Concise SD_REPRINT_LAST_SELECTED_FILE description

This commit is contained in:
Scott Lahteine 2017-10-26 23:33:02 -05:00
parent 3f827758d7
commit 7fad26549b
73 changed files with 165 additions and 229 deletions

View file

@ -1618,7 +1618,7 @@
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* NOTE: A separate 5V power supply is required! The Neopixel LED needs
* more current than the Arduino 5V linear regulator can produce.
* more current than the Arduino 5V linear regulator can produce.
* *** CAUTION ***
*
* LED Type. Enable only one of the following two options.

View file

@ -570,11 +570,9 @@
//#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
/**
* This option allows you to easily reprint the same SD Card file as
* was last printed. At the end of a print, the LCD Menu will jump
* straight to the file previously selected. A single click of the encoder
* wheel will restart the print. Another file or LCD option can be
* selected by using the encoder wheel to navigate through the menu structure.
* This option makes it easier to print the same SD Card file again.
* On print completion the LCD Menu will open with the file selected.
* You can just click to start the print, or navigate elsewhere.
*/
//#define SD_REPRINT_LAST_SELECTED_FILE

View file

@ -854,7 +854,7 @@
* - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
* A comprehensive bed leveling system combining the features and benefits
* of other systems. UBL also includes integrated Mesh Generation, Mesh
* Validation and Mesh Editing systems.
* Validation and Mesh Editing systems.
*
* - MESH_BED_LEVELING
* Probe a grid manually
@ -1618,7 +1618,7 @@
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* NOTE: A separate 5V power supply is required! The Neopixel LED needs
* more current than the Arduino 5V linear regulator can produce.
* more current than the Arduino 5V linear regulator can produce.
* *** CAUTION ***
*
* LED Type. Enable only one of the following two options.

View file

@ -570,11 +570,9 @@
//#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
/**
* This option allows you to easily reprint the same SD Card file as
* was last printed. At the end of a print, the LCD Menu will jump
* straight to the file previously selected. A single click of the encoder
* wheel will restart the print. Another file or LCD option can be
* selected by using the encoder wheel to navigate through the menu structure.
* This option makes it easier to print the same SD Card file again.
* On print completion the LCD Menu will open with the file selected.
* You can just click to start the print, or navigate elsewhere.
*/
//#define SD_REPRINT_LAST_SELECTED_FILE

View file

@ -874,7 +874,7 @@
* - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
* A comprehensive bed leveling system combining the features and benefits
* of other systems. UBL also includes integrated Mesh Generation, Mesh
* Validation and Mesh Editing systems.
* Validation and Mesh Editing systems.
*
* - MESH_BED_LEVELING
* Probe a grid manually
@ -1638,7 +1638,7 @@
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* NOTE: A separate 5V power supply is required! The Neopixel LED needs
* more current than the Arduino 5V linear regulator can produce.
* more current than the Arduino 5V linear regulator can produce.
* *** CAUTION ***
*
* LED Type. Enable only one of the following two options.

View file

@ -570,11 +570,9 @@
//#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
/**
* This option allows you to easily reprint the same SD Card file as
* was last printed. At the end of a print, the LCD Menu will jump
* straight to the file previously selected. A single click of the encoder
* wheel will restart the print. Another file or LCD option can be
* selected by using the encoder wheel to navigate through the menu structure.
* This option makes it easier to print the same SD Card file again.
* On print completion the LCD Menu will open with the file selected.
* You can just click to start the print, or navigate elsewhere.
*/
//#define SD_REPRINT_LAST_SELECTED_FILE

View file

@ -854,7 +854,7 @@
* - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
* A comprehensive bed leveling system combining the features and benefits
* of other systems. UBL also includes integrated Mesh Generation, Mesh
* Validation and Mesh Editing systems.
* Validation and Mesh Editing systems.
*
* - MESH_BED_LEVELING
* Probe a grid manually
@ -1618,7 +1618,7 @@
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* NOTE: A separate 5V power supply is required! The Neopixel LED needs
* more current than the Arduino 5V linear regulator can produce.
* more current than the Arduino 5V linear regulator can produce.
* *** CAUTION ***
*
* LED Type. Enable only one of the following two options.

View file

@ -973,7 +973,7 @@
* - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
* A comprehensive bed leveling system combining the features and benefits
* of other systems. UBL also includes integrated Mesh Generation, Mesh
* Validation and Mesh Editing systems.
* Validation and Mesh Editing systems.
*
* - MESH_BED_LEVELING
* Probe a grid manually
@ -1777,7 +1777,7 @@
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* NOTE: A separate 5V power supply is required! The Neopixel LED needs
* more current than the Arduino 5V linear regulator can produce.
* more current than the Arduino 5V linear regulator can produce.
* *** CAUTION ***
*
* LED Type. Enable only one of the following two options.

