTR("UI Abort"));
#endif
ui.set_status_P(PSTR(MSG_PRINT_ABORTED), -1);
ui.return_to_status();
}
@ -147,9 +158,9 @@ void menu_main() {
}
#endif // !HAS_ENCODER_WHEEL && SDSUPPORT
#if ENABLED(SDSUPPORT) || defined(ACTION_ON_RESUME)
#if ENABLED(SDSUPPORT)
if (card.isFileOpen() && card.isPaused())
#if ENABLED(SDSUPPORT) || ENABLED(HOST_ACTION_COMMANDS)
#if DISABLED(HOST_ACTION_COMMANDS)
if (card_open && card.isPaused())
#endif
MENU_ITEM(function, MSG_RESUME_PRINT, lcd_resume);
#endif

3
Marlin/src/module/probe.cpp
View file

@ -364,6 +364,9 @@ FORCE_INLINE void probe_specific_action(const bool deploy) {
KEEPALIVE_STATE(PAUSED_FOR_USER);
wait_for_user = true;
#if ENABLED(HOST_PROMPT_SUPPORT)
host_prompt_do(PROMPT_USER_CONTINUE, PSTR("Stow Probe"), PSTR("Continue"));
#endif
while (wait_for_user) idle();
ui.reset_status();
KEEPALIVE_STATE(IN_HANDLER);

2
buildroot/share/tests/teensy35_tests
View file

@ -25,7 +25,7 @@ opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT \
BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET BABYSTEP_ZPROBE_GFX_OVERLAY \
PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE SLOW_PWM_HEATERS PIDTEMPBED EEPROM_SETTINGS INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT M100_FREE_MEMORY_WATCHER \
ADVANCED_PAUSE_FEATURE LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES SDCARD_SORT_ALPHA PARK_HEAD_ON_PAUSE \
ACTION_ON_KILL ACTION_ON_PAUSE ACTION_ON_PAUSED ACTION_ON_RESUME ACTION_ON_RESUMED ACTION_ON_CANCEL
HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT
opt_set I2C_SLAVE_ADDRESS 63
opt_set GRID_MAX_POINTS_X 16
exec_test $1 $2 "Teensy3.5 with many features"