View file

@ -570,11 +570,9 @@
//#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
/**
* This option allows you to easily reprint the same SD Card file as
* was last printed. At the end of a print, the LCD Menu will jump
* straight to the file previously selected. A single click of the encoder
* wheel will restart the print. Another file or LCD option can be
* selected by using the encoder wheel to navigate through the menu structure.
* This option makes it easier to print the same SD Card file again.
* On print completion the LCD Menu will open with the file selected.
* You can just click to start the print, or navigate elsewhere.
*/
//#define SD_REPRINT_LAST_SELECTED_FILE

View file

@ -860,7 +860,7 @@
* - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
* A comprehensive bed leveling system combining the features and benefits
* of other systems. UBL also includes integrated Mesh Generation, Mesh
* Validation and Mesh Editing systems.
* Validation and Mesh Editing systems.
*
* - MESH_BED_LEVELING
* Probe a grid manually
@ -1626,7 +1626,7 @@
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* NOTE: A separate 5V power supply is required! The Neopixel LED needs
* more current than the Arduino 5V linear regulator can produce.
* more current than the Arduino 5V linear regulator can produce.
* *** CAUTION ***
*
* LED Type. Enable only one of the following two options.

View file

@ -570,11 +570,9 @@
//#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
/**
* This option allows you to easily reprint the same SD Card file as
* was last printed. At the end of a print, the LCD Menu will jump
* straight to the file previously selected. A single click of the encoder
* wheel will restart the print. Another file or LCD option can be
* selected by using the encoder wheel to navigate through the menu structure.
* This option makes it easier to print the same SD Card file again.
* On print completion the LCD Menu will open with the file selected.
* You can just click to start the print, or navigate elsewhere.
*/
//#define SD_REPRINT_LAST_SELECTED_FILE

View file

@ -845,7 +845,7 @@
* - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
* A comprehensive bed leveling system combining the features and benefits
* of other systems. UBL also includes integrated Mesh Generation, Mesh
* Validation and Mesh Editing systems.
* Validation and Mesh Editing systems.
*
* - MESH_BED_LEVELING
* Probe a grid manually
@ -1609,7 +1609,7 @@
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* NOTE: A separate 5V power supply is required! The Neopixel LED needs
* more current than the Arduino 5V linear regulator can produce.
* more current than the Arduino 5V linear regulator can produce.
* *** CAUTION ***
*
* LED Type. Enable only one of the following two options.

View file

@ -570,11 +570,9 @@
//#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
/**
* This option allows you to easily reprint the same SD Card file as
* was last printed. At the end of a print, the LCD Menu will jump
* straight to the file previously selected. A single click of the encoder
* wheel will restart the print. Another file or LCD option can be
* selected by using the encoder wheel to navigate through the menu structure.
* This option makes it easier to print the same SD Card file again.
* On print completion the LCD Menu will open with the file selected.
* You can just click to start the print, or navigate elsewhere.
*/
//#define SD_REPRINT_LAST_SELECTED_FILE

View file

@ -1619,7 +1619,7 @@
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* NOTE: A separate 5V power supply is required! The Neopixel LED needs
* more current than the Arduino 5V linear regulator can produce.
* more current than the Arduino 5V linear regulator can produce.
* *** CAUTION ***
*
* LED Type. Enable only one of the following two options.

View file

@ -567,11 +567,9 @@
//#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
/**
* This option allows you to easily reprint the same SD Card file as
* was last printed. At the end of a print, the LCD Menu will jump
* straight to the file previously selected. A single click of the encoder
* wheel will restart the print. Another file or LCD option can be
* selected by using the encoder wheel to navigate through the menu structure.
* This option makes it easier to print the same SD Card file again.
* On print completion the LCD Menu will open with the file selected.
* You can just click to start the print, or navigate elsewhere.
*/
//#define SD_REPRINT_LAST_SELECTED_FILE

View file

@ -845,7 +845,7 @@
* - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
* A comprehensive bed leveling system combining the features and benefits
* of other systems. UBL also includes integrated Mesh Generation, Mesh
* Validation and Mesh Editing systems.
* Validation and Mesh Editing systems.
*
* - MESH_BED_LEVELING
* Probe a grid manually
@ -1609,7 +1609,7 @@
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* NOTE: A separate 5V power supply is required! The Neopixel LED needs
* more current than the Arduino 5V linear regulator can produce.
* more current than the Arduino 5V linear regulator can produce.
* *** CAUTION ***
*
* LED Type. Enable only one of the following two options.

View file

@ -570,11 +570,9 @@
//#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
/**
* This option allows you to easily reprint the same SD Card file as
* was last printed. At the end of a print, the LCD Menu will jump
* straight to the file previously selected. A single click of the encoder
* wheel will restart the print. Another file or LCD option can be
* selected by using the encoder wheel to navigate through the menu structure.
* This option makes it easier to print the same SD Card file again.
* On print completion the LCD Menu will open with the file selected.
* You can just click to start the print, or navigate elsewhere.
*/
//#define SD_REPRINT_LAST_SELECTED_FILE

View file

@ -853,7 +853,7 @@
* - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
* A comprehensive bed leveling system combining the features and benefits
* of other systems. UBL also includes integrated Mesh Generation, Mesh
* Validation and Mesh Editing systems.
* Validation and Mesh Editing systems.
*
* - MESH_BED_LEVELING
* Probe a grid manually
@ -1617,7 +1617,7 @@
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* NOTE: A separate 5V power supply is required! The Neopixel LED needs
* more current than the Arduino 5V linear regulator can produce.
* more current than the Arduino 5V linear regulator can produce.
* *** CAUTION ***
*
* LED Type. Enable only one of the following two options.

View file

@ -570,11 +570,9 @@
//#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
/**
* This option allows you to easily reprint the same SD Card file as
* was last printed. At the end of a print, the LCD Menu will jump
* straight to the file previously selected. A single click of the encoder
* wheel will restart the print. Another file or LCD option can be
* selected by using the encoder wheel to navigate through the menu structure.
* This option makes it easier to print the same SD Card file again.
* On print completion the LCD Menu will open with the file selected.
* You can just click to start the print, or navigate elsewhere.
*/
//#define SD_REPRINT_LAST_SELECTED_FILE

View file

@ -864,7 +864,7 @@
* - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
* A comprehensive bed leveling system combining the features and benefits
* of other systems. UBL also includes integrated Mesh Generation, Mesh
* Validation and Mesh Editing systems.
* Validation and Mesh Editing systems.
*
* - MESH_BED_LEVELING
* Probe a grid manually
@ -1628,7 +1628,7 @@
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* NOTE: A separate 5V power supply is required! The Neopixel LED needs
* more current than the Arduino 5V linear regulator can produce.
* more current than the Arduino 5V linear regulator can produce.
* *** CAUTION ***
*
* LED Type. Enable only one of the following two options.

View file

@ -570,11 +570,9 @@
//#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
/**
* This option allows you to easily reprint the same SD Card file as
* was last printed. At the end of a print, the LCD Menu will jump
* straight to the file previously selected. A single click of the encoder
* wheel will restart the print. Another file or LCD option can be
* selected by using the encoder wheel to navigate through the menu structure.
* This option makes it easier to print the same SD Card file again.
* On print completion the LCD Menu will open with the file selected.
* You can just click to start the print, or navigate elsewhere.
*/
//#define SD_REPRINT_LAST_SELECTED_FILE

View file

@ -836,7 +836,7 @@
* - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
* A comprehensive bed leveling system combining the features and benefits
* of other systems. UBL also includes integrated Mesh Generation, Mesh
* Validation and Mesh Editing systems.
* Validation and Mesh Editing systems.
*
* - MESH_BED_LEVELING
* Probe a grid manually
@ -1600,7 +1600,7 @@
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* NOTE: A separate 5V power supply is required! The Neopixel LED needs
* more current than the Arduino 5V linear regulator can produce.
* more current than the Arduino 5V linear regulator can produce.
* *** CAUTION ***
*
* LED Type. Enable only one of the following two options.

View file

@ -570,11 +570,9 @@
//#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
/**
* This option allows you to easily reprint the same SD Card file as
* was last printed. At the end of a print, the LCD Menu will jump
* straight to the file previously selected. A single click of the encoder
* wheel will restart the print. Another file or LCD option can be
* selected by using the encoder wheel to navigate through the menu structure.
* This option makes it easier to print the same SD Card file again.
* On print completion the LCD Menu will open with the file selected.
* You can just click to start the print, or navigate elsewhere.
*/
//#define SD_REPRINT_LAST_SELECTED_FILE

View file

@ -836,7 +836,7 @@
* - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
* A comprehensive bed leveling system combining the features and benefits
* of other systems. UBL also includes integrated Mesh Generation, Mesh
* Validation and Mesh Editing systems.
* Validation and Mesh Editing systems.
*
* - MESH_BED_LEVELING
* Probe a grid manually
@ -1600,7 +1600,7 @@
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* NOTE: A separate 5V power supply is required! The Neopixel LED needs
* more current than the Arduino 5V linear regulator can produce.
* more current than the Arduino 5V linear regulator can produce.
* *** CAUTION ***
*
* LED Type. Enable only one of the following two options.

View file

@ -851,7 +851,7 @@
* - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
* A comprehensive bed leveling system combining the features and benefits
* of other systems. UBL also includes integrated Mesh Generation, Mesh
* Validation and Mesh Editing systems.
* Validation and Mesh Editing systems.
*
* - MESH_BED_LEVELING
* Probe a grid manually
@ -1615,7 +1615,7 @@
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* NOTE: A separate 5V power supply is required! The Neopixel LED needs
* more current than the Arduino 5V linear regulator can produce.
* more current than the Arduino 5V linear regulator can produce.
* *** CAUTION ***
*
* LED Type. Enable only one of the following two options.

View file

@ -570,11 +570,9 @@
//#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
/**
* This option allows you to easily reprint the same SD Card file as
* was last printed. At the end of a print, the LCD Menu will jump
* straight to the file previously selected. A single click of the encoder
* wheel will restart the print. Another file or LCD option can be
* selected by using the encoder wheel to navigate through the menu structure.
* This option makes it easier to print the same SD Card file again.
* On print completion the LCD Menu will open with the file selected.
* You can just click to start the print, or navigate elsewhere.
*/
//#define SD_REPRINT_LAST_SELECTED_FILE

View file

@ -869,7 +869,7 @@
* - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
* A comprehensive bed leveling system combining the features and benefits
* of other systems. UBL also includes integrated Mesh Generation, Mesh
* Validation and Mesh Editing systems.
* Validation and Mesh Editing systems.
*
* - MESH_BED_LEVELING
* Probe a grid manually
@ -1633,7 +1633,7 @@
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* NOTE: A separate 5V power supply is required! The Neopixel LED needs
* more current than the Arduino 5V linear regulator can produce.
* more current than the Arduino 5V linear regulator can produce.
* *** CAUTION ***
*
* LED Type. Enable only one of the following two options.

View file

@ -854,7 +854,7 @@
* - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
* A comprehensive bed leveling system combining the features and benefits
* of other systems. UBL also includes integrated Mesh Generation, Mesh
* Validation and Mesh Editing systems.
* Validation and Mesh Editing systems.
*
* - MESH_BED_LEVELING
* Probe a grid manually
@ -1618,7 +1618,7 @@
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* NOTE: A separate 5V power supply is required! The Neopixel LED needs
* more current than the Arduino 5V linear regulator can produce.
* more current than the Arduino 5V linear regulator can produce.
* *** CAUTION ***
*
* LED Type. Enable only one of the following two options.

View file

@ -858,7 +858,7 @@
* - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
* A comprehensive bed leveling system combining the features and benefits
* of other systems. UBL also includes integrated Mesh Generation, Mesh
* Validation and Mesh Editing systems.
* Validation and Mesh Editing systems.
*
* - MESH_BED_LEVELING
* Probe a grid manually
@ -1622,7 +1622,7 @@
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* NOTE: A separate 5V power supply is required! The Neopixel LED needs
* more current than the Arduino 5V linear regulator can produce.
* more current than the Arduino 5V linear regulator can produce.
* *** CAUTION ***
*
* LED Type. Enable only one of the following two options.

View file

@ -570,11 +570,9 @@
//#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
/**
* This option allows you to easily reprint the same SD Card file as
* was last printed. At the end of a print, the LCD Menu will jump
* straight to the file previously selected. A single click of the encoder
* wheel will restart the print. Another file or LCD option can be
* selected by using the encoder wheel to navigate through the menu structure.
* This option makes it easier to print the same SD Card file again.
* On print completion the LCD Menu will open with the file selected.
* You can just click to start the print, or navigate elsewhere.
*/
//#define SD_REPRINT_LAST_SELECTED_FILE

View file

@ -878,7 +878,7 @@
* - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
* A comprehensive bed leveling system combining the features and benefits
* of other systems. UBL also includes integrated Mesh Generation, Mesh
* Validation and Mesh Editing systems.
* Validation and Mesh Editing systems.
*
* - MESH_BED_LEVELING
* Probe a grid manually
@ -1646,7 +1646,7 @@
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* NOTE: A separate 5V power supply is required! The Neopixel LED needs
* more current than the Arduino 5V linear regulator can produce.
* more current than the Arduino 5V linear regulator can produce.
* *** CAUTION ***
*
* LED Type. Enable only one of the following two options.

View file

@ -564,11 +564,9 @@
//#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
/**
* This option allows you to easily reprint the same SD Card file as
* was last printed. At the end of a print, the LCD Menu will jump
* straight to the file previously selected. A single click of the encoder
* wheel will restart the print. Another file or LCD option can be
* selected by using the encoder wheel to navigate through the menu structure.
* This option makes it easier to print the same SD Card file again.
* On print completion the LCD Menu will open with the file selected.
* You can just click to start the print, or navigate elsewhere.
*/
//#define SD_REPRINT_LAST_SELECTED_FILE

View file

@ -858,7 +858,7 @@
* - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
* A comprehensive bed leveling system combining the features and benefits
* of other systems. UBL also includes integrated Mesh Generation, Mesh
* Validation and Mesh Editing systems.
* Validation and Mesh Editing systems.
*
* - MESH_BED_LEVELING
* Probe a grid manually
@ -1622,7 +1622,7 @@
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* NOTE: A separate 5V power supply is required! The Neopixel LED needs
* more current than the Arduino 5V linear regulator can produce.
* more current than the Arduino 5V linear regulator can produce.
* *** CAUTION ***
*
* LED Type. Enable only one of the following two options.

View file

@ -858,7 +858,7 @@
* - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
* A comprehensive bed leveling system combining the features and benefits
* of other systems. UBL also includes integrated Mesh Generation, Mesh
* Validation and Mesh Editing systems.
* Validation and Mesh Editing systems.
*
* - MESH_BED_LEVELING
* Probe a grid manually
@ -1622,7 +1622,7 @@
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* NOTE: A separate 5V power supply is required! The Neopixel LED needs
* more current than the Arduino 5V linear regulator can produce.
* more current than the Arduino 5V linear regulator can produce.
* *** CAUTION ***
*
* LED Type. Enable only one of the following two options.

View file

@ -571,11 +571,9 @@
//#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
/**
* This option allows you to easily reprint the same SD Card file as
* was last printed. At the end of a print, the LCD Menu will jump
* straight to the file previously selected. A single click of the encoder
* wheel will restart the print. Another file or LCD option can be
* selected by using the encoder wheel to navigate through the menu structure.
* This option makes it easier to print the same SD Card file again.
* On print completion the LCD Menu will open with the file selected.
* You can just click to start the print, or navigate elsewhere.
*/
//#define SD_REPRINT_LAST_SELECTED_FILE

View file

@ -856,7 +856,7 @@
* - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
* A comprehensive bed leveling system combining the features and benefits
* of other systems. UBL also includes integrated Mesh Generation, Mesh
* Validation and Mesh Editing systems.
* Validation and Mesh Editing systems.
*
* - MESH_BED_LEVELING
* Probe a grid manually
@ -1594,7 +1594,7 @@
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* NOTE: A separate 5V power supply is required! The Neopixel LED needs
* more current than the Arduino 5V linear regulator can produce.
* more current than the Arduino 5V linear regulator can produce.
* *** CAUTION ***
*
* LED Type. Enable only one of the following two options.

View file

@ -570,11 +570,9 @@
//#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
/**
* This option allows you to easily reprint the same SD Card file as
* was last printed. At the end of a print, the LCD Menu will jump
* straight to the file previously selected. A single click of the encoder
* wheel will restart the print. Another file or LCD option can be
* selected by using the encoder wheel to navigate through the menu structure.
* This option makes it easier to print the same SD Card file again.
* On print completion the LCD Menu will open with the file selected.
* You can just click to start the print, or navigate elsewhere.
*/
//#define SD_REPRINT_LAST_SELECTED_FILE

View file

@ -854,7 +854,7 @@
* - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
* A comprehensive bed leveling system combining the features and benefits
* of other systems. UBL also includes integrated Mesh Generation, Mesh
* Validation and Mesh Editing systems.
* Validation and Mesh Editing systems.
*
* - MESH_BED_LEVELING
* Probe a grid manually
@ -1618,7 +1618,7 @@
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* NOTE: A separate 5V power supply is required! The Neopixel LED needs
* more current than the Arduino 5V linear regulator can produce.
* more current than the Arduino 5V linear regulator can produce.
* *** CAUTION ***
*
* LED Type. Enable only one of the following two options.

View file

@ -1618,7 +1618,7 @@
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* NOTE: A separate 5V power supply is required! The Neopixel LED needs
* more current than the Arduino 5V linear regulator can produce.
* more current than the Arduino 5V linear regulator can produce.
* *** CAUTION ***
*
* LED Type. Enable only one of the following two options.

View file

@ -570,11 +570,9 @@
//#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
/**
* This option allows you to easily reprint the same SD Card file as
* was last printed. At the end of a print, the LCD Menu will jump
* straight to the file previously selected. A single click of the encoder
* wheel will restart the print. Another file or LCD option can be
* selected by using the encoder wheel to navigate through the menu structure.
* This option makes it easier to print the same SD Card file again.
* On print completion the LCD Menu will open with the file selected.
* You can just click to start the print, or navigate elsewhere.
*/
//#define SD_REPRINT_LAST_SELECTED_FILE

View file

@ -1630,7 +1630,7 @@
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* NOTE: A separate 5V power supply is required! The Neopixel LED needs
* more current than the Arduino 5V linear regulator can produce.
* more current than the Arduino 5V linear regulator can produce.
* *** CAUTION ***
*
* LED Type. Enable only one of the following two options.

View file

@ -570,11 +570,9 @@
//#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
/**
* This option allows you to easily reprint the same SD Card file as
* was last printed. At the end of a print, the LCD Menu will jump
* straight to the file previously selected. A single click of the encoder
* wheel will restart the print. Another file or LCD option can be
* selected by using the encoder wheel to navigate through the menu structure.
* This option makes it easier to print the same SD Card file again.
* On print completion the LCD Menu will open with the file selected.
* You can just click to start the print, or navigate elsewhere.
*/
//#define SD_REPRINT_LAST_SELECTED_FILE

View file

@ -1649,7 +1649,7 @@
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* NOTE: A separate 5V power supply is required! The Neopixel LED needs
* more current than the Arduino 5V linear regulator can produce.
* more current than the Arduino 5V linear regulator can produce.
* *** CAUTION ***
*
* LED Type. Enable only one of the following two options.

View file

@ -559,11 +559,9 @@
//#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
/**
* This option allows you to easily reprint the same SD Card file as
* was last printed. At the end of a print, the LCD Menu will jump
* straight to the file previously selected. A single click of the encoder
* wheel will restart the print. Another file or LCD option can be
* selected by using the encoder wheel to navigate through the menu structure.
* This option makes it easier to print the same SD Card file again.
* On print completion the LCD Menu will open with the file selected.
* You can just click to start the print, or navigate elsewhere.
*/
//#define SD_REPRINT_LAST_SELECTED_FILE

View file

@ -1674,7 +1674,7 @@
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* NOTE: A separate 5V power supply is required! The Neopixel LED needs
* more current than the Arduino 5V linear regulator can produce.
* more current than the Arduino 5V linear regulator can produce.
* *** CAUTION ***
*
* LED Type. Enable only one of the following two options.

View file

@ -570,11 +570,9 @@
//#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
/**
* This option allows you to easily reprint the same SD Card file as
* was last printed. At the end of a print, the LCD Menu will jump
* straight to the file previously selected. A single click of the encoder
* wheel will restart the print. Another file or LCD option can be
* selected by using the encoder wheel to navigate through the menu structure.
* This option makes it easier to print the same SD Card file again.
* On print completion the LCD Menu will open with the file selected.
* You can just click to start the print, or navigate elsewhere.
*/
//#define SD_REPRINT_LAST_SELECTED_FILE

View file

@ -1653,7 +1653,7 @@
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* NOTE: A separate 5V power supply is required! The Neopixel LED needs
* more current than the Arduino 5V linear regulator can produce.
* more current than the Arduino 5V linear regulator can produce.
* *** CAUTION ***
*
* LED Type. Enable only one of the following two options.

View file

@ -578,11 +578,9 @@
//#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
/**
* This option allows you to easily reprint the same SD Card file as
* was last printed. At the end of a print, the LCD Menu will jump
* straight to the file previously selected. A single click of the encoder
* wheel will restart the print. Another file or LCD option can be
* selected by using the encoder wheel to navigate through the menu structure.
* This option makes it easier to print the same SD Card file again.
* On print completion the LCD Menu will open with the file selected.
* You can just click to start the print, or navigate elsewhere.
*/
//#define SD_REPRINT_LAST_SELECTED_FILE

View file

@ -1618,7 +1618,7 @@
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* NOTE: A separate 5V power supply is required! The Neopixel LED needs
* more current than the Arduino 5V linear regulator can produce.
* more current than the Arduino 5V linear regulator can produce.
* *** CAUTION ***
*
* LED Type. Enable only one of the following two options.

View file

@ -570,11 +570,9 @@
//#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
/**
* This option allows you to easily reprint the same SD Card file as
* was last printed. At the end of a print, the LCD Menu will jump
* straight to the file previously selected. A single click of the encoder
* wheel will restart the print. Another file or LCD option can be
* selected by using the encoder wheel to navigate through the menu structure.
* This option makes it easier to print the same SD Card file again.
* On print completion the LCD Menu will open with the file selected.
* You can just click to start the print, or navigate elsewhere.
*/
//#define SD_REPRINT_LAST_SELECTED_FILE

View file

@ -1618,7 +1618,7 @@
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* NOTE: A separate 5V power supply is required! The Neopixel LED needs
* more current than the Arduino 5V linear regulator can produce.
* more current than the Arduino 5V linear regulator can produce.
* *** CAUTION ***
*
* LED Type. Enable only one of the following two options.

View file

@ -854,7 +854,7 @@
* - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
* A comprehensive bed leveling system combining the features and benefits
* of other systems. UBL also includes integrated Mesh Generation, Mesh
* Validation and Mesh Editing systems.
* Validation and Mesh Editing systems.
*
* - MESH_BED_LEVELING
* Probe a grid manually
@ -1618,7 +1618,7 @@
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* NOTE: A separate 5V power supply is required! The Neopixel LED needs
* more current than the Arduino 5V linear regulator can produce.
* more current than the Arduino 5V linear regulator can produce.
* *** CAUTION ***
*
* LED Type. Enable only one of the following two options.

View file

@ -978,7 +978,7 @@
* - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
* A comprehensive bed leveling system combining the features and benefits
* of other systems. UBL also includes integrated Mesh Generation, Mesh
* Validation and Mesh Editing systems.
* Validation and Mesh Editing systems.
*
* - MESH_BED_LEVELING
* Probe a grid manually
@ -1746,7 +1746,7 @@
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* NOTE: A separate 5V power supply is required! The Neopixel LED needs
* more current than the Arduino 5V linear regulator can produce.
* more current than the Arduino 5V linear regulator can produce.
* *** CAUTION ***
*
* LED Type. Enable only one of the following two options.

View file

@ -572,11 +572,9 @@
//#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
/**
* This option allows you to easily reprint the same SD Card file as
* was last printed. At the end of a print, the LCD Menu will jump
* straight to the file previously selected. A single click of the encoder
* wheel will restart the print. Another file or LCD option can be
* selected by using the encoder wheel to navigate through the menu structure.
* This option makes it easier to print the same SD Card file again.
* On print completion the LCD Menu will open with the file selected.
* You can just click to start the print, or navigate elsewhere.
*/
//#define SD_REPRINT_LAST_SELECTED_FILE

View file

@ -978,7 +978,7 @@
* - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
* A comprehensive bed leveling system combining the features and benefits
* of other systems. UBL also includes integrated Mesh Generation, Mesh
* Validation and Mesh Editing systems.
* Validation and Mesh Editing systems.
*
* - MESH_BED_LEVELING
* Probe a grid manually
@ -1739,7 +1739,7 @@
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* NOTE: A separate 5V power supply is required! The Neopixel LED needs
* more current than the Arduino 5V linear regulator can produce.
* more current than the Arduino 5V linear regulator can produce.
* *** CAUTION ***
*
* LED Type. Enable only one of the following two options.

View file

@ -572,11 +572,9 @@
//#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
/**
* This option allows you to easily reprint the same SD Card file as
* was last printed. At the end of a print, the LCD Menu will jump
* straight to the file previously selected. A single click of the encoder
* wheel will restart the print. Another file or LCD option can be
* selected by using the encoder wheel to navigate through the menu structure.
* This option makes it easier to print the same SD Card file again.
* On print completion the LCD Menu will open with the file selected.
* You can just click to start the print, or navigate elsewhere.
*/
//#define SD_REPRINT_LAST_SELECTED_FILE

View file

@ -965,7 +965,7 @@
* - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
* A comprehensive bed leveling system combining the features and benefits
* of other systems. UBL also includes integrated Mesh Generation, Mesh
* Validation and Mesh Editing systems.
* Validation and Mesh Editing systems.
*
* - MESH_BED_LEVELING
* Probe a grid manually
@ -1734,7 +1734,7 @@
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* NOTE: A separate 5V power supply is required! The Neopixel LED needs
* more current than the Arduino 5V linear regulator can produce.
* more current than the Arduino 5V linear regulator can produce.
* *** CAUTION ***
*
* LED Type. Enable only one of the following two options.

View file

@ -572,11 +572,9 @@
//#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
/**
* This option allows you to easily reprint the same SD Card file as
* was last printed. At the end of a print, the LCD Menu will jump
* straight to the file previously selected. A single click of the encoder
* wheel will restart the print. Another file or LCD option can be
* selected by using the encoder wheel to navigate through the menu structure.
* This option makes it easier to print the same SD Card file again.
* On print completion the LCD Menu will open with the file selected.
* You can just click to start the print, or navigate elsewhere.
*/
//#define SD_REPRINT_LAST_SELECTED_FILE

View file

@ -1737,7 +1737,7 @@
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* NOTE: A separate 5V power supply is required! The Neopixel LED needs
* more current than the Arduino 5V linear regulator can produce.
* more current than the Arduino 5V linear regulator can produce.
* *** CAUTION ***
*
* LED Type. Enable only one of the following two options.

View file

@ -572,11 +572,9 @@
//#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
/**
* This option allows you to easily reprint the same SD Card file as
* was last printed. At the end of a print, the LCD Menu will jump
* straight to the file previously selected. A single click of the encoder
* wheel will restart the print. Another file or LCD option can be
* selected by using the encoder wheel to navigate through the menu structure.
* This option makes it easier to print the same SD Card file again.
* On print completion the LCD Menu will open with the file selected.
* You can just click to start the print, or navigate elsewhere.
*/
//#define SD_REPRINT_LAST_SELECTED_FILE

View file

@ -968,7 +968,7 @@
* - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
* A comprehensive bed leveling system combining the features and benefits
* of other systems. UBL also includes integrated Mesh Generation, Mesh
* Validation and Mesh Editing systems.
* Validation and Mesh Editing systems.
*
* - MESH_BED_LEVELING
* Probe a grid manually
@ -1737,7 +1737,7 @@
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* NOTE: A separate 5V power supply is required! The Neopixel LED needs
* more current than the Arduino 5V linear regulator can produce.
* more current than the Arduino 5V linear regulator can produce.
* *** CAUTION ***
*
* LED Type. Enable only one of the following two options.

View file

@ -577,11 +577,9 @@
//#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
/**
* This option allows you to easily reprint the same SD Card file as
* was last printed. At the end of a print, the LCD Menu will jump
* straight to the file previously selected. A single click of the encoder
* wheel will restart the print. Another file or LCD option can be
* selected by using the encoder wheel to navigate through the menu structure.
* This option makes it easier to print the same SD Card file again.
* On print completion the LCD Menu will open with the file selected.
* You can just click to start the print, or navigate elsewhere.
*/
//#define SD_REPRINT_LAST_SELECTED_FILE

View file

@ -977,7 +977,7 @@
* - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
* A comprehensive bed leveling system combining the features and benefits
* of other systems. UBL also includes integrated Mesh Generation, Mesh
* Validation and Mesh Editing systems.
* Validation and Mesh Editing systems.
*
* - MESH_BED_LEVELING
* Probe a grid manually
@ -1746,7 +1746,7 @@
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* NOTE: A separate 5V power supply is required! The Neopixel LED needs
* more current than the Arduino 5V linear regulator can produce.
* more current than the Arduino 5V linear regulator can produce.
* *** CAUTION ***
*
* LED Type. Enable only one of the following two options.

View file

@ -572,11 +572,9 @@
//#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
/**
* This option allows you to easily reprint the same SD Card file as
* was last printed. At the end of a print, the LCD Menu will jump
* straight to the file previously selected. A single click of the encoder
* wheel will restart the print. Another file or LCD option can be
* selected by using the encoder wheel to navigate through the menu structure.
* This option makes it easier to print the same SD Card file again.
* On print completion the LCD Menu will open with the file selected.
* You can just click to start the print, or navigate elsewhere.
*/
//#define SD_REPRINT_LAST_SELECTED_FILE

View file

@ -868,7 +868,7 @@
* - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
* A comprehensive bed leveling system combining the features and benefits
* of other systems. UBL also includes integrated Mesh Generation, Mesh
* Validation and Mesh Editing systems.
* Validation and Mesh Editing systems.
*
* - MESH_BED_LEVELING
* Probe a grid manually
@ -1632,7 +1632,7 @@
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* NOTE: A separate 5V power supply is required! The Neopixel LED needs
* more current than the Arduino 5V linear regulator can produce.
* more current than the Arduino 5V linear regulator can produce.
* *** CAUTION ***
*
* LED Type. Enable only one of the following two options.

View file

@ -570,11 +570,9 @@
//#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
/**
* This option allows you to easily reprint the same SD Card file as
* was last printed. At the end of a print, the LCD Menu will jump
* straight to the file previously selected. A single click of the encoder
* wheel will restart the print. Another file or LCD option can be
* selected by using the encoder wheel to navigate through the menu structure.
* This option makes it easier to print the same SD Card file again.
* On print completion the LCD Menu will open with the file selected.
* You can just click to start the print, or navigate elsewhere.
*/
//#define SD_REPRINT_LAST_SELECTED_FILE

View file

@ -857,7 +857,7 @@
* - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
* A comprehensive bed leveling system combining the features and benefits
* of other systems. UBL also includes integrated Mesh Generation, Mesh
* Validation and Mesh Editing systems.
* Validation and Mesh Editing systems.
*
* - MESH_BED_LEVELING
* Probe a grid manually
@ -1621,7 +1621,7 @@
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* NOTE: A separate 5V power supply is required! The Neopixel LED needs
* more current than the Arduino 5V linear regulator can produce.
* more current than the Arduino 5V linear regulator can produce.
* *** CAUTION ***
*
* LED Type. Enable only one of the following two options.

View file

@ -570,11 +570,9 @@
//#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
/**
* This option allows you to easily reprint the same SD Card file as
* was last printed. At the end of a print, the LCD Menu will jump
* straight to the file previously selected. A single click of the encoder
* wheel will restart the print. Another file or LCD option can be
* selected by using the encoder wheel to navigate through the menu structure.
* This option makes it easier to print the same SD Card file again.
* On print completion the LCD Menu will open with the file selected.
* You can just click to start the print, or navigate elsewhere.
*/
//#define SD_REPRINT_LAST_SELECTED_FILE

View file

@ -1621,7 +1621,7 @@
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* NOTE: A separate 5V power supply is required! The Neopixel LED needs
* more current than the Arduino 5V linear regulator can produce.
* more current than the Arduino 5V linear regulator can produce.
* *** CAUTION ***
*
* LED Type. Enable only one of the following two options.

View file

@ -1613,7 +1613,7 @@
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* NOTE: A separate 5V power supply is required! The Neopixel LED needs
* more current than the Arduino 5V linear regulator can produce.
* more current than the Arduino 5V linear regulator can produce.
* *** CAUTION ***
*
* LED Type. Enable only one of the following two options.

View file

@ -570,11 +570,9 @@
//#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
/**
* This option allows you to easily reprint the same SD Card file as
* was last printed. At the end of a print, the LCD Menu will jump
* straight to the file previously selected. A single click of the encoder
* wheel will restart the print. Another file or LCD option can be
* selected by using the encoder wheel to navigate through the menu structure.
* This option makes it easier to print the same SD Card file again.
* On print completion the LCD Menu will open with the file selected.
* You can just click to start the print, or navigate elsewhere.
*/
//#define SD_REPRINT_LAST_SELECTED_FILE

View file

@ -1623,7 +1623,7 @@
* as the Arduino cannot handle the current the LEDs will require.
* Failure to follow this precaution can destroy your Arduino!
* NOTE: A separate 5V power supply is required! The Neopixel LED needs
* more current than the Arduino 5V linear regulator can produce.
* more current than the Arduino 5V linear regulator can produce.
* *** CAUTION ***
*
* LED Type. Enable only one of the following two options.

View file

@ -570,11 +570,9 @@
//#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
/**
* This option allows you to easily reprint the same SD Card file as
* was last printed. At the end of a print, the LCD Menu will jump
* straight to the file previously selected. A single click of the encoder
* wheel will restart the print. Another file or LCD option can be
* selected by using the encoder wheel to navigate through the menu structure.
* This option makes it easier to print the same SD Card file again.
* On print completion the LCD Menu will open with the file selected.
* You can just click to start the print, or navigate elsewhere.
*/
//#define SD_REPRINT_LAST_SELECTED_FILE